| Age | Commit message (Collapse) | Author |
|---|
|
Only if perf_event::pending_sigtrap is zero, the irq_work accounted by
increminging perf_event::nr_pending. The member perf_event::pending_addr
might be overwritten by a subsequent event if the signal was not yet
delivered and is expected. The irq_work will not be enqeueued again
because it has a check to be only enqueued once.
Move irq_work_queue() to where the counter is incremented and
perf_event::pending_sigtrap is set to make it more obvious that the
irq_work is scheduled once.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marco Elver <elver@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20240704170424.1466941-2-bigeasy@linutronix.de
|
|
The perf pending task work is never waited upon the matching event
release. In the case of a child event, released via free_event()
directly, this can potentially result in a leaked event, such as in the
following scenario that doesn't even require a weak IRQ work
implementation to trigger:
schedule()
prepare_task_switch()
=======> <NMI>
perf_event_overflow()
event->pending_sigtrap = ...
irq_work_queue(&event->pending_irq)
<======= </NMI>
perf_event_task_sched_out()
event_sched_out()
event->pending_sigtrap = 0;
atomic_long_inc_not_zero(&event->refcount)
task_work_add(&event->pending_task)
finish_lock_switch()
=======> <IRQ>
perf_pending_irq()
//do nothing, rely on pending task work
<======= </IRQ>
begin_new_exec()
perf_event_exit_task()
perf_event_exit_event()
// If is child event
free_event()
WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1)
// event is leaked
Similar scenarios can also happen with perf_event_remove_on_exec() or
simply against concurrent perf_event_release().
Fix this with synchonizing against the possibly remaining pending task
work while freeing the event, just like is done with remaining pending
IRQ work. This means that the pending task callback neither need nor
should hold a reference to the event, preventing it from ever beeing
freed.
Fixes: 517e6a301f34 ("perf: Fix perf_pending_task() UaF")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240621091601.18227-5-frederic@kernel.org
|
|
When a task is scheduled out, pending sigtrap deliveries are deferred
to the target task upon resume to userspace via task_work.
However failures while adding an event's callback to the task_work
engine are ignored. And since the last call for events exit happen
after task work is eventually closed, there is a small window during
which pending sigtrap can be queued though ignored, leaking the event
refcount addition such as in the following scenario:
TASK A
-----
do_exit()
exit_task_work(tsk);
<IRQ>
perf_event_overflow()
event->pending_sigtrap = pending_id;
irq_work_queue(&event->pending_irq);
</IRQ>
=========> PREEMPTION: TASK A -> TASK B
event_sched_out()
event->pending_sigtrap = 0;
atomic_long_inc_not_zero(&event->refcount)
// FAILS: task work has exited
task_work_add(&event->pending_task)
[...]
<IRQ WORK>
perf_pending_irq()
// early return: event->oncpu = -1
</IRQ WORK>
[...]
=========> TASK B -> TASK A
perf_event_exit_task(tsk)
perf_event_exit_event()
free_event()
WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1)
// leak event due to unexpected refcount == 2
As a result the event is never released while the task exits.
Fix this with appropriate task_work_add()'s error handling.
Fixes: 517e6a301f34 ("perf: Fix perf_pending_task() UaF")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240621091601.18227-4-frederic@kernel.org
|
|
Re-introduce task_work_cancel(), this time to cancel an actual callback
and not *any* callback pointing to a given function. This is going to be
needed for perf events event freeing.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240621091601.18227-3-frederic@kernel.org
|
|
A proper task_work_cancel() API that actually cancels a callback and not
*any* callback pointing to a given function is going to be needed for
perf events event freeing. Do the appropriate rename to prepare for
that.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240621091601.18227-2-frederic@kernel.org
|
|
inlined callers
Apparently despite it being marked inline, the compiler
may not inline __down_write_common() which makes it difficult
to identify the cause of lock contention, as the wchan of the
blocked function will always be listed as __down_write_common().
So add __always_inline annotation to the common function (as
well as the inlined helper callers) to force it to be inlined
so a more useful blocking function will be listed (via wchan).
This mirrors commit 92cc5d00a431 ("locking/rwsem: Add
__always_inline annotation to __down_read_common() and inlined
callers") which did the same for __down_read_common.
I sort of worry that I'm playing wack-a-mole here, and talking
with compiler people, they tell me inline means nothing, which
makes me want to cry a little. So I'm wondering if we need to
replace all the inlines with __always_inline, or remove them
because either we mean something by it, or not.
Fixes: c995e638ccbb ("locking/rwsem: Fold __down_{read,write}*()")
Reported-by: Tim Murray <timmurray@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lkml.kernel.org/r/20240709060831.495366-1-jstultz@google.com
|
|
The test thread will start N benchmark kthreads and then schedule out
until the test time finished and notify the benchmark kthreads to stop.
The benchmark kthreads will keep running until notified to stop.
There's a problem with current implementation when the benchmark
kthreads number is equal to the CPUs on a non-preemptible kernel:
since the scheduler will balance the kthreads across the CPUs and
when the test time's out the test thread won't get a chance to be
scheduled on any CPU then cannot notify the benchmark kthreads to stop.
This can be easily reproduced on a VM (simulated with 16 CPUs) with
PREEMPT_VOLUNTARY:
estuary:/mnt$ ./dma_map_benchmark -t 16 -s 1
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 10-...!: (5221 ticks this GP) idle=ed24/1/0x4000000000000000 softirq=142/142 fqs=0
rcu: (t=5254 jiffies g=-559 q=45 ncpus=16)
rcu: rcu_sched kthread starved for 5255 jiffies! g-559 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=12
rcu: Unless rcu_sched kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_sched state:R running task stack:0 pid:16 tgid:16 ppid:2 flags:0x00000008
Call trace
__switch_to+0xec/0x138
__schedule+0x2f8/0x1080
schedule+0x30/0x130
schedule_timeout+0xa0/0x188
rcu_gp_fqs_loop+0x128/0x528
rcu_gp_kthread+0x1c8/0x208
kthread+0xec/0xf8
ret_from_fork+0x10/0x20
Sending NMI from CPU 10 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 332 Comm: dma-map-benchma Not tainted 6.10.0-rc1-vanilla-LSE #8
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : arm_smmu_cmdq_issue_cmdlist+0x218/0x730
lr : arm_smmu_cmdq_issue_cmdlist+0x488/0x730
sp : ffff80008748b630
x29: ffff80008748b630 x28: 0000000000000000 x27: ffff80008748b780
x26: 0000000000000000 x25: 000000000000bc70 x24: 000000000001bc70
x23: ffff0000c12af080 x22: 0000000000010000 x21: 000000000000ffff
x20: ffff80008748b700 x19: ffff0000c12af0c0 x18: 0000000000010000
x17: 0000000000000001 x16: 0000000000000040 x15: ffffffffffffffff
x14: 0001ffffffffffff x13: 000000000000ffff x12: 00000000000002f1
x11: 000000000001ffff x10: 0000000000000031 x9 : ffff800080b6b0b8
x8 : ffff0000c2a48000 x7 : 000000000001bc71 x6 : 0001800000000000
x5 : 00000000000002f1 x4 : 01ffffffffffffff x3 : 000000000009aaf1
x2 : 0000000000000018 x1 : 000000000000000f x0 : ffff0000c12af18c
Call trace:
arm_smmu_cmdq_issue_cmdlist+0x218/0x730
__arm_smmu_tlb_inv_range+0xe0/0x1a8
arm_smmu_iotlb_sync+0xc0/0x128
__iommu_dma_unmap+0x248/0x320
iommu_dma_unmap_page+0x5c/0xe8
dma_unmap_page_attrs+0x38/0x1d0
map_benchmark_thread+0x118/0x2c0
kthread+0xec/0xf8
ret_from_fork+0x10/0x20
Solve this by adding scheduling point in the kthread loop,
so if there're other threads in the system they may have
a chance to run, especially the thread to notify the test
end. However this may degrade the test concurrency so it's
recommended to run this on an idle system.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Barry Song <baohua@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
I realized this while having a map containing both a struct bpf_timer and
a struct bpf_wq: the third argument provided to the bpf_wq callback is
not the struct bpf_wq pointer itself, but the pointer to the value in
the map.
Which means that the users need to double cast the provided "value" as
this is not a struct bpf_wq *.
This is a change of API, but there doesn't seem to be much users of bpf_wq
right now, so we should be able to go with this right now.
Fixes: 81f1d7a583fa ("bpf: wq: add bpf_wq_set_callback_impl")
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240708-fix-wq-v2-1-667e5c9fbd99@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
After commit 0ede61d8589c ("file: convert to SLAB_TYPESAFE_BY_RCU") this
loop always iterates exactly one time. Delete the for statement and pull
the code in a tab.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/ZoWJF51D4zWb6f5t@stanley.mountain
|
|
Currently, kprobe event checks whether the target symbol name is unique
or not, so that it does not put a probe on an unexpected place. But this
skips the check if the target is on a module because the module may not
be loaded.
To fix this issue, this patch checks the number of probe target symbols
in a target module when the module is loaded. If the probe is not on the
unique name symbols in the module, it will be rejected at that point.
Note that the symbol which has a unique name in the target module,
it will be accepted even if there are same-name symbols in the
kernel or other modules,
Link: https://lore.kernel.org/all/172016348553.99543.2834679315611882137.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Make it consistent with apply_wqattrs_commit().
Link: https://lore.kernel.org/lkml/20240203154334.791910-5-longman@redhat.com/
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The PWQ allocation and WQ enlistment are not within the same lock-held
critical section; therefore, their states can become out of sync when
the user modifies the unbound mask or if CPU hotplug events occur in
the interim since those operations only update the WQs that are already
in the list.
Make the PWQ allocation and WQ enlistment atomic.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
kthread_flush_worker() can't be called with wq_pool_mutex held.
Prepare for moving wq_pool_mutex and cpu hotplug lock out of
alloc_and_link_pwqs().
Cc: Zqiang <qiang.zhang1211@gmail.com>
Link: https://lore.kernel.org/lkml/20230920060704.24981-1-qiang.zhang1211@gmail.com/
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
new wq
For early wq allocation, rescuer initialization is the last step of the
creation of a new wq. Make the behavior the same for all allocations.
Prepare for initializing rescuer's affinities with the default pwq's
affinities.
Prepare for moving the whole workqueue initializing procedure into
wq_pool_mutex and cpu hotplug locks.
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
workqueue creation includes adding it to the workqueue list.
Prepare for moving the whole workqueue initializing procedure into
wq_pool_mutex and cpu hotplug locks.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
In the function cgroup_base_stat_cputime_show, there are five
instances of #ifdef, which makes the code not concise.
To address this, add the function cgroup_force_idle_show
to make the code more succinct.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Nowadays PF_KTHREAD is sticky and it was never protected by ->alloc_lock.
Move the PF_KTHREAD check outside of task_lock() section to make this code
more understandable.
Link: https://lkml.kernel.org/r/20240626191017.GA20031@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mm_update_next_owner() checks the children / real_parent->children to
avoid the "everything else" loop in the likely case, but this won't work
if a child/sibling has a zombie leader with ->mm == NULL.
Move the for_each_thread() logic into try_to_set_owner(), if nothing else
this makes the children/siblings/everything searches more consistent.
Link: https://lkml.kernel.org/r/20240626152930.GA17936@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jinliang Zheng <alexjlzheng@tencent.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Tycho Andersen <tandersen@netflix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add the new helper, try_to_set_owner(), which tries to update mm->owner
once we see c->mm == mm. This way mm_update_next_owner() doesn't need to
restart the list_for_each_entry/for_each_process loops from the very
beginning if it races with exit/exec, it can just continue.
Unlike the current code, try_to_set_owner() re-checks tsk->mm == mm before
it drops tasklist_lock, so it doesn't need get/put_task_struct().
Link: https://lkml.kernel.org/r/20240626152924.GA17933@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jinliang Zheng <alexjlzheng@tencent.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Tycho Andersen <tandersen@netflix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/phy/aquantia/aquantia.h
219343755eae ("net: phy: aquantia: add missing include guards")
61578f679378 ("net: phy: aquantia: add support for PHY LEDs")
drivers/net/ethernet/wangxun/libwx/wx_hw.c
bd07a9817846 ("net: txgbe: remove separate irq request for MSI and INTx")
b501d261a5b3 ("net: txgbe: add FDIR ATR support")
https://lore.kernel.org/all/20240703112936.483c1975@canb.auug.org.au/
include/linux/mlx5/mlx5_ifc.h
048a403648fc ("net/mlx5: IFC updates for changing max EQs")
99be56171fa9 ("net/mlx5e: SHAMPO, Re-enable HW-GRO")
https://lore.kernel.org/all/20240701133951.6926b2e3@canb.auug.org.au/
Adjacent changes:
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
4130c67cd123 ("wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference")
3f3126515fbe ("wifi: iwlwifi: mvm: add mvm-specific guard")
include/net/mac80211.h
816c6bec09ed ("wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP")
5a009b42e041 ("wifi: mac80211: track changes in AP's TPE")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'nocb.2024.06.03a', 'rcu-tasks.2024.06.06a', 'rcutorture.2024.06.06a' and 'srcu.2024.06.18a' into HEAD
doc.2024.06.06a: Documentation updates.
fixes.2024.07.04a: Miscellaneous fixes.
mb.2024.06.28a: Grace-period memory-barrier redundancy removal.
nocb.2024.06.03a: No-CB CPU updates.
rcu-tasks.2024.06.06a: RCU-Tasks updates.
rcutorture.2024.06.06a: Torture-test updates.
srcu.2024.06.18a: SRCU polled-grace-period updates.
|
|
When rcu_barrier() calls rcu_rdp_cpu_online() and observes a CPU off
rnp->qsmaskinitnext, it means that all accesses from the offline CPU
preceding the CPUHP_TEARDOWN_CPU are visible to RCU barrier, including
callbacks expiration and counter updates.
However interrupts can still fire after stop_machine() re-enables
interrupts and before rcutree_report_cpu_dead(). The related accesses
happening between CPUHP_TEARDOWN_CPU and rnp->qsmaskinitnext clearing
are _NOT_ guaranteed to be seen by rcu_barrier() without proper
ordering, especially when callbacks are invoked there to the end, making
rcutree_migrate_callback() bypass barrier_lock.
The following theoretical race example can make rcu_barrier() hang:
CPU 0 CPU 1
----- -----
//cpu_down()
smpboot_park_threads()
//ksoftirqd is parked now
<IRQ>
rcu_sched_clock_irq()
invoke_rcu_core()
do_softirq()
rcu_core()
rcu_do_batch()
// callback storm
// rcu_do_batch() returns
// before completing all
// of them
// do_softirq also returns early because of
// timeout. It defers to ksoftirqd but
// it's parked
</IRQ>
stop_machine()
take_cpu_down()
rcu_barrier()
spin_lock(barrier_lock)
// observes rcu_segcblist_n_cbs(&rdp->cblist) != 0
<IRQ>
do_softirq()
rcu_core()
rcu_do_batch()
//completes all pending callbacks
//smp_mb() implied _after_ callback number dec
</IRQ>
rcutree_report_cpu_dead()
rnp->qsmaskinitnext &= ~rdp->grpmask;
rcutree_migrate_callback()
// no callback, early return without locking
// barrier_lock
//observes !rcu_rdp_cpu_online(rdp)
rcu_barrier_entrain()
rcu_segcblist_entrain()
// Observe rcu_segcblist_n_cbs(rsclp) == 0
// because no barrier between reading
// rnp->qsmaskinitnext and rsclp->len
rcu_segcblist_add_len()
smp_mb__before_atomic()
// will now observe the 0 count and empty
// list, but too late, we enqueue regardless
WRITE_ONCE(rsclp->len, rsclp->len + v);
// ignored barrier callback
// rcu barrier stall...
This could be solved with a read memory barrier, enforcing the message
passing between rnp->qsmaskinitnext and rsclp->len, matching the full
memory barrier after rsclp->len addition in rcu_segcblist_add_len()
performed at the end of rcu_do_batch().
However the rcu_barrier() is complicated enough and probably doesn't
need too many more subtleties. CPU down is a slowpath and the
barrier_lock seldom contended. Solve the issue with unconditionally
locking the barrier_lock on rcutree_migrate_callbacks(). This makes sure
that either rcu_barrier() sees the empty queue or its entrained
callback will be migrated.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The rcu_sync structure's ->gp_count field is always accessed under the
protection of that same structure's ->rss_lock field, with the exception
of a pair of WARN_ON_ONCE() calls just prior to acquiring that lock in
functions rcu_sync_exit() and rcu_sync_dtor(). These lockless accesses
are unnecessary and impair KCSAN's ability to catch bugs that might be
inserted via other lockless accesses.
This commit therefore moves those WARN_ON_ONCE() calls under the lock.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
If a CPU is running either a userspace application or a guest OS in
nohz_full mode, it is possible for a system call to occur just as an
RCU grace period is starting. If that CPU also has the scheduling-clock
tick enabled for any reason (such as a second runnable task), and if the
system was booted with rcutree.use_softirq=0, then RCU can add insult to
injury by awakening that CPU's rcuc kthread, resulting in yet another
task and yet more OS jitter due to switching to that task, running it,
and switching back.
In addition, in the common case where that system call is not of
excessively long duration, awakening the rcuc task is pointless.
This pointlessness is due to the fact that the CPU will enter an extended
quiescent state upon returning to the userspace application or guest OS.
In this case, the rcuc kthread cannot do anything that the main RCU
grace-period kthread cannot do on its behalf, at least if it is given
a few additional milliseconds (for example, given the time duration
specified by rcutree.jiffies_till_first_fqs, give or take scheduling
delays).
This commit therefore adds a rcutree.nohz_full_patience_delay kernel
boot parameter that specifies the grace period age (in milliseconds,
rounded to jiffies) before which RCU will refrain from awakening the
rcuc kthread. Preliminary experimentation suggests a value of 1000,
that is, one second. Increasing rcutree.nohz_full_patience_delay will
increase grace-period latency and in turn increase memory footprint,
so systems with constrained memory might choose a smaller value.
Systems with less-aggressive OS-jitter requirements might choose the
default value of zero, which keeps the traditional immediate-wakeup
behavior, thus avoiding increases in grace-period latency.
[ paulmck: Apply Leonardo Bras feedback. ]
Link: https://lore.kernel.org/all/20240328171949.743211-1-leobras@redhat.com/
Reported-by: Leonardo Bras <leobras@redhat.com>
Suggested-by: Leonardo Bras <leobras@redhat.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Leonardo Bras <leobras@redhat.com>
|
|
The Lunarlake patches rely on the new VFM stuff.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
rb_alloc_aux() should not be called with nr_pages <= 0. Make it more robust
and readable by returning an error immediately in that case.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240624201101.60186-8-adrian.hunter@intel.com
|
|
The default aux_watermark is half the AUX area buffer size. In general,
on a 64-bit architecture, the AUX area buffer size could be a bigger than
fits in a 32-bit type, but the calculation does not allow for that
possibility.
However the aux_watermark value is recorded in a u32, so should not be
more than U32_MAX either.
Fix by doing the calculation in a correctly sized type, and limiting the
result to U32_MAX.
Fixes: d68e6799a5c8 ("perf: Cap allocation order at aux_watermark")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240624201101.60186-7-adrian.hunter@intel.com
|
|
nr_pages is unsigned long but gets passed to rb_alloc_aux() as an int,
and is stored as an int.
Only power-of-2 values are accepted, so if nr_pages is a 64_bit value, it
will be passed to rb_alloc_aux() as zero.
That is not ideal because:
1. the value is incorrect
2. rb_alloc_aux() is at risk of misbehaving, although it manages to
return -ENOMEM in that case, it is a result of passing zero to get_order()
even though the get_order() result is documented to be undefined in that
case.
Fix by simply validating the maximum supported value in the first place.
Use -ENOMEM error code for consistency with the current error code that
is returned in that case.
Fixes: 45bfb2e50471 ("perf: Add AUX area to ring buffer for raw data streams")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240624201101.60186-6-adrian.hunter@intel.com
|
|
perf_buffer->aux_nr_pages uses a 32-bit type, so a cast is needed to
calculate a 64-bit size.
Fixes: 45bfb2e50471 ("perf: Add AUX area to ring buffer for raw data streams")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240624201101.60186-5-adrian.hunter@intel.com
|
|
tasks
When a task's weight is being changed, set_load_weight() is called with
@update_load set. As weight changes aren't trivial for the fair class,
set_load_weight() calls fair.c::reweight_task() for fair class tasks.
However, set_load_weight() first tests task_has_idle_policy() on entry and
skips calling reweight_task() for SCHED_IDLE tasks. This is buggy as
SCHED_IDLE tasks are just fair tasks with a very low weight and they would
incorrectly skip load, vlag and position updates.
Fix it by updating reweight_task() to take struct load_weight as idle weight
can't be expressed with prio and making set_load_weight() call
reweight_task() for SCHED_IDLE tasks too when @update_load is set.
Fixes: 9059393e4ec1 ("sched/fair: Use reweight_entity() for set_user_nice()")
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org # v4.15+
Link: http://lkml.kernel.org/r/20240624102331.GI31592@noisy.programming.kicks-ass.net
|
|
The current code loops over the psi_states only to call a helper which
then resolves back to the action needed for each state using a switch
statement. That is effectively creating a double indirection of a kind
which, given how all the states need to be explicitly listed and handled
anyway, we can simply remove. Both the for loop and the switch statement
that is.
The benefit is both in the code size and CPU time spent in this function.
YMMV but on my Steam Deck, while in a game, the patch makes the CPU usage
go from ~2.4% down to ~1.2%. Text size at the same time went from 0x323 to
0x2c1.
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/20240625135000.38652-1-tursulin@igalia.com
|
|
Let's add match_devname_and_update_preferred_console() for driver
subsystems to call during init when the console is ready, and it's
character device name is known. For now, we use it only for the serial
layer to allow console=DEVNAME:0.0 style hardware based addressing for
consoles.
The earlier attempt on doing this caused a regression with the kernel
command line console order as it added calling __add_preferred_console()
again later on during init. A better approach was suggested by Petr where
we add the deferred console to the console_cmdline[] and update it later
on when the console is ready.
Suggested-by: Petr Mladek <pmladek@suse.com>
Co-developed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240703100615.118762-2-tony.lindgren@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently users of the interrupt simulator don't have any way of being
notified about interrupts from the simulated domain being requested or
released. This causes a problem for one of the users - the GPIO
simulator - which is unable to lock the pins as interrupts.
Define a structure containing callbacks to be executed on various
irq_sim-related events (for now: irq request and release) and provide an
extended function for creating simulated interrupt domains that takes it
and a pointer to custom user data (to be passed to said callbacks) as
arguments.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240624093934.17089-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Patch series "kmsan: Enable on s390", v7.
Architectures use assembly code to initialize ftrace_regs and call
ftrace_ops_list_func(). Therefore, from the KMSAN's point of view,
ftrace_regs is poisoned on ftrace_ops_list_func entry(). This causes
KMSAN warnings when running the ftrace testsuite.
Fix by trusting the architecture-specific assembly code and always
unpoisoning ftrace_regs in ftrace_ops_list_func.
The issue was not encountered on x86_64 so far only by accident:
assembly-allocated ftrace_regs was overlapping a stale partially
unpoisoned stack frame. Poisoning stack frames before returns [1] makes
the issue appear on x86_64 as well.
[1] https://github.com/iii-i/llvm-project/commits/msan-poison-allocas-before-returning-2024-06-12/
Link: https://lkml.kernel.org/r/20240621113706.315500-1-iii@linux.ibm.com
Link: https://lkml.kernel.org/r/20240621113706.315500-2-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()", v2.
This patchset is preparatory work for mTHP swapin.
folio_add_new_anon_rmap() assumes that new anon rmaps are always
exclusive. However, this assumption doesn’t hold true for cases like
do_swap_page(), where a new anon might be added to the swapcache and is
not necessarily exclusive.
The patchset extends the rmap flags to allow folio_add_new_anon_rmap() to
handle both exclusive and non-exclusive new anon folios. The
do_swap_page() function is updated to use this extended API with rmap
flags. Consequently, all new anon folios now consistently use
folio_add_new_anon_rmap(). The special case for !folio_test_anon() in
__folio_add_anon_rmap() can be safely removed.
In conclusion, new anon folios always use folio_add_new_anon_rmap(),
regardless of exclusivity. Old anon folios continue to use
__folio_add_anon_rmap() via folio_add_anon_rmap_pmd() and
folio_add_anon_rmap_ptes().
This patch (of 3):
In the case of a swap-in, a new anonymous folio is not necessarily
exclusive. This patch updates the rmap flags to allow a new anonymous
folio to be treated as either exclusive or non-exclusive. To maintain the
existing behavior, we always use EXCLUSIVE as the default setting.
[akpm@linux-foundation.org: cleanup and constifications per David and akpm]
[v-songbaohua@oppo.com: fix missing doc for flags of folio_add_new_anon_rmap()]
Link: https://lkml.kernel.org/r/20240619210641.62542-1-21cnbao@gmail.com
[v-songbaohua@oppo.com: enhance doc for extend rmap flags arguments for folio_add_new_anon_rmap]
Link: https://lkml.kernel.org/r/20240622030256.43775-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240617231137.80726-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240617231137.80726-2-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Tested-by: Shuai Yuan <yuanshuai@oppo.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When mm_update_owner_next() is racing with swapoff (try_to_unuse()) or
/proc or ptrace or page migration (get_task_mm()), it is impossible to
find an appropriate task_struct in the loop whose mm_struct is the same as
the target mm_struct.
If the above race condition is combined with the stress-ng-zombie and
stress-ng-dup tests, such a long loop can easily cause a Hard Lockup in
write_lock_irq() for tasklist_lock.
Recognize this situation in advance and exit early.
Link: https://lkml.kernel.org/r/20240620122123.3877432-1-alexjlzheng@tencent.com
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tycho Andersen <tandersen@netflix.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
To streamline maintenance efforts, we propose removing the implementation
of swap_free(). Instead, we can simply invoke swap_free_nr() with nr set
to 1. swap_free_nr() is designed with a bitmap consisting of only one
long, resulting in overhead that can be ignored for cases where nr equals
1.
A prime candidate for leveraging swap_free_nr() lies within
kernel/power/swap.c. Implementing this change facilitates the adoption of
batch processing for hibernation.
Link: https://lkml.kernel.org/r/20240529082824.150954-3-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Suggested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Chris Li <chrisl@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chuanhua Han <hanchuanhua@oppo.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the WARN_ON_ONCE() triggers, the printk() of the additional
information related to the warning will not happen in print level
"warn". When reading dmesg with a restriction to level "warn", the
information published by the printk_once() will not show up there.
Transform WARN_ON_ONCE() and printk_once() into a WARN_ONCE().
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240610103552.25252-1-anna-maria@linutronix.de
|
|
When mm_update_owner_next() is racing with swapoff (try_to_unuse()) or
/proc or ptrace or page migration (get_task_mm()), it is impossible to
find an appropriate task_struct in the loop whose mm_struct is the same as
the target mm_struct.
If the above race condition is combined with the stress-ng-zombie and
stress-ng-dup tests, such a long loop can easily cause a Hard Lockup in
write_lock_irq() for tasklist_lock.
Recognize this situation in advance and exit early.
Link: https://lkml.kernel.org/r/20240620122123.3877432-1-alexjlzheng@tencent.com
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tycho Andersen <tandersen@netflix.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The writing of css->cgroup associated with the cgroup root in
rebind_subsystems() is currently protected only by cgroup_mutex.
However, the reading of css->cgroup in both proc_cpuset_show() and
proc_cgroup_show() is protected just by css_set_lock. That makes the
readers susceptible to racing problems like data tearing or caching.
It is also a problem that can be reported by KCSAN.
This can be fixed by using READ_ONCE() and WRITE_ONCE() to access
css->cgroup. Alternatively, the writing of css->cgroup can be moved
under css_set_lock as well which is done by this patch.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Introduce misc.peak to record the historical maximum usage of the
resource, as in some scenarios the value of misc.max could be
adjusted based on the peak usage of the resource.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Introduce CONFIG_SLAB_BUCKETS which provides the infrastructure to
support separated kmalloc buckets (in the following kmem_buckets_create()
patches and future codetag-based separation). Since this will provide
a mitigation for a very common case of exploits, it is recommended to
enable this feature for general purpose distros. By default, the new
Kconfig will be enabled if CONFIG_SLAB_FREELIST_HARDENED is enabled (and
it is added to the hardening.config Kconfig fragment).
To be able to choose which buckets to allocate from, make the buckets
available to the internal kmalloc interfaces by adding them as the
second argument, rather than depending on the buckets being chosen from
the fixed set of global buckets. Where the bucket is not available,
pass NULL, which means "use the default system kmalloc bucket set"
(the prior existing behavior), as implemented in kmalloc_slab().
To avoid adding the extra argument when !CONFIG_SLAB_BUCKETS, only the
top-level macros and static inlines use the buckets argument (where
they are stripped out and compiled out respectively). The actual extern
functions can then be built without the argument, and the internals
fall back to the global kmalloc buckets unconditionally.
Co-developed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Use a simple if-statement to replace the cumbersome goto-statement in
workqueue_set_unbound_cpumask().
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Make workqueue_unbound_exclude_cpumask() and workqueue_set_unbound_cpumask()
only update wq_isolated_cpumask and wq_requested_unbound_cpumask when
workqueue_apply_unbound_cpumask() returns successfully.
Fixes: fe28f631fa94("workqueue: Add workqueue_unbound_exclude_cpumask() to exclude CPUs from wq_unbound_cpumask")
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Use the .map_allock_check callback to perform allocation checks before
allocating memory for the devmap.
Signed-off-by: Florian Lehner <dev@der-flo.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240615101158.57889-1-dev@der-flo.net
|
|
Zero-extending results of atomic probe operations fails with:
verifier bug. zext_dst is set, but no reg is defined
The problem is that insn_def_regno() handles BPF_ATOMICs, but not
BPF_PROBE_ATOMICs. Fix by adding the missing condition.
Fixes: d503a04f8bc0 ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-2-iii@linux.ibm.com
|
|
Let's use sysfs_emit() instead of snprintf().
Suggested-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/r/20240625151123.2750-4-laoar.shao@gmail.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
There are situations when it might make sense to combine livepatches
with and without the atomic replace on the same system. For example,
the livepatch without the atomic replace might provide a hotfix
or extra tuning.
Managing livepatches on such systems might be challenging. And the
information which of the installed livepatches do not use the atomic
replace would be useful.
Add new sysfs interface 'replace'. It works as follows:
$ cat /sys/kernel/livepatch/livepatch-non_replace/replace
0
$ cat /sys/kernel/livepatch/livepatch-replace/replace
1
[ commit log improved by Petr ]
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/r/20240625151123.2750-2-laoar.shao@gmail.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
The bpf_net_ctx_get_.*_flush_list() are used at the top of the function.
This means the variable is always assigned even if unused. By moving the
function to where it is used, it is possible to delay the initialisation
until it is unavoidable.
Not sure how much this gains in reality but by looking at bq_enqueue()
(in devmap.c) gcc pushes one register less to the stack. \o/.
Move flush list retrieval to where it is used.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Every NIC driver utilizing XDP should invoke xdp_do_flush() after
processing all packages. With the introduction of the bpf_net_context
logic the flush lists (for dev, CPU-map and xsk) are lazy initialized
only if used. However xdp_do_flush() tries to flush all three of them so
all three lists are always initialized and the likely empty lists are
"iterated".
Without the usage of XDP but with CONFIG_DEBUG_NET the lists are also
initialized due to xdp_do_check_flushed().
Jakub suggest to utilize the hints in bpf_net_context and avoid invoking
the flush function. This will also avoiding initializing the lists which
are otherwise unused.
Introduce bpf_net_ctx_get_all_used_flush_lists() to return the
individual list if not-empty. Use the logic in xdp_do_flush() and
xdp_do_check_flushed(). Remove the not needed .*_check_flush().
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
