| Age | Commit message (Collapse) | Author |
|---|
|
The CPU state tracking and synchronization mechanism in smpboot.c is
completely independent of the hotplug code and all logic around it is
implemented in architecture specific code.
Except for the state reporting of the AP there is absolutely nothing
architecture specific and the sychronization and decision functions can be
moved into the generic hotplug core code.
Provide an integrated variant and add the core synchronization and decision
points. This comes in two flavours:
1) DEAD state synchronization
Updated by the architecture code once the AP reaches the point where
it is ready to be torn down by the control CPU, e.g. by removing power
or clocks or tear down via the hypervisor.
The control CPU waits for this state to be reached with a timeout. If
the state is reached an architecture specific cleanup function is
invoked.
2) Full state synchronization
This extends #1 with AP alive synchronization. This is new
functionality, which allows to replace architecture specific wait
mechanims, e.g. cpumasks, completely.
It also prevents that an AP which is in a limbo state can be brought
up again. This can happen when an AP failed to report dead state
during a previous off-line operation.
The dead synchronization is what most architectures use. Only x86 makes a
bringup decision based on that state at the moment.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://lore.kernel.org/r/20230512205256.476305035@linutronix.de
|
|
There is no harm to hold sparse_irq lock until the upcoming CPU completes
in cpuhp_online_idle(). This allows to remove cpu_online() synchronization
from architecture code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://lore.kernel.org/r/20230512205256.263722880@linutronix.de
|
|
No point in keeping them around.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://lore.kernel.org/r/20230512205255.551974164@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Make sure __down_read_common() is always inlined so that the callers'
names land in traceevents output and thus the blocked function can be
identified
* tag 'locking_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Add __always_inline annotation to __down_read_common() and inlined callers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Make sure the PEBS buffer is flushed before reprogramming the
hardware so that the correct record sizes are used
- Update the sample size for AMD BRS events
- Fix a confusion with using the same on-stack struct with different
events in the event processing path
* tag 'perf_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG
perf/x86: Fix missing sample size update on AMD BRS
perf/core: Fix perf_sample_data not properly initialized for different swevents in perf_tp_event()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Fix a couple of kernel-doc warnings
* tag 'sched_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: fix cid_lock kernel-doc warnings
|
|
With the way the hooks implemented right now, we have a special
condition: optval larger than PAGE_SIZE will expose only first 4k into
BPF; any modifications to the optval are ignored. If the BPF program
doesn't handle this condition by resetting optlen to 0,
the userspace will get EFAULT.
The intention of the EFAULT was to make it apparent to the
developers that the program is doing something wrong.
However, this inadvertently might affect production workloads
with the BPF programs that are not too careful (i.e., returning EFAULT
for perfectly valid setsockopt/getsockopt calls).
Let's try to minimize the chance of BPF program screwing up userspace
by ignoring the output of those BPF programs (instead of returning
EFAULT to the userspace). pr_info_once those cases to
the dmesg to help with figuring out what's going wrong.
Fixes: 0d01da6afc54 ("bpf: implement getsockopt and setsockopt hooks")
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230511170456.1759459-2-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
KCSAN reported a data-race when accessing node->ref.
Although node->ref does not have to be accurate,
take this chance to use a more common READ_ONCE() and WRITE_ONCE()
pattern instead of data_race().
There is an existing bpf_lru_node_is_ref() and bpf_lru_node_set_ref().
This patch also adds bpf_lru_node_clear_ref() to do the
WRITE_ONCE(node->ref, 0) also.
==================================================================
BUG: KCSAN: data-race in __bpf_lru_list_rotate / __htab_lru_percpu_map_update_elem
write to 0xffff888137038deb of 1 bytes by task 11240 on cpu 1:
__bpf_lru_node_move kernel/bpf/bpf_lru_list.c:113 [inline]
__bpf_lru_list_rotate_active kernel/bpf/bpf_lru_list.c:149 [inline]
__bpf_lru_list_rotate+0x1bf/0x750 kernel/bpf/bpf_lru_list.c:240
bpf_lru_list_pop_free_to_local kernel/bpf/bpf_lru_list.c:329 [inline]
bpf_common_lru_pop_free kernel/bpf/bpf_lru_list.c:447 [inline]
bpf_lru_pop_free+0x638/0xe20 kernel/bpf/bpf_lru_list.c:499
prealloc_lru_pop kernel/bpf/hashtab.c:290 [inline]
__htab_lru_percpu_map_update_elem+0xe7/0x820 kernel/bpf/hashtab.c:1316
bpf_percpu_hash_update+0x5e/0x90 kernel/bpf/hashtab.c:2313
bpf_map_update_value+0x2a9/0x370 kernel/bpf/syscall.c:200
generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1687
bpf_map_do_batch+0x2d9/0x3d0 kernel/bpf/syscall.c:4534
__sys_bpf+0x338/0x810
__do_sys_bpf kernel/bpf/syscall.c:5096 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5094 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5094
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff888137038deb of 1 bytes by task 11241 on cpu 0:
bpf_lru_node_set_ref kernel/bpf/bpf_lru_list.h:70 [inline]
__htab_lru_percpu_map_update_elem+0x2f1/0x820 kernel/bpf/hashtab.c:1332
bpf_percpu_hash_update+0x5e/0x90 kernel/bpf/hashtab.c:2313
bpf_map_update_value+0x2a9/0x370 kernel/bpf/syscall.c:200
generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1687
bpf_map_do_batch+0x2d9/0x3d0 kernel/bpf/syscall.c:4534
__sys_bpf+0x338/0x810
__do_sys_bpf kernel/bpf/syscall.c:5096 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5094 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5094
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x01 -> 0x00
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 11241 Comm: syz-executor.3 Not tainted 6.3.0-rc7-syzkaller-00136-g6a66fdd29ea1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023
==================================================================
Reported-by: syzbot+ebe648a84e8784763f82@syzkaller.appspotmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230511043748.1384166-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Running the 'kfree_rcu_test' test case [1] results in a splat [2].
The root cause is the kfree_scale_thread thread(s) continue running
after unloading the rcuscale module. This commit fixes that isue by
invoking kfree_scale_cleanup() from rcu_scale_cleanup() when removing
the rcuscale module.
[1] modprobe rcuscale kfree_rcu_test=1
// After some time
rmmod rcuscale
rmmod torture
[2] BUG: unable to handle page fault for address: ffffffffc0601a87
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0010) - not-present page
PGD 11de4f067 P4D 11de4f067 PUD 11de51067 PMD 112f4d067 PTE 0
Oops: 0010 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 1798 Comm: kfree_scale_thr Not tainted 6.3.0-rc1-rcu+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
RIP: 0010:0xffffffffc0601a87
Code: Unable to access opcode bytes at 0xffffffffc0601a5d.
RSP: 0018:ffffb25bc2e57e18 EFLAGS: 00010297
RAX: 0000000000000000 RBX: ffffffffc061f0b6 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff962fd0de RDI: ffffffff962fd0de
RBP: ffffb25bc2e57ea8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000000 R14: 000000000000000a R15: 00000000001c1dbe
FS: 0000000000000000(0000) GS:ffff921fa2200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffc0601a5d CR3: 000000011de4c006 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? kvfree_call_rcu+0xf0/0x3a0
? kthread+0xf3/0x120
? kthread_complete_and_exit+0x20/0x20
? ret_from_fork+0x1f/0x30
</TASK>
Modules linked in: rfkill sunrpc ... [last unloaded: torture]
CR2: ffffffffc0601a87
---[ end trace 0000000000000000 ]---
Fixes: e6e78b004fa7 ("rcuperf: Add kfree_rcu() performance Tests")
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This code-movement-only commit moves the rcu_scale_cleanup() and
rcu_scale_shutdown() functions to follow kfree_scale_cleanup().
This is code movement is in preparation for a bug-fix patch that invokes
kfree_scale_cleanup() from rcu_scale_cleanup().
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
This commit adds a long_hold module parameter to allow testing diagnostics
for excessive lock-hold times. Also adjust torture_param() invocations
for longer line length while in the area.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
Callbacks can only be queued as lazy on NOCB CPUs, therefore iterating
over the NOCB mask is enough for both counting and scanning. Just lock
the mostly uncontended barrier mutex on counting as well in order to
keep rcu_nocb_mask stable.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The rcu_tasks_invoke_cbs() function relies on queue_work_on() to silently
fall back to WORK_CPU_UNBOUND when the specified CPU is offline. However,
the queue_work_on() function's silent fallback mechanism relies on that
CPU having been online at some time in the past. When queue_work_on()
is passed a CPU that has never been online, workqueue lockups ensue,
which can be bad for your kernel's general health and well-being.
This commit therefore checks whether a given CPU has ever been online,
and, if not substitutes WORK_CPU_UNBOUND in the subsequent call to
queue_work_on(). Why not simply omit the queue_work_on() call entirely?
Because this function is flooding callback-invocation notifications
to all CPUs, and must deal with possibilities that include a sparse
cpu_possible_mask.
This commit also moves the setting of the rcu_data structure's
->beenonline field to rcu_cpu_starting(), which executes on the
incoming CPU before that CPU has ever enabled interrupts. This ensures
that the required workqueues are present. In addition, because the
incoming CPU has not yet enabled its interrupts, there cannot yet have
been any softirq handlers running on this CPU, which means that the
WARN_ON_ONCE(!rdp->beenonline) within the RCU_SOFTIRQ handler cannot
have triggered yet.
Fixes: d363f833c6d88 ("rcu-tasks: Use workqueues for multiple rcu_tasks_invoke_cbs() invocations")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, rcu_cpu_starting() is written so that it might be invoked
with interrupts enabled. However, it is always called when interrupts
are disabled, either by rcu_init(), notify_cpu_starting(), or from a
call point prior to the call to notify_cpu_starting().
But why bother requiring that interrupts be disabled? The purpose is
to allow the rcu_data structure's ->beenonline flag to be set after all
early processing has completed for the incoming CPU, thus allowing this
flag to be used to determine when workqueues have been set up for the
incoming CPU, while still allowing this flag to be used as a diagnostic
within rcu_core().
This commit therefore makes rcu_cpu_starting() rely on interrupts being
disabled.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The rcu_data structure's ->rcu_cpu_has_work field can be modified by
any CPU attempting to wake up the rcuc kthread. Therefore, this commit
marks accesses to this field from the rcu_cpu_kthread() function.
This data race was reported by KCSAN. Not appropriate for backporting
due to failure being unlikely.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The per-CPU rcu_data structure's ->cpu_no_qs.b.exp field is updated
only on the instance corresponding to the current CPU, but can be read
more widely. Unmarked accesses are OK from the corresponding CPU, but
only if interrupts are disabled, given that interrupt handlers can and
do modify this field.
Unfortunately, although the load from rcu_preempt_deferred_qs() is always
carried out from the corresponding CPU, interrupts are not necessarily
disabled. This commit therefore upgrades this load to READ_ONCE.
Similarly, the diagnostic access from synchronize_rcu_expedited_wait()
might run with interrupts disabled and from some other CPU. This commit
therefore marks this load with data_race().
Finally, the C-language access in rcu_preempt_ctxt_queue() is OK as
is because interrupts are disabled and this load is always from the
corresponding CPU. This commit adds a comment giving the rationale for
this access being safe.
This data race was reported by KCSAN. Not appropriate for backporting
due to failure being unlikely.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, if there are more than 100 ready-to-invoke RCU callbacks queued
on a given CPU, the rcu_do_batch() function sets a timeout for invocation
of the series. This timeout defaulting to three milliseconds, and may
be adjusted using the rcutree.rcu_resched_ns kernel boot parameter.
This timeout is checked using local_clock(), but the overhead of this
function combined with the common-case very small callback-invocation
overhead means that local_clock() is checked every 32nd invocation.
This works well except for longer-than average callbacks. For example,
a series of 500-microsecond-duration callbacks means that local_clock()
is checked only once every 16 milliseconds, which makes it difficult to
enforce a three-millisecond timeout.
This commit therefore adds a Kconfig option RCU_DOUBLE_CHECK_CB_TIME
that enables backup timeout checking using the coarser grained but
lighter weight jiffies. If the jiffies counter detects a timeout,
then local_clock() is consulted even if this is not the 32nd callback.
This prevents the aforementioned 16-millisecond latency blow.
Reported-by: Domas Mituzas <dmituzas@meta.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, a callback-invocation time limit is enforced only for
callbacks invoked from the softirq environment, the rationale being
that when callbacks are instead invoked from rcuc and rcuoc kthreads,
these callbacks cannot be holding up other softirq vectors.
Which is in fact true. However, if an rcuc kthread spends too much time
invoking callbacks, it can delay quiescent-state reports from its CPU,
which can also be a problem.
This commit therefore applies the callback-invocation time limit to
callback invocation from the rcuc kthreads as well as from softirq.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit uses rtp->name instead of __func__ and outputs the value
of rcu_task_cb_adjust, thus reducing console-log output.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
pr_info() is called with rtp->cbs_gbl_lock spin lock locked. Because
pr_info() calls printk() that might sleep, this will result in BUG
like below:
[ 0.206455] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.206463]
[ 0.206464] =============================
[ 0.206464] [ BUG: Invalid wait context ]
[ 0.206465] 5.19.0-00428-g9de1f9c8ca51 #5 Not tainted
[ 0.206466] -----------------------------
[ 0.206466] swapper/0/1 is trying to lock:
[ 0.206467] ffffffffa0167a58 (&port_lock_key){....}-{3:3}, at: serial8250_console_write+0x327/0x4a0
[ 0.206473] other info that might help us debug this:
[ 0.206473] context-{5:5}
[ 0.206474] 3 locks held by swapper/0/1:
[ 0.206474] #0: ffffffff9eb597e0 (rcu_tasks.cbs_gbl_lock){....}-{2:2}, at: cblist_init_generic.constprop.0+0x14/0x1f0
[ 0.206478] #1: ffffffff9eb579c0 (console_lock){+.+.}-{0:0}, at: _printk+0x63/0x7e
[ 0.206482] #2: ffffffff9ea77780 (console_owner){....}-{0:0}, at: console_emit_next_record.constprop.0+0x111/0x330
[ 0.206485] stack backtrace:
[ 0.206486] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-00428-g9de1f9c8ca51 #5
[ 0.206488] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
[ 0.206489] Call Trace:
[ 0.206490] <TASK>
[ 0.206491] dump_stack_lvl+0x6a/0x9f
[ 0.206493] __lock_acquire.cold+0x2d7/0x2fe
[ 0.206496] ? stack_trace_save+0x46/0x70
[ 0.206497] lock_acquire+0xd1/0x2f0
[ 0.206499] ? serial8250_console_write+0x327/0x4a0
[ 0.206500] ? __lock_acquire+0x5c7/0x2720
[ 0.206502] _raw_spin_lock_irqsave+0x3d/0x90
[ 0.206504] ? serial8250_console_write+0x327/0x4a0
[ 0.206506] serial8250_console_write+0x327/0x4a0
[ 0.206508] console_emit_next_record.constprop.0+0x180/0x330
[ 0.206511] console_unlock+0xf7/0x1f0
[ 0.206512] vprintk_emit+0xf7/0x330
[ 0.206514] _printk+0x63/0x7e
[ 0.206516] cblist_init_generic.constprop.0.cold+0x24/0x32
[ 0.206518] rcu_init_tasks_generic+0x5/0xd9
[ 0.206522] kernel_init_freeable+0x15b/0x2a2
[ 0.206523] ? rest_init+0x160/0x160
[ 0.206526] kernel_init+0x11/0x120
[ 0.206527] ret_from_fork+0x1f/0x30
[ 0.206530] </TASK>
[ 0.207018] cblist_init_generic: Setting shift to 1 and lim to 1.
This patch moves pr_info() so that it is called without
rtp->cbs_gbl_lock locked.
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The ->lazy_len is only checked locklessly. Recheck again under the
->nocb_lock to avoid spending more time on flushing/waking if not
necessary. The ->lazy_len can still increment concurrently (from 1 to
infinity) but under the ->nocb_lock we at least know for sure if there
are lazy callbacks at all (->lazy_len > 0).
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The shrinker resets the lazy callbacks counter in order to trigger the
pending lazy queue flush though the rcuog kthread. The counter reset is
protected by the ->nocb_lock against concurrent accesses...except
for one of them. Here is a list of existing synchronized readers/writer:
1) The first lazy enqueuer (incrementing ->lazy_len to 1) does so under
->nocb_lock and ->nocb_bypass_lock.
2) The further lazy enqueuers (incrementing ->lazy_len above 1) do so
under ->nocb_bypass_lock _only_.
3) The lazy flush checks and resets to 0 under ->nocb_lock and
->nocb_bypass_lock.
The shrinker protects its ->lazy_len reset against cases 1) and 3) but
not against 2). As such, setting ->lazy_len to 0 under the ->nocb_lock
may be cancelled right away by an overwrite from an enqueuer, leading
rcuog to ignore the flush.
To avoid that, use the proper bypass flush API which takes care of all
those details.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The shrinker may run concurrently with callbacks (de-)offloading. As
such, calling rcu_nocb_lock() is very dangerous because it does a
conditional locking. The worst outcome is that rcu_nocb_lock() doesn't
lock but rcu_nocb_unlock() eventually unlocks, or the reverse, creating
an imbalance.
Fix this with protecting against (de-)offloading using the barrier mutex.
Although if the barrier mutex is contended, which should be rare, then
step aside so as not to trigger a mutex VS allocation
dependency chain.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
If the rcutree.rcu_min_cached_objs kernel boot parameter is set to zero,
then krcp->page_cache_work will never be triggered to fill page cache.
In addition, the put_cached_bnode() will not fill page cache. As a
result krcp->bkvcache will always be empty, so there is no need to acquire
krcp->lock to get page from krcp->bkvcache. This commit therefore makes
drain_page_cache() return immediately if the rcu_min_cached_objs is zero.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
When the fill_page_cache_func() function is invoked, it assumes that
the cache of pages is completely empty. However, there can be some time
between triggering execution of this function and its actual invocation.
During this time, kfree_rcu_work() might run, and might fill in part or
all of this cache of pages, thus invalidating the fill_page_cache_func()
function's assumption.
This will not overfill the cache because put_cached_bnode() will reject
the extra page. However, it will result in a needless allocation and
freeing of one extra page, which might not be helpful under lowish-memory
conditions.
This commit therefore causes the fill_page_cache_func() to explicitly
account for pages that have been placed into the cache shortly before
it starts running.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
By default the cache size is 5 pages per CPU, but it can be disabled at
boot time by setting the rcu_min_cached_objs to zero. When that happens,
the current code will uselessly set an hrtimer to schedule refilling this
cache with zero pages. This commit therefore streamlines this process
by simply refusing the set the hrtimer when rcu_min_cached_objs is zero.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The add_ptr_to_bulk_krc_lock() function is invoked to allocate a new
kfree_rcu() page, also known as a kvfree_rcu_bulk_data structure.
The kfree_rcu_cpu structure's lock is used to protect this operation,
except that this lock must be momentarily dropped when allocating memory.
It is clearly important that the lock that is reacquired be the same
lock that was acquired initially via krc_this_cpu_lock().
Unfortunately, this same krc_this_cpu_lock() function is used to
re-acquire this lock, and if the task migrated to some other CPU during
the memory allocation, this will result in the kvfree_rcu_bulk_data
structure being added to the wrong CPU's kfree_rcu_cpu structure.
This commit therefore replaces that second call to krc_this_cpu_lock()
with raw_spin_lock_irqsave() in order to explicitly acquire the lock on
the correct kfree_rcu_cpu structure, thus keeping things straight even
when the task migrates.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
If kvfree_rcu_bulk() sees that the required grace period has failed to
elapse, it leaks the memory because readers might still be using it.
But in that case, the debug-objects subsystem still marks the relevant
structures as having been freed, even though they are instead being
leaked.
This commit fixes this mismatch by invoking debug_rcu_bhead_unqueue()
only when we are actually going to free the objects.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Under low-memory conditions, kvfree_rcu() will use each object's
rcu_head structure to queue objects in a singly linked list headed by
the kfree_rcu_cpu structure's ->head field. This list is passed to
call_rcu() as a unit, but there is no indication of which grace period
this list needs to wait for. This in turn prevents adding debug checks
in the kfree_rcu_work() as was done for the two page-of-pointers channels
in the kfree_rcu_cpu structure.
This commit therefore adds a ->head_free_gp_snap field to the
kfree_rcu_cpu_work structure to record this grace-period number. It also
adds a WARN_ON_ONCE() to kfree_rcu_monitor() that checks to make sure
that the required grace period has in fact elapsed.
[ paulmck: Fix kerneldoc issue raised by Stephen Rothwell. ]
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds debugging checks to verify that the required RCU
grace period has elapsed for each kvfree_rcu_bulk_data structure that
arrives at the kvfree_rcu_bulk() function. These checks make use
of that structure's ->gp_snap field, which has been upgraded from an
unsigned long to an rcu_gp_oldstate structure. This upgrade reduces
the chances of false positives to nearly zero, even on 32-bit systems,
for which this structure carries 64 bits of state.
Cc: Ziwei Dai <ziwei.dai@unisoc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This reverts the following commits:
4cd13c21b207 ("softirq: Let ksoftirqd do its job")
3c53776e29f8 ("Mark HI and TASKLET softirq synchronous")
1342d8080f61 ("softirq: Don't skip softirq execution when softirq thread is parking")
in a single change to avoid known bad intermediate states introduced by a
patch series reverting them individually.
Due to the mentioned commit, when the ksoftirqd threads take charge of
softirq processing, the system can experience high latencies.
In the past a few workarounds have been implemented for specific
side-effects of the initial ksoftirqd enforcement commit:
commit 1ff688209e2e ("watchdog: core: make sure the watchdog_worker is not deferred")
commit 8d5755b3f77b ("watchdog: softdog: fire watchdog even if softirqs do not get to run")
commit 217f69743681 ("net: busy-poll: allow preemption in sk_busy_loop()")
commit 3c53776e29f8 ("Mark HI and TASKLET softirq synchronous")
But the latency problem still exists in real-life workloads, see the link
below.
The reverted commit intended to solve a live-lock scenario that can now be
addressed with the NAPI threaded mode, introduced with commit 29863d41bb6e
("net: implement threaded-able napi poll loop support"), which is nowadays
in a pretty stable status.
While a complete solution to put softirq processing under nice resource
control would be preferable, that has proven to be a very hard task. In
the short term, remove the main pain point, and also simplify a bit the
current softirq implementation.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/netdev/305d7742212cbe98621b16be782b0562f1012cb6.camel@redhat.com
Link: https://lore.kernel.org/r/57e66b364f1b6f09c9bc0316742c3b14f4ce83bd.1683526542.git.pabeni@redhat.com
|
|
The current queue_work_on() docbook comment says that the caller must
ensure that the specified CPU can't go away, and further says that the
penalty for failing to nail down the specified CPU is that the workqueue
handler might find itself executing on some other CPU. This is true
as far as it goes, but fails to note what happens if the specified CPU
never was online. Therefore, further expand this comment to say that
specifying a CPU that was never online will result in a splat.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
cpuset_can_attach() can fail. Postpone DL BW allocation until all tasks
have been checked. DL BW is not allocated per-task but as a sum over
all DL tasks migrating.
If multiple controllers are attached to the cgroup next to the cpuset
controller a non-cpuset can_attach() can fail. In this case free DL BW
in cpuset_cancel_attach().
Finally, update cpuset DL task count (nr_deadline_tasks) only in
cpuset_attach().
Suggested-by: Waiman Long <longman@redhat.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
While moving a set of tasks between exclusive cpusets,
cpuset_can_attach() -> task_can_attach() calls dl_cpu_busy(..., p) for
DL BW overflow checking and per-task DL BW allocation on the destination
root_domain for the DL tasks in this set.
This approach has the issue of not freeing already allocated DL BW in
the following error cases:
(1) The set of tasks includes multiple DL tasks and DL BW overflow
checking fails for one of the subsequent DL tasks.
(2) Another controller next to the cpuset controller which is attached
to the same cgroup fails in its can_attach().
To address this problem rework dl_cpu_busy():
(1) Split it into dl_bw_check_overflow() & dl_bw_alloc() and add a
dedicated dl_bw_free().
(2) dl_bw_alloc() & dl_bw_free() take a `u64 dl_bw` parameter instead of
a `struct task_struct *p` used in dl_cpu_busy(). This allows to
allocate DL BW for a set of tasks too rather than only for a single
task.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
update_tasks_root_domain currently iterates over all tasks even if no
DEADLINE task is present on the cpuset/root domain for which bandwidth
accounting is being rebuilt. This has been reported to introduce 10+ ms
delays on suspend-resume operations.
Skip the costly iteration for cpusets that don't contain DEADLINE tasks.
Reported-by: Qais Yousef <qyousef@layalina.io>
Link: https://lore.kernel.org/lkml/20230206221428.2125324-1-qyousef@layalina.io/
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Qais reported that iterating over all tasks when rebuilding root domains
for finding out which ones are DEADLINE and need their bandwidth
correctly restored on such root domains can be a costly operation (10+
ms delays on suspend-resume).
To fix the problem keep track of the number of DEADLINE tasks belonging
to each cpuset and then use this information (followup patch) to only
perform the above iteration if DEADLINE tasks are actually present in
the cpuset for which a corresponding root domain is being rebuilt.
Reported-by: Qais Yousef <qyousef@layalina.io>
Link: https://lore.kernel.org/lkml/20230206221428.2125324-1-qyousef@layalina.io/
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Turns out percpu_cpuset_rwsem - commit 1243dc518c9d ("cgroup/cpuset:
Convert cpuset_mutex to percpu_rwsem") - wasn't such a brilliant idea,
as it has been reported to cause slowdowns in workloads that need to
change cpuset configuration frequently and it is also not implementing
priority inheritance (which causes troubles with realtime workloads).
Convert percpu_cpuset_rwsem back to regular cpuset_mutex. Also grab it
only for SCHED_DEADLINE tasks (other policies don't care about stable
cpusets anyway).
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
rebuild_root_domains() and update_tasks_root_domain() have neutral
names, but actually deal with DEADLINE bandwidth accounting.
Rename them to use 'dl_' prefix so that intent is more clear.
No functional change.
Suggested-by: Qais Yousef <qyousef@layalina.io>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
When a tick broadcast clockevent device is initialized for one shot mode
then tick_broadcast_setup_oneshot() OR's the periodic broadcast mode
cpumask into the oneshot broadcast cpumask.
This is required when switching from periodic broadcast mode to oneshot
broadcast mode to ensure that CPUs which are waiting for periodic
broadcast are woken up on the next tick.
But it is subtly broken, when an active broadcast device is replaced and
the system is already in oneshot (NOHZ/HIGHRES) mode. Victor observed
this and debugged the issue.
Then the OR of the periodic broadcast CPU mask is wrong as the periodic
cpumask bits are sticky after tick_broadcast_enable() set it for a CPU
unless explicitly cleared via tick_broadcast_disable().
That means that this sets all other CPUs which have tick broadcasting
enabled at that point unconditionally in the oneshot broadcast mask.
If the affected CPUs were already idle and had their bits set in the
oneshot broadcast mask then this does no harm. But for non idle CPUs
which were not set this corrupts their state.
On their next invocation of tick_broadcast_enable() they observe the bit
set, which indicates that the broadcast for the CPU is already set up.
As a consequence they fail to update the broadcast event even if their
earliest expiring timer is before the actually programmed broadcast
event.
If the programmed broadcast event is far in the future, then this can
cause stalls or trigger the hung task detector.
Avoid this by telling tick_broadcast_setup_oneshot() explicitly whether
this is the initial switch over from periodic to oneshot broadcast which
must take the periodic broadcast mask into account. In the case of
initialization of a replacement device this prevents that the broadcast
oneshot mask is modified.
There is a second problem with broadcast device replacement in this
function. The broadcast device is only armed when the previous state of
the device was periodic.
That is correct for the switch from periodic broadcast mode to oneshot
broadcast mode as the underlying broadcast device could operate in
oneshot state already due to lack of periodic state in hardware. In that
case it is already armed to expire at the next tick.
For the replacement case this is wrong as the device is in shutdown
state. That means that any already pending broadcast event will not be
armed.
This went unnoticed because any CPU which goes idle will observe that
the broadcast device has an expiry time of KTIME_MAX and therefore any
CPUs next timer event will be earlier and cause a reprogramming of the
broadcast device. But that does not guarantee that the events of the
CPUs which were already in idle are delivered on time.
Fix this by arming the newly installed device for an immediate event
which will reevaluate the per CPU expiry times and reprogram the
broadcast device accordingly. This is simpler than caching the last
expiry time in yet another place or saving it before the device exchange
and handing it down to the setup function. Replacement of broadcast
devices is not a frequent operation and usually happens once somewhere
late in the boot process.
Fixes: 9c336c9935cf ("tick/broadcast: Allow late registered device to enter oneshot mode")
Reported-by: Victor Hassan <victor@allwinnertech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/87pm7d2z1i.ffs@tglx
|
|
Commit e6fe3f422be1 ("sched: Make multiple runqueue task counters
32-bit") changed the type for rq->nr_uninterruptible from "unsigned
long" to "unsigned int", but left wrong cast print to
/sys/kernel/debug/sched/debug and to the console.
For example, nr_uninterruptible's value is fffffff7 with type
"unsigned int", (long)nr_uninterruptible shows 4294967287 while
(int)nr_uninterruptible prints -9. So using int cast fixes wrong
printing.
Signed-off-by: Yan Yan <yanyan.yan@antgroup.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230506074253.44526-1-yanyan.yan@antgroup.com
|
|
When a degenerate cluster domain for core with SMT CPUs is removed,
the SD_SHARE_CPUCAPACITY flag in the local child sched group was not
propagated to the new parent. We need this flag to properly determine
whether the local sched group is SMT. Set the flag in the local
child sched group of the new parent sched domain.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Link: https://lkml.kernel.org/r/73cf0959eafa53c02e7ef6bf805d751d9190e55d.1683156492.git.tim.c.chen@linux.intel.com
|
|
Current 500ms min window size for psi triggers limits polling interval
to 50ms to prevent polling threads from using too much cpu bandwidth by
polling too frequently. However the number of cgroups with triggers is
unlimited, so this protection can be defeated by creating multiple
cgroups with psi triggers (triggers in each cgroup are served by a single
"psimon" kernel thread).
Instead of limiting min polling period, which also limits the latency of
psi events, it's better to limit psi trigger creation to authorized users
only, like we do for system-wide psi triggers (/proc/pressure/* files can
be written only by processes with CAP_SYS_RESOURCE capability). This also
makes access rules for cgroup psi files consistent with system-wide ones.
Add a CAP_SYS_RESOURCE capability check for cgroup psi file writers and
remove the psi window min size limitation.
Suggested-by: Sudarshan Rajagopalan <quic_sudaraja@quicinc.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/all/cover.1676067791.git.quic_sudaraja@quicinc.com/
|
|
Do not assume that all the children of a scheduling domain have a given
flag. Check whether it has the SDF_SHARED_CHILD meta flag.
Suggested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230406203148.19182-9-ricardo.neri-calderon@linux.intel.com
|
|
Now that find_busiest_group() triggers load balancing between a fully_
busy SMT2 core and an idle non-SMT core, it is no longer needed to force
balancing via asym_packing. Use asym_packing only as intended: when there
is high-priority CPU that is idle.
After this change, the same logic apply to SMT and non-SMT local groups.
It makes less sense having a separate function to deal specifically with
SMT. Fold the logic in asym_smt_can_pull_tasks() into sched_asym().
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20230406203148.19182-8-ricardo.neri-calderon@linux.intel.com
|
|
The prefer_sibling setting acts on the busiest group to move excess tasks
to the local group. This should be done as per request of the child of the
busiest group's sched domain, not the local group's.
Using the flags of the child domain of the local group works fortuitously
if both groups have child domains.
There are cases, however, in which the busiest group's sched domain has
child but the local group's does not. Consider, for instance a non-SMT
core (or an SMT core with only one online sibling) doing load balance with
an SMT core at the MC level. SD_PREFER_SIBLING of the busiest group's child
domain will not be honored. We are left with a fully busy SMT core and an
idle non-SMT core.
Suggested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20230406203148.19182-7-ricardo.neri-calderon@linux.intel.com
|
|
When comparing two fully_busy scheduling groups, keep the current busiest
group if it represents an SMT core. Tasks in such scheduling group share
CPU resources and need more help than tasks in a non-SMT fully_busy group.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20230406203148.19182-6-ricardo.neri-calderon@linux.intel.com
|
|
Using asym_packing priorities within an SMT core is straightforward. Just
follow the priorities that hardware indicates.
When balancing load from an SMT core, also consider the idle state of its
siblings. Priorities do not reflect that an SMT core divides its throughput
among all its busy siblings. They only makes sense when exactly one sibling
is busy.
Indicate that active balance is needed if the destination CPU has lower
priority than the source CPU but the latter has busy SMT siblings.
Make find_busiest_queue() not skip higher-priority SMT cores with more than
busy sibling.
Suggested-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20230406203148.19182-5-ricardo.neri-calderon@linux.intel.com
|
|
Callers of asym_smt_can_pull_tasks() check the idle state of the
destination CPU and its SMT siblings, if any. No extra checks are needed
in such function.
Since SMT cores divide capacity among its siblings, priorities only really
make sense if only one sibling is active. This is true for SMT2, SMT4,
SMT8, etc. Do not use asym_packing load balance for this case. Instead,
let find_busiest_group() handle imbalances.
When balancing non-SMT cores or at higher scheduling domains (e.g.,
between MC scheduling groups), continue using priorities.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Len Brown <len.brown@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20230406203148.19182-4-ricardo.neri-calderon@linux.intel.com
|
|
When balancing load between cores, all the SMT siblings of the destination
CPU, if any, must be idle. Otherwise, pulling new tasks degrades the
throughput of the busy SMT siblings. The overall throughput of the system
remains the same.
When balancing load within an SMT core this consideration is not relevant.
Follow the priorities that hardware indicates.
Suggested-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20230406203148.19182-3-ricardo.neri-calderon@linux.intel.com
|
|
asym_packing needs this function to determine whether an SMT core is a
suitable destination for load balancing.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20230406203148.19182-2-ricardo.neri-calderon@linux.intel.com
|
