summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2025-03-13net: ipv6: fix missing dst ref drop in ila lwtunnelJustin Iurman
[ Upstream commit 5da15a9c11c1c47ef573e6805b60a7d8a1687a2a ] Add missing skb_dst_drop() to drop reference to the old dst before adding the new dst to the skb. Fixes: 79ff2fc31e0f ("ila: Cache a route to translated address") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Link: https://patch.msgid.link/20250305081655.19032-1-justin.iurman@uliege.be Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13net: ipv6: fix dst ref loop in ila lwtunnelJustin Iurman
[ Upstream commit 0e7633d7b95b67f1758aea19f8e85621c5f506a3 ] This patch follows commit 92191dd10730 ("net: ipv6: fix dst ref loops in rpl, seg6 and ioam6 lwtunnels") and, on a second thought, the same patch is also needed for ila (even though the config that triggered the issue was pathological, but still, we don't want that to happen). Fixes: 79ff2fc31e0f ("ila: Cache a route to translated address") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Link: https://patch.msgid.link/20250304181039.35951-1-justin.iurman@uliege.be Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13net-timestamp: support TCP GSO case for a few missing flagsJason Xing
[ Upstream commit 3c9231ea6497dfc50ac0ef69fff484da27d0df66 ] When I read through the TSO codes, I found out that we probably miss initializing the tx_flags of last seg when TSO is turned off, which means at the following points no more timestamp (for this last one) will be generated. There are three flags to be handled in this patch: 1. SKBTX_HW_TSTAMP 2. SKBTX_BPF 3. SKBTX_SCHED_TSTAMP Note that SKBTX_BPF[1] was added in 6.14.0-rc2 by commit 6b98ec7e882af ("bpf: Add BPF_SOCK_OPS_TSTAMP_SCHED_CB callback") and only belongs to net-next branch material for now. The common issue of the above three flags can be fixed by this single patch. This patch initializes the tx_flags to SKBTX_ANY_TSTAMP like what the UDP GSO does to make the newly segmented last skb inherit the tx_flags so that requested timestamp will be generated in each certain layer, or else that last one has zero value of tx_flags which leads to no timestamp at all. Fixes: 4ed2d765dfacc ("net-timestamp: TCP timestamping") Signed-off-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13vlan: enforce underlying device typeOscar Maes
[ Upstream commit b33a534610067ade2bdaf2052900aaad99701353 ] Currently, VLAN devices can be created on top of non-ethernet devices. Besides the fact that it doesn't make much sense, this also causes a bug which leaks the address of a kernel function to usermode. When creating a VLAN device, we initialize GARP (garp_init_applicant) and MRP (mrp_init_applicant) for the underlying device. As part of the initialization process, we add the multicast address of each applicant to the underlying device, by calling dev_mc_add. __dev_mc_add uses dev->addr_len to determine the length of the new multicast address. This causes an out-of-bounds read if dev->addr_len is greater than 6, since the multicast addresses provided by GARP and MRP are only 6 bytes long. This behaviour can be reproduced using the following commands: ip tunnel add gretest mode ip6gre local ::1 remote ::2 dev lo ip l set up dev gretest ip link add link gretest name vlantest type vlan id 100 Then, the following command will display the address of garp_pdu_rcv: ip maddr show | grep 01:80:c2:00:00:21 Fix the bug by enforcing the type of the underlying device during VLAN device initialization. Fixes: 22bedad3ce11 ("net: convert multicast list to list_head") Reported-by: syzbot+91161fe81857b396c8a0@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/000000000000ca9a81061a01ec20@google.com/ Signed-off-by: Oscar Maes <oscmaes92@gmail.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20250303155619.8918-1-oscmaes92@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13llc: do not use skb_get() before dev_queue_xmit()Eric Dumazet
[ Upstream commit 64e6a754d33d31aa844b3ee66fb93ac84ca1565e ] syzbot is able to crash hosts [1], using llc and devices not supporting IFF_TX_SKB_SHARING. In this case, e1000 driver calls eth_skb_pad(), while the skb is shared. Simply replace skb_get() by skb_clone() in net/llc/llc_s_ac.c Note that e1000 driver might have an issue with pktgen, because it does not clear IFF_TX_SKB_SHARING, this is an orthogonal change. We need to audit other skb_get() uses in net/llc. [1] kernel BUG at net/core/skbuff.c:2178 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 UID: 0 PID: 16371 Comm: syz.2.2764 Not tainted 6.14.0-rc4-syzkaller-00052-gac9c34d1e45a #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:pskb_expand_head+0x6ce/0x1240 net/core/skbuff.c:2178 Call Trace: <TASK> __skb_pad+0x18a/0x610 net/core/skbuff.c:2466 __skb_put_padto include/linux/skbuff.h:3843 [inline] skb_put_padto include/linux/skbuff.h:3862 [inline] eth_skb_pad include/linux/etherdevice.h:656 [inline] e1000_xmit_frame+0x2d99/0x5800 drivers/net/ethernet/intel/e1000/e1000_main.c:3128 __netdev_start_xmit include/linux/netdevice.h:5151 [inline] netdev_start_xmit include/linux/netdevice.h:5160 [inline] xmit_one net/core/dev.c:3806 [inline] dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3822 sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343 __dev_xmit_skb net/core/dev.c:4045 [inline] __dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4621 dev_queue_xmit include/linux/netdevice.h:3313 [inline] llc_sap_action_send_test_c+0x268/0x320 net/llc/llc_s_ac.c:144 llc_exec_sap_trans_actions net/llc/llc_sap.c:153 [inline] llc_sap_next_state net/llc/llc_sap.c:182 [inline] llc_sap_state_process+0x239/0x510 net/llc/llc_sap.c:209 llc_ui_sendmsg+0xd0d/0x14e0 net/llc/af_llc.c:993 sock_sendmsg_nosec net/socket.c:718 [inline] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+da65c993ae113742a25f@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/67c020c0.050a0220.222324.0011.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13net: gso: fix ownership in __udp_gso_segmentAntoine Tenart
[ Upstream commit ee01b2f2d7d0010787c2343463965bbc283a497f ] In __udp_gso_segment the skb destructor is removed before segmenting the skb but the socket reference is kept as-is. This is an issue if the original skb is later orphaned as we can hit the following bug: kernel BUG at ./include/linux/skbuff.h:3312! (skb_orphan) RIP: 0010:ip_rcv_core+0x8b2/0xca0 Call Trace: ip_rcv+0xab/0x6e0 __netif_receive_skb_one_core+0x168/0x1b0 process_backlog+0x384/0x1100 __napi_poll.constprop.0+0xa1/0x370 net_rx_action+0x925/0xe50 The above can happen following a sequence of events when using OpenVSwitch, when an OVS_ACTION_ATTR_USERSPACE action precedes an OVS_ACTION_ATTR_OUTPUT action: 1. OVS_ACTION_ATTR_USERSPACE is handled (in do_execute_actions): the skb goes through queue_gso_packets and then __udp_gso_segment, where its destructor is removed. 2. The segments' data are copied and sent to userspace. 3. OVS_ACTION_ATTR_OUTPUT is handled (in do_execute_actions) and the same original skb is sent to its path. 4. If it later hits skb_orphan, we hit the bug. Fix this by also removing the reference to the socket in __udp_gso_segment. Fixes: ad405857b174 ("udp: better wmem accounting on gso") Signed-off-by: Antoine Tenart <atenart@kernel.org> Link: https://patch.msgid.link/20250226171352.258045-1-atenart@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13wifi: nl80211: reject cooked mode if it is set along with other flagsVitaliy Shevtsov
commit 49f27f29446a5bfe633dd2cc0cfebd48a1a5e77f upstream. It is possible to set both MONITOR_FLAG_COOK_FRAMES and MONITOR_FLAG_ACTIVE flags simultaneously on the same monitor interface from the userspace. This causes a sub-interface to be created with no IEEE80211_SDATA_IN_DRIVER bit set because the monitor interface is in the cooked state and it takes precedence over all other states. When the interface is then being deleted the kernel calls WARN_ONCE() from check_sdata_in_driver() because of missing that bit. Fix this by rejecting MONITOR_FLAG_COOK_FRAMES if it is set along with other flags. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 66f7ac50ed7c ("nl80211: Add monitor interface configuration flags") Cc: stable@vger.kernel.org Reported-by: syzbot+2e5c1e55b9e5c28a3da7@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=2e5c1e55b9e5c28a3da7 Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru> Link: https://patch.msgid.link/20250131152657.5606-1-v.shevtsov@mt-integration.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13wifi: cfg80211: regulatory: improve invalid hints checkingNikita Zhandarovich
commit 59b348be7597c4a9903cb003c69e37df20c04a30 upstream. Syzbot keeps reporting an issue [1] that occurs when erroneous symbols sent from userspace get through into user_alpha2[] via regulatory_hint_user() call. Such invalid regulatory hints should be rejected. While a sanity check from commit 47caf685a685 ("cfg80211: regulatory: reject invalid hints") looks to be enough to deter these very cases, there is a way to get around it due to 2 reasons. 1) The way isalpha() works, symbols other than latin lower and upper letters may be used to determine a country/domain. For instance, greek letters will also be considered upper/lower letters and for such characters isalpha() will return true as well. However, ISO-3166-1 alpha2 codes should only hold latin characters. 2) While processing a user regulatory request, between reg_process_hint_user() and regulatory_hint_user() there happens to be a call to queue_regulatory_request() which modifies letters in request->alpha2[] with toupper(). This works fine for latin symbols, less so for weird letter characters from the second part of _ctype[]. Syzbot triggers a warning in is_user_regdom_saved() by first sending over an unexpected non-latin letter that gets malformed by toupper() into a character that ends up failing isalpha() check. Prevent this by enhancing is_an_alpha2() to ensure that incoming symbols are latin letters and nothing else. [1] Syzbot report: ------------[ cut here ]------------ Unexpected user alpha2: A� WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 is_user_regdom_saved net/wireless/reg.c:440 [inline] WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_alpha2 net/wireless/reg.c:3424 [inline] WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516 Modules linked in: CPU: 1 UID: 0 PID: 964 Comm: kworker/1:2 Not tainted 6.12.0-rc5-syzkaller-00044-gc1e939a21eb1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: events_power_efficient crda_timeout_work RIP: 0010:is_user_regdom_saved net/wireless/reg.c:440 [inline] RIP: 0010:restore_alpha2 net/wireless/reg.c:3424 [inline] RIP: 0010:restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516 ... Call Trace: <TASK> crda_timeout_work+0x27/0x50 net/wireless/reg.c:542 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa65/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f2/0x390 kernel/kthread.c:389 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Reported-by: syzbot+e10709ac3c44f3d4e800@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=e10709ac3c44f3d4e800 Fixes: 09d989d179d0 ("cfg80211: add regulatory hint disconnect support") Cc: stable@kernel.org Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Link: https://patch.msgid.link/20250228134659.1577656-1-n.zhandarovich@fintech.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13drop_monitor: fix incorrect initialization orderGavrilov Ilia
[ Upstream commit 07b598c0e6f06a0f254c88dafb4ad50f8a8c6eea ] Syzkaller reports the following bug: BUG: spinlock bad magic on CPU#1, syz-executor.0/7995 lock: 0xffff88805303f3e0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 1 PID: 7995 Comm: syz-executor.0 Tainted: G E 5.10.209+ #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x119/0x179 lib/dump_stack.c:118 debug_spin_lock_before kernel/locking/spinlock_debug.c:83 [inline] do_raw_spin_lock+0x1f6/0x270 kernel/locking/spinlock_debug.c:112 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:117 [inline] _raw_spin_lock_irqsave+0x50/0x70 kernel/locking/spinlock.c:159 reset_per_cpu_data+0xe6/0x240 [drop_monitor] net_dm_cmd_trace+0x43d/0x17a0 [drop_monitor] genl_family_rcv_msg_doit+0x22f/0x330 net/netlink/genetlink.c:739 genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] genl_rcv_msg+0x341/0x5a0 net/netlink/genetlink.c:800 netlink_rcv_skb+0x14d/0x440 net/netlink/af_netlink.c:2497 genl_rcv+0x29/0x40 net/netlink/genetlink.c:811 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x54b/0x800 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x914/0xe00 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec net/socket.c:651 [inline] __sock_sendmsg+0x157/0x190 net/socket.c:663 ____sys_sendmsg+0x712/0x870 net/socket.c:2378 ___sys_sendmsg+0xf8/0x170 net/socket.c:2432 __sys_sendmsg+0xea/0x1b0 net/socket.c:2461 do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x62/0xc7 RIP: 0033:0x7f3f9815aee9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f3f972bf0c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f3f9826d050 RCX: 00007f3f9815aee9 RDX: 0000000020000000 RSI: 0000000020001300 RDI: 0000000000000007 RBP: 00007f3f981b63bd R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000006e R14: 00007f3f9826d050 R15: 00007ffe01ee6768 If drop_monitor is built as a kernel module, syzkaller may have time to send a netlink NET_DM_CMD_START message during the module loading. This will call the net_dm_monitor_start() function that uses a spinlock that has not yet been initialized. To fix this, let's place resource initialization above the registration of a generic netlink family. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 9a8afc8d3962 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol") Cc: stable@vger.kernel.org Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250213152054.2785669-1-Ilia.Gavrilov@infotecs.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13pfifo_tail_enqueue: Drop new packet when sch->limit == 0Quang Le
commit 647cef20e649c576dff271e018d5d15d998b629d upstream. Expected behaviour: In case we reach scheduler's limit, pfifo_tail_enqueue() will drop a packet in scheduler's queue and decrease scheduler's qlen by one. Then, pfifo_tail_enqueue() enqueue new packet and increase scheduler's qlen by one. Finally, pfifo_tail_enqueue() return `NET_XMIT_CN` status code. Weird behaviour: In case we set `sch->limit == 0` and trigger pfifo_tail_enqueue() on a scheduler that has no packet, the 'drop a packet' step will do nothing. This means the scheduler's qlen still has value equal 0. Then, we continue to enqueue new packet and increase scheduler's qlen by one. In summary, we can leverage pfifo_tail_enqueue() to increase qlen by one and return `NET_XMIT_CN` status code. The problem is: Let's say we have two qdiscs: Qdisc_A and Qdisc_B. - Qdisc_A's type must have '->graft()' function to create parent/child relationship. Let's say Qdisc_A's type is `hfsc`. Enqueue packet to this qdisc will trigger `hfsc_enqueue`. - Qdisc_B's type is pfifo_head_drop. Enqueue packet to this qdisc will trigger `pfifo_tail_enqueue`. - Qdisc_B is configured to have `sch->limit == 0`. - Qdisc_A is configured to route the enqueued's packet to Qdisc_B. Enqueue packet through Qdisc_A will lead to: - hfsc_enqueue(Qdisc_A) -> pfifo_tail_enqueue(Qdisc_B) - Qdisc_B->q.qlen += 1 - pfifo_tail_enqueue() return `NET_XMIT_CN` - hfsc_enqueue() check for `NET_XMIT_SUCCESS` and see `NET_XMIT_CN` => hfsc_enqueue() don't increase qlen of Qdisc_A. The whole process lead to a situation where Qdisc_A->q.qlen == 0 and Qdisc_B->q.qlen == 1. Replace 'hfsc' with other type (for example: 'drr') still lead to the same problem. This violate the design where parent's qlen should equal to the sum of its childrens'qlen. Bug impact: This issue can be used for user->kernel privilege escalation when it is reachable. Fixes: 57dbb2d83d10 ("sched: add head drop fifo queue") Reported-by: Quang Le <quanglex97@gmail.com> Signed-off-by: Quang Le <quanglex97@gmail.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Link: https://patch.msgid.link/20250204005841.223511-2-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13ipvs: Always clear ipvs_property flag in skb_scrub_packet()Philo Lu
[ Upstream commit de2c211868b9424f9aa9b3432c4430825bafb41b ] We found an issue when using bpf_redirect with ipvs NAT mode after commit ff70202b2d1a ("dev_forward_skb: do not scrub skb mark within the same name space"). Particularly, we use bpf_redirect to return the skb directly back to the netif it comes from, i.e., xnet is false in skb_scrub_packet(), and then ipvs_property is preserved and SNAT is skipped in the rx path. ipvs_property has been already cleared when netns is changed in commit 2b5ec1a5f973 ("netfilter/ipvs: clear ipvs_property flag when SKB net namespace changed"). This patch just clears it in spite of netns. Fixes: 2b5ec1a5f973 ("netfilter/ipvs: clear ipvs_property flag when SKB net namespace changed") Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Acked-by: Julian Anastasov <ja@ssi.bg> Link: https://patch.msgid.link/20250222033518.126087-1-lulie@linux.alibaba.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13sunrpc: suppress warnings for unused procfs functionsArnd Bergmann
[ Upstream commit 1f7a4f98c11fbeb18ed21f3b3a497e90a50ad2e0 ] There is a warning about unused variables when building with W=1 and no procfs: net/sunrpc/cache.c:1660:30: error: 'cache_flush_proc_ops' defined but not used [-Werror=unused-const-variable=] 1660 | static const struct proc_ops cache_flush_proc_ops = { | ^~~~~~~~~~~~~~~~~~~~ net/sunrpc/cache.c:1622:30: error: 'content_proc_ops' defined but not used [-Werror=unused-const-variable=] 1622 | static const struct proc_ops content_proc_ops = { | ^~~~~~~~~~~~~~~~ net/sunrpc/cache.c:1598:30: error: 'cache_channel_proc_ops' defined but not used [-Werror=unused-const-variable=] 1598 | static const struct proc_ops cache_channel_proc_ops = { | ^~~~~~~~~~~~~~~~~~~~~~ These are used inside of an #ifdef, so replacing that with an IS_ENABLED() check lets the compiler see how they are used while still dropping them during dead code elimination. Fixes: dbf847ecb631 ("knfsd: allow cache_register to return error on failure") Reviewed-by: Jeff Layton <jlayton@kernel.org> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13batman-adv: Drop unmanaged ELP metric workerSven Eckelmann
commit 8c8ecc98f5c65947b0070a24bac11e12e47cc65d upstream. The ELP worker needs to calculate new metric values for all neighbors "reachable" over an interface. Some of the used metric sources require locks which might need to sleep. This sleep is incompatible with the RCU list iterator used for the recorded neighbors. The initial approach to work around of this problem was to queue another work item per neighbor and then run this in a new context. Even when this solved the RCU vs might_sleep() conflict, it has a major problems: Nothing was stopping the work item in case it is not needed anymore - for example because one of the related interfaces was removed or the batman-adv module was unloaded - resulting in potential invalid memory accesses. Directly canceling the metric worker also has various problems: * cancel_work_sync for a to-be-deactivated interface is called with rtnl_lock held. But the code in the ELP metric worker also tries to use rtnl_lock() - which will never return in this case. This also means that cancel_work_sync would never return because it is waiting for the worker to finish. * iterating over the neighbor list for the to-be-deactivated interface is currently done using the RCU specific methods. Which means that it is possible to miss items when iterating over it without the associated spinlock - a behaviour which is acceptable for a periodic metric check but not for a cleanup routine (which must "stop" all still running workers) The better approch is to get rid of the per interface neighbor metric worker and handle everything in the interface worker. The original problems are solved by: * creating a list of neighbors which require new metric information inside the RCU protected context, gathering the metric according to the new list outside the RCU protected context * only use rcu_trylock inside metric gathering code to avoid a deadlock when the cancel_delayed_work_sync is called in the interface removal code (which is called with the rtnl_lock held) Cc: stable@vger.kernel.org Fixes: c833484e5f38 ("batman-adv: ELP - compute the metric based on the estimated throughput") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13batman-adv: Ignore neighbor throughput metrics in error caseSven Eckelmann
commit e7e34ffc976aaae4f465b7898303241b81ceefc3 upstream. If a temporary error happened in the evaluation of the neighbor throughput information, then the invalid throughput result should not be stored in the throughtput EWMA. Cc: stable@vger.kernel.org Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13flow_dissector: Fix port range key handling in BPF conversionCong Wang
[ Upstream commit 69ab34f705fbfabcace64b5d53bb7a4450fac875 ] Fix how port range keys are handled in __skb_flow_bpf_to_target() by: - Separating PORTS and PORTS_RANGE key handling - Using correct key_ports_range structure for range keys - Properly initializing both key types independently This ensures port range information is correctly stored in its dedicated structure rather than incorrectly using the regular ports key structure. Fixes: 59fb9b62fb6c ("flow_dissector: Fix to use new variables for port ranges in bpf hook") Reported-by: Qiang Zhang <dtzq01@gmail.com> Closes: https://lore.kernel.org/netdev/CAPx+-5uvFxkhkz4=j_Xuwkezjn9U6kzKTD5jz4tZ9msSJ0fOJA@mail.gmail.com/ Cc: Yoshiki Komachi <komachi.yoshiki@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Link: https://patch.msgid.link/20250218043210.732959-4-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13flow_dissector: Fix handling of mixed port and port-range keysCong Wang
[ Upstream commit 3e5796862c692ea608d96f0a1437f9290f44953a ] This patch fixes a bug in TC flower filter where rules combining a specific destination port with a source port range weren't working correctly. The specific case was when users tried to configure rules like: tc filter add dev ens38 ingress protocol ip flower ip_proto udp \ dst_port 5000 src_port 2000-3000 action drop The root cause was in the flow dissector code. While both FLOW_DISSECTOR_KEY_PORTS and FLOW_DISSECTOR_KEY_PORTS_RANGE flags were being set correctly in the classifier, the __skb_flow_dissect_ports() function was only populating one of them: whichever came first in the enum check. This meant that when the code needed both a specific port and a port range, one of them would be left as 0, causing the filter to not match packets as expected. Fix it by removing the either/or logic and instead checking and populating both key types independently when they're in use. Fixes: 8ffb055beae5 ("cls_flower: Fix the behavior using port ranges with hw-offload") Reported-by: Qiang Zhang <dtzq01@gmail.com> Closes: https://lore.kernel.org/netdev/CAPx+-5uvFxkhkz4=j_Xuwkezjn9U6kzKTD5jz4tZ9msSJ0fOJA@mail.gmail.com/ Cc: Yoshiki Komachi <komachi.yoshiki@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250218043210.732959-2-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13net: extract port range fields from fl_flow_keyMaksym Glubokiy
[ Upstream commit 83d85bb069152b790caad905fa53e6d50cd3734d ] So it can be used for port range filter offloading. Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 3e5796862c69 ("flow_dissector: Fix handling of mixed port and port-range keys") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13vlan: move dev_put into vlan_dev_uninitXin Long
commit d6ff94afd90b0ce8d1715f8ef77d4347d7a7f2c0 upstream. Shuang Li reported an QinQ issue by simply doing: # ip link add dummy0 type dummy # ip link add link dummy0 name dummy0.1 type vlan id 1 # ip link add link dummy0.1 name dummy0.1.2 type vlan id 2 # rmmod 8021q unregister_netdevice: waiting for dummy0.1 to become free. Usage count = 1 When rmmods 8021q, all vlan devs are deleted from their real_dev's vlan grp and added into list_kill by unregister_vlan_dev(). dummy0.1 is unregistered before dummy0.1.2, as it's using for_each_netdev() in __rtnl_kill_links(). When unregisters dummy0.1, dummy0.1.2 is not unregistered in the event of NETDEV_UNREGISTER, as it's been deleted from dummy0.1's vlan grp. However, due to dummy0.1.2 still holding dummy0.1, dummy0.1 will keep waiting in netdev_wait_allrefs(), while dummy0.1.2 will never get unregistered and release dummy0.1, as it delays dev_put until calling dev->priv_destructor, vlan_dev_free(). This issue was introduced by Commit 563bcbae3ba2 ("net: vlan: fix a UAF in vlan_dev_real_dev()"), and this patch is to fix it by moving dev_put() into vlan_dev_uninit(), which is called after NETDEV_UNREGISTER event but before netdev_wait_allrefs(). Fixes: 563bcbae3ba2 ("net: vlan: fix a UAF in vlan_dev_real_dev()") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Signed-off-by: Ivan Delalande <colona@arista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13vlan: introduce vlan_dev_free_egress_priorityXin Long
commit 37aa50c539bcbcc01767e515bd170787fcfc0f33 upstream. This patch is to introduce vlan_dev_free_egress_priority() to free egress priority for vlan dev, and keep vlan_dev_uninit() static as .ndo_uninit. It makes the code more clear and safer when adding new code in vlan_dev_uninit() in the future. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Signed-off-by: Ivan Delalande <colona@arista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13ndisc: extend RCU protection in ndisc_send_skb()Eric Dumazet
[ Upstream commit ed6ae1f325d3c43966ec1b62ac1459e2b8e45640 ] ndisc_send_skb() can be called without RTNL or RCU held. Acquire rcu_read_lock() earlier, so that we can use dev_net_rcu() and avoid a potential UAF. Fixes: 1762f7e88eb3 ("[NETNS][IPV6] ndisc - make socket control per namespace") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250207135841.1948589-8-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13openvswitch: use RCU protection in ovs_vport_cmd_fill_info()Eric Dumazet
[ Upstream commit 90b2f49a502fa71090d9f4fe29a2f51fe5dff76d ] ovs_vport_cmd_fill_info() can be called without RTNL or RCU. Use RCU protection and dev_net_rcu() to avoid potential UAF. Fixes: 9354d4520342 ("openvswitch: reliable interface indentification in port dumps") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250207135841.1948589-6-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13arp: use RCU protection in arp_xmit()Eric Dumazet
[ Upstream commit a42b69f692165ec39db42d595f4f65a4c8f42e44 ] arp_xmit() can be called without RTNL or RCU protection. Use RCU protection to avoid potential UAF. Fixes: 29a26a568038 ("netfilter: Pass struct net into the netfilter hooks") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250207135841.1948589-5-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13neighbour: use RCU protection in __neigh_notify()Eric Dumazet
[ Upstream commit becbd5850c03ed33b232083dd66c6e38c0c0e569 ] __neigh_notify() can be called without RTNL or RCU protection. Use RCU protection to avoid potential UAF. Fixes: 426b5303eb43 ("[NETNS]: Modify the neighbour table code so it handles multiple network namespaces") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250207135841.1948589-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13neighbour: delete redundant judgment statementsLi Zetao
[ Upstream commit c25bdd2ac8cf7da70a226f1a66cdce7af15ff86f ] The initial value of err is -ENOBUFS, and err is guaranteed to be less than 0 before all goto errout. Therefore, on the error path of errout, there is no need to repeatedly judge that err is less than 0, and delete redundant judgments to make the code more concise. Signed-off-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: becbd5850c03 ("neighbour: use RCU protection in __neigh_notify()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13ndisc: use RCU protection in ndisc_alloc_skb()Eric Dumazet
[ Upstream commit 628e6d18930bbd21f2d4562228afe27694f66da9 ] ndisc_alloc_skb() can be called without RTNL or RCU being held. Add RCU protection to avoid possible UAF. Fixes: de09334b9326 ("ndisc: Introduce ndisc_alloc_skb() helper.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250207135841.1948589-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13ipv6: use RCU protection in ip6_default_advmss()Eric Dumazet
[ Upstream commit 3c8ffcd248da34fc41e52a46e51505900115fc2a ] ip6_default_advmss() needs rcu protection to make sure the net structure it reads does not disappear. Fixes: 5578689a4e3c ("[NETNS][IPV6] route6 - make route6 per namespace") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250205155120.1676781-11-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13ipv4: use RCU protection in inet_select_addr()Eric Dumazet
[ Upstream commit 719817cd293e4fa389e1f69c396f3f816ed5aa41 ] inet_select_addr() must use RCU protection to make sure the net structure it reads does not disappear. Fixes: c4544c724322 ("[NETNS]: Process inet_select_addr inside a namespace.") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250205155120.1676781-7-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13ipv4: use RCU protection in rt_is_expired()Eric Dumazet
[ Upstream commit dd205fcc33d92d54eee4d7f21bb073af9bd5ce2b ] rt_is_expired() must use RCU protection to make sure the net structure it reads does not disappear. Fixes: e84f84f27647 ("netns: place rt_genid into struct net") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250205155120.1676781-6-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13can: j1939: j1939_sk_send_loop(): fix unable to send messages with data ↵Alexander Hölzl
length zero commit 44de577e61ed239db09f0da9d436866bef9b77dd upstream. The J1939 standard requires the transmission of messages of length 0. For example proprietary messages are specified with a data length of 0 to 1785. The transmission of such messages is not possible. Sending results in no error being returned but no corresponding can frame being generated. Enable the transmission of zero length J1939 messages. In order to facilitate this two changes are necessary: 1) If the transmission of a new message is requested from user space the message is segmented in j1939_sk_send_loop(). Let the segmentation take into account zero length messages, do not terminate immediately, queue the corresponding skb. 2) j1939_session_skb_get_by_offset() selects the next skb to transmit for a session. Take into account that there might be zero length skbs in the queue. Signed-off-by: Alexander Hölzl <alexander.hoelzl@gmx.net> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20250205174651.103238-1-alexander.hoelzl@gmx.net Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Cc: stable@vger.kernel.org [mkl: commit message rephrased] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13batman-adv: fix panic during interface removalAndy Strohman
commit ccb7276a6d26d6f8416e315b43b45e15ee7f29e2 upstream. Reference counting is used to ensure that batadv_hardif_neigh_node and batadv_hard_iface are not freed before/during batadv_v_elp_throughput_metric_update work is finished. But there isn't a guarantee that the hard if will remain associated with a soft interface up until the work is finished. This fixes a crash triggered by reboot that looks like this: Call trace: batadv_v_mesh_free+0xd0/0x4dc [batman_adv] batadv_v_elp_throughput_metric_update+0x1c/0xa4 process_one_work+0x178/0x398 worker_thread+0x2e8/0x4d0 kthread+0xd8/0xdc ret_from_fork+0x10/0x20 (the batadv_v_mesh_free call is misleading, and does not actually happen) I was able to make the issue happen more reliably by changing hardif_neigh->bat_v.metric_work work to be delayed work. This allowed me to track down and confirm the fix. Cc: stable@vger.kernel.org Fixes: c833484e5f38 ("batman-adv: ELP - compute the metric based on the estimated throughput") Signed-off-by: Andy Strohman <andrew@andrewstrohman.com> [sven@narfation.org: prevent entering batadv_v_elp_get_throughput without soft_iface] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13ndisc: ndisc_send_redirect() must use dev_get_by_index_rcu()Eric Dumazet
[ Upstream commit 48145a57d4bbe3496e8e4880b23ea6b511e6e519 ] ndisc_send_redirect() is called under RCU protection, not RTNL. It must use dev_get_by_index_rcu() instead of __dev_get_by_index() Fixes: 2f17becfbea5 ("vrf: check the original netdevice for generating redirect") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250207135841.1948589-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13net/ncsi: wait for the last response to Deselect Package before configuring ↵Paul Fertser
channel commit 6bb194d036c6e1b329dcdff459338cdd9a54802a upstream. The NCSI state machine as it's currently implemented assumes that transition to the next logical state is performed either explicitly by calling `schedule_work(&ndp->work)` to re-queue itself or implicitly after processing the predefined (ndp->pending_req_num) number of replies. Thus to avoid the configuration FSM from advancing prematurely and getting out of sync with the process it's essential to not skip waiting for a reply. This patch makes the code wait for reception of the Deselect Package response for the last package probed before proceeding to channel configuration. Thanks go to Potin Lai and Cosmo Chou for the initial investigation and testing. Fixes: 8e13f70be05e ("net/ncsi: Probe single packages to avoid conflict") Cc: stable@vger.kernel.org Signed-off-by: Paul Fertser <fercerpav@gmail.com> Link: https://patch.msgid.link/20250116152900.8656-1-fercerpav@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13NFC: nci: Add bounds checking in nci_hci_create_pipe()Dan Carpenter
commit 110b43ef05342d5a11284cc8b21582b698b4ef1c upstream. The "pipe" variable is a u8 which comes from the network. If it's more than 127, then it results in memory corruption in the caller, nci_hci_connect_gate(). Cc: stable@vger.kernel.org Fixes: a1b0b9415817 ("NFC: nci: Create pipe on specific gate in nci_hci_connect_gate") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/bcf5453b-7204-4297-9c20-4d8c7dacf586@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13Bluetooth: L2CAP: handle NULL sock pointer in l2cap_sock_allocFedor Pchelkin
commit 5f397409f8ee5bc82901eeaf799e1cbc4f8edcf1 upstream. A NULL sock pointer is passed into l2cap_sock_alloc() when it is called from l2cap_sock_new_connection_cb() and the error handling paths should also be aware of it. Seemingly a more elegant solution would be to swap bt_sock_alloc() and l2cap_chan_create() calls since they are not interdependent to that moment but then l2cap_chan_create() adds the soon to be deallocated and still dummy-initialized channel to the global list accessible by many L2CAP paths. The channel would be removed from the list in short period of time but be a bit more straight-forward here and just check for NULL instead of changing the order of function calls. Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool. Fixes: 7c4f78cdb8e7 ("Bluetooth: L2CAP: do not leave dangling sk pointer on error in l2cap_sock_create()") Cc: stable@vger.kernel.org Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13netem: Update sch->q.qlen before qdisc_tree_reduce_backlog()Cong Wang
[ Upstream commit 638ba5089324796c2ee49af10427459c2de35f71 ] qdisc_tree_reduce_backlog() notifies parent qdisc only if child qdisc becomes empty, therefore we need to reduce the backlog of the child qdisc before calling it. Otherwise it would miss the opportunity to call cops->qlen_notify(), in the case of DRR, it resulted in UAF since DRR uses ->qlen_notify() to maintain its active list. Fixes: f8d4bc455047 ("net/sched: netem: account for backlog updates from child qdisc") Cc: Martin Ottens <martin.ottens@fau.de> Reported-by: Mingi Cho <mincho@theori.io> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Link: https://patch.msgid.link/20250204005841.223511-4-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13net: rose: lock the socket in rose_bind()Eric Dumazet
[ Upstream commit a1300691aed9ee852b0a9192e29e2bdc2411a7e6 ] syzbot reported a soft lockup in rose_loopback_timer(), with a repro calling bind() from multiple threads. rose_bind() must lock the socket to avoid this issue. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+7ff41b5215f0c534534e@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/67a0f78d.050a0220.d7c5a.00a0.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://patch.msgid.link/20250203170838.3521361-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13udp: gso: do not drop small packets when PMTU reducesYan Zhai
[ Upstream commit 235174b2bed88501fda689c113c55737f99332d8 ] Commit 4094871db1d6 ("udp: only do GSO if # of segs > 1") avoided GSO for small packets. But the kernel currently dismisses GSO requests only after checking MTU/PMTU on gso_size. This means any packets, regardless of their payload sizes, could be dropped when PMTU becomes smaller than requested gso_size. We encountered this issue in production and it caused a reliability problem that new QUIC connection cannot be established before PMTU cache expired, while non GSO sockets still worked fine at the same time. Ideally, do not check any GSO related constraints when payload size is smaller than requested gso_size, and return EMSGSIZE instead of EINVAL on MTU/PMTU check failure to be more specific on the error cause. Fixes: 4094871db1d6 ("udp: only do GSO if # of segs > 1") Signed-off-by: Yan Zhai <yan@cloudflare.com> Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13sched: sch_cake: add bounds checks to host bulk flow fairness countsToke Høiland-Jørgensen
commit 737d4d91d35b5f7fa5bb442651472277318b0bfd upstream. Even though we fixed a logic error in the commit cited below, syzbot still managed to trigger an underflow of the per-host bulk flow counters, leading to an out of bounds memory access. To avoid any such logic errors causing out of bounds memory accesses, this commit factors out all accesses to the per-host bulk flow counters to a series of helpers that perform bounds-checking before any increments and decrements. This also has the benefit of improving readability by moving the conditional checks for the flow mode into these helpers, instead of having them spread out throughout the code (which was the cause of the original logic error). As part of this change, the flow quantum calculation is consolidated into a helper function, which means that the dithering applied to the ost load scaling is now applied both in the DRR rotation and when a sparse flow's quantum is first initiated. The only user-visible effect of this is that the maximum packet size that can be sent while a flow stays sparse will now vary with +/- one byte in some cases. This should not make a noticeable difference in practice, and thus it's not worth complicating the code to preserve the old behaviour. Fixes: 546ea84d07e3 ("sched: sch_cake: fix bulk flow accounting logic for host fairness") Reported-by: syzbot+f63600d288bfb7057424@syzkaller.appspotmail.com Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Dave Taht <dave.taht@gmail.com> Link: https://patch.msgid.link/20250107120105.70685-1-toke@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> [Hagar: needed contextual fixes due to missing commit 7e3cf0843fe5] Signed-off-by: Hagar Hemdan <hagarhem@amazon.com> Reviewed-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13vsock: Allow retrying on connect() failureMichal Luczaj
[ Upstream commit aa388c72113b7458127b709bdd7d3628af26e9b4 ] sk_err is set when a (connectible) connect() fails. Effectively, this makes an otherwise still healthy SS_UNCONNECTED socket impossible to use for any subsequent connection attempts. Clear sk_err upon trying to establish a connection. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-2-1cf57065b770@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13net: rose: fix timer races against user threadsEric Dumazet
[ Upstream commit 5de7665e0a0746b5ad7943554b34db8f8614a196 ] Rose timers only acquire the socket spinlock, without checking if the socket is owned by one user thread. Add a check and rearm the timers if needed. BUG: KASAN: slab-use-after-free in rose_timer_expiry+0x31d/0x360 net/rose/rose_timer.c:174 Read of size 2 at addr ffff88802f09b82a by task swapper/0/0 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5-syzkaller-00172-gd1bf27c4e176 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 rose_timer_expiry+0x31d/0x360 net/rose/rose_timer.c:174 call_timer_fn+0x187/0x650 kernel/time/timer.c:1793 expire_timers kernel/time/timer.c:1844 [inline] __run_timers kernel/time/timer.c:2418 [inline] __run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2430 run_timer_base kernel/time/timer.c:2439 [inline] run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2449 handle_softirqs+0x2d4/0x9b0 kernel/softirq.c:561 __do_softirq kernel/softirq.c:595 [inline] invoke_softirq kernel/softirq.c:435 [inline] __irq_exit_rcu+0xf7/0x220 kernel/softirq.c:662 irq_exit_rcu+0x9/0x30 kernel/softirq.c:678 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1049 </IRQ> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250122180244.1861468-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13ipmr: do not call mr_mfc_uses_dev() for unres entriesEric Dumazet
[ Upstream commit 15a901361ec3fb1c393f91880e1cbf24ec0a88bd ] syzbot found that calling mr_mfc_uses_dev() for unres entries would crash [1], because c->mfc_un.res.minvif / c->mfc_un.res.maxvif alias to "struct sk_buff_head unresolved", which contain two pointers. This code never worked, lets remove it. [1] Unable to handle kernel paging request at virtual address ffff5fff2d536613 KASAN: maybe wild-memory-access in range [0xfffefff96a9b3098-0xfffefff96a9b309f] Modules linked in: CPU: 1 UID: 0 PID: 7321 Comm: syz.0.16 Not tainted 6.13.0-rc7-syzkaller-g1950a0af2d55 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mr_mfc_uses_dev net/ipv4/ipmr_base.c:290 [inline] pc : mr_table_dump+0x5a4/0x8b0 net/ipv4/ipmr_base.c:334 lr : mr_mfc_uses_dev net/ipv4/ipmr_base.c:289 [inline] lr : mr_table_dump+0x694/0x8b0 net/ipv4/ipmr_base.c:334 Call trace: mr_mfc_uses_dev net/ipv4/ipmr_base.c:290 [inline] (P) mr_table_dump+0x5a4/0x8b0 net/ipv4/ipmr_base.c:334 (P) mr_rtm_dumproute+0x254/0x454 net/ipv4/ipmr_base.c:382 ipmr_rtm_dumproute+0x248/0x4b4 net/ipv4/ipmr.c:2648 rtnl_dump_all+0x2e4/0x4e8 net/core/rtnetlink.c:4327 rtnl_dumpit+0x98/0x1d0 net/core/rtnetlink.c:6791 netlink_dump+0x4f0/0xbc0 net/netlink/af_netlink.c:2317 netlink_recvmsg+0x56c/0xe64 net/netlink/af_netlink.c:1973 sock_recvmsg_nosec net/socket.c:1033 [inline] sock_recvmsg net/socket.c:1055 [inline] sock_read_iter+0x2d8/0x40c net/socket.c:1125 new_sync_read fs/read_write.c:484 [inline] vfs_read+0x740/0x970 fs/read_write.c:565 ksys_read+0x15c/0x26c fs/read_write.c:708 Fixes: cb167893f41e ("net: Plumb support for filtering ipv4 and ipv6 multicast route dumps") Reported-by: syzbot+5cfae50c0e5f2c500013@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/678fe2d1.050a0220.15cac.00b3.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250121181241.841212-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13net: sched: Disallow replacing of child qdisc from one parent to anotherJamal Hadi Salim
[ Upstream commit bc50835e83f60f56e9bec2b392fb5544f250fb6f ] Lion Ackermann was able to create a UAF which can be abused for privilege escalation with the following script Step 1. create root qdisc tc qdisc add dev lo root handle 1:0 drr step2. a class for packet aggregation do demonstrate uaf tc class add dev lo classid 1:1 drr step3. a class for nesting tc class add dev lo classid 1:2 drr step4. a class to graft qdisc to tc class add dev lo classid 1:3 drr step5. tc qdisc add dev lo parent 1:1 handle 2:0 plug limit 1024 step6. tc qdisc add dev lo parent 1:2 handle 3:0 drr step7. tc class add dev lo classid 3:1 drr step 8. tc qdisc add dev lo parent 3:1 handle 4:0 pfifo step 9. Display the class/qdisc layout tc class ls dev lo class drr 1:1 root leaf 2: quantum 64Kb class drr 1:2 root leaf 3: quantum 64Kb class drr 3:1 root leaf 4: quantum 64Kb tc qdisc ls qdisc drr 1: dev lo root refcnt 2 qdisc plug 2: dev lo parent 1:1 qdisc pfifo 4: dev lo parent 3:1 limit 1000p qdisc drr 3: dev lo parent 1:2 step10. trigger the bug <=== prevented by this patch tc qdisc replace dev lo parent 1:3 handle 4:0 step 11. Redisplay again the qdiscs/classes tc class ls dev lo class drr 1:1 root leaf 2: quantum 64Kb class drr 1:2 root leaf 3: quantum 64Kb class drr 1:3 root leaf 4: quantum 64Kb class drr 3:1 root leaf 4: quantum 64Kb tc qdisc ls qdisc drr 1: dev lo root refcnt 2 qdisc plug 2: dev lo parent 1:1 qdisc pfifo 4: dev lo parent 3:1 refcnt 2 limit 1000p qdisc drr 3: dev lo parent 1:2 Observe that a) parent for 4:0 does not change despite the replace request. There can only be one parent. b) refcount has gone up by two for 4:0 and c) both class 1:3 and 3:1 are pointing to it. Step 12. send one packet to plug echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10001)) step13. send one packet to the grafted fifo echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10003)) step14. lets trigger the uaf tc class delete dev lo classid 1:3 tc class delete dev lo classid 1:1 The semantics of "replace" is for a del/add _on the same node_ and not a delete from one node(3:1) and add to another node (1:3) as in step10. While we could "fix" with a more complex approach there could be consequences to expectations so the patch takes the preventive approach of "disallow such config". Joint work with Lion Ackermann <nnamrec@gmail.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250116013713.900000-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13net: let net.core.dev_weight always be non-zeroLiu Jian
[ Upstream commit d1f9f79fa2af8e3b45cffdeef66e05833480148a ] The following problem was encountered during stability test: (NULL net_device): NAPI poll function process_backlog+0x0/0x530 \ returned 1, exceeding its budget of 0. ------------[ cut here ]------------ list_add double add: new=ffff88905f746f48, prev=ffff88905f746f48, \ next=ffff88905f746e40. WARNING: CPU: 18 PID: 5462 at lib/list_debug.c:35 \ __list_add_valid_or_report+0xf3/0x130 CPU: 18 UID: 0 PID: 5462 Comm: ping Kdump: loaded Not tainted 6.13.0-rc7+ RIP: 0010:__list_add_valid_or_report+0xf3/0x130 Call Trace: ? __warn+0xcd/0x250 ? __list_add_valid_or_report+0xf3/0x130 enqueue_to_backlog+0x923/0x1070 netif_rx_internal+0x92/0x2b0 __netif_rx+0x15/0x170 loopback_xmit+0x2ef/0x450 dev_hard_start_xmit+0x103/0x490 __dev_queue_xmit+0xeac/0x1950 ip_finish_output2+0x6cc/0x1620 ip_output+0x161/0x270 ip_push_pending_frames+0x155/0x1a0 raw_sendmsg+0xe13/0x1550 __sys_sendto+0x3bf/0x4e0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x5b/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e The reproduction command is as follows: sysctl -w net.core.dev_weight=0 ping 127.0.0.1 This is because when the napi's weight is set to 0, process_backlog() may return 0 and clear the NAPI_STATE_SCHED bit of napi->state, causing this napi to be re-polled in net_rx_action() until __do_softirq() times out. Since the NAPI_STATE_SCHED bit has been cleared, napi_schedule_rps() can be retriggered in enqueue_to_backlog(), causing this issue. Making the napi's weight always non-zero solves this problem. Triggering this issue requires system-wide admin (setting is not namespaced). Fixes: e38766054509 ("[NET]: Fix sysctl net.core.dev_weight") Fixes: 3d48b53fb2ae ("net: dev_weight: TX/RX orthogonality") Signed-off-by: Liu Jian <liujian56@huawei.com> Link: https://patch.msgid.link/20250116143053.4146855-1-liujian56@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-01net: fix data-races around sk->sk_forward_allocWang Liang
commit 073d89808c065ac4c672c0a613a71b27a80691cb upstream. Syzkaller reported this warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 16 at net/ipv4/af_inet.c:156 inet_sock_destruct+0x1c5/0x1e0 Modules linked in: CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.12.0-rc5 #26 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:inet_sock_destruct+0x1c5/0x1e0 Code: 24 12 4c 89 e2 5b 48 c7 c7 98 ec bb 82 41 5c e9 d1 18 17 ff 4c 89 e6 5b 48 c7 c7 d0 ec bb 82 41 5c e9 bf 18 17 ff 0f 0b eb 83 <0f> 0b eb 97 0f 0b eb 87 0f 0b e9 68 ff ff ff 66 66 2e 0f 1f 84 00 RSP: 0018:ffffc9000008bd90 EFLAGS: 00010206 RAX: 0000000000000300 RBX: ffff88810b172a90 RCX: 0000000000000007 RDX: 0000000000000002 RSI: 0000000000000300 RDI: ffff88810b172a00 RBP: ffff88810b172a00 R08: ffff888104273c00 R09: 0000000000100007 R10: 0000000000020000 R11: 0000000000000006 R12: ffff88810b172a00 R13: 0000000000000004 R14: 0000000000000000 R15: ffff888237c31f78 FS: 0000000000000000(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffc63fecac8 CR3: 000000000342e000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn+0x88/0x130 ? inet_sock_destruct+0x1c5/0x1e0 ? report_bug+0x18e/0x1a0 ? handle_bug+0x53/0x90 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? inet_sock_destruct+0x1c5/0x1e0 __sk_destruct+0x2a/0x200 rcu_do_batch+0x1aa/0x530 ? rcu_do_batch+0x13b/0x530 rcu_core+0x159/0x2f0 handle_softirqs+0xd3/0x2b0 ? __pfx_smpboot_thread_fn+0x10/0x10 run_ksoftirqd+0x25/0x30 smpboot_thread_fn+0xdd/0x1d0 kthread+0xd3/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace 0000000000000000 ]--- Its possible that two threads call tcp_v6_do_rcv()/sk_forward_alloc_add() concurrently when sk->sk_state == TCP_LISTEN with sk->sk_lock unlocked, which triggers a data-race around sk->sk_forward_alloc: tcp_v6_rcv tcp_v6_do_rcv skb_clone_and_charge_r sk_rmem_schedule __sk_mem_schedule sk_forward_alloc_add() skb_set_owner_r sk_mem_charge sk_forward_alloc_add() __kfree_skb skb_release_all skb_release_head_state sock_rfree sk_mem_uncharge sk_forward_alloc_add() sk_mem_reclaim // set local var reclaimable __sk_mem_reclaim sk_forward_alloc_add() In this syzkaller testcase, two threads call tcp_v6_do_rcv() with skb->truesize=768, the sk_forward_alloc changes like this: (cpu 1) | (cpu 2) | sk_forward_alloc ... | ... | 0 __sk_mem_schedule() | | +4096 = 4096 | __sk_mem_schedule() | +4096 = 8192 sk_mem_charge() | | -768 = 7424 | sk_mem_charge() | -768 = 6656 ... | ... | sk_mem_uncharge() | | +768 = 7424 reclaimable=7424 | | | sk_mem_uncharge() | +768 = 8192 | reclaimable=8192 | __sk_mem_reclaim() | | -4096 = 4096 | __sk_mem_reclaim() | -8192 = -4096 != 0 The skb_clone_and_charge_r() should not be called in tcp_v6_do_rcv() when sk->sk_state is TCP_LISTEN, it happens later in tcp_v6_syn_recv_sock(). Fix the same issue in dccp_v6_do_rcv(). Suggested-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Fixes: e994b2f0fb92 ("tcp: do not lock listener to process SYN packets") Signed-off-by: Wang Liang <wangliang74@huawei.com> Link: https://patch.msgid.link/20241107023405.889239-1-wangliang74@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alva Lan <alvalan9@foxmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-01ipv6: avoid possible NULL deref in rt6_uncached_list_flush_dev()Eric Dumazet
commit 04ccecfa959d3b9ae7348780d8e379c6486176ac upstream. Blamed commit accidentally removed a check for rt->rt6i_idev being NULL, as spotted by syzbot: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 UID: 0 PID: 10998 Comm: syz-executor Not tainted 6.11.0-rc6-syzkaller-00208-g625403177711 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:rt6_uncached_list_flush_dev net/ipv6/route.c:177 [inline] RIP: 0010:rt6_disable_ip+0x33e/0x7e0 net/ipv6/route.c:4914 Code: 41 80 3c 04 00 74 0a e8 90 d0 9b f7 48 8b 7c 24 08 48 8b 07 48 89 44 24 10 4c 89 f0 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 4c 89 f7 e8 64 d0 9b f7 48 8b 44 24 18 49 39 06 RSP: 0018:ffffc900047374e0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 1ffff1100fdf8f33 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff88807efc78c0 RBP: ffffc900047375d0 R08: 0000000000000003 R09: fffff520008e6e8c R10: dffffc0000000000 R11: fffff520008e6e8c R12: 1ffff1100fdf8f18 R13: ffff88807efc7998 R14: 0000000000000000 R15: ffff88807efc7930 FS: 0000000000000000(0000) GS:ffff8880b8900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020002a80 CR3: 0000000022f62000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> addrconf_ifdown+0x15d/0x1bd0 net/ipv6/addrconf.c:3856 addrconf_notify+0x3cb/0x1020 notifier_call_chain+0x19f/0x3e0 kernel/notifier.c:93 call_netdevice_notifiers_extack net/core/dev.c:2032 [inline] call_netdevice_notifiers net/core/dev.c:2046 [inline] unregister_netdevice_many_notify+0xd81/0x1c40 net/core/dev.c:11352 unregister_netdevice_many net/core/dev.c:11414 [inline] unregister_netdevice_queue+0x303/0x370 net/core/dev.c:11289 unregister_netdevice include/linux/netdevice.h:3129 [inline] __tun_detach+0x6b9/0x1600 drivers/net/tun.c:685 tun_detach drivers/net/tun.c:701 [inline] tun_chr_close+0x108/0x1b0 drivers/net/tun.c:3510 __fput+0x24a/0x8a0 fs/file_table.c:422 task_work_run+0x24f/0x310 kernel/task_work.c:228 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xa2f/0x27f0 kernel/exit.c:882 do_group_exit+0x207/0x2c0 kernel/exit.c:1031 __do_sys_exit_group kernel/exit.c:1042 [inline] __se_sys_exit_group kernel/exit.c:1040 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1040 x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f1acc77def9 Code: Unable to access opcode bytes at 0x7f1acc77decf. RSP: 002b:00007ffeb26fa738 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1acc77def9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000043 RBP: 00007f1acc7dd508 R08: 00007ffeb26f84d7 R09: 0000000000000003 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000000003 R14: 00000000ffffffff R15: 00007ffeb26fa8e0 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:rt6_uncached_list_flush_dev net/ipv6/route.c:177 [inline] RIP: 0010:rt6_disable_ip+0x33e/0x7e0 net/ipv6/route.c:4914 Code: 41 80 3c 04 00 74 0a e8 90 d0 9b f7 48 8b 7c 24 08 48 8b 07 48 89 44 24 10 4c 89 f0 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 4c 89 f7 e8 64 d0 9b f7 48 8b 44 24 18 49 39 06 RSP: 0018:ffffc900047374e0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 1ffff1100fdf8f33 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff88807efc78c0 RBP: ffffc900047375d0 R08: 0000000000000003 R09: fffff520008e6e8c R10: dffffc0000000000 R11: fffff520008e6e8c R12: 1ffff1100fdf8f18 R13: ffff88807efc7998 R14: 0000000000000000 R15: ffff88807efc7930 FS: 0000000000000000(0000) GS:ffff8880b8900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020002a80 CR3: 0000000022f62000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: e332bc67cf5e ("ipv6: Don't call with rt6_uncached_list_flush_dev") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://patch.msgid.link/20240913083147.3095442-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: BRUNO VERNAY <bruno.vernay@se.com> Signed-off-by: Hugo SIMELIERE <hsimeliere.opensource@witekio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-01mac802154: check local interfaces before deleting sdata listLizhi Xu
[ Upstream commit eb09fbeb48709fe66c0d708aed81e910a577a30a ] syzkaller reported a corrupted list in ieee802154_if_remove. [1] Remove an IEEE 802.15.4 network interface after unregister an IEEE 802.15.4 hardware device from the system. CPU0 CPU1 ==== ==== genl_family_rcv_msg_doit ieee802154_unregister_hw ieee802154_del_iface ieee802154_remove_interfaces rdev_del_virtual_intf_deprecated list_del(&sdata->list) ieee802154_if_remove list_del_rcu The net device has been unregistered, since the rcu grace period, unregistration must be run before ieee802154_if_remove. To avoid this issue, add a check for local->interfaces before deleting sdata list. [1] kernel BUG at lib/list_debug.c:58! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 UID: 0 PID: 6277 Comm: syz-executor157 Not tainted 6.12.0-rc6-syzkaller-00005-g557329bcecc2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__list_del_entry_valid_or_report+0xf4/0x140 lib/list_debug.c:56 Code: e8 a1 7e 00 07 90 0f 0b 48 c7 c7 e0 37 60 8c 4c 89 fe e8 8f 7e 00 07 90 0f 0b 48 c7 c7 40 38 60 8c 4c 89 fe e8 7d 7e 00 07 90 <0f> 0b 48 c7 c7 a0 38 60 8c 4c 89 fe e8 6b 7e 00 07 90 0f 0b 48 c7 RSP: 0018:ffffc9000490f3d0 EFLAGS: 00010246 RAX: 000000000000004e RBX: dead000000000122 RCX: d211eee56bb28d00 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffff88805b278dd8 R08: ffffffff8174a12c R09: 1ffffffff2852f0d R10: dffffc0000000000 R11: fffffbfff2852f0e R12: dffffc0000000000 R13: dffffc0000000000 R14: dead000000000100 R15: ffff88805b278cc0 FS: 0000555572f94380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000056262e4a3000 CR3: 0000000078496000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __list_del_entry_valid include/linux/list.h:124 [inline] __list_del_entry include/linux/list.h:215 [inline] list_del_rcu include/linux/rculist.h:157 [inline] ieee802154_if_remove+0x86/0x1e0 net/mac802154/iface.c:687 rdev_del_virtual_intf_deprecated net/ieee802154/rdev-ops.h:24 [inline] ieee802154_del_iface+0x2c0/0x5c0 net/ieee802154/nl-phy.c:323 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0xb14/0xec0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2551 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1357 netlink_sendmsg+0x8e4/0xcb0 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:744 ____sys_sendmsg+0x52a/0x7e0 net/socket.c:2607 ___sys_sendmsg net/socket.c:2661 [inline] __sys_sendmsg+0x292/0x380 net/socket.c:2690 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Reported-and-tested-by: syzbot+985f827280dc3a6e7e92@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=985f827280dc3a6e7e92 Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/20241113095129.1457225-1-lizhi.xu@windriver.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-01net: add exit_batch_rtnl() methodEric Dumazet
[ Upstream commit fd4f101edbd9f99567ab2adb1f2169579ede7c13 ] Many (struct pernet_operations)->exit_batch() methods have to acquire rtnl. In presence of rtnl mutex pressure, this makes cleanup_net() very slow. This patch adds a new exit_batch_rtnl() method to reduce number of rtnl acquisitions from cleanup_net(). exit_batch_rtnl() handlers are called while rtnl is locked, and devices to be killed can be queued in a list provided as their second argument. A single unregister_netdevice_many() is called right before rtnl is released. exit_batch_rtnl() handlers are called before ->exit() and ->exit_batch() handlers. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/20240206144313.2050392-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 46841c7053e6 ("gtp: Use for_each_netdev_rcu() in gtp_genl_dump_pdp().") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-01net: net_namespace: Optimize the codeYajun Deng
[ Upstream commit 41467d2ff4dfe1837cbb0f45e2088e6e787580c6 ] There is only one caller for ops_free(), so inline it. Separate net_drop_ns() and net_free(), so the net_free() can be called directly. Add free_exit_list() helper function for free net_exit_list. ==================== v2: - v1 does not apply, rebase it. ==================== Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 46841c7053e6 ("gtp: Use for_each_netdev_rcu() in gtp_genl_dump_pdp().") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-01sctp: sysctl: rto_min/max: avoid using current->nsproxyMatthieu Baerts (NGI0)
[ Upstream commit 9fc17b76fc70763780aa78b38fcf4742384044a5 ] As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, as this is the only member needed from the 'net' structure, but that would increase the size of this fix, to use '*data' everywhere 'net->sctp.rto_min/max' is used. Fixes: 4f3fdf3bc59c ("sctp: add check rto_min and rto_max in sysctl") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1] Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-5-5df34b2083e8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-01sctp: sysctl: auth_enable: avoid using current->nsproxyMatthieu Baerts (NGI0)
commit 15649fd5415eda664ef35780c2013adeb5d9c695 upstream. As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, but that would increase the size of this fix, while 'sctp.ctl_sock' still needs to be retrieved from 'net' structure. Fixes: b14878ccb7fa ("net: sctp: cache auth_enable per endpoint") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1] Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-6-5df34b2083e8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 02:33:01 +0000