summaryrefslogtreecommitdiff
path: root/net/wireless/nl80211.c
AgeCommit message (Collapse)Author
2023-03-10wifi: cfg80211: fix MLO connection ownershipJohannes Berg
When disconnecting from an MLO connection we need the AP MLD address, not an arbitrary BSSID. Fix the code to do that. Fixes: 9ecff10e82a5 ("wifi: nl80211: refactor BSS lookup in nl80211_associate()") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.4c1b3b18980e.I008f070c7f3b8e8bde9278101ef9e40706a82902@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-10wifi: nl80211: fix puncturing bitmap policyJohannes Berg
This was meant to be a u32, and while applying the patch I tried to use policy validation for it. However, not only did I copy/paste it to u8 instead of u32, but also used the policy range erroneously. Fix both of these issues. Fixes: d7c1a9a0ed18 ("wifi: nl80211: validate and configure puncturing bitmap") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-10wifi: nl80211: fix NULL-ptr deref in offchan checkJohannes Berg
If, e.g. in AP mode, the link was already created by userspace but not activated yet, it has a chandef but the chandef isn't valid and has no channel. Check for this and ignore this link. Fixes: 7b0a0e3c3a88 ("wifi: cfg80211: do some rework towards MLO link APIs") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.71bd4803fbb9.Iee39c0f6c2d3a59a8227674dc55d52e38b1090cf@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: nl80211: convert cfg80211_scan_request allocation to *_size macrosJacob Keller
The cfg80211_scan_request structure is followed by a flexible array member as well as several other arrays that are then stored into pointers in the structure. These are allocated currently using a simple sequence of multiplications. Replace the calculations with struct_size(), size_add(), and array_size() helper macros. These macros saturate the calculation at SIZE_MAX rather than overflowing. Note that we can't use flex_array_size() instead of array_size() because the fields are not arrays, but simple pointers. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20230228162827.3876606-3-jacob.e.keller@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: cfg80211/mac80211: report link ID on control port RXJohannes Berg
For control port RX, report the link ID for MLO. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.fe06dfc3791b.Iddcab94789cafe336417be406072ce8a6312fc2d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: nl80211: add a command to enable/disable HW timestampingAvraham Stern
Add a command to enable and disable HW timestamping of TM and FTM frames. HW timestamping can be enabled for a specific mac address or for all addresses. The low level driver will indicate how many peers HW timestamping can be enabled concurrently, and this information will be passed to userspace. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.05678d7b1c17.Iccc08869ea8156f1c71a3111a47f86dd56234bd0@changeid [switch to needing netdev UP, minor edits] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: get rid of gfp in cfg80211_bss_color_notifyLorenzo Bianconi
Since cfg80211_bss_color_notify() is now always run in non-atomic context, get rid of gfp_t flags in the routine signature and always use GFP_KERNEL for netlink message allocation. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/c687724e7b53556f7a2d9cbe3d11cdcf065cb687.1675255390.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: nl80211: Allow authentication frames and set keys on NAN interfaceVinay Gannevaram
Wi-Fi Aware R4 specification defines NAN Pairing which uses PASN handshake to authenticate the peer and generate keys. Hence allow to register and transmit the PASN authentication frames on NAN interface and set the keys to driver or underlying modules on NAN interface. The driver needs to configure the feature flag NL80211_EXT_FEATURE_SECURE_NAN, which also helps userspace modules to know if the driver supports secure NAN. Signed-off-by: Vinay Gannevaram <quic_vganneva@quicinc.com> Link: https://lore.kernel.org/r/1675519179-24174-1-git-send-email-quic_vganneva@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: include puncturing bitmap in channel switch eventsAloka Dixit
Add puncturing bitmap in channel switch notifications and corresponding trace functions. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Link: https://lore.kernel.org/r/20230131001227.25014-4-quic_alokad@quicinc.com [fix qtnfmac] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: nl80211: validate and configure puncturing bitmapAloka Dixit
- New feature flag, NL80211_EXT_FEATURE_PUNCT, to advertise driver support for preamble puncturing in AP mode. - New attribute, NL80211_ATTR_PUNCT_BITMAP, to receive a puncturing bitmap from the userspace during AP bring up (NL80211_CMD_START_AP) and channel switch (NL80211_CMD_CHANNEL_SWITCH) operations. Each bit corresponds to a 20 MHz channel in the operating bandwidth, lowest bit for the lowest channel. Bit set to 1 indicates that the channel is punctured. Higher 16 bits are reserved. - New members added to structures cfg80211_ap_settings and cfg80211_csa_settings to propagate the bitmap to the driver after validation. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Link: https://lore.kernel.org/r/20230131001227.25014-3-quic_alokad@quicinc.com [move validation against 0xffff into policy] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: nl80211: return error message for malformed chandefJaewan Kim
Add an error message to the missing frequency case to have all -EINVAL in nl80211_parse_chandef() return a better error. Signed-off-by: Jaewan Kim <jaewan@google.com> Link: https://lore.kernel.org/r/20230130074514.1560021-1-jaewan@google.com [rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: nl80211: add MLO_LINK_ID to CMD_STOP_AP eventAlvin Šipraga
nl80211_send_ap_stopped() can be called multiple times on the same netdev for each link when using Multi-Link Operation. Add the MLO_LINK_ID attribute to the event to allow userspace to distinguish which link the event is for. Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Link: https://lore.kernel.org/r/20230128125844.2407135-2-alvin@pqrs.dk Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: nl80211: emit CMD_START_AP on multicast group when an AP is startedAlvin Šipraga
Userspace processes such as network daemons may wish to be informed when any AP interface is brought up on the system, for example to initiate a (re)configuration of IP settings or to start a DHCP server. Currently nl80211 does not broadcast any such event on its multicast groups, leaving userspace only two options: 1. the process must be the one that actually issued the NL80211_CMD_START_AP request, so that it can react on the response to that request; 2. the process must react to RTM_NEWLINK events indicating a change in carrier state, and may query for further information about the AP and react accordingly. Option (1) is robust, but it does not cover all scenarios. It is easy to imagine a situation where this is not the case (e.g. hostapd + systemd-networkd). Option (2) is not robust, because RTM_NEWLINK events may be silently discarded by the linkwatch logic (cf. linkwatch_fire_event()). Concretely, consider a scenario in which the carrier state flip-flops in the following way: ^ carrier state (high/low = carrier/no carrier) | | _______ _______ ... | | | | | ______| "foo" |____| "bar" (SSID in "quotes") | +-------A-------B----C---------> time If the time interval between (A) and (C) is less than 1 second, then linkwatch may emit only a single RTM_NEWLINK event indicating carrier gain. This is problematic because it is possible that the network configuration that should be applied is a function of the AP's properties such as SSID (cf. SSID= in systemd.network(5)). As illustrated in the above diagram, it may be that the AP with SSID "bar" ends up being configured as though it had SSID "foo". Address the above issue by having nl80211 emit an NL80211_CMD_START_AP message on the MLME nl80211 multicast group. This allows for arbitrary processes to be reliably informed. Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Link: https://lore.kernel.org/r/20230128125844.2407135-1-alvin@pqrs.dk Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: Extend cfg80211_update_owe_info_event() for MLD APVeerendranath Jakkam
Add support to offload OWE processing to user space for MLD AP when driver's SME in use. Add new parameters in struct cfg80211_update_owe_info to provide below information in cfg80211_update_owe_info_event() call: - MLO link ID of the AP, with which station requested (re)association. This is applicable for both MLO and non-MLO station connections when the AP affiliated with an MLD. - Station's MLD address if the connection is MLO capable. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230126143256.960563-3-quic_vjakkam@quicinc.com [reformat the trace event macro] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: Extend cfg80211_new_sta() for MLD APVeerendranath Jakkam
Add support for drivers to indicate STA connection(MLO/non-MLO) when user space SME (e.g., hostapd) is not used for MLD AP. Add new parameters in struct station_info to provide below information in cfg80211_new_sta() call: - MLO link ID of the AP, with which station completed (re)association. This is applicable for both MLO and non-MLO station connections when the AP affiliated with an MLD. - Station's MLD address if the connection is MLO capable. - (Re)Association Response IEs sent to the station. User space needs this to determine rejected and accepted affiliated links information of the connected station if the connection is MLO capable. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230126143256.960563-2-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: Authentication offload to user space for MLO connection in ↵Veerendranath Jakkam
STA mode Currently authentication request event interface doesn't have support to indicate the user space whether it should enable MLO or not during the authentication with the specified AP. But driver needs such capability since the connection is MLO or not decided by the driver in case of SME offload to the driver. Add support for driver to indicate MLD address of the AP in authentication offload request to inform user space to enable MLO during authentication process. Driver shall look at NL80211_ATTR_MLO_SUPPORT flag capability in NL80211_CMD_CONNECT to know whether the user space supports enabling MLO during the authentication offload. User space should enable MLO during the authentication only when it receives the AP MLD address in authentication offload request. User space shouldn't enable MLO if the authentication offload request doesn't indicate the AP MLD address even if the AP is MLO capable. When MLO is enabled, user space should use the MAC address of the interface (on which driver sent request) as self MLD address. User space and driver to use MLD addresses in RA, TA and BSSID fields of the frames between them, and driver translates the MLD addresses to/from link addresses based on the link chosen for the authentication. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230116125058.1604843-1-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-18wifi: cfg80211: Support 32 bytes KCK key in GTK rekey offloadShivani Baranwal
Currently, maximum KCK key length supported for GTK rekey offload is 24 bytes but with some newer AKMs the KCK key length can be 32 bytes. e.g., 00-0F-AC:24 AKM suite with SAE finite cyclic group 21. Add support to allow 32 bytes KCK keys in GTK rekey offload. Signed-off-by: Shivani Baranwal <quic_shivbara@quicinc.com> Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20221206143715.1802987-3-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-18wifi: cfg80211: Fix extended KCK key length check in nl80211_set_rekey_data()Shivani Baranwal
The extended KCK key length check wrongly using the KEK key attribute for validation. Due to this GTK rekey offload is failing when the KCK key length is 24 bytes even though the driver advertising WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK flag. Use correct attribute to fix the same. Fixes: 093a48d2aa4b ("cfg80211: support bigger kek/kck key length") Signed-off-by: Shivani Baranwal <quic_shivbara@quicinc.com> Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20221206143715.1802987-2-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-12-01wifi: nl80211: Add checks for nla_nest_start() in nl80211_send_iface()Yuan Can
As the nla_nest_start() may fail with NULL returned, the return value needs to be checked. Fixes: ce08cd344a00 ("wifi: nl80211: expose link information for interfaces") Signed-off-by: Yuan Can <yuancan@huawei.com> Link: https://lore.kernel.org/r/20221129014211.56558-1-yuancan@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-11-07genetlink: introduce split op representationJakub Kicinski
We currently have two forms of operations - small ops and "full" ops (or just ops). The former does not have pointers for some of the less commonly used features (namely dump start/done and policy). The "full" ops, however, still don't contain all the necessary information. In particular the policy is per command ID, while do and dump often accept different attributes. It's also not possible to define different pre_doit and post_doit callbacks for different commands within the family. At the same time a lot of commands do not support dumping and therefore all the dump-related information is wasted space. Create a new command representation which can hold info about a do implementation or a dump implementation, but not both at the same time. Use this new representation on the command execution path (genl_family_rcv_msg) as we either run a do or a dump and don't have to create a "full" op there. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-10Merge remote-tracking branch 'wireless/main' into wireless-nextJohannes Berg
Pull in wireless/main content since some new code would otherwise conflict with it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07cfg80211: Update Transition Disable policy during port authorizationVinayak Yadawad
In case of 4way handshake offload, transition disable policy updated by the AP during EAPOL 3/4 is not updated to the upper layer. This results in mismatch between transition disable policy between the upper layer and the driver. This patch addresses this issue by updating transition disable policy as part of port authorization indication. Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: nl80211: use link ID in NL80211_CMD_SET_BSSJohannes Berg
We clearly need the link ID here, to know the right BSS to configure. Use/require it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: cfg80211: support reporting failed linksJohannes Berg
For assoc and connect result APIs, support reporting failed links; they should still come with the BSS pointer in the case of assoc, so they're released correctly. In the case of connect result, this is optional. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: nl80211: Split memcpy() of struct nl80211_wowlan_tcp_data_token ↵Kees Cook
flexible array To work around a misbehavior of the compiler's ability to see into composite flexible array structs (as detailed in the coming memcpy() hardening series[1]), split the memcpy() of the header and the payload so no false positive run-time overflow warning will be generated. [1] https://lore.kernel.org/linux-hardening/20220901065914.1417829-2-keescook@chromium.org/ Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-04Merge tag 'wireless-next-2022-09-03' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== drivers - rtw89: large update across the map, e.g. coex, pci(e), etc. - ath9k: uninit memory read fix - ath10k: small peer map fix and a WCN3990 device fix - wfx: underflow stack - the "change MAC address while IFF_UP" change from James we discussed - more MLO work, including a set of fixes for the previous code, now that we have more code we can exercise it more - prevent some features with MLO that aren't ready yet (AP_VLAN and 4-address connections) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03wifi: nl80211: add MLD address to assoc BSS entriesJohannes Berg
Add an MLD address attribute to BSS entries that the interface is currently associated with to help userspace figure out what's going on. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: nl80211: remove redundant err variableJinpeng Cui
Return value from rdev_set_mcast_rate() directly instead of taking this in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-29genetlink: start to validate reserved header bytesJakub Kicinski
We had historically not checked that genlmsghdr.reserved is 0 on input which prevents us from using those precious bytes in the future. One use case would be to extend the cmd field, which is currently just 8 bits wide and 256 is not a lot of commands for some core families. To make sure that new families do the right thing by default put the onus of opting out of validation on existing families. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Paul Moore <paul@paul-moore.com> (NetLabel) Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-25wifi: cfg80211: Add link_id to cfg80211_ch_switch_started_notify()Veerendranath Jakkam
Add link_id parameter to cfg80211_ch_switch_started_notify() to allow driver to indicate on which link channel switch started on MLD. Send the data to userspace so it knows as well. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20220722131143.3438042-1-quic_vjakkam@quicinc.com Link: https://lore.kernel.org/r/20220722131143.3438042-2-quic_vjakkam@quicinc.com [squash two patches] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: nl80211: send MLO links channel info in GET_INTERFACEVeerendranath Jakkam
Currently, MLO link level channel information not sent to userspace when NL80211_CMD_GET_INTERFACE requested on MLD. Add support to send channel information for all valid links for NL80211_CMD_GET_INTERFACE request. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20220722131000.3437894-1-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: cfg80211/mac80211: check EHT capability size correctlyJohannes Berg
For AP/non-AP the EHT MCS/NSS subfield size differs, the 4-octet subfield is only used for 20 MHz-only non-AP STA. Pass an argument around everywhere to be able to parse it properly. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: cfg80211: Add link_id parameter to various key operations for MLOVeerendranath Jakkam
Add support for various key operations on MLD by adding new parameter link_id. Pass the link_id received from userspace to driver for add_key, get_key, del_key, set_default_key, set_default_mgmt_key and set_default_beacon_key to support configuring keys specific to each MLO link. Userspace must not specify link ID for MLO pairwise key since it is common for all the MLO links. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20220730052643.1959111-4-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: cfg80211: add link id to txq paramsShaul Triebitz
The Tx queue parameters are per link, so add the link ID from nl80211 parameters to the API. While at it, lock the wdev when calling into the driver so it (and we) can check the link ID appropriately. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: nl80211: add MLO link ID to the NL80211_CMD_FRAME TX APIJohannes Berg
Allow optionally specifying the link ID to transmit on, which can be done instead of the link frequency, on an MLD addressed frame. Both can also be omitted in which case the frame must be MLD addressed and link selection (and address translation) will be done on lower layers. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: cfg80211: report link ID in NL80211_CMD_FRAMEJohannes Berg
If given by the underlying driver, report the link ID for MLO in NL80211_CMD_FRAME. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: cfg80211: add hardware timestamps to frame RX infoAvraham Stern
Add hardware timestamps to management frame RX info. This shall be used by drivers that support hardware timestamping for Timing measurement and Fine timing measurement action frames RX. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: cfg80211/nl80211: move rx management data into a structAvraham Stern
The functions for reporting rx management take many arguments. Collect all the arguments into a struct, which also make it easier to add more arguments if needed. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: cfg80211: add a function for reporting TX status with hardware timestampsAvraham Stern
Add a function for reporting TX status with hardware timestamps. This function shall be used for reporting the TX status of Timing measurement and Fine timing measurement action frames by devices that support reporting hardware timestamps. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: nl80211: require MLD address on link STA add/modifyJohannes Berg
We always need the MLD address and link ID to add or modify the link STA, so require it in the API. Fixes: 577e5b8c3924 ("wifi: cfg80211: add API to add/modify/remove a link station") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: nl80211: fix some attribute policy entriesJohannes Berg
The new NL80211_CMD_ADD_LINK_STA and NL80211_CMD_MODIFY_LINK_STA commands have strict policy validation, so fix the policy so it can be validated correctly. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: nl80211: reject fragmented and non-inheritance elementsJohannes Berg
The underlying mac80211 code cannot deal with fragmented elements for purposes of sorting the elements into the association frame, so reject those inside the link. We might want to reject them inside the assoc frame, but they're used today for FILS, so cannot do that. The non-inheritance element inside the links similarly cannot be handled by mac80211, and outside the links it makes no sense. Reject both since using them could lead to an incorrect implementation. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: nl80211: reject link specific elements on assoc linkJohannes Berg
When we associate, we'll include all the elements for the link we're sending the association request on in the frame and the specific ones for other links in the multi-link element container. Prohibit adding link-specific elements for the association link. Fixes: d648c23024bd ("wifi: nl80211: support MLO in auth/assoc") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: nl80211: advertise MLO supportJohannes Berg
At least while we don't have any more specific interface combinations support, add a simple flag for MLO support, we can keep this later based on something other than the wiphy flag. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: nl80211: allow link ID in set_wiphy with frequencyIlan Peer
This simplifies hostapd implementation, since it didn't switch to NL80211_CMD_SET_CHANNEL. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211/mac80211: Support control port TX from specific linkAndrei Otcheretianski
In case of authentication with a legacy station, link addressed EAPOL frames should be sent. Support it. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: nl80211: Support MLD parameters in nl80211_set_station()Andrei Otcheretianski
Set the MLD parameters in NL80211_CMD_SET_STATION handling to be able to change an MLD station. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: nl80211: check MLO support in authenticateJohannes Berg
We should check that MLO connections are supported before attempting to authenticate with MLO parameters, check that. Fixes: d648c23024bd ("wifi: nl80211: support MLO in auth/assoc") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: nl80211: set BSS to NULL if IS_ERR()Johannes Berg
If the BSS lookup returned an error, set it to NULL so we don't try to free it. Fixes: d648c23024bd ("wifi: nl80211: support MLO in auth/assoc") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: nl80211: add EML/MLD capabilities to per-iftype capabilitiesJohannes Berg
We have the per-interface type capabilities, currently for extended capabilities, add the EML/MLD capabilities there to have this advertised by the driver. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 02:31:07 +0000