summaryrefslogtreecommitdiff
path: root/net/bluetooth/hci_sync.c
AgeCommit message (Collapse)Author
2022-01-10Bluetooth: hci_sync: Fix compilation warningLuiz Augusto von Dentz
This fixes the following warning: net/bluetooth/hci_sync.c:5143:5: warning: no previous prototype for ‘hci_le_ext_create_conn_sync’ [-Wmissing-prototypes] Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-22Bluetooth: MGMT: Fix LE simultaneous roles UUID if not supportedLuiz Augusto von Dentz
If controller/driver don't support LE simultaneous roles its UUID shall be omitted when responding to MGMT_OP_READ_EXP_FEATURES_INFO. This also rework the support introducing HCI_LE_SIMULTANEOUS_ROLES flag so it can be detected when userspace wants to use or not. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-22Bluetooth: hci_sync: Add check simultaneous roles supportLuiz Augusto von Dentz
This attempts to check if the controller can act as both central and peripheral simultaneously and in case it does skip suspending advertising or in case of directed advertising don't fail if scanning. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-22Bluetooth: hci_sync: Wait for proper events when connecting LELuiz Augusto von Dentz
When using HCI_OP_LE_CREATE_CONN wait for HCI_EV_LE_CONN_COMPLETE before completing it and for HCI_OP_LE_EXT_CREATE_CONN wait for HCI_EV_LE_ENHANCED_CONN_COMPLETE before resuming advertising. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-22Bluetooth: hci_sync: Add support for waiting specific LE subeventsLuiz Augusto von Dentz
This adds support for waiting for specific LE subevents instead of command status which may only indicate that the commands is in progress and a different event is used to complete the operation. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-22Bluetooth: hci_sync: Add hci_le_create_conn_syncLuiz Augusto von Dentz
This adds hci_le_create_conn_sync and make hci_le_connect use it instead of queueing multiple commands which may conflict with the likes of hci_update_passive_scan which uses hci_cmd_sync_queue. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-22Bluetooth: hci_sync: Push sync command cancellation to workqueueBenjamin Berg
syzbot reported that hci_cmd_sync_cancel may sleep from the wrong context. To avoid this, create a new work item that pushes the relevant parts into a different context. Note that we keep the old implementation with the name __hci_cmd_sync_cancel as the sleeping behaviour is desired in some cases. Reported-and-tested-by: syzbot+485cc00ea7cf41dfdbf1@syzkaller.appspotmail.com Fixes: c97a747efc93 ("Bluetooth: btusb: Cancel sync commands for certain URB errors") Signed-off-by: Benjamin Berg <bberg@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-21Bluetooth: hci_sync: Fix not always pausing advertising when necessaryLuiz Augusto von Dentz
hci_pause_advertising_sync shall always pause advertising until hci_resume_advertising_sync but instance 0x00 doesn't count in adv_instance_cnt so it was causing it to be skipped. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-07Bluetooth: hci_sync: Set Privacy Mode when updating the resolving listLuiz Augusto von Dentz
This adds support for Set Privacy Mode when updating the resolving list when HCI_CONN_FLAG_DEVICE_PRIVACY so the controller shall use Device Mode for devices programmed in the resolving list, Device Mode is actually required when the remote device are not able to use RPA as otherwise the default mode is Network Privacy Mode in which only allows RPAs thus the controller would filter out advertisement using identity addresses for which there is an IRK. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-07Bluetooth: hci_core: Rework hci_conn_params flagsLuiz Augusto von Dentz
This reworks hci_conn_params flags to use bitmap_* helpers and add support for setting the supported flags in hdev->conn_flags so it can easily be accessed. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-07Bluetooth: add quirk disabling LE Read Transmit PowerAditya Garg
Some devices have a bug causing them to not work if they query LE tx power on startup. Thus we add a quirk in order to not query it and default min/max tx power values to HCI_TX_POWER_INVALID. Signed-off-by: Aditya Garg <gargaditya08@live.com> Reported-by: Orlando Chamberlain <redecorating@protonmail.com> Tested-by: Orlando Chamberlain <redecorating@protonmail.com> Link: https://lore.kernel.org/r/4970a940-211b-25d6-edab-21a815313954@protonmail.com Fixes: 7c395ea521e6 ("Bluetooth: Query LE tx power on startup") Cc: stable@vger.kernel.org Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-03Bluetooth: Add hci_cmd_sync_cancel to public APIBenjamin Berg
After transfer errors it makes sense to cancel an ongoing synchronous command that cannot complete anymore. To permit this, export the old hci_req_sync_cancel function as hci_cmd_sync_cancel in the API. Signed-off-by: Benjamin Berg <bberg@redhat.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-11-16Bluetooth: hci_sync: Convert MGMT_OP_SET_CONNECTABLE to use cmd_syncLuiz Augusto von Dentz
This makes MGMT_OP_SET_CONNEABLE use hci_cmd_sync_queue instead of use a dedicated connetable_update work. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-11-16Bluetooth: hci_sync: Convert MGMT_OP_SET_DISCOVERABLE to use cmd_syncLuiz Augusto von Dentz
This makes MGMT_OP_SET_DISCOVERABLE use hci_cmd_sync_queue instead of use a dedicated discoverable_update work. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-11-16Bluetooth: Don't initialize msft/aosp when using user channelJesse Melhuish
A race condition is triggered when usermode control is given to userspace before the kernel's MSFT query responds, resulting in an unexpected response to userspace's reset command. Issue can be observed in btmon: < HCI Command: Vendor (0x3f|0x001e) plen 2 #3 [hci0] 05 01 .. @ USER Open: bt_stack_manage (privileged) version 2.22 {0x0002} [hci0] < HCI Command: Reset (0x03|0x0003) plen 0 #4 [hci0] > HCI Event: Command Complete (0x0e) plen 5 #5 [hci0] Vendor (0x3f|0x001e) ncmd 1 Status: Command Disallowed (0x0c) 05 . > HCI Event: Command Complete (0x0e) plen 4 #6 [hci0] Reset (0x03|0x0003) ncmd 2 Status: Success (0x00) Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Jesse Melhuish <melhuishj@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-11-02Bluetooth: hci_sync: Fix not setting adv set durationLuiz Augusto von Dentz
10bbffa3e88e attempted to fix the use of rotation duration as advertising duration but it didn't change the if condition which still uses the duration instead of the timeout. Fixes: 10bbffa3e88e ("Bluetooth: Fix using advertising instance duration as timeout") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-11-01Bluetooth: hci_sync: Fix missing static warningsLuiz Augusto von Dentz
This fixes the following warnings: >> net/bluetooth/hci_sync.c:1333:5: warning: no previous prototype for 'hci_scan_disable_sync' [-Wmissing-prototypes] 1333 | int hci_scan_disable_sync(struct hci_dev *hdev, bool rpa_le_conn) | ^~~~~~~~~~~~~~~~~~~~~ >> net/bluetooth/hci_sync.c:1762:5: warning: no previous prototype for 'hci_passive_scan_sync' [-Wmissing-prototypes] 1762 | int hci_passive_scan_sync(struct hci_dev *hdev) | ^~~~~~~~~~~~~~~~~~~~~ Fixes: e8907f76544f ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 3") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Rework hci_suspend_notifierLuiz Augusto von Dentz
This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Rework init stagesLuiz Augusto von Dentz
This moves the init stages to use the hci_sync infra and in addition to that have the stages as function tables so it is easier to change the command sequence. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_SSPBrian Gix
mgmt-tester paths: Set SSP on - Success 2 Set Device ID - SSP off and Power on Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_SET_LOCAL_NAMEBrian Gix
Uses existing *_sync functions, but made hci_update_name_sync non-static. mgmt-test paths: Set Advertising on - Local name 1 Set Advertising on - Name + Appear 1 Set Local Name - Success 1 Set Local Name - Success 2 Set Local Name - Success 3 Add Advertising - Success (Empty ScRsp) Add Advertising - Success (Complete name) Add Advertising - Success (Shortened name) Add Advertising - Success (Short name) Add Advertising - Success (Name + data) Add Advertising - Invalid Params (Name + data) Add Advertising - Success (Name+data+appear) Read Ext Controller Info 3 Read Ext Controller Info 4 Read Ext Controller Info 5 Add Ext Advertising - Success (Empty ScRsp) Add Ext Advertising - Success (Complete name) Add Ext Advertising - Success (Shortened name) Add Ext Advertising - Success (Short name) Add Ext Advertising - Success (Name + data) Add Ext Advertising - Invalid Params (Name + data) Add Ext Advertising - Success (Name+data+appear) Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_READ_LOCAL_OOB_DATABrian Gix
New functions: hci_read_local_oob_data_sync This function requires all of the data from the cmd cmplt event to be passed up to the caller via the skb. mgmt-tester paths: Read Local OOB Data - Not powered Read Local OOB Data - Legacy pairing Read Local OOB Data - Success SSP Read Local OOB Data - Success SC Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_SET_LEBrian Gix
Uses: hci_disable_advertising_sync hci_remove_ext_adv_instance_sync hci_write_le_host_supported_sync hci_setup_ext_adv_instance_sync hci_update_scan_rsp_data_sync Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_GET_CLOCK_INFOBrian Gix
Synchronous version of MGMT_OP_GET_CLOCK_INFO. Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_SET_SECURE_CONNBrian Gix
Synchronous version of MGMT_OP_SET_SECURE_CONN. Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_GET_CONN_INFOBrian Gix
Synchronous version of MGMT_OP_GET_CONN_INFO Implements: hci_read_rssi_sync hci_read_tx_power_sync Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Enable synch'd set_bredrBrian Gix
Uses previously written: hci_write_fast_connectable_sync hci_update_scan_sync hci_update_adv_data_sync Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_SET_FAST_CONNECTABLEBrian Gix
This creates a synchronized Write Fast Connectable call and attaches it to the MGMT_OP_SET_FAST_CONNECTABLE management opcode. Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERYLuiz Augusto von Dentz
This make use of hci_cmd_sync_queue for MGMT_OP_START_DISCOVERY, MGMT_OP_START_SERVICE_DISCOVERY and MGMT_OP_STOP_DISCOVERY to use hci_cmd_sync_queue so they no longer depend on hdev->discov_update work to send any commands. Tested with: tools/mgmt-tester -s "Start Discovery" Test Summary ------------ Start Discovery - Not powered 1 Passed Start Discovery - Invalid parameters 1 Passed Start Discovery - Not supported 1 Passed Start Discovery - Success 1 Passed Start Discovery - Success 2 Passed Start Discovery - Power Off 1 Passed Start Discovery BREDR LE - (Ext Scan Enable) Passed Start Discovery LE - (Ext Scan Enable) Passed Start Discovery LE - (Ext Scan Param) Passed Start Discovery - (2m, Scan Param) Passed Start Discovery - (coded, Scan Param) Passed Start Discovery - (1m, 2m, coded, Scan Param) Passed LL Privacy - Start Discovery 1 (Disable RL) Passed LL Privacy - Start Discovery 2 (Disable RL) Passed Total: 14, Passed: 14 (100.0%), Failed: 0, Not Run: 0 tools/mgmt-tester -s "Start Service" Test Summary ------------ Start Service Discovery - Not powered 1 Passed Start Service Discovery - Invalid parameters 1 Passed Start Service Discovery - Not supported 1 Passed Start Service Discovery - Success 1 Passed Start Service Discovery - Success 2 Passed Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0 tools/mgmt-tester -s "Stop Discovery" Test Summary ------------ Stop Discovery - Success 1 Passed Stop Discovery - BR/EDR (Inquiry) Success 1 Passed Stop Discovery - Rejected 1 Passed Stop Discovery - Invalid parameters 1 Passed Stop Discovery - (Ext Scan Disable) Passed Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_SET_POWEREDLuiz Augusto von Dentz
This make use of hci_cmd_sync_queue when MGMT_SET_POWERED is used so all commands are run within hdev->cmd_sync_work instead of hdev->power_on_work and hdev->power_off_work. In addition to that the power on sequence now takes into account if local IRK needs to be programmed in the resolving list. Tested with: tools/mgmt-tester -s "Set powered" Test Summary ------------ Set powered on - Success Passed Set powered on - Invalid parameters 1 Passed Set powered on - Invalid parameters 2 Passed Set powered on - Invalid parameters 3 Passed Set powered on - Invalid index Passed Set powered on - Privacy and Advertising Passed Set powered off - Success Passed Set powered off - Class of Device Passed Set powered off - Invalid parameters 1 Passed Set powered off - Invalid parameters 2 Passed Set powered off - Invalid parameters 3 Passed Total: 11, Passed: 11 (100.0%), Failed: 0, Not Run: 0 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Rework background scanLuiz Augusto von Dentz
This replaces the use of hci_update_background_scan with hci_update_passive_scan which runs from cmd_work_sync and deal properly with resolving list when LL privacy is enabled. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Enable advertising when LL privacy is enabledLuiz Augusto von Dentz
This enables advertising when LL privacy is enabled and changes the command sequence when resolving list is updated to also account for when advertising is enabled using the following sequence: If there are devices to scan: Disable Scanning -> Update Accept List -> use_ll_privacy((Disable Advertising) -> Disable Resolving List -> Update Resolving List -> Enable Resolving List -> (Enable Advertising)) -> Enable Scanning Otherwise: Disable Scanning Errors during the Update Accept List stage are handled gracefully by restoring any previous state (e.g. advertising) and disabling the use of accept list as either accept list or resolving list could not be updated. Tested with: mgmt-tester -s "LL Privacy" Test Summary ------------ LL Privacy - Add Device 1 (Add to WL) Passed LL Privacy - Add Device 2 (Add to RL) Passed LL Privacy - Add Device 3 (Enable RL) Passed LL Privacy - Add Device 4 (2 Devices to WL) Passed LL Privacy - Add Device 5 (2 Devices to RL) Passed LL Privacy - Add Device 6 (RL is full) Passed LL Privacy - Add Device 7 (WL is full) Passed LL Privacy - Add Device 8 (Disable Adv) Passed LL Privacy - Add Device 9 (Multi Adv) Passed LL Privacy - Add Device 10 (Multi Dev and Multi Adv) Passed LL Privacy - Remove Device 1 (Remove from WL) Passed LL Privacy - Remove Device 2 (Remove from RL) Passed LL Privacy - Remove Device 3 (Disable RL) Passed LL Privacy - Remove Device 4 (Disable Adv) Passed LL Privacy - Remove Device 5 (Multi Adv) Passed LL Privacy - Start Discovery 1 (Disable RL) Passed LL Privacy - Start Discovery 2 (Disable RL) Passed Total: 18, Passed: 18 (100.0%), Failed: 0, Not Run: 0 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 3Luiz Augusto von Dentz
This make use of hci_cmd_sync_queue for the following MGMT commands: Add Device Remove Device Tested with: mgmt-tester -s "Add Device" Test Summary ------------ Add Device - Invalid Params 1 Passed Add Device - Invalid Params 2 Passed Add Device - Invalid Params 3 Passed Add Device - Invalid Params 4 Passed Add Device - Success 1 Passed Add Device - Success 2 Passed Add Device - Success 3 Passed Add Device - Success 4 Passed Add Device - Success 5 Passed Add Device - Success 6 - Add to whitelist Passed Add Device - Success 7 - Add to resolv list Passed Add Device - Success 8 - Enable resolv list Passed Total: 12, Passed: 12 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.209 seconds mgmt-tester -s "Remove Device" Test Summary ------------ Remove Device - Invalid Params 1 Passed Remove Device - Invalid Params 2 Passed Remove Device - Invalid Params 3 Passed Remove Device - Success 1 Passed Remove Device - Success 2 Passed Remove Device - Success 3 Passed Remove Device - Success 4 Passed Remove Device - Success 5 Passed Remove Device - Success 6 - All Devices Passed Remove Device - Success 7 - Remove from whitelist Passed Remove Device - Success 8 - Remove from resolv list Passed Total: 11, Passed: 11 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 4.26 seconds Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 2Luiz Augusto von Dentz
This make use of hci_cmd_sync_queue for the following MGMT commands: Add Advertising Remove Advertising Add Extended Advertising Parameters Add Extended Advertising Data mgmt-tester -s "Add Advertising" Test Summary ------------ Add Advertising - Failure: LE off Passed Add Advertising - Invalid Params 1 (AD too long) Passed Add Advertising - Invalid Params 2 (Malformed len) Passed Add Advertising - Invalid Params 3 (Malformed len) Passed Add Advertising - Invalid Params 4 (Malformed len) Passed Add Advertising - Invalid Params 5 (AD too long) Passed Add Advertising - Invalid Params 6 (ScRsp too long) Passed Add Advertising - Invalid Params 7 (Malformed len) Passed Add Advertising - Invalid Params 8 (Malformed len) Passed Add Advertising - Invalid Params 9 (Malformed len) Passed Add Advertising - Invalid Params 10 (ScRsp too long) Passed Add Advertising - Rejected (Timeout, !Powered) Passed Add Advertising - Success 1 (Powered, Add Adv Inst) Passed Add Advertising - Success 2 (!Powered, Add Adv Inst) Passed Add Advertising - Success 3 (!Powered, Adv Enable) Passed Add Advertising - Success 4 (Set Adv on override) Passed Add Advertising - Success 5 (Set Adv off override) Passed Add Advertising - Success 6 (Scan Rsp Dta, Adv ok) Passed Add Advertising - Success 7 (Scan Rsp Dta, Scan ok) Passed Add Advertising - Success 8 (Connectable Flag) Passed Add Advertising - Success 9 (General Discov Flag) Passed Add Advertising - Success 10 (Limited Discov Flag) Passed Add Advertising - Success 11 (Managed Flags) Passed Add Advertising - Success 12 (TX Power Flag) Passed Add Advertising - Success 13 (ADV_SCAN_IND) Passed Add Advertising - Success 14 (ADV_NONCONN_IND) Passed Add Advertising - Success 15 (ADV_IND) Passed Add Advertising - Success 16 (Connectable -> on) Passed Add Advertising - Success 17 (Connectable -> off) Passed Add Advertising - Success 18 (Power -> off, Remove) Passed Add Advertising - Success 19 (Power -> off, Keep) Passed Add Advertising - Success 20 (Add Adv override) Passed Add Advertising - Success 21 (Timeout expires) Passed Add Advertising - Success 22 (LE -> off, Remove) Passed Add Advertising - Success (Empty ScRsp) Passed Add Advertising - Success (ScRsp only) Passed Add Advertising - Invalid Params (ScRsp too long) Passed Add Advertising - Success (ScRsp appear) Passed Add Advertising - Invalid Params (ScRsp appear long) Passed Add Advertising - Success (Appear is null) Passed Add Advertising - Success (Name is null) Passed Add Advertising - Success (Complete name) Passed Add Advertising - Success (Shortened name) Passed Add Advertising - Success (Short name) Passed Add Advertising - Success (Name + data) Passed Add Advertising - Invalid Params (Name + data) Passed Add Advertising - Success (Name+data+appear) Passed Total: 47, Passed: 47 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 2.17 seconds mgmt-tester -s "Remove Advertising" Test Summary ------------ Remove Advertising - Invalid Params 1 Passed Remove Advertising - Success 1 Passed Remove Advertising - Success 2 Passed Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0585 seconds mgmt-tester -s "Ext Adv MGMT Params" Test Summary: ------------ Ext Adv MGMT Params - Unpowered Passed Ext Adv MGMT Params - Invalid parameters Passed Ext Adv MGMT Params - Success Passed Ext Adv MGMT Params - (5.0) Success Passed Total: 4, Passed: 4 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0746 seconds mgmt-tester -s "Ext Adv MGMT -" Test Summary ------------ Ext Adv MGMT - Data set without Params Passed Ext Adv MGMT - AD Data (5.0) Invalid parameters Passed Ext Adv MGMT - AD Data (5.0) Success Passed Ext Adv MGMT - AD Scan Response (5.0) Success Passed Total: 4, Passed: 4 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0805 seconds Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 1Luiz Augusto von Dentz
This make use of hci_cmd_sync_queue for the following MGMT commands: Set Device Class Set Device ID Add UUID Remove UUID tools/mgmt-tester -s "Set Device Class" Test Summary ------------ Set Device Class - Success 1 Passed Set Device Class - Success 2 Passed Set Device Class - Invalid parameters 1 Passed Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0599 seconds tools/mgmt-tester -s "Set Device ID" Test Summary ------------ Set Device ID - Success 1 Passed Set Device ID - Success 2 Passed Set Device ID - Disable Passed Set Device ID - Power off and Power on Passed Set Device ID - SSP off and Power on Passed Set Device ID - Invalid Parameter Passed Total: 6, Passed: 6 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.107 seconds tools/mgmt-tester -s "Add UUID" Test Summary ------------ Add UUID - UUID-16 1 Passed Add UUID - UUID-16 multiple 1 Passed Add UUID - UUID-16 partial 1 Passed Add UUID - UUID-32 1 Passed Add UUID - UUID-32 multiple 1 Passed Add UUID - UUID-32 partial 1 Passed Add UUID - UUID-128 1 Passed Add UUID - UUID-128 multiple 1 Passed Add UUID - UUID-128 partial 1 Passed Add UUID - UUID mix Passed Total: 10, Passed: 10 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.198 seconds tools/mgmt-tester -s "Remove UUID" Test Summary ------------ Remove UUID - Success 1 Passed Remove UUID - All UUID - Success 2 Passed Remove UUID - Power Off - Success 3 Passed Remove UUID - Power Off and On - Success 4 Passed Remove UUID - Not Exist - Invalid Params 1 Passed Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0908 seconds Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: Add helper for serialized HCI command executionMarcel Holtmann
The usage of __hci_cmd_sync() within the hdev->setup() callback allows for a nice and simple serialized execution of HCI commands. More importantly it allows for result processing before issueing the next command. With the current usage of hci_req_run() it is possible to batch up commands and execute them, but it is impossible to react to their results or errors. This is an attempt to generalize the hdev->setup() handling and provide a simple way of running multiple HCI commands from a single function context. There are multiple struct work that are decdicated to certain tasks already used right now. It is add a lot of bloat to hci_dev struct and extra handling code. So it might be possible to put all of these behind a common HCI command infrastructure and just execute the HCI commands from the same work context in a serialized fashion. For example updating the white list and resolving list can be done now without having to know the list size ahead of time. Also preparing for suspend or resume shouldn't require a state machine anymore. There are other tasks that should be simplified as well. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 19:12:04 +0000