summaryrefslogtreecommitdiff
path: root/net/bluetooth/hci_conn.c
AgeCommit message (Collapse)Author
2023-06-29Bluetooth: hci_conn: Use kmemdup() to replace kzalloc + memcpyJiapeng Chong
Use kmemdup rather than duplicating its implementation. ./net/bluetooth/hci_conn.c:1880:7-14: WARNING opportunity for kmemdup. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5597 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-29Bluetooth: ISO: Rework sync_interval to be sync_factorLuiz Augusto von Dentz
This rework sync_interval to be sync_factor as having sync_interval in the order of seconds is sometimes not disarable. Wit sync_factor the application can tell how many SDU intervals it wants to send an announcement with PA, the EA interval is set to 2 times that so a factor of 24 of BIG SDU interval of 10ms would look like the following: < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x01 Properties: 0x0000 Min advertising interval: 480.000 msec (0x0300) Max advertising interval: 480.000 msec (0x0300) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: Host has no preference (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 2M (0x02) SID: 0x00 Scan request notifications: Disabled (0x00) < HCI Command: LE Set Periodic Advertising Parameters (0x08|0x003e) plen 7 Handle: 1 Min interval: 240.00 msec (0x00c0) Max interval: 240.00 msec (0x00c0) Properties: 0x0000 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-29Bluetooth: ISO: use hci_sync for setting CIG parametersPauli Virtanen
When reconfiguring CIG after disconnection of the last CIS, LE Remove CIG shall be sent before LE Set CIG Parameters. Otherwise, it fails because CIG is in the inactive state and not configurable (Core v5.3 Vol 6 Part B Sec. 4.5.14.3). This ordering is currently wrong under suitable timing conditions, because LE Remove CIG is sent via the hci_sync queue and may be delayed, but Set CIG Parameters is via hci_send_cmd. Make the ordering well-defined by sending also Set CIG Parameters via hci_sync. Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-05Bluetooth: ISO: don't try to remove CIG if there are bound CIS leftPauli Virtanen
Consider existing BOUND & CONNECT state CIS to block CIG removal. Otherwise, under suitable timing conditions we may attempt to remove CIG while Create CIS is pending, which fails. Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-05Bluetooth: ISO: Fix CIG auto-allocation to select configurable CIGPauli Virtanen
Make CIG auto-allocation to select the first CIG_ID that is still configurable. Also use correct CIG_ID range (see Core v5.3 Vol 4 Part E Sec 7.8.97 p.2553). Previously, it would always select CIG_ID 0 regardless of anything, because cis_list with data.cis == 0xff (BT_ISO_QOS_CIS_UNSET) would not count any CIS. Since we are not adding CIS here, use find_cis instead. Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-05Bluetooth: ISO: consider right CIS when removing CIG at cleanupPauli Virtanen
When looking for CIS blocking CIG removal, consider only the CIS with the right CIG ID. Don't try to remove CIG with unset CIG ID. Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-19Bluetooth: Unlink CISes when LE disconnects in hci_conn_delRuihan Li
Currently, hci_conn_del calls hci_conn_unlink for BR/EDR, (e)SCO, and CIS connections, i.e., everything except LE connections. However, if (e)SCO connections are unlinked when BR/EDR disconnects, CIS connections should also be unlinked when LE disconnects. In terms of disconnection behavior, CIS and (e)SCO connections are not too different. One peculiarity of CIS is that when CIS connections are disconnected, the CIS handle isn't deleted, as per [BLUETOOTH CORE SPECIFICATION Version 5.4 | Vol 4, Part E] 7.1.6 Disconnect command: All SCO, eSCO, and CIS connections on a physical link should be disconnected before the ACL connection on the same physical connection is disconnected. If it does not, they will be implicitly disconnected as part of the ACL disconnection. ... Note: As specified in Section 7.7.5, on the Central, the handle for a CIS remains valid even after disconnection and, therefore, the Host can recreate a disconnected CIS at a later point in time using the same connection handle. Since hci_conn_link invokes both hci_conn_get and hci_conn_hold, hci_conn_unlink should perform both hci_conn_put and hci_conn_drop as well. However, currently it performs only hci_conn_put. This patch makes hci_conn_unlink call hci_conn_drop as well, which simplifies the logic in hci_conn_del a bit and may benefit future users of hci_conn_unlink. But it is noted that this change additionally implies that hci_conn_unlink can queue disc_work on conn itself, with the following call stack: hci_conn_unlink(conn) [conn->parent == NULL] -> hci_conn_unlink(child) [child->parent == conn] -> hci_conn_drop(child->parent) -> queue_delayed_work(&conn->disc_work) Queued disc_work after hci_conn_del can be spurious, so during the process of hci_conn_del, it is necessary to make the call to cancel_delayed_work(&conn->disc_work) after invoking hci_conn_unlink. Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn> Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-19Bluetooth: Fix UAF in hci_conn_hash_flush againRuihan Li
Commit 06149746e720 ("Bluetooth: hci_conn: Add support for linking multiple hcon") reintroduced a previously fixed bug [1] ("KASAN: slab-use-after-free Read in hci_conn_hash_flush"). This bug was originally fixed by commit 5dc7d23e167e ("Bluetooth: hci_conn: Fix possible UAF"). The hci_conn_unlink function was added to avoid invalidating the link traversal caused by successive hci_conn_del operations releasing extra connections. However, currently hci_conn_unlink itself also releases extra connections, resulted in the reintroduced bug. This patch follows a more robust solution for cleaning up all connections, by repeatedly removing the first connection until there are none left. This approach does not rely on the inner workings of hci_conn_del and ensures proper cleanup of all connections. Meanwhile, we need to make sure that hci_conn_del never fails. Indeed it doesn't, as it now always returns zero. To make this a bit clearer, this patch also changes its return type to void. Reported-by: syzbot+8bb72f86fc823817bc5d@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-bluetooth/000000000000aa920505f60d25ad@google.com/ Fixes: 06149746e720 ("Bluetooth: hci_conn: Add support for linking multiple hcon") Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn> Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-19Bluetooth: Refcnt drop must be placed last in hci_conn_unlinkRuihan Li
If hci_conn_put(conn->parent) reduces conn->parent's reference count to zero, it can immediately deallocate conn->parent. At the same time, conn->link->list has its head in conn->parent, causing use-after-free problems in the latter list_del_rcu(&conn->link->list). This problem can be easily solved by reordering the two operations, i.e., first performing the list removal with list_del_rcu and then decreasing the refcnt with hci_conn_put. Reported-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Closes: https://lore.kernel.org/linux-bluetooth/CABBYNZ+1kce8_RJrLNOXd_8=Mdpb=2bx4Nto-hFORk=qiOkoCg@mail.gmail.com/ Fixes: 06149746e720 ("Bluetooth: hci_conn: Add support for linking multiple hcon") Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-05-19Bluetooth: Fix potential double free caused by hci_conn_unlinkRuihan Li
The hci_conn_unlink function is being called by hci_conn_del, which means it should not call hci_conn_del with the input parameter conn again. If it does, conn may have already been released when hci_conn_unlink returns, leading to potential UAF and double-free issues. This patch resolves the problem by modifying hci_conn_unlink to release only conn's child links when necessary, but never release conn itself. Reported-by: syzbot+690b90b14f14f43f4688@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-bluetooth/000000000000484a8205faafe216@google.com/ Fixes: 06149746e720 ("Bluetooth: hci_conn: Add support for linking multiple hcon") Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Reported-by: syzbot+690b90b14f14f43f4688@syzkaller.appspotmail.com Reported-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Reported-by: syzbot+8bb72f86fc823817bc5d@syzkaller.appspotmail.com
2023-04-23Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHEDLuiz Augusto von Dentz
When submitting HCI_OP_LE_CREATE_CIS the code shall wait for HCI_EVT_LE_CIS_ESTABLISHED thus enforcing the serialization of HCI_OP_LE_CREATE_CIS as the Core spec does not allow to send them in parallel: BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E page 2566: If the Host issues this command before all the HCI_LE_CIS_Established events from the previous use of the command have been generated, the Controller shall return the error code Command Disallowed (0x0C). Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_conn: Fix not matching by CIS IDLuiz Augusto von Dentz
This fixes only matching CIS by address which prevents creating new hcon if upper layer is requesting a specific CIS ID. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_conn: Add support for linking multiple hconLuiz Augusto von Dentz
Since it is required for some configurations to have multiple CIS with the same peer which is now covered by iso-tester in the following test cases: ISO AC 6(i) - Success ISO AC 7(i) - Success ISO AC 8(i) - Success ISO AC 9(i) - Success ISO AC 11(i) - Success Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_conn: remove extra line in hci_le_big_create_syncIulia Tanasescu
Remove extra line setting the broadcast code parameter of the hci_cp_le_create_big struct to 0. The broadcast code is copied from the QoS struct. Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: Split bt_iso_qos into dedicated structuresIulia Tanasescu
Split bt_iso_qos into dedicated unicast and broadcast structures and add additional broadcast parameters. Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections") Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-10Bluetooth: hci_conn: Fix possible UAFLuiz Augusto von Dentz
This fixes the following trace: ================================================================== BUG: KASAN: slab-use-after-free in hci_conn_del+0xba/0x3a0 Write of size 8 at addr ffff88800208e9c8 by task iso-tester/31 CPU: 0 PID: 31 Comm: iso-tester Not tainted 6.3.0-rc2-g991aa4a69a47 #4716 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc36 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x1d/0x70 print_report+0xce/0x610 ? __virt_addr_valid+0xd4/0x150 ? hci_conn_del+0xba/0x3a0 kasan_report+0xdd/0x110 ? hci_conn_del+0xba/0x3a0 hci_conn_del+0xba/0x3a0 hci_conn_hash_flush+0xf2/0x120 hci_dev_close_sync+0x388/0x920 hci_unregister_dev+0x122/0x260 vhci_release+0x4f/0x90 __fput+0x102/0x430 task_work_run+0xf1/0x160 ? __pfx_task_work_run+0x10/0x10 ? mark_held_locks+0x24/0x90 exit_to_user_mode_prepare+0x170/0x180 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x4e/0x90 entry_SYSCALL_64_after_hwframe+0x70/0xda Fixes: 0f00cd322d22 ("Bluetooth: Free potentially unfreed SCO connection") Link: https://syzkaller.appspot.com/bug?extid=8bb72f86fc823817bc5d Cc: <stable@vger.kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-10Bluetooth: Fix printing errors if LE Connection times outLuiz Augusto von Dentz
This fixes errors like bellow when LE Connection times out since that is actually not a controller error: Bluetooth: hci0: Opcode 0x200d failed: -110 Bluetooth: hci0: request failed to create LE connection: err -110 Instead the code shall properly detect if -ETIMEDOUT is returned and send HCI_OP_LE_CREATE_CONN_CANCEL to give up on the connection. Link: https://github.com/bluez/bluez/issues/340 Fixes: 8e8b92ee60de ("Bluetooth: hci_sync: Add hci_le_create_conn_sync") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-10Bluetooth: hci_conn: Fix not cleaning up on LE Connection failureLuiz Augusto von Dentz
hci_connect_le_scan_cleanup shall always be invoked to cleanup the states and re-enable passive scanning if necessary, otherwise it may cause the pending action to stay active causing multiple attempts to connect. Fixes: 9b3628d79b46 ("Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-02-09Bluetooth: Make sure LE create conn cancel is sent when timeoutArchie Pusaka
When sending LE create conn command, we set a timer with a duration of HCI_LE_CONN_TIMEOUT before timing out and calling create_le_conn_complete. Additionally, when receiving the command complete, we also set a timer with the same duration to call le_conn_timeout. Usually the latter will be triggered first, which then sends a LE create conn cancel command. However, due to the nature of racing, it is possible for the former to be called first, thereby calling the chain hci_conn_failed -> hci_conn_del -> cancel_delayed_work, thereby preventing LE create conn cancel to be sent. In this situation, the controller will be stuck in trying the LE connection. This patch flushes le_conn_timeout on create_le_conn_complete to make sure we always send LE create connection cancel, if necessary. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Ying Hsu <yinghsu@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-02-09Bluetooth: Free potentially unfreed SCO connectionArchie Pusaka
It is possible to initiate a SCO connection while deleting the corresponding ACL connection, e.g. in below scenario: (1) < hci setup sync connect command (2) > hci disconn complete event (for the acl connection) (3) > hci command complete event (for(1), failure) When it happens, hci_cs_setup_sync_conn won't be able to obtain the reference to the SCO connection, so it will be stuck and potentially hinder subsequent connections to the same device. This patch prevents that by also deleting the SCO connection if it is still not established when the corresponding ACL connection is deleted. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Ying Hsu <yinghsu@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-02-09Bluetooth: hci_conn: Refactor hci_bind_bis() since it always succeedsKees Cook
The compiler thinks "conn" might be NULL after a call to hci_bind_bis(), which cannot happen. Avoid any confusion by just making it not return a value since it cannot fail. Fixes the warnings seen with GCC 13: In function 'arch_atomic_dec_and_test', inlined from 'atomic_dec_and_test' at ../include/linux/atomic/atomic-instrumented.h:576:9, inlined from 'hci_conn_drop' at ../include/net/bluetooth/hci_core.h:1391:6, inlined from 'hci_connect_bis' at ../net/bluetooth/hci_conn.c:2124:3: ../arch/x86/include/asm/rmwcc.h:37:9: warning: array subscript 0 is outside array bounds of 'atomic_t[0]' [-Warray-bounds=] 37 | asm volatile (fullop CC_SET(cc) \ | ^~~ ... In function 'hci_connect_bis': cc1: note: source object is likely at address zero Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections") Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: linux-bluetooth@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-01-17Bluetooth: hci_conn: Fix memory leaksZhengchao Shao
When hci_cmd_sync_queue() failed in hci_le_terminate_big() or hci_le_big_terminate(), the memory pointed by variable d is not freed, which will cause memory leak. Add release process to error path. Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: hci_conn: Fix crash on hci_create_cis_syncLuiz Augusto von Dentz
When attempting to connect multiple ISO sockets without using DEFER_SETUP may result in the following crash: BUG: KASAN: null-ptr-deref in hci_create_cis_sync+0x18b/0x2b0 Read of size 2 at addr 0000000000000036 by task kworker/u3:1/50 CPU: 0 PID: 50 Comm: kworker/u3:1 Not tainted 6.0.0-rc7-02243-gb84a13ff4eda #4373 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl+0x19/0x27 kasan_report+0xbc/0xf0 ? hci_create_cis_sync+0x18b/0x2b0 hci_create_cis_sync+0x18b/0x2b0 ? get_link_mode+0xd0/0xd0 ? __ww_mutex_lock_slowpath+0x10/0x10 ? mutex_lock+0xe0/0xe0 ? get_link_mode+0xd0/0xd0 hci_cmd_sync_work+0x111/0x190 process_one_work+0x427/0x650 worker_thread+0x87/0x750 ? process_one_work+0x650/0x650 kthread+0x14e/0x180 ? kthread_exit+0x50/0x50 ret_from_fork+0x22/0x30 </TASK> Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: Use kzalloc instead of kmalloc/memsetKang Minchul
Replace kmalloc+memset by kzalloc for better readability and simplicity. This addresses the cocci warning below: WARNING: kzalloc should be used for d, instead of kmalloc/memset Signed-off-by: Kang Minchul <tegongkang@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: Use kzalloc instead of kmalloc/memsetJiapeng Chong
Use kzalloc rather than duplicating its implementation, which makes code simple and easy to understand. ./net/bluetooth/hci_conn.c:2038:6-13: WARNING: kzalloc should be used for cp, instead of kmalloc/memset. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2406 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: hci_conn: use HCI dst_type values also for BISPauli Virtanen
For ISO BIS related functions in hci_conn.c, make dst_type values be HCI address type values, not ISO socket address type values. This makes it consistent with CIS functions. Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-11-02Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnectLuiz Augusto von Dentz
When disconnecting an ISO link the controller may not generate HCI_EV_NUM_COMP_PKTS for unacked packets which needs to be restored in hci_conn_del otherwise the host would assume they are still in use and would not be able to use all the buffers available. Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Frédéric Danis <frederic.danis@collabora.com>
2022-11-02Bluetooth: hci_conn: Fix CIS connection dst_type handlingPauli Virtanen
hci_connect_cis and iso_connect_cis call hci_bind_cis inconsistently with dst_type being either ISO socket address type or the HCI type, but these values cannot be mixed like this. Fix this by using only the HCI type. CIS connection dst_type was also not initialized in hci_bind_cis, even though it is used in hci_conn_hash_lookup_cis to find existing connections. Set the value in hci_bind_cis, so that existing CIS connections are found e.g. when doing deferred socket connections, also when dst_type is not 0 (ADDR_LE_DEV_PUBLIC). Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-08-31Bluetooth: Move hci_abort_conn to hci_conn.cBrian Gix
hci_abort_conn() is a wrapper around a number of DISCONNECT and CREATE_CONN_CANCEL commands that was being invoked from hci_request request queues, which are now deprecated. There are two versions: hci_abort_conn() which can be invoked from the hci_event thread, and hci_abort_conn_sync() which can be invoked within a hci_sync cmd chain. Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-08-25Bluetooth: Convert SCO configure_datapath to hci_syncBrian Gix
Recoding HCI cmds to offload SCO codec to use hci_sync mechanism rather than deprecated hci_request mechanism. Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-08-08Bluetooth: hci_conn: Fix updating ISO QoS PHYLuiz Augusto von Dentz
BT_ISO_QOS has different semantics when it comes to QoS PHY as it uses 0x00 to disable a direction but that value is invalid over HCI and sockets using DEFER_SETUP to connect may attempt to use hci_bind_cis multiple times in order to detect if the parameters have changed, so to fix the code will now just mirror the PHY for the parameters of HCI_OP_LE_SET_CIG_PARAMS and will not update the PHY of the socket leaving it disabled. Fixes: 26afbd826ee32 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: Add initial implementation of BIS connectionsLuiz Augusto von Dentz
This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: Add initial implementation of CIS connectionsLuiz Augusto von Dentz
This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-21Bluetooth: Use bt_status to convert from errnoLuiz Augusto von Dentz
If a command cannot be sent or there is a internal error an errno maybe set instead of a command status. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-21Bluetooth: clear the temporary linkkey in hci_conn_cleanupAlain Michaud
If a hardware error occurs and the connections are flushed without a disconnection_complete event being signaled, the temporary linkkeys are not flushed. This change ensures that any outstanding flushable linkkeys are flushed when the connection are flushed from the hash table. Additionally, this also makes use of test_and_clear_bit to avoid multiple attempts to delete the link key that's already been flushed. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-05-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/ethernet/cadence/macb_main.c 5cebb40bc955 ("net: macb: Fix PTP one step sync support") 138badbc21a0 ("net: macb: use NAPI for TX completion path") https://lore.kernel.org/all/20220523111021.31489367@canb.auug.org.au/ net/smc/af_smc.c 75c1edf23b95 ("net/smc: postpone sk_refcnt increment in connect()") 3aba103006bc ("net/smc: align the connect behaviour with TCP") https://lore.kernel.org/all/20220524114408.4bf1af38@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-23Bluetooth: hci_conn: Fix hci_connect_le_syncLuiz Augusto von Dentz
The handling of connection failures shall be handled by the request completion callback as already done by hci_cs_le_create_conn, also make sure to use hci_conn_failed instead of hci_le_conn_failed as the later don't actually call hci_conn_del to cleanup. Link: https://github.com/bluez/bluez/issues/340 Fixes: 8e8b92ee60de5 ("Bluetooth: hci_sync: Add hci_le_create_conn_sync") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-05-13Bluetooth: HCI: Add HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN quirkLuiz Augusto von Dentz
This adds HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN quirk which can be used to mark HCI_Enhanced_Setup_Synchronous_Connection as broken even if its support command bit are set since some controller report it as supported but the command don't work properly with some configurations (e.g. BT_VOICE_TRANSPARENT/mSBC). Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-04-26Bluetooth: hci_sync: Cleanup hci_conn if it cannot be abortedLuiz Augusto von Dentz
This attempts to cleanup the hci_conn if it cannot be aborted as otherwise it would likely result in having the controller and host stack out of sync with respect to connection handle. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: call hci_le_conn_failed with hdev lock in hci_le_conn_failedNiels Dossche
hci_le_conn_failed function's documentation says that the caller must hold hdev->lock. The only callsite that does not hold that lock is hci_le_conn_failed. The other 3 callsites hold the hdev->lock very locally. The solution is to hold the lock during the call to hci_le_conn_failed. Fixes: 3c857757ef6e ("Bluetooth: Add directed advertising support through connect()") Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-24Bluetooth: hci_event: Ignore multiple conn complete eventsSoenke Huster
When one of the three connection complete events is received multiple times for the same handle, the device is registered multiple times which leads to memory corruptions. Therefore, consequent events for a single connection are ignored. The conn->state can hold different values, therefore HCI_CONN_HANDLE_UNSET is introduced to identify new connections. To make sure the events do not contain this or another invalid handle HCI_CONN_HANDLE_MAX and checks are introduced. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=215497 Signed-off-by: Soenke Huster <soenke.huster@eknoes.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-12-22Bluetooth: hci_sync: Add hci_le_create_conn_syncLuiz Augusto von Dentz
This adds hci_le_create_conn_sync and make hci_le_connect use it instead of queueing multiple commands which may conflict with the likes of hci_update_passive_scan which uses hci_cmd_sync_queue. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Rework hci_suspend_notifierLuiz Augusto von Dentz
This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERYLuiz Augusto von Dentz
This make use of hci_cmd_sync_queue for MGMT_OP_START_DISCOVERY, MGMT_OP_START_SERVICE_DISCOVERY and MGMT_OP_STOP_DISCOVERY to use hci_cmd_sync_queue so they no longer depend on hdev->discov_update work to send any commands. Tested with: tools/mgmt-tester -s "Start Discovery" Test Summary ------------ Start Discovery - Not powered 1 Passed Start Discovery - Invalid parameters 1 Passed Start Discovery - Not supported 1 Passed Start Discovery - Success 1 Passed Start Discovery - Success 2 Passed Start Discovery - Power Off 1 Passed Start Discovery BREDR LE - (Ext Scan Enable) Passed Start Discovery LE - (Ext Scan Enable) Passed Start Discovery LE - (Ext Scan Param) Passed Start Discovery - (2m, Scan Param) Passed Start Discovery - (coded, Scan Param) Passed Start Discovery - (1m, 2m, coded, Scan Param) Passed LL Privacy - Start Discovery 1 (Disable RL) Passed LL Privacy - Start Discovery 2 (Disable RL) Passed Total: 14, Passed: 14 (100.0%), Failed: 0, Not Run: 0 tools/mgmt-tester -s "Start Service" Test Summary ------------ Start Service Discovery - Not powered 1 Passed Start Service Discovery - Invalid parameters 1 Passed Start Service Discovery - Not supported 1 Passed Start Service Discovery - Success 1 Passed Start Service Discovery - Success 2 Passed Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0 tools/mgmt-tester -s "Stop Discovery" Test Summary ------------ Stop Discovery - Success 1 Passed Stop Discovery - BR/EDR (Inquiry) Success 1 Passed Stop Discovery - Rejected 1 Passed Stop Discovery - Invalid parameters 1 Passed Stop Discovery - (Ext Scan Disable) Passed Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Rework background scanLuiz Augusto von Dentz
This replaces the use of hci_update_background_scan with hci_update_passive_scan which runs from cmd_work_sync and deal properly with resolving list when LL privacy is enabled. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-07Bluetooth: Add support for msbc coding formatKiran K
In Enhanced_Setup_Synchronous_Command, add support for msbc coding format Signed-off-by: Kiran K <kiran.k@intel.com> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-09-07Bluetooth: Configure codec for HFP offload use caseKiran K
For HFP offload use case, codec needs to be configured before opening SCO connection. This patch sends HCI_CONFIGURE_DATA_PATH command to configure doec before opening SCO connection. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-09-07Bluetooth: Add support for HCI_Enhanced_Setup_Synchronous_Connection commandKiran K
< HCI Command: Enhanced Setup Synchronous Connection (0x01|0x003d) plen 59 Handle: 256 Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Packet type: 0x0380 3-EV3 may not be used 2-EV5 may not be used 3-EV5 may not be used Retransmission effort: Optimize for link quality (0x02) > HCI Event: Command Status (0x0f) plen 4 Enhanced Setup Synchronous Connection (0x01|0x003d) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 Status: Success (0x00) Handle: 257 Address: CC:98:8B:92:04:FD (SONY Visual Products Inc.) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x06 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) Signed-off-by: Kiran K <kiran.k@intel.com> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-08-30Bluetooth: Fix using RPA when address has been resolvedLuiz Augusto von Dentz
When connecting to a device using an RPA if the address has been resolved by the controller (types 0x02 and 0x03) the identity address shall be used as the actual RPA in the advertisement won't be visible to the host. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language in HCI role commentsArchie Pusaka
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: master -> initiator (for smp) or central (everything else) slave -> responder (for smp) or peripheral (everything else) The #define preprocessor terms are unchanged for now to not disturb dependent APIs. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 21:02:27 +0000