| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit e8742081db7d01f980c6161ae1e8a1dbc1e30979 ]
syzbot reported uninit memory usages during map_{lookup,delete}_elem.
==========
BUG: KMSAN: uninit-value in __dev_map_lookup_elem kernel/bpf/devmap.c:441 [inline]
BUG: KMSAN: uninit-value in dev_map_lookup_elem+0xf3/0x170 kernel/bpf/devmap.c:796
__dev_map_lookup_elem kernel/bpf/devmap.c:441 [inline]
dev_map_lookup_elem+0xf3/0x170 kernel/bpf/devmap.c:796
____bpf_map_lookup_elem kernel/bpf/helpers.c:42 [inline]
bpf_map_lookup_elem+0x5c/0x80 kernel/bpf/helpers.c:38
___bpf_prog_run+0x13fe/0xe0f0 kernel/bpf/core.c:1997
__bpf_prog_run256+0xb5/0xe0 kernel/bpf/core.c:2237
==========
The reproducer should be in the interpreter mode.
The C reproducer is trying to run the following bpf prog:
0: (18) r0 = 0x0
2: (18) r1 = map[id:49]
4: (b7) r8 = 16777216
5: (7b) *(u64 *)(r10 -8) = r8
6: (bf) r2 = r10
7: (07) r2 += -229
^^^^^^^^^^
8: (b7) r3 = 8
9: (b7) r4 = 0
10: (85) call dev_map_lookup_elem#1543472
11: (95) exit
It is due to the "void *key" (r2) passed to the helper. bpf allows uninit
stack memory access for bpf prog with the right privileges. This patch
uses kmsan_unpoison_memory() to mark the stack as initialized.
This should address different syzbot reports on the uninit "void *key"
argument during map_{lookup,delete}_elem.
Reported-by: syzbot+603bcd9b0bf1d94dbb9b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/000000000000f9ce6d061494e694@google.com/
Reported-by: syzbot+eb02dc7f03dce0ef39f3@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/000000000000a5c69c06147c2238@google.com/
Reported-by: syzbot+b4e65ca24fd4d0c734c3@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/000000000000ac56fb06143b6cfa@google.com/
Reported-by: syzbot+d2b113dc9fea5e1d2848@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/0000000000000d69b206142d1ff7@google.com/
Reported-by: syzbot+1a3cf6f08d68868f9db3@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/0000000000006f876b061478e878@google.com/
Tested-by: syzbot+1a3cf6f08d68868f9db3@syzkaller.appspotmail.com
Suggested-by: Yonghong Song <yonghong.song@linux.dev>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240328185801.1843078-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7d2cc63eca0c993c99d18893214abf8f85d566d8 ]
set_memory_ro() can fail, leaving memory unprotected.
Check its return and take it into account as an error.
Link: https://github.com/KSPP/linux/issues/7
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linux-hardening@vger.kernel.org <linux-hardening@vger.kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Message-ID: <286def78955e04382b227cb3e4b6ba272a7442e3.1709850515.git.christophe.leroy@csgroup.eu>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cfa1a2329a691ffd991fcf7248a57d752e712881 ]
The BPF ring buffer internally is implemented as a power-of-2 sized circular
buffer, with two logical and ever-increasing counters: consumer_pos is the
consumer counter to show which logical position the consumer consumed the
data, and producer_pos which is the producer counter denoting the amount of
data reserved by all producers.
Each time a record is reserved, the producer that "owns" the record will
successfully advance producer counter. In user space each time a record is
read, the consumer of the data advanced the consumer counter once it finished
processing. Both counters are stored in separate pages so that from user
space, the producer counter is read-only and the consumer counter is read-write.
One aspect that simplifies and thus speeds up the implementation of both
producers and consumers is how the data area is mapped twice contiguously
back-to-back in the virtual memory, allowing to not take any special measures
for samples that have to wrap around at the end of the circular buffer data
area, because the next page after the last data page would be first data page
again, and thus the sample will still appear completely contiguous in virtual
memory.
Each record has a struct bpf_ringbuf_hdr { u32 len; u32 pg_off; } header for
book-keeping the length and offset, and is inaccessible to the BPF program.
Helpers like bpf_ringbuf_reserve() return `(void *)hdr + BPF_RINGBUF_HDR_SZ`
for the BPF program to use. Bing-Jhong and Muhammad reported that it is however
possible to make a second allocated memory chunk overlapping with the first
chunk and as a result, the BPF program is now able to edit first chunk's
header.
For example, consider the creation of a BPF_MAP_TYPE_RINGBUF map with size
of 0x4000. Next, the consumer_pos is modified to 0x3000 /before/ a call to
bpf_ringbuf_reserve() is made. This will allocate a chunk A, which is in
[0x0,0x3008], and the BPF program is able to edit [0x8,0x3008]. Now, lets
allocate a chunk B with size 0x3000. This will succeed because consumer_pos
was edited ahead of time to pass the `new_prod_pos - cons_pos > rb->mask`
check. Chunk B will be in range [0x3008,0x6010], and the BPF program is able
to edit [0x3010,0x6010]. Due to the ring buffer memory layout mentioned
earlier, the ranges [0x0,0x4000] and [0x4000,0x8000] point to the same data
pages. This means that chunk B at [0x4000,0x4008] is chunk A's header.
bpf_ringbuf_submit() / bpf_ringbuf_discard() use the header's pg_off to then
locate the bpf_ringbuf itself via bpf_ringbuf_restore_from_rec(). Once chunk
B modified chunk A's header, then bpf_ringbuf_commit() refers to the wrong
page and could cause a crash.
Fix it by calculating the oldest pending_pos and check whether the range
from the oldest outstanding record to the newest would span beyond the ring
buffer size. If that is the case, then reject the request. We've tested with
the ring buffer benchmark in BPF selftests (./benchs/run_bench_ringbufs.sh)
before/after the fix and while it seems a bit slower on some benchmarks, it
is still not significantly enough to matter.
Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it")
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Reported-by: Muhammad Ramdhan <ramdhan@starlabs.sg>
Co-developed-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Co-developed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240621140828.18238-1-daniel@iogearbox.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 44b7f7151dfc2e0947f39ed4b9bc4b0c2ccd46fc ]
In coerce_subreg_to_size_sx(), for the case where upper
sign extension bits are the same for smax32 and smin32
values, we missed to setup properly. This is especially
problematic if both smax32 and smin32's sign extension
bits are 1.
The following is a simple example illustrating the inconsistent
verifier states due to missed var_off:
0: (85) call bpf_get_prandom_u32#7 ; R0_w=scalar()
1: (bf) r3 = r0 ; R0_w=scalar(id=1) R3_w=scalar(id=1)
2: (57) r3 &= 15 ; R3_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=15,var_off=(0x0; 0xf))
3: (47) r3 |= 128 ; R3_w=scalar(smin=umin=smin32=umin32=128,smax=umax=smax32=umax32=143,var_off=(0x80; 0xf))
4: (bc) w7 = (s8)w3
REG INVARIANTS VIOLATION (alu): range bounds violation u64=[0xffffff80, 0x8f] s64=[0xffffff80, 0x8f]
u32=[0xffffff80, 0x8f] s32=[0x80, 0xffffff8f] var_off=(0x80, 0xf)
The var_off=(0x80, 0xf) is not correct, and the correct one should
be var_off=(0xffffff80; 0xf) since from insn 3, we know that at
insn 4, the sign extension bits will be 1. This patch fixed this
issue by setting var_off properly.
Fixes: 8100928c8814 ("bpf: Support new sign-extension mov insns")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240615174632.3995278-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 380d5f89a4815ff88461a45de2fb6f28533df708 ]
Zac reported a verification failure and Alexei reproduced the issue
with a simple reproducer ([1]). The verification failure is due to missed
setting for var_off.
The following is the reproducer in [1]:
0: R1=ctx() R10=fp0
0: (71) r3 = *(u8 *)(r10 -387) ;
R3_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) R10=fp0
1: (bc) w7 = (s8)w3 ;
R3_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
R7_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=127,var_off=(0x0; 0x7f))
2: (36) if w7 >= 0x2533823b goto pc-3
mark_precise: frame0: last_idx 2 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r7 stack= before 1: (bc) w7 = (s8)w3
mark_precise: frame0: regs=r3 stack= before 0: (71) r3 = *(u8 *)(r10 -387)
2: R7_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=127,var_off=(0x0; 0x7f))
3: (b4) w0 = 0 ; R0_w=0
4: (95) exit
Note that after insn 1, the var_off for R7 is (0x0; 0x7f). This is not correct
since upper 24 bits of w7 could be 0 or 1. So correct var_off should be
(0x0; 0xffffffff). Missing var_off setting in set_sext32_default_val() caused later
incorrect analysis in zext_32_to_64(dst_reg) and reg_bounds_sync(dst_reg).
To fix the issue, set var_off correctly in set_sext32_default_val(). The correct
reg state after insn 1 becomes:
1: (bc) w7 = (s8)w3 ;
R3_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
R7_w=scalar(smin=0,smax=umax=0xffffffff,smin32=-128,smax32=127,var_off=(0x0; 0xffffffff))
and at insn 2, the verifier correctly determines either branch is possible.
[1] https://lore.kernel.org/bpf/CAADnVQLPU0Shz7dWV4bn2BgtGdxN3uFHPeobGBA72tpg5Xoykw@mail.gmail.com/
Fixes: 8100928c8814 ("bpf: Support new sign-extension mov insns")
Reported-by: Zac Ecob <zacecob@protonmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240615174626.3994813-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 4b377b4868ef17b040065bd468668c707d2477a5 upstream.
Commit 1a7d0890dd4a ("kprobe/ftrace: bail out if ftrace was killed")
introduced a bad K&R function definition, which we haven't accepted in a
long long time.
Gcc seems to let it slide, but clang notices with the appropriate error:
kernel/kprobes.c:1140:24: error: a function declaration without a prototype is deprecated in all >
1140 | void kprobe_ftrace_kill()
| ^
| void
but this commit was apparently never in linux-next before it was sent
upstream, so it didn't get the appropriate build test coverage.
Fixes: 1a7d0890dd4a kprobe/ftrace: bail out if ftrace was killed
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 23748e3e0fbfe471eff5ce439921629f6a427828 ]
Fix the 'make W=1' warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in kernel/trace/preemptirq_delay_test.o
Link: https://lore.kernel.org/linux-trace-kernel/20240518-md-preemptirq_delay_test-v1-1-387d11b30d85@quicinc.com
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: f96e8577da10 ("lib: Add module for testing preemptoff/irqsoff latency tracers")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 01c8f9806bde438ca1c8cbbc439f0a14a6694f6c upstream.
In kcov_remote_start()/kcov_remote_stop(), we swap the previous KCOV
metadata of the current task into a per-CPU variable. However, the
kcov_mode_enabled(mode) check is not sufficient in the case of remote KCOV
coverage: current->kcov_mode always remains KCOV_MODE_DISABLED for remote
KCOV objects.
If the original task that has invoked the KCOV_REMOTE_ENABLE ioctl happens
to get interrupted and kcov_remote_start() is called, it ultimately leads
to kcov_remote_stop() NOT restoring the original KCOV reference. So when
the task exits, all registered remote KCOV handles remain active forever.
The most uncomfortable effect (at least for syzkaller) is that the bug
prevents the reuse of the same /sys/kernel/debug/kcov descriptor. If
we obtain it in the parent process and then e.g. drop some
capabilities and continuously fork to execute individual programs, at
some point current->kcov of the forked process is lost,
kcov_task_exit() takes no action, and all KCOV_REMOTE_ENABLE ioctls
calls from subsequent forks fail.
And, yes, the efficiency is also affected if we keep on losing remote
kcov objects.
a) kcov_remote_map keeps on growing forever.
b) (If I'm not mistaken), we're also not freeing the memory referenced
by kcov->area.
Fix it by introducing a special kcov_mode that is assigned to the task
that owns a KCOV remote object. It makes kcov_mode_enabled() return true
and yet does not trigger coverage collection in __sanitizer_cov_trace_pc()
and write_comp_data().
[nogikh@google.com: replace WRITE_ONCE() with an ordinary assignment]
Link: https://lkml.kernel.org/r/20240614171221.2837584-1-nogikh@google.com
Link: https://lkml.kernel.org/r/20240611133229.527822-1-nogikh@google.com
Fixes: 5ff3b30ab57d ("kcov: collect coverage from interrupts")
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Marco Elver <elver@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c1558bc57b8e5b4da5d821537cd30e2e660861d8 upstream.
Using gcov on kernels compiled with GCC 14 results in truncated 16-byte
long .gcda files with no usable data. To fix this, update GCOV_COUNTERS
to match the value defined by GCC 14.
Tested with GCC versions 14.1.0 and 13.2.0.
Link: https://lkml.kernel.org/r/20240610092743.1609845-1-oberpar@linux.ibm.com
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reported-by: Allison Henderson <allison.henderson@oracle.com>
Reported-by: Chuck Lever III <chuck.lever@oracle.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3572bd5689b0812b161b40279e39ca5b66d73e88 ]
The kprobes and synth event generation test modules add events and lock
(get a reference) those event file reference in module init function,
and unlock and delete it in module exit function. This is because those
are designed for playing as modules.
If we make those modules as built-in, those events are left locked in the
kernel, and never be removed. This causes kprobe event self-test failure
as below.
[ 97.349708] ------------[ cut here ]------------
[ 97.353453] WARNING: CPU: 3 PID: 1 at kernel/trace/trace_kprobe.c:2133 kprobe_trace_self_tests_init+0x3f1/0x480
[ 97.357106] Modules linked in:
[ 97.358488] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 6.9.0-g699646734ab5-dirty #14
[ 97.361556] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[ 97.363880] RIP: 0010:kprobe_trace_self_tests_init+0x3f1/0x480
[ 97.365538] Code: a8 24 08 82 e9 ae fd ff ff 90 0f 0b 90 48 c7 c7 e5 aa 0b 82 e9 ee fc ff ff 90 0f 0b 90 48 c7 c7 2d 61 06 82 e9 8e fd ff ff 90 <0f> 0b 90 48 c7 c7 33 0b 0c 82 89 c6 e8 6e 03 1f ff 41 ff c7 e9 90
[ 97.370429] RSP: 0000:ffffc90000013b50 EFLAGS: 00010286
[ 97.371852] RAX: 00000000fffffff0 RBX: ffff888005919c00 RCX: 0000000000000000
[ 97.373829] RDX: ffff888003f40000 RSI: ffffffff8236a598 RDI: ffff888003f40a68
[ 97.375715] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
[ 97.377675] R10: ffffffff811c9ae5 R11: ffffffff8120c4e0 R12: 0000000000000000
[ 97.379591] R13: 0000000000000001 R14: 0000000000000015 R15: 0000000000000000
[ 97.381536] FS: 0000000000000000(0000) GS:ffff88807dcc0000(0000) knlGS:0000000000000000
[ 97.383813] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 97.385449] CR2: 0000000000000000 CR3: 0000000002244000 CR4: 00000000000006b0
[ 97.387347] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 97.389277] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 97.391196] Call Trace:
[ 97.391967] <TASK>
[ 97.392647] ? __warn+0xcc/0x180
[ 97.393640] ? kprobe_trace_self_tests_init+0x3f1/0x480
[ 97.395181] ? report_bug+0xbd/0x150
[ 97.396234] ? handle_bug+0x3e/0x60
[ 97.397311] ? exc_invalid_op+0x1a/0x50
[ 97.398434] ? asm_exc_invalid_op+0x1a/0x20
[ 97.399652] ? trace_kprobe_is_busy+0x20/0x20
[ 97.400904] ? tracing_reset_all_online_cpus+0x15/0x90
[ 97.402304] ? kprobe_trace_self_tests_init+0x3f1/0x480
[ 97.403773] ? init_kprobe_trace+0x50/0x50
[ 97.404972] do_one_initcall+0x112/0x240
[ 97.406113] do_initcall_level+0x95/0xb0
[ 97.407286] ? kernel_init+0x1a/0x1a0
[ 97.408401] do_initcalls+0x3f/0x70
[ 97.409452] kernel_init_freeable+0x16f/0x1e0
[ 97.410662] ? rest_init+0x1f0/0x1f0
[ 97.411738] kernel_init+0x1a/0x1a0
[ 97.412788] ret_from_fork+0x39/0x50
[ 97.413817] ? rest_init+0x1f0/0x1f0
[ 97.414844] ret_from_fork_asm+0x11/0x20
[ 97.416285] </TASK>
[ 97.417134] irq event stamp: 13437323
[ 97.418376] hardirqs last enabled at (13437337): [<ffffffff8110bc0c>] console_unlock+0x11c/0x150
[ 97.421285] hardirqs last disabled at (13437370): [<ffffffff8110bbf1>] console_unlock+0x101/0x150
[ 97.423838] softirqs last enabled at (13437366): [<ffffffff8108e17f>] handle_softirqs+0x23f/0x2a0
[ 97.426450] softirqs last disabled at (13437393): [<ffffffff8108e346>] __irq_exit_rcu+0x66/0xd0
[ 97.428850] ---[ end trace 0000000000000000 ]---
And also, since we can not cleanup dynamic_event file, ftracetest are
failed too.
To avoid these issues, build these tests only as modules.
Link: https://lore.kernel.org/all/171811263754.85078.5877446624311852525.stgit@devnote2/
Fixes: 9fe41efaca08 ("tracing: Add synth event generation test module")
Fixes: 64836248dda2 ("tracing: Add kprobe event command generation test module")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1a7d0890dd4a502a202aaec792a6c04e6e049547 ]
If an error happens in ftrace, ftrace_kill() will prevent disarming
kprobes. Eventually, the ftrace_ops associated with the kprobes will be
freed, yet the kprobes will still be active, and when triggered, they
will use the freed memory, likely resulting in a page fault and panic.
This behavior can be reproduced quite easily, by creating a kprobe and
then triggering a ftrace_kill(). For simplicity, we can simulate an
ftrace error with a kernel module like [1]:
[1]: https://github.com/brenns10/kernel_stuff/tree/master/ftrace_killer
sudo perf probe --add commit_creds
sudo perf trace -e probe:commit_creds
# In another terminal
make
sudo insmod ftrace_killer.ko # calls ftrace_kill(), simulating bug
# Back to perf terminal
# ctrl-c
sudo perf probe --del commit_creds
After a short period, a page fault and panic would occur as the kprobe
continues to execute and uses the freed ftrace_ops. While ftrace_kill()
is supposed to be used only in extreme circumstances, it is invoked in
FTRACE_WARN_ON() and so there are many places where an unexpected bug
could be triggered, yet the system may continue operating, possibly
without the administrator noticing. If ftrace_kill() does not panic the
system, then we should do everything we can to continue operating,
rather than leave a ticking time bomb.
Link: https://lore.kernel.org/all/20240501162956.229427-1-stephen.s.brennan@oracle.com/
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 668c0406d887467d53f8fe79261dda1d22d5b671 ]
When the torture_type is set srcu or srcud and cb_barrier is
non-zero, running the rcutorture test will trigger the
following warning:
[ 163.910989][ C1] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 163.910994][ C1] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
[ 163.910999][ C1] preempt_count: 10001, expected: 0
[ 163.911002][ C1] RCU nest depth: 0, expected: 0
[ 163.911005][ C1] INFO: lockdep is turned off.
[ 163.911007][ C1] irq event stamp: 30964
[ 163.911010][ C1] hardirqs last enabled at (30963): [<ffffffffabc7df52>] do_idle+0x362/0x500
[ 163.911018][ C1] hardirqs last disabled at (30964): [<ffffffffae616eff>] sysvec_call_function_single+0xf/0xd0
[ 163.911025][ C1] softirqs last enabled at (0): [<ffffffffabb6475f>] copy_process+0x16ff/0x6580
[ 163.911033][ C1] softirqs last disabled at (0): [<0000000000000000>] 0x0
[ 163.911038][ C1] Preemption disabled at:
[ 163.911039][ C1] [<ffffffffacf1964b>] stack_depot_save_flags+0x24b/0x6c0
[ 163.911063][ C1] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 6.8.0-rc4-rt4-yocto-preempt-rt+ #3 1e39aa9a737dd024a3275c4f835a872f673a7d3a
[ 163.911071][ C1] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[ 163.911075][ C1] Call Trace:
[ 163.911078][ C1] <IRQ>
[ 163.911080][ C1] dump_stack_lvl+0x88/0xd0
[ 163.911089][ C1] dump_stack+0x10/0x20
[ 163.911095][ C1] __might_resched+0x36f/0x530
[ 163.911105][ C1] rt_spin_lock+0x82/0x1c0
[ 163.911112][ C1] spin_lock_irqsave_ssp_contention+0xb8/0x100
[ 163.911121][ C1] srcu_gp_start_if_needed+0x782/0xf00
[ 163.911128][ C1] ? _raw_spin_unlock_irqrestore+0x46/0x70
[ 163.911136][ C1] ? debug_object_active_state+0x336/0x470
[ 163.911148][ C1] ? __pfx_srcu_gp_start_if_needed+0x10/0x10
[ 163.911156][ C1] ? __pfx_lock_release+0x10/0x10
[ 163.911165][ C1] ? __pfx_rcu_torture_barrier_cbf+0x10/0x10
[ 163.911188][ C1] __call_srcu+0x9f/0xe0
[ 163.911196][ C1] call_srcu+0x13/0x20
[ 163.911201][ C1] srcu_torture_call+0x1b/0x30
[ 163.911224][ C1] rcu_torture_barrier1cb+0x4a/0x60
[ 163.911247][ C1] __flush_smp_call_function_queue+0x267/0xca0
[ 163.911256][ C1] ? __pfx_rcu_torture_barrier1cb+0x10/0x10
[ 163.911281][ C1] generic_smp_call_function_single_interrupt+0x13/0x20
[ 163.911288][ C1] __sysvec_call_function_single+0x7d/0x280
[ 163.911295][ C1] sysvec_call_function_single+0x93/0xd0
[ 163.911302][ C1] </IRQ>
[ 163.911304][ C1] <TASK>
[ 163.911308][ C1] asm_sysvec_call_function_single+0x1b/0x20
[ 163.911313][ C1] RIP: 0010:default_idle+0x17/0x20
[ 163.911326][ C1] RSP: 0018:ffff888001997dc8 EFLAGS: 00000246
[ 163.911333][ C1] RAX: 0000000000000000 RBX: dffffc0000000000 RCX: ffffffffae618b51
[ 163.911337][ C1] RDX: 0000000000000000 RSI: ffffffffaea80920 RDI: ffffffffaec2de80
[ 163.911342][ C1] RBP: ffff888001997dc8 R08: 0000000000000001 R09: ffffed100d740cad
[ 163.911346][ C1] R10: ffffed100d740cac R11: ffff88806ba06563 R12: 0000000000000001
[ 163.911350][ C1] R13: ffffffffafe460c0 R14: ffffffffafe460c0 R15: 0000000000000000
[ 163.911358][ C1] ? ct_kernel_exit.constprop.3+0x121/0x160
[ 163.911369][ C1] ? lockdep_hardirqs_on+0xc4/0x150
[ 163.911376][ C1] arch_cpu_idle+0x9/0x10
[ 163.911383][ C1] default_idle_call+0x7a/0xb0
[ 163.911390][ C1] do_idle+0x362/0x500
[ 163.911398][ C1] ? __pfx_do_idle+0x10/0x10
[ 163.911404][ C1] ? complete_with_flags+0x8b/0xb0
[ 163.911416][ C1] cpu_startup_entry+0x58/0x70
[ 163.911423][ C1] start_secondary+0x221/0x280
[ 163.911430][ C1] ? __pfx_start_secondary+0x10/0x10
[ 163.911440][ C1] secondary_startup_64_no_verify+0x17f/0x18b
[ 163.911455][ C1] </TASK>
This commit therefore use smp_call_on_cpu() instead of
smp_call_function_single(), make rcu_torture_barrier1cb() invoked
happens on task-context.
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 431315a563015f259b28e34c5842f6166439e969 ]
When the rcutorture tests start to exit, the rcu_torture_cleanup() is
invoked to stop kthreads and release resources, if the stall-task
kthreads exist, cpu-stall has started and the rcutorture.stall_cpu
is set to a larger value, the rcu_torture_cleanup() will be blocked
for a long time and the hung-task may occur, this commit therefore
add kthread_should_stop() to the loop of cpu-stall operation, when
rcutorture tests ends, no need to wait for cpu-stall to end, exit
directly.
Use the following command to test:
insmod rcutorture.ko torture_type=srcu fwd_progress=0 stat_interval=4
stall_cpu_block=1 stall_cpu=200 stall_cpu_holdoff=10 read_exit_burst=0
object_debug=1
rmmod rcutorture
[15361.918610] INFO: task rmmod:878 blocked for more than 122 seconds.
[15361.918613] Tainted: G W
6.8.0-rc2-yoctodev-standard+ #25
[15361.918615] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[15361.918616] task:rmmod state:D stack:0 pid:878
tgid:878 ppid:773 flags:0x00004002
[15361.918621] Call Trace:
[15361.918623] <TASK>
[15361.918626] __schedule+0xc0d/0x28f0
[15361.918631] ? __pfx___schedule+0x10/0x10
[15361.918635] ? rcu_is_watching+0x19/0xb0
[15361.918638] ? schedule+0x1f6/0x290
[15361.918642] ? __pfx_lock_release+0x10/0x10
[15361.918645] ? schedule+0xc9/0x290
[15361.918648] ? schedule+0xc9/0x290
[15361.918653] ? trace_preempt_off+0x54/0x100
[15361.918657] ? schedule+0xc9/0x290
[15361.918661] schedule+0xd0/0x290
[15361.918665] schedule_timeout+0x56d/0x7d0
[15361.918669] ? debug_smp_processor_id+0x1b/0x30
[15361.918672] ? rcu_is_watching+0x19/0xb0
[15361.918676] ? __pfx_schedule_timeout+0x10/0x10
[15361.918679] ? debug_smp_processor_id+0x1b/0x30
[15361.918683] ? rcu_is_watching+0x19/0xb0
[15361.918686] ? wait_for_completion+0x179/0x4c0
[15361.918690] ? __pfx_lock_release+0x10/0x10
[15361.918693] ? __kasan_check_write+0x18/0x20
[15361.918696] ? wait_for_completion+0x9d/0x4c0
[15361.918700] ? _raw_spin_unlock_irq+0x36/0x50
[15361.918703] ? wait_for_completion+0x179/0x4c0
[15361.918707] ? _raw_spin_unlock_irq+0x36/0x50
[15361.918710] ? wait_for_completion+0x179/0x4c0
[15361.918714] ? trace_preempt_on+0x54/0x100
[15361.918718] ? wait_for_completion+0x179/0x4c0
[15361.918723] wait_for_completion+0x181/0x4c0
[15361.918728] ? __pfx_wait_for_completion+0x10/0x10
[15361.918738] kthread_stop+0x152/0x470
[15361.918742] _torture_stop_kthread+0x44/0xc0 [torture
7af7f9cbba28271a10503b653f9e05d518fbc8c3]
[15361.918752] rcu_torture_cleanup+0x2ac/0xe90 [rcutorture
f2cb1f556ee7956270927183c4c2c7749a336529]
[15361.918766] ? __pfx_rcu_torture_cleanup+0x10/0x10 [rcutorture
f2cb1f556ee7956270927183c4c2c7749a336529]
[15361.918777] ? __kasan_check_write+0x18/0x20
[15361.918781] ? __mutex_unlock_slowpath+0x17c/0x670
[15361.918789] ? __might_fault+0xcd/0x180
[15361.918793] ? find_module_all+0x104/0x1d0
[15361.918799] __x64_sys_delete_module+0x2a4/0x3f0
[15361.918803] ? __pfx___x64_sys_delete_module+0x10/0x10
[15361.918807] ? syscall_exit_to_user_mode+0x149/0x280
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8b9b443fa860276822b25057cb3ff3b28734dec0 ]
The "pipe_count > RCU_TORTURE_PIPE_LEN" check has a comment saying "Should
not happen, but...". This is only true when testing an RCU whose grace
periods are always long enough. This commit therefore fixes this comment.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/lkml/CAHk-=wi7rJ-eGq+xaxVfzFEgbL9tdf6Kc8Z89rCpfcQOKm74Tw@mail.gmail.com/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 58329c4312031603bb1786b44265c26d5065fe72 ]
As the old padata code can execute in softirq context, disable
softirqs for the new padata_do_mutithreaded code too as otherwise
lockdep will get antsy.
Reported-by: syzbot+0cb5bb0f4bf9e79db3b3@syzkaller.appspotmail.com
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7fea700e04bd3f424c2d836e98425782f97b494e ]
kernel_wait4() doesn't sleep and returns -EINTR if there is no
eligible child and signal_pending() is true.
That is why zap_pid_ns_processes() clears TIF_SIGPENDING but this is not
enough, it should also clear TIF_NOTIFY_SIGNAL to make signal_pending()
return false and avoid a busy-wait loop.
Link: https://lkml.kernel.org/r/20240608120616.GB7947@redhat.com
Fixes: 12db8b690010 ("entry: Add support for TIF_NOTIFY_SIGNAL")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Rachel Menge <rachelmenge@linux.microsoft.com>
Closes: https://lore.kernel.org/all/1386cd49-36d0-4a5c-85e9-bc42056a5a38@linux.microsoft.com/
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Wei Fu <fuweid89@gmail.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Allen Pais <apais@linux.microsoft.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joel Granados <j.granados@samsung.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Zqiang <qiang.zhang1211@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This reverts commit cec11fa2eb512ebe3a459c185f4aca1d44059bbf which is commit
35e351780fa9d8240dd6f7e4f245f9ea37e96c19 upstream.
The backport is incomplete and causes xfstests failures. The consequences
of the incomplete backport seem worse than the original issue, so pick
the lesser evil and revert until a full backport is ready.
Link: https://lore.kernel.org/stable/20240604004751.3883227-1-leah.rumancik@gmail.com/
Reported-by: Leah Rumancik <leah.rumancik@gmail.com>
Signed-off-by: Sam James <sam@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 07c54cc5988f19c9642fd463c2dbdac7fc52f777 upstream.
After the recent commit 5097cbcb38e6 ("sched/isolation: Prevent boot crash
when the boot CPU is nohz_full") the kernel no longer crashes, but there is
another problem.
In this case tick_setup_device() calls tick_take_do_timer_from_boot() to
update tick_do_timer_cpu and this triggers the WARN_ON_ONCE(irqs_disabled)
in smp_call_function_single().
Kill tick_take_do_timer_from_boot() and just use WRITE_ONCE(), the new
comment explains why this is safe (thanks Thomas!).
Fixes: 08ae95f4fd3b ("nohz_full: Allow the boot CPU to be nohz_full")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240528122019.GA28794@redhat.com
Link: https://lore.kernel.org/all/20240522151742.GA10400@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit af133562d5aff41fcdbe51f1a504ae04788b5fc0 upstream.
Allow a buffer pre-padding of up to alloc_align_mask, even if it requires
allocating additional IO TLB slots.
If the allocation alignment is bigger than IO_TLB_SIZE and min_align_mask
covers any non-zero bits in the original address between IO_TLB_SIZE and
alloc_align_mask, these bits are not preserved in the swiotlb buffer
address.
To fix this case, increase the allocation size and use a larger offset
within the allocated buffer. As a result, extra padding slots may be
allocated before the mapping start address.
Leave orig_addr in these padding slots initialized to INVALID_PHYS_ADDR.
These slots do not correspond to any CPU buffer, so attempts to sync the
data should be ignored.
The padding slots should be automatically released when the buffer is
unmapped. However, swiotlb_tbl_unmap_single() takes only the address of the
DMA buffer slot, not the first padding slot. Save the number of padding
slots in struct io_tlb_slot and use it to adjust the slot index in
swiotlb_release_slots(), so all allocated slots are properly freed.
Cc: stable@vger.kernel.org # v6.6+
Fixes: 2fd4fa5d3fb5 ("swiotlb: Fix alignment checks when both allocation and DMA masks are present")
Link: https://lore.kernel.org/linux-iommu/20240311210507.217daf8b@meshulam.tesarici.cz/
Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 14cebf689a78e8a1c041138af221ef6eac6bc7da upstream.
For swiotlb allocations >= PAGE_SIZE, the slab search historically
adjusted the stride to avoid checking unaligned slots. This had the
side-effect of aligning large mapping requests to PAGE_SIZE, but that
was broken by 0eee5ae10256 ("swiotlb: fix slot alignment checks").
Since this alignment could be relied upon drivers, reinstate PAGE_SIZE
alignment for swiotlb mappings >= PAGE_SIZE.
Cc: stable@vger.kernel.org # v6.6+
Reported-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 823353b7cf0ea9dfb09f5181d5fb2825d727200b upstream.
When allocating pages from a restricted DMA pool in swiotlb_alloc(),
the buffer address is blindly converted to a 'struct page *' that is
returned to the caller. In the unlikely event of an allocation bug,
page-unaligned addresses are not detected and slots can silently be
double-allocated.
Add a simple check of the buffer alignment in swiotlb_alloc() to make
debugging a little easier if something has gone wonky.
Cc: stable@vger.kernel.org # v6.6+
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3bd27a847a3a4827a948387cc8f0dbc9fa5931d5 upstream.
Build environments might be running with different umask settings
resulting in indeterministic file modes for the files contained in
kheaders.tar.xz. The file itself is served with 444, i.e. world
readable. Archive the files explicitly with 744,a+X to improve
reproducibility across build environments.
--mode=0444 is not suitable as directories need to be executable. Also,
444 makes it hard to delete all the readonly files after extraction.
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 74751ef5c1912ebd3e65c3b65f45587e05ce5d36 upstream.
In our production environment, we found many hung tasks which are
blocked for more than 18 hours. Their call traces are like this:
[346278.191038] __schedule+0x2d8/0x890
[346278.191046] schedule+0x4e/0xb0
[346278.191049] perf_event_free_task+0x220/0x270
[346278.191056] ? init_wait_var_entry+0x50/0x50
[346278.191060] copy_process+0x663/0x18d0
[346278.191068] kernel_clone+0x9d/0x3d0
[346278.191072] __do_sys_clone+0x5d/0x80
[346278.191076] __x64_sys_clone+0x25/0x30
[346278.191079] do_syscall_64+0x5c/0xc0
[346278.191083] ? syscall_exit_to_user_mode+0x27/0x50
[346278.191086] ? do_syscall_64+0x69/0xc0
[346278.191088] ? irqentry_exit_to_user_mode+0x9/0x20
[346278.191092] ? irqentry_exit+0x19/0x30
[346278.191095] ? exc_page_fault+0x89/0x160
[346278.191097] ? asm_exc_page_fault+0x8/0x30
[346278.191102] entry_SYSCALL_64_after_hwframe+0x44/0xae
The task was waiting for the refcount become to 1, but from the vmcore,
we found the refcount has already been 1. It seems that the task didn't
get woken up by perf_event_release_kernel() and got stuck forever. The
below scenario may cause the problem.
Thread A Thread B
... ...
perf_event_free_task perf_event_release_kernel
...
acquire event->child_mutex
...
get_ctx
... release event->child_mutex
acquire ctx->mutex
...
perf_free_event (acquire/release event->child_mutex)
...
release ctx->mutex
wait_var_event
acquire ctx->mutex
acquire event->child_mutex
# move existing events to free_list
release event->child_mutex
release ctx->mutex
put_ctx
... ...
In this case, all events of the ctx have been freed, so we couldn't
find the ctx in free_list and Thread A will miss the wakeup. It's thus
necessary to add a wakeup after dropping the reference.
Fixes: 1cf8dfe8a661 ("perf/core: Fix race between close() and fork()")
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240513103948.33570-1-haifeng.xu@shopee.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 46ba0e49b64232adac35a2bc892f1710c5b0fb7f ]
Current implementation of PID filtering logic for multi-uprobes in
uprobe_prog_run() is filtering down to exact *thread*, while the intent
for PID filtering it to filter by *process* instead. The check in
uprobe_prog_run() also differs from the analogous one in
uprobe_multi_link_filter() for some reason. The latter is correct,
checking task->mm, not the task itself.
Fix the check in uprobe_prog_run() to perform the same task->mm check.
While doing this, we also update get_pid_task() use to use PIDTYPE_TGID
type of lookup, given the intent is to get a representative task of an
entire process. This doesn't change behavior, but seems more logical. It
would hold task group leader task now, not any random thread task.
Last but not least, given multi-uprobe support is half-broken due to
this PID filtering logic (depending on whether PID filtering is
important or not), we need to make it easy for user space consumers
(including libbpf) to easily detect whether PID filtering logic was
already fixed.
We do it here by adding an early check on passed pid parameter. If it's
negative (and so has no chance of being a valid PID), we return -EINVAL.
Previous behavior would eventually return -ESRCH ("No process found"),
given there can't be any process with negative PID. This subtle change
won't make any practical change in behavior, but will allow applications
to detect PID filtering fixes easily. Libbpf fixes take advantage of
this in the next patch.
Cc: stable@vger.kernel.org
Acked-by: Jiri Olsa <jolsa@kernel.org>
Fixes: b733eeade420 ("bpf: Add pid filter support for uprobe_multi link")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2884dc7d08d98a89d8d65121524bb7533183a63a ]
After commit 1a80dbcb2dba, bpf_link can be freed by
link->ops->dealloc_deferred, but the code still tests and uses
link->ops->dealloc afterward, which leads to a use-after-free as
reported by syzbot. Actually, one of them should be sufficient, so
just call one of them instead of both. Also add a WARN_ON() in case
of any problematic implementation.
Fixes: 1a80dbcb2dba ("bpf: support deferring bpf_link dealloc to after RCU grace period")
Reported-by: syzbot+1989ee16d94720836244@syzkaller.appspotmail.com
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240602182703.207276-1-xiyou.wangcong@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit af66bfd3c8538ed21cf72af18426fc4a408665cf ]
When removing the inner map from the outer map, the inner map will be
freed after one RCU grace period and one RCU tasks trace grace
period, so it is certain that the bpf program, which may access the
inner map, has exited before the inner map is freed.
However there is no need to wait for one RCU tasks trace grace period if
the outer map is only accessed by non-sleepable program. So adding
sleepable_refcnt in bpf_map and increasing sleepable_refcnt when adding
the outer map into env->used_maps for sleepable program. Although the
max number of bpf program is INT_MAX - 1, the number of bpf programs
which are being loaded may be greater than INT_MAX, so using atomic64_t
instead of atomic_t for sleepable_refcnt. When removing the inner map
from the outer map, using sleepable_refcnt to decide whether or not a
RCU tasks trace grace period is needed before freeing the inner map.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231204140425.1480317-6-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: 2884dc7d08d9 ("bpf: Fix a potential use-after-free in bpf_link_free()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4930b7f53a298533bc31d7540b6ea8b79a000331 ]
We will need to return ref_ctr_offsets values through link_info
interface in following change, so we need to keep them around.
Storing ref_ctr_offsets values directly into bpf_uprobe array.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20231125193130.834322-3-jolsa@kernel.org
Stable-dep-of: 2884dc7d08d9 ("bpf: Fix a potential use-after-free in bpf_link_free()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b84a8aba806261d2f759ccedf4a2a6a80a5e55ba upstream.
irq_find_at_or_after() dereferences the interrupt descriptor which is
returned by mt_find() while neither holding sparse_irq_lock nor RCU read
lock, which means the descriptor can be freed between mt_find() and the
dereference:
CPU0 CPU1
desc = mt_find()
delayed_free_desc(desc)
irq_desc_get_irq(desc)
The use-after-free is reported by KASAN:
Call trace:
irq_get_next_irq+0x58/0x84
show_stat+0x638/0x824
seq_read_iter+0x158/0x4ec
proc_reg_read_iter+0x94/0x12c
vfs_read+0x1e0/0x2c8
Freed by task 4471:
slab_free_freelist_hook+0x174/0x1e0
__kmem_cache_free+0xa4/0x1dc
kfree+0x64/0x128
irq_kobj_release+0x28/0x3c
kobject_put+0xcc/0x1e0
delayed_free_desc+0x14/0x2c
rcu_do_batch+0x214/0x720
Guard the access with a RCU read lock section.
Fixes: 721255b9826b ("genirq: Use a maple tree for interrupt descriptor management")
Signed-off-by: dicken.ding <dicken.ding@mediatek.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240524091739.31611-1-dicken.ding@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c9b51ddb66b1d96e4d364c088da0f1dfb004c574 upstream.
Currently when the current line should be removed from the display
kdb_read() uses memset() to fill a temporary buffer with spaces.
The problem is not that this could be trivially implemented using a
format string rather than open coding it. The real problem is that
it is possible, on systems with a long kdb_prompt_str, to write past
the end of the tmpbuffer.
Happily, as mentioned above, this can be trivially implemented using a
format string. Make it so!
Cc: stable@vger.kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240424-kgdb_read_refactor-v3-5-f236dbe9828d@linaro.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6244917f377bf64719551b58592a02a0336a7439 upstream.
The code that handles case 14 (down) and case 16 (up) has been copy and
pasted despite being byte-for-byte identical. Combine them.
Cc: stable@vger.kernel.org # Not a bug fix but it is needed for later bug fixes
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240424-kgdb_read_refactor-v3-4-f236dbe9828d@linaro.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit db2f9c7dc29114f531df4a425d0867d01e1f1e28 upstream.
Currently, if the cursor position is not at the end of the command buffer
and the user uses the Tab-complete functions, then the console does not
leave the cursor in the correct position.
For example consider the following buffer with the cursor positioned
at the ^:
md kdb_pro 10
^
Pressing tab should result in:
md kdb_prompt_str 10
^
However this does not happen. Instead the cursor is placed at the end
(after then 10) and further cursor movement redraws incorrectly. The
same problem exists when we double-Tab but in a different part of the
code.
Fix this by sending a carriage return and then redisplaying the text to
the left of the cursor.
Cc: stable@vger.kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240424-kgdb_read_refactor-v3-3-f236dbe9828d@linaro.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 09b35989421dfd5573f0b4683c7700a7483c71f9 upstream.
Currently when kdb_read() needs to reposition the cursor it uses copy and
paste code that works by injecting an '\0' at the cursor position before
delivering a carriage-return and reprinting the line (which stops at the
'\0').
Tidy up the code by hoisting the copy and paste code into an appropriately
named function. Additionally let's replace the '\0' injection with a
proper field width parameter so that the string will be abridged during
formatting instead.
Cc: stable@vger.kernel.org # Not a bug fix but it is needed for later bug fixes
Tested-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240424-kgdb_read_refactor-v3-2-f236dbe9828d@linaro.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e9730744bf3af04cda23799029342aa3cddbc454 upstream.
Currently, when the user attempts symbol completion with the Tab key, kdb
will use strncpy() to insert the completed symbol into the command buffer.
Unfortunately it passes the size of the source buffer rather than the
destination to strncpy() with predictably horrible results. Most obviously
if the command buffer is already full but cp, the cursor position, is in
the middle of the buffer, then we will write past the end of the supplied
buffer.
Fix this by replacing the dubious strncpy() calls with memmove()/memcpy()
calls plus explicit boundary checks to make sure we have enough space
before we start moving characters around.
Reported-by: Justin Stitt <justinstitt@google.com>
Closes: https://lore.kernel.org/all/CAFhGd8qESuuifuHsNjFPR-Va3P80bxrw+LqvC8deA8GziUJLpw@mail.gmail.com/
Cc: stable@vger.kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240424-kgdb_read_refactor-v3-1-f236dbe9828d@linaro.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a6c11c0a5235fb144a65e0cb2ffd360ddc1f6c32 upstream.
The absence of IRQD_MOVE_PCNTXT prevents immediate effectiveness of
interrupt affinity reconfiguration via procfs. Instead, the change is
deferred until the next instance of the interrupt being triggered on the
original CPU.
When the interrupt next triggers on the original CPU, the new affinity is
enforced within __irq_move_irq(). A vector is allocated from the new CPU,
but the old vector on the original CPU remains and is not immediately
reclaimed. Instead, apicd->move_in_progress is flagged, and the reclaiming
process is delayed until the next trigger of the interrupt on the new CPU.
Upon the subsequent triggering of the interrupt on the new CPU,
irq_complete_move() adds a task to the old CPU's vector_cleanup list if it
remains online. Subsequently, the timer on the old CPU iterates over its
vector_cleanup list, reclaiming old vectors.
However, a rare scenario arises if the old CPU is outgoing before the
interrupt triggers again on the new CPU.
In that case irq_force_complete_move() is not invoked on the outgoing CPU
to reclaim the old apicd->prev_vector because the interrupt isn't currently
affine to the outgoing CPU, and irq_needs_fixup() returns false. Even
though __vector_schedule_cleanup() is later called on the new CPU, it
doesn't reclaim apicd->prev_vector; instead, it simply resets both
apicd->move_in_progress and apicd->prev_vector to 0.
As a result, the vector remains unreclaimed in vector_matrix, leading to a
CPU vector leak.
To address this issue, move the invocation of irq_force_complete_move()
before the irq_needs_fixup() call to reclaim apicd->prev_vector, if the
interrupt is currently or used to be affine to the outgoing CPU.
Additionally, reclaim the vector in __vector_schedule_cleanup() as well,
following a warning message, although theoretically it should never see
apicd->move_in_progress with apicd->prev_cpu pointing to an offline CPU.
Fixes: f0383c24b485 ("genirq/cpuhotplug: Add support for cleaning up move in progress")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240522220218.162423-1-dongli.zhang@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6e58e0173507e506a5627741358bc770f220e356 ]
Commit 13e1df09284d ("kheaders: explicitly validate existence of cpio
command") added an explicit check for `cpio` using `type`.
However, `type` in `dash` (which is used in some popular distributions
and base images as the shell script runner) prints the missing message
to standard output, and thus no error is printed:
$ bash -c 'type missing >/dev/null'
bash: line 1: type: missing: not found
$ dash -c 'type missing >/dev/null'
$
For instance, this issue may be seen by loongarch builders, given its
defconfig enables CONFIG_IKHEADERS since commit 9cc1df421f00 ("LoongArch:
Update Loongson-3 default config file").
Therefore, use `command -v` instead to have consistent behavior, and
take the chance to provide a more explicit error.
Fixes: 13e1df09284d ("kheaders: explicitly validate existence of cpio command")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 98e948fb60d41447fd8d2d0c3b8637fc6b6dc26d ]
We have seen an influx of syzkaller reports where a BPF program attached to
a tracepoint triggers a locking rule violation by performing a map_delete
on a sockmap/sockhash.
We don't intend to support this artificial use scenario. Extend the
existing verifier allowed-program-type check for updating sockmap/sockhash
to also cover deleting from a map.
From now on only BPF programs which were previously allowed to update
sockmap/sockhash can delete from these map types.
Fixes: ff9105993240 ("bpf, sockmap: Prevent lock inversion deadlock in map delete elem")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Reported-by: syzbot+ec941d6e24f633a59172@syzkaller.appspotmail.com
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+ec941d6e24f633a59172@syzkaller.appspotmail.com
Acked-by: John Fastabend <john.fastabend@gmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=ec941d6e24f633a59172
Link: https://lore.kernel.org/bpf/20240527-sockmap-verify-deletes-v1-1-944b372f2101@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e64746e74f717961250a155e14c156616fcd981f ]
cpumask_of_node() can be called for NUMA_NO_NODE inside do_map_benchmark()
resulting in the following sanitizer report:
UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28
index -1 is out of range for type 'cpumask [64][1]'
CPU: 1 PID: 990 Comm: dma_map_benchma Not tainted 6.9.0-rc6 #29
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:117)
ubsan_epilogue (lib/ubsan.c:232)
__ubsan_handle_out_of_bounds (lib/ubsan.c:429)
cpumask_of_node (arch/x86/include/asm/topology.h:72) [inline]
do_map_benchmark (kernel/dma/map_benchmark.c:104)
map_benchmark_ioctl (kernel/dma/map_benchmark.c:246)
full_proxy_unlocked_ioctl (fs/debugfs/file.c:333)
__x64_sys_ioctl (fs/ioctl.c:890)
do_syscall_64 (arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Use cpumask_of_node() in place when binding a kernel thread to a cpuset
of a particular node.
Note that the provided node id is checked inside map_benchmark_ioctl().
It's just a NUMA_NO_NODE case which is not handled properly later.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 65789daa8087 ("dma-mapping: add benchmark support for streaming DMA APIs")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Barry Song <baohua@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1ff05e723f7ca30644b8ec3fb093f16312e408ad ]
While validating node ids in map_benchmark_ioctl(), node_possible() may
be provided with invalid argument outside of [0,MAX_NUMNODES-1] range
leading to:
BUG: KASAN: wild-memory-access in map_benchmark_ioctl (kernel/dma/map_benchmark.c:214)
Read of size 8 at addr 1fffffff8ccb6398 by task dma_map_benchma/971
CPU: 7 PID: 971 Comm: dma_map_benchma Not tainted 6.9.0-rc6 #37
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:117)
kasan_report (mm/kasan/report.c:603)
kasan_check_range (mm/kasan/generic.c:189)
variable_test_bit (arch/x86/include/asm/bitops.h:227) [inline]
arch_test_bit (arch/x86/include/asm/bitops.h:239) [inline]
_test_bit at (include/asm-generic/bitops/instrumented-non-atomic.h:142) [inline]
node_state (include/linux/nodemask.h:423) [inline]
map_benchmark_ioctl (kernel/dma/map_benchmark.c:214)
full_proxy_unlocked_ioctl (fs/debugfs/file.c:333)
__x64_sys_ioctl (fs/ioctl.c:890)
do_syscall_64 (arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Compare node ids with sane bounds first. NUMA_NO_NODE is considered a
special valid case meaning that benchmarking kthreads won't be bound to a
cpuset of a given node.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 65789daa8087 ("dma-mapping: add benchmark support for streaming DMA APIs")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bb9025f4432f8c158322cf2c04c2b492f23eb511 ]
kthread creation failure is invalidly handled inside do_map_benchmark().
The put_task_struct() calls on the error path are supposed to balance the
get_task_struct() calls which only happen after all the kthreads are
successfully created. Rollback using kthread_stop() for already created
kthreads in case of such failure.
In normal situation call kthread_stop_put() to gracefully stop kthreads
and put their task refcounts. This should be done for all started
kthreads.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 65789daa8087 ("dma-mapping: add benchmark support for streaming DMA APIs")
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6309727ef27162deabd5c095c11af24970fba5a2 ]
Add a kthread_stop_put() helper that stops a thread and puts its task
struct. Use it to replace the various instances of kthread_stop()
followed by put_task_struct().
Remove the kthread_stop_put() macro in usbip that is similar but doesn't
return the result of kthread_stop().
[agruenba@redhat.com: fix kerneldoc comment]
Link: https://lkml.kernel.org/r/20230911111730.2565537-1-agruenba@redhat.com
[akpm@linux-foundation.org: document kthread_stop_put()'s argument]
Link: https://lkml.kernel.org/r/20230907234048.2499820-1-agruenba@redhat.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: bb9025f4432f ("dma-mapping: benchmark: fix up kthread-related error handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e569eb34970281438e2b48a3ef11c87459fcfbcb ]
btf_find_struct_member() might return NULL or an error via the
ERR_PTR() macro. However, its caller in parse_btf_field() only checks
for the NULL condition. Fix this by using IS_ERR() and returning the
error up the stack.
Link: https://lore.kernel.org/all/20240527094351.15687-1-clopez@suse.de/
Fixes: c440adfbe3025 ("tracing/probes: Support BTF based data structure field access")
Signed-off-by: Carlos López <clopez@suse.de>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1e8b7b3dbb3103d577a586ca72bc329f7b67120b ]
The patch updates the function documentation comment for
rv_en(dis)able_monitor to adhere to the kernel-doc specification.
Link: https://lore.kernel.org/linux-trace-kernel/20240520054239.61784-1-yang.lee@linux.alibaba.com
Fixes: 102227b970a15 ("rv: Add Runtime Verification (RV) interface")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b63db58e2fa5d6963db9c45df88e60060f0ff35f ]
Synthetic events create and destroy tracefs files when they are created
and removed. The tracing subsystem has its own file descriptor
representing the state of the events attached to the tracefs files.
There's a race between the eventfs files and this file descriptor of the
tracing system where the following can cause an issue:
With two scripts 'A' and 'B' doing:
Script 'A':
echo "hello int aaa" > /sys/kernel/tracing/synthetic_events
while :
do
echo 0 > /sys/kernel/tracing/events/synthetic/hello/enable
done
Script 'B':
echo > /sys/kernel/tracing/synthetic_events
Script 'A' creates a synthetic event "hello" and then just writes zero
into its enable file.
Script 'B' removes all synthetic events (including the newly created
"hello" event).
What happens is that the opening of the "enable" file has:
{
struct trace_event_file *file = inode->i_private;
int ret;
ret = tracing_check_open_get_tr(file->tr);
[..]
But deleting the events frees the "file" descriptor, and a "use after
free" happens with the dereference at "file->tr".
The file descriptor does have a reference counter, but there needs to be a
way to decrement it from the eventfs when the eventfs_inode is removed
that represents this file descriptor.
Add an optional "release" callback to the eventfs_entry array structure,
that gets called when the eventfs file is about to be removed. This allows
for the creating on the eventfs file to increment the tracing file
descriptor ref counter. When the eventfs file is deleted, it can call the
release function that will call the put function for the tracing file
descriptor.
This will protect the tracing file from being freed while a eventfs file
that references it is being opened.
Link: https://lore.kernel.org/linux-trace-kernel/20240426073410.17154-1-Tze-nan.Wu@mediatek.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240502090315.448cba46@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 5790b1fb3d672 ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reported-by: Tze-nan wu <Tze-nan.Wu@mediatek.com>
Tested-by: Tze-nan Wu (吳澤南) <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
cpu_max_write()
[ Upstream commit 49217ea147df7647cb89161b805c797487783fc0 ]
In the cgroup v2 CPU subsystem, assuming we have a
cgroup named 'test', and we set cpu.max and cpu.max.burst:
# echo 1000000 > /sys/fs/cgroup/test/cpu.max
# echo 1000000 > /sys/fs/cgroup/test/cpu.max.burst
then we check cpu.max and cpu.max.burst:
# cat /sys/fs/cgroup/test/cpu.max
1000000 100000
# cat /sys/fs/cgroup/test/cpu.max.burst
1000000
Next we set cpu.max again and check cpu.max and
cpu.max.burst:
# echo 2000000 > /sys/fs/cgroup/test/cpu.max
# cat /sys/fs/cgroup/test/cpu.max
2000000 100000
# cat /sys/fs/cgroup/test/cpu.max.burst
1000
... we find that the cpu.max.burst value changed unexpectedly.
In cpu_max_write(), the unit of the burst value returned
by tg_get_cfs_burst() is microseconds, while in cpu_max_write(),
the burst unit used for calculation should be nanoseconds,
which leads to the bug.
To fix it, get the burst value directly from tg->cfs_bandwidth.burst.
Fixes: f4183717b370 ("sched/fair: Introduce the burstable CFS controller")
Reported-by: Qixin Liao <liaoqixin@huawei.com>
Signed-off-by: Cheng Yu <serein.chengyu@huawei.com>
Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240424132438.514720-1-serein.chengyu@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a1fd0b9d751f840df23ef0e75b691fc00cfd4743 ]
Change relax_domain_level checks so that it would be possible
to include or exclude all domains from newidle balancing.
This matches the behavior described in the documentation:
-1 no request. use system default or follow request of others.
0 no search.
1 search siblings (hyperthreads in a core).
"2" enables levels 0 and 1, level_max excludes the last (level_max)
level, and level_max+1 includes all levels.
Fixes: 1d3504fcf560 ("sched, cpuset: customize sched domains, core")
Signed-off-by: Vitalii Bursov <vitaly@bursov.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/bd6de28e80073c79466ec6401cdeae78f0d4423d.1714488502.git.vitaly@bursov.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bd125a084091396f3e796bb3dc009940d9771811 ]
When the ABI was updated to prevent same name w/different args, it
missed an important corner case when fields don't end with a space.
Typically, space is used for fields to help separate them, like
"u8 field1; u8 field2". If no spaces are used, like
"u8 field1;u8 field2", then the parsing works for the first time.
However, the match check fails on a subsequent register, leading to
confusion.
This is because the match check uses argv_split() and assumes that all
fields will be split upon the space. When spaces are used, we get back
{ "u8", "field1;" }, without spaces we get back { "u8", "field1;u8" }.
This causes a mismatch, and the user program gets back -EADDRINUSE.
Add a method to detect this case before calling argv_split(). If found
force a space after the field separator character ';'. This ensures all
cases work properly for matching.
With this fix, the following are all treated as matching:
u8 field1;u8 field2
u8 field1; u8 field2
u8 field1;\tu8 field2
u8 field1;\nu8 field2
Link: https://lore.kernel.org/linux-trace-kernel/20240423162338.292-2-beaub@linux.microsoft.com
Fixes: ba470eebc2f6 ("tracing/user_events: Prevent same name but different args event")
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1e953de9e9b4ca77a9ce0fc17a0778eba3a4ca64 ]
The current code for finding and deleting events assumes that there will
never be cases when user_events are registered with the same name, but
different formats. Scenarios exist where programs want to use the same
name but have different formats. An example is multiple versions of a
program running side-by-side using the same event name, but with updated
formats in each version.
This change does not yet allow for multi-format events. If user_events
are registered with the same name but different arguments the programs
see the same return values as before. This change simply makes it
possible to easily accommodate for this.
Update find_user_event() to take in argument parameters and register
flags to accommodate future multi-format event scenarios. Have find
validate argument matching and return error pointers to cover when
an existing event has the same name but different format. Update
callers to handle error pointer logic.
Move delete_user_event() to use hash walking directly now that
find_user_event() has changed. Delete all events found that match the
register name, stop if an error occurs and report back to the user.
Update user_fields_match() to cover list_empty() scenarios now that
find_user_event() uses it directly. This makes the logic consistent
across several callsites.
Link: https://lore.kernel.org/linux-trace-kernel/20240222001807.1463-2-beaub@linux.microsoft.com
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: bd125a084091 ("tracing/user_events: Fix non-spaced field matching")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5dbd04eddb2c0841d1b3930e0a9944a2343c9cac ]
There are several scenarios that have come up where having a user_event
persist even if the process that registered it exits. The main one is
having a daemon create events on bootup that shouldn't get deleted if
the daemon has to exit or reload. Another is within OpenTelemetry
exporters, they wish to potentially check if a user_event exists on the
system to determine if exporting the data out should occur. The
user_event in this case must exist even in the absence of the owning
process running (such as the above daemon case).
Expose the previously internal flag USER_EVENT_REG_PERSIST to user
processes. Upon register or delete of events with this flag, ensure the
user is perfmon_capable to prevent random user processes with access to
tracefs from creating events that persist after exit.
Link: https://lkml.kernel.org/r/20230912180704.1284-2-beaub@linux.microsoft.com
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: bd125a084091 ("tracing/user_events: Fix non-spaced field matching")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d7a73e3f089204aee3393687e23fd45a22657b08 ]
Moving these stub functions to a .c file means we can kill a sched.h
dependency on printk.h.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Stable-dep-of: f9f67e5adc8d ("x86/numa: Fix SRAT lookup of CFMWS ranges with numa_fill_memblks()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 543576ec15b17c0c93301ac8297333c7b6e84ac7 ]
bpf_prog_attach uses attach_type_to_prog_type to enforce proper
attach type for BPF_PROG_TYPE_CGROUP_SKB. link_create uses
bpf_prog_get and relies on bpf_prog_attach_check_attach_type
to properly verify prog_type <> attach_type association.
Add missing attach_type enforcement for the link_create case.
Otherwise, it's currently possible to attach cgroup_skb prog
types to other cgroup hooks.
Fixes: af6eea57437a ("bpf: Implement bpf_link-based cgroup BPF program attachment")
Link: https://lore.kernel.org/bpf/0000000000004792a90615a1dde0@google.com/
Reported-by: syzbot+838346b979830606c854@syzkaller.appspotmail.com
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240426231621.2716876-2-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
