summaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)Author
2022-07-15wifi: mac80211: rx: accept link-addressed framesJohannes Berg
When checking whether or not to accept a frame in RX, take into account the configured link addresses. Also look up the link station correctly. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: consistently use sdata_dereference()Johannes Berg
Instead of open-coding it, use sdata_dereference(). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: fix mesh airtime link metric estimatingAditya Kumar Singh
ieee80211s_update_metric function uses sta_set_rate_info_tx function to get struct rate_info data from ieee80211_tx_rate struct, present in ieee80211_sta->deflink.tx_stats. However, drivers can skip tx rate calculation by setting rate idx as -1. Such drivers provides rate_info directly and hence ieee80211s metric is updated incorrectly since ieee80211_tx_rate has inconsistent data. Add fix to use rate_info directly if present instead of sta_set_rate_info_tx for updating ieee80211s metric. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://lore.kernel.org/r/20220701133611.544-1-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: make 4addr null frames using min_rate for WDSLian Chen
WDS needs 4addr packets to trigger AP for wlan0.sta creation. However, the 4addr null frame is sent at a high rate so that sometimes the AP can't receive it. Switch to using min rate. Signed-off-by: Lian Chen <lian.chen@mediatek.com> Link: https://lore.kernel.org/r/20220714091636.59107-1-lian.chen@mediatek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: exclude multicast packets from AQL pending airtimeFelix Fietkau
In AP mode, multicast traffic is handled very differently from normal traffic, especially if at least one client is in powersave mode. This means that multicast packets can be buffered a lot longer than normal unicast packets, and can eat up the AQL budget very quickly because of the low data rate. Along with the recent change to maintain a global PHY AQL limit, this can lead to significant latency spikes for unicast traffic. Since queueing multicast to hardware is currently not constrained by AQL limits anyway, let's just exclude it from the AQL pending airtime calculation entirely. Fixes: 8e4bac067105 ("wifi: mac80211: add a per-PHY AQL limit to improve fairness") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20220713083444.86129-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/net/sock.h 310731e2f161 ("net: Fix data-races around sysctl_mem.") e70f3c701276 ("Revert "net: set SK_MEM_QUANTUM to 4096"") https://lore.kernel.org/all/20220711120211.7c8b7cba@canb.auug.org.au/ net/ipv4/fib_semantics.c 747c14307214 ("ip: fix dflt addr selection for connected nexthop") d62607c3fe45 ("net: rename reference+tracking helpers") net/tls/tls.h include/net/tls.h 3d8c51b25a23 ("net/tls: Check for errors in tls_device_init") 587903142308 ("tls: create an internal header") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11wifi: mac80211: fix queue selection for mesh/OCB interfacesFelix Fietkau
When using iTXQ, the code assumes that there is only one vif queue for broadcast packets, using the BE queue. Allowing non-BE queue marking violates that assumption and txq->ac == skb_queue_mapping is no longer guaranteed. This can cause issues with queue handling in the driver and also causes issues with the recent ATF change, resulting in an AQL underflow warning. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20220702145227.39356-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-11wifi: mac80211: Use the bitmap API to allocate bitmapsChristophe JAILLET
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them. It is less verbose and it improves the semantic. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/dfb438a6a199ee4c95081fa01bd758fd30e50931.1656962156.git.christophe.jaillet@wanadoo.fr Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-11wifi: mac80211: fix center freq calculation in ieee80211_chandef_downgradeMeiChia Chiu
When mac80211 downgrades working bandwidth, the center_freq and center_freq1 need to be recalculated. There is a typo in the case of downgrading bandwidth from 320MHz to 160MHz which would cause a wrong frequency value. Reviewed-by: Money Wang <Money.Wang@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Link: https://lore.kernel.org/r/20220708095823.12959-1-MeiChia.Chiu@mediatek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-01wifi: mac80211: properly skip link info driver updateJohannes Berg
If the interface isn't (yet) added to the driver, skip the link info update. This was previously done for the BSS info changes, but I forgot to copy the same check here. Fixes: 7b7090b4c6a9 ("wifi: mac80211: split bss_info_changed method") Reported-by: syzbot+bce2ca140cc00578ed07@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-01wifi: mac80211: only accumulate airtime deficit for active clientsFelix Fietkau
When a client does not generate any local tx activity, accumulating airtime deficit for the round-robin scheduler can be harmful. If this goes on for too long, the deficit could grow quite large, which might cause unreasonable initial latency once the client becomes active Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://lore.kernel.org/r/20220625212411.36675-7-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-01wifi: mac80211: add debugfs file to display per-phy AQL pending airtimeFelix Fietkau
Now that the global pending airtime is more relevant for airtime fairness, it makes sense to make it accessible via debugfs for debugging Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://lore.kernel.org/r/20220625212411.36675-6-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-01wifi: mac80211: add a per-PHY AQL limit to improve fairnessFelix Fietkau
In order to maintain fairness, the amount of queueing needs to be limited beyond the simple per-station AQL budget, otherwise the driver can simply repeatedly do scheduling rounds until all queues that have not used their AQL budget become eligble. To be conservative, use the high AQL limit for the first txq and add half of the low AQL for each subsequent queue. Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://lore.kernel.org/r/20220625212411.36675-5-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-01wifi: mac80211: keep recently active tx queues in scheduling listFelix Fietkau
This allows proper deficit accounting to ensure that they don't carry their deficit until the next time they become active Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://lore.kernel.org/r/20220625212411.36675-4-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-01wifi: mac80211: consider aql_tx_pending when checking airtime deficitFelix Fietkau
When queueing packets for a station, deficit only gets added once the packets have been transmitted, which could be much later. During that time, a lot of temporary unfairness could happen, which could lead to bursty behavior. Fix this by subtracting the aql_tx_pending when checking the deficit in tx scheduling. Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://lore.kernel.org/r/20220625212411.36675-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-01wifi: mac80211: make sta airtime deficit field s32 instead of s64Felix Fietkau
32 bit is more than enough range for the airtime deficit Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://lore.kernel.org/r/20220625212411.36675-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-01wifi: mac80211: switch airtime fairness back to deficit round-robin schedulingFelix Fietkau
This reverts commits 6a789ba679d652587532cec2a0e0274fda172f3b and 2433647bc8d983a543e7d31b41ca2de1c7e2c198. The virtual time scheduler code has a number of issues: - queues slowed down by hardware/firmware powersave handling were not properly handled. - on ath10k in push-pull mode, tx queues that the driver tries to pull from were starved, causing excessive latency - delay between tx enqueue and reported airtime use were causing excessively bursty tx behavior The bursty behavior may also be present on the round-robin scheduler, but there it is much easier to fix without introducing additional regressions Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://lore.kernel.org/r/20220625212411.36675-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-01wifi: mac80211: sta_info: fix a missing kernel-doc struct elementMauro Carvalho Chehab
struct link_sta_info has now a cur_max_bandwidth data: net/mac80211/sta_info.h:569: warning: Function parameter or member 'cur_max_bandwidth' not described in 'link_sta_info' Copy the meaning from struct sta_info, documenting it. Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Link: https://lore.kernel.org/r/37d898634bb30776442a33833c48cbb21c90ecc6.1656409369.git.mchehab@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-29wifi: mac80211: do not wake queues on a vif that is being stoppedFelix Fietkau
When a vif is being removed and sdata->bss is cleared, __ieee80211_wake_txqs can still be called on it, which crashes as soon as sdata->bss is being dereferenced. To fix this properly, check for SDATA_STATE_RUNNING before waking queues, and take the fq lock when setting it (to ensure that __ieee80211_wake_txqs observes the change when running on a different CPU) Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@kernel.org> Link: https://lore.kernel.org/r/20220531190824.60019-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-29wifi: mac80211: check skb_shared in ieee80211_8023_xmit()Ryder Lee
Add a missing skb_shared check into 802.3 path to prevent potential use-after-free from happening. This also uses skb_share_check() instead of open-coding in tx path. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Link: https://lore.kernel.org/r/e7a73aaf7742b17e43421c56625646dfc5c4d2cb.1653571902.git.ryder.lee@mediatek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-29wifi: mac80211: add gfp_t parameter to ieeee80211_obss_color_collision_notifyLorenzo Bianconi
Introduce the capability to specify gfp_t parameter to ieeee80211_obss_color_collision_notify routine since it runs in interrupt context in ieee80211_rx_check_bss_color_collision(). Fixes: 6d945a33f2b0a ("mac80211: introduce BSS color collision detection") Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/02c990fb3fbd929c8548a656477d20d6c0427a13.1655419135.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: set STA deflink addressesJohannes Berg
We should set the STA deflink addresses in case no link is really added. Fixes: 046d2e7c50e3 ("mac80211: prepare sta handling for MLO support") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: maintain link-sta hash tableJohannes Berg
Maintain a hash table of link-sta addresses so we can find them for management frames etc. where addresses haven't been replaced by the drivers to the MLD address yet. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: RCU-ify link STA pointersJohannes Berg
We need to be able to access these in a race-free way under traffic while adding/removing them, so RCU-ify the pointers. This requires passing a link_sta to a lot of functions so we don't have to do the RCU handling everywhere. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: ethtool: use deflink for nowJohannes Berg
Hardcoding link[0] is more confusing than using deflink, so use deflink for now, which requires making the macro a bit safer. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: move ieee80211_bssid_match() functionJohannes Berg
This is only used in rx.c, so move it into the file. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: return a beacon for a specific linkShaul Triebitz
Pass the link id through to the get_beacon and return the beacon for a specific link id. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: pass the link id in start/stop apShaul Triebitz
In start_ap and stop_ap mac80211 callbacks pass the link_id to the drivers. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: use link in start/stop apShaul Triebitz
Use link and link_conf according to the link_id provided by cfg in start_ap/stop_ap and change_beacon. Also use them in the functions called by them. Note that for a non MLD device, the link_id is 0, and link[0] and link_conf[0] equal to deflink and bss_conf respectively (what was there before). Also, call vif_info_change for BSS related changes (SSID), and link_info_change for LINK related changes (instead of the legacy bss_info_change). Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: implement add/del interface link callbacksJohannes Berg
When a link is added or removed via nl80211, these are called. Implement them so we don't have to check in all the different per-link commands whether we've already created the necessary datastructures. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: add sta link addition/removalJohannes Berg
Add the necessary infrastructure, including a new driver method, to add/remove links to/from a station. To do this, refactor the link alloc/free a bit, splitting that so we can do it without linking them, to handle failures better. Note that a station entry must be created representing an MLD or a non-MLD STA, it cannot change between the two. When representing an MLD, the 'deflink' is used for the first link, which might be removed later, in which case the memory isn't reused. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: add MLO link ID to TX frame metadataJohannes Berg
Take a few bits out of the control.flags to add the link ID to TX frame metadata, so drivers don't need to look it up by the address themselves. Implement that lookup where it's needed, for internal frame TX, and set it to "unspecified" for data transmissions. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: remove band from TX info in MLOJohannes Berg
If the interface is an MLD, then we don't know which band the frame will be transmitted on, and we don't know how to look up the band. Set the band information to zero in that case, the driver cannot rely on it anyway. No longer inline ieee80211_tx_skb_tid() since it's even bigger now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: add vif link addition/removalJohannes Berg
Add the necessary infrastructure, including a new driver method, to add/remove links to/from an interface. Also add the missing link address to bss_conf (which we use as link_conf too), and fill it, in station mode for now just randomly, in AP mode we get the address from cfg80211 since the link must be created with an address first. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: ignore IEEE80211_CONF_CHANGE_SMPS in chanctx modeJohannes Berg
When channel contexts are used, IEEE80211_CONF_CHANGE_SMPS doesn't make sense and doesn't apply (which is documented). Mask it in this case. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: tx: simplify chanctx_conf handlingJohannes Berg
In ieee80211_build_hdr() we do the same thing for all interface types except for AP_VLAN, but we can simplify the code by pulling the common thing in front of the switch and overriding it for AP_VLAN. This will also simplify the code for MLD here later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: status: look up band only where neededJohannes Berg
For MLD, we might eventually not really know the band on status, but some code assumes it's there. Move the sband lookup deep to the code that actually needs it, to make it clear where exactly it's needed and for what purposes. For rate control, at least initially we won't support it in MLO, so that won't be an issue. For TX monitoring, we may have to elide the rate and/or rely on ieee80211_tx_status_ext() for rate information. This also simplifies the function prototypes. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: sort trace.h fileJohannes Berg
This used to be sorted by driver methods, APIs and internal functions, but got added to in the wrong sections. Fix that by ordering the file properly again. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: correct link config data in tracingJohannes Berg
We need to no longer use bss_conf here, but the per-link data. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: make ieee80211_he_cap_ie_to_sta_he_cap() MLO-awareJohannes Berg
Add the link_id parameter and adjust the code accordingly. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: make some SMPS code MLD-awareJohannes Berg
Start making some SMPS related code MLD-aware. This isn't really done yet, but again cuts down our 'deflink' reliance. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: HT: make ieee80211_ht_cap_ie_to_sta_ht_cap() MLO-awareJohannes Berg
Update ieee80211_ht_cap_ie_to_sta_ht_cap() to handle per-link data. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: add link_id to eht.c code for MLOJohannes Berg
Update the code in eht.c and add the link_id parameter where necessary. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: add link_id to vht.c code for MLOJohannes Berg
Update the code in vht.c and add the link_id parameter where necessary. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: refactor some link setup codeJohannes Berg
We don't need to setup lists and work structs every time we switch the interface type, factor that out into a new ieee80211_link_init() function and use it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: validate some driver features for MLOJohannes Berg
If MLO is enabled by the driver then validate a set of capabilities that mac80211 will initially not support in MLO. This might change if features are implemented. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: use IEEE80211_MLD_MAX_NUM_LINKSJohannes Berg
Remove MAX_STA_LINKS and use IEEE80211_MLD_MAX_NUM_LINKS instead to unify between the station and other data structures. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: refactor some sta_info link handlingJohannes Berg
Refactor the code a bit to initialize a link belonging to a station, and (later) free all allocated links. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: remove sta_info_tx_streams()Johannes Berg
The function is unused since commit 52b4810bed83 ("mac80211: Remove support for changing AP SMPS mode") so we can just remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: make channel context code MLO-awareJohannes Berg
Make the channel context code MLO aware, along with some functions that it uses, so that the chan.c file is now MLD-clean and no longer uses deflink/bss_conf/etc. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 02:27:49 +0000