summaryrefslogtreecommitdiff
path: root/net/wireless/nl80211.c
AgeCommit message (Collapse)Author
2025-07-17wifi: cfg80211: fix S1G beacon head validation in nl80211Lachlan Hodges
[ Upstream commit 1fe44a86ff0ff483aa1f1332f2b08f431fa51ce8 ] S1G beacons contain fixed length optional fields that precede the variable length elements, ensure we take this into account when validating the beacon. This particular case was missed in 1e1f706fc2ce ("wifi: cfg80211/mac80211: correctly parse S1G beacon optional elements"). Fixes: 1d47f1198d58 ("nl80211: correctly validate S1G beacon head") Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com> Link: https://patch.msgid.link/20250626115118.68660-1-lachlan.hodges@morsemicro.com [shorten/reword subject] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29wifi: cfg80211: allow IR in 20 MHz configurationsAnjaneyulu
[ Upstream commit cf4bd1608882792d4742e27a819493312904a680 ] Some regulatory bodies doesn't allow IR (initiate radioation) on a specific subband, but allows it for channels with a bandwidth of 20 MHz. Add a channel flag that indicates that, and consider it in cfg80211_reg_check_beaconing. While on it, fix the kernel doc of enum nl80211_reg_rule_flags and change it to use BIT(). Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308225541.d3ab352a73ff.I8a8f79e1c9eb74936929463960ee2a324712fe51@changeid [fix typo] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13wifi: nl80211: reject cooked mode if it is set along with other flagsVitaliy Shevtsov
commit 49f27f29446a5bfe633dd2cc0cfebd48a1a5e77f upstream. It is possible to set both MONITOR_FLAG_COOK_FRAMES and MONITOR_FLAG_ACTIVE flags simultaneously on the same monitor interface from the userspace. This causes a sub-interface to be created with no IEEE80211_SDATA_IN_DRIVER bit set because the monitor interface is in the cooked state and it takes precedence over all other states. When the interface is then being deleted the kernel calls WARN_ONCE() from check_sdata_in_driver() because of missing that bit. Fix this by rejecting MONITOR_FLAG_COOK_FRAMES if it is set along with other flags. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 66f7ac50ed7c ("nl80211: Add monitor interface configuration flags") Cc: stable@vger.kernel.org Reported-by: syzbot+2e5c1e55b9e5c28a3da7@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=2e5c1e55b9e5c28a3da7 Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru> Link: https://patch.msgid.link/20250131152657.5606-1-v.shevtsov@mt-integration.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19wifi: nl80211: fix NL80211_ATTR_MLO_LINK_ID off-by-oneLin Ma
[ Upstream commit 2e3dbf938656986cce73ac4083500d0bcfbffe24 ] Since the netlink attribute range validation provides inclusive checking, the *max* of attribute NL80211_ATTR_MLO_LINK_ID should be IEEE80211_MLD_MAX_NUM_LINKS - 1 otherwise causing an off-by-one. One crash stack for demonstration: ================================================================== BUG: KASAN: wild-memory-access in ieee80211_tx_control_port+0x3b6/0xca0 net/mac80211/tx.c:5939 Read of size 6 at addr 001102080000000c by task fuzzer.386/9508 CPU: 1 PID: 9508 Comm: syz.1.386 Not tainted 6.1.70 #2 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x177/0x231 lib/dump_stack.c:106 print_report+0xe0/0x750 mm/kasan/report.c:398 kasan_report+0x139/0x170 mm/kasan/report.c:495 kasan_check_range+0x287/0x290 mm/kasan/generic.c:189 memcpy+0x25/0x60 mm/kasan/shadow.c:65 ieee80211_tx_control_port+0x3b6/0xca0 net/mac80211/tx.c:5939 rdev_tx_control_port net/wireless/rdev-ops.h:761 [inline] nl80211_tx_control_port+0x7b3/0xc40 net/wireless/nl80211.c:15453 genl_family_rcv_msg_doit+0x22e/0x320 net/netlink/genetlink.c:756 genl_family_rcv_msg net/netlink/genetlink.c:833 [inline] genl_rcv_msg+0x539/0x740 net/netlink/genetlink.c:850 netlink_rcv_skb+0x1de/0x420 net/netlink/af_netlink.c:2508 genl_rcv+0x24/0x40 net/netlink/genetlink.c:861 netlink_unicast_kernel net/netlink/af_netlink.c:1326 [inline] netlink_unicast+0x74b/0x8c0 net/netlink/af_netlink.c:1352 netlink_sendmsg+0x882/0xb90 net/netlink/af_netlink.c:1874 sock_sendmsg_nosec net/socket.c:716 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x5cc/0x8f0 net/socket.c:2499 ___sys_sendmsg+0x21c/0x290 net/socket.c:2553 __sys_sendmsg net/socket.c:2582 [inline] __do_sys_sendmsg net/socket.c:2591 [inline] __se_sys_sendmsg+0x19e/0x270 net/socket.c:2589 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x45/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x63/0xcd Update the policy to ensure correct validation. Fixes: 7b0a0e3c3a88 ("wifi: cfg80211: do some rework towards MLO link APIs") Signed-off-by: Lin Ma <linma@zju.edu.cn> Suggested-by: Cengiz Can <cengiz.can@canonical.com> Link: https://patch.msgid.link/20241130170526.96698-1-linma@zju.edu.cn Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05wifi: nl80211: fix bounds checker error in nl80211_parse_sched_scanAleksei Vetrov
commit 9c46a3a5b394d6d123866aa44436fc2cd342eb0d upstream. The channels array in the cfg80211_scan_request has a __counted_by attribute attached to it, which points to the n_channels variable. This attribute is used in bounds checking, and if it is not set before the array is filled, then the bounds sanitizer will issue a warning or a kernel panic if CONFIG_UBSAN_TRAP is set. This patch sets the size of allocated memory as the initial value for n_channels. It is updated with the actual number of added elements after the array is filled. Fixes: aa4ec06c455d ("wifi: cfg80211: use __counted_by where appropriate") Cc: stable@vger.kernel.org Signed-off-by: Aleksei Vetrov <vvvvvv@google.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241029-nl80211_parse_sched_scan-bounds-checker-fix-v2-1-c804b787341f@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-15genetlink: hold RCU in genlmsg_mcast()Eric Dumazet
While running net selftests with CONFIG_PROVE_RCU_LIST=y I saw one lockdep splat [1]. genlmsg_mcast() uses for_each_net_rcu(), and must therefore hold RCU. Instead of letting all callers guard genlmsg_multicast_allns() with a rcu_read_lock()/rcu_read_unlock() pair, do it in genlmsg_mcast(). This also means the @flags parameter is useless, we need to always use GFP_ATOMIC. [1] [10882.424136] ============================= [10882.424166] WARNING: suspicious RCU usage [10882.424309] 6.12.0-rc2-virtme #1156 Not tainted [10882.424400] ----------------------------- [10882.424423] net/netlink/genetlink.c:1940 RCU-list traversed in non-reader section!! [10882.424469] other info that might help us debug this: [10882.424500] rcu_scheduler_active = 2, debug_locks = 1 [10882.424744] 2 locks held by ip/15677: [10882.424791] #0: ffffffffb6b491b0 (cb_lock){++++}-{3:3}, at: genl_rcv (net/netlink/genetlink.c:1219) [10882.426334] #1: ffffffffb6b49248 (genl_mutex){+.+.}-{3:3}, at: genl_rcv_msg (net/netlink/genetlink.c:61 net/netlink/genetlink.c:57 net/netlink/genetlink.c:1209) [10882.426465] stack backtrace: [10882.426805] CPU: 14 UID: 0 PID: 15677 Comm: ip Not tainted 6.12.0-rc2-virtme #1156 [10882.426919] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [10882.427046] Call Trace: [10882.427131] <TASK> [10882.427244] dump_stack_lvl (lib/dump_stack.c:123) [10882.427335] lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822) [10882.427387] genlmsg_multicast_allns (net/netlink/genetlink.c:1940 (discriminator 7) net/netlink/genetlink.c:1977 (discriminator 7)) [10882.427436] l2tp_tunnel_notify.constprop.0 (net/l2tp/l2tp_netlink.c:119) l2tp_netlink [10882.427683] l2tp_nl_cmd_tunnel_create (net/l2tp/l2tp_netlink.c:253) l2tp_netlink [10882.427748] genl_family_rcv_msg_doit (net/netlink/genetlink.c:1115) [10882.427834] genl_rcv_msg (net/netlink/genetlink.c:1195 net/netlink/genetlink.c:1210) [10882.427877] ? __pfx_l2tp_nl_cmd_tunnel_create (net/l2tp/l2tp_netlink.c:186) l2tp_netlink [10882.427927] ? __pfx_genl_rcv_msg (net/netlink/genetlink.c:1201) [10882.427959] netlink_rcv_skb (net/netlink/af_netlink.c:2551) [10882.428069] genl_rcv (net/netlink/genetlink.c:1220) [10882.428095] netlink_unicast (net/netlink/af_netlink.c:1332 net/netlink/af_netlink.c:1357) [10882.428140] netlink_sendmsg (net/netlink/af_netlink.c:1901) [10882.428210] ____sys_sendmsg (net/socket.c:729 (discriminator 1) net/socket.c:744 (discriminator 1) net/socket.c:2607 (discriminator 1)) Fixes: 33f72e6f0c67 ("l2tp : multicast notification to the registered listeners") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Chapman <jchapman@katalix.com> Cc: Tom Parkin <tparkin@katalix.com> Cc: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20241011171217.3166614-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-09wifi: cfg80211: fix two more possible UBSAN-detected off-by-one errorsDmitry Antipov
Although not reproduced in practice, these two cases may be considered by UBSAN as off-by-one errors. So fix them in the same way as in commit a26a5107bc52 ("wifi: cfg80211: fix UBSAN noise in cfg80211_wext_siwscan()"). Fixes: 807f8a8c3004 ("cfg80211/nl80211: add support for scheduled scans") Fixes: 5ba63533bbf6 ("cfg80211: fix alignment problem in scan request") Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Link: https://patch.msgid.link/20240909090806.1091956-1-dmantipov@yandex.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06wifi: cfg80211/mac80211: use proper link ID for DFSAditya Kumar Singh
Now that all APIs have support to handle DFS per link, use proper link ID instead of 0. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-8-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06wifi: cfg80211: handle DFS per linkAditya Kumar Singh
Currently, during starting a radar detection, no link id information is parsed and passed down. In order to support starting radar detection during Multi Link Operation, it is required to pass link id as well. Add changes to first parse and then pass link id in the start radar detection path. Additionally, update notification APIs to allow drivers/mac80211 to pass the link ID. However, everything is handled at link 0 only until all API's are ready to handle it per link. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-6-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06wifi: cfg80211: move DFS related members to links[] in wireless_devAditya Kumar Singh
A few members related to DFS handling are currently under per wireless device data structure. However, in order to support DFS with MLO, there is a need to have them on a per-link manner. Hence, as a preliminary step, move members cac_started, cac_start_time and cac_time_ms to be on a per-link basis. Since currently, link ID is not known at all places, use default value of 0 for now. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-5-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06wifi: cfg80211: skip indicating signal for per-STA profile BSSsVeerendranath Jakkam
Currently signal of the BSS entry generated from the per-STA profile indicated as zero, but userspace may consider it as high signal strength since 0 dBm is a valid RSSI value. To avoid this don't report the signal to userspace when the BSS entry created from a per-STA profile. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://patch.msgid.link/20240904030917.3602369-3-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-28wifi: cfg80211: Set correct chandef when starting CACIssam Hamdi
When starting CAC in a mode other than AP mode, it return a "WARNING: CPU: 0 PID: 63 at cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]" caused by the chandef.chan being null at the end of CAC. Solution: Ensure the channel definition is set for the different modes when starting CAC to avoid getting a NULL 'chan' at the end of CAC. Call Trace: ? show_regs.part.0+0x14/0x16 ? __warn+0x67/0xc0 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? report_bug+0xa7/0x130 ? exc_overflow+0x30/0x30 ? handle_bug+0x27/0x50 ? exc_invalid_op+0x18/0x60 ? handle_exception+0xf6/0xf6 ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? regulatory_propagate_dfs_state.cold+0x1b/0x4c [cfg80211] ? cfg80211_propagate_cac_done_wk+0x1a/0x30 [cfg80211] ? process_one_work+0x165/0x280 ? worker_thread+0x120/0x3f0 ? kthread+0xc2/0xf0 ? process_one_work+0x280/0x280 ? kthread_complete_and_exit+0x20/0x20 ? ret_from_fork+0x19/0x24 Reported-by: Kretschmer Mathias <mathias.kretschmer@fit.fraunhofer.de> Signed-off-by: Issam Hamdi <ih@simonwunderlich.de> Link: https://patch.msgid.link/20240816142418.3381951-1-ih@simonwunderlich.de [shorten subject, remove OCB, reorder cases to match previous list] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-09wifi: cfg80211: add support for advertising multiple radios belonging to a wiphyFelix Fietkau
The prerequisite for MLO support in cfg80211/mac80211 is that all the links participating in MLO must be from the same wiphy/ieee80211_hw. To meet this expectation, some drivers may need to group multiple discrete hardware each acting as a link in MLO under single wiphy. With this change, supported frequencies and interface combinations of each individual radio are reported to user space. This allows user space to figure out the limitations of what combination of channels can be used concurrently. Even for non-MLO devices, this improves support for devices capable of running on multiple channels at the same time. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/18a88f9ce82b1c9f7c12f1672430eaf2bb0be295.1720514221.git-series.nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-08wifi: nl80211: split helper function from nl80211_put_iface_combinationsFelix Fietkau
Create a helper function that puts the data from struct ieee80211_iface_combination to a nl80211 message. This will be used for adding per-radio interface combination data. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/22a0eee19dbcf98627239328bc66decd3395122c.1719919832.git-series.nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-28wifi: nl80211: don't give key data to userspaceJohannes Berg
When a key is requested by userspace, there's really no need to include the key data, the sequence counter is really what userspace needs in this case. The fact that it's included is just a historic quirk. Remove the key data. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240627104411.b6a4f097e4ea.I7e6cc976cb9e8a80ef25a3351330f313373b4578@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-27Merge tag 'wireless-next-2024-06-27' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== Highlights this time are: - cfg80211/nl80211: * improvements for 6 GHz regulatory flexibility - mac80211: * use generic netdev stats * multi-link improvements/fixes - brcmfmac: * MFP support (to enable WPA3) - wilc1000: * suspend/resume improvements - iwlwifi: * remove support for older FW for new devices * fast resume (keeping the device configured) - wl18xx: * support newer firmware versions * tag 'wireless-next-2024-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (100 commits) wifi: brcmfmac: of: Support interrupts-extended wifi: brcmsmac: advertise MFP_CAPABLE to enable WPA3 net: rfkill: Correct return value in invalid parameter case wifi: mac80211: fix NULL dereference at band check in starting tx ba session wifi: iwlwifi: mvm: fix rs.h kernel-doc wifi: iwlwifi: fw: api: datapath: fix kernel-doc wifi: iwlwifi: fix remaining mistagged kernel-doc comments wifi: iwlwifi: fix prototype mismatch kernel-doc warnings wifi: iwlwifi: fix kernel-doc in iwl-fh.h wifi: iwlwifi: fix kernel-doc in iwl-trans.h wifi: iwlwifi: pcie: fix kernel-doc wifi: iwlwifi: dvm: fix kernel-doc warnings wifi: iwlwifi: mvm: don't log error for failed UATS table read wifi: iwlwifi: trans: make bad state warnings wifi: iwlwifi: fw: api: fix some kernel-doc wifi: iwlwifi: mvm: remove init_dbg module parameter wifi: iwlwifi: update the BA notification API wifi: iwlwifi: mvm: always unblock EMLSR on ROC end wifi: iwlwifi: mvm: use IWL_FW_CHECK for link ID check wifi: iwlwifi: mvm: don't flush BSSes on restart with MLD API ... ==================== Link: https://patch.msgid.link/20240627114135.28507-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: e3f02f32a050 ("ionic: fix kernel panic due to multi-buffer handling") d9c04209990b ("ionic: Mark error paths in the data path as unlikely") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-26wifi: cfg80211: restrict NL80211_ATTR_TXQ_QUANTUM valuesEric Dumazet
syzbot is able to trigger softlockups, setting NL80211_ATTR_TXQ_QUANTUM to 2^31. We had a similar issue in sch_fq, fixed with commit d9e15a273306 ("pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM") watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [kworker/1:0:24] Modules linked in: irq event stamp: 131135 hardirqs last enabled at (131134): [<ffff80008ae8778c>] __exit_to_kernel_mode arch/arm64/kernel/entry-common.c:85 [inline] hardirqs last enabled at (131134): [<ffff80008ae8778c>] exit_to_kernel_mode+0xdc/0x10c arch/arm64/kernel/entry-common.c:95 hardirqs last disabled at (131135): [<ffff80008ae85378>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (131135): [<ffff80008ae85378>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (125892): [<ffff80008907e82c>] neigh_hh_init net/core/neighbour.c:1538 [inline] softirqs last enabled at (125892): [<ffff80008907e82c>] neigh_resolve_output+0x268/0x658 net/core/neighbour.c:1553 softirqs last disabled at (125896): [<ffff80008904166c>] local_bh_disable+0x10/0x34 include/linux/bottom_half.h:19 CPU: 1 PID: 24 Comm: kworker/1:0 Not tainted 6.9.0-rc7-syzkaller-gfda5695d692c #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Workqueue: mld mld_ifc_work pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __list_del include/linux/list.h:195 [inline] pc : __list_del_entry include/linux/list.h:218 [inline] pc : list_move_tail include/linux/list.h:310 [inline] pc : fq_tin_dequeue include/net/fq_impl.h:112 [inline] pc : ieee80211_tx_dequeue+0x6b8/0x3b4c net/mac80211/tx.c:3854 lr : __list_del_entry include/linux/list.h:218 [inline] lr : list_move_tail include/linux/list.h:310 [inline] lr : fq_tin_dequeue include/net/fq_impl.h:112 [inline] lr : ieee80211_tx_dequeue+0x67c/0x3b4c net/mac80211/tx.c:3854 sp : ffff800093d36700 x29: ffff800093d36a60 x28: ffff800093d36960 x27: dfff800000000000 x26: ffff0000d800ad50 x25: ffff0000d800abe0 x24: ffff0000d800abf0 x23: ffff0000e0032468 x22: ffff0000e00324d4 x21: ffff0000d800abf0 x20: ffff0000d800abf8 x19: ffff0000d800abf0 x18: ffff800093d363c0 x17: 000000000000d476 x16: ffff8000805519dc x15: ffff7000127a6cc8 x14: 1ffff000127a6cc8 x13: 0000000000000004 x12: ffffffffffffffff x11: ffff7000127a6cc8 x10: 0000000000ff0100 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffff80009287aa08 x4 : 0000000000000008 x3 : ffff80008034c7fc x2 : ffff0000e0032468 x1 : 00000000da0e46b8 x0 : ffff0000e0032470 Call trace: __list_del include/linux/list.h:195 [inline] __list_del_entry include/linux/list.h:218 [inline] list_move_tail include/linux/list.h:310 [inline] fq_tin_dequeue include/net/fq_impl.h:112 [inline] ieee80211_tx_dequeue+0x6b8/0x3b4c net/mac80211/tx.c:3854 wake_tx_push_queue net/mac80211/util.c:294 [inline] ieee80211_handle_wake_tx_queue+0x118/0x274 net/mac80211/util.c:315 drv_wake_tx_queue net/mac80211/driver-ops.h:1350 [inline] schedule_and_wake_txq net/mac80211/driver-ops.h:1357 [inline] ieee80211_queue_skb+0x18e8/0x2244 net/mac80211/tx.c:1664 ieee80211_tx+0x260/0x400 net/mac80211/tx.c:1966 ieee80211_xmit+0x278/0x354 net/mac80211/tx.c:2062 __ieee80211_subif_start_xmit+0xab8/0x122c net/mac80211/tx.c:4338 ieee80211_subif_start_xmit+0xe0/0x438 net/mac80211/tx.c:4532 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x27c/0x938 net/core/dev.c:3547 __dev_queue_xmit+0x1678/0x33fc net/core/dev.c:4341 dev_queue_xmit include/linux/netdevice.h:3091 [inline] neigh_resolve_output+0x558/0x658 net/core/neighbour.c:1563 neigh_output include/net/neighbour.h:542 [inline] ip6_finish_output2+0x104c/0x1ee8 net/ipv6/ip6_output.c:137 ip6_finish_output+0x428/0x7a0 net/ipv6/ip6_output.c:222 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x270/0x594 net/ipv6/ip6_output.c:243 dst_output include/net/dst.h:450 [inline] NF_HOOK+0x160/0x4f0 include/linux/netfilter.h:314 mld_sendpack+0x7b4/0x10f4 net/ipv6/mcast.c:1818 mld_send_cr net/ipv6/mcast.c:2119 [inline] mld_ifc_work+0x840/0xd0c net/ipv6/mcast.c:2650 process_one_work+0x7b8/0x15d4 kernel/workqueue.c:3267 process_scheduled_works kernel/workqueue.c:3348 [inline] worker_thread+0x938/0xef4 kernel/workqueue.c:3429 kthread+0x288/0x310 kernel/kthread.c:388 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Fixes: 52539ca89f36 ("cfg80211: Expose TXQ stats and parameters to userspace") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240615160800.250667-1-edumazet@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: nl80211: remove the FTMs per burst limit for NDP rangingAvraham Stern
In NDP ranging, the number of NDP exchanges is not negotiated and thus is not limited by the protocol. Remove the limit on FTMs per burst for trigger based and non trigger based ranging. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240605135233.916e228537d9.I5fe4c1cefa1c1328726e7615dd5a0d861c694381@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: cfg80211: add regulatory flag to allow VLP AP operationJohannes Berg
Add a regulatory flag to allow VLP AP operation even on channels otherwise marked NO_IR, which may be possible in some regulatory domains/countries. Note that this requires checking also when the beacon is changed, since that may change the regulatory power type. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240523120945.63792ce19790.Ie2a02750d283b78fbf3c686b10565fb0388889e2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: mac80211: refactor channel checksJohannes Berg
To later introduce an override for VLP APs being allowed despite NO-IR flags, which is somewhat similar in construction to being allowed to monitor on disabled channels, refactor the code that checks channel flags to have not a 'monitor' argument but a set of 'permitting' flags that permit the operation without checking for 'prohibited' flags. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240523120945.3da28ded4a50.I90cffc633d0510293d511f60097dc75e719b55f0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: nl80211: expose can-monitor channel propertyJohannes Berg
It may be possible to monitor on disabled channels per the can-monitor flag, but evidently I forgot to expose that out to userspace. Fix that. Fixes: a110a3b79177 ("wifi: cfg80211: optionally support monitor on disabled channels") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240523120945.9a2c19a51e53.I50fa1b1a18b70f63a5095131ac23dc2e71f3d426@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: nl80211: clean up coalescing rule handlingJohannes Berg
There's no need to allocate a tiny struct and then an array again, just allocate the two together and use __counted_by(). Also unify the freeing. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240523120213.48a40cfb96f9.Ia02bf8f8fefbf533c64c5fa26175848d4a3a7899@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: cfg80211: restrict operation during radar detectionJohannes Berg
Just like it's not currently possible to start radar detection while already operating, it shouldn't be possible to start operating while radar detection is running. Fix that. Also, improve the check whether operating (carrier might not be up if e.g. attempting to join IBSS). Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506211158.ae8dca3d0d6c.I7c70a66a5fbdbc63a78fee8a34f31d1995491bc3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: nl80211: disallow setting special AP channel widthsJohannes Berg
Setting the AP channel width is meant for use with the normal 20/40/... MHz channel width progression, and switching around in S1G or narrow channels isn't supported. Disallow that. Reported-by: syzbot+bc0f5b92cc7091f45fb6@syzkaller.appspotmail.com Link: https://msgid.link/20240515141600.d4a9590bfe32.I19a32d60097e81b527eafe6b0924f6c5fbb2dc45@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06Merge wireless into wireless-nextJohannes Berg
Given how late we are in the cycle, merge the two fixes from wireless into wireless-next as they don't see that urgent. This way, the wireless tree won't need rebasing later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-03wifi: cfg80211: handle color change per linkAditya Kumar Singh
Currently, during color change, no link id information is passed down. In order to support color change during Multi Link Operation, it is required to pass link id as well. Additionally, update notification APIs to allow drivers/mac80211 to pass the link ID. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240422053412.2024075-2-quic_adisi@quicinc.com Link: https://msgid.link/20240422053412.2024075-3-quic_adisi@quicinc.com [squash, actually only pass 0 from mac80211] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-03wifi: nl80211: Avoid address calculations via out of bounds array indexingKees Cook
Before request->channels[] can be used, request->n_channels must be set. Additionally, address calculations for memory after the "channels" array need to be calculated from the allocation base ("request") rather than via the first "out of bounds" index of "channels", otherwise run-time bounds checking will throw a warning. Reported-by: Nathan Chancellor <nathan@kernel.org> Fixes: e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by") Signed-off-by: Kees Cook <keescook@chromium.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Link: https://msgid.link/20240424220057.work.819-kees@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/ti/icssg/icssg_prueth.c net/mac80211/chan.c 89884459a0b9 ("wifi: mac80211: fix idle calculation with multi-link") 87f5500285fb ("wifi: mac80211: simplify ieee80211_assign_link_chanctx()") https://lore.kernel.org/all/20240422105623.7b1fbda2@canb.auug.org.au/ net/unix/garbage.c 1971d13ffa84 ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().") 4090fa373f0e ("af_unix: Replace garbage collection algorithm.") drivers/net/ethernet/ti/icssg/icssg_prueth.c drivers/net/ethernet/ti/icssg/icssg_common.c 4dcd0e83ea1d ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()") e2dc7bfd677f ("net: ti: icssg-prueth: Move common functions into a separate file") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-19wifi: cfg80211: make some regulatory functions voidJohannes Berg
The return value of regulatory_hint_indoor() is always 0 for success, and the return value of regulatory_hint_found_beacon() is always ignored. Make them both have void return. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: nl80211: don't free NULL coalescing ruleJohannes Berg
If the parsing fails, we can dereference a NULL pointer here. Cc: stable@vger.kernel.org Fixes: be29b99a9b51 ("cfg80211/nl80211: Add packet coalesce support") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240418105220.b328f80406e7.Id75d961050deb05b3e4e354e024866f350c68103@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: net/mptcp/protocol.c adf1bb78dab5 ("mptcp: fix snd_wnd initialization for passive socket") 9426ce476a70 ("mptcp: annotate lockless access for RX path fields") https://lore.kernel.org/all/20240228103048.19255709@canb.auug.org.au/ Adjacent changes: drivers/dpll/dpll_core.c 0d60d8df6f49 ("dpll: rely on rcu for netdev_dpll_pin()") e7f8df0e81bf ("dpll: move xa_erase() call in to match dpll_pin_alloc() error path order") drivers/net/veth.c 1ce7d306ea63 ("veth: try harder when allocating queue memory") 0bef512012b1 ("net: add netdev_lockdep_set_classes() to virtual drivers") drivers/net/wireless/intel/iwlwifi/mvm/d3.c 8c9bef26e98b ("wifi: iwlwifi: mvm: d3: implement suspend with MLO") 78f65fbf421a ("wifi: iwlwifi: mvm: ensure offloading TID queue exists") net/wireless/nl80211.c f78c1375339a ("wifi: nl80211: reject iftype change with mesh ID change") 414532d8aa89 ("wifi: cfg80211: use IEEE80211_MAX_MESH_ID_LEN appropriately") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-21wifi: nl80211: refactor parsing CSA offsetsJohannes Berg
The CSA offset parsing happens the same way for all of beacon template offsets, probe response template offsets and TX offsets (for using during probe response TX from userspace directly). Refactor the parsing here. There's an additional check this introduces, which is that the number of counters in TX offsets doesn't exceed the driver capability, but as only two counters are used at most for anything, this is hopefully OK. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21wifi: nl80211: force WLAN_AKM_SUITE_SAE in big endian in ↵Alexis Lothoré
NL80211_CMD_EXTERNAL_AUTH User-space supplicant (observed at least on wpa_supplicant) historically parses the NL80211_ATTR_AKM_SUITES from the NL80211_CMD_EXTERNAL_AUTH message as big endian _only_ when its value is WLAN_AKM_SUITE_SAE, while processing anything else in host endian. This behavior makes any driver relying on SAE external auth to switch AKM suite to big endian if it is WLAN_AKM_SUITE_SAE. A fix bringing compatibility with both endianness has been brought into wpa_supplicant, however we must keep compatibility with older versions, while trying to reduce the occurences of this manual conversion in wireless drivers. Add the be32 conversion specifically on WLAN_AKM_SUITE_SAE in nl80211 layer to keep compatibility with older wpa_supplicant versions. Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Link: https://msgid.link/20240215-nl80211_fix_akm_suites_endianness-v1-1-57e902632f9d@bootlin.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-15wifi: nl80211: reject iftype change with mesh ID changeJohannes Berg
It's currently possible to change the mesh ID when the interface isn't yet in mesh mode, at the same time as changing it into mesh mode. This leads to an overwrite of data in the wdev->u union for the interface type it currently has, causing cfg80211_change_iface() to do wrong things when switching. We could probably allow setting an interface to mesh while setting the mesh ID at the same time by doing a different order of operations here, but realistically there's no userspace that's going to do this, so just disallow changes in iftype when setting mesh ID. Cc: stable@vger.kernel.org Fixes: 29cbe68c516a ("cfg80211/mac80211: add mesh join/leave commands") Reported-by: syzbot+dd4779978217b1973180@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-15wifi: cfg80211: use IEEE80211_MAX_MESH_ID_LEN appropriatelyJohannes Berg
Even if that's the same as IEEE80211_MAX_SSID_LEN, we really should just use IEEE80211_MAX_MESH_ID_LEN for mesh, rather than having the BUILD_BUG_ON()s. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-12wifi: cfg80211: report unprotected deauth/disassoc in wowlanShaul Triebitz
Add to cfg80211_wowlan_wakeup another wakeup reason - unprot_deauth_disassoc. To be set to true if the woke up was due to an unprotected deauth or disassoc frame in MFP. In that case report WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240206164849.a3d739850d03.I8f52a21c4f36d1af1f8068bed79e2f9cbf8289ef@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-12wifi: cfg80211: optionally support monitor on disabled channelsJohannes Berg
If the hardware supports a disabled channel, it may in some cases be possible to use monitor mode (without any transmit) on it when it's otherwise disabled. Add a new channel flag IEEE80211_CHAN_CAN_MONITOR that makes it possible for a driver to indicate such a thing. Make it per channel so drivers could have a choice with it, perhaps it's only possible on some channels, perhaps some channels are not supported at all, but still there and marked disabled. In _nl80211_parse_chandef() simplify the code and check only for an unknown channel, _cfg80211_chandef_usable() will later check for IEEE80211_CHAN_DISABLED anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240206164849.87fad3a21a09.I9116b2fdc2e2c9fd59a9273a64db7fcb41fc0328@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-12wifi: cfg80211: rename UHB to 6 GHzJohannes Berg
UHB stands for "Ultra High Band", but this term doesn't really exist in the spec. Rename all occurrences to "6 GHz", but keep a few defines for userspace API compatibility. Link: https://msgid.link/20240206164849.c9cfb9400839.I153db3b951934a1d84409c17fbe1f1d1782543fa@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-12wifi: cfg80211: add support for link id attribute in NL80211_CMD_DEL_STATIONAditya Kumar Singh
Currently whenever NL80211_CMD_DEL_STATION command is called without any MAC address, all stations present on that interface are flushed. However with MLO there is a need to flush such stations only which are using at least a particular link from the AP MLD interface. For example - 2 GHz and 5 GHz are part of an AP MLD. To this interface, following stations are connected - 1. One non-EHT STA on 2 GHz link. 2. One non-EHT STA on 5 GHz link. 3. One Multi-Link STA having 2 GHz and 5 GHz as active links. Now if currently, NL80211_CMD_DEL_STATION is issued by the 2 GHz link without any MAC address, it would flush all station entries. However, flushing of station entry #2 at least is not desireable since it is connected to 5 GHz link alone. Hence, add an option to pass link ID as well in the command so that if link ID is passed, stations using that passed link ID alone would be flushed and others will not. So after this, station entries #1 and #3 alone would be flushed and #2 will remain as it is. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240205162952.1697646-2-quic_adisi@quicinc.com [clarify documentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: cfg80211: send link id in channel_switch opsAditya Kumar Singh
Currently, during channel switch, no link id information is passed down. In order to support channel switch during Multi Link Operation, it is required to pass link id as well. Add changes to pass link id in the channel_switch cfg80211_ops. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240130140918.1172387-2-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: cfg80211/mac80211: move puncturing into chandefJohannes Berg
Aloka originally suggested that puncturing should be part of the chandef, so that it's treated correctly. At the time, I disagreed and it ended up not part of the chandef, but I've now realized that this was wrong. Even for clients, the RX, and perhaps more importantly, CCA configuration needs to take puncturing into account. Move puncturing into the chandef, and adjust all the code accordingly. Also add a few tests for puncturing in chandef compatibility checking. Link: https://lore.kernel.org/linux-wireless/20220214223051.3610-1-quic_alokad@quicinc.com/ Suggested-by: Aloka Dixit <quic_alokad@quicinc.com> Link: https://msgid.link/20240129194108.307183a5d2e5.I4d7fe2f126b2366c1312010e2900dfb2abffa0f6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: nl80211: move WPA version validation to policyJohannes Berg
For a contiguous mask (starting with bit 0) of allowed values in a bitmap, it's equivalent to check "!(val & ~mask)" and "val ∈ [0, mask]". Use that to move the WPA versions check to the policy, for better error reporting. Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://msgid.link/20240129195421.e8cae9866ccb.I2539b395e3476307d702c6867e51a937e52e57a0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26Revert "nl80211/cfg80211: Specify band specific min RSSI thresholds with ↵Jeff Johnson
sched scan" This *mostly* reverts commit 1e1b11b6a111 ("nl80211/cfg80211: Specify band specific min RSSI thresholds with sched scan"). During the review of a new patch [1] it was observed that the functionality being modified was not actually being used by any in-tree driver. Further research determined that the functionality was originally introduced to support a new Android interface, but that interface was subsequently abandoned. Since the functionality has apparently never been used, remove it. However, to mantain the sanctity of the UABI, keep the nl80211.h assignments, but clearly mark them as obsolete. Cc: Lin Ma <linma@zju.edu.cn> Cc: Vamsi Krishna <quic_vamsin@quicinc.com> Link: https://lore.kernel.org/linux-wireless/20240119151201.8670-1-linma@zju.edu.cn/ [1] Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://msgid.link/20240125-for-next-v1-1-fd79e01c6c09@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26wifi: cfg80211: validate MLO connections betterJohannes Berg
When going into an MLO connection, validate that the link IDs match what userspace indicated, and that the AP MLD addresses and capabilities are all matching between the links. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240102213313.ff83c034cb9a.I9962db0bfa8c73b37b8d5b59a3fad7f02f2129ae@changeid [roll in extra fix from Miri to actually check the return value] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26wifi: cfg80211: add support for SPP A-MSDUsJohannes Berg
Add SPP (signaling and payload protected) AMSDU support. Since userspace has to build the RSNX element, add an extended feature flag to indicate that this is supported. In order to avoid downgrade/mismatch attacks, add a flag to the assoc command on the station side, so that we can be sure that the value of the flag comes from the same RSNX element that will be validated by the supplicant against the 4-way-handshake. If we just pulled the data out of a beacon/probe response, we could theoretically look an RSNX element from a different frame, with a different value for this flag, than the supplicant is using to validate in the 4-way-handshake. Note that this patch is only geared towards software crypto implementations or hardware ones that can perfectly implement SPP A-MSDUs, i.e. are able to switch the AAD construction on the fly for each TX/RX frame. For more limited hardware implementations, more capability advertisement would be required, e.g. if the hardware has no way to switch this on the fly but has only a global configuration that must apply to all stations. The driver could of course *reject* mismatches, but the supplicant must know so it can do things like not negotiating SPP A-MSDUs on a T-DLS link when connected to an AP that doesn't support it, or similar. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240102213313.fadac8df7030.I9240aebcba1be49636a73c647ed0af862713fc6f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-23Merge tag 'wireless-2024-01-22' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.8-rc2 The most visible fix here is the ath11k crash fix which was introduced in v6.7. We also have a fix for iwlwifi memory corruption and few smaller fixes in the stack. * tag 'wireless-2024-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: fix race condition on enabling fast-xmit wifi: iwlwifi: fix a memory corruption wifi: mac80211: fix potential sta-link leak wifi: cfg80211/mac80211: remove dependency on non-existing option wifi: cfg80211: fix missing interfaces when dumping wifi: ath11k: rely on mac80211 debugfs handling for vif wifi: p54: fix GCC format truncation warning with wiphy->fw_version ==================== Link: https://lore.kernel.org/r/20240122153434.E0254C433C7@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-18wifi: cfg80211: fix missing interfaces when dumpingMichal Kazior
The nl80211_dump_interface() supports resumption in case nl80211_send_iface() doesn't have the resources to complete its work. The logic would store the progress as iteration offsets for rdev and wdev loops. However the logic did not properly handle resumption for non-last rdev. Assuming a system with 2 rdevs, with 2 wdevs each, this could happen: dump(cb=[0, 0]): if_start=cb[1] (=0) send rdev0.wdev0 -> ok send rdev0.wdev1 -> yield cb[1] = 1 dump(cb=[0, 1]): if_start=cb[1] (=1) send rdev0.wdev1 -> ok // since if_start=1 the rdev0.wdev0 got skipped // through if_idx < if_start send rdev1.wdev1 -> ok The if_start needs to be reset back to 0 upon wdev loop end. The problem is actually hard to hit on a desktop, and even on most routers. The prerequisites for this manifesting was: - more than 1 wiphy - a few handful of interfaces - dump without rdev or wdev filter I was seeing this with 4 wiphys 9 interfaces each. It'd miss 6 interfaces from the last wiphy reported to userspace. Signed-off-by: Michal Kazior <michal@plume.com> Link: https://msgid.link/20240116142340.89678-1-kazikcz@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: cfg80211: handle UHB AP and STA power typeMukesh Sisodiya
UHB AP send supported power type(LPI, SP, VLP) in beacon and probe response IE and STA should connect to these AP only if their regulatory support the AP power type. Beacon/Probe response are reported to userspace with reason "STA regulatory not supporting to connect to AP based on transmitted power type" and it should not connect to AP. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231220133549.cbfbef9170a9.I432f78438de18aa9f5c9006be12e41dc34cc47c5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: cfg80211: Schedule regulatory check on BSS STA channel changeAndrei Otcheretianski
Due to different relaxation policies it may be needed to re-check channels after a BSS station interface is disconnected or performed a channel switch. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231220133549.1f2f8475bcf1.I1879d259d8d756159c8060f61f4bce172e6d323e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 22:44:47 +0000