| Age | Commit message (Collapse) | Author |
|---|
|
This is a port of commit #82e78d80 from TREE_PREEMPT_RCU to
TINY_PREEMPT_RCU.
This commit uses the fact that current->rcu_boost_mutex is set
any time that the RCU_READ_UNLOCK_BOOSTED flag is set in the
current->rcu_read_unlock_special bitmask. This allows tests of
the bit to be changed to tests of the pointer, which in turn allows
the RCU_READ_UNLOCK_BOOSTED flag to be eliminated.
Please note that the check of current->rcu_read_unlock_special need not
change because any time that RCU_READ_UNLOCK_BOOSTED was set, so was
RCU_READ_UNLOCK_BLOCKED. Therefore, __rcu_read_unlock() can continue
testing current->rcu_read_unlock_special for non-zero, as before.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This is a port to TINY_RCU of Peter Zijlstra's commit #ec433f0c5
The rcu_read_unlock_special() function relies on in_irq() to exclude
scheduler activity from interrupt level. This fails because exit_irq()
can invoke the scheduler after clearing the preempt_count() bits that
in_irq() uses to determine that it is at interrupt level. This situation
can result in failures as follows:
$task IRQ SoftIRQ
rcu_read_lock()
/* do stuff */
<preempt> |= UNLOCK_BLOCKED
rcu_read_unlock()
--t->rcu_read_lock_nesting
irq_enter();
/* do stuff, don't use RCU */
irq_exit();
sub_preempt_count(IRQ_EXIT_OFFSET);
invoke_softirq()
ttwu();
spin_lock_irq(&pi->lock)
rcu_read_lock();
/* do stuff */
rcu_read_unlock();
rcu_read_unlock_special()
rcu_report_exp_rnp()
ttwu()
spin_lock_irq(&pi->lock) /* deadlock */
rcu_read_unlock_special(t);
This can be triggered 'easily' because invoke_softirq() immediately does
a ttwu() of ksoftirqd/# instead of doing the in-place softirq stuff first,
but even without that the above happens.
Cure this by also excluding softirqs from the rcu_read_unlock_special()
handler and ensuring the force_irqthreads ksoftirqd/# wakeup is done
from full softirq context.
It is also necessary to delay the ->rcu_read_lock_nesting decrement until
after rcu_read_unlock_special(). This delay is handled by the commit
"Protect __rcu_read_unlock() against scheduler-using irq handlers".
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This is a port of commit #b0d3041 from TREE_RCU to TREE_PREEMPT_RCU.
Under some rare but real combinations of configuration parameters, RCU
callbacks are posted during early boot that use kernel facilities that are
not yet initialized. Therefore, when these callbacks are invoked, hard
hangs and crashes ensue. This commit therefore prevents RCU callbacks
from being invoked until after the scheduler is fully up and running,
as in after multiple tasks have been spawned.
It might well turn out that a better approach is to identify the specific
RCU callbacks that are causing this problem, but that discussion will
wait until such time as someone really needs an RCU callback to be invoked
(as opposed to merely registered) during early boot.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This is a port of commit #be0e1e21 to TINY_PREEMPT_RCU. This uses
noinline to prevent rcu_read_unlock_special() from being inlined into
__rcu_read_unlock().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This commit ports commit #10f39bb1b2 (rcu: protect __rcu_read_unlock()
against scheduler-using irq handlers) from TREE_PREEMPT_RCU to
TINY_PREEMPT_RCU. The following is a corresponding port of that
commit message.
The addition of RCU read-side critical sections within runqueue and
priority-inheritance critical sections introduced some deadlocks,
for example, involving interrupts from __rcu_read_unlock() where the
interrupt handlers call wake_up(). This situation can cause the
instance of __rcu_read_unlock() invoked from interrupt to do some
of the processing that would otherwise have been carried out by the
task-level instance of __rcu_read_unlock(). When the interrupt-level
instance of __rcu_read_unlock() is called with a scheduler lock held from
interrupt-entry/exit situations where in_irq() returns false, deadlock can
result. Of course, in a UP kernel, there are not really any deadlocks,
but the upper-level critical section can still be be fatally confused
by the lower-level critical section changing things out from under it.
This commit resolves these deadlocks by using negative values of the
per-task ->rcu_read_lock_nesting counter to indicate that an instance of
__rcu_read_unlock() is in flight, which in turn prevents instances from
interrupt handlers from doing any special processing. Note that nested
rcu_read_lock()/rcu_read_unlock() pairs are still permitted, but they will
never see ->rcu_read_lock_nesting go to zero, and will therefore never
invoke rcu_read_unlock_special(), thus preventing them from seeing the
RCU_READ_UNLOCK_BLOCKED bit should it be set in ->rcu_read_unlock_special.
This patch also adds a check for ->rcu_read_unlock_special being negative
in rcu_check_callbacks(), thus preventing the RCU_READ_UNLOCK_NEED_QS
bit from being set should a scheduling-clock interrupt occur while
__rcu_read_unlock() is exiting from an outermost RCU read-side critical
section.
Of course, __rcu_read_unlock() can be preempted during the time that
->rcu_read_lock_nesting is negative. This could result in the setting
of the RCU_READ_UNLOCK_BLOCKED bit after __rcu_read_unlock() checks it,
and would also result it this task being queued on the corresponding
rcu_node structure's blkd_tasks list. Therefore, some later RCU read-side
critical section would enter rcu_read_unlock_special() to clean up --
which could result in deadlock (OK, OK, fatal confusion) if that RCU
read-side critical section happened to be in the scheduler where the
runqueue or priority-inheritance locks were held.
To prevent the possibility of fatal confusion that might result from
preemption during the time that ->rcu_read_lock_nesting is negative,
this commit also makes rcu_preempt_note_context_switch() check for
negative ->rcu_read_lock_nesting, thus refraining from queuing the task
(and from setting RCU_READ_UNLOCK_BLOCKED) if we are already exiting
from the outermost RCU read-side critical section (in other words,
we really are no longer actually in that RCU read-side critical
section). In addition, rcu_preempt_note_context_switch() invokes
rcu_read_unlock_special() to carry out the cleanup in this case, which
clears out the ->rcu_read_unlock_special bits and dequeues the task
(if necessary), in turn avoiding needless delay of the current RCU grace
period and needless RCU priority boosting.
It is still illegal to call rcu_read_unlock() while holding a scheduler
lock if the prior RCU read-side critical section has ever had both
preemption and irqs enabled. However, the common use case is legal,
namely where then entire RCU read-side critical section executes with
irqs disabled, for example, when the scheduler lock is held across the
entire lifetime of the RCU read-side critical section.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The grace-period initialization sequence in rcu_start_gp() has a special
case for systems where the rcu_node tree is a single rcu_node structure.
This made sense some years ago when systems were smaller and up to 64
CPUs could share a single rcu_node structure, but now that large systems
are common and a given leaf rcu_node structure can support only 16 CPUs
(due to lock contention on the rcu_node's ->lock field), this optimization
is almost never taken. And even the small mobile platforms that might
make use of it might rather have the kernel text reduction.
Therefore, this commit removes the check for single-rcu_node trees.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
RCU's current CPU-offline code path dumps all of the outgoing CPU's
callbacks onto the RCU_NEXT_TAIL portion of the surviving CPU's
callback list. This means that all the ready-to-invoke callbacks from
the outgoing CPU must wait for another full RCU grace period. This was
just fine when CPU-hotplug events were rare, but there is increasing
evidence that users are planning to make increasing use of CPU hotplug.
Therefore, this commit changes the callback-dumping procedure so that
callbacks that are ready to invoke are moved to the RCU_DONE_TAIL
portion of the surviving CPU's callback list. This avoids running
these callbacks through a second unnecessary grace period.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Because quiescent states are now reported from offline CPUs in
CPU_DYING state, there is some possibility that such a CPU might
note the end of a grace period and attempt to start invoking
callbacks. This would be a very bad thing, and is supposed to
be prevented by the fact that the CPU_DYING CPU gets rid of all
its callbacks before reporting the quiescent state. However,
there is other CPU-offline code in the kernel, and it is quite
possible that someone will invoke RCU core processing from that
code. Therefore, this commit adds a warning for this case.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Currently, a given CPU is permitted to remain in dyntick-idle mode
indefinitely if it has only lazy RCU callbacks queued. This is vulnerable
to corner cases in NUMA systems, so limit the time to six seconds by
default. (Currently controlled by a cpp macro.)
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Make rcutorture check for CPU-hotplug failures and complain if there
were any.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Move ->qsmaskinit and blkd_tasks[] manipulation to the CPU_DYING
notifier. This simplifies the code by eliminating a potential
deadlock and by reducing the responsibilities of force_quiescent_state().
Also rename functions to make their connection to the CPU-hotplug
stages explicit.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
When CONFIG_RCU_FAST_NO_HZ is enabled, RCU will allow a given CPU to
enter dyntick-idle mode even if it still has RCU callbacks queued.
RCU avoids system hangs in this case by scheduling a timer for several
jiffies in the future. However, if all of the callbacks on that CPU
are from kfree_rcu(), there is no reason to wake the CPU up, as it is
not a problem to defer freeing of memory.
This commit therefore tracks the number of callbacks on a given CPU
that are from kfree_rcu(), and avoids scheduling the timer if all of
a given CPU's callbacks are from kfree_rcu().
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The push for energy efficiency will require that RCU tag rcu_head
structures to indicate whether or not their invocation is time critical.
This tagging is best carried out in the bottom bits of the ->next
pointers in the rcu_head structures. This tagging requires that the
rcu_head structures be properly aligned, so this commit adds the required
diagnostics.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
It is illegal to have a grace period within a same-flavor RCU read-side
critical section, so this commit adds lockdep-RCU checks to splat when
such abuse is encountered. This commit does not detect more elaborate
RCU deadlock situations. These situations might be a job for lockdep
enhancements.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Adding support to filter function trace event via perf
interface. It is now possible to use filter interface
in the perf tool like:
perf record -e ftrace:function --filter="(ip == mm_*)" ls
The filter syntax is restricted to the the 'ip' field only,
and following operators are accepted '==' '!=' '||', ending
up with the filter strings like:
ip == f1[, ]f2 ... || ip != f3[, ]f4 ...
with comma ',' or space ' ' as a function separator. If the
space ' ' is used as a separator, the right side of the
assignment needs to be enclosed in double quotes '"', e.g.:
perf record -e ftrace:function --filter '(ip == do_execve,sys_*,ext*)' ls
perf record -e ftrace:function --filter '(ip == "do_execve,sys_*,ext*")' ls
perf record -e ftrace:function --filter '(ip == "do_execve sys_* ext*")' ls
The '==' operator adds trace filter with same effect as would
be added via set_ftrace_filter file.
The '!=' operator adds trace filter with same effect as would
be added via set_ftrace_notrace file.
The right side of the '!=', '==' operators is list of functions
or regexp. to be added to filter separated by space.
The '||' operator is used for connecting multiple filter definitions
together. It is possible to have more than one '==' and '!='
operators within one filter string.
Link: http://lkml.kernel.org/r/1329317514-8131-8-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Adding FILTER_TRACE_FN event field type for function tracepoint
event, so it can be properly recognized within filtering code.
Currently all fields of ftrace subsystem events share the common
field type FILTER_OTHER. Since the function trace fields need
special care within the filtering code we need to recognize it
properly, hence adding the FILTER_TRACE_FN event type.
Adding filter parameter to the FTRACE_ENTRY macro, to specify the
filter field type for the event.
Link: http://lkml.kernel.org/r/1329317514-8131-7-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Adding perf registration support for the ftrace function event,
so it is now possible to register it via perf interface.
The perf_event struct statically contains ftrace_ops as a handle
for function tracer. The function tracer is registered/unregistered
in open/close actions.
To be efficient, we enable/disable ftrace_ops each time the traced
process is scheduled in/out (via TRACE_REG_PERF_(ADD|DELL) handlers).
This way tracing is enabled only when the process is running.
Intentionally using this way instead of the event's hw state
PERF_HES_STOPPED, which would not disable the ftrace_ops.
It is now possible to use function trace within perf commands
like:
perf record -e ftrace:function ls
perf stat -e ftrace:function ls
Allowed only for root.
Link: http://lkml.kernel.org/r/1329317514-8131-6-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Adding FTRACE_ENTRY_REG macro so particular ftrace entries
could specify registration function and thus become accesible
via perf.
This will be used in upcomming patch for function trace.
Link: http://lkml.kernel.org/r/1329317514-8131-5-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Adding TRACE_REG_PERF_ADD and TRACE_REG_PERF_DEL to handle
perf event schedule in/out actions.
The add action is invoked for when the perf event is scheduled in,
while the del action is invoked when the event is scheduled out.
Link: http://lkml.kernel.org/r/1329317514-8131-4-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Adding TRACE_REG_PERF_OPEN and TRACE_REG_PERF_CLOSE to differentiate
register/unregister from open/close actions.
The register/unregister actions are invoked for the first/last
tracepoint user when opening/closing the event.
The open/close actions are invoked for each tracepoint user when
opening/closing the event.
Link: http://lkml.kernel.org/r/1329317514-8131-3-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Adding a way to temporarily enable/disable ftrace_ops. The change
follows the same way as 'global' ftrace_ops are done.
Introducing 2 global ftrace_ops - control_ops and ftrace_control_list
which take over all ftrace_ops registered with FTRACE_OPS_FL_CONTROL
flag. In addition new per cpu flag called 'disabled' is also added to
ftrace_ops to provide the control information for each cpu.
When ftrace_ops with FTRACE_OPS_FL_CONTROL is registered, it is
set as disabled for all cpus.
The ftrace_control_list contains all the registered 'control' ftrace_ops.
The control_ops provides function which iterates ftrace_control_list
and does the check for 'disabled' flag on current cpu.
Adding 3 inline functions:
ftrace_function_local_disable/ftrace_function_local_enable
- enable/disable the ftrace_ops on current cpu
ftrace_function_local_disabled
- get disabled ftrace_ops::disabled value for current cpu
Link: http://lkml.kernel.org/r/1329317514-8131-2-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
If more than one __print_*() function is used in a tracepoint
(__print_flags(), __print_symbols(), etc), then the temp seq buffer will
not be zero on entry. Using the temp seq buffer's length to know if
data has been printed or not in the current function is incorrect and
may produce incorrect results.
Currently, no in-tree tracepoint causes this bug, but new ones may
be created.
Cc: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
If __print_flags() is used after another __print_*() function, the
temp seq_file buffer will not be empty on entry, and the delimiter will
be printed even though there's just one field. We get something like:
|S
instead of just:
S
This is because the length of the temp seq buffer is used to determine
if the delimiter is printed or not. But this algorithm fails when
the seq buffer is not empty on entry, and the delimiter will be printed
because it thinks that a previous field was already printed.
Link: http://lkml.kernel.org/r/1329650167-480655-1-git-send-email-avagin@openvz.org
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Assorted fixes, sat in -next for a week or so...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ocfs2: deal with wraparounds of i_nlink in ocfs2_rename()
vfs: fix compat_sys_stat() handling of overflows in st_nlink
quota: Fix deadlock with suspend and quotas
vfs: Provide function to get superblock and wait for it to thaw
vfs: fix panic in __d_lookup() with high dentry hashtable counts
autofs4 - fix lockdep splat in autofs
vfs: fix d_inode_lookup() dentry ref leak
|
|
Add helper functions to read and write struct timeval and struct
timespec from userspace. We already had helper functions for reading
and writing struct compat_timespec; add a set of functions to do the
same with struct timeval, and add a second suite of functions which
can be sensitive to COMPAT_USE_64BIT_TIME and access either 32- or
64-bit time structures.
This also exports these helper functions to modules.
Rename the existing inlines for converting between struct
compat_timeval and native struct timespec so we can have a saner
naming convention for the exported functions.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Replace the fd_sets in struct fdtable with an array of unsigned longs and then
use the standard non-atomic bit operations rather than the FD_* macros.
This:
(1) Removes the abuses of struct fd_set:
(a) Since we don't want to allocate a full fd_set the vast majority of the
time, we actually, in effect, just allocate a just-big-enough array of
unsigned longs and cast it to an fd_set type - so why bother with the
fd_set at all?
(b) Some places outside of the core fdtable handling code (such as
SELinux) want to look inside the array of unsigned longs hidden inside
the fd_set struct for more efficient iteration over the entire set.
(2) Eliminates the use of FD_*() macros in the kernel completely.
(3) Permits the __FD_*() macros to be deleted entirely where not exposed to
userspace.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: http://lkml.kernel.org/r/20120216174954.23314.48147.stgit@warthog.procyon.org.uk
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
|
|
Print physical address info in a style consistent with the %pR style used
elsewhere in the kernel.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
Since suspend_stats_update() is only called from pm_suspend(),
move its code directly into that function and remove the static
inline definition from include/linux/suspend.h. Clean_up
pm_suspend() in the process.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
|
|
The enter_state() function in kernel/power/suspend.c should be
static and state_store() in kernel/power/suspend.c should call
pm_suspend() instead of it, so make that happen (which also reduces
code duplication related to suspend statistics).
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
|
|
The kerneldoc comments in kernel/power/suspend.c are not formatted
in the same way and the quality of some of them is questionable.
Unify the formatting and improve the contents.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/core
|
|
Make irq_domain_ops pointer a constant to make it safer for multiple
instances to share the same ops pointer and change the irq_domain code
so that it does not modify the ops.
v4: Fix mismatched type reference in powerpc code
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: Olof Johansson <olof@lixom.net>
|
|
Rather than having each interrupt controller driver creating its own barely
unique .xlate function for irq_domain, create a library of translators which
any driver can use directly.
v5: - Remove irq_domain_xlate_pci(). It was incorrect.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: Olof Johansson <olof@lixom.net>
|
|
irq_domain_add_simple() was a stop-gap measure until complete irq_domain
support was complete. This patch removes the irq_domain_add_simple()
interface.
This patch also drops the explicit irq_domain initialization performed
by the mach-versatile code because the versatile interrupt controller
already has irq_domain support built into it. This was a bug that was
hanging around quietly for a while, but with the full irq_domain which
actually verifies that irq_domain ranges are available it would cause
the registration to fail and the system wouldn't boot.
v4: Fixed number of irqs in mx5 gpio code
v2: Updated to pass in host_data pointer on irq_domain allocation.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Cc: Russell King <linux@arm.linux.org.uk>
Tested-by: Olof Johansson <olof@lixom.net>
|
|
This patch removes the simplistic implementation of irq_domains and enables
the powerpc infrastructure for all irq_domain users. The powerpc
infrastructure includes support for complex mappings between Linux and
hardware irq numbers, and can manage allocation of irq_descs.
This patch also converts the few users of irq_domain_add()/irq_domain_del()
to call irq_domain_add_legacy() instead.
v3: Fix bug that set up too many irqs in translation range.
v2: Fix removal of irq_alloc_descs() call in gic driver
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: Olof Johansson <olof@lixom.net>
|
|
Add support for a legacy mapping where irq = (hwirq - first_hwirq + first_irq)
so that a controller driver can allocate a fixed range of irq_descs and use
a simple calculation to translate back and forth between linux and hw irq
numbers. This is needed to use an irq_domain with many of the ARM interrupt
controller drivers that manage their own irq_desc allocations. Ultimately
the goal is to migrate those drivers to use the linear revmap, but doing it
this way allows each driver to be converted separately which makes the
migration path easier.
This patch generalizes the IRQ_DOMAIN_MAP_LEGACY method to use
(first_irq-first_hwirq) as the offset between hwirq and linux irq number,
and adds checks to make sure that the hwirq number does not exceed range
assigned to the controller.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: Olof Johansson <olof@lixom.net>
|
|
Each revmap type has different arguments for setting up the revmap.
This patch splits up the generator functions so that each revmap type
can do its own setup and the user doesn't need to keep track of how
each revmap type handles the arguments.
This patch also adds a host_data argument to the generators. There are
cases where the host_data pointer will be needed before the function returns.
ie. the legacy map calls the .map callback for each irq before returning.
v2: - Add void *host_data argument to irq_domain_add_*() functions
- fixed failure to compile
- Moved IRQ_DOMAIN_MAP_* defines into irqdomain.c
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: Olof Johansson <olof@lixom.net>
|
|
No functional changes. Replaces non-exported references to 'host' with domain.
Does not change any symbol names referenced by other .c files.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: Olof Johansson <olof@lixom.net>
|
|
zero always means no irq when using irq domains. Get rid of the NO_IRQ
references.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: Olof Johansson <olof@lixom.net>
|
|
This patch only moves the code. It doesn't make any changes, and the
code is still only compiled for powerpc. Follow-on patches will generalize
the code for other architectures.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: Olof Johansson <olof@lixom.net>
|
|
into timers/core
|
|
idle_cpu() is called on irq entry to guess if we need to call
tick_check_idle(). This way we can catch up with jiffies if the tick
was stopped, stop accounting idle time during the interrupt and
maintain the sched clock if it is unstable.
But if we are going to exit the idle loop to schedule a new task (ie:
if we have a task in the runqueue or a remotely enqueued ttwu to
perform), the idle_cpu() check will return 0 such that we miss the
call to tick_check_idle() for all interrupts happening before we
schedule the new task.
As a result these interrupts and the softirqs coming along may deal
with stale jiffies values, bad sched clock values, and won't substract
their time from the idle time accounting.
Fix this with using is_idle_task() instead that strictly checks that
we are running the idle task, without caring about the fact we are
going to schedule a task soon.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/1327427984-23282-3-git-send-email-fweisbec@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
ts->inidle is set by tick_nohz_idle_enter() and unset by
tick_nohz_idle_exit(). However these two calls are assumed
to be always paired. This means that by the time we call
tick_nohz_idle_exit(), ts->inidle is supposed to be always
set to 1.
Remove the checks for ts->inidle in tick_nohz_idle_exit().
This simplifies a bit the code and improves its debuggability
(ie: ensure the call is paired with a tick_nohz_idle_enter()
call).
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Yong Zhang <yong.zhang0@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/1327427984-23282-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
There is no reason to call update_ts_time_stat from tick_nohz_start_idle
anymore (after e0e37c20 sched: Eliminate the ts->idle_lastupdate field)
when we updated idle_lastupdate unconditionally.
We haven't set idle_active yet and do not provide last_update_time so
the whole call end up being just 2 wasted branches.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Link: http://lkml.kernel.org/r/1322755222-6951-1-git-send-email-mhocko@suse.cz
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Platforms with Always Running APIC Timer doesn't use the broadcast timer
but the kernel is leaving the broadcast timer (HPET in this case)
in oneshot mode.
On these platforms, before the switch to oneshot mode, broadcast device is
actually in shutdown mode. Code checks for empty tick_broadcast_mask and
avoids going into the periodic mode.
During switch to oneshot mode, add the same tick_broadcast_mask checks in the
tick_broadcast_switch_to_oneshot() and avoid the broadcast device going into
the oneshot mode.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: john stultz <johnstul@us.ibm.com>
Cc: venki@google.com
Link: http://lkml.kernel.org/r/1320452301.15071.16.camel@sbsiddha-desk.sc.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
No need to assign ret in each case and break. Simply return the result
of the handler function directly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <dvhart@linux.intel.com>
|
|
Some of the newer futex PI opcodes do not check the cmpxchg enabled
variable and call unconditionally into the handling functions. Cover
all PI opcodes in a separate check.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <dvhart@linux.intel.com>
|
|
An interrupt might be pending when irq_startup() is called, but the
startup code does not invoke the resend logic. In some cases this
prevents the device from issuing another interrupt which renders the
device non functional.
Call the resend function in irq_startup() to keep things going.
Reported-and-tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
When the primary handler of an interrupt which is marked IRQ_ONESHOT
returns IRQ_HANDLED or IRQ_NONE, then the interrupt thread is not
woken and the unmask logic of the interrupt line is never
invoked. This keeps the interrupt masked forever.
This was not noticed as most IRQ_ONESHOT users wake the thread
unconditionally (usually because they cannot access the underlying
device from hard interrupt context). Though this behaviour was nowhere
documented and not necessarily intentional. Some drivers can avoid the
thread wakeup in certain cases and run into the situation where the
interrupt line s kept masked.
Handle it gracefully.
Reported-and-tested-by: Lothar Wassmann <lw@karo-electronics.de>
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Part of the series to unify the irq remapping mechanisms in the
kernel. A follow up patch will copy the powerpc implementation into
kernel/irq/irqdomain.c, which will be a lot easier if the structures
are identical.
Where they differ, I've chose to use the powerpc names since there is
a lot more code using those names.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: Olof Johansson <olof@lixom.net>
|
