| Age | Commit message (Collapse) | Author |
|---|
|
Add some additional tests in lib/tests/test_bits.c to cover the
expected results of the fixed type BIT_U*() macros.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
Add some additional tests in lib/tests/test_bits.c to cover the
expected/non-expected values of the fixed-type GENMASK_U*() macros.
Also check that the result value matches the expected type. Since
those are known at build time, use static_assert() instead of normal
kunit tests.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct kunit_suite **" but the returned type will
be "struct kunit_suite * const *". Since it isn't generally possible
to remove the const qualifier, adjust the allocation type to match
the assignment.
Link: https://lore.kernel.org/r/20250426062433.work.124-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The generic FourCC format always prints the data using the big endian
order. It is generic because it allows to read the data using a custom
ordering.
The current code uses "n" for reading data in the reverse host ordering.
It makes the 4 variants [hnbl] consistent with the generic printing
of IPv4 addresses.
Unfortunately, it creates confusion on big endian systems. For example,
it shows the data &(u32)0x67503030 as
%p4cn 00Pg (0x30305067)
But people expect that the ordering stays the same. The network ordering
is a big-endian ordering.
The problem is that the semantic is not the same. The modifiers affect
the output ordering of IPv4 addresses while they affect the reading order
in case of FourCC code.
Avoid the confusion by replacing the "n" modifier with "hR", aka
reverse host ordering. It is inspired by the existing %p[mM]R printf
format.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/r/CAMuHMdV9tX=TG7E_CrSF=2PY206tXf+_yYRuacG48EWEtJLo-Q@mail.gmail.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Link: https://lore.kernel.org/r/20250428123132.578771-1-pmladek@suse.com
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
|
|
usercopy of 64 bit values does not work on 32-bit SPARC:
# usercopy_test_valid: EXPECTATION FAILED at lib/tests/usercopy_kunit.c:209
Expected val_u64 == 0x5a5b5c5d6a6b6c6d, but
val_u64 == 1515936861 (0x5a5b5c5d)
0x5a5b5c5d6a6b6c6d == 6510899242581322861 (0x5a5b5c5d6a6b6c6d)
Disable the test.
Fixes: 4c5d7bc63775 ("usercopy: Add tests for all get_user() sizes")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250416-kunit-sparc-usercopy-v1-1-a772054db3af@linutronix.de
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Now that the architecture-optimized Poly1305 kconfig symbols are defined
regardless of CRYPTO, there is no need for CRYPTO_LIB_POLY1305 to select
CRYPTO. So, remove that. This makes the indirection through the
CRYPTO_LIB_POLY1305_INTERNAL symbol unnecessary, so get rid of that and
just use CRYPTO_LIB_POLY1305 directly. Finally, make the fallback to
the generic implementation use a default value instead of a select; this
makes it consistent with how the arch-optimized code gets enabled and
also with how CRYPTO_LIB_BLAKE2S_GENERIC gets enabled.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that the architecture-optimized ChaCha kconfig symbols are defined
regardless of CRYPTO, there is no need for CRYPTO_LIB_CHACHA to select
CRYPTO. So, remove that. This makes the indirection through the
CRYPTO_LIB_CHACHA_INTERNAL symbol unnecessary, so get rid of that and
just use CRYPTO_LIB_CHACHA directly. Finally, make the fallback to the
generic implementation use a default value instead of a select; this
makes it consistent with how the arch-optimized code gets enabled and
also with how CRYPTO_LIB_BLAKE2S_GENERIC gets enabled.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Continue disentangling the crypto library functions from the generic
crypto infrastructure by moving the x86 BLAKE2s, ChaCha, and Poly1305
library functions into a new directory arch/x86/lib/crypto/ that does
not depend on CRYPTO. This mirrors the distinction between crypto/ and
lib/crypto/.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Continue disentangling the crypto library functions from the generic
crypto infrastructure by moving the s390 ChaCha library functions into a
new directory arch/s390/lib/crypto/ that does not depend on CRYPTO.
This mirrors the distinction between crypto/ and lib/crypto/.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Continue disentangling the crypto library functions from the generic
crypto infrastructure by moving the riscv ChaCha library functions into
a new directory arch/riscv/lib/crypto/ that does not depend on CRYPTO.
This mirrors the distinction between crypto/ and lib/crypto/.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Continue disentangling the crypto library functions from the generic
crypto infrastructure by moving the powerpc ChaCha and Poly1305 library
functions into a new directory arch/powerpc/lib/crypto/ that does not
depend on CRYPTO. This mirrors the distinction between crypto/ and
lib/crypto/.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Continue disentangling the crypto library functions from the generic
crypto infrastructure by moving the mips ChaCha and Poly1305 library
functions into a new directory arch/mips/lib/crypto/ that does not
depend on CRYPTO. This mirrors the distinction between crypto/ and
lib/crypto/.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Continue disentangling the crypto library functions from the generic
crypto infrastructure by moving the arm64 ChaCha and Poly1305 library
functions into a new directory arch/arm64/lib/crypto/ that does not
depend on CRYPTO. This mirrors the distinction between crypto/ and
lib/crypto/.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Continue disentangling the crypto library functions from the generic
crypto infrastructure by moving the arm BLAKE2s, ChaCha, and Poly1305
library functions into a new directory arch/arm/lib/crypto/ that does
not depend on CRYPTO. This mirrors the distinction between crypto/ and
lib/crypto/.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that all sm3_base users have been converted to use the API
partial block handling, remove the partial block helpers as well
as the lib/crypto functions.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that all sha256_base users have been converted to use the API
partial block handling, remove the partial block helpers.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the Crypto API partial block handling.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds support for kunit tests of generic 32-bit FourCCs added to
vsprintf.
Acked-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/PN3PR01MB95973AF4F6262B2D1996FB25B8B52@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
|
|
%p4cc is designed for DRM/V4L2 FourCCs with their specific quirks, but
it's useful to be able to print generic 4-character codes formatted as
an integer. Extend it to add format specifiers for printing generic
32-bit FourCCs with various endian semantics:
%p4ch Host byte order
%p4cn Network byte order
%p4cl Little-endian
%p4cb Big-endian
The endianness determines how bytes are interpreted as a u32, and the
FourCC is then always printed MSByte-first (this is the opposite of
V4L/DRM FourCCs). This covers most practical cases, e.g. %p4cn would
allow printing LSByte-first FourCCs stored in host endian order
(other than the hex form being in character order, not the integer
value).
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/PN3PR01MB9597B01823415CB7FCD3BC27B8B52@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- lib/prime_numbers: KUnit test should not select PRIME_NUMBERS (Geert
Uytterhoeven)
- ubsan: Fix panic from test_ubsan_out_of_bounds (Mostafa Saleh)
- ubsan: Remove 'default UBSAN' from UBSAN_INTEGER_WRAP (Nathan
Chancellor)
- string: Add load_unaligned_zeropad() code path to sized_strscpy()
(Peter Collingbourne)
- kasan: Add strscpy() test to trigger tag fault on arm64 (Vincenzo
Frascino)
- Disable GCC randstruct for COMPILE_TEST
* tag 'hardening-v6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib/prime_numbers: KUnit test should not select PRIME_NUMBERS
ubsan: Fix panic from test_ubsan_out_of_bounds
lib/Kconfig.ubsan: Remove 'default UBSAN' from UBSAN_INTEGER_WRAP
hardening: Disable GCC randstruct for COMPILE_TEST
kasan: Add strscpy() test to trigger tag fault on arm64
string: Add load_unaligned_zeropad() code path to sized_strscpy()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"31 hotfixes.
9 are cc:stable and the remainder address post-6.15 issues or aren't
considered necessary for -stable kernels.
22 patches are for MM, 9 are otherwise"
* tag 'mm-hotfixes-stable-2025-04-16-19-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
MAINTAINERS: update HUGETLB reviewers
mm: fix apply_to_existing_page_range()
selftests/mm: fix compiler -Wmaybe-uninitialized warning
alloc_tag: handle incomplete bulk allocations in vm_module_tags_populate
mailmap: add entry for Jean-Michel Hautbois
mm: (un)track_pfn_copy() fix + doc improvements
mm: fix filemap_get_folios_contig returning batches of identical folios
mm/hugetlb: add a line break at the end of the format string
selftests: mincore: fix tmpfs mincore test failure
mm/hugetlb: fix set_max_huge_pages() when there are surplus pages
mm/cma: report base address of single range correctly
mm: page_alloc: speed up fallbacks in rmqueue_bulk()
kunit: slub: add module description
mm/kasan: add module decription
ucs2_string: add module description
zlib: add module description
fpga: tests: add module descriptions
samples/livepatch: add module descriptions
ASN.1: add module description
mm/vma: add give_up_on_oom option on modify/merge, use in uffd release
...
|
|
These fields are no longer needed, so remove them.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Export the generic block function so that it can be used by the
Crypto API.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move the sm3 library code into lib/crypto.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Enabling a (modular) test should not silently enable additional kernel
functionality, as that may increase the attack vector of a product.
Fix this by making PRIME_NUMBERS_KUNIT_TEST depend on PRIME_NUMBERS
instead of selecting it.
After this, one can safely enable CONFIG_KUNIT_ALL_TESTS=m to build
modules for all appropriate tests for ones system, without pulling in
extra unwanted functionality, while still allowing a tester to manually
enable PRIME_NUMBERS and this test suite on a system where PRIME_NUMBERS
is not enabled by default. Resurrect CONFIG_PRIME_NUMBERS=m in
tools/testing/selftests/lib/config for the latter use case.
Fixes: 313b38a6ecb46db4 ("lib/prime_numbers: convert self-test to KUnit")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/40f8a40eef4930d3ac9febd205bc171eb04e171c.1744641237.git.geert@linux-m68k.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Running lib_ubsan.ko on arm64 (without CONFIG_UBSAN_TRAP) panics the
kernel:
[ 31.616546] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: test_ubsan_out_of_bounds+0x158/0x158 [test_ubsan]
[ 31.646817] CPU: 3 UID: 0 PID: 179 Comm: insmod Not tainted 6.15.0-rc2 #1 PREEMPT
[ 31.648153] Hardware name: linux,dummy-virt (DT)
[ 31.648970] Call trace:
[ 31.649345] show_stack+0x18/0x24 (C)
[ 31.650960] dump_stack_lvl+0x40/0x84
[ 31.651559] dump_stack+0x18/0x24
[ 31.652264] panic+0x138/0x3b4
[ 31.652812] __ktime_get_real_seconds+0x0/0x10
[ 31.653540] test_ubsan_load_invalid_value+0x0/0xa8 [test_ubsan]
[ 31.654388] init_module+0x24/0xff4 [test_ubsan]
[ 31.655077] do_one_initcall+0xd4/0x280
[ 31.655680] do_init_module+0x58/0x2b4
That happens because the test corrupts other data in the stack:
400: d5384108 mrs x8, sp_el0
404: f9426d08 ldr x8, [x8, #1240]
408: f85f83a9 ldur x9, [x29, #-8]
40c: eb09011f cmp x8, x9
410: 54000301 b.ne 470 <test_ubsan_out_of_bounds+0x154> // b.any
As there is no guarantee the compiler will order the local variables
as declared in the module:
volatile char above[4] = { }; /* Protect surrounding memory. */
volatile int arr[4];
volatile char below[4] = { }; /* Protect surrounding memory. */
There is another problem where the out-of-bound index is 5 which is larger
than the extra surrounding memory for protection.
So, use a struct to enforce the ordering, and fix the index to be 4.
Also, remove some of the volatiles and rely on OPTIMIZER_HIDE_VAR()
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20250415203354.4109415-1-smostafa@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
CONFIG_UBSAN_INTEGER_WRAP is 'default UBSAN', which is problematic for a
couple of reasons.
The first is that this sanitizer is under active development on the
compiler side to come up with a solution that is maintainable on the
compiler side and usable on the kernel side. As a result of this, there
are many warnings when the sanitizer is enabled that have no clear path
to resolution yet but users may see them and report them in the meantime.
The second is that this option was renamed from
CONFIG_UBSAN_SIGNED_WRAP, meaning that if a configuration has
CONFIG_UBSAN=y but CONFIG_UBSAN_SIGNED_WRAP=n and it is upgraded via
olddefconfig (common in non-interactive scenarios such as CI),
CONFIG_UBSAN_INTEGER_WRAP will be silently enabled again.
Remove 'default UBSAN' from CONFIG_UBSAN_INTEGER_WRAP until it is ready
for regular usage and testing from a broader community than the folks
actively working on the feature.
Cc: stable@vger.kernel.org
Fixes: 557f8c582a9b ("ubsan: Reintroduce signed overflow sanitizer")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250414-drop-default-ubsan-integer-wrap-v1-1-392522551d6b@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The call to read_word_at_a_time() in sized_strscpy() is problematic
with MTE because it may trigger a tag check fault when reading
across a tag granule (16 bytes) boundary. To make this code
MTE compatible, let's start using load_unaligned_zeropad()
on architectures where it is available (i.e. architectures that
define CONFIG_DCACHE_WORD_ACCESS). Because load_unaligned_zeropad()
takes care of page boundaries as well as tag granule boundaries,
also disable the code preventing crossing page boundaries when using
load_unaligned_zeropad().
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/If4b22e43b5a4ca49726b4bf98ada827fdf755548
Fixes: 94ab5b61ee16 ("kasan, arm64: enable CONFIG_KASAN_HW_TAGS")
Cc: stable@vger.kernel.org
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250403000703.2584581-2-pcc@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
As more tests are added, the exit function gets longer than it should
be. Condense the un-register calls into a for loop to make it easier to
add/remove tests.
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
As we add more test functions in lib/tests_sysctl the main test function
(test_sysctl_init) grows. Condense the logic to make it easier to
add/remove tests.
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
If the test added in commit b5ffbd139688 ("sysctl: move the extra1/2
boundary check of u8 to sysctl_check_table_array") is run as a module, a
lingering reference to the module is left behind, and a 'sysctl -a'
leads to a panic.
To reproduce
CONFIG_KUNIT=y
CONFIG_SYSCTL_KUNIT_TEST=m
Then run these commands:
modprobe sysctl-test
rmmod sysctl-test
sysctl -a
The panic varies but generally looks something like this:
BUG: unable to handle page fault for address: ffffa4571c0c7db4
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 100000067 P4D 100000067 PUD 100351067 PMD 114f5e067 PTE 0
Oops: Oops: 0000 [#1] SMP NOPTI
... ... ...
RIP: 0010:proc_sys_readdir+0x166/0x2c0
... ... ...
Call Trace:
<TASK>
iterate_dir+0x6e/0x140
__se_sys_getdents+0x6e/0x100
do_syscall_64+0x70/0x150
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Move the test to lib/test_sysctl.c where the registration reference is
handled on module exit
Fixes: b5ffbd139688 ("sysctl: move the extra1/2 boundary check of u8 to sysctl_check_table_array")
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Merge series from James Calligeros <jcalligeros99@gmail.com>:
This series introduces a number of changes to the drivers for
the Texas Instruments TAS2764 and TAS2770 amplifiers in order to
introduce (and improve in the case of TAS2770) support for the
variants of these amps found in Apple Silicon Macs.
Apple's variant of TAS2764 is known as SN012776, and as always with
Apple is a subtly incompatible variant with a number of quirks. It
is not publicly available. The TAS2770 variant is known as TAS5770L,
and does not require incompatible handling.
Much as with the Cirrus codec patches, I do not
expect that we will get any official acknowledgement that these parts
exist from TI, however I would be delighted to be proven wrong.
This series has been living in the downstream Asahi kernel tree[1]
for over two years, and has been tested by many thousands of users
by this point[2].
v4 drops the TDM idle TX slot behaviour patches. I experimented with
the API discussed in v3, however this did not work on any of the machines
I tested it with. More tweaking is probably needed.
[1] https://github.com/AsahiLinux/linux/tree/asahi-wip
[2] https://stats.asahilinux.org/
|
|
alloc_pages_bulk_node() may partially succeed and allocate fewer than the
requested nr_pages. There are several conditions under which this can
occur, but we have encountered the case where CONFIG_PAGE_OWNER is enabled
causing all bulk allocations to always fallback to single page allocations
due to commit 187ad460b841 ("mm/page_alloc: avoid page allocator recursion
with pagesets.lock held").
Currently vm_module_tags_populate() immediately fails when
alloc_pages_bulk_node() returns fewer than the requested number of pages.
When this happens memory allocation profiling gets disabled, for example
[ 14.297583] [9: modprobe: 465] Failed to allocate memory for allocation tags in the module scsc_wlan. Memory allocation profiling is disabled!
[ 14.299339] [9: modprobe: 465] modprobe: Failed to insmod '/vendor/lib/modules/scsc_wlan.ko' with args '': Out of memory
This patch causes vm_module_tags_populate() to retry bulk allocations for
the remaining memory instead of failing immediately which will avoid the
disablement of memory allocation profiling.
Link: https://lkml.kernel.org/r/20250409225111.3770347-1-tjmercier@google.com
Fixes: 0f9b685626da ("alloc_tag: populate memory for module tags as needed")
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Reported-by: Janghyuck Kim <janghyuck.kim@samsung.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Modules without a description now cause a warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/tests/slub_kunit.o
Link: https://lkml.kernel.org/r/20250324173242.1501003-10-arnd@kernel.org
Fixes: 6c6c1fc09de3 ("modpost: require a MODULE_DESCRIPTION()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Guenetr Roeck <linux@roeck-us.net>
Cc: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Pei Xiao <xiaopei01@kylinos.cn>
Cc: Rae Moar <rmoar@google.com>
Cc: Stehen Rothwell <sfr@canb.auug.org.au>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Modules without a description now cause a warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/ucs2_string.o
Link: https://lkml.kernel.org/r/20250324173242.1501003-7-arnd@kernel.org
Fixes: 6c6c1fc09de3 ("modpost: require a MODULE_DESCRIPTION()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Stehen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Modules without a description now cause a warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/zlib_inflate/zlib_inflate.o
Link: https://lkml.kernel.org/r/20250324173242.1501003-6-arnd@kernel.org
Fixes: 6c6c1fc09de3 ("modpost: require a MODULE_DESCRIPTION()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Stehen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This is needed to avoid a build warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/asn1_decoder.o
Link: https://lkml.kernel.org/r/20250324173242.1501003-2-arnd@kernel.org
Fixes: 6c6c1fc09de3 ("modpost: require a MODULE_DESCRIPTION()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Stehen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When testing EROFS file-backed mount over v9fs on qemu, I encountered a
folio UAF issue. The page sanity check reports the following call trace.
The root cause is that pages in bvec are coalesced across a folio bounary.
The refcount of all non-slab folios should be increased to ensure
p9_releas_pages can put them correctly.
BUG: Bad page state in process md5sum pfn:18300
page: refcount:0 mapcount:0 mapping:00000000d5ad8e4e index:0x60 pfn:0x18300
head: order:0 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
aops:z_erofs_aops ino:30b0f dentry name(?):"GoogleExtServicesCn.apk"
flags: 0x100000000000041(locked|head|node=0|zone=1)
raw: 0100000000000041 dead000000000100 dead000000000122 ffff888014b13bd0
raw: 0000000000000060 0000000000000020 00000000ffffffff 0000000000000000
head: 0100000000000041 dead000000000100 dead000000000122 ffff888014b13bd0
head: 0000000000000060 0000000000000020 00000000ffffffff 0000000000000000
head: 0100000000000000 0000000000000000 ffffffffffffffff 0000000000000000
head: 0000000000000010 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
Call Trace:
dump_stack_lvl+0x53/0x70
bad_page+0xd4/0x220
__free_pages_ok+0x76d/0xf30
__folio_put+0x230/0x320
p9_release_pages+0x179/0x1f0
p9_virtio_zc_request+0xa2a/0x1230
p9_client_zc_rpc.constprop.0+0x247/0x700
p9_client_read_once+0x34d/0x810
p9_client_read+0xf3/0x150
v9fs_issue_read+0x111/0x360
netfs_unbuffered_read_iter_locked+0x927/0x1390
netfs_unbuffered_read_iter+0xa2/0xe0
vfs_iocb_iter_read+0x2c7/0x460
erofs_fileio_rq_submit+0x46b/0x5b0
z_erofs_runqueue+0x1203/0x21e0
z_erofs_readahead+0x579/0x8b0
read_pages+0x19f/0xa70
page_cache_ra_order+0x4ad/0xb80
filemap_readahead.isra.0+0xe7/0x150
filemap_get_pages+0x7aa/0x1890
filemap_read+0x320/0xc80
vfs_read+0x6c6/0xa30
ksys_read+0xf9/0x1c0
do_syscall_64+0x9e/0x1a0
entry_SYSCALL_64_after_hwframe+0x71/0x79
Link: https://lkml.kernel.org/r/20250401144712.1377719-1-shengyong1@xiaomi.com
Fixes: b9c0e49abfca ("mm: decline to manipulate the refcount on a slab page")
Signed-off-by: Sheng Yong <shengyong1@xiaomi.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC cleanups from Eric Biggers:
"Finish cleaning up the CRC kconfig options by removing the remaining
unnecessary prompts and an unnecessary 'default y', removing
CONFIG_LIBCRC32C, and documenting all the CRC library options"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crc: remove CONFIG_LIBCRC32C
lib/crc: document all the CRC library kconfig options
lib/crc: remove unnecessary prompt for CONFIG_CRC_ITU_T
lib/crc: remove unnecessary prompt for CONFIG_CRC_T10DIF
lib/crc: remove unnecessary prompt for CONFIG_CRC16
lib/crc: remove unnecessary prompt for CONFIG_CRC_CCITT
lib/crc: remove unnecessary prompt for CONFIG_CRC32 and drop 'default y'
|
|
Existing parse_inte_array_user() works with __user buffers only.
Separate array parsing from __user bits so the functionality can be
utilized with kernel buffers too.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250404090337.3564117-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Improve performance in gendwarfksyms
- Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS
- Support CONFIG_HEADERS_INSTALL for ARCH=um
- Use more relative paths to sources files for better reproducibility
- Support the loong64 Debian architecture
- Add Kbuild bash completion
- Introduce intermediate vmlinux.unstripped for architectures that need
static relocations to be stripped from the final vmlinux
- Fix versioning in Debian packages for -rc releases
- Treat missing MODULE_DESCRIPTION() as an error
- Convert Nios2 Makefiles to use the generic rule for built-in DTB
- Add debuginfo support to the RPM package
* tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
kbuild: rpm-pkg: build a debuginfo RPM
kconfig: merge_config: use an empty file as initfile
nios2: migrate to the generic rule for built-in DTB
rust: kbuild: skip `--remap-path-prefix` for `rustdoc`
kbuild: pacman-pkg: hardcode module installation path
kbuild: deb-pkg: don't set KBUILD_BUILD_VERSION unconditionally
modpost: require a MODULE_DESCRIPTION()
kbuild: make all file references relative to source root
x86: drop unnecessary prefix map configuration
kbuild: deb-pkg: add comment about future removal of KDEB_COMPRESS
kbuild: Add a help message for "headers"
kbuild: deb-pkg: remove "version" variable in mkdebian
kbuild: deb-pkg: fix versioning for -rc releases
Documentation/kbuild: Fix indentation in modules.rst example
x86: Get rid of Makefile.postlink
kbuild: Create intermediate vmlinux build with relocations preserved
kbuild: Introduce Kconfig symbol for linking vmlinux with relocations
kbuild: link-vmlinux.sh: Make output file name configurable
kbuild: do not generate .tmp_vmlinux*.map when CONFIG_VMLINUX_MAP=y
Revert "kheaders: Ignore silly-rename files"
...
|
|
Now that LIBCRC32C does nothing besides select CRC32, make every option
that selects LIBCRC32C instead select CRC32 directly. Then remove
LIBCRC32C.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250401221600.24878-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Previous commits removed all the original CRC kconfig help text, since
it was oriented towards people configuring the kernel, and the options
are no longer user-selectable. However, it's still useful for there to
be help text for kernel developers. Add this.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250401221600.24878-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
All modules that need CONFIG_CRC_ITU_T already select it, so there is no
need to bother users about the option.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250401221600.24878-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
All modules that need CONFIG_CRC_T10DIF already select it, so there is no
need to bother users about the option.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250401221600.24878-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
All modules that need CONFIG_CRC16 already select it, so there is no
need to bother users about the option.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250401221600.24878-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
All modules that need CONFIG_CRC_CCITT already select it, so there is no
need to bother users about the option.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250401221600.24878-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
All modules that need CONFIG_CRC32 already select it, so there is no
need to bother users about the option, nor to default it to y.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250401221600.24878-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more non-MM updates from Andrew Morton:
"One bugfix and a couple of small late-arriving updates"
* tag 'mm-nonmm-stable-2025-04-02-22-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib: scatterlist: fix sg_split_phys to preserve original scatterlist offsets
lib/sort.c: add _nonatomic() variants with cond_resched()
mailmap: add an entry for Nicolas Schier
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- The series "mm: fixes for fallouts from mem_init() cleanup" from Mike
Rapoport fixes a couple of issues with the just-merged "arch, mm:
reduce code duplication in mem_init()" series
- The series "MAINTAINERS: add my isub-entries to MM part." from Mike
Rapoport does some maintenance on MAINTAINERS
- The series "remove tlb_remove_page_ptdesc()" from Qi Zheng does some
cleanup work to the page mapping code
- The series "mseal system mappings" from Jeff Xu permits sealing of
"system mappings", such as vdso, vvar, vvar_vclock, vectors (arm
compat-mode), sigpage (arm compat-mode)
- Plus the usual shower of singleton patches
* tag 'mm-stable-2025-04-02-22-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
mseal sysmap: add arch-support txt
mseal sysmap: enable s390
selftest: test system mappings are sealed
mseal sysmap: update mseal.rst
mseal sysmap: uprobe mapping
mseal sysmap: enable arm64
mseal sysmap: enable x86-64
mseal sysmap: generic vdso vvar mapping
selftests: x86: test_mremap_vdso: skip if vdso is msealed
mseal sysmap: kernel config and header change
mm: pgtable: remove tlb_remove_page_ptdesc()
x86: pgtable: convert to use tlb_remove_ptdesc()
riscv: pgtable: unconditionally use tlb_remove_ptdesc()
mm: pgtable: convert some architectures to use tlb_remove_ptdesc()
mm: pgtable: change pt parameter of tlb_remove_ptdesc() to struct ptdesc*
mm: pgtable: make generic tlb_remove_table() use struct ptdesc
microblaze/mm: put mm_cmdline_setup() in .init.text section
mm/memory_hotplug: fix call folio_test_large with tail page in do_migrate_range
MAINTAINERS: mm: add entry for secretmem
MAINTAINERS: mm: add entry for numa memblocks and numa emulation
...
|
