summaryrefslogtreecommitdiff
path: root/net/wireless/nl80211.c
AgeCommit message (Collapse)Author
2013-12-03cfg80211: DFS check dfs_region before usageLuis R. Rodriguez
Check the DFS region before channel availability check. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-03nl80211/cfg80211: Set Operating Mode NotificationMarek Kwaczynski
This attribute is needed for setting Operating Mode Notification in AP mode from User Space. This functionality is required when User Space received Assoc Request contains Operation Mode Notification element. Signed-off-by: Marek Kwaczynski <marek.kwaczynski@tieto.com> [fix typos, nl80211 documentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-12-02cfg80211/mac80211/ath6kl: acquire wdev lock outside ch_switch_notifySimon Wunderlich
The channel switch notification should be sent under the wdev/sdata-lock, preferably in the same moment as the channel change happens, to avoid races by other callers (e.g. start/stop_ap). This also adds the previously missing sdata_lock protection in csa_finalize_work. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02cfg80211: protect beacon changing functions with wdev-lockSimon Wunderlich
To avoid race conditions in functions which modify the beacon information, lock these using the wdev lock. This is especially required to avoid problems for csa handling functions which modify beacons but can not be called under rtnl lock. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02cfg80211: aggregate mgmt_tx parameters into a structAndrei Otcheretianski
Change cfg80211 and mac80211 to use cfg80211_mgmt_tx_params struct to aggregate parameters for mgmt_tx functions. This makes the functions' signatures less clumsy and allows less painful parameters extension. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> [fix all other drivers] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02cfg80211: fix reporting 5/10 MHz support to user spaceFelix Fietkau
nla_put_flag needs a real nl80211 attribute id, not a wiphy flag bit. While at it, split 5 and 10 MHz capability flags in case we ever need to support hardware that can only do one of the two. Also move the flag settings to the split-only information so we don't increase the space needed for old userspace. Signed-off-by: Felix Fietkau <nbd@openwrt.org> [change location of flag setting] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: use enum nl80211_dfs_regions for dfs_region everywhereLuis R. Rodriguez
u8 was used in some other places, just stick to the enum, this forces us to express the values that are expected. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: check regulatory request alpha2 earlyLuis R. Rodriguez
Currently nl80211 allows userspace to send the kernel a bogus regulatory domain with at most 32 rules set and it won't reject it until after its allocated memory. Let's be smart about it and take advantage that the last_request is now available under RTNL and check if the alpha2 matches an expected request and reject any bogus userspace requests prior to hitting the memory allocator. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211/mac80211: DFS setup chandef for cac eventJanusz Dziedzic
To report channel width correctly we have to send correct channel parameters from mac80211 when calling cfg80211_cac_event(). This is required in case of using channel width higher than 20MHz and we have to set correct dfs channel state after CAC (NL80211_DFS_AVAILABLE). Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Reviewed-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: don't allow drivers to unset NL80211_FEATURE_SCAN_FLUSHJohannes Berg
As the flag is entirely implemented in cfg80211, it should have been a global feature flag (which I believe didn't exist at the time). However, there's no reason to allow drivers to unset the flag, so don't allow it and remove the validation of NL80211_SCAN_FLAG_FLUSH. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: DFS check chandef usable before CACJanusz Dziedzic
Check chandef we get in CAC request is usable for CAC. All channels have to be DFS channels. Allow DFS_USABLE and DFS_AVAILABLE channels mix. At least one channel has to be DFS_USABLE (require CAC). Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Reviewed-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: consolidate passive-scan and no-ibss flagsLuis R. Rodriguez
These two flags are used for the same purpose, just combine them into a no-ir flag to annotate no initiating radiation is allowed. Old userspace sending either flag will have it treated as the no-ir flag. To be considerate to older userspace we also send both the no-ir flag and the old no-ibss flags. Newer userspace will have to be aware of older kernels. Update all places in the tree using these flags with the following semantic patch: @@ @@ -NL80211_RRF_PASSIVE_SCAN +NL80211_RRF_NO_IR @@ @@ -NL80211_RRF_NO_IBSS +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_PASSIVE_SCAN +IEEE80211_CHAN_NO_IR @@ @@ -IEEE80211_CHAN_NO_IBSS +IEEE80211_CHAN_NO_IR @@ @@ -NL80211_RRF_NO_IR | NL80211_RRF_NO_IR +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_IR +IEEE80211_CHAN_NO_IR @@ @@ -(NL80211_RRF_NO_IR) +NL80211_RRF_NO_IR @@ @@ -(IEEE80211_CHAN_NO_IR) +IEEE80211_CHAN_NO_IR Along with some hand-optimisations in documentation, to remove duplicates and to fix some indentation. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [do all the driver updates in one go] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: ignore supported rates for nonexistant bands on scanFelix Fietkau
Fixes wpa_supplicant p2p_find on 5GHz-only devices Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25nl80211: check nla_nest_start() return valueJohannes Berg
Coverity pointed out that we might dereference NULL later if nla_nest_start() returns a failure. This isn't really true since we'd bomb out before, but we should check the return value directly, so do that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25nl80211: fix error path in nl80211_get_key()Johannes Berg
Coverity pointed out that in the (practically impossible) error case we leak the message - fix this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25nl80211: check nla_put_* return valuesJohannes Berg
Coverity pointed out that in a few functions we don't check the return value of the nla_put_*() calls. Most of these are fairly harmless because the input isn't very dynamic and controlled by the kernel, but the pattern is simply wrong, so fix this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-19genetlink: make multicast groups const, prevent abuseJohannes Berg
Register generic netlink multicast groups as an array with the family and give them contiguous group IDs. Then instead of passing the global group ID to the various functions that send messages, pass the ID relative to the family - for most families that's just 0 because the only have one group. This avoids the list_head and ID in each group, adding a new field for the mcast group ID offset to the family. At the same time, this allows us to prevent abusing groups again like the quota and dropmon code did, since we can now check that a family only uses a group it owns. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19genetlink: pass family to functions using groupsJohannes Berg
This doesn't really change anything, but prepares for the next patch that will change the APIs to pass the group ID within the family, rather than the global group ID. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19genetlink: only pass array to genl_register_family_with_ops()Johannes Berg
As suggested by David Miller, make genl_register_family_with_ops() a macro and pass only the array, evaluating ARRAY_SIZE() in the macro, this is a little safer. The openvswitch has some indirection, assing ops/n_ops directly in that code. This might ultimately just assign the pointers in the family initializations, saving the struct genl_family_and_ops and code (once mcast groups are handled differently.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14genetlink: make all genl_ops users constJohannes Berg
Now that genl_ops are no longer modified in place when registering, they can be made const. This patch was done mostly with spatch: @@ identifier ops; @@ +const struct genl_ops ops[] = { ... }; (except the struct thing in net/openvswitch/datapath.c) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14genetlink: allow making ops constJohannes Berg
Allow making the ops array const by not modifying the ops flags on registration but rather only when ops are sent out in the family information. No users are updated yet except for the pre_doit/post_doit calls in wireless (the only ones that exist now.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-05Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: net/wireless/reg.c
2013-11-04Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/pcie/drv.c
2013-10-28nl80211: fix channel switch parsingAndrei Otcheretianski
The nl80211 attribute NL80211_ATTR_CSA_C_OFF_BEACON should be nested inside NL80211_ATTR_CSA_IES, but commit ee4bc9e75811d2c0cb5f2a2fc5b5 ("nl80211: enable IBSS support for channel switch announcements") added a check in the outer message attributes. Fix channel switch calls by removing the erroneus condition. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> [reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28{nl,cfg,mac}80211: implement mesh channel switch userspace APIChun-Yeow Yeoh
Implement the required procedures for mesh channel switching as defined in the IEEE Std 802.11-2012 section 10.9.8.4.3 and also handle the CSA and MCSP elements as followed: * Add the function for updating the beacon and probe response frames with CSA and MCSP elements during the period of switching to the new channel. Both CSA and MCSP elements must be included in beacon and probe response frames until the intended channel switch time. * The ifmsh->csa_settings is set to NULL and the CSA and MCSP elements will then be removed from the beacon or probe response frames once the new channel is switched to. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28{nl,cfg,mac}80211: enable the triggering of CSA frame in meshChun-Yeow Yeoh
Allow the triggering of CSA frame using mesh interface. The rules are more or less same with IBSS, such as not allowed to change between the band and channel width has to be same from the previous mode. Also, move the ieee80211_send_action_csa to a common space so that it can be re-used by mesh interface. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28nl80211/cfg80211: enable DFS for IBSS modeSimon Wunderlich
To use DFS in IBSS mode, userspace is required to react to radar events. It can inform nl80211 that it is capable of doing so by adding a NL80211_ATTR_HANDLE_DFS attribute when joining the IBSS. This attribute is supplied to let the kernelspace know that the userspace application can and will handle radar events, e.g. by intiating channel switches to a valid channel. DFS channels may only be used if this attribute is supplied and the driver supports it. Driver support will be checked even if a channel without DFS will be initially joined, as a DFS channel may be chosen later. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> [fix attribute name in commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-11cfg80211: pass station supported channel and oper class infoSunil Dutt
The information of the peer's supported channels and supported operating classes are required for the driver to perform TDLS off channel operations. This commit enhances the function nl80211_(new)set_station to pass this information of the peer to the driver. Signed-off-by: Sunil Dutt <c_duttus@qti.qualcomm.com> [return errors for malformed tuples] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-01nl80211: allow CAC only if no operation is going onSimon Wunderlich
A CAC should fail if it is triggered while the interface is already running. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26nl80211: enable IBSS support for channel switch announcementsSimon Wunderlich
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26cfg80211: use the correct macro to check for active monitor supportLuciano Coelho
Use MONITOR_FLAG_ACTIVE, which is a flag mask, instead of NL80211_MNTR_FLAG_ACTIVE, which is a flag index, when checking if the hardware supports active monitoring. Cc: stable@vger.kernel.org Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-28Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-08-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/pcie/trans.c net/mac80211/ibss.c
2013-08-23cfg80211: add flags to cfg80211_rx_mgmt()Vladimir Kondratiev
Add flags intended to report various auxiliary information and introduce the NL80211_RXMGMT_FLAG_ANSWERED flag to report that the frame was already answered by the device. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> [REPLIED->ANSWERED, reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-16Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-08-14nl80211: nl80211hdr_put() doesn't return an ERR_PTRDan Carpenter
There are a few places which check nl80211hdr_put() for an ERR_PTR but actually it returns NULL on error and never error values. In nl80211_testmode_dump() the return wasn't checked at all so I have added one. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> [some whitespace changes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-12cfg80211: add wdev to testmode cmdDavid Spinadel
To allow drivers to implement per-interface testmode operations more easily, pass a wdev pointer if any identification for one was given from userspace. Clean up the code a bit while at it. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-12nl80211: clean up CQM settings codeJohannes Berg
Clean up the CQM settings code a bit and while at it enforce that when setting the threshold to 0 (disable) the hysteresis is also set to 0 to avoid confusion. As we haven't enforce it, simply override userspace. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-09Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-08-09Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2013-08-01Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-08-01nl80211/cfg80211: add channel switch commandSimon Wunderlich
To allow channel switch announcements within beacons, add the channel switch command to nl80211/cfg80211. This is implementation is intended for AP and (later) IBSS mode. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-30nl80211: fix another nl80211_fam.attrbuf raceJohannes Berg
This is similar to the race Linus had reported, but in this case it's an older bug: nl80211_prepare_wdev_dump() uses the wiphy index in cb->args[0] as it is and thus parses the message over and over again instead of just once because 0 is the first valid wiphy index. Similar code in nl80211_testmode_dump() correctly offsets the wiphy_index by 1, do that here as well. Cc: stable@vger.kernel.org Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16nl80211: allow 5 and 10 MHz channels for IBSSSimon Wunderlich
Whether the wiphy supports it or not is already checked, so what is left is to enable these channel types. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16nl80211: add scan width to bss and scan request structsSimon Wunderlich
To allow scanning and working with 5 MHz and 10 MHz BSS, extend the inform bss commands and add wrappers to take 5 and 10 MHz bss into account. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16cfg80211/nl80211: Add packet coalesce supportAmitkumar Karwar
In most cases, host that receives IPv4 and IPv6 multicast/broadcast packets does not do anything with these packets. Therefore the reception of these unwanted packets causes unnecessary processing and power consumption. Packet coalesce feature helps to reduce number of received interrupts to host by buffering these packets in firmware/hardware for some predefined time. Received interrupt will be generated when one of the following events occur. a) Expiration of hardware timer whose expiration time is set to maximum coalescing delay of matching coalesce rule. b) Coalescing buffer in hardware reaches it's limit. c) Packet doesn't match any of the configured coalesce rules. This patch adds set/get configuration support for packet coalesce. User needs to configure following parameters for creating a coalesce rule. a) Maximum coalescing delay b) List of packet patterns which needs to be matched c) Condition for coalescence. pattern 'match' or 'no match' Multiple such rules can be created. This feature needs to be advertised during driver initialization. Drivers are supposed to do required firmware/hardware settings based on user configuration. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> [fix kernel-doc, change free function, fix copy/paste error] Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16nl80211: enable HT overrides for ibssSimon Wunderlich
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16cfg80211/nl80211: rename packet pattern related structures and enumsAmitkumar Karwar
Currently packet patterns and it's enum/structures are used only for WoWLAN feature. As we intend to reuse them for new feature packet coalesce, they are renamed in this patch. Older names are kept for backward compatibility purpose. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16nl80211: fix the setting of RSSI threshold value for meshChun-Yeow Yeoh
RSSI threshold value used for mesh peering should be in negative value. After range checks to mesh parameters is introduced, this is not allowed. Fix this. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 05:54:50 +0000