| Age | Commit message (Collapse) | Author |
|---|
|
Have frwr's ro_unmap_sync recognize an invalidated rkey that appears
as part of a Receive completion. Local invalidation can be skipped
for that rkey.
Use an out-of-band signaling mechanism to indicate to the server
that the client is prepared to receive RDMA Send With Invalidate.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Send an RDMA-CM private message on connect, and look for one during
a connection-established event.
Both sides can communicate their various implementation limits.
Implementations that don't support this sideband protocol ignore it.
Once the client knows the server's inline threshold maxima, it can
adjust the use of Reply chunks, and eliminate most use of Position
Zero Read chunks. Moderately-sized I/O can be done using a pure
inline RDMA Send instead of RDMA operations that require memory
registration.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Clean up: Most of the fields in each send_wr do not vary. There is
no need to initialize them before each ib_post_send(). This removes
a large-ish data structure from the stack.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Clean up.
Since commit fc66448549bb ("xprtrdma: Split the completion queue"),
rpcrdma_ep_post_recv() no longer uses the "ep" argument.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Currently, each regbuf is allocated and DMA mapped at the same time.
This is done during transport creation.
When a device driver is unloaded, every DMA-mapped buffer in use by
a transport has to be unmapped, and then remapped to the new
device if the driver is loaded again. Remapping will have to be done
_after_ the connect worker has set up the new device.
But there's an ordering problem:
call_allocate, which invokes xprt_rdma_allocate which calls
rpcrdma_alloc_regbuf to allocate Send buffers, happens _before_
the connect worker can run to set up the new device.
Instead, at transport creation, allocate each buffer, but leave it
unmapped. Once the RPC carries these buffers into ->send_request, by
which time a transport connection should have been established,
check to see that the RPC's buffers have been DMA mapped. If not,
map them there.
When device driver unplug support is added, it will simply unmap all
the transport's regbufs, but it doesn't have to deallocate the
underlying memory.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Clean up: r_xprt is already available everywhere these macros are
invoked, so just dereference that directly.
RPCRDMA_INLINE_PAD_VALUE is no longer used, so it can simply be
removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Direct data placement is not allowed when using flavors that
guarantee integrity or privacy. When such security flavors are in
effect, don't allow the use of Read and Write chunks for moving
individual data items. All messages larger than the inline threshold
are sent via Long Call or Long Reply.
On my systems (CX-3 Pro on FDR), for small I/O operations, the use
of Long messages adds only around 5 usecs of latency in each
direction.
Note that when integrity or encryption is used, the host CPU touches
every byte in these messages. Even if it could be used, data
movement offload doesn't buy much in this case.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
fixup_copy_count should count only the number of bytes copied to the
page list. The head and tail are now always handled without a data
copy.
And the debugging at the end of rpcrdma_inline_fixup() is also no
longer necessary, since copy_len will be non-zero when there is reply
data in the tail (a normal and valid case).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Now that rpcrdma_inline_fixup() updates only two fields in
rq_rcv_buf, a full memcpy of that structure to rq_private_buf is
unwarranted. Updating rq_private_buf fields only where needed also
better documents what is going on.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
While trying NFSv4.0/RDMA with sec=krb5p, I noticed small NFS READ
operations failed. After the client unwrapped the NFS READ reply
message, the NFS READ XDR decoder was not able to decode the reply.
The message was "Server cheating in reply", with the reported
number of received payload bytes being zero. Applications reported
a read(2) that returned -1/EIO.
The problem is rpcrdma_inline_fixup() sets the tail.iov_len to zero
when the incoming reply fits entirely in the head iovec. The zero
tail.iov_len confused xdr_buf_trim(), which then mangled the actual
reply data instead of simply removing the trailing GSS checksum.
As near as I can tell, RPC transports are not supposed to update the
head.iov_len, page_len, or tail.iov_len fields in the receive XDR
buffer when handling an incoming RPC reply message. These fields
contain the length of each component of the XDR buffer, and hence
the maximum number of bytes of reply data that can be stored in each
XDR buffer component. I've concluded this because:
- This is how xdr_partial_copy_from_skb() appears to behave
- rpcrdma_inline_fixup() already does not alter page_len
- call_decode() compares rq_private_buf and rq_rcv_buf and WARNs
if they are not exactly the same
Unfortunately, as soon as I tried the simple fix to just remove the
line that sets tail.iov_len to zero, I saw that the logic that
appends the implicit Write chunk pad inline depends on inline_fixup
setting tail.iov_len to zero.
To address this, re-organize the tail iovec handling logic to use
the same approach as with the head iovec: simply point tail.iov_base
to the correct bytes in the receive buffer.
While I remember all this, write down the conclusion in documenting
comments.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
When the remaining length of an incoming reply is longer than the
XDR buf's page_len, switch over to the tail iovec instead of
copying more than page_len bytes into the page list.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Currently, all three chunk list encoders each use a portion of the
one rl_segments array in rpcrdma_req. This is because the MWs for
each chunk list were preserved in rl_segments so that ro_unmap could
find and invalidate them after the RPC was complete.
However, now that MWs are placed on a per-req linked list as they
are registered, there is no longer any information in rpcrdma_mr_seg
that is shared between ro_map and ro_unmap_{sync,safe}, and thus
nothing in rl_segments needs to be preserved after
rpcrdma_marshal_req is complete.
Thus the rl_segments array can be used now just for the needs of
each rpcrdma_convert_iovs call. Once each chunk list is encoded, the
next chunk list encoder is free to re-use all of rl_segments.
This means all three chunk lists in one RPC request can now each
encode a full size data payload with no increase in the size of
rl_segments.
This is a key requirement for Kerberos support, since both the Call
and Reply for a single RPC transaction are conveyed via Long
messages (RDMA Read/Write). Both can be large.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Instead of placing registered MWs sparsely into the rl_segments
array, place these MWs on a per-req list.
ro_unmap_{sync,safe} can then simply pull those MWs off the list
instead of walking through the array.
This change significantly reduces the size of struct rpcrdma_req
by removing nsegs and rl_mw from every array element.
As an additional clean-up, chunk co-ordinates are returned in the
"*mw" output argument so they are no longer needed in every
array element.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Clean up, based on code audit: Remove the possibility that the
chunk list XDR encoders can return zero, which would be interpreted
as a NULL.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Commit c93c62231cf5 ("xprtrdma: Disconnect on registration failure")
added a disconnect for some RPC marshaling failures. This is needed
only in a handful of cases, but it was triggering for simple stuff
like temporary resource shortages. Try to straighten this out.
Fix up the lower layers so they don't return -ENOMEM or other error
codes that the RPC client's FSM doesn't explicitly recognize.
Also fix up the places in the send_request path that do want a
disconnect. For example, when ib_post_send or ib_post_recv fail,
this is a sign that there is a send or receive queue resource
miscalculation. That should be rare, and is a sign of a software
bug. But xprtrdma can recover: disconnect to reset the transport and
start over.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
There needs to be a safe method of releasing registered memory
resources when an RPC terminates. Safe can mean a number of things:
+ Doesn't have to sleep
+ Doesn't rely on having a QP in RTS
ro_unmap_safe will be that safe method. It can be used in cases
where synchronous memory invalidation can deadlock, or needs to have
an active QP.
The important case is fencing an RPC's memory regions after it is
signaled (^C) and before it exits. If this is not done, there is a
window where the server can write an RPC reply into memory that the
client has released and re-used for some other purpose.
Note that this is a full solution for FRWR, but FMR and physical
still have some gaps where a particularly bad server can wreak
some havoc on the client. These gaps are not made worse by this
patch and are expected to be exceptionally rare and timing-based.
They are noted in documenting comments.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
rpcrdma_create_chunks() has been replaced, and can be removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
rpcrdma_marshal_req() makes a simplifying assumption: that NFS
operations with large Call messages have small Reply messages, and
vice versa. Therefore with RPC-over-RDMA, only one chunk type is
ever needed for each Call/Reply pair, because one direction needs
chunks, the other direction will always fit inline.
In fact, this assumption is asserted in the code:
if (rtype != rpcrdma_noch && wtype != rpcrdma_noch) {
dprintk("RPC: %s: cannot marshal multiple chunk lists\n",
__func__);
return -EIO;
}
But RPCGSS_SEC breaks this assumption. Because krb5i and krb5p
perform data transformation on RPC messages before they are
transmitted, direct data placement techniques cannot be used, thus
RPC messages must be sent via a Long call in both directions.
All such calls are sent with a Position Zero Read chunk, and all
such replies are handled with a Reply chunk. Thus the client must
provide every Call/Reply pair with both a Read list and a Reply
chunk.
Without any special security in effect, NFSv4 WRITEs may now also
use the Read list and provide a Reply chunk. The marshal_req
logic was preventing that, meaning an NFSv4 WRITE with a large
payload that included a GETATTR result larger than the inline
threshold would fail.
The code that encodes each chunk list is now completely contained in
its own function. There is some code duplication, but the trade-off
is that the overall logic should be more clear.
Note that all three chunk lists now share the rl_segments array.
Some additional per-req accounting is necessary to track this
usage. For the same reasons that the above simplifying assumption
has held true for so long, I don't expect more array elements are
needed at this time.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Update documenting comments to reflect code changes over the past
year.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Avoid the latency and interrupt overhead of registering a Write
chunk when handling NFS READ requests of a few hundred bytes or
less.
This change does not interoperate with Linux NFS/RDMA servers
that do not have commit 9d11b51ce7c1 ('svcrdma: Fix send_reply()
scatter/gather set-up'). Commit 9d11b51ce7c1 was introduced in v4.3,
and is included in 4.2.y, 4.1.y, and 3.18.y.
Oracle bug 22925946 has been filed to request that the above fix
be included in the Oracle Linux UEK4 NFS/RDMA server.
Red Hat bugzillas 1327280 and 1327554 have been filed to request
that RHEL NFS/RDMA server backports include the above fix.
Workaround: Replace the "proto=rdma,port=20049" mount options
with "proto=tcp" until commit 9d11b51ce7c1 is applied to your
NFS server.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
When deciding whether to send a Call inline, rpcrdma_marshal_req
doesn't take into account header bytes consumed by chunk lists.
This results in Call messages on the wire that are sometimes larger
than the inline threshold.
Likewise, when a Write list or Reply chunk is in play, the server's
reply has to emit an RDMA Send that includes a larger-than-minimal
RPC-over-RDMA header.
The actual size of a Call message cannot be estimated until after
the chunk lists have been registered. Thus the size of each
RPC-over-RDMA header can be estimated only after chunks are
registered; but the decision to register chunks is based on the size
of that header. Chicken, meet egg.
The best a client can do is estimate header size based on the
largest header that might occur, and then ensure that inline content
is always smaller than that.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Commit fe97b47cd623 ("xprtrdma: Use workqueue to process RPC/RDMA
replies") replaced the reply tasklet with a workqueue that allows
RPC replies to be processed in parallel. Thus the credit values in
RPC-over-RDMA replies can be applied in a different order than in
which the server sent them.
To fix this, revert commit eba8ff660b2d ("xprtrdma: Move credit
update to RPC reply handler"). Reverting is done by hand to
accommodate code changes that have occurred since then.
Fixes: fe97b47cd623 ("xprtrdma: Use workqueue to process . . .")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
These are shorter than RPCRDMA_HDRLEN_MIN, and they need to
complete the waiting RPC.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
A single memory allocation is used for the pair of buffers wherein
the RPC client builds an RPC call message and decodes its matching
reply. These buffers are sized based on the maximum possible size
of the RPC call and reply messages for the operation in progress.
This means that as the call buffer increases in size, the start of
the reply buffer is pushed farther into the memory allocation.
RPC requests are growing in size. It used to be that both the call
and reply buffers fit inside a single page.
But these days, thanks to NFSv4 (and especially security labels in
NFSv4.2) the maximum call and reply sizes are large. NFSv4.0 OPEN,
for example, now requires a 6KB allocation for a pair of call and
reply buffers, and NFSv4 LOOKUP is not far behind.
As the maximum size of a call increases, the reply buffer is pushed
far enough into the buffer's memory allocation that a page boundary
can appear in the middle of it.
When the maximum possible reply size is larger than the client's
RDMA receive buffers (currently 1KB), the client has to register a
Reply chunk for the server to RDMA Write the reply into.
The logic in rpcrdma_convert_iovs() assumes that xdr_buf head and
tail buffers would always be contained on a single page. It supplies
just one segment for the head and one for the tail.
FMR, for example, registers up to a page boundary (only a portion of
the reply buffer in the OPEN case above). But without additional
segments, it doesn't register the rest of the buffer.
When the server tries to write the OPEN reply, the RDMA Write fails
with a remote access error since the client registered only part of
the Reply chunk.
rpcrdma_convert_iovs() must split the XDR buffer into multiple
segments, each of which are guaranteed not to contain a page
boundary. That way fmr_op_map is given the proper number of segments
to register the whole reply buffer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
There is a window between the time the RPC reply handler wakes the
waiting RPC task and when xprt_release() invokes ops->buf_free.
During this time, memory regions containing the data payload may
still be accessed by a broken or malicious server, but the RPC
application has already been allowed access to the memory containing
the RPC request's data payloads.
The server should be fenced from client memory containing RPC data
payloads _before_ the RPC application is allowed to continue.
This change also more strongly enforces send queue accounting. There
is a maximum number of RPC calls allowed to be outstanding. When an
RPC/RDMA transport is set up, just enough send queue resources are
allocated to handle registration, Send, and invalidation WRs for
each those RPCs at the same time.
Before, additional RPC calls could be dispatched while invalidation
WRs were still consuming send WQEs. When invalidation WRs backed
up, dispatching additional RPCs resulted in a send queue overrun.
Now, the reply handler prevents RPC dispatch until invalidation is
complete. This prevents RPC call dispatch until there are enough
send queue resources to proceed.
Still to do: If an RPC exits early (say, ^C), the reply handler has
no opportunity to perform invalidation. Currently, xprt_rdma_free()
still frees remaining RDMA resources, which could deadlock.
Additional changes are needed to handle invalidation properly in this
case.
Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Introduce a code path in the rpcrdma_reply_handler() to catch
incoming backward direction RPC calls and route them to the ULP's
backchannel server.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Backward direction RPC replies are sent via the client transport's
send_request method, the same way forward direction RPC calls are
sent.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The reply tasklet is fast, but it's single threaded. After reply
traffic saturates a single CPU, there's no more reply processing
capacity.
Replace the tasklet with a workqueue to spread reply handling across
all CPUs. This also moves RPC/RDMA reply handling out of the soft
IRQ context and into a context that allows sleeps.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Clean up: The error cases in rpcrdma_reply_handler() almost never
execute. Ensure the compiler places them out of the hot path.
No behavior change expected.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Devesh Sharma <devesh.sharma@avagotech.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
RDMA_NOMSG type calls are less efficient than RDMA_MSG. Count NOMSG
calls so administrators can tell if they happen to be used more than
expected.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Repair how rpcrdma_marshal_req() chooses which RDMA message type
to use for large non-WRITE operations so that it picks RDMA_NOMSG
in the correct situations, and sets up the marshaling logic to
SEND only the RPC/RDMA header.
Large NFSv2 SYMLINK requests now use RDMA_NOMSG calls. The Linux NFS
server XDR decoder for NFSv2 SYMLINK does not handle having the
pathname argument arrive in a separate buffer. The decoder could be
fixed, but this is simpler and RDMA_NOMSG can be used in a variety
of other situations.
Ensure that the Linux client continues to use "RDMA_MSG + read
list" when sending large NFSv3 SYMLINK requests, which is more
efficient than using RDMA_NOMSG.
Large NFSv4 CREATE(NF4LNK) requests are changed to use "RDMA_MSG +
read list" just like NFSv3 (see Section 5 of RFC 5667). Before,
these did not work at all.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Currently xprtrdma appends an extra chunk element to the RPC/RDMA
read chunk list of each NFSv4 WRITE compound. The extra element
contains the final GETATTR operation in the compound.
The result is an extra RDMA READ operation to transfer a very short
piece of each NFS WRITE compound (typically 16 bytes). This is
inefficient.
It is also incorrect.
The client is sending the trailing GETATTR at the same Position as
the preceding WRITE data payload. Whether or not RFC 5667 allows
the GETATTR to appear in a read chunk, RFC 5666 requires that these
two separate RPC arguments appear at two distinct Positions.
It can also be argued that the GETATTR operation is not bulk data,
and therefore RFC 5667 forbids its appearance in a read chunk at
all.
Although RFC 5667 is not precise about when using a read list with
NFSv4 COMPOUND is allowed, the intent is that only data arguments
not touched by NFS (ie, read and write payloads) are to be sent
using RDMA READ or WRITE.
The NFS client constructs GETATTR arguments itself, and therefore is
required to send the trailing GETATTR operation as additional inline
content, not as a data payload.
NB: This change is not backwards compatible. Some older servers do
not accept inline content following the read list. The Linux NFS
server should handle this content correctly as of commit
a97c331f9aa9 ("svcrdma: Handle additional inline content").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Currently Linux always offers a reply chunk, even when the reply
can be sent inline (ie. is smaller than 1KB).
On the client, registering a memory region can be expensive. A
server may choose not to use the reply chunk, wasting the cost of
the registration.
This is a change only for RPC replies smaller than 1KB which the
server constructs in the RPC reply send buffer. Because the elements
of the reply must be XDR encoded, a copy-free data transfer has no
benefit in this case.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The client has been setting up a reply chunk for NFS READs that are
smaller than the inline threshold. This is not efficient: both the
server and client CPUs have to copy the reply's data payload into
and out of the memory region that is then transferred via RDMA.
Using the write list, the data payload is moved by the device and no
extra data copying is necessary.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Devesh Sharma <devesh.sharma@avagotech.com>
Reviewed-By: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
When the size of the RPC message is near the inline threshold (1KB),
the client would allow messages to be sent that were a few bytes too
large.
When marshaling RPC/RDMA requests, ensure the combined size of
RPC/RDMA header and RPC header do not exceed the inline threshold.
Endpoints typically reject RPC/RDMA messages that exceed the size
of their receive buffers.
The two server implementations I test with (Linux and Solaris) use
receive buffers that are larger than the client’s inline threshold.
Thus so far this has been benign, observed only by code inspection.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Devesh Sharma <devesh.sharma@avagotech.com>
Tested-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
RDMA_MSGP type calls insert a zero pad in the middle of the RPC
message to align the RPC request's data payload to the server's
alignment preferences. A server can then "page flip" the payload
into place to avoid a data copy in certain circumstances. However:
1. The client has to have a priori knowledge of the server's
preferred alignment
2. Requests eligible for RDMA_MSGP are requests that are small
enough to have been sent inline, and convey a data payload
at the _end_ of the RPC message
Today 1. is done with a sysctl, and is a global setting that is
copied during mount. Linux does not support CCP to query the
server's preferences (RFC 5666, Section 6).
A small-ish NFSv3 WRITE might use RDMA_MSGP, but no NFSv4
compound fits bullet 2.
Thus the Linux client currently leaves RDMA_MSGP disabled. The
Linux server handles RDMA_MSGP, but does not use any special
page flipping, so it confers no benefit.
Clean up the marshaling code by removing the logic that constructs
RDMA_MSGP type calls. This also reduces the maximum send iovec size
from four to just two elements.
/proc/sys/sunrpc/rdma_inline_write_padding is a kernel API, and
thus is left in place.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Acquiring 64 MRs in rpcrdma_buffer_get() while holding the buffer
pool lock is expensive, and unnecessary because most modern adapters
can transfer 100s of KBs of payload using just a single MR.
Instead, acquire MRs one-at-a-time as chunks are registered, and
return them to rb_mws immediately during deregistration.
Note: commit 539431a437d2 ("xprtrdma: Don't invalidate FRMRs if
registration fails") is reverted: There is now a valid case where
registration can fail (with -ENOMEM) but the QP is still in RTS.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
A posted rpcrdma_rep never has rr_func set to anything but
rpcrdma_reply_handler.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Clean up: Instead of carrying a pointer to the buffer pool and
the rpc_xprt, carry a pointer to the controlling rpcrdma_xprt.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
There is very little common processing among the different external
memory deregistration functions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
There is very little common processing among the different external
memory registration functions. Have rpcrdma_create_chunks() call
the registration method directly. This removes a stack frame and a
switch statement from the external registration path.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Commit 6ab59945f292 ("xprtrdma: Update rkeys after transport
reconnect" added logic in the ->send_request path to update the
chunk list when an RPC/RDMA request is retransmitted.
Note that rpc_xdr_encode() resets and re-encodes the entire RPC
send buffer for each retransmit of an RPC. The RPC send buffer
is not preserved from the previous transmission of an RPC.
Revert 6ab59945f292, and instead, just force each request to be
fully marshaled every time through ->send_request. This should
preserve the fix from 6ab59945f292, while also performing pullup
during retransmits.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Dan Carpenter's static checker pointed out:
net/sunrpc/xprtrdma/rpc_rdma.c:879 rpcrdma_reply_handler()
warn: can 'credits' be negative?
"credits" is defined as an int. The credits value comes from the
server as a 32-bit unsigned integer.
A malicious or broken server can plant a large unsigned integer in
that field which would result in an underflow in the following
logic, potentially triggering a deadlock of the mount point by
blocking the client from issuing more RPC requests.
net/sunrpc/xprtrdma/rpc_rdma.c:
876 credits = be32_to_cpu(headerp->rm_credit);
877 if (credits == 0)
878 credits = 1; /* don't deadlock */
879 else if (credits > r_xprt->rx_buf.rb_max_requests)
880 credits = r_xprt->rx_buf.rb_max_requests;
881
882 cwnd = xprt->cwnd;
883 xprt->cwnd = credits << RPC_CWNDSHIFT;
884 if (xprt->cwnd > cwnd)
885 xprt_release_rqst_cong(rqst->rq_task);
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: eba8ff660b2d ("xprtrdma: Move credit update to RPC . . .")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Use the new rpcrdma_alloc_regbuf() API to shrink the amount of
contiguous memory needed for a buffer pool by moving the zero
pad buffer into a regbuf.
This is for consistency with the other uses of internally
registered memory.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The rr_base field is currently the buffer where RPC replies land.
An RPC/RDMA reply header lands in this buffer. In some cases an RPC
reply header also lands in this buffer, just after the RPC/RDMA
header.
The inline threshold is an agreed-on size limit for RDMA SEND
operations that pass from server and client. The sum of the
RPC/RDMA reply header size and the RPC reply header size must be
less than this threshold.
The largest RDMA RECV that the client should have to handle is the
size of the inline threshold. The receive buffer should thus be the
size of the inline threshold, and not related to RPCRDMA_MAX_SEGS.
RPC replies received via RDMA WRITE (long replies) are caught in
rq_rcv_buf, which is the second half of the RPC send buffer. Ie,
such replies are not involved in any way with rr_base.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The rl_base field is currently the buffer where each RPC/RDMA call
header is built.
The inline threshold is an agreed-on size limit to for RDMA SEND
operations that pass between client and server. The sum of the
RPC/RDMA header size and the RPC header size must be less than or
equal to this threshold.
Increasing the r/wsize maximum will require MAX_SEGS to grow
significantly, but the inline threshold size won't change (both
sides agree on it). The server's inline threshold doesn't change.
Since an RPC/RDMA header can never be larger than the inline
threshold, make all RPC/RDMA header buffers the size of the
inline threshold.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Because internal memory registration is an expensive and synchronous
operation, xprtrdma pre-registers send and receive buffers at mount
time, and then re-uses them for each RPC.
A "hardway" allocation is a memory allocation and registration that
replaces a send buffer during the processing of an RPC. Hardway must
be done if the RPC send buffer is too small to accommodate an RPC's
call and reply headers.
For xprtrdma, each RPC send buffer is currently part of struct
rpcrdma_req so that xprt_rdma_free(), which is passed nothing but
the address of an RPC send buffer, can find its matching struct
rpcrdma_req and rpcrdma_rep quickly via container_of / offsetof.
That means that hardway currently has to replace a whole rpcrmda_req
when it replaces an RPC send buffer. This is often a fairly hefty
chunk of contiguous memory due to the size of the rl_segments array
and the fact that both the send and receive buffers are part of
struct rpcrdma_req.
Some obscure re-use of fields in rpcrdma_req is done so that
xprt_rdma_free() can detect replaced rpcrdma_req structs, and
restore the original.
This commit breaks apart the RPC send buffer and struct rpcrdma_req
so that increasing the size of the rl_segments array does not change
the alignment of each RPC send buffer. (Increasing rl_segments is
needed to bump up the maximum r/wsize for NFS/RDMA).
This change opens up some interesting possibilities for improving
the design of xprt_rdma_allocate().
xprt_rdma_allocate() is now the one place where RPC send buffers
are allocated or re-allocated, and they are now always left in place
by xprt_rdma_free().
A large re-allocation that includes both the rl_segments array and
the RPC send buffer is no longer needed. Send buffer re-allocation
becomes quite rare. Good send buffer alignment is guaranteed no
matter what the size of the rl_segments array is.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Clean up: The rep_func field always refers to rpcrdma_conn_func().
rep_func should have been removed by commit b45ccfd25d50 ("xprtrdma:
Remove MEMWINDOWS registration modes").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Reduce work in the receive CQ handler, which can be run at hardware
interrupt level, by moving the RPC/RDMA credit update logic to the
RPC reply handler.
This has some additional benefits: More header sanity checking is
done before trusting the incoming credit value, and the receive CQ
handler no longer touches the RPC/RDMA header (the CPU stalls while
waiting for the header contents to be brought into the cache).
This further extends work begun by commit e7ce710a8802 ("xprtrdma:
Avoid deadlock when credit window is reset").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
