| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 98c6d259319ecf6e8d027abd3f14b81324b8c0ad ]
Patch series "mm: better GUP pin lru_add_drain_all()", v2.
Series of lru_add_drain_all()-related patches, arising from recent mm/gup
migration report from Will Deacon.
This patch (of 5):
Will Deacon reports:-
When taking a longterm GUP pin via pin_user_pages(),
__gup_longterm_locked() tries to migrate target folios that should not be
longterm pinned, for example because they reside in a CMA region or
movable zone. This is done by first pinning all of the target folios
anyway, collecting all of the longterm-unpinnable target folios into a
list, dropping the pins that were just taken and finally handing the list
off to migrate_pages() for the actual migration.
It is critically important that no unexpected references are held on the
folios being migrated, otherwise the migration will fail and
pin_user_pages() will return -ENOMEM to its caller. Unfortunately, it is
relatively easy to observe migration failures when running pKVM (which
uses pin_user_pages() on crosvm's virtual address space to resolve stage-2
page faults from the guest) on a 6.15-based Pixel 6 device and this
results in the VM terminating prematurely.
In the failure case, 'crosvm' has called mlock(MLOCK_ONFAULT) on its
mapping of guest memory prior to the pinning. Subsequently, when
pin_user_pages() walks the page-table, the relevant 'pte' is not present
and so the faulting logic allocates a new folio, mlocks it with
mlock_folio() and maps it in the page-table.
Since commit 2fbb0c10d1e8 ("mm/munlock: mlock_page() munlock_page() batch
by pagevec"), mlock/munlock operations on a folio (formerly page), are
deferred. For example, mlock_folio() takes an additional reference on the
target folio before placing it into a per-cpu 'folio_batch' for later
processing by mlock_folio_batch(), which drops the refcount once the
operation is complete. Processing of the batches is coupled with the LRU
batch logic and can be forcefully drained with lru_add_drain_all() but as
long as a folio remains unprocessed on the batch, its refcount will be
elevated.
This deferred batching therefore interacts poorly with the pKVM pinning
scenario as we can find ourselves in a situation where the migration code
fails to migrate a folio due to the elevated refcount from the pending
mlock operation.
Hugh Dickins adds:-
!folio_test_lru() has never been a very reliable way to tell if an
lru_add_drain_all() is worth calling, to remove LRU cache references to
make the folio migratable: the LRU flag may be set even while the folio is
held with an extra reference in a per-CPU LRU cache.
5.18 commit 2fbb0c10d1e8 may have made it more unreliable. Then 6.11
commit 33dfe9204f29 ("mm/gup: clear the LRU flag of a page before adding
to LRU batch") tried to make it reliable, by moving LRU flag clearing; but
missed the mlock/munlock batches, so still unreliable as reported.
And it turns out to be difficult to extend 33dfe9204f29's LRU flag
clearing to the mlock/munlock batches: if they do benefit from batching,
mlock/munlock cannot be so effective when easily suppressed while !LRU.
Instead, switch to an expected ref_count check, which was more reliable
all along: some more false positives (unhelpful drains) than before, and
never a guarantee that the folio will prove migratable, but better.
Note on PG_private_2: ceph and nfs are still using the deprecated
PG_private_2 flag, with the aid of netfs and filemap support functions.
Although it is consistently matched by an increment of folio ref_count,
folio_expected_ref_count() intentionally does not recognize it, and ceph
folio migration currently depends on that for PG_private_2 folios to be
rejected. New references to the deprecated flag are discouraged, so do
not add it into the collect_longterm_unpinnable_folios() calculation: but
longterm pinning of transiently PG_private_2 ceph and nfs folios (an
uncommon case) may invoke a redundant lru_add_drain_all(). And this makes
easy the backport to earlier releases: up to and including 6.12, btrfs
also used PG_private_2, but without a ref_count increment.
Note for stable backports: requires 6.16 commit 86ebd50224c0 ("mm:
add folio_expected_ref_count() for reference count calculation").
Link: https://lkml.kernel.org/r/41395944-b0e3-c3ac-d648-8ddd70451d28@google.com
Link: https://lkml.kernel.org/r/bd1f314a-fca1-8f19-cac0-b936c9614557@google.com
Fixes: 9a4e9f3b2d73 ("mm: update get_user_pages_longterm to migrate pages allocated from CMA region")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Will Deacon <will@kernel.org>
Closes: https://lore.kernel.org/linux-mm/20250815101858.24352-1-will@kernel.org/
Acked-by: Kiryl Shutsemau <kas@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Keir Fraser <keirf@google.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Li Zhe <lizhe.67@bytedance.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shivank Garg <shivankg@amd.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Xu <weixugc@google.com>
Cc: yangge <yangge1116@126.com>
Cc: Yuanchu Xie <yuanchu@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 86ebd50224c0734d965843260d0dc057a9431c61 ]
Patch series " JFS: Implement migrate_folio for jfs_metapage_aops" v5.
This patchset addresses a warning that occurs during memory compaction due
to JFS's missing migrate_folio operation. The warning was introduced by
commit 7ee3647243e5 ("migrate: Remove call to ->writepage") which added
explicit warnings when filesystem don't implement migrate_folio.
The syzbot reported following [1]:
jfs_metapage_aops does not implement migrate_folio
WARNING: CPU: 1 PID: 5861 at mm/migrate.c:955 fallback_migrate_folio mm/migrate.c:953 [inline]
WARNING: CPU: 1 PID: 5861 at mm/migrate.c:955 move_to_new_folio+0x70e/0x840 mm/migrate.c:1007
Modules linked in:
CPU: 1 UID: 0 PID: 5861 Comm: syz-executor280 Not tainted 6.15.0-rc1-next-20250411-syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
RIP: 0010:fallback_migrate_folio mm/migrate.c:953 [inline]
RIP: 0010:move_to_new_folio+0x70e/0x840 mm/migrate.c:1007
To fix this issue, this series implement metapage_migrate_folio() for JFS
which handles both single and multiple metapages per page configurations.
While most filesystems leverage existing migration implementations like
filemap_migrate_folio(), buffer_migrate_folio_norefs() or
buffer_migrate_folio() (which internally used folio_expected_refs()),
JFS's metapage architecture requires special handling of its private data
during migration. To support this, this series introduce the
folio_expected_ref_count(), which calculates external references to a
folio from page/swap cache, private data, and page table mappings.
This standardized implementation replaces the previous ad-hoc
folio_expected_refs() function and enables JFS to accurately determine
whether a folio has unexpected references before attempting migration.
Implement folio_expected_ref_count() to calculate expected folio reference
counts from:
- Page/swap cache (1 per page)
- Private data (1)
- Page table mappings (1 per map)
While originally needed for page migration operations, this improved
implementation standardizes reference counting by consolidating all
refcount contributors into a single, reusable function that can benefit
any subsystem needing to detect unexpected references to folios.
The folio_expected_ref_count() returns the sum of these external
references without including any reference the caller itself might hold.
Callers comparing against the actual folio_ref_count() must account for
their own references separately.
Link: https://syzkaller.appspot.com/bug?extid=8bb6fd945af4e0ad9299 [1]
Link: https://lkml.kernel.org/r/20250430100150.279751-1-shivankg@amd.com
Link: https://lkml.kernel.org/r/20250430100150.279751-2-shivankg@amd.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Shivank Garg <shivankg@amd.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Co-developed-by: David Hildenbrand <david@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 98c6d259319e ("mm/gup: check ref_count instead of lru before migration")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8d79ed36bfc83d0583ab72216b7980340478cdfb upstream.
This reverts commit 0885ef470560: that was a fix to the reverted
33dfe9204f29b415bbc0abb1a50642d1ba94f5e9.
Link: https://lkml.kernel.org/r/aa0e9d67-fbcd-9d79-88a1-641dfbe1d9d1@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Keir Fraser <keirf@google.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Li Zhe <lizhe.67@bytedance.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shivank Garg <shivankg@amd.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Xu <weixugc@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: yangge <yangge1116@126.com>
Cc: Yuanchu Xie <yuanchu@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a03db236aebfaeadf79396dbd570896b870bda01 upstream.
In the current implementation of longterm pin_user_pages(), we invoke
collect_longterm_unpinnable_folios(). This function iterates through the
list to check whether each folio belongs to the "longterm_unpinnabled"
category. The folios in this list essentially correspond to a contiguous
region of userspace addresses, with each folio representing a physical
address in increments of PAGESIZE.
If this userspace address range is mapped with large folio, we can
optimize the performance of function collect_longterm_unpinnable_folios()
by reducing the using of READ_ONCE() invoked in
pofs_get_folio()->page_folio()->_compound_head().
Also, we can simplify the logic of collect_longterm_unpinnable_folios().
Instead of comparing with prev_folio after calling pofs_get_folio(), we
can check whether the next page is within the same folio.
The performance test results, based on v6.15, obtained through the
gup_test tool from the kernel source tree are as follows. We achieve an
improvement of over 66% for large folio with pagesize=2M. For small
folio, we have only observed a very slight degradation in performance.
Without this patch:
[root@localhost ~] ./gup_test -HL -m 8192 -n 512
TAP version 13
1..1
# PIN_LONGTERM_BENCHMARK: Time: get:14391 put:10858 us#
ok 1 ioctl status 0
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
[root@localhost ~]# ./gup_test -LT -m 8192 -n 512
TAP version 13
1..1
# PIN_LONGTERM_BENCHMARK: Time: get:130538 put:31676 us#
ok 1 ioctl status 0
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
With this patch:
[root@localhost ~] ./gup_test -HL -m 8192 -n 512
TAP version 13
1..1
# PIN_LONGTERM_BENCHMARK: Time: get:4867 put:10516 us#
ok 1 ioctl status 0
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
[root@localhost ~]# ./gup_test -LT -m 8192 -n 512
TAP version 13
1..1
# PIN_LONGTERM_BENCHMARK: Time: get:131798 put:31328 us#
ok 1 ioctl status 0
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
[lizhe.67@bytedance.com: whitespace fix, per David]
Link: https://lkml.kernel.org/r/20250606091917.91384-1-lizhe.67@bytedance.com
Link: https://lkml.kernel.org/r/20250606023742.58344-1-lizhe.67@bytedance.com
Signed-off-by: Li Zhe <lizhe.67@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6f110a5e4f9977c31ce76fefbfef6fd4eab6bfb7 ]
... and don't error out so hard on missing module descriptions.
Before commit 6c6c1fc09de3 ("modpost: require a MODULE_DESCRIPTION()")
we used to warn about missing module descriptions, but only when
building with extra warnigns (ie 'W=1').
After that commit the warning became an unconditional hard error.
And it turns out not all modules have been converted despite the claims
to the contrary. As reported by Damian Tometzki, the slub KUnit test
didn't have a module description, and apparently nobody ever really
noticed.
The reason nobody noticed seems to be that the slub KUnit tests get
disabled by SLUB_TINY, which also ends up disabling a lot of other code,
both in tests and in slub itself. And so anybody doing full build tests
didn't actually see this failre.
So let's disable SLUB_TINY for build-only tests, since it clearly ends
up limiting build coverage. Also turn the missing module descriptions
error back into a warning, but let's keep it around for non-'W=1'
builds.
Reported-by: Damian Tometzki <damian@riscv-rocks.de>
Link: https://lore.kernel.org/all/01070196099fd059-e8463438-7b1b-4ec8-816d-173874be9966-000000@eu-central-1.amazonses.com/
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Fixes: 6c6c1fc09de3 ("modpost: require a MODULE_DESCRIPTION()")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 21cc2b5c5062a256ae9064442d37ebbc23f5aef7 ]
When restoring a reservation for an anonymous page, we need to check to
freeing a surplus. However, __unmap_hugepage_range() causes data race
because it reads h->surplus_huge_pages without the protection of
hugetlb_lock.
And adjust_reservation is a boolean variable that indicates whether
reservations for anonymous pages in each folio should be restored.
Therefore, it should be initialized to false for each round of the loop.
However, this variable is not initialized to false except when defining
the current adjust_reservation variable.
This means that once adjust_reservation is set to true even once within
the loop, reservations for anonymous pages will be restored
unconditionally in all subsequent rounds, regardless of the folio's state.
To fix this, we need to add the missing hugetlb_lock, unlock the
page_table_lock earlier so that we don't lock the hugetlb_lock inside the
page_table_lock lock, and initialize adjust_reservation to false on each
round within the loop.
Link: https://lkml.kernel.org/r/20250823182115.1193563-1-aha310510@gmail.com
Fixes: df7a6d1f6405 ("mm/hugetlb: restore the reservation if needed")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Reported-by: syzbot+417aeb05fd190f3a6da9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=417aeb05fd190f3a6da9
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Page vs folio differences ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e6b543ca9806d7bced863f43020e016ee996c057 upstream.
When creating a new scheme of DAMON_RECLAIM, the calculation of
'min_age_region' uses 'aggr_interval' as the divisor, which may lead to
division-by-zero errors. Fix it by directly returning -EINVAL when such a
case occurs.
Link: https://lkml.kernel.org/r/20250827115858.1186261-3-yanquanmin1@huawei.com
Fixes: f5a79d7c0c87 ("mm/damon: introduce struct damos_access_pattern")
Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: ze zuo <zuoze1@huawei.com>
Cc: <stable@vger.kernel.org> [6.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3260a3f0828e06f5f13fac69fb1999a6d60d9cff upstream.
state_show() reads kdamond->damon_ctx without holding damon_sysfs_lock.
This allows a use-after-free race:
CPU 0 CPU 1
----- -----
state_show() damon_sysfs_turn_damon_on()
ctx = kdamond->damon_ctx; mutex_lock(&damon_sysfs_lock);
damon_destroy_ctx(kdamond->damon_ctx);
kdamond->damon_ctx = NULL;
mutex_unlock(&damon_sysfs_lock);
damon_is_running(ctx); /* ctx is freed */
mutex_lock(&ctx->kdamond_lock); /* UAF */
(The race can also occur with damon_sysfs_kdamonds_rm_dirs() and
damon_sysfs_kdamond_release(), which free or replace the context under
damon_sysfs_lock.)
Fix by taking damon_sysfs_lock before dereferencing the context, mirroring
the locking used in pid_show().
The bug has existed since state_show() first accessed kdamond->damon_ctx.
Link: https://lkml.kernel.org/r/20250905101046.2288-1-disclosure@aisle.com
Fixes: a61ea561c871 ("mm/damon/sysfs: link DAMON for virtual address spaces monitoring")
Signed-off-by: Stanislav Fort <disclosure@aisle.com>
Reported-by: Stanislav Fort <disclosure@aisle.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 711f19dfd783ffb37ca4324388b9c4cb87e71363 upstream.
Patch series "mm/damon: avoid divide-by-zero in DAMON module's parameters
application".
DAMON's RECLAIM and LRU_SORT modules perform no validation on
user-configured parameters during application, which may lead to
division-by-zero errors.
Avoid the divide-by-zero by adding validation checks when DAMON modules
attempt to apply the parameters.
This patch (of 2):
During the calculation of 'hot_thres' and 'cold_thres', either
'sample_interval' or 'aggr_interval' is used as the divisor, which may
lead to division-by-zero errors. Fix it by directly returning -EINVAL
when such a case occurs. Additionally, since 'aggr_interval' is already
required to be set no smaller than 'sample_interval' in damon_set_attrs(),
only the case where 'sample_interval' is zero needs to be checked.
Link: https://lkml.kernel.org/r/20250827115858.1186261-2-yanquanmin1@huawei.com
Fixes: 40e983cca927 ("mm/damon: introduce DAMON-based LRU-lists Sorting")
Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: ze zuo <zuoze1@huawei.com>
Cc: <stable@vger.kernel.org> [6.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ce652aac9c90a96c6536681d17518efb1f660fb8 upstream.
Kernel initializes the "jiffies" timer as 5 minutes below zero, as shown
in include/linux/jiffies.h
/*
* Have the 32 bit jiffies value wrap 5 minutes after boot
* so jiffies wrap bugs show up earlier.
*/
#define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ))
And jiffies comparison help functions cast unsigned value to signed to
cover wraparound
#define time_after_eq(a,b) \
(typecheck(unsigned long, a) && \
typecheck(unsigned long, b) && \
((long)((a) - (b)) >= 0))
When quota->charged_from is initialized to 0, time_after_eq() can
incorrectly return FALSE even after reset_interval has elapsed. This
occurs when (jiffies - reset_interval) produces a value with MSB=1, which
is interpreted as negative in signed arithmetic.
This issue primarily affects 32-bit systems because: On 64-bit systems:
MSB=1 values occur after ~292 million years from boot (assuming HZ=1000),
almost impossible.
On 32-bit systems: MSB=1 values occur during the first 5 minutes after
boot, and the second half of every jiffies wraparound cycle, starting from
day 25 (assuming HZ=1000)
When above unexpected FALSE return from time_after_eq() occurs, the
charging window will not reset. The user impact depends on esz value at
that time.
If esz is 0, scheme ignores configured quotas and runs without any limits.
If esz is not 0, scheme stops working once the quota is exhausted. It
remains until the charging window finally resets.
So, change quota->charged_from to jiffies at damos_adjust_quota() when it
is considered as the first charge window. By this change, we can avoid
unexpected FALSE return from time_after_eq()
Link: https://lkml.kernel.org/r/20250822025057.1740854-1-ekffu200098@gmail.com
Fixes: 2b8a248d5873 ("mm/damon/schemes: implement size quota for schemes application speed control") # 5.16
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3be306cccdccede13e3cefd0c14e430cc2b7c9c7 upstream.
Duplicate memory errors can be reported by multiple sources.
Passing an already poisoned page to action_result() causes issues:
* The amount of hardware corrupted memory is incorrectly updated.
* Per NUMA node MF stats are incorrectly updated.
* Redundant "already poisoned" messages are printed.
Avoid those issues by:
* Skipping hardware corrupted memory updates for already poisoned pages.
* Skipping per NUMA node MF stats updates for already poisoned pages.
* Dropping redundant "already poisoned" messages.
Make MF_MSG_ALREADY_POISONED consistent with other action_page_types and
make calls to action_result() consistent for already poisoned normal pages
and huge pages.
Link: https://lkml.kernel.org/r/aLCiHMy12Ck3ouwC@hpe.com
Fixes: b8b9488d50b7 ("mm/memory-failure: improve memory failure action_result messages")
Signed-off-by: Kyle Meyer <kyle.meyer@hpe.com>
Reviewed-by: Jiaqi Yan <jiaqiyan@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jane Chu <jane.chu@oracle.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d613f53c83ec47089c4e25859d5e8e0359f6f8da upstream.
When I did memory failure tests, below panic occurs:
page dumped because: VM_BUG_ON_PAGE(PagePoisoned(page))
kernel BUG at include/linux/page-flags.h:616!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 3 PID: 720 Comm: bash Not tainted 6.10.0-rc1-00195-g148743902568 #40
RIP: 0010:unpoison_memory+0x2f3/0x590
RSP: 0018:ffffa57fc8787d60 EFLAGS: 00000246
RAX: 0000000000000037 RBX: 0000000000000009 RCX: ffff9be25fcdc9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff9be25fcdc9c0
RBP: 0000000000300000 R08: ffffffffb4956f88 R09: 0000000000009ffb
R10: 0000000000000284 R11: ffffffffb4926fa0 R12: ffffe6b00c000000
R13: ffff9bdb453dfd00 R14: 0000000000000000 R15: fffffffffffffffe
FS: 00007f08f04e4740(0000) GS:ffff9be25fcc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000564787a30410 CR3: 000000010d4e2000 CR4: 00000000000006f0
Call Trace:
<TASK>
unpoison_memory+0x2f3/0x590
simple_attr_write_xsigned.constprop.0.isra.0+0xb3/0x110
debugfs_attr_write+0x42/0x60
full_proxy_write+0x5b/0x80
vfs_write+0xd5/0x540
ksys_write+0x64/0xe0
do_syscall_64+0xb9/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f08f0314887
RSP: 002b:00007ffece710078 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007f08f0314887
RDX: 0000000000000009 RSI: 0000564787a30410 RDI: 0000000000000001
RBP: 0000564787a30410 R08: 000000000000fefe R09: 000000007fffffff
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000009
R13: 00007f08f041b780 R14: 00007f08f0417600 R15: 00007f08f0416a00
</TASK>
Modules linked in: hwpoison_inject
---[ end trace 0000000000000000 ]---
RIP: 0010:unpoison_memory+0x2f3/0x590
RSP: 0018:ffffa57fc8787d60 EFLAGS: 00000246
RAX: 0000000000000037 RBX: 0000000000000009 RCX: ffff9be25fcdc9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff9be25fcdc9c0
RBP: 0000000000300000 R08: ffffffffb4956f88 R09: 0000000000009ffb
R10: 0000000000000284 R11: ffffffffb4926fa0 R12: ffffe6b00c000000
R13: ffff9bdb453dfd00 R14: 0000000000000000 R15: fffffffffffffffe
FS: 00007f08f04e4740(0000) GS:ffff9be25fcc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000564787a30410 CR3: 000000010d4e2000 CR4: 00000000000006f0
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x31c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception ]---
The root cause is that unpoison_memory() tries to check the PG_HWPoison
flags of an uninitialized page. So VM_BUG_ON_PAGE(PagePoisoned(page)) is
triggered. This can be reproduced by below steps:
1.Offline memory block:
echo offline > /sys/devices/system/memory/memory12/state
2.Get offlined memory pfn:
page-types -b n -rlN
3.Write pfn to unpoison-pfn
echo <pfn> > /sys/kernel/debug/hwpoison/unpoison-pfn
This scenario can be identified by pfn_to_online_page() returning NULL.
And ZONE_DEVICE pages are never expected, so we can simply fail if
pfn_to_online_page() == NULL to fix the bug.
Link: https://lkml.kernel.org/r/20250828024618.1744895-1-linmiaohe@huawei.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 394bfac1c7f7b701c2c93834c5761b9c9ceeebcf upstream.
Commit 8ee53820edfd ("thp: mmu_notifier_test_young") introduced
mmu_notifier_test_young(), but we are passing the wrong address.
In xxx_scan_pmd(), the actual iteration address is "_address" not
"address". We seem to misuse the variable on the very beginning.
Change it to the right one.
[akpm@linux-foundation.org fix whitespace, per everyone]
Link: https://lkml.kernel.org/r/20250822063318.11644-1-richard.weiyang@gmail.com
Fixes: 8ee53820edfd ("thp: mmu_notifier_test_young")
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f2d2f9598ebb0158a3fe17cda0106d7752e654a2 upstream.
Introduce and use {pgd,p4d}_populate_kernel() in core MM code when
populating PGD and P4D entries for the kernel address space. These
helpers ensure proper synchronization of page tables when updating the
kernel portion of top-level page tables.
Until now, the kernel has relied on each architecture to handle
synchronization of top-level page tables in an ad-hoc manner. For
example, see commit 9b861528a801 ("x86-64, mem: Update all PGDs for direct
mapping and vmemmap mapping changes").
However, this approach has proven fragile for following reasons:
1) It is easy to forget to perform the necessary page table
synchronization when introducing new changes.
For instance, commit 4917f55b4ef9 ("mm/sparse-vmemmap: improve memory
savings for compound devmaps") overlooked the need to synchronize
page tables for the vmemmap area.
2) It is also easy to overlook that the vmemmap and direct mapping areas
must not be accessed before explicit page table synchronization.
For example, commit 8d400913c231 ("x86/vmemmap: handle unpopulated
sub-pmd ranges")) caused crashes by accessing the vmemmap area
before calling sync_global_pgds().
To address this, as suggested by Dave Hansen, introduce _kernel() variants
of the page table population helpers, which invoke architecture-specific
hooks to properly synchronize page tables. These are introduced in a new
header file, include/linux/pgalloc.h, so they can be called from common
code.
They reuse existing infrastructure for vmalloc and ioremap.
Synchronization requirements are determined by ARCH_PAGE_TABLE_SYNC_MASK,
and the actual synchronization is performed by
arch_sync_kernel_mappings().
This change currently targets only x86_64, so only PGD and P4D level
helpers are introduced. Currently, these helpers are no-ops since no
architecture sets PGTBL_{PGD,P4D}_MODIFIED in ARCH_PAGE_TABLE_SYNC_MASK.
In theory, PUD and PMD level helpers can be added later if needed by other
architectures. For now, 32-bit architectures (x86-32 and arm) only handle
PGTBL_PMD_MODIFIED, so p*d_populate_kernel() will never affect them unless
we introduce a PMD level helper.
[harry.yoo@oracle.com: fix KASAN build error due to p*d_populate_kernel()]
Link: https://lkml.kernel.org/r/20250822020727.202749-1-harry.yoo@oracle.com
Link: https://lkml.kernel.org/r/20250818020206.4517-3-harry.yoo@oracle.com
Fixes: 8d400913c231 ("x86/vmemmap: handle unpopulated sub-pmd ranges")
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kiryl Shutsemau <kas@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: bibo mao <maobibo@loongson.cn>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Christoph Lameter (Ampere) <cl@gentwo.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Huth <thuth@redhat.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Adjust context ]
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7a19afee6fb39df63ddea7ce78976d8c521178c6 upstream.
Similar to commit 09c6304e38e4 ("kasan: test: fix compatibility with
FORTIFY_SOURCE") the kernel is panicing in kasan_string().
This is due to the `src` and `ptr` not being hidden from the optimizer
which would disable the runtime fortify string checker.
Call trace:
__fortify_panic+0x10/0x20 (P)
kasan_strings+0x980/0x9b0
kunit_try_run_case+0x68/0x190
kunit_generic_run_threadfn_adapter+0x34/0x68
kthread+0x1c4/0x228
ret_from_fork+0x10/0x20
Code: d503233f a9bf7bfd 910003fd 9424b243 (d4210000)
---[ end trace 0000000000000000 ]---
note: kunit_try_catch[128] exited with irqs disabled
note: kunit_try_catch[128] exited with preempt_count 1
# kasan_strings: try faulted: last
** replaying previous printk message **
# kasan_strings: try faulted: last line seen mm/kasan/kasan_test_c.c:1600
# kasan_strings: internal error occurred preventing test case from running: -4
Link: https://lkml.kernel.org/r/20250801120236.2962642-1-yeoreum.yun@arm.com
Fixes: 73228c7ecc5e ("KASAN: port KASAN Tests to KUnit")
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c3576889d87b603cb66b417e08844a53c1077a37 ]
For !CONFIG_SPARSEMEM_VMEMMAP, memmap page accounting is currently done
upfront in sparse_buffer_init(). However, sparse_buffer_alloc() may
return NULL in failure scenario.
Also, memmap pages may be allocated either from the memblock allocator
during early boot or from the buddy allocator. When removed via
arch_remove_memory(), accounting of memmap pages must reflect the original
allocation source.
To ensure correctness:
* Account memmap pages after successful allocation in sparse_init_nid()
and section_activate().
* Account memmap pages in section_deactivate() based on allocation
source.
Link: https://lkml.kernel.org/r/20250807183545.1424509-1-sumanthk@linux.ibm.com
Fixes: 15995a352474 ("mm: report per-page metadata information")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Similar to commit 09c6304e38e4 ("kasan: test: fix compatibility with
FORTIFY_SOURCE") the kernel is panicing in kasan_string().
This is due to the `src` and `ptr` not being hidden from the optimizer
which would disable the runtime fortify string checker.
Call trace:
__fortify_panic+0x10/0x20 (P)
kasan_strings+0x980/0x9b0
kunit_try_run_case+0x68/0x190
kunit_generic_run_threadfn_adapter+0x34/0x68
kthread+0x1c4/0x228
ret_from_fork+0x10/0x20
Code: d503233f a9bf7bfd 910003fd 9424b243 (d4210000)
---[ end trace 0000000000000000 ]---
note: kunit_try_catch[128] exited with irqs disabled
note: kunit_try_catch[128] exited with preempt_count 1
# kasan_strings: try faulted: last
** replaying previous printk message **
# kasan_strings: try faulted: last line seen mm/kasan/kasan_test_c.c:1600
# kasan_strings: internal error occurred preventing test case from running: -4
Link: https://lkml.kernel.org/r/20250801120236.2962642-1-yeoreum.yun@arm.com
Fixes: 73228c7ecc5e ("KASAN: port KASAN Tests to KUnit")
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org>
[ One less test in older trees ]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b4efccec8d06ceb10a7d34d7b1c449c569d53770 ]
object_err() reports details of an object for further debugging, such as
the freelist pointer, redzone, etc. However, if the pointer is invalid,
attempting to access object metadata can lead to a crash since it does
not point to a valid object.
One known path to the crash is when alloc_consistency_checks()
determines the pointer to the allocated object is invalid because of a
freelist corruption, and calls object_err() to report it. The debug code
should report and handle the corruption gracefully and not crash in the
process.
In case the pointer is NULL or check_valid_pointer() returns false for
the pointer, only print the pointer value and skip accessing metadata.
Fixes: 81819f0fc828 ("SLUB core")
Cc: <stable@vger.kernel.org>
Signed-off-by: Li Qiong <liqiong@nfschina.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4b183dd9359d5772446cb634b12a383bed98c4fc ]
slab_err() has variadic printf arguments but instead of passing them to
slab_bug() it does vsnprintf() to a buffer and passes %s, buf.
To allow passing them directly, turn slab_bug() to __slab_bug() with a
va_list parameter, and slab_bug() a wrapper with fmt, ... parameters.
Then slab_err() can call __slab_bug() without the intermediate buffer.
Also constify fmt everywhere, which also simplifies object_err()'s
call to slab_bug().
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Stable-dep-of: b4efccec8d06 ("mm/slub: avoid accessing metadata when pointer is invalid in object_err()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3f6f32b14ab35452d2ed52f7821cf2829923c98d ]
If a slab object is corrupted or an error occurs in its internal
validation, continuing after restoration may cause other side effects.
At this point, it is difficult to debug because the problem occurred in
the past. It is useful to use WARN() to catch errors at the point of
issue because WARN() could trigger panic for system debugging when
panic_on_warn is enabled. WARN() is added where to detect the error on
slab_err and object_err.
It makes sense to only do the WARN() after printing the logs. slab_err
is splited to __slab_err that calls the WARN() and it is called after
printing logs.
Signed-off-by: Hyesoo Yu <hyesoo.yu@samsung.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Stable-dep-of: b4efccec8d06 ("mm/slub: avoid accessing metadata when pointer is invalid in object_err()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ed5ec2e952595a469eae1f6dce040737359b6da2 ]
Previously, the restore occurred after printing the object in slub.
After commit 47d911b02cbe ("slab: make check_object() more consistent"),
the bytes are printed after the restore. This information about the bytes
before the restore is highly valuable for debugging purpose.
For instance, in a event of cache issue, it displays byte patterns
by breaking them down into 64-bytes units. Without this information,
we can only speculate on how it was broken. Hence the corrupted regions
should be printed prior to the restoration process. However if an object
breaks in multiple places, the same log may be output multiple times.
Therefore the slub log is reported only once to prevent redundant printing,
by sending a parameter indicating whether an error has occurred previously.
Signed-off-by: Hyesoo Yu <hyesoo.yu@samsung.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Stable-dep-of: b4efccec8d06 ("mm/slub: avoid accessing metadata when pointer is invalid in object_err()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 850470a8413a8a78e772c4f6bd9fe81ec6bd5b0f upstream.
set_track_prepare() can incur lock recursion.
The issue is that it is called from hrtimer_start_range_ns
holding the per_cpu(hrtimer_bases)[n].lock, but when enabled
CONFIG_DEBUG_OBJECTS_TIMERS, may wake up kswapd in set_track_prepare,
and try to hold the per_cpu(hrtimer_bases)[n].lock.
Avoid deadlock caused by implicitly waking up kswapd by passing in
allocation flags, which do not contain __GFP_KSWAPD_RECLAIM in the
debug_objects_fill_pool() case. Inside stack depot they are processed by
gfp_nested_mask().
Since ___slab_alloc() has preemption disabled, we mask out
__GFP_DIRECT_RECLAIM from the flags there.
The oops looks something like:
BUG: spinlock recursion on CPU#3, swapper/3/0
lock: 0xffffff8a4bf29c80, .magic: dead4ead, .owner: swapper/3/0, .owner_cpu: 3
Hardware name: Qualcomm Technologies, Inc. Popsicle based on SM8850 (DT)
Call trace:
spin_bug+0x0
_raw_spin_lock_irqsave+0x80
hrtimer_try_to_cancel+0x94
task_contending+0x10c
enqueue_dl_entity+0x2a4
dl_server_start+0x74
enqueue_task_fair+0x568
enqueue_task+0xac
do_activate_task+0x14c
ttwu_do_activate+0xcc
try_to_wake_up+0x6c8
default_wake_function+0x20
autoremove_wake_function+0x1c
__wake_up+0xac
wakeup_kswapd+0x19c
wake_all_kswapds+0x78
__alloc_pages_slowpath+0x1ac
__alloc_pages_noprof+0x298
stack_depot_save_flags+0x6b0
stack_depot_save+0x14
set_track_prepare+0x5c
___slab_alloc+0xccc
__kmalloc_cache_noprof+0x470
__set_page_owner+0x2bc
post_alloc_hook[jt]+0x1b8
prep_new_page+0x28
get_page_from_freelist+0x1edc
__alloc_pages_noprof+0x13c
alloc_slab_page+0x244
allocate_slab+0x7c
___slab_alloc+0x8e8
kmem_cache_alloc_noprof+0x450
debug_objects_fill_pool+0x22c
debug_object_activate+0x40
enqueue_hrtimer[jt]+0xdc
hrtimer_start_range_ns+0x5f8
...
Signed-off-by: yangshiguang <yangshiguang@xiaomi.com>
Fixes: 5cf909c553e9 ("mm/slub: use stackdepot to save stack trace in objects")
Cc: stable@vger.kernel.org
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c873ccbb2f8db46ad9b4a989ea924b6d8f19abf1 upstream.
There are some AA deadlock issues in kmemleak, similar to the situation
reported by Breno [1]. The deadlock path is as follows:
mem_pool_alloc()
-> raw_spin_lock_irqsave(&kmemleak_lock, flags);
-> pr_warn()
-> netconsole subsystem
-> netpoll
-> __alloc_skb
-> __create_object
-> raw_spin_lock_irqsave(&kmemleak_lock, flags);
To solve this problem, switch to printk_safe mode before printing warning
message, this will redirect all printk()-s to a special per-CPU buffer,
which will be flushed later from a safe context (irq work), and this
deadlock problem can be avoided. The proper API to use should be
printk_deferred_enter()/printk_deferred_exit() [2]. Another way is to
place the warn print after kmemleak is released.
Link: https://lkml.kernel.org/r/20250822073541.1886469-1-gubowen5@huawei.com
Link: https://lore.kernel.org/all/20250731-kmemleak_lock-v1-1-728fd470198f@debian.org/#t [1]
Link: https://lore.kernel.org/all/5ca375cd-4a20-4807-b897-68b289626550@redhat.com/ [2]
Signed-off-by: Gu Bowen <gubowen5@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Lu Jialin <lujialin4@huawei.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9614d8bee66387501f48718fa306e17f2aa3f2f3 upstream.
With CONFIG_HIGHPTE on 32-bit ARM, move_pages_pte() maps PTE pages using
kmap_local_page(), which requires unmapping in Last-In-First-Out order.
The current code maps dst_pte first, then src_pte, but unmaps them in the
same order (dst_pte, src_pte), violating the LIFO requirement. This
causes the warning in kunmap_local_indexed():
WARNING: CPU: 0 PID: 604 at mm/highmem.c:622 kunmap_local_indexed+0x178/0x17c
addr \!= __fix_to_virt(FIX_KMAP_BEGIN + idx)
Fix this by reversing the unmap order to respect LIFO ordering.
This issue follows the same pattern as similar fixes:
- commit eca6828403b8 ("crypto: skcipher - fix mismatch between mapping and unmapping order")
- commit 8cf57c6df818 ("nilfs2: eliminate staggered calls to kunmap in nilfs_rename")
Both of which addressed the same fundamental requirement that kmap_local
operations must follow LIFO ordering.
Link: https://lkml.kernel.org/r/20250731144431.773923-1-sashal@kernel.org
Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2e6053fea379806269c4f7f5e36b523c9c0fb35c upstream.
When memory_failure() is called for a already hwpoisoned pfn,
kill_accessing_process() will be called to kill current task. However, if
the vma of the accessing vaddr is VM_PFNMAP, walk_page_range() will skip
the vma in walk_page_test() and return 0.
Before commit aaf99ac2ceb7 ("mm/hwpoison: do not send SIGBUS to processes
with recovered clean pages"), kill_accessing_process() will return EFAULT.
For x86, the current task will be killed in kill_me_maybe().
However, after this commit, kill_accessing_process() simplies return 0,
that means UCE is handled properly, but it doesn't actually. In such
case, the user task will trigger UCE infinitely.
To fix it, add .test_walk callback for hwpoison_walk_ops to scan all vmas.
Link: https://lkml.kernel.org/r/20250815073209.1984582-1-tujinjiang@huawei.com
Fixes: aaf99ac2ceb7 ("mm/hwpoison: do not send SIGBUS to processes with recovered clean pages")
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Jane Chu <jane.chu@oracle.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dde30854bddfb5d69f30022b53c5955a41088b33 upstream.
The mm/debug_vm_pagetable test allocates manually page table entries for
the tests it runs, using also its manually allocated mm_struct. That in
itself is ok, but when it exits, at destroy_args() it fails to clear those
entries with the *_clear functions.
The problem is that leaves stale entries. If another process allocates an
mm_struct with a pgd at the same address, it may end up running into the
stale entry. This is happening in practice on a debug kernel with
CONFIG_DEBUG_VM_PGTABLE=y, for example this is the output with some extra
debugging I added (it prints a warning trace if pgtables_bytes goes
negative, in addition to the warning at check_mm() function):
[ 2.539353] debug_vm_pgtable: [get_random_vaddr ]: random_vaddr is 0x7ea247140000
[ 2.539366] kmem_cache info
[ 2.539374] kmem_cachep 0x000000002ce82385 - freelist 0x0000000000000000 - offset 0x508
[ 2.539447] debug_vm_pgtable: [init_args ]: args->mm is 0x000000002267cc9e
(...)
[ 2.552800] WARNING: CPU: 5 PID: 116 at include/linux/mm.h:2841 free_pud_range+0x8bc/0x8d0
[ 2.552816] Modules linked in:
[ 2.552843] CPU: 5 UID: 0 PID: 116 Comm: modprobe Not tainted 6.12.0-105.debug_vm2.el10.ppc64le+debug #1 VOLUNTARY
[ 2.552859] Hardware name: IBM,9009-41A POWER9 (architected) 0x4e0202 0xf000005 of:IBM,FW910.00 (VL910_062) hv:phyp pSeries
[ 2.552872] NIP: c0000000007eef3c LR: c0000000007eef30 CTR: c0000000003d8c90
[ 2.552885] REGS: c0000000622e73b0 TRAP: 0700 Not tainted (6.12.0-105.debug_vm2.el10.ppc64le+debug)
[ 2.552899] MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002822 XER: 0000000a
[ 2.552954] CFAR: c0000000008f03f0 IRQMASK: 0
[ 2.552954] GPR00: c0000000007eef30 c0000000622e7650 c000000002b1ac00 0000000000000001
[ 2.552954] GPR04: 0000000000000008 0000000000000000 c0000000007eef30 ffffffffffffffff
[ 2.552954] GPR08: 00000000ffff00f5 0000000000000001 0000000000000048 0000000000004000
[ 2.552954] GPR12: 00000003fa440000 c000000017ffa300 c0000000051d9f80 ffffffffffffffdb
[ 2.552954] GPR16: 0000000000000000 0000000000000008 000000000000000a 60000000000000e0
[ 2.552954] GPR20: 4080000000000000 c0000000113af038 00007fffcf130000 0000700000000000
[ 2.552954] GPR24: c000000062a6a000 0000000000000001 8000000062a68000 0000000000000001
[ 2.552954] GPR28: 000000000000000a c000000062ebc600 0000000000002000 c000000062ebc760
[ 2.553170] NIP [c0000000007eef3c] free_pud_range+0x8bc/0x8d0
[ 2.553185] LR [c0000000007eef30] free_pud_range+0x8b0/0x8d0
[ 2.553199] Call Trace:
[ 2.553207] [c0000000622e7650] [c0000000007eef30] free_pud_range+0x8b0/0x8d0 (unreliable)
[ 2.553229] [c0000000622e7750] [c0000000007f40b4] free_pgd_range+0x284/0x3b0
[ 2.553248] [c0000000622e7800] [c0000000007f4630] free_pgtables+0x450/0x570
[ 2.553274] [c0000000622e78e0] [c0000000008161c0] exit_mmap+0x250/0x650
[ 2.553292] [c0000000622e7a30] [c0000000001b95b8] __mmput+0x98/0x290
[ 2.558344] [c0000000622e7a80] [c0000000001d1018] exit_mm+0x118/0x1b0
[ 2.558361] [c0000000622e7ac0] [c0000000001d141c] do_exit+0x2ec/0x870
[ 2.558376] [c0000000622e7b60] [c0000000001d1ca8] do_group_exit+0x88/0x150
[ 2.558391] [c0000000622e7bb0] [c0000000001d1db8] sys_exit_group+0x48/0x50
[ 2.558407] [c0000000622e7be0] [c00000000003d810] system_call_exception+0x1e0/0x4c0
[ 2.558423] [c0000000622e7e50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec
(...)
[ 2.558892] ---[ end trace 0000000000000000 ]---
[ 2.559022] BUG: Bad rss-counter state mm:000000002267cc9e type:MM_ANONPAGES val:1
[ 2.559037] BUG: non-zero pgtables_bytes on freeing mm: -6144
Here the modprobe process ended up with an allocated mm_struct from the
mm_struct slab that was used before by the debug_vm_pgtable test. That is
not a problem, since the mm_struct is initialized again etc., however, if
it ends up using the same pgd table, it bumps into the old stale entry
when clearing/freeing the page table entries, so it tries to free an entry
already gone (that one which was allocated by the debug_vm_pgtable test),
which also explains the negative pgtables_bytes since it's accounting for
not allocated entries in the current process.
As far as I looked pgd_{alloc,free} etc. does not clear entries, and
clearing of the entries is explicitly done in the free_pgtables->
free_pgd_range->free_p4d_range->free_pud_range->free_pmd_range->
free_pte_range path. However, the debug_vm_pgtable test does not call
free_pgtables, since it allocates mm_struct and entries manually for its
test and eg. not goes through page faults. So it also should clear
manually the entries before exit at destroy_args().
This problem was noticed on a reboot X number of times test being done on
a powerpc host, with a debug kernel with CONFIG_DEBUG_VM_PGTABLE enabled.
Depends on the system, but on a 100 times reboot loop the problem could
manifest once or twice, if a process ends up getting the right mm->pgd
entry with the stale entries used by mm/debug_vm_pagetable. After using
this patch, I couldn't reproduce/experience the problems anymore. I was
able to reproduce the problem as well on latest upstream kernel (6.16).
I also modified destroy_args() to use mmput() instead of mmdrop(), there
is no reason to hold mm_users reference and not release the mm_struct
entirely, and in the output above with my debugging prints I already had
patched it to use mmput, it did not fix the problem, but helped in the
debugging as well.
Link: https://lkml.kernel.org/r/20250731214051.4115182-1-herton@redhat.com
Fixes: 3c9b84f044a9 ("mm/debug_vm_pgtable: introduce struct pgtable_debug_args")
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7e6c3130690a01076efdf45aa02ba5d5c16849a0 upstream.
damon_migrate_pages() tries migration even if the target node is invalid.
If users mistakenly make such invalid requests via
DAMOS_MIGRATE_{HOT,COLD} action, the below kernel BUG can happen.
[ 7831.883495] BUG: unable to handle page fault for address: 0000000000001f48
[ 7831.884160] #PF: supervisor read access in kernel mode
[ 7831.884681] #PF: error_code(0x0000) - not-present page
[ 7831.885203] PGD 0 P4D 0
[ 7831.885468] Oops: Oops: 0000 [#1] SMP PTI
[ 7831.885852] CPU: 31 UID: 0 PID: 94202 Comm: kdamond.0 Not tainted 6.16.0-rc5-mm-new-damon+ #93 PREEMPT(voluntary)
[ 7831.886913] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.el9 04/01/2014
[ 7831.887777] RIP: 0010:__alloc_frozen_pages_noprof (include/linux/mmzone.h:1724 include/linux/mmzone.h:1750 mm/page_alloc.c:4936 mm/page_alloc.c:5137)
[...]
[ 7831.895953] Call Trace:
[ 7831.896195] <TASK>
[ 7831.896397] __folio_alloc_noprof (mm/page_alloc.c:5183 mm/page_alloc.c:5192)
[ 7831.896787] migrate_pages_batch (mm/migrate.c:1189 mm/migrate.c:1851)
[ 7831.897228] ? __pfx_alloc_migration_target (mm/migrate.c:2137)
[ 7831.897735] migrate_pages (mm/migrate.c:2078)
[ 7831.898141] ? __pfx_alloc_migration_target (mm/migrate.c:2137)
[ 7831.898664] damon_migrate_folio_list (mm/damon/ops-common.c:321 mm/damon/ops-common.c:354)
[ 7831.899140] damon_migrate_pages (mm/damon/ops-common.c:405)
[...]
Add a target node validity check in damon_migrate_pages(). The validity
check is stolen from that of do_pages_move(), which is being used for the
move_pages() system call.
Link: https://lkml.kernel.org/r/20250720185822.1451-1-sj@kernel.org
Fixes: b51820ebea65 ("mm/damon/paddr: introduce DAMOS_MIGRATE_COLD action for demotion") [6.11.x]
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Honggyu Kim <honggyu.kim@sk.com>
Cc: Hyeongtak Ji <hyeongtak.ji@sk.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bbcaee20e03ecaeeecba32a703816a0d4502b6c4 upstream.
max_scan in page_cache_next_miss always decreases to zero when no hole is
found, causing the return value to be index + 0.
Fix this by preserving the max_scan value throughout the loop.
Jan said "From what I know and have seen in the past, wrong responses
from page_cache_next_miss() can lead to readahead window reduction and
thus reduced read speeds."
Link: https://lkml.kernel.org/r/20250605054935.2323451-1-chizhiling@163.com
Fixes: 901a269ff3d5 ("filemap: fix page_cache_next_miss() when no hole found")
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 47b0f6d8f0d2be4d311a49e13d2fd5f152f492b2 upstream.
When netpoll is enabled, calling pr_warn_once() while holding
kmemleak_lock in mem_pool_alloc() can cause a deadlock due to lock
inversion with the netconsole subsystem. This occurs because
pr_warn_once() may trigger netpoll, which eventually leads to
__alloc_skb() and back into kmemleak code, attempting to reacquire
kmemleak_lock.
This is the path for the deadlock.
mem_pool_alloc()
-> raw_spin_lock_irqsave(&kmemleak_lock, flags);
-> pr_warn_once()
-> netconsole subsystem
-> netpoll
-> __alloc_skb
-> __create_object
-> raw_spin_lock_irqsave(&kmemleak_lock, flags);
Fix this by setting a flag and issuing the pr_warn_once() after
kmemleak_lock is released.
Link: https://lkml.kernel.org/r/20250731-kmemleak_lock-v1-1-728fd470198f@debian.org
Fixes: c5665868183f ("mm: kmemleak: use the memory pool for early allocations")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d1534ae23c2b6be350c8ab060803fbf6e9682adc upstream.
A soft lockup warning was observed on a relative small system x86-64
system with 16 GB of memory when running a debug kernel with kmemleak
enabled.
watchdog: BUG: soft lockup - CPU#8 stuck for 33s! [kworker/8:1:134]
The test system was running a workload with hot unplug happening in
parallel. Then kemleak decided to disable itself due to its inability to
allocate more kmemleak objects. The debug kernel has its
CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE set to 40,000.
The soft lockup happened in kmemleak_do_cleanup() when the existing
kmemleak objects were being removed and deleted one-by-one in a loop via a
workqueue. In this particular case, there are at least 40,000 objects
that need to be processed and given the slowness of a debug kernel and the
fact that a raw_spinlock has to be acquired and released in
__delete_object(), it could take a while to properly handle all these
objects.
As kmemleak has been disabled in this case, the object removal and
deletion process can be further optimized as locking isn't really needed.
However, it is probably not worth the effort to optimize for such an edge
case that should rarely happen. So the simple solution is to call
cond_resched() at periodic interval in the iteration loop to avoid soft
lockup.
Link: https://lkml.kernel.org/r/20250728190248.605750-1-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 59305202c67fea50378dcad0cc199dbc13a0e99a upstream.
Memory hot remove unmaps and tears down various kernel page table regions
as required. The ptdump code can race with concurrent modifications of
the kernel page tables. When leaf entries are modified concurrently, the
dump code may log stale or inconsistent information for a VA range, but
this is otherwise not harmful.
But when intermediate levels of kernel page table are freed, the dump code
will continue to use memory that has been freed and potentially
reallocated for another purpose. In such cases, the ptdump code may
dereference bogus addresses, leading to a number of potential problems.
To avoid the above mentioned race condition, platforms such as arm64,
riscv and s390 take memory hotplug lock, while dumping kernel page table
via the sysfs interface /sys/kernel/debug/kernel_page_tables.
Similar race condition exists while checking for pages that might have
been marked W+X via /sys/kernel/debug/kernel_page_tables/check_wx_pages
which in turn calls ptdump_check_wx(). Instead of solving this race
condition again, let's just move the memory hotplug lock inside generic
ptdump_check_wx() which will benefit both the scenarios.
Drop get_online_mems() and put_online_mems() combination from all existing
platform ptdump code paths.
Link: https://lkml.kernel.org/r/20250620052427.2092093-1-anshuman.khandual@arm.com
Fixes: bbd6ec605c0f ("arm64/mm: Enable memory hot remove")
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e2d18cbf178775ad377ad88ee55e6e183c38d262 upstream.
The slab allocator observes the task's NUMA policy in various places
such as allocating slab pages. Large kmalloc() allocations used to do
that too, until an unintended change by c4cab557521a ("mm/slab_common:
cleanup kmalloc_large()") resulted in ignoring mempolicy and just
preferring the local node. Restore the NUMA policy support.
Fixes: c4cab557521a ("mm/slab_common: cleanup kmalloc_large()")
Cc: <stable@vger.kernel.org>
Acked-by: Christoph Lameter (Ampere) <cl@gentwo.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aba6faec0103ed8f169be8dce2ead41fcb689446 upstream.
When UFFDIO_MOVE encounters a migration PMD entry, it proceeds with
obtaining a folio and accessing it even though the entry is swp_entry_t.
Add the missing check and let split_huge_pmd() handle migration entries.
While at it also remove unnecessary folio check.
[surenb@google.com: remove extra folio check, per David]
Link: https://lkml.kernel.org/r/20250807200418.1963585-1-surenb@google.com
Link: https://lkml.kernel.org/r/20250806220022.926763-1-surenb@google.com
Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: syzbot+b446dbe27035ef6bd6c2@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68794b5c.a70a0220.693ce.0050.GAE@google.com/
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 579bd5006fe7f4a7abb32da0160d376476cab67d upstream.
When committing new scheme parameters from the sysfs, the target_nid field
of the damos struct would not be copied. This would result in the
target_nid field to retain its original value, despite being updated in
the sysfs interface.
This patch fixes this issue by copying target_nid in damos_commit().
Link: https://lkml.kernel.org/r/20250709004729.17252-1-bijan311@gmail.com
Fixes: 83dc7bbaecae ("mm/damon/sysfs: use damon_commit_ctx()")
Signed-off-by: Bijan Tabatabai <bijantabatab@micron.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 152c1339dc13ad46f1b136e8693de15980750835 upstream.
In setup_swap_map(), we only ensure badpages are in range (0, last_page].
As maxpages might be < last_page, setup_clusters() will encounter a buffer
overflow when a badpage is >= maxpages.
Only call inc_cluster_info_page() for badpage which is < maxpages to fix
the issue.
Link: https://lkml.kernel.org/r/20250522122554.12209-4-shikemeng@huaweicloud.com
Fixes: b843786b0bd0 ("mm: swapfile: fix SSD detection with swapfile on btrfs")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 255116c5b0fa2145ede28c2f7b248df5e73834d1 upstream.
We use maxpages from read_swap_header() to initialize swap_info_struct,
however the maxpages might be reduced in setup_swap_extents() and the
si->max is assigned with the reduced maxpages from the
setup_swap_extents().
Obviously, this could lead to memory waste as we allocated memory based on
larger maxpages, besides, this could lead to a potential deadloop as
following:
1) When calling setup_clusters() with larger maxpages, unavailable
pages within range [si->max, larger maxpages) are not accounted with
inc_cluster_info_page(). As a result, these pages are assumed
available but can not be allocated. The cluster contains these pages
can be moved to frag_clusters list after it's all available pages were
allocated.
2) When the cluster mentioned in 1) is the only cluster in
frag_clusters list, cluster_alloc_swap_entry() assume order 0
allocation will never failed and will enter a deadloop by keep trying
to allocate page from the only cluster in frag_clusters which contains
no actually available page.
Call setup_swap_extents() to get the final maxpages before
swap_info_struct initialization to fix the issue.
After this change, span will include badblocks and will become large
value which I think is correct value:
In summary, there are two kinds of swapfile_activate operations.
1. Filesystem style: Treat all blocks logical continuity and find
usable physical extents in logical range. In this way, si->pages will
be actual usable physical blocks and span will be "1 + highest_block -
lowest_block".
2. Block device style: Treat all blocks physically continue and only
one single extent is added. In this way, si->pages will be si->max and
span will be "si->pages - 1". Actually, si->pages and si->max is only
used in block device style and span value is set with si->pages. As a
result, span value in block device style will become a larger value as
you mentioned.
I think larger value is correct based on:
1. Span value in filesystem style is "1 + highest_block -
lowest_block" which is the range cover all possible phisical blocks
including the badblocks.
2. For block device style, si->pages is the actual usable block number
and is already in pr_info. The original span value before this patch
is also refer to usable block number which is redundant in pr_info.
[shikemeng@huaweicloud.com: ensure si->pages == si->max - 1 after setup_swap_extents()]
Link: https://lkml.kernel.org/r/20250522122554.12209-3-shikemeng@huaweicloud.com
Link: https://lkml.kernel.org/r/20250718065139.61989-1-shikemeng@huaweicloud.com
Link: https://lkml.kernel.org/r/20250522122554.12209-3-shikemeng@huaweicloud.com
Fixes: 661383c6111a ("mm: swap: relaim the cached parts that got scanned")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 188cb385bbf04d486df3e52f28c47b3961f5f0c0 upstream.
When pmd_to_hmm_pfn_flags() is unused, it prevents kernel builds with
clang, `make W=1` and CONFIG_TRANSPARENT_HUGEPAGE=n:
mm/hmm.c:186:29: warning: unused function 'pmd_to_hmm_pfn_flags' [-Wunused-function]
Fix this by moving the function to the respective existing ifdeffery
for its the only user.
See also:
6863f5643dd7 ("kbuild: allow Clang to find unused static inline functions for W=1 build")
Link: https://lkml.kernel.org/r/20250710082403.664093-1-andriy.shevchenko@linux.intel.com
Fixes: 992de9a8b751 ("mm/hmm: allow to mirror vma of a file on a DAX backed filesystem")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f1897f2f08b28ae59476d8b73374b08f856973af upstream.
syzkaller reported such a BUG_ON():
------------[ cut here ]------------
kernel BUG at mm/khugepaged.c:1835!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
...
CPU: 6 UID: 0 PID: 8009 Comm: syz.15.106 Kdump: loaded Tainted: G W 6.13.0-rc6 #22
Tainted: [W]=WARN
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : collapse_file+0xa44/0x1400
lr : collapse_file+0x88/0x1400
sp : ffff80008afe3a60
...
Call trace:
collapse_file+0xa44/0x1400 (P)
hpage_collapse_scan_file+0x278/0x400
madvise_collapse+0x1bc/0x678
madvise_vma_behavior+0x32c/0x448
madvise_walk_vmas.constprop.0+0xbc/0x140
do_madvise.part.0+0xdc/0x2c8
__arm64_sys_madvise+0x68/0x88
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x34/0x128
el0t_64_sync_handler+0xc8/0xd0
el0t_64_sync+0x190/0x198
This indicates that the pgoff is unaligned. After analysis, I confirm the
vma is mapped to /dev/zero. Such a vma certainly has vm_file, but it is
set to anonymous by mmap_zero(). So even if it's mmapped by 2m-unaligned,
it can pass the check in thp_vma_allowable_order() as it is an
anonymous-mmap, but then be collapsed as a file-mmap.
It seems the problem has existed for a long time, but actually, since we
have khugepaged_max_ptes_none check before, we will skip collapse it as it
is /dev/zero and so has no present page. But commit d8ea7cc8547c limit
the check for only khugepaged, so the BUG_ON() can be triggered by
madvise_collapse().
Add vma_is_anonymous() check to make such vma be processed by
hpage_collapse_scan_pmd().
Link: https://lkml.kernel.org/r/20250111034511.2223353-1-liushixin2@huawei.com
Fixes: d8ea7cc8547c ("mm/khugepaged: add flag to predicate khugepaged-only behavior")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Yang Shi <yang@os.amperecomputing.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mattew Wilcox <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[acsjakub: backport, clean apply]
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 694d6b99923eb05a8fd188be44e26077d19f0e21 upstream.
Commit 48b4800a1c6a ("zsmalloc: page migration support") added support for
migrating zsmalloc pages using the movable_operations migration framework.
However, the commit did not take into account that zsmalloc supports
migration only when CONFIG_COMPACTION is enabled. Tracing shows that
zsmalloc was still passing the __GFP_MOVABLE flag even when compaction is
not supported.
This can result in unmovable pages being allocated from movable page
blocks (even without stealing page blocks), ZONE_MOVABLE and CMA area.
Possible user visible effects:
- Some ZONE_MOVABLE memory can be not actually movable
- CMA allocation can fail because of this
- Increased memory fragmentation due to ignoring the page mobility
grouping feature
I'm not really sure who uses kernels without compaction support, though :(
To fix this, clear the __GFP_MOVABLE flag when
!IS_ENABLED(CONFIG_COMPACTION).
Link: https://lkml.kernel.org/r/20250704103053.6913-1-harry.yoo@oracle.com
Fixes: 48b4800a1c6a ("zsmalloc: page migration support")
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9f1e8cd0b7c4c944e9921b52a6661b5eda2705ab upstream.
In shrink_folio_list(), the hwpoisoned folio may be large folio, which
can't be handled by unmap_poisoned_folio(). For THP, try_to_unmap_one()
must be passed with TTU_SPLIT_HUGE_PMD to split huge PMD first and then
retry. Without TTU_SPLIT_HUGE_PMD, we will trigger null-ptr deref of
pvmw.pte. Even we passed TTU_SPLIT_HUGE_PMD, we will trigger a
WARN_ON_ONCE due to the page isn't in swapcache.
Since UCE is rare in real world, and race with reclaimation is more rare,
just skipping the hwpoisoned large folio is enough. memory_failure() will
handle it if the UCE is triggered again.
This happens when memory reclaim for large folio races with
memory_failure(), and will lead to kernel panic. The race is as
follows:
cpu0 cpu1
shrink_folio_list memory_failure
TestSetPageHWPoison
unmap_poisoned_folio
--> trigger BUG_ON due to
unmap_poisoned_folio couldn't
handle large folio
[tujinjiang@huawei.com: add comment to unmap_poisoned_folio()]
Link: https://lkml.kernel.org/r/69fd4e00-1b13-d5f7-1c82-705c7d977ea4@huawei.com
Link: https://lkml.kernel.org/r/20250627125747.3094074-2-tujinjiang@huawei.com
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Fixes: 1b0449544c64 ("mm/vmscan: don't try to reclaim hwpoison folio")
Reported-by: syzbot+3b220254df55d8ca8a61@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68412d57.050a0220.2461cf.000e.GAE@google.com/
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6ade153349c6bb990d170cecc3e8bdd8628119ab upstream.
Since 6ee9b3d84775 ("kasan: remove kasan_find_vm_area() to prevent
possible deadlock"), more detailed info about the vmalloc mapping and the
origin was dropped due to potential deadlocks.
While fixing the deadlock is necessary, that patch was too quick in
killing an otherwise useful feature, and did no due-diligence in
understanding if an alternative option is available.
Restore printing more helpful vmalloc allocation info in KASAN reports
with the help of vmalloc_dump_obj(). Example report:
| BUG: KASAN: vmalloc-out-of-bounds in vmalloc_oob+0x4c9/0x610
| Read of size 1 at addr ffffc900002fd7f3 by task kunit_try_catch/493
|
| CPU: [...]
| Call Trace:
| <TASK>
| dump_stack_lvl+0xa8/0xf0
| print_report+0x17e/0x810
| kasan_report+0x155/0x190
| vmalloc_oob+0x4c9/0x610
| [...]
|
| The buggy address belongs to a 1-page vmalloc region starting at 0xffffc900002fd000 allocated at vmalloc_oob+0x36/0x610
| The buggy address belongs to the physical page:
| page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x126364
| flags: 0x200000000000000(node=0|zone=2)
| raw: 0200000000000000 0000000000000000 dead000000000122 0000000000000000
| raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
| page dumped because: kasan: bad access detected
|
| [..]
Link: https://lkml.kernel.org/r/20250716152448.3877201-1-elver@google.com
Fixes: 6ee9b3d84775 ("kasan: remove kasan_find_vm_area() to prevent possible deadlock")
Signed-off-by: Marco Elver <elver@google.com>
Suggested-by: Uladzislau Rezki <urezki@gmail.com>
Acked-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: Yunseong Kim <ysk@kzalloc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 153ad566724fe6f57b14f66e9726d295d22e576d upstream.
After a recent change in clang to expose uninitialized warnings from const
variables [1], there is a false positive warning from the if statement in
advisor_mode_show().
mm/ksm.c:3687:11: error: variable 'output' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
3687 | else if (ksm_advisor == KSM_ADVISOR_SCAN_TIME)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
mm/ksm.c:3690:33: note: uninitialized use occurs here
3690 | return sysfs_emit(buf, "%s\n", output);
| ^~~~~~
Rewrite the if statement to implicitly make KSM_ADVISOR_NONE the else
branch so that it is obvious to the compiler that ksm_advisor can only be
KSM_ADVISOR_NONE or KSM_ADVISOR_SCAN_TIME due to the assignments in
advisor_mode_store().
Link: https://lkml.kernel.org/r/20250715-ksm-fix-clang-21-uninit-warning-v1-1-f443feb4bfc4@kernel.org
Fixes: 66790e9a735b ("mm/ksm: add sysfs knobs for advisor")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://github.com/ClangBuiltLinux/linux/issues/2100
Link: https://github.com/llvm/llvm-project/commit/2464313eef01c5b1edf0eccf57a32cdee01472c7 [1]
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6ee9b3d84775944fb8c8a447961cd01274ac671c upstream.
find_vm_area() couldn't be called in atomic_context. If find_vm_area() is
called to reports vm area information, kasan can trigger deadlock like:
CPU0 CPU1
vmalloc();
alloc_vmap_area();
spin_lock(&vn->busy.lock)
spin_lock_bh(&some_lock);
<interrupt occurs>
<in softirq>
spin_lock(&some_lock);
<access invalid address>
kasan_report();
print_report();
print_address_description();
kasan_find_vm_area();
find_vm_area();
spin_lock(&vn->busy.lock) // deadlock!
To prevent possible deadlock while kasan reports, remove kasan_find_vm_area().
Link: https://lkml.kernel.org/r/20250703181018.580833-1-yeoreum.yun@arm.com
Fixes: c056a364e954 ("kasan: print virtual mapping info in reports")
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reported-by: Yunseong Kim <ysk@kzalloc.com>
Reviewed-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fea18c686320a53fce7ad62a87a3e1d10ad02f31 upstream.
vmap_pages_pte_range() enters the lazy MMU mode, but fails to leave it in
case an error is encountered.
Link: https://lkml.kernel.org/r/20250623075721.2817094-1-agordeev@linux.ibm.com
Fixes: 2ba3e6947aed ("mm/vmalloc: track which page-table levels were modified")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202506132017.T1l1l6ME-lkp@intel.com/
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0ea148a799198518d8ebab63ddd0bb6114a103bc upstream.
This commit fixes two kinds of races, they may have different results:
Barry reported a BUG_ON in commit c50f8e6053b0, we may see the same
BUG_ON if the filemap lookup returned NULL and folio is added to swap
cache after that.
If another kind of race is triggered (folio changed after lookup) we
may see RSS counter is corrupted:
[ 406.893936] BUG: Bad rss-counter state mm:ffff0000c5a9ddc0
type:MM_ANONPAGES val:-1
[ 406.894071] BUG: Bad rss-counter state mm:ffff0000c5a9ddc0
type:MM_SHMEMPAGES val:1
Because the folio is being accounted to the wrong VMA.
I'm not sure if there will be any data corruption though, seems no.
The issues above are critical already.
On seeing a swap entry PTE, userfaultfd_move does a lockless swap cache
lookup, and tries to move the found folio to the faulting vma. Currently,
it relies on checking the PTE value to ensure that the moved folio still
belongs to the src swap entry and that no new folio has been added to the
swap cache, which turns out to be unreliable.
While working and reviewing the swap table series with Barry, following
existing races are observed and reproduced [1]:
In the example below, move_pages_pte is moving src_pte to dst_pte, where
src_pte is a swap entry PTE holding swap entry S1, and S1 is not in the
swap cache:
CPU1 CPU2
userfaultfd_move
move_pages_pte()
entry = pte_to_swp_entry(orig_src_pte);
// Here it got entry = S1
... < interrupted> ...
<swapin src_pte, alloc and use folio A>
// folio A is a new allocated folio
// and get installed into src_pte
<frees swap entry S1>
// src_pte now points to folio A, S1
// has swap count == 0, it can be freed
// by folio_swap_swap or swap
// allocator's reclaim.
<try to swap out another folio B>
// folio B is a folio in another VMA.
<put folio B to swap cache using S1 >
// S1 is freed, folio B can use it
// for swap out with no problem.
...
folio = filemap_get_folio(S1)
// Got folio B here !!!
... < interrupted again> ...
<swapin folio B and free S1>
// Now S1 is free to be used again.
<swapout src_pte & folio A using S1>
// Now src_pte is a swap entry PTE
// holding S1 again.
folio_trylock(folio)
move_swap_pte
double_pt_lock
is_pte_pages_stable
// Check passed because src_pte == S1
folio_move_anon_rmap(...)
// Moved invalid folio B here !!!
The race window is very short and requires multiple collisions of multiple
rare events, so it's very unlikely to happen, but with a deliberately
constructed reproducer and increased time window, it can be reproduced
easily.
This can be fixed by checking if the folio returned by filemap is the
valid swap cache folio after acquiring the folio lock.
Another similar race is possible: filemap_get_folio may return NULL, but
folio (A) could be swapped in and then swapped out again using the same
swap entry after the lookup. In such a case, folio (A) may remain in the
swap cache, so it must be moved too:
CPU1 CPU2
userfaultfd_move
move_pages_pte()
entry = pte_to_swp_entry(orig_src_pte);
// Here it got entry = S1, and S1 is not in swap cache
folio = filemap_get_folio(S1)
// Got NULL
... < interrupted again> ...
<swapin folio A and free S1>
<swapout folio A re-using S1>
move_swap_pte
double_pt_lock
is_pte_pages_stable
// Check passed because src_pte == S1
folio_move_anon_rmap(...)
// folio A is ignored !!!
Fix this by checking the swap cache again after acquiring the src_pte
lock. And to avoid the filemap overhead, we check swap_map directly [2].
The SWP_SYNCHRONOUS_IO path does make the problem more complex, but so far
we don't need to worry about that, since folios can only be exposed to the
swap cache in the swap out path, and this is covered in this patch by
checking the swap cache again after acquiring the src_pte lock.
Testing with a simple C program that allocates and moves several GB of
memory did not show any observable performance change.
Link: https://lkml.kernel.org/r/20250604151038.21968-1-ryncsn@gmail.com
Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI")
Signed-off-by: Kairui Song <kasong@tencent.com>
Closes: https://lore.kernel.org/linux-mm/CAMgjq7B1K=6OOrK2OUZ0-tqCzi+EJt+2_K97TPGoSt=9+JwP7Q@mail.gmail.com/ [1]
Link: https://lore.kernel.org/all/CAGsJ_4yJhJBo16XhiC-nUzSheyX-V3-nFE+tAi=8Y560K8eT=A@mail.gmail.com/ [2]
Reviewed-by: Lokesh Gidra <lokeshgidra@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Chris Li <chrisl@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
(cherry picked from commit 0ea148a799198518d8ebab63ddd0bb6114a103bc)
[ lokeshgidra: resolved merged conflict caused by the difference in
move_swap_pte() arguments ]
Signed-off-by: Lokesh Gidra <lokeshgidra@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5c5f0468d172ddec2e333d738d2a1f85402cf0bc upstream.
The following data-race was found in show_numa_info():
==================================================================
BUG: KCSAN: data-race in vmalloc_info_show / vmalloc_info_show
read to 0xffff88800971fe30 of 4 bytes by task 8289 on cpu 0:
show_numa_info mm/vmalloc.c:4936 [inline]
vmalloc_info_show+0x5a8/0x7e0 mm/vmalloc.c:5016
seq_read_iter+0x373/0xb40 fs/seq_file.c:230
proc_reg_read_iter+0x11e/0x170 fs/proc/inode.c:299
....
write to 0xffff88800971fe30 of 4 bytes by task 8287 on cpu 1:
show_numa_info mm/vmalloc.c:4934 [inline]
vmalloc_info_show+0x38f/0x7e0 mm/vmalloc.c:5016
seq_read_iter+0x373/0xb40 fs/seq_file.c:230
proc_reg_read_iter+0x11e/0x170 fs/proc/inode.c:299
....
value changed: 0x0000008f -> 0x00000000
==================================================================
According to this report,there is a read/write data-race because
m->private is accessible to multiple CPUs. To fix this, instead of
allocating the heap in proc_vmalloc_init() and passing the heap address to
m->private, vmalloc_info_show() should allocate the heap.
Link: https://lkml.kernel.org/r/20250508165620.15321-1-aha310510@gmail.com
Fixes: 8e1d743f2c26 ("mm: vmalloc: support multiple nodes in vmallocinfo")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cbe4134ea4bc493239786220bd69cb8a13493190 ]
Export anon_inode_make_secure_inode() to allow KVM guest_memfd to create
anonymous inodes with proper security context. This replaces the current
pattern of calling alloc_anon_inode() followed by
inode_init_security_anon() for creating security context manually.
This change also fixes a security regression in secretmem where the
S_PRIVATE flag was not cleared after alloc_anon_inode(), causing
LSM/SELinux checks to be bypassed for secretmem file descriptors.
As guest_memfd currently resides in the KVM module, we need to export this
symbol for use outside the core kernel. In the future, guest_memfd might be
moved to core-mm, at which point the symbols no longer would have to be
exported. When/if that happens is still unclear.
Fixes: 2bfe15c52612 ("mm: create security context for memfd_secret inodes")
Suggested-by: David Hildenbrand <david@redhat.com>
Suggested-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Shivank Garg <shivankg@amd.com>
Link: https://lore.kernel.org/20250620070328.803704-3-shivankg@amd.com
Acked-by: "Mike Rapoport (Microsoft)" <rppt@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c1feab95e0b2e9fce7e4f4b2739baf40d84543af ]
Quite a few places want to build a struct qstr by given string;
it would be convenient to have a primitive doing that, rather
than open-coding it via QSTR_INIT().
The closest approximation was in bcachefs, but that expands to
initializer list - {.len = strlen(string), .name = string}.
It would be more useful to have it as compound literal -
(struct qstr){.len = strlen(string), .name = string}.
Unlike initializer list it's a valid expression. What's more,
it's a valid lvalue - it's an equivalent of anonymous local
variable with such initializer, so the things like
path->dentry = d_alloc_pseudo(mnt->mnt_sb, &QSTR(name));
are valid. It can also be used as initializer, with identical
effect -
struct qstr x = (struct qstr){.name = s, .len = strlen(s)};
is equivalent to
struct qstr anon_variable = {.name = s, .len = strlen(s)};
struct qstr x = anon_variable;
// anon_variable is never used after that point
and any even remotely sane compiler will manage to collapse that
into
struct qstr x = {.name = s, .len = strlen(s)};
What compound literals can't be used for is initialization of
global variables, but those are covered by QSTR_INIT().
This commit lifts definition(s) of QSTR() into linux/dcache.h,
converts it to compound literal (all bcachefs users are fine
with that) and converts assorted open-coded instances to using
that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Stable-dep-of: cbe4134ea4bc ("fs: export anon_inode_make_secure_inode() and fix secretmem LSM bypass")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 0cf4b1687a187ba9247c71721d8b064634eda1f7 upstream.
While an OOM failure in commit_merge() isn't really feasible due to the
allocation which might fail (a maple tree pre-allocation) being 'too small
to fail', we do need to handle this case correctly regardless.
In vma_merge_existing_range(), we can theoretically encounter failures
which result in an OOM error in two ways - firstly dup_anon_vma() might
fail with an OOM error, and secondly commit_merge() failing, ultimately,
to pre-allocate a maple tree node.
The abort logic for dup_anon_vma() resets the VMA iterator to the initial
range, ensuring that any logic looping on this iterator will correctly
proceed to the next VMA.
However the commit_merge() abort logic does not do the same thing. This
resulted in a syzbot report occurring because mlockall() iterates through
VMAs, is tolerant of errors, but ended up with an incorrect previous VMA
being specified due to incorrect iterator state.
While making this change, it became apparent we are duplicating logic -
the logic introduced in commit 41e6ddcaa0f1 ("mm/vma: add give_up_on_oom
option on modify/merge, use in uffd release") duplicates the
vmg->give_up_on_oom check in both abort branches.
Additionally, we observe that we can perform the anon_dup check safely on
dup_anon_vma() failure, as this will not be modified should this call
fail.
Finally, we need to reset the iterator in both cases, so now we can simply
use the exact same code to abort for both.
We remove the VM_WARN_ON(err != -ENOMEM) as it would be silly for this to
be otherwise and it allows us to implement the abort check more neatly.
Link: https://lkml.kernel.org/r/20250606125032.164249-1-lorenzo.stoakes@oracle.com
Fixes: 47b16d0462a4 ("mm: abort vma_modify() on merge out of memory failure")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: syzbot+d16409ea9ecc16ed261a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/6842cc67.a00a0220.29ac89.003b.GAE@google.com/
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 517f496e1e61bd169d585dab4dd77e7147506322 upstream.
After commit 1aaf8c122918 ("mm: gup: fix infinite loop within
__get_longterm_locked") we are able to longterm pin folios that are not
supposed to get longterm pinned, simply because they temporarily have the
LRU flag cleared (esp. temporarily isolated).
For example, two __get_longterm_locked() callers can race, or
__get_longterm_locked() can race with anything else that temporarily
isolates folios.
The introducing commit mentions the use case of a driver that uses
vm_ops->fault to insert pages allocated through cma_alloc() into the page
tables, assuming they can later get longterm pinned. These pages/ folios
would never have the LRU flag set and consequently cannot get isolated.
There is no known in-tree user making use of that so far, fortunately.
To handle that in the future -- and avoid retrying forever to
isolate/migrate them -- we will need a different mechanism for the CMA
area *owner* to indicate that it actually already allocated the page and
is fine with longterm pinning it. The LRU flag is not suitable for that.
Probably we can lookup the relevant CMA area and query the bitmap; we only
have have to care about some races, probably. If already allocated, we
could just allow longterm pinning)
Anyhow, let's fix the "must not be longterm pinned" problem first by
reverting the original commit.
Link: https://lkml.kernel.org/r/20250611131314.594529-1-david@redhat.com
Fixes: 1aaf8c122918 ("mm: gup: fix infinite loop within __get_longterm_locked")
Signed-off-by: David Hildenbrand <david@redhat.com>
Closes: https://lore.kernel.org/all/20250522092755.GA3277597@tiffany/
Reported-by: Hyesoo Yu <hyesoo.yu@samsung.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Peter Xu <peterx@redhat.com>
Cc: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Cc: Aijun Sun <aijun.sun@unisoc.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
