summaryrefslogtreecommitdiff
path: root/net/wireless
AgeCommit message (Collapse)Author
2024-09-08wifi: cfg80211: make hash table duplicates more survivableJohannes Berg
[ Upstream commit 7f12e26a194d0043441f870708093d9c2c3bad7d ] Jiazi Li reported that they occasionally see hash table duplicates as evidenced by the WARN_ON() in rb_insert_bss() in this code. It isn't clear how that happens, nor have I been able to reproduce it, but if it does happen, the kernel crashes later, when it tries to unhash the entry that's now not hashed. Try to make this situation more survivable by removing the BSS from the list(s) as well, that way it's fully leaked here (as had been the intent in the hash insert error path), and no longer reachable through the list(s) so it shouldn't be unhashed again later. Link: https://lore.kernel.org/r/20231026013528.GA24122@Jiazi.Li Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240607181726.36835-2-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29wifi: cfg80211: check wiphy mutex is held for wdev mutexJohannes Berg
[ Upstream commit 1474bc87fe57deac726cc10203f73daa6c3212f7 ] This might seem pretty pointless rather than changing the locking immediately, but it seems safer to run for a while with checks and the old locking scheme, and then remove the wdev lock later. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-19wifi: cfg80211: restrict NL80211_ATTR_TXQ_QUANTUM valuesEric Dumazet
[ Upstream commit d1cba2ea8121e7fdbe1328cea782876b1dd80993 ] syzbot is able to trigger softlockups, setting NL80211_ATTR_TXQ_QUANTUM to 2^31. We had a similar issue in sch_fq, fixed with commit d9e15a273306 ("pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM") watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [kworker/1:0:24] Modules linked in: irq event stamp: 131135 hardirqs last enabled at (131134): [<ffff80008ae8778c>] __exit_to_kernel_mode arch/arm64/kernel/entry-common.c:85 [inline] hardirqs last enabled at (131134): [<ffff80008ae8778c>] exit_to_kernel_mode+0xdc/0x10c arch/arm64/kernel/entry-common.c:95 hardirqs last disabled at (131135): [<ffff80008ae85378>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (131135): [<ffff80008ae85378>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (125892): [<ffff80008907e82c>] neigh_hh_init net/core/neighbour.c:1538 [inline] softirqs last enabled at (125892): [<ffff80008907e82c>] neigh_resolve_output+0x268/0x658 net/core/neighbour.c:1553 softirqs last disabled at (125896): [<ffff80008904166c>] local_bh_disable+0x10/0x34 include/linux/bottom_half.h:19 CPU: 1 PID: 24 Comm: kworker/1:0 Not tainted 6.9.0-rc7-syzkaller-gfda5695d692c #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Workqueue: mld mld_ifc_work pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __list_del include/linux/list.h:195 [inline] pc : __list_del_entry include/linux/list.h:218 [inline] pc : list_move_tail include/linux/list.h:310 [inline] pc : fq_tin_dequeue include/net/fq_impl.h:112 [inline] pc : ieee80211_tx_dequeue+0x6b8/0x3b4c net/mac80211/tx.c:3854 lr : __list_del_entry include/linux/list.h:218 [inline] lr : list_move_tail include/linux/list.h:310 [inline] lr : fq_tin_dequeue include/net/fq_impl.h:112 [inline] lr : ieee80211_tx_dequeue+0x67c/0x3b4c net/mac80211/tx.c:3854 sp : ffff800093d36700 x29: ffff800093d36a60 x28: ffff800093d36960 x27: dfff800000000000 x26: ffff0000d800ad50 x25: ffff0000d800abe0 x24: ffff0000d800abf0 x23: ffff0000e0032468 x22: ffff0000e00324d4 x21: ffff0000d800abf0 x20: ffff0000d800abf8 x19: ffff0000d800abf0 x18: ffff800093d363c0 x17: 000000000000d476 x16: ffff8000805519dc x15: ffff7000127a6cc8 x14: 1ffff000127a6cc8 x13: 0000000000000004 x12: ffffffffffffffff x11: ffff7000127a6cc8 x10: 0000000000ff0100 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffff80009287aa08 x4 : 0000000000000008 x3 : ffff80008034c7fc x2 : ffff0000e0032468 x1 : 00000000da0e46b8 x0 : ffff0000e0032470 Call trace: __list_del include/linux/list.h:195 [inline] __list_del_entry include/linux/list.h:218 [inline] list_move_tail include/linux/list.h:310 [inline] fq_tin_dequeue include/net/fq_impl.h:112 [inline] ieee80211_tx_dequeue+0x6b8/0x3b4c net/mac80211/tx.c:3854 wake_tx_push_queue net/mac80211/util.c:294 [inline] ieee80211_handle_wake_tx_queue+0x118/0x274 net/mac80211/util.c:315 drv_wake_tx_queue net/mac80211/driver-ops.h:1350 [inline] schedule_and_wake_txq net/mac80211/driver-ops.h:1357 [inline] ieee80211_queue_skb+0x18e8/0x2244 net/mac80211/tx.c:1664 ieee80211_tx+0x260/0x400 net/mac80211/tx.c:1966 ieee80211_xmit+0x278/0x354 net/mac80211/tx.c:2062 __ieee80211_subif_start_xmit+0xab8/0x122c net/mac80211/tx.c:4338 ieee80211_subif_start_xmit+0xe0/0x438 net/mac80211/tx.c:4532 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x27c/0x938 net/core/dev.c:3547 __dev_queue_xmit+0x1678/0x33fc net/core/dev.c:4341 dev_queue_xmit include/linux/netdevice.h:3091 [inline] neigh_resolve_output+0x558/0x658 net/core/neighbour.c:1563 neigh_output include/net/neighbour.h:542 [inline] ip6_finish_output2+0x104c/0x1ee8 net/ipv6/ip6_output.c:137 ip6_finish_output+0x428/0x7a0 net/ipv6/ip6_output.c:222 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x270/0x594 net/ipv6/ip6_output.c:243 dst_output include/net/dst.h:450 [inline] NF_HOOK+0x160/0x4f0 include/linux/netfilter.h:314 mld_sendpack+0x7b4/0x10f4 net/ipv6/mcast.c:1818 mld_send_cr net/ipv6/mcast.c:2119 [inline] mld_ifc_work+0x840/0xd0c net/ipv6/mcast.c:2650 process_one_work+0x7b8/0x15d4 kernel/workqueue.c:3267 process_scheduled_works kernel/workqueue.c:3348 [inline] worker_thread+0x938/0xef4 kernel/workqueue.c:3429 kthread+0x288/0x310 kernel/kthread.c:388 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Fixes: 52539ca89f36 ("cfg80211: Expose TXQ stats and parameters to userspace") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240615160800.250667-1-edumazet@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-14wifi: nl80211: don't give key data to userspaceJohannes Berg
[ Upstream commit a7e5793035792cc46a1a4b0a783655ffa897dfe9 ] When a key is requested by userspace, there's really no need to include the key data, the sequence counter is really what userspace needs in this case. The fact that it's included is just a historic quirk. Remove the key data. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240627104411.b6a4f097e4ea.I7e6cc976cb9e8a80ef25a3351330f313373b4578@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-14wifi: nl80211: disallow setting special AP channel widthsJohannes Berg
[ Upstream commit 23daf1b4c91db9b26f8425cc7039cf96d22ccbfe ] Setting the AP channel width is meant for use with the normal 20/40/... MHz channel width progression, and switching around in S1G or narrow channels isn't supported. Disallow that. Reported-by: syzbot+bc0f5b92cc7091f45fb6@syzkaller.appspotmail.com Link: https://msgid.link/20240515141600.d4a9590bfe32.I19a32d60097e81b527eafe6b0924f6c5fbb2dc45@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-11wifi: cfg80211: fix reporting failed MLO links status with cfg80211_connect_doneVeerendranath Jakkam
[ Upstream commit baeaabf970b9a90999f62ae27edf63f6cb86c023 ] Individual MLO links connection status is not copied to EVENT_CONNECT_RESULT data while processing the connect response information in cfg80211_connect_done(). Due to this failed links are wrongly indicated with success status in EVENT_CONNECT_RESULT. To fix this, copy the individual MLO links status to the EVENT_CONNECT_RESULT data. Fixes: 53ad07e9823b ("wifi: cfg80211: support reporting failed links") Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Reviewed-by: Carlos Llamas <cmllamas@google.com> Link: https://patch.msgid.link/20240724125327.3495874-1-quic_vjakkam@quicinc.com [commit message editorial changes] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03wifi: cfg80211: handle 2x996 RU allocation in cfg80211_calculate_bitrate_he()Baochen Qiang
[ Upstream commit bcbd771cd5d68c0c52567556097d75f9fc4e7cd6 ] Currently NL80211_RATE_INFO_HE_RU_ALLOC_2x996 is not handled in cfg80211_calculate_bitrate_he(), leading to below warning: kernel: invalid HE MCS: bw:6, ru:6 kernel: WARNING: CPU: 0 PID: 2312 at net/wireless/util.c:1501 cfg80211_calculate_bitrate_he+0x22b/0x270 [cfg80211] Fix it by handling 2x996 RU allocation in the same way as 160 MHz bandwidth. Fixes: c4cbaf7973a7 ("cfg80211: Add support for HE") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://msgid.link/20240606020653.33205-3-quic_bqiang@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03wifi: cfg80211: fix typo in cfg80211_calculate_bitrate_he()Baochen Qiang
[ Upstream commit 9ee0d44f055276fe2802b2f65058e920853f4f99 ] rates_996 is mistakenly written as rates_969, fix it. Fixes: c4cbaf7973a7 ("cfg80211: Add support for HE") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://msgid.link/20240606020653.33205-2-quic_bqiang@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-25wifi: cfg80211: wext: set ssids=NULL for passive scansJohannes Berg
commit 0941772342d59e48733131ac3a202fa1a4d832e9 upstream. In nl80211, we always set the ssids of a scan request to NULL when n_ssids==0 (passive scan). Drivers have relied on this behaviour in the past, so we fixed it in 6 GHz scan requests as well, and added a warning so we'd have assurance the API would always be called that way. syzbot found that wext doesn't ensure that, so we reach the check and trigger the warning. Fix the wext code to set the ssids pointer to NULL when there are none. Reported-by: syzbot+cd6135193ba6bb9ad158@syzkaller.appspotmail.com Fixes: f7a8b10bfd61 ("wifi: cfg80211: fix 6 GHz scan request building") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-25wifi: cfg80211: wext: add extra SIOCSIWSCAN data checkDmitry Antipov
[ Upstream commit 6ef09cdc5ba0f93826c09d810c141a8d103a80fc ] In 'cfg80211_wext_siwscan()', add extra check whether number of channels passed via 'ioctl(sock, SIOCSIWSCAN, ...)' doesn't exceed IW_MAX_FREQUENCIES and reject invalid request with -EINVAL otherwise. Reported-by: syzbot+253cd2d2491df77c93ac@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=253cd2d2491df77c93ac Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Link: https://msgid.link/20240531032010.451295-1-dmantipov@yandex.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-25wifi: cfg80211: fix 6 GHz scan request buildingJohannes Berg
[ Upstream commit f7a8b10bfd614d7a9a16fbe80d28ead4f063cb00 ] The 6 GHz scan request struct allocated by cfg80211_scan_6ghz() is meant to be formed this way: [base struct][channels][ssids][6ghz_params] It is allocated with [channels] as the maximum number of channels supported by the driver in the 6 GHz band, since allocation is before knowing how many there will be. However, the inner pointers are set incorrectly: initially, the 6 GHz scan parameters pointer is set: [base struct][channels] ^ scan_6ghz_params and later the SSID pointer is set to the end of the actually _used_ channels. [base struct][channels] ^ ssids If many APs were to be discovered, and many channels used, and there were many SSIDs, then the SSIDs could overlap the 6 GHz parameters. Additionally, the request->ssids for most of the function points to the original request still (given the struct copy) but is used normally, which is confusing. Clear this up, by actually using the allocated space for 6 GHz parameters _after_ the SSIDs, and set up the SSIDs initially so they are used more clearly. Just like in nl80211.c, set them only if there actually are SSIDs though. Finally, also copy the elements (ie/ie_len) so they're part of the same request, not pointing to the old request. Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240510113738.4190692ef4ee.I0cb19188be17a8abd029805e3373c0a7777c214c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-21wifi: cfg80211: pmsr: use correct nla_get_uX functionsLin Ma
[ Upstream commit ab904521f4de52fef4f179d2dfc1877645ef5f5c ] The commit 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API") defines four attributes NL80211_PMSR_FTM_REQ_ATTR_ {NUM_BURSTS_EXP}/{BURST_PERIOD}/{BURST_DURATION}/{FTMS_PER_BURST} in following ways. static const struct nla_policy nl80211_pmsr_ftm_req_attr_policy[NL80211_PMSR_FTM_REQ_ATTR_MAX + 1] = { ... [NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP] = NLA_POLICY_MAX(NLA_U8, 15), [NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD] = { .type = NLA_U16 }, [NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION] = NLA_POLICY_MAX(NLA_U8, 15), [NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST] = NLA_POLICY_MAX(NLA_U8, 31), ... }; That is, those attributes are expected to be NLA_U8 and NLA_U16 types. However, the consumers of these attributes in `pmsr_parse_ftm` blindly all use `nla_get_u32`, which is incorrect and causes functionality issues on little-endian platforms. Hence, fix them with the correct `nla_get_u8` and `nla_get_u16` functions. Fixes: 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API") Signed-off-by: Lin Ma <linma@zju.edu.cn> Link: https://msgid.link/20240521075059.47999-1-linma@zju.edu.cn Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-21wifi: cfg80211: Lock wiphy in cfg80211_get_stationRemi Pommarel
[ Upstream commit 642f89daa34567d02f312d03e41523a894906dae ] Wiphy should be locked before calling rdev_get_station() (see lockdep assert in ieee80211_get_station()). This fixes the following kernel NULL dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000003001000 [0000000000000050] pgd=0800000002dca003, p4d=0800000002dca003, pud=08000000028e9003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] SMP Modules linked in: netconsole dwc3_meson_g12a dwc3_of_simple dwc3 ip_gre gre ath10k_pci ath10k_core ath9k ath9k_common ath9k_hw ath CPU: 0 PID: 1091 Comm: kworker/u8:0 Not tainted 6.4.0-02144-g565f9a3a7911-dirty #705 Hardware name: RPT (r1) (DT) Workqueue: bat_events batadv_v_elp_throughput_metric_update pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ath10k_sta_statistics+0x10/0x2dc [ath10k_core] lr : sta_set_sinfo+0xcc/0xbd4 sp : ffff000007b43ad0 x29: ffff000007b43ad0 x28: ffff0000071fa900 x27: ffff00000294ca98 x26: ffff000006830880 x25: ffff000006830880 x24: ffff00000294c000 x23: 0000000000000001 x22: ffff000007b43c90 x21: ffff800008898acc x20: ffff00000294c6e8 x19: ffff000007b43c90 x18: 0000000000000000 x17: 445946354d552d78 x16: 62661f7200000000 x15: 57464f445946354d x14: 0000000000000000 x13: 00000000000000e3 x12: d5f0acbcebea978e x11: 00000000000000e3 x10: 000000010048fe41 x9 : 0000000000000000 x8 : ffff000007b43d90 x7 : 000000007a1e2125 x6 : 0000000000000000 x5 : ffff0000024e0900 x4 : ffff800000a0250c x3 : ffff000007b43c90 x2 : ffff00000294ca98 x1 : ffff000006831920 x0 : 0000000000000000 Call trace: ath10k_sta_statistics+0x10/0x2dc [ath10k_core] sta_set_sinfo+0xcc/0xbd4 ieee80211_get_station+0x2c/0x44 cfg80211_get_station+0x80/0x154 batadv_v_elp_get_throughput+0x138/0x1fc batadv_v_elp_throughput_metric_update+0x1c/0xa4 process_one_work+0x1ec/0x414 worker_thread+0x70/0x46c kthread+0xdc/0xe0 ret_from_fork+0x10/0x20 Code: a9bb7bfd 910003fd a90153f3 f9411c40 (f9402814) This happens because STA has time to disconnect and reconnect before batadv_v_elp_throughput_metric_update() delayed work gets scheduled. In this situation, ath10k_sta_state() can be in the middle of resetting arsta data when the work queue get chance to be scheduled and ends up accessing it. Locking wiphy prevents that. Fixes: 7406353d43c8 ("cfg80211: implement cfg80211_get_station cfg80211 API") Signed-off-by: Remi Pommarel <repk@triplefau.lt> Reviewed-by: Nicolas Escande <nico.escande@gmail.com> Acked-by: Antonio Quartulli <a@unstable.cc> Link: https://msgid.link/983b24a6a176e0800c01aedcd74480d9b551cb13.1716046653.git.repk@triplefau.lt Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-21wifi: cfg80211: fully move wiphy work to unbound workqueueJohannes Berg
[ Upstream commit e296c95eac655008d5a709b8cf54d0018da1c916 ] Previously I had moved the wiphy work to the unbound system workqueue, but missed that when it restarts and during resume it was still using the normal system workqueue. Fix that. Fixes: 91d20ab9d9ca ("wifi: cfg80211: use system_unbound_wq for wiphy work") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240522124126.7ca959f2cbd3.I3e2a71ef445d167b84000ccf934ea245aef8d395@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12wifi: nl80211: Avoid address calculations via out of bounds array indexingKees Cook
[ Upstream commit 838c7b8f1f278404d9d684c34a8cb26dc41aaaa1 ] Before request->channels[] can be used, request->n_channels must be set. Additionally, address calculations for memory after the "channels" array need to be calculated from the allocation base ("request") rather than via the first "out of bounds" index of "channels", otherwise run-time bounds checking will throw a warning. Reported-by: Nathan Chancellor <nathan@kernel.org> Fixes: e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by") Signed-off-by: Kees Cook <keescook@chromium.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Link: https://msgid.link/20240424220057.work.819-kees@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12wifi: cfg80211: fix the order of arguments for trace events of the tx_rx_evt ↵Igor Artemiev
class [ Upstream commit 9ef369973cd2c97cce3388d2c0c7e3c056656e8a ] The declarations of the tx_rx_evt class and the rdev_set_antenna event use the wrong order of arguments in the TP_ARGS macro. Fix the order of arguments in the TP_ARGS macro. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Igor Artemiev <Igor.A.Artemiev@mcst.ru> Link: https://msgid.link/20240405152431.270267-1-Igor.A.Artemiev@mcst.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17wifi: cfg80211: fix rdev_dump_mpp() arguments orderIgor Artemiev
[ Upstream commit ec50f3114e55406a1aad24b7dfaa1c3f4336d8eb ] Fix the order of arguments in the TP_ARGS macro for the rdev_dump_mpp tracepoint event. Found by Linux Verification Center (linuxtesting.org). Signed-off-by: Igor Artemiev <Igor.A.Artemiev@mcst.ru> Link: https://msgid.link/20240311164519.118398-1-Igor.A.Artemiev@mcst.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17wifi: nl80211: don't free NULL coalescing ruleJohannes Berg
[ Upstream commit 801ea33ae82d6a9d954074fbcf8ea9d18f1543a7 ] If the parsing fails, we can dereference a NULL pointer here. Cc: stable@vger.kernel.org Fixes: be29b99a9b51 ("cfg80211/nl80211: Add packet coalesce support") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240418105220.b328f80406e7.Id75d961050deb05b3e4e354e024866f350c68103@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-13wifi: cfg80211: check A-MSDU format more carefullyJohannes Berg
[ Upstream commit 9ad7974856926129f190ffbe3beea78460b3b7cc ] If it looks like there's another subframe in the A-MSDU but the header isn't fully there, we can end up reading data out of bounds, only to discard later. Make this a bit more careful and check if the subframe header can even be present. Reported-by: syzbot+d050d437fe47d479d210@syzkaller.appspotmail.com Link: https://msgid.link/20240226203405.a731e2c95e38.I82ce7d8c0cc8970ce29d0a39fdc07f1ffc425be4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-03wifi: cfg80211: add a flag to disable wireless extensionsJohannes Berg
commit be23b2d7c3b7c8bf57b1cf0bf890bd65df9d0186 upstream. Wireless extensions are already disabled if MLO is enabled, given that we cannot support MLO there with all the hard- coded assumptions about BSSID etc. However, the WiFi7 ecosystem is still stabilizing, and some devices may need MLO disabled while that happens. In that case, we might end up with a device that supports wext (but not MLO) in one kernel, and then breaks wext in the future (by enabling MLO), which is not desirable. Add a flag to let such drivers/devices disable wext even if MLO isn't yet enabled. Cc: stable@vger.kernel.org Link: https://msgid.link/20240314110951.b50f1dc4ec21.I656ddd8178eedb49dc5c6c0e70f8ce5807afb54f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-06wifi: nl80211: reject iftype change with mesh ID changeJohannes Berg
commit f78c1375339a291cba492a70eaf12ec501d28a8e upstream. It's currently possible to change the mesh ID when the interface isn't yet in mesh mode, at the same time as changing it into mesh mode. This leads to an overwrite of data in the wdev->u union for the interface type it currently has, causing cfg80211_change_iface() to do wrong things when switching. We could probably allow setting an interface to mesh while setting the mesh ID at the same time by doing a different order of operations here, but realistically there's no userspace that's going to do this, so just disallow changes in iftype when setting mesh ID. Cc: stable@vger.kernel.org Fixes: 29cbe68c516a ("cfg80211/mac80211: add mesh join/leave commands") Reported-by: syzbot+dd4779978217b1973180@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01wifi: cfg80211: fix missing interfaces when dumpingMichal Kazior
[ Upstream commit a6e4f85d3820d00694ed10f581f4c650445dbcda ] The nl80211_dump_interface() supports resumption in case nl80211_send_iface() doesn't have the resources to complete its work. The logic would store the progress as iteration offsets for rdev and wdev loops. However the logic did not properly handle resumption for non-last rdev. Assuming a system with 2 rdevs, with 2 wdevs each, this could happen: dump(cb=[0, 0]): if_start=cb[1] (=0) send rdev0.wdev0 -> ok send rdev0.wdev1 -> yield cb[1] = 1 dump(cb=[0, 1]): if_start=cb[1] (=1) send rdev0.wdev1 -> ok // since if_start=1 the rdev0.wdev0 got skipped // through if_idx < if_start send rdev1.wdev1 -> ok The if_start needs to be reset back to 0 upon wdev loop end. The problem is actually hard to hit on a desktop, and even on most routers. The prerequisites for this manifesting was: - more than 1 wiphy - a few handful of interfaces - dump without rdev or wdev filter I was seeing this with 4 wiphys 9 interfaces each. It'd miss 6 interfaces from the last wiphy reported to userspace. Signed-off-by: Michal Kazior <michal@plume.com> Link: https://msgid.link/20240116142340.89678-1-kazikcz@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23wifi: cfg80211: fix wiphy delayed work queueingJohannes Berg
commit b743287d7a0007493f5cada34ed2085d475050b4 upstream. When a wiphy work is queued with timer, and then again without a delay, it's started immediately but *also* started again after the timer expires. This can lead, for example, to warnings in mac80211's offchannel code as reported by Jouni. Running the same work twice isn't expected, of course. Fix this by deleting the timer at this point, when queuing immediately due to delay=0. Cc: stable@vger.kernel.org Reported-by: Jouni Malinen <j@w1.fi> Fixes: a3ee4dc84c4e ("wifi: cfg80211: add a work abstraction with special semantics") Link: https://msgid.link/20240125095108.2feb0eaaa446.I4617f3210ed0e7f252290d5970dac6a876aa595b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-05wifi: cfg80211: fix RCU dereference in __cfg80211_bss_updateEdward Adam Davis
[ Upstream commit 1184950e341c11b6f82bc5b59564411d9537ab27 ] Replace rcu_dereference() with rcu_access_pointer() since we hold the lock here (and aren't in an RCU critical section). Fixes: 32af9a9e1069 ("wifi: cfg80211: free beacon_ies when overridden from hidden BSS") Reported-and-tested-by: syzbot+864a269c27ee06b58374@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Link: https://msgid.link/tencent_BF8F0DF0258C8DBF124CDDE4DD8D992DCF07@qq.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05wifi: cfg80211: free beacon_ies when overridden from hidden BSSBenjamin Berg
[ Upstream commit 32af9a9e1069e55bc02741fb00ac9d0ca1a2eaef ] This is a more of a cosmetic fix. The branch will only be taken if proberesp_ies is set, which implies that beacon_ies is not set unless we are connected to an AP that just did a channel switch. And, in that case we should have found the BSS in the internal storage to begin with. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231220133549.b898e22dadff.Id8c4c10aedd176ef2e18a4cad747b299f150f9df@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25wifi: cfg80211: parse all ML elements in an ML probe responseBenjamin Berg
[ Upstream commit d18125b640309e925441ce49559be33867ae6b29 ] A probe response from a transmitting AP in an Multi-BSSID setup will contain more than one Multi-Link element. Most likely, only one of these elements contains per-STA profiles. Fixes: 2481b5da9c6b ("wifi: cfg80211: handle BSS data contained in ML probe responses") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240102213313.6635eb152735.I94289002d4a2f7b6b44dfa428344854e37b0b29c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25wifi: cfg80211: correct comment about MLD IDBenjamin Berg
[ Upstream commit 2a0698f86d4dfc43cc0c1703efb7ba6b1506a4e2 ] The comment was referencing the wrong section of the documentation and was also subtly wrong as it assumed the rules that apply when sending probe requests directly to a nontransmitted AP. However, in that case the response comes from the transmitting AP and the AP MLD ID will be included. Fixes: 2481b5da9c6b ("wifi: cfg80211: handle BSS data contained in ML probe responses") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240102213313.0917ab4b5d7f.I76aff0e261a5de44ffb467e591a46597a30d7c0a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-20wifi: cfg80211: lock wiphy mutex for rfkill pollJohannes Berg
[ Upstream commit 8e2f6f2366219b3304b227bdd2f04b64c92e3e12 ] We want to guarantee the mutex is held for pretty much all operations, so ensure that here as well. Reported-by: syzbot+7e59a5bfc7a897247e18@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-05wifi: nl80211: fix deadlock in nl80211_set_cqm_rssi (6.6.x)Léo Lam
Commit 008afb9f3d57 ("wifi: cfg80211: fix CQM for non-range use" backported to 6.6.x) causes nl80211_set_cqm_rssi not to release the wdev lock in some of the error paths. Of course, the ensuing deadlock causes userland network managers to break pretty badly, and on typical systems this also causes lockups on on suspend, poweroff and reboot. See [1], [2], [3] for example reports. The upstream commit 7e7efdda6adb ("wifi: cfg80211: fix CQM for non-range use"), committed in November 2023, is completely fine because there was another commit in August 2023 that removed the wdev lock: see commit 076fc8775daf ("wifi: cfg80211: remove wdev mutex"). The reason things broke in 6.6.5 is that commit 4338058f6009 was applied without also applying 076fc8775daf. Commit 076fc8775daf ("wifi: cfg80211: remove wdev mutex") is a rather large commit; adjusting the error handling (which is what this commit does) yields a much simpler patch and was tested to work properly. Fix the deadlock by releasing the lock before returning. [1] https://bugzilla.kernel.org/show_bug.cgi?id=218247 [2] https://bbs.archlinux.org/viewtopic.php?id=290976 [3] https://lore.kernel.org/all/87sf4belmm.fsf@turtle.gmx.de/ Link: https://lore.kernel.org/stable/e374bb16-5b13-44cc-b11a-2f4eefb1ecf5@manjaro.org/ Fixes: 008afb9f3d57 ("wifi: cfg80211: fix CQM for non-range use") Tested-by: "Léo Lam" <leo@leolam.fr> Tested-by: Philip Müller <philm@manjaro.org> Cc: stable@vger.kernel.org Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: "Léo Lam" <leo@leolam.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-05wifi: cfg80211: fix CQM for non-range useJohannes Berg
commit 7e7efdda6adb385fbdfd6f819d76bc68c923c394 upstream. [note: this is commit 4a7e92551618f3737b305f62451353ee05662f57 reapplied; that commit had been reverted in 6.6.6 because it caused regressions, see https://lore.kernel.org/stable/2023121450-habitual-transpose-68a1@gregkh/ for details] My prior race fix here broke CQM when ranges aren't used, as the reporting worker now requires the cqm_config to be set in the wdev, but isn't set when there's no range configured. Rather than continuing to special-case the range version, set the cqm_config always and configure accordingly, also tracking if range was used or not to be able to clear the configuration appropriately with the same API, which was actually not right if both were implemented by a driver for some reason, as is the case with mac80211 (though there the implementations are equivalent so it doesn't matter.) Also, the original multiple-RSSI commit lost checking for the callback, so might have potentially crashed if a driver had neither implementation, and userspace tried to use it despite not being advertised as supported. Cc: stable@vger.kernel.org Fixes: 4a4b8169501b ("cfg80211: Accept multiple RSSI thresholds for CQM") Fixes: 37c20b2effe9 ("wifi: cfg80211: fix cqm_config access race") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: "Léo Lam" <leo@leolam.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-01wifi: cfg80211: fix certs build to not depend on file orderJohannes Berg
commit 3c2a8ebe3fe66a5f77d4c164a0bea8e2ff37b455 upstream. The file for the new certificate (Chen-Yu Tsai's) didn't end with a comma, so depending on the file order in the build rule, we'd end up with invalid C when concatenating the (now two) certificates. Fix that. Cc: stable@vger.kernel.org Reported-by: Biju Das <biju.das.jz@bp.renesas.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: fb768d3b13ff ("wifi: cfg80211: Add my certificate") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-01wifi: cfg80211: Add my certificateChen-Yu Tsai
commit fb768d3b13ffa325b7e84480d488ac799c9d2cd7 upstream. As announced [1][2], I have taken over maintainership of the wireless-regdb project. Add my certificate so that newer releases are valid to the kernel. Seth's certificate should be kept around for awhile, at least until a few new releases by me happen. This should also be applied to stable trees so that stable kernels can utilize newly released database binaries. [1] https://lore.kernel.org/linux-wireless/CAGb2v657baNMPKU3QADijx7hZa=GUcSv2LEDdn6N=QQaFX8r-g@mail.gmail.com/ [2] https://lore.kernel.org/linux-wireless/ZWmRR5ul7EDfxCan@wens.tw/ Cc: stable@vger.kernel.org Signed-off-by: Chen-Yu Tsai <wens@kernel.org> Acked-by: Seth Forshee <sforshee@kernel.org> Link: https://msgid.link/ZXHGsqs34qZyzZng@wens.tw Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-11Revert "wifi: cfg80211: fix CQM for non-range use"Greg Kroah-Hartman
This reverts commit 4a7e92551618f3737b305f62451353ee05662f57 which is commit 7e7efdda6adb385fbdfd6f819d76bc68c923c394 upstream. It needed to have commit 076fc8775daf ("wifi: cfg80211: remove wdev mutex") applied to properly work, otherwise regressions happen. Link: https://lore.kernel.org/r/e374bb16-5b13-44cc-b11a-2f4eefb1ecf5@manjaro.org Link: https://lore.kernel.org/r/87sf4belmm.fsf@turtle.gmx.de Link: https://lore.kernel.org/r/20231210213930.61378-1-leo@leolam.fr Reported-by: Léo Lam <leo@leolam.fr> Reported-by: Sven Joachim <svenjoac@gmx.de> Reported-by: Philip Müller <philm@manjaro.org> Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08wifi: cfg80211: fix CQM for non-range useJohannes Berg
commit 7e7efdda6adb385fbdfd6f819d76bc68c923c394 upstream. My prior race fix here broke CQM when ranges aren't used, as the reporting worker now requires the cqm_config to be set in the wdev, but isn't set when there's no range configured. Rather than continuing to special-case the range version, set the cqm_config always and configure accordingly, also tracking if range was used or not to be able to clear the configuration appropriately with the same API, which was actually not right if both were implemented by a driver for some reason, as is the case with mac80211 (though there the implementations are equivalent so it doesn't matter.) Also, the original multiple-RSSI commit lost checking for the callback, so might have potentially crashed if a driver had neither implementation, and userspace tried to use it despite not being advertised as supported. Cc: stable@vger.kernel.org Fixes: 4a4b8169501b ("cfg80211: Accept multiple RSSI thresholds for CQM") Fixes: 37c20b2effe9 ("wifi: cfg80211: fix cqm_config access race") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-20wifi: cfg80211: fix off-by-one in element defragJohannes Berg
[ Upstream commit 43125539fc69c6aa63d34b516939431391bddeac ] If a fragment is the last element, it's erroneously not accepted. Fix that. Fixes: f837a653a097 ("wifi: cfg80211: add element defragmentation helper") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230827135854.adca9fbd3317.I6b2df45eb71513f3e48efd196ae3cddec362dc1c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20wifi: cfg80211: add flush functions for wiphy workJohannes Berg
[ Upstream commit 56cfb8ce1f7f6c4e5ca571a2ec0880e131cd0311 ] There may be sometimes reasons to actually run the work if it's pending, add flush functions for both regular and delayed wiphy work that will do this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Stable-dep-of: eadfb54756ae ("wifi: mac80211: move sched-scan stop work to wiphy work") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-23wifi: cfg80211: fix assoc response warning on failed linksJohannes Berg
The warning here shouldn't be done before we even set the bss field (or should've used the input data). Move the assignment before the warning to fix it. We noticed this now because of Wen's bugfix, where the bug fixed there had previously hidden this other bug. Fixes: 53ad07e9823b ("wifi: cfg80211: support reporting failed links") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: cfg80211: pass correct pointer to rdev_inform_bss()Ben Greear
Confusing struct member names here resulted in passing the wrong pointer, causing crashes. Pass the correct one. Fixes: eb142608e2c4 ("wifi: cfg80211: use a struct for inform_single_bss data") Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20231021154827.1142734-1-greearb@candelatech.com [rewrite commit message, add fixes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-11wifi: cfg80211: use system_unbound_wq for wiphy workJohannes Berg
Since wiphy work items can run pretty much arbitrary code in the stack/driver, it can take longer to run all of this, so we shouldn't be using system_wq via schedule_work(). Also, we lock the wiphy (which is the reason this exists), so use system_unbound_wq. Reported-and-tested-by: Kalle Valo <kvalo@kernel.org> Fixes: a3ee4dc84c4e ("wifi: cfg80211: add a work abstraction with special semantics") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-26wifi: cfg80211: avoid leaking stack data into traceBenjamin Berg
If the structure is not initialized then boolean types might be copied into the tracing data without being initialised. This causes data from the stack to leak into the trace and also triggers a UBSAN failure which can easily be avoided here. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Link: https://lore.kernel.org/r/20230925171855.a9271ef53b05.I8180bae663984c91a3e036b87f36a640ba409817@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-25wifi: cfg80211: Fix 6GHz scan configurationIlan Peer
When the scan request includes a non broadcast BSSID, when adding the scan parameters for 6GHz collocated scanning, do not include entries that do not match the given BSSID. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230918140607.6d31d2a96baf.I6c4e3e3075d1d1878ee41f45190fdc6b86f18708@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: cfg80211: fix cqm_config access raceJohannes Berg
Max Schulze reports crashes with brcmfmac. The reason seems to be a race between userspace removing the CQM config and the driver calling cfg80211_cqm_rssi_notify(), where if the data is freed while cfg80211_cqm_rssi_notify() runs it will crash since it assumes wdev->cqm_config is set. This can't be fixed with a simple non-NULL check since there's nothing we can do for locking easily, so use RCU instead to protect the pointer, but that requires pulling the updates out into an asynchronous worker so they can sleep and call back into the driver. Since we need to change the free anyway, also change it to go back to the old settings if changing the settings fails. Reported-and-tested-by: Max Schulze <max.schulze@online.de> Closes: https://lore.kernel.org/r/ac96309a-8d8d-4435-36e6-6d152eb31876@online.de Fixes: 4a4b8169501b ("cfg80211: Accept multiple RSSI thresholds for CQM") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: cfg80211: validate AP phy operation before starting itAditya Kumar Singh
Many regulatories can have HE/EHT Operation as not permitted. In such cases, AP should not be allowed to start if it is using a channel having the no operation flag set. However, currently there is no such check in place. Fix this issue by validating such IEs sent during start AP against the channel flags. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20230905064857.1503-1-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: cfg80211/mac80211: hold link BSSes when assoc fails for MLO connectionWen Gong
When connect to MLO AP with more than one link, and the assoc response of AP is not success, then cfg80211_unhold_bss() is not called for all the links' cfg80211_bss except the primary link which means the link used by the latest successful association request. Thus the hold value of the cfg80211_bss is not reset to 0 after the assoc fail, and then the __cfg80211_unlink_bss() will not be called for the cfg80211_bss by __cfg80211_bss_expire(). Then the AP always looks exist even the AP is shutdown or reconfigured to another type, then it will lead error while connecting it again. The detail info are as below. When connect with muti-links AP, cfg80211_hold_bss() is called by cfg80211_mlme_assoc() for each cfg80211_bss of all the links. When assoc response from AP is not success(such as status_code==1), the ieee80211_link_data of non-primary link(sdata->link[link_id]) is NULL because ieee80211_assoc_success()->ieee80211_vif_update_links() is not called for the links. Then struct cfg80211_rx_assoc_resp resp in cfg80211_rx_assoc_resp() and struct cfg80211_connect_resp_params cr in __cfg80211_connect_result() will only have the data of the primary link, and finally function cfg80211_connect_result_release_bsses() only call cfg80211_unhold_bss() for the primary link. Then cfg80211_bss of the other links will never free because its hold is always > 0 now. Hence assign value for the bss and status from assoc_data since it is valid for this case. Also assign value of addr from assoc_data when the link is NULL because the addrs of assoc_data and link both represent the local link addr and they are same value for success connection. Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link") Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Link: https://lore.kernel.org/r/20230825070055.28164-1-quic_wgong@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-08-22wifi: nl80211: Remove unused declaration nl80211_pmsr_dump_results()Yue Haibing
nl80211_pmsr_dump_results() is never implemented since it was added in commit 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API"). Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230729121651.36836-1-yuehaibing@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-08-22wifi: nl80211/cfg80211: add forgotten nla_policy for BSS color attributeLin Ma
The previous commit dd3e4fc75b4a ("nl80211/cfg80211: add BSS color to NDP ranging parameters") adds a parameter for NDP ranging by introducing a new attribute type named NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR. However, the author forgot to also describe the nla_policy at nl80211_pmsr_ftm_req_attr_policy (net/wireless/nl80211.c). Just complement it to avoid malformed attribute that causes out-of-attribute access. Fixes: dd3e4fc75b4a ("nl80211/cfg80211: add BSS color to NDP ranging parameters") Signed-off-by: Lin Ma <linma@zju.edu.cn> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230809033151.768910-1-linma@zju.edu.cn Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-08-22wifi: cfg80211: ocb: don't leave if not joinedJohannes Berg
If there's no OCB state, don't ask the driver/mac80211 to leave, since that's just confusing. Since set/clear the chandef state, that's a simple check. Reported-by: syzbot+09d1cd2f71e6dd3bfd2c@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-08-22wifi: cfg80211: reject auth/assoc to AP with our addressJohannes Berg
If the AP uses our own address as its MLD address or BSSID, then clearly something's wrong. Reject such connections so we don't try and fail later. Reported-by: syzbot+2676771ed06a6df166ad@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-08-22wifi: cfg80211: Annotate struct cfg80211_rnr_elems with __counted_byKees Cook
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct cfg80211_rnr_elems. Additionally, since the element count member must be set before accessing the annotated flexible array member, move its initialization earlier. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20230817211531.4193219-5-keescook@chromium.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-08-22wifi: cfg80211: Annotate struct cfg80211_pmsr_request with __counted_byKees Cook
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct cfg80211_pmsr_request. Additionally, since the element count member must be set before accessing the annotated flexible array member, move its initialization earlier. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20230817211531.4193219-4-keescook@chromium.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 18:12:30 +0000