summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2020-04-20xfrm: espintcp: save and call old ->sk_destructSabrina Dubroca
When ESP encapsulation is enabled on a TCP socket, I'm replacing the existing ->sk_destruct callback with espintcp_destruct. We still need to call the old callback to perform the other cleanups when the socket is destroyed. Save the old callback, and call it from espintcp_destruct. Fixes: e27cca96cd68 ("xfrm: add espintcp (RFC 8229)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-04-20xfrm: remove the xfrm_state_put call becofe going to out_resetXin Long
This xfrm_state_put call in esp4/6_gro_receive() will cause double put for state, as in out_reset path secpath_reset() will put all states set in skb sec_path. So fix it by simply remove the xfrm_state_put call. Fixes: 6ed69184ed9c ("xfrm: Reset secpath in xfrm failure") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-04-19netfilter: nat: fix error handling upon registering inet hookHillf Danton
A case of warning was reported by syzbot. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 19934 at net/netfilter/nf_nat_core.c:1106 nf_nat_unregister_fn+0x532/0x5c0 net/netfilter/nf_nat_core.c:1106 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 19934 Comm: syz-executor.5 Not tainted 5.6.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 panic+0x2e3/0x75c kernel/panic.c:221 __warn.cold+0x2f/0x35 kernel/panic.c:582 report_bug+0x27b/0x2f0 lib/bug.c:195 fixup_bug arch/x86/kernel/traps.c:175 [inline] fixup_bug arch/x86/kernel/traps.c:170 [inline] do_error_trap+0x12b/0x220 arch/x86/kernel/traps.c:267 do_invalid_op+0x32/0x40 arch/x86/kernel/traps.c:286 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027 RIP: 0010:nf_nat_unregister_fn+0x532/0x5c0 net/netfilter/nf_nat_core.c:1106 Code: ff df 48 c1 ea 03 80 3c 02 00 75 75 48 8b 44 24 10 4c 89 ef 48 c7 00 00 00 00 00 e8 e8 f8 53 fb e9 4d fe ff ff e8 ee 9c 16 fb <0f> 0b e9 41 fe ff ff e8 e2 45 54 fb e9 b5 fd ff ff 48 8b 7c 24 20 RSP: 0018:ffffc90005487208 EFLAGS: 00010246 RAX: 0000000000040000 RBX: 0000000000000004 RCX: ffffc9001444a000 RDX: 0000000000040000 RSI: ffffffff865c94a2 RDI: 0000000000000005 RBP: ffff88808b5cf000 R08: ffff8880a2620140 R09: fffffbfff14bcd79 R10: ffffc90005487208 R11: fffffbfff14bcd78 R12: 0000000000000000 R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000000 nf_nat_ipv6_unregister_fn net/netfilter/nf_nat_proto.c:1017 [inline] nf_nat_inet_register_fn net/netfilter/nf_nat_proto.c:1038 [inline] nf_nat_inet_register_fn+0xfc/0x140 net/netfilter/nf_nat_proto.c:1023 nf_tables_register_hook net/netfilter/nf_tables_api.c:224 [inline] nf_tables_addchain.constprop.0+0x82e/0x13c0 net/netfilter/nf_tables_api.c:1981 nf_tables_newchain+0xf68/0x16a0 net/netfilter/nf_tables_api.c:2235 nfnetlink_rcv_batch+0x83a/0x1610 net/netfilter/nfnetlink.c:433 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:543 [inline] nfnetlink_rcv+0x3af/0x420 net/netfilter/nfnetlink.c:561 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6bf/0x7e0 net/socket.c:2362 ___sys_sendmsg+0x100/0x170 net/socket.c:2416 __sys_sendmsg+0xec/0x1b0 net/socket.c:2449 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 and to quiesce it, unregister NFPROTO_IPV6 hook instead of NFPROTO_INET in case of failing to register NFPROTO_IPV4 hook. Reported-by: syzbot <syzbot+33e06702fd6cffc24c40@syzkaller.appspotmail.com> Fixes: d164385ec572 ("netfilter: nat: add inet family nat support") Cc: Florian Westphal <fw@strlen.de> Cc: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-04-18mptcp: fix 'Attempt to release TCP socket in state' warningsFlorian Westphal
We need to set sk_state to CLOSED, else we will get following: IPv4: Attempt to release TCP socket in state 3 00000000b95f109e IPv4: Attempt to release TCP socket in state 10 00000000b95f109e First one is from inet_sock_destruct(), second one from mptcp_sk_clone failure handling. Setting sk_state to CLOSED isn't enough, we also need to orphan sk so it has DEAD flag set. Otherwise, a very similar warning is printed from inet_sock_destruct(). Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-18mptcp: fix splat when incoming connection is never accepted before exit/closeFlorian Westphal
Following snippet (replicated from syzkaller reproducer) generates warning: "IPv4: Attempt to release TCP socket in state 1". int main(void) { struct sockaddr_in sin1 = { .sin_family = 2, .sin_port = 0x4e20, .sin_addr.s_addr = 0x010000e0, }; struct sockaddr_in sin2 = { .sin_family = 2, .sin_addr.s_addr = 0x0100007f, }; struct sockaddr_in sin3 = { .sin_family = 2, .sin_port = 0x4e20, .sin_addr.s_addr = 0x0100007f, }; int r0 = socket(0x2, 0x1, 0x106); int r1 = socket(0x2, 0x1, 0x106); bind(r1, (void *)&sin1, sizeof(sin1)); connect(r1, (void *)&sin2, sizeof(sin2)); listen(r1, 3); return connect(r0, (void *)&sin3, 0x4d); } Reason is that the newly generated mptcp socket is closed via the ulp release of the tcp listener socket when its accept backlog gets purged. To fix this, delay setting the ESTABLISHED state until after userspace calls accept and via mptcp specific destructor. Fixes: 58b09919626bf ("mptcp: create msk early") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/9 Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-18ipv6: rpl: fix full address compressionAlexander Aring
This patch makes it impossible that cmpri or cmpre values are set to the value 16 which is not possible, because these are 4 bit values. We currently run in an overflow when assigning the value 16 to it. According to the standard a value of 16 can be interpreted as a full elided address which isn't possible to set as compression value. A reason why this cannot be set is that the current ipv6 header destination address should never show up inside the segments of the rpl header. In this case we run in a overflow and the address will have no compression at all. Means cmpri or compre is set to 0. As we handle cmpri and cmpre sometimes as unsigned char or 4 bit value inside the rpl header the current behaviour ends in an invalid header format. This patch simple use the best compression method if we ever run into the case that the destination address is showed up inside the rpl segments. We avoid the overflow handling and the rpl header is still valid, even when we have the destination address inside the rpl segments. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-18tipc: Fix potential tipc_node refcnt leak in tipc_rcvXiyu Yang
tipc_rcv() invokes tipc_node_find() twice, which returns a reference of the specified tipc_node object to "n" with increased refcnt. When tipc_rcv() returns or a new object is assigned to "n", the original local reference of "n" becomes invalid, so the refcount should be decreased to keep refcount balanced. The issue happens in some paths of tipc_rcv(), which forget to decrease the refcnt increased by tipc_node_find() and will cause a refcnt leak. Fix this issue by calling tipc_node_put() before the original object pointed by "n" becomes invalid. Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-18tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcvXiyu Yang
tipc_crypto_rcv() invokes tipc_aead_get(), which returns a reference of the tipc_aead object to "aead" with increased refcnt. When tipc_crypto_rcv() returns, the original local reference of "aead" becomes invalid, so the refcount should be decreased to keep refcount balanced. The issue happens in one error path of tipc_crypto_rcv(). When TIPC message decryption status is EINPROGRESS or EBUSY, the function forgets to decrease the refcnt increased by tipc_aead_get() and causes a refcnt leak. Fix this issue by calling tipc_aead_put() on the error path when TIPC message decryption status is EINPROGRESS or EBUSY. Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-18net: netrom: Fix potential nr_neigh refcnt leak in nr_add_nodeXiyu Yang
nr_add_node() invokes nr_neigh_get_dev(), which returns a local reference of the nr_neigh object to "nr_neigh" with increased refcnt. When nr_add_node() returns, "nr_neigh" becomes invalid, so the refcount should be decreased to keep refcount balanced. The issue happens in one normal path of nr_add_node(), which forgets to decrease the refcnt increased by nr_neigh_get_dev() and causes a refcnt leak. It should decrease the refcnt before the function returns like other normal paths do. Fix this issue by calling nr_neigh_put() before the nr_add_node() returns. Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-17svcrdma: Fix leak of svc_rdma_recv_ctxt objectsChuck Lever
Utilize the xpo_release_rqst transport method to ensure that each rqstp's svc_rdma_recv_ctxt object is released even when the server cannot return a Reply for that rqstp. Without this fix, each RPC whose Reply cannot be sent leaks one svc_rdma_recv_ctxt. This is a 2.5KB structure, a 4KB DMA-mapped Receive buffer, and any pages that might be part of the Reply message. The leak is infrequent unless the network fabric is unreliable or Kerberos is in use, as GSS sequence window overruns, which result in connection loss, are more common on fast transports. Fixes: 3a88092ee319 ("svcrdma: Preserve Receive buffer until svc_rdma_sendto") Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-04-17svcrdma: Fix trace point use-after-free raceChuck Lever
I hit this while testing nfsd-5.7 with kernel memory debugging enabled on my server: Mar 30 13:21:45 klimt kernel: BUG: unable to handle page fault for address: ffff8887e6c279a8 Mar 30 13:21:45 klimt kernel: #PF: supervisor read access in kernel mode Mar 30 13:21:45 klimt kernel: #PF: error_code(0x0000) - not-present page Mar 30 13:21:45 klimt kernel: PGD 3601067 P4D 3601067 PUD 87c519067 PMD 87c3e2067 PTE 800ffff8193d8060 Mar 30 13:21:45 klimt kernel: Oops: 0000 [#1] SMP DEBUG_PAGEALLOC PTI Mar 30 13:21:45 klimt kernel: CPU: 2 PID: 1933 Comm: nfsd Not tainted 5.6.0-rc6-00040-g881e87a3c6f9 #1591 Mar 30 13:21:45 klimt kernel: Hardware name: Supermicro Super Server/X10SRL-F, BIOS 1.0c 09/09/2015 Mar 30 13:21:45 klimt kernel: RIP: 0010:svc_rdma_post_chunk_ctxt+0xab/0x284 [rpcrdma] Mar 30 13:21:45 klimt kernel: Code: c1 83 34 02 00 00 29 d0 85 c0 7e 72 48 8b bb a0 02 00 00 48 8d 54 24 08 4c 89 e6 48 8b 07 48 8b 40 20 e8 5a 5c 2b e1 41 89 c6 <8b> 45 20 89 44 24 04 8b 05 02 e9 01 00 85 c0 7e 33 e9 5e 01 00 00 Mar 30 13:21:45 klimt kernel: RSP: 0018:ffffc90000dfbdd8 EFLAGS: 00010286 Mar 30 13:21:45 klimt kernel: RAX: 0000000000000000 RBX: ffff8887db8db400 RCX: 0000000000000030 Mar 30 13:21:45 klimt kernel: RDX: 0000000000000040 RSI: 0000000000000000 RDI: 0000000000000246 Mar 30 13:21:45 klimt kernel: RBP: ffff8887e6c27988 R08: 0000000000000000 R09: 0000000000000004 Mar 30 13:21:45 klimt kernel: R10: ffffc90000dfbdd8 R11: 00c068ef00000000 R12: ffff8887eb4e4a80 Mar 30 13:21:45 klimt kernel: R13: ffff8887db8db634 R14: 0000000000000000 R15: ffff8887fc931000 Mar 30 13:21:45 klimt kernel: FS: 0000000000000000(0000) GS:ffff88885bd00000(0000) knlGS:0000000000000000 Mar 30 13:21:45 klimt kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Mar 30 13:21:45 klimt kernel: CR2: ffff8887e6c279a8 CR3: 000000081b72e002 CR4: 00000000001606e0 Mar 30 13:21:45 klimt kernel: Call Trace: Mar 30 13:21:45 klimt kernel: ? svc_rdma_vec_to_sg+0x7f/0x7f [rpcrdma] Mar 30 13:21:45 klimt kernel: svc_rdma_send_write_chunk+0x59/0xce [rpcrdma] Mar 30 13:21:45 klimt kernel: svc_rdma_sendto+0xf9/0x3ae [rpcrdma] Mar 30 13:21:45 klimt kernel: ? nfsd_destroy+0x51/0x51 [nfsd] Mar 30 13:21:45 klimt kernel: svc_send+0x105/0x1e3 [sunrpc] Mar 30 13:21:45 klimt kernel: nfsd+0xf2/0x149 [nfsd] Mar 30 13:21:45 klimt kernel: kthread+0xf6/0xfb Mar 30 13:21:45 klimt kernel: ? kthread_queue_delayed_work+0x74/0x74 Mar 30 13:21:45 klimt kernel: ret_from_fork+0x3a/0x50 Mar 30 13:21:45 klimt kernel: Modules linked in: ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue ib_umad ib_ipoib mlx4_ib sb_edac x86_pkg_temp_thermal iTCO_wdt iTCO_vendor_support coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel glue_helper crypto_simd cryptd pcspkr rpcrdma i2c_i801 rdma_ucm lpc_ich mfd_core ib_iser rdma_cm iw_cm ib_cm mei_me raid0 libiscsi mei sg scsi_transport_iscsi ioatdma wmi ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter nfsd nfs_acl lockd auth_rpcgss grace sunrpc ip_tables xfs libcrc32c mlx4_en sd_mod sr_mod cdrom mlx4_core crc32c_intel igb nvme i2c_algo_bit ahci i2c_core libahci nvme_core dca libata t10_pi qedr dm_mirror dm_region_hash dm_log dm_mod dax qede qed crc8 ib_uverbs ib_core Mar 30 13:21:45 klimt kernel: CR2: ffff8887e6c279a8 Mar 30 13:21:45 klimt kernel: ---[ end trace 87971d2ad3429424 ]--- It's absolutely not safe to use resources pointed to by the @send_wr argument of ib_post_send() _after_ that function returns. Those resources are typically freed by the Send completion handler, which can run before ib_post_send() returns. Thus the trace points currently around ib_post_send() in the server's RPC/RDMA transport are a hazard, even when they are disabled. Rearrange them so that they touch the Work Request only _before_ ib_post_send() is invoked. Fixes: bd2abef33394 ("svcrdma: Trace key RDMA API events") Fixes: 4201c7464753 ("svcrdma: Introduce svc_rdma_send_ctxt") Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-04-17SUNRPC: Fix backchannel RPC soft lockupsChuck Lever
Currently, after the forward channel connection goes away, backchannel operations are causing soft lockups on the server because call_transmit_status's SOFTCONN logic ignores ENOTCONN. Such backchannel Calls are aggressively retried until the client reconnects. Backchannel Calls should use RPC_TASK_NOCONNECT rather than RPC_TASK_SOFTCONN. If there is no forward connection, the server is not capable of establishing a connection back to the client, thus that backchannel request should fail before the server attempts to send it. Commit 58255a4e3ce5 ("NFSD: NFSv4 callback client should use RPC_TASK_SOFTCONN") was merged several years before RPC_TASK_NOCONNECT was available. Because setup_callback_client() explicitly sets NOPING, the NFSv4.0 callback connection depends on the first callback RPC to initiate a connection to the client. Thus NFSv4.0 needs to continue to use RPC_TASK_SOFTCONN. Suggested-by: Trond Myklebust <trondmy@hammerspace.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: <stable@vger.kernel.org> # v4.20+
2020-04-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel. 2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet. 3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing. 4) Adjust icmp6 message source address selection when routes have a preferred source address set, from Tim Stallard. 5) Be sure to validate HSR protocol version when creating new links, from Taehee Yoo. 6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in non-initial namespaces, from Michael Weiß. 7) Missing release firmware call in mlx5, from Eran Ben Elisha. 8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from Taehee Yoo. 9) Fix pause frame negotiation in marvell phy driver, from Clemens Gruber. 10) Record RX queue early enough in tun packet paths such that XDP programs will see the correct RX queue index, from Gilberto Bertin. 11) Fix double unlock in mptcp, from Florian Westphal. 12) Fix offset overflow in ARM bpf JIT, from Luke Nelson. 13) marvell10g needs to soft reset PHY when coming out of low power mode, from Russell King. 14) Fix MTU setting regression in stmmac for some chip types, from Florian Fainelli. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits) amd-xgbe: Use __napi_schedule() in BH context mISDN: make dmril and dmrim static net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode tipc: fix incorrect increasing of link window Documentation: Fix tcp_challenge_ack_limit default value net: tulip: make early_486_chipsets static dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400 ipv6: remove redundant assignment to variable err net/rds: Use ERR_PTR for rds_message_alloc_sgs() net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge selftests/bpf: Check for correct program attach/detach in xdp_attach test libbpf: Fix type of old_fd in bpf_xdp_set_link_opts libbpf: Always specify expected_attach_type on program load if supported xsk: Add missing check on user supplied headroom size mac80211: fix channel switch trigger from unknown mesh peer mac80211: fix race in ieee80211_register_hw() net: marvell10g: soft-reset the PHY when coming out of low power net: marvell10g: report firmware version net/cxgb4: Check the return from t4_query_params properly ...
2020-04-15tipc: fix incorrect increasing of link windowTuong Lien
In commit 16ad3f4022bb ("tipc: introduce variable window congestion control"), we allow link window to change with the congestion avoidance algorithm. However, there is a bug that during the slow-start if packet retransmission occurs, the link will enter the fast-recovery phase, set its window to the 'ssthresh' which is never less than 300, so the link window suddenly increases to that limit instead of decreasing. Consequently, two issues have been observed: - For broadcast-link: it can leave a gap between the link queues that a new packet will be inserted and sent before the previous ones, i.e. not in-order. - For unicast: the algorithm does not work as expected, the link window jumps to the slow-start threshold whereas packet retransmission occurs. This commit fixes the issues by avoiding such the link window increase, but still decreasing if the 'ssthresh' is lowered. Fixes: 16ad3f4022bb ("tipc: introduce variable window congestion control") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-15ipv6: remove redundant assignment to variable errColin Ian King
The variable err is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-15net/rds: Use ERR_PTR for rds_message_alloc_sgs()Jason Gunthorpe
Returning the error code via a 'int *ret' when the function returns a pointer is very un-kernely and causes gcc 10's static analysis to choke: net/rds/message.c: In function ‘rds_message_map_pages’: net/rds/message.c:358:10: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized] 358 | return ERR_PTR(ret); Use a typical ERR_PTR return instead. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2020-04-15 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 3 day(s) which contain a total of 11 files changed, 238 insertions(+), 95 deletions(-). The main changes are: 1) Fix offset overflow for BPF_MEM BPF_DW insn mapping on arm32 JIT, from Luke Nelson and Xi Wang. 2) Prevent mprotect() to make frozen & mmap()'ed BPF map writeable again, from Andrii Nakryiko and Jann Horn. 3) Fix type of old_fd in bpf_xdp_set_link_opts to int in libbpf and add selftests, from Toke Høiland-Jørgensen. 4) Fix AF_XDP to check that headroom cannot be larger than the available space in the chunk, from Magnus Karlsson. 5) Fix reset of XDP prog when expected_fd is set, from David Ahern. 6) Fix a segfault in bpftool's struct_ops command when BTF is not available, from Daniel T. Lee. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-15Merge tag 'mac80211-for-net-2020-04-15' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A couple of fixes: * FTM responder policy netlink validation fix (but the only user validates again later) * kernel-doc fixes * a fix for a race in mac80211 radio registration vs. userspace * a mesh channel switch fix * a fix for a syzbot reported kasprintf() issue ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-15xsk: Add missing check on user supplied headroom sizeMagnus Karlsson
Add a check that the headroom cannot be larger than the available space in the chunk. In the current code, a malicious user can set the headroom to a value larger than the chunk size minus the fixed XDP headroom. That way packets with a length larger than the supported size in the umem could get accepted and result in an out-of-bounds write. Fixes: c0c77d8fb787 ("xsk: add user memory registration support sockopt") Reported-by: Bui Quang Minh <minhquangbui99@gmail.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=207225 Link: https://lore.kernel.org/bpf/1586849715-23490-1-git-send-email-magnus.karlsson@intel.com
2020-04-15mac80211: fix channel switch trigger from unknown mesh peerTamizh chelvam
Previously mesh channel switch happens if beacon contains CSA IE without checking the mesh peer info. Due to that channel switch happens even if the beacon is not from its own mesh peer. Fixing that by checking if the CSA originated from the same mesh network before proceeding for channel switch. Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org> Link: https://lore.kernel.org/r/1585403604-29274-1-git-send-email-tamizhr@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-15esp6: get the right proto for transport mode in esp6_gso_encapXin Long
For transport mode, when ipv6 nexthdr is set, the packet format might be like: ---------------------------------------------------- | | dest | | | | ESP | ESP | | IP6 hdr| opts.| ESP | TCP | Data | Trailer | ICV | ---------------------------------------------------- What it wants to get for x-proto in esp6_gso_encap() is the proto that will be set in ESP nexthdr. So it should skip all ipv6 nexthdrs and get the real transport protocol. Othersize, the wrong proto number will be set into ESP nexthdr. This patch is to skip all ipv6 nexthdrs by calling ipv6_skip_exthdr() in esp6_gso_encap(). Fixes: 7862b4058b9f ("esp: Add gso handlers for esp4 and esp6") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-04-15xfrm: do pskb_pull properly in __xfrm_transport_prepXin Long
For transport mode, when ipv6 nexthdr is set, the packet format might be like: ---------------------------------------------------- | | dest | | | | ESP | ESP | | IP6 hdr| opts.| ESP | TCP | Data | Trailer | ICV | ---------------------------------------------------- and in __xfrm_transport_prep(): pskb_pull(skb, skb->mac_len + sizeof(ip6hdr) + x->props.header_len); it will pull the data pointer to the wrong position, as it missed the nexthdrs/dest opts. This patch is to fix it by using: pskb_pull(skb, skb_transport_offset(skb) + x->props.header_len); as we can be sure transport_header points to ESP header at that moment. It also fixes a panic when packets with ipv6 nexthdr are sent over esp6 transport mode: [ 100.473845] kernel BUG at net/core/skbuff.c:4325! [ 100.478517] RIP: 0010:__skb_to_sgvec+0x252/0x260 [ 100.494355] Call Trace: [ 100.494829] skb_to_sgvec+0x11/0x40 [ 100.495492] esp6_output_tail+0x12e/0x550 [esp6] [ 100.496358] esp6_xmit+0x1d5/0x260 [esp6_offload] [ 100.498029] validate_xmit_xfrm+0x22f/0x2e0 [ 100.499604] __dev_queue_xmit+0x589/0x910 [ 100.502928] ip6_finish_output2+0x2a5/0x5a0 [ 100.503718] ip6_output+0x6c/0x120 [ 100.505198] xfrm_output_resume+0x4bf/0x530 [ 100.508683] xfrm6_output+0x3a/0xc0 [ 100.513446] inet6_csk_xmit+0xa1/0xf0 [ 100.517335] tcp_sendmsg+0x27/0x40 [ 100.517977] sock_sendmsg+0x3e/0x60 [ 100.518648] __sys_sendto+0xee/0x160 Fixes: c35fe4106b92 ("xfrm: Add mode handlers for IPsec on layer 2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-04-15xfrm: allow to accept packets with ipv6 NEXTHDR_HOP in xfrm_inputXin Long
For beet mode, when it's ipv6 inner address with nexthdrs set, the packet format might be: ---------------------------------------------------- | outer | | dest | | | ESP | ESP | | IP hdr | ESP | opts.| TCP | Data | Trailer | ICV | ---------------------------------------------------- The nexthdr from ESP could be NEXTHDR_HOP(0), so it should continue processing the packet when nexthdr returns 0 in xfrm_input(). Otherwise, when ipv6 nexthdr is set, the packet will be dropped. I don't see any error cases that nexthdr may return 0. So fix it by removing the check for nexthdr == 0. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-04-15mac80211: fix race in ieee80211_register_hw()Sumit Garg
A race condition leading to a kernel crash is observed during invocation of ieee80211_register_hw() on a dragonboard410c device having wcn36xx driver built as a loadable module along with a wifi manager in user-space waiting for a wifi device (wlanX) to be active. Sequence diagram for a particular kernel crash scenario: user-space ieee80211_register_hw() ieee80211_tasklet_handler() ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | | |<---phy0----wiphy_register() | |-----iwd if_add---->| | | |<---IRQ----(RX packet) | Kernel crash | | due to unallocated | | workqueue. | | | | | alloc_ordered_workqueue() | | | | | Misc wiphy init. | | | | | ieee80211_if_add() | | | | As evident from above sequence diagram, this race condition isn't specific to a particular wifi driver but rather the initialization sequence in ieee80211_register_hw() needs to be fixed. So re-order the initialization sequence and the updated sequence diagram would look like: user-space ieee80211_register_hw() ieee80211_tasklet_handler() ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | | | alloc_ordered_workqueue() | | | | | Misc wiphy init. | | | | |<---phy0----wiphy_register() | |-----iwd if_add---->| | | |<---IRQ----(RX packet) | | | | ieee80211_if_add() | | | | Cc: stable@vger.kernel.org Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Link: https://lore.kernel.org/r/1586254255-28713-1-git-send-email-sumit.garg@linaro.org [Johannes: fix rtnl imbalances] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-14net: dsa: Down cpu/dsa ports phylink will controlAndrew Lunn
DSA and CPU ports can be configured in two ways. By default, the driver should configure such ports to there maximum bandwidth. For most use cases, this is sufficient. When this default is insufficient, a phylink instance can be bound to such ports, and phylink will configure the port, e.g. based on fixed-link properties. phylink assumes the port is initially down. Given that the driver should have already configured it to its maximum speed, ask the driver to down the port before instantiating the phylink instance. Fixes: 30c4a5b0aad8 ("net: mv88e6xxx: use resolved link config in mac_link_up()") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-14rxrpc: Fix DATA Tx to disable nofrag for UDP on AF_INET6 socketDavid Howells
Fix the DATA packet transmission to disable nofrag for UDPv4 on an AF_INET6 socket as well as UDPv6 when trying to transmit fragmentably. Without this, packets filled to the normal size used by the kernel AFS client of 1412 bytes be rejected by udp_sendmsg() with EMSGSIZE immediately. The ->sk_error_report() notification hook is called, but rxrpc doesn't generate a trace for it. This is a temporary fix; a more permanent solution needs to involve changing the size of the packets being filled in accordance with the MTU, which isn't currently done in AF_RXRPC. The reason for not doing so was that, barring the last packet in an rx jumbo packet, jumbos can only be assembled out of 1412-byte packets - and the plan was to construct jumbos on the fly at transmission time. Also, there's no point turning on IPV6_MTU_DISCOVER, since IPv6 has to engage in this anyway since fragmentation is only done by the sender. We can then condense the switch-statement in rxrpc_send_data_packet(). Fixes: 75b54cb57ca3 ("rxrpc: Add IPv6 support") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-15netfilter: flowtable: Free block_cb when being deletedRoi Dayan
Free block_cb memory when asked to be deleted. Fixes: 978703f42549 ("netfilter: flowtable: Add API for registering to flow table events") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-04-14xdp: Reset prog in dev_change_xdp_fd when fd is negativeDavid Ahern
The commit mentioned in the Fixes tag reuses the local prog variable when looking up an expected_fd. The variable is not reset when fd < 0 causing a detach with the expected_fd set to actually call dev_xdp_install for the existing program. The end result is that the detach does not happen. Fixes: 92234c8f15c8 ("xdp: Support specifying expected existing program when attaching XDP") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20200412133204.43847-1-dsahern@kernel.org
2020-04-14nl80211: fix NL80211_ATTR_FTM_RESPONDER policyJohannes Berg
The nested policy here should be established using the NLA_POLICY_NESTED() macro so the length is properly filled in. Cc: stable@vger.kernel.org Fixes: 81e54d08d9d8 ("cfg80211: support FTM responder configuration/statistics") Link: https://lore.kernel.org/r/20200412004029.9d0722bb56c8.Ie690bfcc4a1a61ff8d8ca7e475d59fcaa52fb2da@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-13SUNRPC/cache: Fix unsafe traverse caused double-free in cache_purgeYihao Wu
Deleting list entry within hlist_for_each_entry_safe is not safe unless next pointer (tmp) is protected too. It's not, because once hash_lock is released, cache_clean may delete the entry that tmp points to. Then cache_purge can walk to a deleted entry and tries to double free it. Fix this bug by holding only the deleted entry's reference. Suggested-by: NeilBrown <neilb@suse.de> Signed-off-by: Yihao Wu <wuyihao@linux.alibaba.com> Reviewed-by: NeilBrown <neilb@suse.de> [ cel: removed unused variable ] Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-04-12mptcp: fix double-unlock in mptcp_pollFlorian Westphal
mptcp_connect/28740 is trying to release lock (sk_lock-AF_INET) at: [<ffffffff82c15869>] mptcp_poll+0xb9/0x550 but there are no more locks to release! Call Trace: lock_release+0x50f/0x750 release_sock+0x171/0x1b0 mptcp_poll+0xb9/0x550 sock_poll+0x157/0x470 ? get_net_ns+0xb0/0xb0 do_sys_poll+0x63c/0xdd0 Problem is that __mptcp_tcp_fallback() releases the mptcp socket lock, but after recent change it doesn't do this in all of its return paths. To fix this, remove the unlock from __mptcp_tcp_fallback() and always do the unlock in the caller. Also add a small comment as to why we have this __mptcp_needs_tcp_fallback(). Fixes: 0b4f33def7bbde ("mptcp: fix tcp fallback crash") Reported-by: syzbot+e56606435b7bfeea8cf5@syzkaller.appspotmail.com Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-11Merge tag 'kbuild-v5.7-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - raise minimum supported binutils version to 2.23 - remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports - move remaining CONFIG_AS_* tests to Kconfig from Makefile - enable -Wtautological-compare warnings to catch more issues - do not support GCC plugins for GCC <= 4.7 - fix various breakages of 'make xconfig' - include the linker version used for linking the kernel into LINUX_COMPILER, which is used for the banner, and also exposed to /proc/version - link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which allows us to remove the lib-ksyms.o workaround, and to solve the last known issue of the LLVM linker - add dummy tools in scripts/dummy-tools/ to enable all compiler tests in Kconfig, which will be useful for distro maintainers - support the single switch, LLVM=1 to use Clang and all LLVM utilities instead of GCC and Binutils. - support LLVM_IAS=1 to enable the integrated assembler, which is still experimental * tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits) kbuild: fix comment about missing include guard detection kbuild: support LLVM=1 to switch the default tools to Clang/LLVM kbuild: replace AS=clang with LLVM_IAS=1 kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory kbuild: remove -I$(srctree)/tools/include from scripts/Makefile kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h Documentation/llvm: fix the name of llvm-size kbuild: mkcompile_h: Include $LD version in /proc/version kconfig: qconf: Fix a few alignment issues kconfig: qconf: remove some old bogus TODOs kconfig: qconf: fix support for the split view mode kconfig: qconf: fix the content of the main widget kconfig: qconf: Change title for the item window kconfig: qconf: clean deprecated warnings gcc-plugins: drop support for GCC <= 4.7 kbuild: Enable -Wtautological-compare x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2 crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean' ...
2020-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2020-04-10 The following pull-request contains BPF updates for your *net* tree. We've added 13 non-merge commits during the last 7 day(s) which contain a total of 13 files changed, 137 insertions(+), 43 deletions(-). The main changes are: 1) JIT code emission fixes for riscv and arm32, from Luke Nelson and Xi Wang. 2) Disable vmlinux BTF info if GCC_PLUGIN_RANDSTRUCT is used, from Slava Bacherikov. 3) Fix oob write in AF_XDP when meta data is used, from Li RongQing. 4) Fix bpf_get_link_xdp_id() handling on single prog when flags are specified, from Andrey Ignatov. 5) Fix sk_assign() BPF helper for request sockets that can have sk_reuseport field uninitialized, from Joe Stringer. 6) Fix mprotect() test case for the BPF LSM, from KP Singh. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-09net: ipv4: devinet: Fix crash when add/del multicast IP with autojoinTaras Chornyi
When CONFIG_IP_MULTICAST is not set and multicast ip is added to the device with autojoin flag or when multicast ip is deleted kernel will crash. steps to reproduce: ip addr add 224.0.0.0/32 dev eth0 ip addr del 224.0.0.0/32 dev eth0 or ip addr add 224.0.0.0/32 dev eth0 autojoin Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088 pc : _raw_write_lock_irqsave+0x1e0/0x2ac lr : lock_sock_nested+0x1c/0x60 Call trace: _raw_write_lock_irqsave+0x1e0/0x2ac lock_sock_nested+0x1c/0x60 ip_mc_config.isra.28+0x50/0xe0 inet_rtm_deladdr+0x1a8/0x1f0 rtnetlink_rcv_msg+0x120/0x350 netlink_rcv_skb+0x58/0x120 rtnetlink_rcv+0x14/0x20 netlink_unicast+0x1b8/0x270 netlink_sendmsg+0x1a0/0x3b0 ____sys_sendmsg+0x248/0x290 ___sys_sendmsg+0x80/0xc0 __sys_sendmsg+0x68/0xc0 __arm64_sys_sendmsg+0x20/0x30 el0_svc_common.constprop.2+0x88/0x150 do_el0_svc+0x20/0x80 el0_sync_handler+0x118/0x190 el0_sync+0x140/0x180 Fixes: 93a714d6b53d ("multicast: Extend ip address command to enable multicast group join/leave on") Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-09net/rds: Fix MR reference counting problemKa-Cheong Poon
In rds_free_mr(), it calls rds_destroy_mr(mr) directly. But this defeats the purpose of reference counting and makes MR free handling impossible. It means that holding a reference does not guarantee that it is safe to access some fields. For example, In rds_cmsg_rdma_dest(), it increases the ref count, unlocks and then calls mr->r_trans->sync_mr(). But if rds_free_mr() (and rds_destroy_mr()) is called in between (there is no lock preventing this to happen), r_trans_private is set to NULL, causing a panic. Similar issue is in rds_rdma_unuse(). Reported-by: zerons <sironhide0null@gmail.com> Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-09net/rds: Replace struct rds_mr's r_refcount with struct krefKa-Cheong Poon
And removed rds_mr_put(). Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-09net-sysfs: remove redundant assignment to variable retColin Ian King
The variable ret is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-09net: qrtr: send msgs from local of same id as broadcastWang Wenhu
If the local node id(qrtr_local_nid) is not modified after its initialization, it equals to the broadcast node id(QRTR_NODE_BCAST). So the messages from local node should not be taken as broadcast and keep the process going to send them out anyway. The definitions are as follow: static unsigned int qrtr_local_nid = NUMA_NO_NODE; Fixes: fdf5fd397566 ("net: qrtr: Broadcast messages only from control port") Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-08Merge tag 'ceph-for-5.7-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph updates from Ilya Dryomov: "The main items are: - support for asynchronous create and unlink (Jeff Layton). Creates and unlinks are satisfied locally, without waiting for a reply from the MDS, provided the client has been granted appropriate caps (new in v15.y.z ("Octopus") release). This can be a big help for metadata heavy workloads such as tar and rsync. Opt-in with the new nowsync mount option. - multiple blk-mq queues for rbd (Hannes Reinecke and myself). When the driver was converted to blk-mq, we settled on a single blk-mq queue because of a global lock in libceph and some other technical debt. These have since been addressed, so allocate a queue per CPU to enhance parallelism. - don't hold onto caps that aren't actually needed (Zheng Yan). This has been our long-standing behavior, but it causes issues with some active/standby applications (synchronous I/O, stalls if the standby goes down, etc). - .snap directory timestamps consistent with ceph-fuse (Luis Henriques)" * tag 'ceph-for-5.7-rc1' of git://github.com/ceph/ceph-client: (49 commits) ceph: fix snapshot directory timestamps ceph: wait for async creating inode before requesting new max size ceph: don't skip updating wanted caps when cap is stale ceph: request new max size only when there is auth cap ceph: cleanup return error of try_get_cap_refs() ceph: return ceph_mdsc_do_request() errors from __get_parent() ceph: check all mds' caps after page writeback ceph: update i_requested_max_size only when sending cap msg to auth mds ceph: simplify calling of ceph_get_fmode() ceph: remove delay check logic from ceph_check_caps() ceph: consider inode's last read/write when calculating wanted caps ceph: always renew caps if mds_wanted is insufficient ceph: update dentry lease for async create ceph: attempt to do async create when possible ceph: cache layout in parent dir on first sync create ceph: add new MDS req field to hold delegated inode number ceph: decode interval_sets for delegated inos ceph: make ceph_fill_inode non-static ceph: perform asynchronous unlink if we have sufficient caps ceph: don't take refs to want mask unless we have all bits ...
2020-04-09bpf: Fix use of sk->sk_reuseport from sk_assignJoe Stringer
In testing, we found that for request sockets the sk->sk_reuseport field may yet be uninitialized, which caused bpf_sk_assign() to randomly succeed or return -ESOCKTNOSUPPORT when handling the forward ACK in a three-way handshake. Fix it by only applying the reuseport check for full sockets. Fixes: cf7fbe660f2d ("bpf: Add socket assign support") Signed-off-by: Joe Stringer <joe@wand.net.nz> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200408033540.10339-1-joe@wand.net.nz
2020-04-08net/tls: fix const assignment warningArnd Bergmann
Building with some experimental patches, I came across a warning in the tls code: include/linux/compiler.h:215:30: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 215 | *(volatile typeof(x) *)&(x) = (val); \ | ^ net/tls/tls_main.c:650:4: note: in expansion of macro 'smp_store_release' 650 | smp_store_release(&saved_tcpv4_prot, prot); This appears to be a legitimate warning about assigning a const pointer into the non-const 'saved_tcpv4_prot' global. Annotate both the ipv4 and ipv6 pointers 'const' to make the code internally consistent. Fixes: 5bb4c45d466c ("net/tls: Read sk_prot once when building tls proto ops") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-08l2tp: Allow management of tunnels and session in user namespaceMichael Weiß
Creation and management of L2TPv3 tunnels and session through netlink requires CAP_NET_ADMIN. However, a process with CAP_NET_ADMIN in a non-initial user namespace gets an EPERM due to the use of the genetlink GENL_ADMIN_PERM flag. Thus, management of L2TP VPNs inside an unprivileged container won't work. We replaced the GENL_ADMIN_PERM by the GENL_UNS_ADMIN_PERM flag similar to other network modules which also had this problem, e.g., openvswitch (commit 4a92602aa1cd "openvswitch: allow management from inside user namespaces") and nl80211 (commit 5617c6cd6f844 "nl80211: Allow privileged operations from user namespaces"). I tested this in the container runtime trustm3 (trustm3.github.io) and was able to create l2tp tunnels and sessions in unpriviliged (user namespaced) containers using a private network namespace. For other runtimes such as docker or lxc this should work, too. Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-09x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2Jason A. Donenfeld
Now that the kernel specifies binutils 2.23 as the minimum version, we can remove ifdefs for AVX2 and ADX throughout. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-09x86: probe assembler capabilities via kconfig instead of makefileJason A. Donenfeld
Doing this probing inside of the Makefiles means we have a maze of ifdefs inside the source code and child Makefiles that need to make proper decisions on this too. Instead, we do it at Kconfig time, like many other compiler and assembler options, which allows us to set up the dependencies normally for full compilation units. In the process, the ADX test changes to use %eax instead of %r10 so that it's valid in both 32-bit and 64-bit mode. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-07hsr: check protocol version in hsr_newlink()Taehee Yoo
In the current hsr code, only 0 and 1 protocol versions are valid. But current hsr code doesn't check the version, which is received by userspace. Test commands: ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 version 4 In the test commands, version 4 is invalid. So, the command should be failed. After this patch, following error will occur. "Error: hsr: Only versions 0..1 are supported." Fixes: ee1c27977284 ("net/hsr: Added support for HSR v1") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-07net: sched: Fix setting last executed chain on skb extensionPaul Blakey
After driver sets the missed chain on the tc skb extension it is consumed (deleted) by tc_classify_ingress and tc jumps to that chain. If tc now misses on this chain (either no match, or no goto action), then last executed chain remains 0, and the skb extension is not re-added, and the next datapath (ovs) will start from 0. Fix that by setting last executed chain to the chain read from the skb extension, so if there is a miss, we set it back. Fixes: af699626ee26 ("net: sched: Support specifying a starting chain via tc skb ext") Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-07net: revert default NAPI poll timeout to 2 jiffiesKonstantin Khlebnikov
For HZ < 1000 timeout 2000us rounds up to 1 jiffy but expires randomly because next timer interrupt could come shortly after starting softirq. For commonly used CONFIG_HZ=1000 nothing changes. Fixes: 7acf8a1e8a28 ("Replace 2 jiffies with sysctl netdev_budget_usecs to enable softirq tuning") Reported-by: Dmitry Yakunin <zeil@yandex-team.ru> Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-07net: icmp6: do not select saddr from iif when route has prefsrc setTim Stallard
Since commit fac6fce9bdb5 ("net: icmp6: provide input address for traceroute6") ICMPv6 errors have source addresses from the ingress interface. However, this overrides when source address selection is influenced by setting preferred source addresses on routes. This can result in ICMP errors being lost to upstream BCP38 filters when the wrong source addresses are used, breaking path MTU discovery and traceroute. This patch sets the modified source address selection to only take place when the route used has no prefsrc set. It can be tested with: ip link add v1 type veth peer name v2 ip netns add test ip netns exec test ip link set lo up ip link set v2 netns test ip link set v1 up ip netns exec test ip link set v2 up ip addr add 2001:db8::1/64 dev v1 nodad ip addr add 2001:db8::3 dev v1 nodad ip netns exec test ip addr add 2001:db8::2/64 dev v2 nodad ip netns exec test ip route add unreachable 2001:db8:1::1 ip netns exec test ip addr add 2001:db8:100::1 dev lo ip netns exec test ip route add 2001:db8::1 dev v2 src 2001:db8:100::1 ip route add 2001:db8:1000::1 via 2001:db8::2 traceroute6 -s 2001:db8::1 2001:db8:1000::1 traceroute6 -s 2001:db8::3 2001:db8:1000::1 ip netns delete test Output before: $ traceroute6 -s 2001:db8::1 2001:db8:1000::1 traceroute to 2001:db8:1000::1 (2001:db8:1000::1), 30 hops max, 80 byte packets 1 2001:db8::2 (2001:db8::2) 0.843 ms !N 0.396 ms !N 0.257 ms !N $ traceroute6 -s 2001:db8::3 2001:db8:1000::1 traceroute to 2001:db8:1000::1 (2001:db8:1000::1), 30 hops max, 80 byte packets 1 2001:db8::2 (2001:db8::2) 0.772 ms !N 0.257 ms !N 0.357 ms !N After: $ traceroute6 -s 2001:db8::1 2001:db8:1000::1 traceroute to 2001:db8:1000::1 (2001:db8:1000::1), 30 hops max, 80 byte packets 1 2001:db8:100::1 (2001:db8:100::1) 8.885 ms !N 0.310 ms !N 0.174 ms !N $ traceroute6 -s 2001:db8::3 2001:db8:1000::1 traceroute to 2001:db8:1000::1 (2001:db8:1000::1), 30 hops max, 80 byte packets 1 2001:db8::2 (2001:db8::2) 1.403 ms !N 0.205 ms !N 0.313 ms !N Fixes: fac6fce9bdb5 ("net: icmp6: provide input address for traceroute6") Signed-off-by: Tim Stallard <code@timstallard.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net, they are: 1) Fix spurious overlap condition in the rbtree tree, from Stefano Brivio. 2) Fix possible uninitialized pointer dereference in nft_lookup. 3) IDLETIMER v1 target matches the Android layout, from Maciej Zenczykowski. 4) Dangling pointer in nf_tables_set_alloc_name, from Eric Dumazet. 5) Fix RCU warning splat in ipset find_set_type(), from Amol Grover. 6) Report EOPNOTSUPP on unsupported set flags and object types in sets. 7) Add NFT_SET_CONCAT flag to provide consistent error reporting when users defines set with ranges in concatenations in old kernels. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-07Merge tag 'nfs-for-5.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client updates from Trond Myklebust: "Highlights include: Stable fixes: - Fix a page leak in nfs_destroy_unlinked_subrequests() - Fix use-after-free issues in nfs_pageio_add_request() - Fix new mount code constant_table array definitions - finish_automount() requires us to hold 2 refs to the mount record Features: - Improve the accuracy of telldir/seekdir by using 64-bit cookies when possible. - Allow one RDMA active connection and several zombie connections to prevent blocking if the remote server is unresponsive. - Limit the size of the NFS access cache by default - Reduce the number of references to credentials that are taken by NFS - pNFS files and flexfiles drivers now support per-layout segment COMMIT lists. - Enable partial-file layout segments in the pNFS/flexfiles driver. - Add support for CB_RECALL_ANY to the pNFS flexfiles layout type - pNFS/flexfiles Report NFS4ERR_DELAY and NFS4ERR_GRACE errors from the DS using the layouterror mechanism. Bugfixes and cleanups: - SUNRPC: Fix krb5p regressions - Don't specify NFS version in "UDP not supported" error - nfsroot: set tcp as the default transport protocol - pnfs: Return valid stateids in nfs_layout_find_inode_by_stateid() - alloc_nfs_open_context() must use the file cred when available - Fix locking when dereferencing the delegation cred - Fix memory leaks in O_DIRECT when nfs_get_lock_context() fails - Various clean ups of the NFS O_DIRECT commit code - Clean up RDMA connect/disconnect - Replace zero-length arrays with C99-style flexible arrays" * tag 'nfs-for-5.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (86 commits) NFS: Clean up process of marking inode stale. SUNRPC: Don't start a timer on an already queued rpc task NFS/pnfs: Reference the layout cred in pnfs_prepare_layoutreturn() NFS/pnfs: Fix dereference of layout cred in pnfs_layoutcommit_inode() NFS: Beware when dereferencing the delegation cred NFS: Add a module parameter to set nfs_mountpoint_expiry_timeout NFS: finish_automount() requires us to hold 2 refs to the mount record NFS: Fix a few constant_table array definitions NFS: Try to join page groups before an O_DIRECT retransmission NFS: Refactor nfs_lock_and_join_requests() NFS: Reverse the submission order of requests in __nfs_pageio_add_request() NFS: Clean up nfs_lock_and_join_requests() NFS: Remove the redundant function nfs_pgio_has_mirroring() NFS: Fix memory leaks in nfs_pageio_stop_mirroring() NFS: Fix a request reference leak in nfs_direct_write_clear_reqs() NFS: Fix use-after-free issues in nfs_pageio_add_request() NFS: Fix races nfs_page_group_destroy() vs nfs_destroy_unlinked_subrequests() NFS: Fix a page leak in nfs_destroy_unlinked_subrequests() NFS: Remove unused FLUSH_SYNC support in nfs_initiate_pgio() pNFS/flexfiles: Specify the layout segment range in LAYOUTGET ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 04:52:42 +0000