| Age | Commit message (Collapse) | Author |
|---|
|
The node end is set during the walk, so use the resulting end instead of
re-fetching it.
Link: https://lkml.kernel.org/r/20231101171629.3612299-7-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When looking for the next entry, don't recalculate the node end as it is
now tracked in the maple state.
Link: https://lkml.kernel.org/r/20231101171629.3612299-6-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Analysis of the mas_for_each() iteration showed that there is a
significant time spent finding the end of a node. This time can be
greatly reduced if the end of the node is cached in the maple state. Care
must be taken to update & invalidate as necessary.
Link: https://lkml.kernel.org/r/20231101171629.3612299-5-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mas_erase() may not deal correctly with all maple states. Make the
function more robust by ensuring the state is in one of the two acceptable
states.
Link: https://lkml.kernel.org/r/20231101171629.3612299-3-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "maple_tree: iterator state changes".
These patches have some general cleanup and a change to separate the maple
state status tracking from the maple state node.
The maple state status change allows for walks to continue from previous
places when the status needs to be recorded to make logical sense for the
next call to the maple state. For instance, it allows for prev/next to
function in a way that better resembles the linked list. It also allows
switch statements to be used to detect missed states during compile, and
the addition of fast-path "active" state is cleaner as an enum.
While making the status change, perf showed some very small (one line)
functions that were not inlined even with the inline key word. Making
these small functions __always_inline is less expensive according to perf.
As part of that change, some inlines have been dropped from larger
functions.
Perf also showed that the commonly used mas_for_each() iterator was
spending a lot of time finding the end of the node. This series
introduces caching of the end of the node in the maple state (and updating
it during writes). This caching along with the inline changes yielded at
23.25% improvement on the BENCH_MAS_FOR_EACH maple tree test framework
benchmark.
I've also included a change to mtree_range_walk and mtree_lookup_walk to
take advantage of Peng's change [1] to the initial pivot setup.
mmtests did not produce any significant gains.
[1] https://lore.kernel.org/all/20230711035444.526-1-zhangpeng.00@bytedance.com/T/#u
This patch (of 12):
Removing the default types from the switch statements will cause compile
warnings on missing cases.
Link: https://lkml.kernel.org/r/20231101171629.3612299-2-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When destroying maple tree, preserve its attributes and then turn it into
an empty tree. This allows it to be reused without needing to be
reinitialized.
Link: https://lkml.kernel.org/r/20231027033845.90608-10-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce interfaces __mt_dup() and mtree_dup(), which are used to
duplicate a maple tree. They duplicate a maple tree in Depth-First Search
(DFS) pre-order traversal. It uses memcopy() to copy nodes in the source
tree and allocate new child nodes in non-leaf nodes. The new node is
exactly the same as the source node except for all the addresses stored in
it. It will be faster than traversing all elements in the source tree and
inserting them one by one into the new tree. The time complexity of these
two functions is O(n).
The difference between __mt_dup() and mtree_dup() is that mtree_dup()
handles locks internally.
Analysis of the average time complexity of this algorithm:
For simplicity, let's assume that the maximum branching factor of all
non-leaf nodes is 16 (in allocation mode, it is 10), and the tree is a
full tree.
Under the given conditions, if there is a maple tree with n elements, the
number of its leaves is n/16. From bottom to top, the number of nodes in
each level is 1/16 of the number of nodes in the level below. So the
total number of nodes in the entire tree is given by the sum of n/16 +
n/16^2 + n/16^3 + ... + 1. This is a geometric series, and it has log(n)
terms with base 16. According to the formula for the sum of a geometric
series, the sum of this series can be calculated as (n-1)/15. Each node
has only one parent node pointer, which can be considered as an edge. In
total, there are (n-1)/15-1 edges.
This algorithm consists of two operations:
1. Traversing all nodes in DFS order.
2. For each node, making a copy and performing necessary modifications
to create a new node.
For the first part, DFS traversal will visit each edge twice. Let
T(ascend) represent the cost of taking one step downwards, and T(descend)
represent the cost of taking one step upwards. And both of them are
constants (although mas_ascend() may not be, as it contains a loop, but
here we ignore it and treat it as a constant). So the time spent on the
first part can be represented as ((n-1)/15-1) * (T(ascend) + T(descend)).
For the second part, each node will be copied, and the cost of copying a
node is denoted as T(copy_node). For each non-leaf node, it is necessary
to reallocate all child nodes, and the cost of this operation is denoted
as T(dup_alloc). The behavior behind memory allocation is complex and not
specific to the maple tree operation. Here, we assume that the time
required for a single allocation is constant. Since the size of a node is
fixed, both of these symbols are also constants. We can calculate that
the time spent on the second part is ((n-1)/15) * T(copy_node) + ((n-1)/15
- n/16) * T(dup_alloc).
Adding both parts together, the total time spent by the algorithm can be
represented as:
((n-1)/15) * (T(ascend) + T(descend) + T(copy_node) + T(dup_alloc)) -
n/16 * T(dup_alloc) - (T(ascend) + T(descend))
Let C1 = T(ascend) + T(descend) + T(copy_node) + T(dup_alloc)
Let C2 = T(dup_alloc)
Let C3 = T(ascend) + T(descend)
Finally, the expression can be simplified as:
((16 * C1 - 15 * C2) / (15 * 16)) * n - (C1 / 15 + C3).
This is a linear function, so the average time complexity is O(n).
Link: https://lkml.kernel.org/r/20231027033845.90608-4-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Suggested-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Introduce __mt_dup() to improve the performance of fork()", v7.
This series introduces __mt_dup() to improve the performance of fork().
During the duplication process of mmap, all VMAs are traversed and
inserted one by one into the new maple tree, causing the maple tree to be
rebalanced multiple times. Balancing the maple tree is a costly
operation. To duplicate VMAs more efficiently, mtree_dup() and __mt_dup()
are introduced for the maple tree. They can efficiently duplicate a maple
tree.
Here are some algorithmic details about {mtree,__mt}_dup(). We perform a
DFS pre-order traversal of all nodes in the source maple tree. During
this process, we fully copy the nodes from the source tree to the new
tree. This involves memory allocation, and when encountering a new node,
if it is a non-leaf node, all its child nodes are allocated at once.
This idea was originally from Liam R. Howlett's Maple Tree Work email,
and I added some of my own ideas to implement it. Some previous
discussions can be found in [1]. For a more detailed analysis of the
algorithm, please refer to the logs for patch [3/10] and patch [10/10].
There is a "spawn" in byte-unixbench[2], which can be used to test the
performance of fork(). I modified it slightly to make it work with
different number of VMAs.
Below are the test results. The first row shows the number of VMAs. The
second and third rows show the number of fork() calls per ten seconds,
corresponding to next-20231006 and the this patchset, respectively. The
test results were obtained with CPU binding to avoid scheduler load
balancing that could cause unstable results. There are still some
fluctuations in the test results, but at least they are better than the
original performance.
21 121 221 421 821 1621 3221 6421 12821 25621 51221
112100 76261 54227 34035 20195 11112 6017 3161 1606 802 393
114558 83067 65008 45824 28751 16072 8922 4747 2436 1233 599
2.19% 8.92% 19.88% 34.64% 42.37% 44.64% 48.28% 50.17% 51.68% 53.74% 52.42%
Thanks to Liam and Matthew for the review.
This patch (of 10):
Add two helpers:
1. mt_free_one(), used to free a maple node.
2. mt_attr(), used to obtain the attributes of maple tree.
Link: https://lkml.kernel.org/r/20231027033845.90608-1-zhangpeng.00@bytedance.com
Link: https://lkml.kernel.org/r/20231027033845.90608-2-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Users complained about OOM errors during fork without triggering
compaction. This can be fixed by modifying the flags used in
mas_expected_entries() so that the compaction will be triggered in low
memory situations. Since mas_expected_entries() is only used during fork,
the extra argument does not need to be passed through.
Additionally, the two test_maple_tree test cases and one benchmark test
were altered to use the correct locking type so that allocations would not
trigger sleeping and thus fail. Testing was completed with lockdep atomic
sleep detection.
The additional locking change requires rwsem support additions to the
tools/ directory through the use of pthreads pthread_rwlock_t. With this
change test_maple_tree works in userspace, as a module, and in-kernel.
Users may notice that the system gave up early on attempting to start new
processes instead of attempting to reclaim memory.
Link: https://lkml.kernel.org/r/20230915093243epcms1p46fa00bbac1ab7b7dca94acb66c44c456@epcms1p4
Link: https://lkml.kernel.org/r/20231012155233.2272446-1-Liam.Howlett@oracle.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: <jason.sim@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When updating the maple tree iterator to avoid rewalks, an issue was
introduced when shifting beyond the limits. This can be seen by trying to
go to the previous address of 0, which would set the maple node to
MAS_NONE and keep the range as the last entry.
Subsequent calls to mas_find() would then search upwards from mas->last
and skip the value at mas->index/mas->last. This showed up as a bug in
mprotect which skips the actual VMA at the current range after attempting
to go to the previous VMA from 0.
Since MAS_NONE may already be set when searching for a value that isn't
contained within a node, changing the handling of MAS_NONE in mas_find()
would make the code more complicated and error prone. Furthermore, there
was no way to tell which limit was hit, and thus which action to take
(next or the entry at the current range).
This solution is to add two states to track what happened with the
previous iterator action. This allows for the expected behaviour of the
next command to return the correct item (either the item at the range
requested, or the next/previous).
Tests are also added and updated accordingly.
Link: https://lkml.kernel.org/r/20230921181236.509072-3-Liam.Howlett@oracle.com
Link: https://gist.github.com/heatd/85d2971fae1501b55b6ea401fbbe485b
Link: https://lore.kernel.org/linux-mm/20230921181236.509072-1-Liam.Howlett@oracle.com/
Fixes: 39193685d585 ("maple_tree: try harder to keep active node with mas_prev()")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Pedro Falcato <pedro.falcato@gmail.com>
Closes: https://gist.github.com/heatd/85d2971fae1501b55b6ea401fbbe485b
Closes: https://bugs.archlinux.org/task/79656
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Avoid setting the variables until necessary, and actually use the
variables where applicable. Introducing a variable for the slots array
avoids spanning multiple lines.
Add the missing argument to the documentation.
Use the node type when setting the metadata instead of blindly assuming
the type.
Finally, add a trace point to the function for successful store.
Link: https://lkml.kernel.org/r/20230819004356.1454718-3-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
The current implementation of append may cause duplicate data and/or
incorrect ranges to be returned to a reader during an update. Although
this has not been reported or seen, disable the append write operation
while the tree is in rcu mode out of an abundance of caution.
During the analysis of the mas_next_slot() the following was
artificially created by separating the writer and reader code:
Writer: reader:
mas_wr_append
set end pivot
updates end metata
Detects write to last slot
last slot write is to start of slot
store current contents in slot
overwrite old end pivot
mas_next_slot():
read end metadata
read old end pivot
return with incorrect range
store new value
Alternatively:
Writer: reader:
mas_wr_append
set end pivot
updates end metata
Detects write to last slot
last lost write to end of slot
store value
mas_next_slot():
read end metadata
read old end pivot
read new end pivot
return with incorrect range
set old end pivot
There may be other accesses that are not safe since we are now updating
both metadata and pointers, so disabling append if there could be rcu
readers is the safest action.
Link: https://lkml.kernel.org/r/20230819004356.1454718-2-Liam.Howlett@oracle.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Reorder the operations for split and spanning stores so that new data is
placed in the tree prior to marking the old data as dead. This will limit
re-walks on dead data to just once instead of a retry loop.
The order of operations is as follows: Create the new data, put the new
data in place, mark the top node of the old data as dead.
Then repair parent links in the reused nodes through all levels of the
tree, following the new nodes downwards. Finally walk the top dead node
looking for nodes that are no longer used, or subtrees that should be
destroyed (marked dead throughout then freed), follow the partially used
nodes downwards to discover other dead nodes and subtrees.
Link: https://lkml.kernel.org/r/20230804165951.2661157-7-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All calls to mas_adopt_children() currently pass the parent as the node in
the maple state. Allow for the parent pointer that is passed in to be
used instead.
Link: https://lkml.kernel.org/r/20230804165951.2661157-6-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a definition to shorten long code lines and clarify what the code is
doing. Use the new definition to get the maple tree parent pointer from
the maple state where possible.
Link: https://lkml.kernel.org/r/20230804165951.2661157-5-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mas_replace() has a single user that takes a flag which is now always
true. Replace this function with mas_put_in_tree() to better align with
mas_replace_node(). Inline the remaining logic into the only caller;
mas_wmb_replace().
Link: https://lkml.kernel.org/r/20230804165951.2661157-4-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replacing nodes may cause a live lock-up if CPU resources are saturated by
write operations on the tree by continuously retrying on dead nodes. To
avoid the continuous retry scenario, ensure the new node is inserted into
the tree prior to marking the old data as dead. This will define a window
where old and new data is swapped.
When reusing lower level nodes, ensure the parent pointer is updated after
the parent is marked dead. This ensures that the child is still reachable
from the top of the tree, but walking up to a dead node will result in a
single retry that will start a fresh walk from the top down through the
new node.
Link: https://lkml.kernel.org/r/20230804165951.2661157-3-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "maple_tree: Change replacement strategy".
The maple tree marks nodes dead as soon as they are going to be replaced.
This could be problematic when used in the RCU context since the writer
may be starved of CPU time by the readers. This patch set addresses the
issue by switching the data replacement strategy to one that will only
mark data as dead once the new data is available.
This series changes the ordering of the node replacement so that the new
data is live before the old data is marked 'dead'. When readers hit
'dead' nodes, they will restart from the top of the tree and end up in the
new data.
In more complex scenarios, the replacement strategy means a subtree is
built and graphed into the tree leaving some nodes to point to the old
parent. The view of tasks into the old data will either remain with the
old data, or see the new data once the old data is marked 'dead'.
Iterators will see the 'dead' node and restart on their own and switch to
the new data. There is no risk of the reader seeing old data in these
cases.
The 'dead' subtree of data is then fully marked dead, but reused nodes
will still point to the dead nodes until the parent pointer is updated.
Walking up to a 'dead' node will cause a re-walk from the top of the tree
and enter the new data area where old data is not reachable.
Once the parent pointers are fully up to date in the active data, the
'dead' subtree is iterated to collect entirely 'dead' subtrees, and dead
nodes (nodes that partially contained reused data).
This patch (of 6):
When dumping the tree, honour formatting request to output hex for the
maple node type arange64.
Link: https://lkml.kernel.org/r/20230804165951.2661157-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20230804165951.2661157-2-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mas_prealloc() may walk partially down the tree before finding that a
split or spanning store is needed. When the write occurs, relax the
logic on resetting the walk so that partial walks will not restart, but
walks that have gone too far (a store that affects beyond the current
node) should be restarted.
Link: https://lkml.kernel.org/r/20230724183157.3939892-15-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Calculate the number of nodes based on the pending write action instead
of assuming the worst case.
This addresses a performance regression introduced in platforms that
have longer allocation timing.
Link: https://lkml.kernel.org/r/20230724183157.3939892-14-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Relocate it and call mas_wr_extend_null() from within mas_wr_end_piv().
Extending the NULL may affect the end pivot value so call
mas_wr_endtend_null() from within mas_wr_end_piv() to keep it all
together.
Link: https://lkml.kernel.org/r/20230724183157.3939892-12-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mas_rebalance() is called to rebalance an insufficient node into a
single node or two sufficient nodes. The preallocation estimate is
always too many in this case as the height of the tree will never grow
and there is no possibility to have a three way split in this case, so
revise the node allocation count.
Link: https://lkml.kernel.org/r/20230724183157.3939892-9-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current preallocation strategy is to preallocate the absolute
worst-case allocation for a tree modification. The entry (or NULL) is
needed to know how many nodes are needed to write to the tree. Start by
adding the argument to the mas_preallocate() definition.
Link: https://lkml.kernel.org/r/20230724183157.3939892-8-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use lockdep to check the write path in the maple tree holds the lock in
write mode.
Introduce mt_write_lock_is_held() to check if the lock is held for
writing. Update the necessary checks for rcu_dereference_protected() to
use the new write lock check.
Link: https://lkml.kernel.org/r/20230714195551.894800-5-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oliver Sang <oliver.sang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace FGP_FLAGS with GFP_FLAGS
Link: https://lkml.kernel.org/r/20230715084038.987955-1-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace "Insert and entry at a give index" with "Insert an entry at a
given index"
Link: https://lkml.kernel.org/r/20230715143920.994812-1-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The internal function mas_first_entry() is no longer used, so drop it.
Link: https://lkml.kernel.org/r/20230711035444.526-9-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace mas_logical_pivot() with mas_safe_pivot() and drop
mas_logical_pivot() since it won't be used anymore. We can do this since
now all nodes will have node limit pivot (if it is not full node).
Link: https://lkml.kernel.org/r/20230711035444.526-8-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Instead of using mas_first_entry() to find the leftmost leaf, use a simple
loop instead. Remove an unneeded check for root node. To make the error
message more accurate, check pivots first and then slots, because checking
slots depend on the node limit pivot to break the loop.
Link: https://lkml.kernel.org/r/20230711035444.526-7-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update mas_validate_limits() to check root node, check node limit pivot if
there is enough room for it to exist and check data_end. Remove the check
for child existence as it is done in mas_validate_child_slot().
Link: https://lkml.kernel.org/r/20230711035444.526-6-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Don't break the loop before checking the last slot. Also here check if
non-leaf nodes are missing children.
Link: https://lkml.kernel.org/r/20230711035444.526-5-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Make mas_validate_gaps() check whether the offset in the metadata points
to the largest gap. By the way, simplify this function.
Add the verification that gaps beyond the node limit are zero.
Link: https://lkml.kernel.org/r/20230711035444.526-4-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Improve the validation for maple tree and some cleanup", v2.
This patch (of 7):
Do not use a special offset to indicate that there is no gap. When there
is no gap, offset can point to any valid slots because its gap is 0.
Link: https://lkml.kernel.org/r/20230711035444.526-1-zhangpeng.00@bytedance.com
Link: https://lkml.kernel.org/r/20230711035444.526-3-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When expanding a range in two directions, only partially overwriting the
previous and next ranges, the number of entries will not be increased, so
we can just update the pivots as a fast path. However, it may introduce
potential risks in RCU mode, because it updates two pivots. We only
enable it in non-RCU mode.
Link: https://lkml.kernel.org/r/20230628073657.75314-5-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the new range can be completely covered by the original last range
without touching the boundaries on both sides, two new entries can be
appended to the end as a fast path. We update the original last pivot at
the end, and the newly appended two entries will not be accessed before
this, so it is also safe in RCU mode.
This is useful for sequential insertion, which is what we do in
dup_mmap(). Enabling BENCH_FORK in test_maple_tree and just running
bench_forking() gives the following time-consuming numbers:
before: after:
17,874.83 msec 15,738.38 msec
It shows about a 12% performance improvement for duplicating VMAs.
Link: https://lkml.kernel.org/r/20230628073657.75314-4-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The documentation of mt_next() claims that it starts the search at the
provided index. That's incorrect as it starts the search after the
provided index.
The documentation of mt_find() is slightly confusing. "Handles locking"
is not really helpful as it does not explain how the "locking" works.
Also the documentation of index talks about a range, while in reality the
index is updated on a succesful search to the index of the found entry
plus one.
Fix similar issues for mt_find_after() and mt_prev().
Reword the confusing "Note: Will not return the zero entry." comment on
mt_for_each() and document @__index correctly.
Link: https://lkml.kernel.org/r/87ttw2n556.ffs@tglx
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Shanker Donthineni <sdonthineni@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Set the node limit of the root node so that the last pivot of all nodes is
the node limit (if the node is not full).
This patch also fixes a bug in mas_rev_awalk(). Effectively, always
setting a maximum makes mas_logical_pivot() behave as mas_safe_pivot().
Without this fix, it is possible that very small tasks would fail to find
the correct gap. Although this has not been observed with real tasks, it
has been reported to happen in m68k nommu running the maple tree tests.
Link: https://lkml.kernel.org/r/20230711035444.526-1-zhangpeng.00@bytedance.com
Link: https://lore.kernel.org/linux-mm/CAMuHMdV4T53fOw7VPoBgPR7fP6RYqf=CBhD_y_vOg53zZX_DnA@mail.gmail.com/
Link: https://lkml.kernel.org/r/20230711035444.526-2-zhangpeng.00@bytedance.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Simplify and clean up mas_wr_node_store(), remove unnecessary code.
Link: https://lkml.kernel.org/r/20230524031247.65949-10-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Get whether the two gaps to be overwritten are empty to avoid calling
mas_update_gap() all the time. Also clean up the code and add comments.
Link: https://lkml.kernel.org/r/20230524031247.65949-9-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add comment for mas_wr_append(), move mas_update_gap() into
mas_wr_append(), and other cleanups to make mas_wr_modify() cleaner.
Link: https://lkml.kernel.org/r/20230524031247.65949-8-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The previous new_end calculation is inaccurate, because it assumes that
two new pivots must be added (this is inaccurate), and sometimes it will
miss the fast path and enter the slow path. Add mas_wr_new_end() to
accurately calculate new_end to make the conditions for entering the fast
path more accurate.
Link: https://lkml.kernel.org/r/20230524031247.65949-7-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Just make the code symmetrical to improve readability.
Link: https://lkml.kernel.org/r/20230524031247.65949-6-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Make the code for detecting spanning writes more concise.
Link: https://lkml.kernel.org/r/20230524031247.65949-5-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix the arguments to __must_hold() to make sparse work.
Link: https://lkml.kernel.org/r/20230524031247.65949-4-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mas_{rev_}alloc() and mas_fill_gap() are no longer used, delete them.
Link: https://lkml.kernel.org/r/20230524031247.65949-3-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Clean ups for maple tree", v4.
Some clean ups, mainly to make the code of maple tree more concise.
This patchset has passed the self-test.
This patch (of 10):
Use mas_empty_area{_rev}() to refactor mtree_alloc_{range,rrange}()
Link: https://lkml.kernel.org/r/20230524031247.65949-2-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When there is a single entry tree (range of 0-0 pointing to an entry),
then ensure the limit is either 0-0 or 1-oo, depending on where the user
walks. Ensure the correct node setting as well; either MAS_ROOT or
MAS_NONE.
Link: https://lkml.kernel.org/r/20230518145544.1722059-33-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vernon Yang <vernon2gm@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Some users of the maple tree may want to move to the previous range
regardless of the value stored there. Add this interface as well as the
'find' variant to support walking to the first value, then iterating over
the previous ranges.
Link: https://lkml.kernel.org/r/20230518145544.1722059-32-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Vernon Yang <vernon2gm@gmail.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Sometimes the user needs to revert to the previous slot, regardless of if
it is empty or not. Add an interface to go to the previous slot.
Since there can't be two consecutive NULLs in the tree, the mas_prev()
function can be implemented by calling mas_prev_slot() a maximum of 2
times. Change the underlying interface to use mas_prev_slot() to align
the code.
Link: https://lkml.kernel.org/r/20230518145544.1722059-31-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vernon Yang <vernon2gm@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
