| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 40fa3780bac2b654edf23f6b13f4e2dd550aea10 ]
When running on linux-next (8c60c36d0b8c ("Add linux-next specific files
for 20181019")) + CONFIG_PROVE_LOCKING=y on a big.LITTLE system (e.g.
Juno or HiKey960), we get the following report:
[ 0.748225] Call trace:
[ 0.750685] lockdep_assert_cpus_held+0x30/0x40
[ 0.755236] static_key_enable_cpuslocked+0x20/0xc8
[ 0.760137] build_sched_domains+0x1034/0x1108
[ 0.764601] sched_init_domains+0x68/0x90
[ 0.768628] sched_init_smp+0x30/0x80
[ 0.772309] kernel_init_freeable+0x278/0x51c
[ 0.776685] kernel_init+0x10/0x108
[ 0.780190] ret_from_fork+0x10/0x18
The static_key in question is 'sched_asym_cpucapacity' introduced by
commit:
df054e8445a4 ("sched/topology: Add static_key for asymmetric CPU capacity optimizations")
In this particular case, we enable it because smp_prepare_cpus() will
end up fetching the capacity-dmips-mhz entry from the devicetree,
so we already have some asymmetry detected when entering sched_init_smp().
This didn't get detected in tip/sched/core because we were missing:
commit cb538267ea1e ("jump_label/lockdep: Assert we hold the hotplug lock for _cpuslocked() operations")
Calls to build_sched_domains() post sched_init_smp() will hold the
hotplug lock, it just so happens that this very first call is a
special case. As stated by a comment in sched_init_smp(), "There's no
userspace yet to cause hotplug operations" so this is a harmless
warning.
However, to both respect the semantics of underlying
callees and make lockdep happy, take the hotplug lock in
sched_init_smp(). This also satisfies the comment atop
sched_init_domains() that says "Callers must hold the hotplug lock".
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar.Eggemann@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: morten.rasmussen@arm.com
Cc: quentin.perret@arm.com
Link: http://lkml.kernel.org/r/1540301851-3048-1-git-send-email-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 28c2fae726bf5003cd209b0d5910a642af98316f ]
While dbecd7388476 ("bpf: get kernel symbol addresses via syscall")
zeroed info.nr_jited_ksyms in bpf_prog_get_info_by_fd() for queries
from unprivileged users, commit 815581c11cc2 ("bpf: get JITed image
lengths of functions via syscall") forgot about doing so and therefore
returns the #elems of the user set up buffer which is incorrect. It
also needs to indicate a info.nr_jited_func_lens of zero.
Fixes: 815581c11cc2 ("bpf: get JITed image lengths of functions via syscall")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This reverts commit 233b9d7df0e114c7e7c3674559fb0fc41ada3e8f which is
commit 53c613fe6349994f023245519265999eed75957f upstream.
It's not ready for the stable trees as there are major slowdowns
involved with this patch.
Reported-by: Jiri Kosina <jkosina@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "WoodhouseDavid" <dwmw@amazon.co.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: "SchauflerCasey" <casey.schaufler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 568fb6f42ac6851320adaea25f8f1b94de14e40a upstream.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p"),
all pointers printed with %p are printed with hashed addresses
instead of real addresses in order to avoid leaking addresses in
dmesg and syslog. But this applies to kdb too, with is unfortunate:
Entering kdb (current=0x(ptrval), pid 329) due to Keyboard Entry
kdb> ps
15 sleeping system daemon (state M) processes suppressed,
use 'ps A' to see all.
Task Addr Pid Parent [*] cpu State Thread Command
0x(ptrval) 329 328 1 0 R 0x(ptrval) *sh
0x(ptrval) 1 0 0 0 S 0x(ptrval) init
0x(ptrval) 3 2 0 0 D 0x(ptrval) rcu_gp
0x(ptrval) 4 2 0 0 D 0x(ptrval) rcu_par_gp
0x(ptrval) 5 2 0 0 D 0x(ptrval) kworker/0:0
0x(ptrval) 6 2 0 0 D 0x(ptrval) kworker/0:0H
0x(ptrval) 7 2 0 0 D 0x(ptrval) kworker/u2:0
0x(ptrval) 8 2 0 0 D 0x(ptrval) mm_percpu_wq
0x(ptrval) 10 2 0 0 D 0x(ptrval) rcu_preempt
The whole purpose of kdb is to debug, and for debugging real addresses
need to be known. In addition, data displayed by kdb doesn't go into
dmesg.
This patch replaces all %p by %px in kdb in order to display real
addresses.
Fixes: ad67b74d2469 ("printk: hash addresses printed with %p")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dded2e159208a9edc21dd5c5f583afa28d378d39 upstream.
On a powerpc 8xx, 'btc' fails as follows:
Entering kdb (current=0x(ptrval), pid 282) due to Keyboard Entry
kdb> btc
btc: cpu status: Currently on cpu 0
Available cpus: 0
kdb_getarea: Bad address 0x0
when booting the kernel with 'debug_boot_weak_hash', it fails as well
Entering kdb (current=0xba99ad80, pid 284) due to Keyboard Entry
kdb> btc
btc: cpu status: Currently on cpu 0
Available cpus: 0
kdb_getarea: Bad address 0xba99ad80
On other platforms, Oopses have been observed too, see
https://github.com/linuxppc/linux/issues/139
This is due to btc calling 'btt' with %p pointer as an argument.
This patch replaces %p by %px to get the real pointer value as
expected by 'btt'
Fixes: ad67b74d2469 ("printk: hash addresses printed with %p")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 59158ec4aef7d44be51a6f3e7e17fc64c32604eb ]
Current kprobe event doesn't checks correctly whether the
given event is on unloaded module or not. It just checks
the event has ":" in the name.
That is not enough because if we define a probe on non-exist
symbol on loaded module, it allows to define that (with
warning message)
To ensure it correctly, this searches the module name on
loaded module list and only if there is not, it allows to
define it. (this event will be available when the target
module is loaded)
Link: http://lkml.kernel.org/r/153547309528.26502.8300278470528281328.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1ae80cf31938c8f77c37a29bbe29e7f1cd492be8 upstream.
The map-in-map frequently serves as a mechanism for atomic
snapshotting of state that a BPF program might record. The current
implementation is dangerous to use in this way, however, since
userspace has no way of knowing when all programs that might have
retrieved the "old" value of the map may have completed.
This change ensures that map update operations on map-in-map map types
always wait for all references to the old map to drop before returning
to userspace.
Signed-off-by: Daniel Colascione <dancol@google.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d2f007dbe7e4c9583eea6eb04d60001e85c6f1bd upstream.
The current logic first clones the extent array and sorts both copies, then
maps the lower IDs of the forward mapping into the lower namespace, but
doesn't map the lower IDs of the reverse mapping.
This means that code in a nested user namespace with >5 extents will see
incorrect IDs. It also breaks some access checks, like
inode_owner_or_capable() and privileged_wrt_inode_uidgid(), so a process
can incorrectly appear to be capable relative to an inode.
To fix it, we have to make sure that the "lower_first" members of extents
in both arrays are translated; and we have to make sure that the reverse
map is sorted *after* the translation (since otherwise the translation can
break the sorting).
This is CVE-2018-18955.
Fixes: 6397fac4915a ("userns: bump idmap limits to 340")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Tested-by: Eric W. Biederman <ebiederm@xmission.com>
Reviewed-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 18858511fd8a877303cc34c06efa461b26a0e070 upstream.
Return -ENOENT error if there is no target synthetic event.
This notices an operation failure to user as below;
# echo 'wakeup_latency u64 lat; pid_t pid;' > synthetic_events
# echo '!wakeup' >> synthetic_events
sh: write error: No such file or directory
Link: http://lkml.kernel.org/r/154013449986.25576.9487131386597290172.stgit@devbox
Acked-by: Tom Zanussi <zanussi@linux.intel.com>
Tested-by: Tom Zanussi <zanussi@linux.intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Rajvi Jingar <rajvi.jingar@intel.com>
Cc: stable@vger.kernel.org
Fixes: 4b147936fa50 ('tracing: Add support for 'synthetic' events')
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 746a923b863a1065ef77324e1e43f19b1a3eab5c upstream.
Commit 1e77d0a1ed74 ("genirq: Sanitize spurious interrupt detection of
threaded irqs") made detection of spurious interrupts work for threaded
handlers by:
a) incrementing a counter every time the thread returns IRQ_HANDLED, and
b) checking whether that counter has increased every time the thread is
woken.
However for oneshot interrupts, the commit unmasks the interrupt before
incrementing the counter. If another interrupt occurs right after
unmasking but before the counter is incremented, that interrupt is
incorrectly considered spurious:
time
| irq_thread()
| irq_thread_fn()
| action->thread_fn()
| irq_finalize_oneshot()
| unmask_threaded_irq() /* interrupt is unmasked */
|
| /* interrupt fires, incorrectly deemed spurious */
|
| atomic_inc(&desc->threads_handled); /* counter is incremented */
v
This is observed with a hi3110 CAN controller receiving data at high volume
(from a separate machine sending with "cangen -g 0 -i -x"): The controller
signals a huge number of interrupts (hundreds of millions per day) and
every second there are about a dozen which are deemed spurious.
In theory with high CPU load and the presence of higher priority tasks, the
number of incorrectly detected spurious interrupts might increase beyond
the 99,900 threshold and cause disablement of the interrupt.
In practice it just increments the spurious interrupt count. But that can
cause people to waste time investigating it over and over.
Fix it by moving the accounting before the invocation of
irq_finalize_oneshot().
[ tglx: Folded change log update ]
Fixes: 1e77d0a1ed74 ("genirq: Sanitize spurious interrupt detection of threaded irqs")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Akshay Bhat <akshay.bhat@timesys.com>
Cc: Casey Fitzpatrick <casey.fitzpatrick@timesys.com>
Cc: stable@vger.kernel.org # v3.16+
Link: https://lkml.kernel.org/r/1dfd8bbd16163940648045495e3e9698e63b50ad.1539867047.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 277fcdb2cfee38ccdbe07e705dbd4896ba0c9930 upstream.
log_buf_len_setup does not check input argument before passing it to
simple_strtoull. The argument would be a NULL pointer if "log_buf_len",
without its value, is set in command line and thus causes the following
panic.
PANIC: early exception 0xe3 IP 10:ffffffffaaeacd0d error 0 cr2 0x0
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc4-yocto-standard+ #1
[ 0.000000] RIP: 0010:_parse_integer_fixup_radix+0xd/0x70
...
[ 0.000000] Call Trace:
[ 0.000000] simple_strtoull+0x29/0x70
[ 0.000000] memparse+0x26/0x90
[ 0.000000] log_buf_len_setup+0x17/0x22
[ 0.000000] do_early_param+0x57/0x8e
[ 0.000000] parse_args+0x208/0x320
[ 0.000000] ? rdinit_setup+0x30/0x30
[ 0.000000] parse_early_options+0x29/0x2d
[ 0.000000] ? rdinit_setup+0x30/0x30
[ 0.000000] parse_early_param+0x36/0x4d
[ 0.000000] setup_arch+0x336/0x99e
[ 0.000000] start_kernel+0x6f/0x4ee
[ 0.000000] x86_64_start_reservations+0x24/0x26
[ 0.000000] x86_64_start_kernel+0x6f/0x72
[ 0.000000] secondary_startup_64+0xa4/0xb0
This patch adds a check to prevent the panic.
Link: http://lkml.kernel.org/r/1538239553-81805-1-git-send-email-zhe.he@windriver.com
Cc: stable@vger.kernel.org
Cc: rostedt@goodmis.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6a32c2469c3fbfee8f25bcd20af647326650a6cf upstream.
Building any configuration with 'make W=1' produces a warning:
kernel/bounds.c:16:6: warning: no previous prototype for 'foo' [-Wmissing-prototypes]
When also passing -Werror, this prevents us from building any other files.
Nobody ever calls the function, but we can't make it 'static' either
since we want the compiler output.
Calling it 'main' instead however avoids the warning, because gcc
does not insist on having a declaration for main.
Link: http://lkml.kernel.org/r/20181005083313.2088252-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a36700589b85443e28170be59fa11c8a104130a5 upstream.
While fixing an out of bounds array access in known_siginfo_layout
reported by the kernel test robot it became apparent that the same bug
exists in siginfo_layout and affects copy_siginfo_from_user32.
The straight forward fix that makes guards against making this mistake
in the future and should keep the code size small is to just take an
unsigned signal number instead of a signed signal number, as I did to
fix known_siginfo_layout.
Cc: stable@vger.kernel.org
Fixes: cc731525f26a ("signal: Remove kernel interal si_code magic")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3597dfe01d12f570bc739da67f857fd222a3ea66 ]
Instead of playing whack-a-mole and changing SEND_SIG_PRIV to
SEND_SIG_FORCED throughout the kernel to ensure a pid namespace init
gets signals sent by the kernel, stop allowing a pid namespace init to
ignore SIGKILL or SIGSTOP sent by the kernel. A pid namespace init is
only supposed to be able to ignore signals sent from itself and
children with SIG_DFL.
Fixes: 921cf9f63089 ("signals: protect cinit from unblocked SIG_DFL signals")
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a9c676bc8fc58d00eea9836fb14ee43c0346416a ]
Edward Cree says:
In check_mem_access(), for the PTR_TO_CTX case, after check_ctx_access()
has supplied a reg_type, the other members of the register state are set
appropriately. Previously reg.range was set to 0, but as it is in a
union with reg.map_ptr, which is larger, upper bytes of the latter were
left in place. This then caused the memcmp() in regsafe() to fail,
preventing some branches from being pruned (and occasionally causing the
same program to take a varying number of processed insns on repeated
verifier runs).
Fix the instability by clearing bpf_reg_state in __mark_reg_[un]known()
Fixes: f1174f77b50c ("bpf/verifier: rework value tracking")
Debugged-by: Edward Cree <ecree@solarflare.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 819319fc93461c07b9cdb3064f154bd8cfd48172 ]
Make reuse_unused_kprobe() to return error code if
it fails to reuse unused kprobe for optprobe instead
of calling BUG_ON().
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/153666124040.21306.14150398706331307654.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 22839869f21ab3850fbbac9b425ccc4c0023926f ]
The sigaltstack(2) system call fails with -ENOMEM if the new alternative
signal stack is found to be smaller than SIGMINSTKSZ. On architectures
such as arm64, where the native value for SIGMINSTKSZ is larger than
the compat value, this can result in an unexpected error being reported
to a compat task. See, for example:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=904385
This patch fixes the problem by extending do_sigaltstack to take the
minimum signal stack size as an additional parameter, allowing the
native and compat system call entry code to pass in their respective
values. COMPAT_SIGMINSTKSZ is just defined as SIGMINSTKSZ if it has not
been defined by the architecture.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Reported-by: Steve McIntyre <steve.mcintyre@arm.com>
Tested-by: Steve McIntyre <93sam@debian.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9506a7425b094d2f1d9c877ed5a78f416669269b ]
It was found that when debug_locks was turned off because of a problem
found by the lockdep code, the system performance could drop quite
significantly when the lock_stat code was also configured into the
kernel. For instance, parallel kernel build time on a 4-socket x86-64
server nearly doubled.
Further analysis into the cause of the slowdown traced back to the
frequent call to debug_locks_off() from the __lock_acquired() function
probably due to some inconsistent lockdep states with debug_locks
off. The debug_locks_off() function did an unconditional atomic xchg
to write a 0 value into debug_locks which had already been set to 0.
This led to severe cacheline contention in the cacheline that held
debug_locks. As debug_locks is being referenced in quite a few different
places in the kernel, this greatly slow down the system performance.
To prevent that trashing of debug_locks cacheline, lock_acquired()
and lock_contended() now checks the state of debug_locks before
proceeding. The debug_locks_off() function is also modified to check
debug_locks before calling __debug_locks_off().
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1539913518-15598-1-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 53c613fe6349994f023245519265999eed75957f upstream.
STIBP is a feature provided by certain Intel ucodes / CPUs. This feature
(once enabled) prevents cross-hyperthread control of decisions made by
indirect branch predictors.
Enable this feature if
- the CPU is vulnerable to spectre v2
- the CPU supports SMT and has SMT siblings online
- spectre_v2 mitigation autoselection is enabled (default)
After some previous discussion, this leaves STIBP on all the time, as wrmsr
on crossing kernel boundary is a no-no. This could perhaps later be a bit
more optimized (like disabling it in NOHZ, experiment with disabling it in
idle, etc) if needed.
Note that the synchronization of the mask manipulation via newly added
spec_ctrl_mutex is currently not strictly needed, as the only updater is
already being serialized by cpu_add_remove_lock, but let's make this a
little bit more future-proof.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "WoodhouseDavid" <dwmw@amazon.co.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: "SchauflerCasey" <casey.schaufler@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/nycvar.YFH.7.76.1809251438240.15880@cbobk.fhfr.pm
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a3ceed87b07769fb80ce9dc6b604e515dba14c4b upstream.
early_cma does not check input argument before passing it to
simple_strtoull. The argument would be a NULL pointer if "cma", without
its value, is set in command line and thus causes the following panic.
PANIC: early exception 0xe3 IP 10:ffffffffa3e9db8d error 0 cr2 0x0
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc3-yocto-standard+ #7
[ 0.000000] RIP: 0010:_parse_integer_fixup_radix+0xd/0x70
...
[ 0.000000] Call Trace:
[ 0.000000] simple_strtoull+0x29/0x70
[ 0.000000] memparse+0x26/0x90
[ 0.000000] early_cma+0x17/0x6a
[ 0.000000] do_early_param+0x57/0x8e
[ 0.000000] parse_args+0x208/0x320
[ 0.000000] ? rdinit_setup+0x30/0x30
[ 0.000000] parse_early_options+0x29/0x2d
[ 0.000000] ? rdinit_setup+0x30/0x30
[ 0.000000] parse_early_param+0x36/0x4d
[ 0.000000] setup_arch+0x336/0x99e
[ 0.000000] start_kernel+0x6f/0x4e6
[ 0.000000] x86_64_start_reservations+0x24/0x26
[ 0.000000] x86_64_start_kernel+0x6f/0x72
[ 0.000000] secondary_startup_64+0xa4/0xb0
This patch adds a check to prevent the panic.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0962590e553331db2cc0aef2dc35c57f6300dbbe upstream.
ALU operations on pointers such as scalar_reg += map_value_ptr are
handled in adjust_ptr_min_max_vals(). Problem is however that map_ptr
and range in the register state share a union, so transferring state
through dst_reg->range = ptr_reg->range is just buggy as any new
map_ptr in the dst_reg is then truncated (or null) for subsequent
checks. Fix this by adding a raw member and use it for copying state
over to dst_reg.
Fixes: f1174f77b50c ("bpf/verifier: rework value tracking")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Ingo writes:
"scheduler fixes:
Two fixes: a CFS-throttling bug fix, and an interactivity fix."
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix the min_vruntime update logic in dequeue_entity()
sched/fair: Fix throttle_list starvation with low CFS quota
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Steven writes:
"tracing: A few small fixes to synthetic events
Masami found some issues with the creation of synthetic events. The
first two patches fix handling of unsigned type, and handling of a
space before an ending semi-colon.
The third patch adds a selftest to test the processing of synthetic
events."
* tag 'trace-v4.19-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
selftests: ftrace: Add synthetic event syntax testcase
tracing: Fix synthetic event to allow semicolon at end
tracing: Fix synthetic event to accept unsigned modifier
|
|
Fix synthetic event to allow independent semicolon at end.
The synthetic_events interface accepts a semicolon after the
last word if there is no space.
# echo "myevent u64 var;" >> synthetic_events
But if there is a space, it returns an error.
# echo "myevent u64 var ;" > synthetic_events
sh: write error: Invalid argument
This behavior is difficult for users to understand. Let's
allow the last independent semicolon too.
Link: http://lkml.kernel.org/r/153986835420.18251.2191216690677025744.stgit@devbox
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: stable@vger.kernel.org
Fixes: commit 4b147936fa50 ("tracing: Add support for 'synthetic' events")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Fix synthetic event to accept unsigned modifier for its field type
correctly.
Currently, synthetic_events interface returns error for "unsigned"
modifiers as below;
# echo "myevent unsigned long var" >> synthetic_events
sh: write error: Invalid argument
This is because argv_split() breaks "unsigned long" into "unsigned"
and "long", but parse_synth_field() doesn't expected it.
With this fix, synthetic_events can handle the "unsigned long"
correctly like as below;
# echo "myevent unsigned long var" >> synthetic_events
# cat synthetic_events
myevent unsigned long var
Link: http://lkml.kernel.org/r/153986832571.18251.8448135724590496531.stgit@devbox
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: stable@vger.kernel.org
Fixes: commit 4b147936fa50 ("tracing: Add support for 'synthetic' events")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
David writes:
"Networking
1) Fix gro_cells leak in xfrm layer, from Li RongQing.
2) BPF selftests change RLIMIT_MEMLOCK blindly, don't do that. From
Eric Dumazet.
3) AF_XDP calls synchronize_net() under RCU lock, fix from Björn
Töpel.
4) Out of bounds packet access in _decode_session6(), from Alexei
Starovoitov.
5) Several ethtool bugs, where we copy a struct into the kernel twice
and our validations of the values in the first copy can be
invalidated by the second copy due to asynchronous updates to the
memory by the user. From Wenwen Wang.
6) Missing netlink attribute validation in cls_api, from Davide
Caratti.
7) LLC SAP sockets neet to be SOCK_RCU FREE, from Cong Wang.
8) rxrpc operates on wrong kvec, from Yue Haibing.
9) A regression was introduced by the disassosciation of route
neighbour references in rt6_probe(), causing probe for
neighbourless routes to not be properly rate limited. Fix from
Sabrina Dubroca.
10) Unsafe RCU locking in tipc, from Tung Nguyen.
11) Use after free in inet6_mc_check(), from Eric Dumazet.
12) PMTU from icmp packets should update the SCTP transport pathmtu,
from Xin Long.
13) Missing peer put on error in rxrpc, from David Howells.
14) Fix pedit in nfp driver, from Pieter Jansen van Vuuren.
15) Fix overflowing shift statement in qla3xxx driver, from Nathan
Chancellor.
16) Fix Spectre v1 in ptp code, from Gustavo A. R. Silva.
17) udp6_unicast_rcv_skb() interprets udpv6_queue_rcv_skb() return
value in an inverted manner, fix from Paolo Abeni.
18) Fix missed unresolved entries in ipmr dumps, from Nikolay
Aleksandrov.
19) Fix NAPI handling under high load, we can completely miss events
when NAPI has to loop more than one time in a cycle. From Heiner
Kallweit."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (49 commits)
ip6_tunnel: Fix encapsulation layout
tipc: fix info leak from kernel tipc_event
net: socket: fix a missing-check bug
net: sched: Fix for duplicate class dump
r8169: fix NAPI handling under high load
net: ipmr: fix unresolved entry dumps
net: mscc: ocelot: Fix comment in ocelot_vlant_wait_for_completion()
sctp: fix the data size calculation in sctp_data_size
virtio_net: avoid using netif_tx_disable() for serializing tx routine
udp6: fix encap return code for resubmitting
mlxsw: core: Fix use-after-free when flashing firmware during init
sctp: not free the new asoc when sctp_wait_for_connect returns err
sctp: fix race on sctp_id2asoc
r8169: re-enable MSI-X on RTL8168g
net: bpfilter: use get_pid_task instead of pid_task
ptp: fix Spectre v1 vulnerability
net: qla3xxx: Remove overflowing shift statement
geneve, vxlan: Don't set exceptions if skb->len < mtu
geneve, vxlan: Don't check skb_dst() twice
sctp: get pr_assoc and pr_stream all status with SCTP_PR_SCTP_ALL instead
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Steven writes:
"tracing: Two fixes for 4.19
This fixes two bugs:
- Fix size mismatch of tracepoint array
- Have preemptirq test module use same clock source of the selftest"
* tag 'trace-v4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Use trace_clock_local() for looping in preemptirq_delay_test.c
tracepoint: Fix tracepoint array element size mismatch
|
|
The preemptirq_delay_test module is used for the ftrace selftest code that
tests the latency tracers. The problem is that it uses ktime for the delay
loop, and then checks the tracer to see if the delay loop is caught, but the
tracer uses trace_clock_local() which uses various different other clocks to
measure the latency. As ktime uses the clock cycles, and the code then
converts that to nanoseconds, it causes rounding errors, and the preemptirq
latency tests are failing due to being off by 1 (it expects to see a delay
of 500000 us, but the delay is only 499999 us). This is happening due to a
rounding error in the ktime (which is totally legit). The purpose of the
test is to see if it can catch the delay, not to test the accuracy between
trace_clock_local() and ktime_get(). Best to use apples to apples, and have
the delay loop use the same clock as the latency tracer does.
Cc: stable@vger.kernel.org
Fixes: f96e8577da102 ("lib: Add module for testing preemptoff/irqsoff latency tracers")
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
commit 46e0c9be206f ("kernel: tracepoints: add support for relative
references") changes the layout of the __tracepoint_ptrs section on
architectures supporting relative references. However, it does so
without turning struct tracepoint * const into const int elsewhere in
the tracepoint code, which has the following side-effect:
Setting mod->num_tracepoints is done in by module.c:
mod->tracepoints_ptrs = section_objs(info, "__tracepoints_ptrs",
sizeof(*mod->tracepoints_ptrs),
&mod->num_tracepoints);
Basically, since sizeof(*mod->tracepoints_ptrs) is a pointer size
(rather than sizeof(int)), num_tracepoints is erroneously set to half the
size it should be on 64-bit arch. So a module with an odd number of
tracepoints misses the last tracepoint due to effect of integer
division.
So in the module going notifier:
for_each_tracepoint_range(mod->tracepoints_ptrs,
mod->tracepoints_ptrs + mod->num_tracepoints,
tp_module_going_check_quiescent, NULL);
the expression (mod->tracepoints_ptrs + mod->num_tracepoints) actually
evaluates to something within the bounds of the array, but miss the
last tracepoint if the number of tracepoints is odd on 64-bit arch.
Fix this by introducing a new typedef: tracepoint_ptr_t, which
is either "const int" on architectures that have PREL32 relocations,
or "struct tracepoint * const" on architectures that does not have
this feature.
Also provide a new tracepoint_ptr_defer() static inline to
encapsulate deferencing this type rather than duplicate code and
ugly idefs within the for_each_tracepoint_range() implementation.
This issue appears in 4.19-rc kernels, and should ideally be fixed
before the end of the rc cycle.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Link: http://lkml.kernel.org/r/20181013191050.22389-1-mathieu.desnoyers@efficios.com
Link: http://lkml.kernel.org/r/20180704083651.24360-7-ard.biesheuvel@linaro.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morris <james.morris@microsoft.com>
Cc: James Morris <jmorris@namei.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The comment and the code around the update_min_vruntime() call in
dequeue_entity() are not in agreement.
From commit:
b60205c7c558 ("sched/fair: Fix min_vruntime tracking")
I think that we want to update min_vruntime when a task is sleeping/migrating.
So, the check is inverted there - fix it.
Signed-off-by: Song Muchun <smuchun@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: b60205c7c558 ("sched/fair: Fix min_vruntime tracking")
Link: http://lkml.kernel.org/r/20181014112612.2614-1-smuchun@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2018-10-14
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix xsk map update and delete operation to not call synchronize_net()
but to piggy back on SOCK_RCU_FREE for sockets instead as we are not
allowed to sleep under RCU, from Björn.
2) Do not change RLIMIT_MEMLOCK in reuseport_bpf selftest if the process
already has unlimited RLIMIT_MEMLOCK, from Eric.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Dmitry writes:
"Input updates for v4.19-rc7
- we added a few scheduling points into various input interfaces to
ensure that large writes will not cause RCU stalls
- fixed configuring PS/2 keyboards as wakeup devices on newer
platforms
- added a new Xbox gamepad ID."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: uinput - add a schedule point in uinput_inject_events()
Input: evdev - add a schedule point in evdev_write()
Input: mousedev - add a schedule point in mousedev_write()
Input: i8042 - enable keyboard wakeups by default when s2idle is used
Input: xpad - add support for Xbox1 PDP Camo series gamepad
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Tejun writes:
"cgroup fixes for v4.19-rc7
One cgroup2 threaded mode fix for v4.19-rc7. While threaded mode
isn't used widely (yet) and the bug requires somewhat convoluted
sequence of operations, it causes a userland visible malfunction -
EINVAL on a valid attempt to enable threaded mode. This pull request
contains the fix"
* 'for-4.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Fix dom_cgrp propagation when enabling threaded mode
|
|
With a very low cpu.cfs_quota_us setting, such as the minimum of 1000,
distribute_cfs_runtime may not empty the throttled_list before it runs
out of runtime to distribute. In that case, due to the change from
c06f04c7048 to put throttled entries at the head of the list, later entries
on the list will starve. Essentially, the same X processes will get pulled
off the list, given CPU time and then, when expired, get put back on the
head of the list where distribute_cfs_runtime will give runtime to the same
set of processes leaving the rest.
Fix the issue by setting a bit in struct cfs_bandwidth when
distribute_cfs_runtime is running, so that the code in throttle_cfs_rq can
decide to put the throttled entry on the tail or the head of the list. The
bit is set/cleared by the callers of distribute_cfs_runtime while they hold
cfs_bandwidth->lock.
This is easy to reproduce with a handful of CPU consumers. I use 'crash' on
the live system. In some cases you can simply look at the throttled list and
see the later entries are not changing:
crash> list cfs_rq.throttled_list -H 0xffff90b54f6ade40 -s cfs_rq.runtime_remaining | paste - - | awk '{print $1" "$4}' | pr -t -n3
1 ffff90b56cb2d200 -976050
2 ffff90b56cb2cc00 -484925
3 ffff90b56cb2bc00 -658814
4 ffff90b56cb2ba00 -275365
5 ffff90b166a45600 -135138
6 ffff90b56cb2da00 -282505
7 ffff90b56cb2e000 -148065
8 ffff90b56cb2fa00 -872591
9 ffff90b56cb2c000 -84687
10 ffff90b56cb2f000 -87237
11 ffff90b166a40a00 -164582
crash> list cfs_rq.throttled_list -H 0xffff90b54f6ade40 -s cfs_rq.runtime_remaining | paste - - | awk '{print $1" "$4}' | pr -t -n3
1 ffff90b56cb2d200 -994147
2 ffff90b56cb2cc00 -306051
3 ffff90b56cb2bc00 -961321
4 ffff90b56cb2ba00 -24490
5 ffff90b166a45600 -135138
6 ffff90b56cb2da00 -282505
7 ffff90b56cb2e000 -148065
8 ffff90b56cb2fa00 -872591
9 ffff90b56cb2c000 -84687
10 ffff90b56cb2f000 -87237
11 ffff90b166a40a00 -164582
Sometimes it is easier to see by finding a process getting starved and looking
at the sched_info:
crash> task ffff8eb765994500 sched_info
PID: 7800 TASK: ffff8eb765994500 CPU: 16 COMMAND: "cputest"
sched_info = {
pcount = 8,
run_delay = 697094208,
last_arrival = 240260125039,
last_queued = 240260327513
},
crash> task ffff8eb765994500 sched_info
PID: 7800 TASK: ffff8eb765994500 CPU: 16 COMMAND: "cputest"
sched_info = {
pcount = 8,
run_delay = 697094208,
last_arrival = 240260125039,
last_queued = 240260327513
},
Signed-off-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Ben Segall <bsegall@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: c06f04c70489 ("sched: Fix potential near-infinite distribute_cfs_runtime() loop")
Link: http://lkml.kernel.org/r/20181008143639.GA4019@pauld.bos.csb
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The XSKMAP update and delete functions called synchronize_net(), which
can sleep. It is not allowed to sleep during an RCU read section.
Instead we need to make sure that the sock sk_destruct (xsk_destruct)
function is asynchronously called after an RCU grace period. Setting
the SOCK_RCU_FREE flag for XDP sockets takes care of this.
Fixes: fbfc504a24f5 ("bpf: introduce new bpf AF_XDP map type BPF_MAP_TYPE_XSKMAP")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Dave writes:
"Networking fixes:
1) Fix truncation of 32-bit right shift in bpf, from Jann Horn.
2) Fix memory leak in wireless wext compat, from Stefan Seyfried.
3) Use after free in cfg80211's reg_process_hint(), from Yu Zhao.
4) Need to cancel pending work when unbinding in smsc75xx otherwise
we oops, also from Yu Zhao.
5) Don't allow enslaving a team device to itself, from Ido Schimmel.
6) Fix backwards compat with older userspace for rtnetlink FDB dumps.
From Mauricio Faria.
7) Add validation of tc policy netlink attributes, from David Ahern.
8) Fix RCU locking in rawv6_send_hdrinc(), from Wei Wang."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
net: mvpp2: Extract the correct ethtype from the skb for tx csum offload
ipv6: take rcu lock in rawv6_send_hdrinc()
net: sched: Add policy validation for tc attributes
rtnetlink: fix rtnl_fdb_dump() for ndmsg header
yam: fix a missing-check bug
net: bpfilter: Fix type cast and pointer warnings
net: cxgb3_main: fix a missing-check bug
bpf: 32-bit RSH verification must truncate input before the ALU op
net: phy: phylink: fix SFP interface autodetection
be2net: don't flip hw_features when VXLANs are added/deleted
net/packet: fix packet drop as of virtio gso
net: dsa: b53: Keep CPU port as tagged in all VLANs
openvswitch: load NAT helper
bnxt_en: get the reduced max_irqs by the ones used by RDMA
bnxt_en: free hwrm resources, if driver probe fails.
bnxt_en: Fix enables field in HWRM_QUEUE_COS2BW_CFG request
bnxt_en: Fix VNIC reservations on the PF.
team: Forbid enslaving team device to itself
net/usb: cancel pending work when unbinding smsc75xx
mlxsw: spectrum: Delete RIF when VLAN device is removed
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Ingo writes:
"perf fixes:
- fix a CPU#0 hot unplug bug and a PCI enumeration bug in the x86 Intel uncore PMU driver
- fix a CPU event enumeration bug in the x86 AMD PMU driver
- fix a perf ring-buffer corruption bug when using tracepoints
- fix a PMU unregister locking bug"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/amd/uncore: Set ThreadMask and SliceMask for L3 Cache perf events
perf/x86/intel/uncore: Fix PCI BDF address of M3UPI on SKX
perf/ring_buffer: Prevent concurent ring buffer access
perf/x86/intel/uncore: Use boot_cpu_data.phys_proc_id instead of hardcorded physical package ID 0
perf/core: Fix perf_pmu_unregister() locking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Ingo writes:
"scheduler fixes:
These fixes address a rather involved performance regression between
v4.17->v4.19 in the sched/numa auto-balancing code. Since distros
really need this fix we accelerated it to sched/urgent for a faster
upstream merge.
NUMA scheduling and balancing performance is now largely back to
v4.17 levels, without reintroducing the NUMA placement bugs that
v4.18 and v4.19 fixed.
Many thanks to Srikar Dronamraju, Mel Gorman and Jirka Hladky, for
reporting, testing, re-testing and solving this rather complex set of
bugs."
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/numa: Migrate pages to local nodes quicker early in the lifetime of a task
mm, sched/numa: Remove rate-limiting of automatic NUMA balancing migration
sched/numa: Avoid task migration for small NUMA improvement
mm/migrate: Use spin_trylock() while resetting rate limit
sched/numa: Limit the conditions where scan period is reset
sched/numa: Reset scan rate whenever task moves across nodes
sched/numa: Pass destination CPU as a parameter to migrate_task_rq
sched/numa: Stop multiple tasks from moving to the CPU at the same time
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2018-10-05
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix to truncate input on ALU operations in 32 bit mode, from Jann.
2) Fixes for cgroup local storage to reject reserved flags on element
update and rejection of map allocation with zero-sized value, from Roman.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When I wrote commit 468f6eafa6c4 ("bpf: fix 32-bit ALU op verification"), I
assumed that, in order to emulate 64-bit arithmetic with 32-bit logic, it
is sufficient to just truncate the output to 32 bits; and so I just moved
the register size coercion that used to be at the start of the function to
the end of the function.
That assumption is true for almost every op, but not for 32-bit right
shifts, because those can propagate information towards the least
significant bit. Fix it by always truncating inputs for 32-bit ops to 32
bits.
Also get rid of the coerce_reg_to_size() after the ALU op, since that has
no effect.
Fixes: 468f6eafa6c4 ("bpf: fix 32-bit ALU op verification")
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
A cgroup which is already a threaded domain may be converted into a
threaded cgroup if the prerequisite conditions are met. When this
happens, all threaded descendant should also have their ->dom_cgrp
updated to the new threaded domain cgroup. Unfortunately, this
propagation was missing leading to the following failure.
# cd /sys/fs/cgroup/unified
# cat cgroup.subtree_control # show that no controllers are enabled
# mkdir -p mycgrp/a/b/c
# echo threaded > mycgrp/a/b/cgroup.type
At this point, the hierarchy looks as follows:
mycgrp [d]
a [dt]
b [t]
c [inv]
Now let's make node "a" threaded (and thus "mycgrp" s made "domain threaded"):
# echo threaded > mycgrp/a/cgroup.type
By this point, we now have a hierarchy that looks as follows:
mycgrp [dt]
a [t]
b [t]
c [inv]
But, when we try to convert the node "c" from "domain invalid" to
"threaded", we get ENOTSUP on the write():
# echo threaded > mycgrp/a/b/c/cgroup.type
sh: echo: write error: Operation not supported
This patch fixes the problem by
* Moving the opencoded ->dom_cgrp save and restoration in
cgroup_enable_threaded() into cgroup_{save|restore}_control() so
that mulitple cgroups can be handled.
* Updating all threaded descendants' ->dom_cgrp to point to the new
dom_cgrp when enabling threaded mode.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com>
Reported-by: Amin Jamali <ajamali@pivotal.io>
Reported-by: Joao De Almeida Pereira <jpereira@pivotal.io>
Link: https://lore.kernel.org/r/CAKgNAkhHYCMn74TCNiMJ=ccLd7DcmXSbvw3CbZ1YREeG7iJM5g@mail.gmail.com
Fixes: 454000adaa2a ("cgroup: introduce cgroup->dom_cgrp and threaded css_set handling")
Cc: stable@vger.kernel.org # v4.14+
|
|
If CONFIG_WW_MUTEX_SELFTEST=y is enabled, booting an image
in an arm64 virtual machine results in the following
traceback if 8 CPUs are enabled:
DEBUG_LOCKS_WARN_ON(__owner_task(owner) != current)
WARNING: CPU: 2 PID: 537 at kernel/locking/mutex.c:1033 __mutex_unlock_slowpath+0x1a8/0x2e0
...
Call trace:
__mutex_unlock_slowpath()
ww_mutex_unlock()
test_cycle_work()
process_one_work()
worker_thread()
kthread()
ret_from_fork()
If requesting b_mutex fails with -EDEADLK, the error variable
is reassigned to the return value from calling ww_mutex_lock
on a_mutex again. If this call fails, a_mutex is not locked.
It is, however, unconditionally unlocked subsequently, causing
the reported warning. Fix the problem by using two error variables.
With this change, the selftest still fails as follows:
cyclic deadlock not resolved, ret[7/8] = -35
However, the traceback is gone.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Fixes: d1b42b800e5d0 ("locking/ww_mutex: Add kselftests for resolving ww_mutex cyclic deadlocks")
Link: http://lkml.kernel.org/r/1538516929-9734-1-git-send-email-linux@roeck-us.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Explicitly forbid creating cgroup local storage maps with zero value
size, as it makes no sense and might even cause a panic.
Reported-by: syzbot+18628320d3b14a5c459c@syzkaller.appspotmail.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Automatic NUMA Balancing uses a multi-stage pass to decide whether a page
should migrate to a local node. This filter avoids excessive ping-ponging
if a page is shared or used by threads that migrate cross-node frequently.
Threads inherit both page tables and the preferred node ID from the
parent. This means that threads can trigger hinting faults earlier than
a new task which delays scanning for a number of seconds. As it can be
load balanced very early in its lifetime there can be an unnecessary delay
before it starts migrating thread-local data. This patch migrates private
pages faster early in the lifetime of a thread using the sequence counter
as an identifier of new tasks.
With this patch applied, STREAM performance is the same as 4.17 even though
processes are not spread cross-node prematurely. Other workloads showed
a mix of minor gains and losses. This is somewhat expected most workloads
are not very sensitive to the starting conditions of a process.
4.19.0-rc5 4.19.0-rc5 4.17.0
numab-v1r1 fastmigrate-v1r1 vanilla
MB/sec copy 43298.52 ( 0.00%) 47335.46 ( 9.32%) 47219.24 ( 9.06%)
MB/sec scale 30115.06 ( 0.00%) 32568.12 ( 8.15%) 32527.56 ( 8.01%)
MB/sec add 32825.12 ( 0.00%) 36078.94 ( 9.91%) 35928.02 ( 9.45%)
MB/sec triad 32549.52 ( 0.00%) 35935.94 ( 10.40%) 35969.88 ( 10.51%)
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jirka Hladky <jhladky@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux-MM <linux-mm@kvack.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181001100525.29789-3-mgorman@techsingularity.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
If NUMA improvement from the task migration is going to be very
minimal, then avoid task migration.
Specjbb2005 results (8 warehouses)
Higher bops are better
2 Socket - 2 Node Haswell - X86
JVMS Prev Current %Change
4 198512 205910 3.72673
1 313559 318491 1.57291
2 Socket - 4 Node Power8 - PowerNV
JVMS Prev Current %Change
8 74761.9 74935.9 0.232739
1 214874 226796 5.54837
2 Socket - 2 Node Power9 - PowerNV
JVMS Prev Current %Change
4 180536 189780 5.12031
1 210281 205695 -2.18089
4 Socket - 4 Node Power7 - PowerVM
JVMS Prev Current %Change
8 56511.4 60370 6.828
1 104899 108100 3.05151
1/7 cases is regressing, if we look at events migrate_pages seem
to vary the most especially in the regressing case. Also some
amount of variance is expected between different runs of
Specjbb2005.
Some events stats before and after applying the patch.
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 13,818,546 13,801,554
migrations 1,149,960 1,151,541
faults 385,583 433,246
cache-misses 55,259,546,768 55,168,691,835
sched:sched_move_numa 2,257 2,551
sched:sched_stick_numa 9 24
sched:sched_swap_numa 512 904
migrate:mm_migrate_pages 2,225 1,571
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 72692 113682
numa_hint_faults_local 62270 102163
numa_hit 238762 240181
numa_huge_pte_updates 48 36
numa_interleave 75 64
numa_local 238676 240103
numa_other 86 78
numa_pages_migrated 2225 1564
numa_pte_updates 98557 134080
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 3,173,490 3,079,150
migrations 36,966 31,455
faults 108,776 99,081
cache-misses 12,200,075,320 11,588,126,740
sched:sched_move_numa 1,264 1
sched:sched_stick_numa 0 0
sched:sched_swap_numa 0 0
migrate:mm_migrate_pages 899 36
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 21109 430
numa_hint_faults_local 17120 77
numa_hit 72934 71277
numa_huge_pte_updates 42 0
numa_interleave 33 22
numa_local 72866 71218
numa_other 68 59
numa_pages_migrated 915 23
numa_pte_updates 42326 0
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 8,312,022 8,707,565
migrations 231,705 171,342
faults 310,242 310,820
cache-misses 402,324,573 136,115,400
sched:sched_move_numa 193 215
sched:sched_stick_numa 0 6
sched:sched_swap_numa 3 24
migrate:mm_migrate_pages 93 162
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 11838 8985
numa_hint_faults_local 11216 8154
numa_hit 90689 93819
numa_huge_pte_updates 0 0
numa_interleave 1579 882
numa_local 89634 93496
numa_other 1055 323
numa_pages_migrated 92 169
numa_pte_updates 12109 9217
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 2,170,481 2,152,072
migrations 10,126 10,704
faults 160,962 164,376
cache-misses 10,834,845 3,818,437
sched:sched_move_numa 10 16
sched:sched_stick_numa 0 0
sched:sched_swap_numa 0 7
migrate:mm_migrate_pages 2 199
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 403 2248
numa_hint_faults_local 358 1666
numa_hit 25898 25704
numa_huge_pte_updates 0 0
numa_interleave 207 200
numa_local 25860 25679
numa_other 38 25
numa_pages_migrated 2 197
numa_pte_updates 400 2234
perf stats 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 110,339,633 93,330,595
migrations 4,139,812 4,122,061
faults 863,622 865,979
cache-misses 231,838,045,660 225,395,083,479
sched:sched_move_numa 2,196 2,372
sched:sched_stick_numa 33 24
sched:sched_swap_numa 544 769
migrate:mm_migrate_pages 2,469 1,677
vmstat 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 85748 91638
numa_hint_faults_local 66831 78096
numa_hit 242213 242225
numa_huge_pte_updates 0 0
numa_interleave 0 2
numa_local 242211 242219
numa_other 2 6
numa_pages_migrated 2376 1515
numa_pte_updates 86233 92274
perf stats 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 59,331,057 51,487,271
migrations 552,019 537,170
faults 266,586 256,921
cache-misses 73,796,312,990 70,073,831,187
sched:sched_move_numa 981 576
sched:sched_stick_numa 54 24
sched:sched_swap_numa 286 327
migrate:mm_migrate_pages 713 726
vmstat 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 14807 12000
numa_hint_faults_local 5738 5024
numa_hit 36230 36470
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 36228 36465
numa_other 2 5
numa_pages_migrated 703 726
numa_pte_updates 14742 11930
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jirka Hladky <jhladky@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1537552141-27815-7-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
migrate_task_rq_fair() resets the scan rate for NUMA balancing on every
cross-node migration. In the event of excessive load balancing due to
saturation, this may result in the scan rate being pegged at maximum and
further overloading the machine.
This patch only resets the scan if NUMA balancing is active, a preferred
node has been selected and the task is being migrated from the preferred
node as these are the most harmful. For example, a migration to the preferred
node does not justify a faster scan rate. Similarly, a migration between two
nodes that are not preferred is probably bouncing due to over-saturation of
the machine. In that case, scanning faster and trapping more NUMA faults
will further overload the machine.
Specjbb2005 results (8 warehouses)
Higher bops are better
2 Socket - 2 Node Haswell - X86
JVMS Prev Current %Change
4 203370 205332 0.964744
1 328431 319785 -2.63252
2 Socket - 4 Node Power8 - PowerNV
JVMS Prev Current %Change
1 206070 206585 0.249915
2 Socket - 2 Node Power9 - PowerNV
JVMS Prev Current %Change
4 188386 189162 0.41192
1 201566 213760 6.04963
4 Socket - 4 Node Power7 - PowerVM
JVMS Prev Current %Change
8 59157.4 58736.8 -0.710985
1 105495 105419 -0.0720413
Some events stats before and after applying the patch.
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 13,825,492 14,285,708
migrations 1,152,509 1,180,621
faults 371,948 339,114
cache-misses 55,654,206,041 55,205,631,894
sched:sched_move_numa 1,856 843
sched:sched_stick_numa 4 6
sched:sched_swap_numa 428 219
migrate:mm_migrate_pages 898 365
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 57146 26907
numa_hint_faults_local 51612 24279
numa_hit 238164 239771
numa_huge_pte_updates 16 0
numa_interleave 63 68
numa_local 238085 239688
numa_other 79 83
numa_pages_migrated 883 363
numa_pte_updates 67540 27415
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 3,288,525 3,202,779
migrations 38,652 37,186
faults 111,678 106,076
cache-misses 12,111,197,376 12,024,873,744
sched:sched_move_numa 900 931
sched:sched_stick_numa 0 0
sched:sched_swap_numa 5 1
migrate:mm_migrate_pages 714 637
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 18572 17409
numa_hint_faults_local 14850 14367
numa_hit 73197 73953
numa_huge_pte_updates 11 20
numa_interleave 25 25
numa_local 73138 73892
numa_other 59 61
numa_pages_migrated 712 668
numa_pte_updates 24021 27276
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 8,451,543 8,474,013
migrations 202,804 254,934
faults 310,024 320,506
cache-misses 253,522,507 110,580,458
sched:sched_move_numa 213 725
sched:sched_stick_numa 0 0
sched:sched_swap_numa 2 7
migrate:mm_migrate_pages 88 145
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 11830 22797
numa_hint_faults_local 11301 21539
numa_hit 90038 89308
numa_huge_pte_updates 0 0
numa_interleave 855 865
numa_local 89796 88955
numa_other 242 353
numa_pages_migrated 88 149
numa_pte_updates 12039 22930
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 2,049,153 2,195,628
migrations 11,405 11,179
faults 162,309 149,656
cache-misses 7,203,343 8,117,515
sched:sched_move_numa 22 49
sched:sched_stick_numa 0 0
sched:sched_swap_numa 0 0
migrate:mm_migrate_pages 1 5
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 1693 3577
numa_hint_faults_local 1669 3476
numa_hit 25177 26142
numa_huge_pte_updates 0 0
numa_interleave 194 358
numa_local 24993 26042
numa_other 184 100
numa_pages_migrated 1 5
numa_pte_updates 1577 3587
perf stats 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 94,515,937 100,602,296
migrations 4,203,554 4,135,630
faults 832,697 789,256
cache-misses 226,248,698,331 226,160,621,058
sched:sched_move_numa 1,730 1,366
sched:sched_stick_numa 14 16
sched:sched_swap_numa 432 374
migrate:mm_migrate_pages 1,398 1,350
vmstat 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 80079 47857
numa_hint_faults_local 68620 39768
numa_hit 241187 240165
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 241186 240165
numa_other 1 0
numa_pages_migrated 1347 1224
numa_pte_updates 80729 48354
perf stats 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 63,704,961 58,515,496
migrations 573,404 564,845
faults 230,878 245,807
cache-misses 76,568,222,781 73,603,757,976
sched:sched_move_numa 509 996
sched:sched_stick_numa 31 10
sched:sched_swap_numa 182 193
migrate:mm_migrate_pages 541 646
vmstat 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 8501 13422
numa_hint_faults_local 2960 5619
numa_hit 35526 36118
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 35526 36116
numa_other 0 2
numa_pages_migrated 539 616
numa_pte_updates 8433 13374
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jirka Hladky <jhladky@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1537552141-27815-5-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Currently task scan rate is reset when NUMA balancer migrates the task
to a different node. If NUMA balancer initiates a swap, reset is only
applicable to the task that initiates the swap. Similarly no scan rate
reset is done if the task is migrated across nodes by traditional load
balancer.
Instead move the scan reset to the migrate_task_rq. This ensures the
task moved out of its preferred node, either gets back to its preferred
node quickly or finds a new preferred node. Doing so, would be fair to
all tasks migrating across nodes.
Specjbb2005 results (8 warehouses)
Higher bops are better
2 Socket - 2 Node Haswell - X86
JVMS Prev Current %Change
4 200668 203370 1.3465
1 321791 328431 2.06345
2 Socket - 4 Node Power8 - PowerNV
JVMS Prev Current %Change
1 204848 206070 0.59654
2 Socket - 2 Node Power9 - PowerNV
JVMS Prev Current %Change
4 188098 188386 0.153112
1 200351 201566 0.606436
4 Socket - 4 Node Power7 - PowerVM
JVMS Prev Current %Change
8 58145.9 59157.4 1.73959
1 103798 105495 1.63491
Some events stats before and after applying the patch.
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 13,912,183 13,825,492
migrations 1,155,931 1,152,509
faults 367,139 371,948
cache-misses 54,240,196,814 55,654,206,041
sched:sched_move_numa 1,571 1,856
sched:sched_stick_numa 9 4
sched:sched_swap_numa 463 428
migrate:mm_migrate_pages 703 898
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 50155 57146
numa_hint_faults_local 45264 51612
numa_hit 239652 238164
numa_huge_pte_updates 36 16
numa_interleave 68 63
numa_local 239576 238085
numa_other 76 79
numa_pages_migrated 680 883
numa_pte_updates 71146 67540
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 3,156,720 3,288,525
migrations 30,354 38,652
faults 97,261 111,678
cache-misses 12,400,026,826 12,111,197,376
sched:sched_move_numa 4 900
sched:sched_stick_numa 0 0
sched:sched_swap_numa 1 5
migrate:mm_migrate_pages 20 714
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 272 18572
numa_hint_faults_local 186 14850
numa_hit 71362 73197
numa_huge_pte_updates 0 11
numa_interleave 23 25
numa_local 71299 73138
numa_other 63 59
numa_pages_migrated 2 712
numa_pte_updates 0 24021
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 8,606,824 8,451,543
migrations 155,352 202,804
faults 301,409 310,024
cache-misses 157,759,224 253,522,507
sched:sched_move_numa 168 213
sched:sched_stick_numa 0 0
sched:sched_swap_numa 3 2
migrate:mm_migrate_pages 125 88
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 4650 11830
numa_hint_faults_local 3946 11301
numa_hit 90489 90038
numa_huge_pte_updates 0 0
numa_interleave 892 855
numa_local 90034 89796
numa_other 455 242
numa_pages_migrated 124 88
numa_pte_updates 4818 12039
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 2,113,167 2,049,153
migrations 10,533 11,405
faults 142,727 162,309
cache-misses 5,594,192 7,203,343
sched:sched_move_numa 10 22
sched:sched_stick_numa 0 0
sched:sched_swap_numa 0 0
migrate:mm_migrate_pages 6 1
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 744 1693
numa_hint_faults_local 584 1669
numa_hit 25551 25177
numa_huge_pte_updates 0 0
numa_interleave 263 194
numa_local 25302 24993
numa_other 249 184
numa_pages_migrated 6 1
numa_pte_updates 744 1577
perf stats 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 101,227,352 94,515,937
migrations 4,151,829 4,203,554
faults 745,233 832,697
cache-misses 224,669,561,766 226,248,698,331
sched:sched_move_numa 617 1,730
sched:sched_stick_numa 2 14
sched:sched_swap_numa 187 432
migrate:mm_migrate_pages 316 1,398
vmstat 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 24195 80079
numa_hint_faults_local 21639 68620
numa_hit 238331 241187
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 238331 241186
numa_other 0 1
numa_pages_migrated 204 1347
numa_pte_updates 24561 80729
perf stats 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 62,738,978 63,704,961
migrations 562,702 573,404
faults 228,465 230,878
cache-misses 75,778,067,952 76,568,222,781
sched:sched_move_numa 648 509
sched:sched_stick_numa 13 31
sched:sched_swap_numa 137 182
migrate:mm_migrate_pages 733 541
vmstat 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 10281 8501
numa_hint_faults_local 3242 2960
numa_hit 36338 35526
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 36338 35526
numa_other 0 0
numa_pages_migrated 706 539
numa_pte_updates 10176 8433
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jirka Hladky <jhladky@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1537552141-27815-4-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This additional parameter (new_cpu) is used later for identifying if
task migration is across nodes.
No functional change.
Specjbb2005 results (8 warehouses)
Higher bops are better
2 Socket - 2 Node Haswell - X86
JVMS Prev Current %Change
4 203353 200668 -1.32036
1 328205 321791 -1.95427
2 Socket - 4 Node Power8 - PowerNV
JVMS Prev Current %Change
1 214384 204848 -4.44809
2 Socket - 2 Node Power9 - PowerNV
JVMS Prev Current %Change
4 188553 188098 -0.241311
1 196273 200351 2.07772
4 Socket - 4 Node Power7 - PowerVM
JVMS Prev Current %Change
8 57581.2 58145.9 0.980702
1 103468 103798 0.318939
Brings out the variance between different specjbb2005 runs.
Some events stats before and after applying the patch.
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 13,941,377 13,912,183
migrations 1,157,323 1,155,931
faults 382,175 367,139
cache-misses 54,993,823,500 54,240,196,814
sched:sched_move_numa 2,005 1,571
sched:sched_stick_numa 14 9
sched:sched_swap_numa 529 463
migrate:mm_migrate_pages 1,573 703
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 67099 50155
numa_hint_faults_local 58456 45264
numa_hit 240416 239652
numa_huge_pte_updates 18 36
numa_interleave 65 68
numa_local 240339 239576
numa_other 77 76
numa_pages_migrated 1574 680
numa_pte_updates 77182 71146
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 3,176,453 3,156,720
migrations 30,238 30,354
faults 87,869 97,261
cache-misses 12,544,479,391 12,400,026,826
sched:sched_move_numa 23 4
sched:sched_stick_numa 0 0
sched:sched_swap_numa 6 1
migrate:mm_migrate_pages 10 20
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 236 272
numa_hint_faults_local 201 186
numa_hit 72293 71362
numa_huge_pte_updates 0 0
numa_interleave 26 23
numa_local 72233 71299
numa_other 60 63
numa_pages_migrated 8 2
numa_pte_updates 0 0
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 8,478,820 8,606,824
migrations 171,323 155,352
faults 307,499 301,409
cache-misses 240,353,599 157,759,224
sched:sched_move_numa 214 168
sched:sched_stick_numa 0 0
sched:sched_swap_numa 4 3
migrate:mm_migrate_pages 89 125
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 5301 4650
numa_hint_faults_local 4745 3946
numa_hit 92943 90489
numa_huge_pte_updates 0 0
numa_interleave 899 892
numa_local 92345 90034
numa_other 598 455
numa_pages_migrated 88 124
numa_pte_updates 5505 4818
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 2,066,172 2,113,167
migrations 11,076 10,533
faults 149,544 142,727
cache-misses 10,398,067 5,594,192
sched:sched_move_numa 43 10
sched:sched_stick_numa 0 0
sched:sched_swap_numa 0 0
migrate:mm_migrate_pages 6 6
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 3552 744
numa_hint_faults_local 3347 584
numa_hit 25611 25551
numa_huge_pte_updates 0 0
numa_interleave 213 263
numa_local 25583 25302
numa_other 28 249
numa_pages_migrated 6 6
numa_pte_updates 3535 744
perf stats 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 99,358,136 101,227,352
migrations 4,041,607 4,151,829
faults 749,653 745,233
cache-misses 225,562,543,251 224,669,561,766
sched:sched_move_numa 771 617
sched:sched_stick_numa 14 2
sched:sched_swap_numa 204 187
migrate:mm_migrate_pages 1,180 316
vmstat 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 27409 24195
numa_hint_faults_local 20677 21639
numa_hit 239988 238331
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 239983 238331
numa_other 5 0
numa_pages_migrated 1016 204
numa_pte_updates 27916 24561
perf stats 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 60,899,307 62,738,978
migrations 544,668 562,702
faults 270,834 228,465
cache-misses 74,543,455,635 75,778,067,952
sched:sched_move_numa 735 648
sched:sched_stick_numa 25 13
sched:sched_swap_numa 174 137
migrate:mm_migrate_pages 816 733
vmstat 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 11059 10281
numa_hint_faults_local 4733 3242
numa_hit 41384 36338
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 41383 36338
numa_other 1 0
numa_pages_migrated 815 706
numa_pte_updates 11323 10176
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jirka Hladky <jhladky@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1537552141-27815-3-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Task migration under NUMA balancing can happen in parallel. More than
one task might choose to migrate to the same CPU at the same time. This
can result in:
- During task swap, choosing a task that was not part of the evaluation.
- During task swap, task which just got moved into its preferred node,
moving to a completely different node.
- During task swap, task failing to move to the preferred node, will have
to wait an extra interval for the next migrate opportunity.
- During task movement, multiple task movements can cause load imbalance.
This problem is more likely if there are more cores per node or more
nodes in the system.
Use a per run-queue variable to check if NUMA-balance is active on the
run-queue.
Specjbb2005 results (8 warehouses)
Higher bops are better
2 Socket - 2 Node Haswell - X86
JVMS Prev Current %Change
4 200194 203353 1.57797
1 311331 328205 5.41995
2 Socket - 4 Node Power8 - PowerNV
JVMS Prev Current %Change
1 197654 214384 8.46429
2 Socket - 2 Node Power9 - PowerNV
JVMS Prev Current %Change
4 192605 188553 -2.10379
1 213402 196273 -8.02664
4 Socket - 4 Node Power7 - PowerVM
JVMS Prev Current %Change
8 52227.1 57581.2 10.2516
1 102529 103468 0.915838
There is a regression on power 9 box. If we look at the details,
that box has a sudden jump in cache-misses with this patch.
All other parameters seem to be pointing towards NUMA
consolidation.
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 13,345,784 13,941,377
migrations 1,127,820 1,157,323
faults 374,736 382,175
cache-misses 55,132,054,603 54,993,823,500
sched:sched_move_numa 1,923 2,005
sched:sched_stick_numa 52 14
sched:sched_swap_numa 595 529
migrate:mm_migrate_pages 1,932 1,573
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 60605 67099
numa_hint_faults_local 51804 58456
numa_hit 239945 240416
numa_huge_pte_updates 14 18
numa_interleave 60 65
numa_local 239865 240339
numa_other 80 77
numa_pages_migrated 1931 1574
numa_pte_updates 67823 77182
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 3,016,467 3,176,453
migrations 37,326 30,238
faults 115,342 87,869
cache-misses 11,692,155,554 12,544,479,391
sched:sched_move_numa 965 23
sched:sched_stick_numa 8 0
sched:sched_swap_numa 35 6
migrate:mm_migrate_pages 1,168 10
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 16286 236
numa_hint_faults_local 11863 201
numa_hit 112482 72293
numa_huge_pte_updates 33 0
numa_interleave 20 26
numa_local 112419 72233
numa_other 63 60
numa_pages_migrated 1144 8
numa_pte_updates 32859 0
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 8,629,724 8,478,820
migrations 221,052 171,323
faults 308,661 307,499
cache-misses 135,574,913 240,353,599
sched:sched_move_numa 147 214
sched:sched_stick_numa 0 0
sched:sched_swap_numa 2 4
migrate:mm_migrate_pages 64 89
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 11481 5301
numa_hint_faults_local 10968 4745
numa_hit 89773 92943
numa_huge_pte_updates 0 0
numa_interleave 1116 899
numa_local 89220 92345
numa_other 553 598
numa_pages_migrated 62 88
numa_pte_updates 11694 5505
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 2,272,887 2,066,172
migrations 12,206 11,076
faults 163,704 149,544
cache-misses 4,801,186 10,398,067
sched:sched_move_numa 44 43
sched:sched_stick_numa 0 0
sched:sched_swap_numa 0 0
migrate:mm_migrate_pages 17 6
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 2261 3552
numa_hint_faults_local 1993 3347
numa_hit 25726 25611
numa_huge_pte_updates 0 0
numa_interleave 239 213
numa_local 25498 25583
numa_other 228 28
numa_pages_migrated 17 6
numa_pte_updates 2266 3535
perf stats 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 117,980,962 99,358,136
migrations 3,950,220 4,041,607
faults 736,979 749,653
cache-misses 224,976,072,879 225,562,543,251
sched:sched_move_numa 504 771
sched:sched_stick_numa 50 14
sched:sched_swap_numa 239 204
migrate:mm_migrate_pages 1,260 1,180
vmstat 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 18293 27409
numa_hint_faults_local 11969 20677
numa_hit 240854 239988
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 240851 239983
numa_other 3 5
numa_pages_migrated 1190 1016
numa_pte_updates 18106 27916
perf stats 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 61,053,158 60,899,307
migrations 551,586 544,668
faults 244,174 270,834
cache-misses 74,326,766,973 74,543,455,635
sched:sched_move_numa 344 735
sched:sched_stick_numa 24 25
sched:sched_swap_numa 140 174
migrate:mm_migrate_pages 568 816
vmstat 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 6461 11059
numa_hint_faults_local 2283 4733
numa_hit 35661 41384
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 35661 41383
numa_other 0 1
numa_pages_migrated 568 815
numa_pte_updates 6518 11323
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Jirka Hladky <jhladky@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1537552141-27815-2-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Some of the scheduling tracepoints allow the perf_tp_event
code to write to ring buffer under different cpu than the
code is running on.
This results in corrupted ring buffer data demonstrated in
following perf commands:
# perf record -e 'sched:sched_switch,sched:sched_wakeup' perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.383 [sec]
[ perf record: Woken up 8 times to write data ]
0x42b890 [0]: failed to process type: -1765585640
[ perf record: Captured and wrote 4.825 MB perf.data (29669 samples) ]
# perf report --stdio
0x42b890 [0]: failed to process type: -1765585640
The reason for the corruption are some of the scheduling tracepoints,
that have __perf_task dfined and thus allow to store data to another
cpu ring buffer:
sched_waking
sched_wakeup
sched_wakeup_new
sched_stat_wait
sched_stat_sleep
sched_stat_iowait
sched_stat_blocked
The perf_tp_event function first store samples for current cpu
related events defined for tracepoint:
hlist_for_each_entry_rcu(event, head, hlist_entry)
perf_swevent_event(event, count, &data, regs);
And then iterates events of the 'task' and store the sample
for any task's event that passes tracepoint checks:
ctx = rcu_dereference(task->perf_event_ctxp[perf_sw_context]);
list_for_each_entry_rcu(event, &ctx->event_list, event_entry) {
if (event->attr.type != PERF_TYPE_TRACEPOINT)
continue;
if (event->attr.config != entry->type)
continue;
perf_swevent_event(event, count, &data, regs);
}
Above code can race with same code running on another cpu,
ending up with 2 cpus trying to store under the same ring
buffer, which is specifically not allowed.
This patch prevents the problem, by allowing only events with the same
current cpu to receive the event.
NOTE: this requires the use of (per-task-)per-cpu buffers for this
feature to work; perf-record does this.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
[peterz: small edits to Changelog]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: e6dab5ffab59 ("perf/trace: Add ability to set a target task for events")
Link: http://lkml.kernel.org/r/20180923161343.GB15054@krava
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
