| Age | Commit message (Collapse) | Author |
|---|
|
commit 36569780b0d64de283f9d6c2195fd1a43e221ee8 upstream.
The commit e6fe3f422be1 ("sched: Make multiple runqueue task counters
32-bit") changed nr_uninterruptible to an unsigned int. But the
nr_uninterruptible values for each of the CPU runqueues can grow to
large numbers, sometimes exceeding INT_MAX. This is valid, if, over
time, a large number of tasks are migrated off of one CPU after going
into an uninterruptible state. Only the sum of all nr_interruptible
values across all CPUs yields the correct result, as explained in a
comment in kernel/sched/loadavg.c.
Change the type of nr_uninterruptible back to unsigned long to prevent
overflows, and thus the miscalculation of load average.
Fixes: e6fe3f422be1 ("sched: Make multiple runqueue task counters 32-bit")
Signed-off-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250709173328.606794-1-aruna.ramakrishna@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fc975cfb36393db1db517fbbe366e550bcdcff14 ]
In our testing with 6.12 based kernel on a big.LITTLE system, we were
seeing instances of RT tasks being blocked from running on the LITTLE
cpus for multiple seconds of time, apparently by the dl_server. This
far exceeds the default configured 50ms per second runtime.
This is due to the fair dl_server runtime calculation being scaled
for frequency & capacity of the cpu.
Consider the following case under a Big.LITTLE architecture:
Assume the runtime is: 50,000,000 ns, and Frequency/capacity
scale-invariance defined as below:
Frequency scale-invariance: 100
Capacity scale-invariance: 50
First by Frequency scale-invariance,
the runtime is scaled to 50,000,000 * 100 >> 10 = 4,882,812
Then by capacity scale-invariance,
it is further scaled to 4,882,812 * 50 >> 10 = 238,418.
So it will scaled to 238,418 ns.
This smaller "accounted runtime" value is what ends up being
subtracted against the fair-server's runtime for the current period.
Thus after 50ms of real time, we've only accounted ~238us against the
fair servers runtime. This 209:1 ratio in this example means that on
the smaller cpu the fair server is allowed to continue running,
blocking RT tasks, for over 10 seconds before it exhausts its supposed
50ms of runtime. And on other hardware configurations it can be even
worse.
For the fair deadline_server, to prevent realtime tasks from being
unexpectedly delayed, we really do want to use fixed time, and not
scaled time for smaller capacity/frequency cpus. So remove the scaling
from the fair server's accounting to fix this.
Fixes: a110a81c52a9 ("sched/deadline: Deferrable dl server")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: John Stultz <jstultz@google.com>
Signed-off-by: kuyo chang <kuyo.chang@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: John Stultz <jstultz@google.com>
Tested-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20250702021440.2594736-1-kuyo.chang@mediatek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 009836b4fa52f92cba33618e773b1094affa8cd2 ]
On Mon, Jun 02, 2025 at 03:22:13PM +0800, Kuyo Chang wrote:
> So, the potential race scenario is:
>
> CPU0 CPU1
> // doing migrate_swap(cpu0/cpu1)
> stop_two_cpus()
> ...
> // doing _cpu_down()
> sched_cpu_deactivate()
> set_cpu_active(cpu, false);
> balance_push_set(cpu, true);
> cpu_stop_queue_two_works
> __cpu_stop_queue_work(stopper1,...);
> __cpu_stop_queue_work(stopper2,..);
> stop_cpus_in_progress -> true
> preempt_enable();
> ...
> 1st balance_push
> stop_one_cpu_nowait
> cpu_stop_queue_work
> __cpu_stop_queue_work
> list_add_tail -> 1st add push_work
> wake_up_q(&wakeq); -> "wakeq is empty.
> This implies that the stopper is at wakeq@migrate_swap."
> preempt_disable
> wake_up_q(&wakeq);
> wake_up_process // wakeup migrate/0
> try_to_wake_up
> ttwu_queue
> ttwu_queue_cond ->meet below case
> if (cpu == smp_processor_id())
> return false;
> ttwu_do_activate
> //migrate/0 wakeup done
> wake_up_process // wakeup migrate/1
> try_to_wake_up
> ttwu_queue
> ttwu_queue_cond
> ttwu_queue_wakelist
> __ttwu_queue_wakelist
> __smp_call_single_queue
> preempt_enable();
>
> 2nd balance_push
> stop_one_cpu_nowait
> cpu_stop_queue_work
> __cpu_stop_queue_work
> list_add_tail -> 2nd add push_work, so the double list add is detected
> ...
> ...
> cpu1 get ipi, do sched_ttwu_pending, wakeup migrate/1
>
So this balance_push() is part of schedule(), and schedule() is supposed
to switch to stopper task, but because of this race condition, stopper
task is stuck in WAKING state and not actually visible to be picked.
Therefore CPU1 can do another schedule() and end up doing another
balance_push() even though the last one hasn't been done yet.
This is a confluence of fail, where both wake_q and ttwu_wakelist can
cause crucial wakeups to be delayed, resulting in the malfunction of
balance_push.
Since there is only a single stopper thread to be woken, the wake_q
doesn't really add anything here, and can be removed in favour of
direct wakeups of the stopper thread.
Then add a clause to ttwu_queue_cond() to ensure the stopper threads
are never queued / delayed.
Of all 3 moving parts, the last addition was the balance_push()
machinery, so pick that as the point the bug was introduced.
Fixes: 2558aacff858 ("sched/hotplug: Ensure only per-cpu kthreads run during hotplug")
Reported-by: Kuyo Chang <kuyo.chang@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Kuyo Chang <kuyo.chang@mediatek.com>
Link: https://lkml.kernel.org/r/20250605100009.GO39944@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c50784e99f0e7199cdb12dbddf02229b102744ef ]
Otherwise, tg->scx.weight can go out of sync while scx_cgroup is not enabled
and ops.cgroup_init() may be called with a stale weight value.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 819513666966 ("sched_ext: Add cgroup support")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit aa3ee4f0b7541382c9f6f43f7408d73a5d4f4042 ]
Delayed dequeued feature keeps a sleeping task enqueued until its
lag has elapsed. As a result, it stays also visible in rq->nr_running.
So when in wake_affine_idle(), we should use the real running-tasks
in rq to check whether we should place the wake-up task to
current cpu.
On the other hand, add a helper function to return the nr-delayed.
Fixes: 152e11f6df29 ("sched/fair: Implement delayed dequeue")
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Reviewed-and-tested-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250303105241.17251-2-xuewen.yan@unisoc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c2a295bffeaf9461ecba76dc9e4780c898c94f03 ]
With delayed dequeued feature, a sleeping sched_entity remains queued in
the rq until its lag has elapsed. As a result, it stays also visible
in the statistics that are used to balance the system and in particular
the field cfs.h_nr_queued when the sched_entity is associated to a task.
Create a new h_nr_runnable that tracks only queued and runnable tasks.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20241202174606.4074512-5-vincent.guittot@linaro.org
Stable-dep-of: aa3ee4f0b754 ("sched/fair: Fixup wake_up_sync() vs DELAYED_DEQUEUE")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7b8a702d943827130cc00ae36075eff5500f86f1 ]
With delayed dequeued feature, a sleeping sched_entity remains queued
in the rq until its lag has elapsed but can't run.
Rename h_nr_running into h_nr_queued to reflect this new behavior.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20241202174606.4074512-4-vincent.guittot@linaro.org
Stable-dep-of: aa3ee4f0b754 ("sched/fair: Fixup wake_up_sync() vs DELAYED_DEQUEUE")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
sched_create_group()
commit 33796b91871ad4010c8188372dd1faf97cf0f1c0 upstream.
During task_group creation, sched_create_group() calls
scx_group_set_weight() with CGROUP_WEIGHT_DFL to initialize the sched_ext
portion. This is premature and ends up calling ops.cgroup_set_weight() with
an incorrect @cgrp before ops.cgroup_init() is called.
sched_create_group() should just initialize SCX related fields in the new
task_group. Fix it by factoring out scx_tg_init() from sched_init() and
making sched_create_group() call that function instead of
scx_group_set_weight().
v2: Retain CONFIG_EXT_GROUP_SCHED ifdef in sched_init() as removing it leads
to build failures on !CONFIG_GROUP_SCHED configs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 819513666966 ("sched_ext: Add cgroup support")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b7ca5743a2604156d6083b88cefacef983f3a3a6 ]
It was reported that in 6.12, smpboot_create_threads() was
taking much longer then in 6.6.
I narrowed down the call path to:
smpboot_create_threads()
-> kthread_create_on_cpu()
-> kthread_bind()
-> __kthread_bind_mask()
->wait_task_inactive()
Where in wait_task_inactive() we were regularly hitting the
queued case, which sets a 1 tick timeout, which when called
multiple times in a row, accumulates quickly into a long
delay.
I noticed disabling the DELAY_DEQUEUE sched feature recovered
the performance, and it seems the newly create tasks are usually
sched_delayed and left on the runqueue.
So in wait_task_inactive() when we see the task
p->se.sched_delayed, manually dequeue the sched_delayed task
with DEQUEUE_DELAYED, so we don't have to constantly wait a
tick.
Fixes: 152e11f6df29 ("sched/fair: Implement delayed dequeue")
Reported-by: peter-yc.chang@mediatek.com
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250429150736.3778580-1-jstultz@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8feb053d53194382fcfb68231296fdc220497ea6 ]
Gabriele noted that in case of signal_pending_state(), the tracepoint
sees a stale task-state.
Fixes: fa2c3254d7cf ("sched/tracing: Don't re-read p->state when emitting sched_switch event")
Reported-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2ae891b826958b60919ea21c727f77bcd6ffcc2c ]
The old default value for slice is 0.75 msec * (1 + ilog(ncpus)) which
means that we have a default slice of:
0.75 for 1 cpu
1.50 up to 3 cpus
2.25 up to 7 cpus
3.00 for 8 cpus and above.
For HZ=250 and HZ=100, because of the tick accuracy, the runtime of
tasks is far higher than their slice.
For HZ=1000 with 8 cpus or more, the accuracy of tick is already
satisfactory, but there is still an issue that tasks will get an extra
tick because the tick often arrives a little faster than expected. In
this case, the task can only wait until the next tick to consider that it
has reached its deadline, and will run 1ms longer.
vruntime + sysctl_sched_base_slice = deadline
|-----------|-----------|-----------|-----------|
1ms 1ms 1ms 1ms
^ ^ ^ ^
tick1 tick2 tick3 tick4(nearly 4ms)
There are two reasons for tick error: clockevent precision and the
CONFIG_IRQ_TIME_ACCOUNTING/CONFIG_PARAVIRT_TIME_ACCOUNTING. with
CONFIG_IRQ_TIME_ACCOUNTING every tick will be less than 1ms, but even
without it, because of clockevent precision, tick still often less than
1ms.
In order to make scheduling more precise, we changed 0.75 to 0.70,
Using 0.70 instead of 0.75 should not change much for other configs
and would fix this issue:
0.70 for 1 cpu
1.40 up to 3 cpus
2.10 up to 7 cpus
2.8 for 8 cpus and above.
This does not guarantee that tasks can run the slice time accurately
every time, but occasionally running an extra tick has little impact.
Signed-off-by: zihan zhou <15645113830zzh@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20250208075322.13139-1-15645113830zzh@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 428dc9fc0873989d73918d4a9cc22745b7bbc799 upstream.
BPF programs may call next() and destroy() on BPF iterators even after new()
returns an error value (e.g. bpf_for_each() macro ignores error returns from
new()). bpf_iter_scx_dsq_new() could leave the iterator in an uninitialized
state after an error return causing bpf_iter_scx_dsq_next() to dereference
garbage data. Make bpf_iter_scx_dsq_new() always clear $kit->dsq so that
next() and destroy() become noops.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 650ba21b131e ("sched_ext: Implement DSQ iterator")
Cc: stable@vger.kernel.org # v6.12+
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bbce3de72be56e4b5f68924b7da9630cc89aa1a8 upstream.
There is a code path in dequeue_entities() that can set the slice of a
sched_entity to U64_MAX, which sometimes results in a crash.
The offending case is when dequeue_entities() is called to dequeue a
delayed group entity, and then the entity's parent's dequeue is delayed.
In that case:
1. In the if (entity_is_task(se)) else block at the beginning of
dequeue_entities(), slice is set to
cfs_rq_min_slice(group_cfs_rq(se)). If the entity was delayed, then
it has no queued tasks, so cfs_rq_min_slice() returns U64_MAX.
2. The first for_each_sched_entity() loop dequeues the entity.
3. If the entity was its parent's only child, then the next iteration
tries to dequeue the parent.
4. If the parent's dequeue needs to be delayed, then it breaks from the
first for_each_sched_entity() loop _without updating slice_.
5. The second for_each_sched_entity() loop sets the parent's ->slice to
the saved slice, which is still U64_MAX.
This throws off subsequent calculations with potentially catastrophic
results. A manifestation we saw in production was:
6. In update_entity_lag(), se->slice is used to calculate limit, which
ends up as a huge negative number.
7. limit is used in se->vlag = clamp(vlag, -limit, limit). Because limit
is negative, vlag > limit, so se->vlag is set to the same huge
negative number.
8. In place_entity(), se->vlag is scaled, which overflows and results in
another huge (positive or negative) number.
9. The adjusted lag is subtracted from se->vruntime, which increases or
decreases se->vruntime by a huge number.
10. pick_eevdf() calls entity_eligible()/vruntime_eligible(), which
incorrectly returns false because the vruntime is so far from the
other vruntimes on the queue, causing the
(vruntime - cfs_rq->min_vruntime) * load calulation to overflow.
11. Nothing appears to be eligible, so pick_eevdf() returns NULL.
12. pick_next_entity() tries to dereference the return value of
pick_eevdf() and crashes.
Dumping the cfs_rq states from the core dumps with drgn showed tell-tale
huge vruntime ranges and bogus vlag values, and I also traced se->slice
being set to U64_MAX on live systems (which was usually "benign" since
the rest of the runqueue needed to be in a particular state to crash).
Fix it in dequeue_entities() by always setting slice from the first
non-empty cfs_rq.
Fixes: aef6987d8954 ("sched/eevdf: Propagate min_slice up the cgroup hierarchy")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/f0c2d1072be229e1bdddc73c0703919a8b00c652.1745570998.git.osandov@fb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 47068309b5777313b6ac84a77d8d10dc7312260a upstream.
Replace kzalloc with kvzalloc for the exit_dump buffer allocation, which
can require large contiguous memory depending on the implementation.
This change prevents allocation failures by allowing the system to fall
back to vmalloc when contiguous memory allocation fails.
Since this buffer is only used for debugging purposes, physical memory
contiguity is not required, making vmalloc a suitable alternative.
Cc: stable@vger.kernel.org
Fixes: 07814a9439a3b0 ("sched_ext: Print debug dump after an error exit")
Suggested-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 79443a7e9da3c9f68290a8653837e23aba0fa89f upstream.
The handling of the limits_changed flag in struct sugov_policy needs to
be explicitly synchronized to ensure that cpufreq policy limits updates
will not be missed in some cases.
Without that synchronization it is theoretically possible that
the limits_changed update in sugov_should_update_freq() will be
reordered with respect to the reads of the policy limits in
cpufreq_driver_resolve_freq() and in that case, if the limits_changed
update in sugov_limits() clobbers the one in sugov_should_update_freq(),
the new policy limits may not take effect for a long time.
Likewise, the limits_changed update in sugov_limits() may theoretically
get reordered with respect to the updates of the policy limits in
cpufreq_set_policy() and if sugov_should_update_freq() runs between
them, the policy limits change may be missed.
To ensure that the above situations will not take place, add memory
barriers preventing the reordering in question from taking place and
add READ_ONCE() and WRITE_ONCE() annotations around all of the
limits_changed flag updates to prevent the compiler from messing up
with that code.
Fixes: 600f5badb78c ("cpufreq: schedutil: Don't skip freq update when limits change")
Cc: 5.3+ <stable@vger.kernel.org> # 5.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/3376719.44csPzL39Z@rjwysocki.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cfde542df7dd51d26cf667f4af497878ddffd85a ]
Commit 8e461a1cb43d ("cpufreq: schedutil: Fix superfluous updates caused
by need_freq_update") modified sugov_should_update_freq() to set the
need_freq_update flag only for drivers with CPUFREQ_NEED_UPDATE_LIMITS
set, but that flag generally needs to be set when the policy limits
change because the driver callback may need to be invoked for the new
limits to take effect.
However, if the return value of cpufreq_driver_resolve_freq() after
applying the new limits is still equal to the previously selected
frequency, the driver callback needs to be invoked only in the case
when CPUFREQ_NEED_UPDATE_LIMITS is set (which means that the driver
specifically wants its callback to be invoked every time the policy
limits change).
Update the code accordingly to avoid missing policy limits changes for
drivers without CPUFREQ_NEED_UPDATE_LIMITS.
Fixes: 8e461a1cb43d ("cpufreq: schedutil: Fix superfluous updates caused by need_freq_update")
Closes: https://lore.kernel.org/lkml/Z_Tlc6Qs-tYpxWYb@linaro.org/
Reported-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/3010358.e9J7NaK4W3@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit a8897ed8523d4c9d782e282b18005a3779c92714 upstream.
create_dsq and therefore the scx_bpf_create_dsq kfunc currently silently
ignore duplicate entries. As a sched_ext scheduler is creating each DSQ
for a different purpose this is surprising behaviour.
Replace rhashtable_insert_fast which ignores duplicates with
rhashtable_lookup_insert_fast that reports duplicates (though doesn't
return their value). The rest of the code is structured correctly and
this now returns -EEXIST.
Tested by adding an extra scx_bpf_create_dsq to scx_simple. Previously
this was ignored, now init fails with a -17 code. Also ran scx_lavd
which continued to work well.
Signed-off-by: Jake Hillion <jake@hillion.co.uk>
Acked-by: Andrea Righi <arighi@nvidia.com>
Fixes: f0e1a0643a59 ("sched_ext: Implement BPF extensible scheduler class")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 14672f059d83f591afb2ee1fff56858efe055e5a ]
The ftrace selftest reported a failure because writing -1 to
sched_rt_runtime_us returns -EBUSY. This happens when the possible
CPUs are different from active CPUs.
Active CPUs are part of one root domain, while remaining CPUs are part
of def_root_domain. Since active cpumask is being used, this results in
cpus=0 when a non active CPUs is used in the loop.
Fix it by looping over the online CPUs instead for validating the
bandwidth calculations.
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20250306052954.452005-2-sshegde@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 563bc2161b94571ea425bbe2cf69fd38e24cdedf ]
When a task is enqueued and its parent cgroup se is already on_rq, this
parent cgroup se will not be enqueued again, and hence the root->min_slice
leaves unchanged. The same issue happens when a task is dequeued and its
parent cgroup se has other runnable entities, and the parent cgroup se
will not be dequeued.
Force propagating min_slice when se doesn't need to be enqueued or
dequeued. Ensure the se hierarchy always get the latest min_slice.
Fixes: aef6987d8954 ("sched/eevdf: Propagate min_slice up the cgroup hierarchy")
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250211063659.7180-1-dtcccc@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f553741ac8c0e467a3b873e305f34b902e50b86d ]
A wakeup non-idle entity should preempt idle entity at any time,
but because of the slice protection of the idle entity, the non-idle
entity has to wait, so just cancel it.
This patch is aimed at minimizing the impact of SCHED_IDLE on
SCHED_NORMAL. For example, a task with SCHED_IDLE policy that sleeps for
1s and then runs for 3 ms, running cyclictest on the same cpu, has a
maximum latency of 3 ms, which is caused by the slice protection of the
idle entity. It is unreasonable. With this patch, the cyclictest latency
under the same conditions is basically the same on the cpu with idle
processes and on empty cpu.
[peterz: add helpers]
Fixes: 63304558ba5d ("sched/eevdf: Curb wakeup-preemption")
Signed-off-by: zihan zhou <15645113830zzh@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20250208080850.16300-1-15645113830zzh@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 76f970ce51c80f625eb6ddbb24e9cb51b977b598 upstream.
This reverts commit eff6c8ce8d4d7faef75f66614dd20bb50595d261.
Hazem reported a 30% drop in UnixBench spawn test with commit
eff6c8ce8d4d ("sched/core: Reduce cost of sched_move_task when config
autogroup") on a m6g.xlarge AWS EC2 instance with 4 vCPUs and 16 GiB RAM
(aarch64) (single level MC sched domain):
https://lkml.kernel.org/r/20250205151026.13061-1-hagarhem@amazon.com
There is an early bail from sched_move_task() if p->sched_task_group is
equal to p's 'cpu cgroup' (sched_get_task_group()). E.g. both are
pointing to taskgroup '/user.slice/user-1000.slice/session-1.scope'
(Ubuntu '22.04.5 LTS').
So in:
do_exit()
sched_autogroup_exit_task()
sched_move_task()
if sched_get_task_group(p) == p->sched_task_group
return
/* p is enqueued */
dequeue_task() \
sched_change_group() |
task_change_group_fair() |
detach_task_cfs_rq() | (1)
set_task_rq() |
attach_task_cfs_rq() |
enqueue_task() /
(1) isn't called for p anymore.
Turns out that the regression is related to sgs->group_util in
group_is_overloaded() and group_has_capacity(). If (1) isn't called for
all the 'spawn' tasks then sgs->group_util is ~900 and
sgs->group_capacity = 1024 (single CPU sched domain) and this leads to
group_is_overloaded() returning true (2) and group_has_capacity() false
(3) much more often compared to the case when (1) is called.
I.e. there are much more cases of 'group_is_overloaded' and
'group_fully_busy' in WF_FORK wakeup sched_balance_find_dst_cpu() which
then returns much more often a CPU != smp_processor_id() (5).
This isn't good for these extremely short running tasks (FORK + EXIT)
and also involves calling sched_balance_find_dst_group_cpu() unnecessary
(single CPU sched domain).
Instead if (1) is called for 'p->flags & PF_EXITING' then the path
(4),(6) is taken much more often.
select_task_rq_fair(..., wake_flags = WF_FORK)
cpu = smp_processor_id()
new_cpu = sched_balance_find_dst_cpu(..., cpu, ...)
group = sched_balance_find_dst_group(..., cpu)
do {
update_sg_wakeup_stats()
sgs->group_type = group_classify()
if group_is_overloaded() (2)
return group_overloaded
if !group_has_capacity() (3)
return group_fully_busy
return group_has_spare (4)
} while group
if local_sgs.group_type > idlest_sgs.group_type
return idlest (5)
case group_has_spare:
if local_sgs.idle_cpus >= idlest_sgs.idle_cpus
return NULL (6)
Unixbench Tests './Run -c 4 spawn' on:
(a) VM AWS instance (m7gd.16xlarge) with v6.13 ('maxcpus=4 nr_cpus=4')
and Ubuntu 22.04.5 LTS (aarch64).
Shell & test run in '/user.slice/user-1000.slice/session-1.scope'.
w/o patch w/ patch
21005 27120
(b) i7-13700K with tip/sched/core ('nosmt maxcpus=8 nr_cpus=8') and
Ubuntu 22.04.5 LTS (x86_64).
Shell & test run in '/A'.
w/o patch w/ patch
67675 88806
CONFIG_SCHED_AUTOGROUP=y & /sys/proc/kernel/sched_autogroup_enabled equal
0 or 1.
Reported-by: Hazem Mohamed Abuelfotoh <abuehaze@amazon.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Hagar Hemdan <hagarhem@amazon.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250314151345.275739-1-dietmar.eggemann@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9360dfe4cbd62ff1eb8217b815964931523b75b3 upstream.
If a BPF scheduler provides an invalid CPU (outside the nr_cpu_ids
range) as prev_cpu to scx_bpf_select_cpu_dfl() it can cause a kernel
crash.
To prevent this, validate prev_cpu in scx_bpf_select_cpu_dfl() and
trigger an scx error if an invalid CPU is specified.
Fixes: f0e1a0643a59b ("sched_ext: Implement BPF extensible scheduler class")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bcc6244e13b4d4903511a1ea84368abf925031c0 ]
Clarify that wake_up_q() does an atomic write to task->wake_q.next, after
which a concurrent __wake_q_add() can immediately overwrite
task->wake_q.next again.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250129-sched-wakeup-prettier-v1-1-2f51f5f663fa@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9065ce69754dece78606c8bbb3821449272e56bf ]
Since commit:
857b158dc5e8 ("sched/eevdf: Use sched_attr::sched_runtime to set request/slice suggestion")
... we have the userspace per-task tunable slice length, which is
a key parameter that is otherwise difficult to obtain, so provide
it in /proc/$PID/sched.
[ mingo: Clarified the changelog. ]
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/453349b1-1637-42f5-a7b2-2385392b5956@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3b4035ddbfc8e4521f85569998a7569668cccf51 ]
child_cfs_rq_on_list attempts to convert a 'prev' pointer to a cfs_rq.
This 'prev' pointer can originate from struct rq's leaf_cfs_rq_list,
making the conversion invalid and potentially leading to memory
corruption. Depending on the relative positions of leaf_cfs_rq_list and
the task group (tg) pointer within the struct, this can cause a memory
fault or access garbage data.
The issue arises in list_add_leaf_cfs_rq, where both
cfs_rq->leaf_cfs_rq_list and rq->leaf_cfs_rq_list are added to the same
leaf list. Also, rq->tmp_alone_branch can be set to rq->leaf_cfs_rq_list.
This adds a check `if (prev == &rq->leaf_cfs_rq_list)` after the main
conditional in child_cfs_rq_on_list. This ensures that the container_of
operation will convert a correct cfs_rq struct.
This check is sufficient because only cfs_rqs on the same CPU are added
to the list, so verifying the 'prev' pointer against the current rq's list
head is enough.
Fixes a potential memory corruption issue that due to current struct
layout might not be manifesting as a crash but could lead to unpredictable
behavior when the layout changes.
Fixes: fdaba61ef8a2 ("sched/fair: Ensure that the CFS parent is added after unthrottling")
Signed-off-by: Zecheng Li <zecheng@google.com>
Reviewed-and-tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250304214031.2882646-1-zecheng@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
without balance()
commit 8fef0a3b17bb258130a4fcbcb5addf94b25e9ec5 upstream.
a6250aa251ea ("sched_ext: Handle cases where pick_task_scx() is called
without preceding balance_scx()") added a workaround to handle the cases
where pick_task_scx() is called without prececing balance_scx() which is due
to a fair class bug where pick_taks_fair() may return NULL after a true
return from balance_fair().
The workaround detects when pick_task_scx() is called without preceding
balance_scx() and emulates SCX_RQ_BAL_KEEP and triggers kicking to avoid
stalling. Unfortunately, the workaround code was testing whether @prev was
on SCX to decide whether to keep the task running. This is incorrect as the
task may be on SCX but no longer runnable.
This could lead to a non-runnable task to be returned from pick_task_scx()
which cause interesting confusions and failures. e.g. A common failure mode
is the task ending up with (!on_rq && on_cpu) state which can cause
potential wakers to busy loop, which can easily lead to deadlocks.
Fix it by testing whether @prev has SCX_TASK_QUEUED set. This makes
@prev_on_scx only used in one place. Open code the usage and improve the
comment while at it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Pat Cody <patcody@meta.com>
Fixes: a6250aa251ea ("sched_ext: Handle cases where pick_task_scx() is called without preceding balance_scx()")
Cc: stable@vger.kernel.org # v6.12+
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 82c387ef7568c0d96a918a5a78d9cad6256cfa15 upstream.
David reported a warning observed while loop testing kexec jump:
Interrupts enabled after irqrouter_resume+0x0/0x50
WARNING: CPU: 0 PID: 560 at drivers/base/syscore.c:103 syscore_resume+0x18a/0x220
kernel_kexec+0xf6/0x180
__do_sys_reboot+0x206/0x250
do_syscall_64+0x95/0x180
The corresponding interrupt flag trace:
hardirqs last enabled at (15573): [<ffffffffa8281b8e>] __up_console_sem+0x7e/0x90
hardirqs last disabled at (15580): [<ffffffffa8281b73>] __up_console_sem+0x63/0x90
That means __up_console_sem() was invoked with interrupts enabled. Further
instrumentation revealed that in the interrupt disabled section of kexec
jump one of the syscore_suspend() callbacks woke up a task, which set the
NEED_RESCHED flag. A later callback in the resume path invoked
cond_resched() which in turn led to the invocation of the scheduler:
__cond_resched+0x21/0x60
down_timeout+0x18/0x60
acpi_os_wait_semaphore+0x4c/0x80
acpi_ut_acquire_mutex+0x3d/0x100
acpi_ns_get_node+0x27/0x60
acpi_ns_evaluate+0x1cb/0x2d0
acpi_rs_set_srs_method_data+0x156/0x190
acpi_pci_link_set+0x11c/0x290
irqrouter_resume+0x54/0x60
syscore_resume+0x6a/0x200
kernel_kexec+0x145/0x1c0
__do_sys_reboot+0xeb/0x240
do_syscall_64+0x95/0x180
This is a long standing problem, which probably got more visible with
the recent printk changes. Something does a task wakeup and the
scheduler sets the NEED_RESCHED flag. cond_resched() sees it set and
invokes schedule() from a completely bogus context. The scheduler
enables interrupts after context switching, which causes the above
warning at the end.
Quite some of the code paths in syscore_suspend()/resume() can result in
triggering a wakeup with the exactly same consequences. They might not
have done so yet, but as they share a lot of code with normal operations
it's just a question of time.
The problem only affects the PREEMPT_NONE and PREEMPT_VOLUNTARY scheduling
models. Full preemption is not affected as cond_resched() is disabled and
the preemption check preemptible() takes the interrupt disabled flag into
account.
Cure the problem by adding a corresponding check into cond_resched().
Reported-by: David Woodhouse <dwmw@amazon.co.uk>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/7717fe2ac0ce5f0a2c43fdab8b11f4483d54a2a4.camel@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
task_can_run_on_remote_rq()
commit f3f08c3acfb8860e07a22814a344e83c99ad7398 upstream.
While fixing migration disabled task handling, 32966821574c ("sched_ext: Fix
migration disabled handling in targeted dispatches") assumed that a
migration disabled task's ->cpus_ptr would only have the pinned CPU. While
this is eventually true for migration disabled tasks that are switched out,
->cpus_ptr update is performed by migrate_disable_switch() which is called
right before context_switch() in __scheduler(). However, the task is
enqueued earlier during pick_next_task() via put_prev_task_scx(), so there
is a race window where another CPU can see the task on a DSQ.
If the CPU tries to dispatch the migration disabled task while in that
window, task_allowed_on_cpu() will succeed and task_can_run_on_remote_rq()
will subsequently trigger SCHED_WARN(is_migration_disabled()).
WARNING: CPU: 8 PID: 1837 at kernel/sched/ext.c:2466 task_can_run_on_remote_rq+0x12e/0x140
Sched_ext: layered (enabled+all), task: runnable_at=-10ms
RIP: 0010:task_can_run_on_remote_rq+0x12e/0x140
...
<TASK>
consume_dispatch_q+0xab/0x220
scx_bpf_dsq_move_to_local+0x58/0xd0
bpf_prog_84dd17b0654b6cf0_layered_dispatch+0x290/0x1cfa
bpf__sched_ext_ops_dispatch+0x4b/0xab
balance_one+0x1fe/0x3b0
balance_scx+0x61/0x1d0
prev_balance+0x46/0xc0
__pick_next_task+0x73/0x1c0
__schedule+0x206/0x1730
schedule+0x3a/0x160
__do_sys_sched_yield+0xe/0x20
do_syscall_64+0xbb/0x1e0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fix it by converting the SCHED_WARN() back to a regular failure path. Also,
perform the migration disabled test before task_allowed_on_cpu() test so
that BPF schedulers which fail to handle migration disabled tasks can be
noticed easily.
While at it, adjust scx_ops_error() message for !task_allowed_on_cpu() case
for brevity and consistency.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 32966821574c ("sched_ext: Fix migration disabled handling in targeted dispatches")
Acked-by: Andrea Righi <arighi@nvidia.com>
Reported-by: Jake Hillion <jakehillion@meta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 32966821574cd2917bd60f2554f435fe527f4702 ]
A dispatch operation that can target a specific local DSQ -
scx_bpf_dsq_move_to_local() or scx_bpf_dsq_move() - checks whether the task
can be migrated to the target CPU using task_can_run_on_remote_rq(). If the
task can't be migrated to the targeted CPU, it is bounced through a global
DSQ.
task_can_run_on_remote_rq() assumes that the task is on a CPU that's
different from the targeted CPU but the callers doesn't uphold the
assumption and may call the function when the task is already on the target
CPU. When such task has migration disabled, task_can_run_on_remote_rq() ends
up returning %false incorrectly unnecessarily bouncing the task to a global
DSQ.
Fix it by updating the callers to only call task_can_run_on_remote_rq() when
the task is on a different CPU than the target CPU. As this is a bit subtle,
for clarity and documentation:
- Make task_can_run_on_remote_rq() trigger SCHED_WARN_ON() if the task is on
the same CPU as the target CPU.
- is_migration_disabled() test in task_can_run_on_remote_rq() cannot trigger
if the task is on a different CPU than the target CPU as the preceding
task_allowed_on_cpu() test should fail beforehand. Convert the test into
SCHED_WARN_ON().
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 4c30f5ce4f7a ("sched_ext: Implement scx_bpf_dispatch[_vtime]_from_dsq()")
Fixes: 0366017e0973 ("sched_ext: Use task_can_run_on_remote_rq() test in dispatch_to_local_dsq()")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8427acb6b5861d205abca7afa656a897bbae34b7 ]
Pure reorganization. No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Stable-dep-of: 32966821574c ("sched_ext: Fix migration disabled handling in targeted dispatches")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d6f3e7d564b2309e1f17e709a70eca78d7ca2bb8 upstream.
scx_move_task() is called from sched_move_task() and tells the BPF scheduler
that cgroup migration is being committed. sched_move_task() is used by both
cgroup and autogroup migrations and scx_move_task() tried to filter out
autogroup migrations by testing the destination cgroup and PF_EXITING but
this is not enough. In fact, without explicitly tagging the thread which is
doing the cgroup migration, there is no good way to tell apart
scx_move_task() invocations for racing migration to the root cgroup and an
autogroup migration.
This led to scx_move_task() incorrectly ignoring a migration from non-root
cgroup to an autogroup of the root cgroup triggering the following warning:
WARNING: CPU: 7 PID: 1 at kernel/sched/ext.c:3725 scx_cgroup_can_attach+0x196/0x340
...
Call Trace:
<TASK>
cgroup_migrate_execute+0x5b1/0x700
cgroup_attach_task+0x296/0x400
__cgroup_procs_write+0x128/0x140
cgroup_procs_write+0x17/0x30
kernfs_fop_write_iter+0x141/0x1f0
vfs_write+0x31d/0x4a0
__x64_sys_write+0x72/0xf0
do_syscall_64+0x82/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix it by adding an argument to sched_move_task() that indicates whether the
moving is for a cgroup or autogroup migration. After the change,
scx_move_task() is called only for cgroup migrations and renamed to
scx_cgroup_move_task().
Link: https://github.com/sched-ext/scx/issues/370
Fixes: 819513666966 ("sched_ext: Add cgroup support")
Cc: stable@vger.kernel.org # v6.12+
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f5717c93a1b999970f3a64d771a1a9ee68cc37d0 ]
Now when we use scx_bpf_task_cgroup() in ops.tick() to get the cgroup of
the current task, the following error will occur:
scx_foo[3795244] triggered exit kind 1024:
runtime error (called on a task not being operated on)
The reason is that we are using SCX_CALL_OP() instead of SCX_CALL_OP_TASK()
when calling ops.tick(), which triggers the error during the subsequent
scx_kf_allowed_on_arg_tasks() check.
SCX_CALL_OP_TASK() was first introduced in commit 36454023f50b ("sched_ext:
Track tasks that are subjects of the in-flight SCX operation") to ensure
task's rq lock is held when accessing task's sched_group. Since ops.tick()
is marked as SCX_KF_TERMINAL and task_tick_scx() is protected by the rq
lock, we can use SCX_CALL_OP_TASK() to avoid the above issue. Similarly,
the same changes should be made for ops.disable() and ops.exit_task(), as
they are also protected by task_rq_lock() and it's safe to access the
task's task_group.
Fixes: 36454023f50b ("sched_ext: Track tasks that are subjects of the in-flight SCX operation")
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1626e5ef0b00386a4fd083fa7c46c8edbd75f9b4 ]
While performing the rq locking dance in dispatch_to_local_dsq(), we may
trigger the following lock imbalance condition, in particular when
multiple tasks are rapidly changing CPU affinity (i.e., running a
`stress-ng --race-sched 0`):
[ 13.413579] =====================================
[ 13.413660] WARNING: bad unlock balance detected!
[ 13.413729] 6.13.0-virtme #15 Not tainted
[ 13.413792] -------------------------------------
[ 13.413859] kworker/1:1/80 is trying to release lock (&rq->__lock) at:
[ 13.413954] [<ffffffff873c6c48>] dispatch_to_local_dsq+0x108/0x1a0
[ 13.414111] but there are no more locks to release!
[ 13.414176]
[ 13.414176] other info that might help us debug this:
[ 13.414258] 1 lock held by kworker/1:1/80:
[ 13.414318] #0: ffff8b66feb41698 (&rq->__lock){-.-.}-{2:2}, at: raw_spin_rq_lock_nested+0x20/0x90
[ 13.414612]
[ 13.414612] stack backtrace:
[ 13.415255] CPU: 1 UID: 0 PID: 80 Comm: kworker/1:1 Not tainted 6.13.0-virtme #15
[ 13.415505] Workqueue: 0x0 (events)
[ 13.415567] Sched_ext: dsp_local_on (enabled+all), task: runnable_at=-2ms
[ 13.415570] Call Trace:
[ 13.415700] <TASK>
[ 13.415744] dump_stack_lvl+0x78/0xe0
[ 13.415806] ? dispatch_to_local_dsq+0x108/0x1a0
[ 13.415884] print_unlock_imbalance_bug+0x11b/0x130
[ 13.415965] ? dispatch_to_local_dsq+0x108/0x1a0
[ 13.416226] lock_release+0x231/0x2c0
[ 13.416326] _raw_spin_unlock+0x1b/0x40
[ 13.416422] dispatch_to_local_dsq+0x108/0x1a0
[ 13.416554] flush_dispatch_buf+0x199/0x1d0
[ 13.416652] balance_one+0x194/0x370
[ 13.416751] balance_scx+0x61/0x1e0
[ 13.416848] prev_balance+0x43/0xb0
[ 13.416947] __pick_next_task+0x6b/0x1b0
[ 13.417052] __schedule+0x20d/0x1740
This happens because dispatch_to_local_dsq() is racing with
dispatch_dequeue() and, when the latter wins, we incorrectly assume that
the task has been moved to dst_rq.
Fix by properly tracking the currently locked rq.
Fixes: 4d3ca89bdd31 ("sched_ext: Refactor consume_remote_task()")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3429dd57f0deb1a602c2624a1dd7c4c11b6c4734 ]
set_delayed() adjusts cfs_rq->h_nr_runnable for the hierarchy when an
entity is delayed irrespective of whether the entity corresponds to a
task or a cfs_rq.
Consider the following scenario:
root
/ \
A B (*) delayed since B is no longer eligible on root
| |
Task0 Task1 <--- dequeue_task_fair() - task blocks
When Task1 blocks (dequeue_entity() for task's se returns true),
dequeue_entities() will continue adjusting cfs_rq->h_nr_* for the
hierarchy of Task1. However, when the sched_entity corresponding to
cfs_rq B is delayed, set_delayed() will adjust the h_nr_runnable for the
hierarchy too leading to both dequeue_entity() and set_delayed()
decrementing h_nr_runnable for the dequeue of the same task.
A SCHED_WARN_ON() to inspect h_nr_runnable post its update in
dequeue_entities() like below:
cfs_rq->h_nr_runnable -= h_nr_runnable;
SCHED_WARN_ON(((int) cfs_rq->h_nr_runnable) < 0);
is consistently tripped when running wakeup intensive workloads like
hackbench in a cgroup.
This error is self correcting since cfs_rq are per-cpu and cannot
migrate. The entitiy is either picked for full dequeue or is requeued
when a task wakes up below it. Both those paths call clear_delayed()
which again increments h_nr_runnable of the hierarchy without
considering if the entity corresponds to a task or not.
h_nr_runnable will eventually reflect the correct value however in the
interim, the incorrect values can still influence PELT calculation which
uses se->runnable_weight or cfs_rq->h_nr_runnable.
Since only delayed tasks take the early return path in
dequeue_entities() and enqueue_task_fair(), adjust the
h_nr_runnable in {set,clear}_delayed() only when a task is delayed as
this path skips the h_nr_* update loops and returns early.
For entities corresponding to cfs_rq, the h_nr_* update loop in the
caller will do the right thing.
Fixes: 76f2f783294d ("sched/eevdf: More PELT vs DELAYED_DEQUEUE")
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Link: https://lkml.kernel.org/r/20250117105852.23908-1-kprateek.nayak@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 108ad0999085df2366dd9ef437573955cb3f5586 ]
When steal time exceeds the measured delta when updating clock_task, we
currently try to catch up the excess in future updates.
However, this results in inaccurate run times for the future things using
clock_task, in some situations, as they end up getting additional steal
time that did not actually happen.
This is because there is a window between reading the elapsed time in
update_rq_clock() and sampling the steal time in update_rq_clock_task().
If the VCPU gets preempted between those two points, any additional
steal time is accounted to the outgoing task even though the calculated
delta did not actually contain any of that "stolen" time.
When this race happens, we can end up with steal time that exceeds the
calculated delta, and the previous code would try to catch up that excess
steal time in future clock updates, which is given to the next,
incoming task, even though it did not actually have any time stolen.
This behavior is particularly bad when steal time can be very long,
which we've seen when trying to extend steal time to contain the duration
that the host was suspended [0]. When this happens, clock_task stays
frozen, during which the running task stays running for the whole
duration, since its run time doesn't increase.
However the race can happen even under normal operation.
Ideally we would read the elapsed cpu time and the steal time atomically,
to prevent this race from happening in the first place, but doing so
is non-trivial.
Since the time between those two points isn't otherwise accounted anywhere,
neither to the outgoing task nor the incoming task (because the "end of
outgoing task" and "start of incoming task" timestamps are the same),
I would argue that the right thing to do is to simply drop any excess steal
time, in order to prevent these issues.
[0] https://lore.kernel.org/kvm/20240820043543.837914-1-suleiman@google.com/
Signed-off-by: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241118043745.1857272-1-suleiman@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8e461a1cb43d69d2fc8a97e61916dce571e6bb31 ]
A redundant frequency update is only truly needed when there is a policy
limits change with a driver that specifies CPUFREQ_NEED_UPDATE_LIMITS.
In spite of that, drivers specifying CPUFREQ_NEED_UPDATE_LIMITS receive a
frequency update _all the time_, not just for a policy limits change,
because need_freq_update is never cleared.
Furthermore, ignore_dl_rate_limit()'s usage of need_freq_update also leads
to a redundant frequency update, regardless of whether or not the driver
specifies CPUFREQ_NEED_UPDATE_LIMITS, when the next chosen frequency is the
same as the current one.
Fix the superfluous updates by only honoring CPUFREQ_NEED_UPDATE_LIMITS
when there's a policy limits change, and clearing need_freq_update when a
requisite redundant update occurs.
This is neatly achieved by moving up the CPUFREQ_NEED_UPDATE_LIMITS test
and instead setting need_freq_update to false in sugov_update_next_freq().
Fixes: 600f5badb78c ("cpufreq: schedutil: Don't skip freq update when limits change")
Signed-off-by: Sultan Alsawaf (unemployed) <sultan@kerneltoast.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20241212015734.41241-2-sultan@kerneltoast.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7d9da040575b343085287686fa902a5b2d43c7ca ]
When running hackbench in a cgroup with bandwidth throttling enabled,
following PSI splat was observed:
psi: inconsistent task state! task=1831:hackbench cpu=8 psi_flags=14 clear=0 set=4
When investigating the series of events leading up to the splat,
following sequence was observed:
[008] d..2.: sched_switch: ... ==> next_comm=hackbench next_pid=1831 next_prio=120
...
[008] dN.2.: dequeue_entity(task delayed): task=hackbench pid=1831 cfs_rq->throttled=0
[008] dN.2.: pick_task_fair: check_cfs_rq_runtime() throttled cfs_rq on CPU8
# CPU8 goes into newidle balance and releases the rq lock
...
# CPU15 on same LLC Domain is trying to wakeup hackbench(pid=1831)
[015] d..4.: psi_flags_change: psi: task state: task=1831:hackbench cpu=8 psi_flags=14 clear=0 set=4 final=14 # Splat (cfs_rq->throttled=1)
[015] d..4.: sched_wakeup: comm=hackbench pid=1831 prio=120 target_cpu=008 # Task has woken on a throttled hierarchy
[008] d..2.: sched_switch: prev_comm=hackbench prev_pid=1831 prev_prio=120 prev_state=S ==> ...
psi_dequeue() relies on psi_sched_switch() to set the correct PSI flags
for the blocked entity, however, with the introduction of DELAY_DEQUEUE,
the block task can wakeup when newidle balance drops the runqueue lock
during __schedule().
If a task wakes before psi_sched_switch() adjusts the PSI flags, skip
any modifications in psi_enqueue() which would still see the flags of a
running task and not a blocked one. Instead, rely on psi_sched_switch()
to do the right thing.
Since the status returned by try_to_block_task() may no longer be true
by the time schedule reaches psi_sched_switch(), check if the task is
blocked or not using a combination of task_on_rq_queued() and
p->se.sched_delayed checks.
[ prateek: Commit message, testing, early bailout in psi_enqueue() ]
Fixes: 152e11f6df29 ("sched/fair: Implement delayed dequeue") # 1a6151017ee5
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Link: https://lore.kernel.org/r/20241227061941.2315-1-kprateek.nayak@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1a6151017ee5a30cb2d959f110ab18fc49646467 ]
What psi needs to do on each enqueue and dequeue has gotten more
subtle, and the generic sched code trying to distill this into a bool
for the callbacks is awkward.
Pass the flags directly and let psi parse them. For that to work, the
#include "stats.h" (which has the psi callback implementations) needs
to be below the flag definitions in "sched.h". Move that section
further down, next to some of the other accounting stuff.
This also puts the ENQUEUE_SAVE/RESTORE branch behind the psi jump
label, slightly reducing overhead when PSI=y but runtime disabled.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241014144358.GB1021@cmpxchg.org
Stable-dep-of: 7d9da040575b ("psi: Fix race when task wakes up before psi_sched_switch() adjusts flags")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7b3d61f6578ab06f130ecc13cd2f3010a6c295bb ]
As we're going to re-use the deactivation logic,
split it into a helper.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Metin Kaya <metin.kaya@arm.com>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Metin Kaya <metin.kaya@arm.com>
Link: https://lore.kernel.org/r/20241009235352.1614323-7-jstultz@google.com
Stable-dep-of: 7d9da040575b ("psi: Fix race when task wakes up before psi_sched_switch() adjusts flags")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5d808c78d97251af1d3a3e4f253e7d6c39fd871e ]
We met a SCHED_WARN in set_next_buddy():
__warn_printk
set_next_buddy
yield_to_task_fair
yield_to
kvm_vcpu_yield_to [kvm]
...
After a short dig, we found the rq_lock held by yield_to() may not
be exactly the rq that the target task belongs to. There is a race
window against try_to_wake_up().
CPU0 target_task
blocking on CPU1
lock rq0 & rq1
double check task_rq == p_rq, ok
woken to CPU2 (lock task_pi & rq2)
task_rq = rq2
yield_to_task_fair (w/o lock rq2)
In this race window, yield_to() is operating the task w/o the correct
lock. Fix this by taking task pi_lock first.
Fixes: d95f41220065 ("sched: Add yield_to(task, preempt) functionality")
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241231055020.6521-1-dtcccc@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a430d99e349026d53e2557b7b22bd2ebd61fe12a ]
In /proc/schedstat, lb_hot_gained reports the number hot tasks pulled
during load balance. This value is incremented in can_migrate_task()
if the task is migratable and hot. After incrementing the value,
load balancer can still decide not to migrate this task leading to wrong
accounting. Fix this by incrementing stats when hot tasks are detached.
This issue only exists in detach_tasks() where we can decide to not
migrate hot task even if it is migratable. However, in detach_one_task(),
we migrate it unconditionally.
[Swapnil: Handled the case where nr_failed_migrations_hot was not accounted properly and wrote commit log]
Fixes: d31980846f96 ("sched: Move up affinity check to mitigate useless redoing overhead")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: "Gautham R. Shenoy" <gautham.shenoy@amd.com>
Not-yet-signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241220063224.17767-2-swapnil.sapkal@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2a77e4be12cb58bbf774e7c717c8bb80e128b7a4 ]
There are 3 sites using set_next_buddy() and only one is conditional
on NEXT_BUDDY, the other two sites are unconditional; to note:
- yield_to_task()
- cgroup dequeue / pick optimization
However, having NEXT_BUDDY control both the wakeup-preemption and the
picking side of things means its near useless.
Fixes: 147f3efaa241 ("sched/fair: Implement an EEVDF-like scheduling policy")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241129101541.GA33464@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 66951e4860d3c688bfa550ea4a19635b57e00eca ]
Normally dequeue_entities() will continue to dequeue an empty group entity;
except DELAY_DEQUEUE changes things -- it retains empty entities such that they
might continue to compete and burn off some lag.
However, doing this results in update_cfs_group() re-computing the cgroup
weight 'slice' for an empty group, which it (rightly) figures isn't much at
all. This in turn means that the delayed entity is not competing at the
expected weight. Worse, the very low weight causes its lag to be inflated,
which combined with avg_vruntime() using scale_load_down(), leads to artifacts.
As such, don't adjust the weight for empty group entities and let them compete
at their original weight.
Fixes: 152e11f6df29 ("sched/fair: Implement delayed dequeue")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250110115720.GA17405@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 30dd3b13f9de612ef7328ccffcf1a07d0d40ab51 ]
When %SCX_OPS_ENQ_LAST is set and prev->scx.slice != 0,
@prev will be dispacthed into the local DSQ in put_prev_task_scx().
However, pick_task_scx() is executed before put_prev_task_scx(),
so it will not pick @prev.
Set %SCX_RQ_BAL_KEEP in balance_one() to ensure that pick_task_scx()
can pick @prev.
Signed-off-by: Henry Huang <henry.hj@antgroup.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a2a3374c47c428c0edb0bbc693638d4783f81e31 ]
With the consolidation of put_prev_task/set_next_task(), see
commit 436f3eed5c69 ("sched: Combine the last put_prev_task() and the
first set_next_task()"), we are now skipping the transition between
these two functions when the previous and the next tasks are the same.
As a result, the scx idle state of a CPU is updated only when
transitioning to or from the idle thread. While this is generally
correct, it can lead to uneven and inefficient core utilization in
certain scenarios [1].
A typical scenario involves proactive wake-ups: scx_bpf_pick_idle_cpu()
selects and marks an idle CPU as busy, followed by a wake-up via
scx_bpf_kick_cpu(), without dispatching any tasks. In this case, the CPU
continues running the idle thread, returns to idle, but remains marked
as busy, preventing it from being selected again as an idle CPU (until a
task eventually runs on it and releases the CPU).
For example, running a workload that uses 20% of each CPU, combined with
an scx scheduler using proactive wake-ups, results in the following core
utilization:
CPU 0: 25.7%
CPU 1: 29.3%
CPU 2: 26.5%
CPU 3: 25.5%
CPU 4: 0.0%
CPU 5: 25.5%
CPU 6: 0.0%
CPU 7: 10.5%
To address this, refresh the idle state also in pick_task_idle(), during
idle-to-idle transitions, but only trigger ops.update_idle() on actual
state changes to prevent unnecessary updates to the scx scheduler and
maintain balanced state transitions.
With this change in place, the core utilization in the previous example
becomes the following:
CPU 0: 18.8%
CPU 1: 19.4%
CPU 2: 18.0%
CPU 3: 18.7%
CPU 4: 19.3%
CPU 5: 18.9%
CPU 6: 18.7%
CPU 7: 19.3%
[1] https://github.com/sched-ext/scx/pull/1139
Fixes: 7c65ae81ea86 ("sched_ext: Don't call put_prev_task_scx() before picking the next task")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 68e449d849fd50bd5e61d8bd32b3458dbd3a3df6 ]
ops.cpu_release() function, if defined, must be invoked when preempted by
a higher priority scheduler class task. This scenario was skipped in
commit f422316d7466 ("sched_ext: Remove switch_class_scx()"). Let's fix
it.
Fixes: f422316d7466 ("sched_ext: Remove switch_class_scx()")
Signed-off-by: Honglei Wang <jameshongleiwang@126.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6268d5bc10354fc2ab8d44a0cd3b042d49a0417e ]
scx_ops_bypass() iterates all CPUs to re-enqueue all the scx tasks.
For each CPU, it acquires a lock using rq_lock() regardless of whether
a CPU is offline or the CPU is currently running a task in a higher
scheduler class (e.g., deadline). The rq_lock() is supposed to be used
for online CPUs, and the use of rq_lock() may trigger an unnecessary
warning in rq_pin_lock(). Therefore, replace rq_lock() to
raw_spin_rq_lock() in scx_ops_bypass().
Without this change, we observe the following warning:
===== START =====
[ 6.615205] rq->balance_callback && rq->balance_callback != &balance_push_callback
[ 6.615208] WARNING: CPU: 2 PID: 0 at kernel/sched/sched.h:1730 __schedule+0x1130/0x1c90
===== END =====
Fixes: 0e7ffff1b811 ("scx: Fix raciness in scx_ops_bypass()")
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 35bf430e08a18fdab6eb94492a06d9ad14c6179b upstream.
struct bpf_iter_scx_dsq *it maybe not initialized.
If we didn't call scx_bpf_dsq_move_set_vtime and scx_bpf_dsq_move_set_slice
before scx_bpf_dsq_move, it would cause unexpected behaviors:
1. Assign a huge slice into p->scx.slice
2. Assign a invalid vtime into p->scx.dsq_vtime
Signed-off-by: Henry Huang <henry.hj@antgroup.com>
Fixes: 6462dd53a260 ("sched_ext: Compact struct bpf_iter_scx_dsq_kern")
Cc: stable@vger.kernel.org # v6.12
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 18b2093f4598d8ee67a8153badc93f0fa7686b8a upstream.
While adding outer irqsave/restore locking, 0e7ffff1b811 ("scx: Fix raciness
in scx_ops_bypass()") forgot to convert an inner rq_unlock_irqrestore() to
rq_unlock() which could re-enable IRQ prematurely leading to the following
warning:
raw_local_irq_restore() called with IRQs enabled
WARNING: CPU: 1 PID: 96 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x30/0x40
...
Sched_ext: create_dsq (enabling)
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : warn_bogus_irq_restore+0x30/0x40
lr : warn_bogus_irq_restore+0x30/0x40
...
Call trace:
warn_bogus_irq_restore+0x30/0x40 (P)
warn_bogus_irq_restore+0x30/0x40 (L)
scx_ops_bypass+0x224/0x3b8
scx_ops_enable.isra.0+0x2c8/0xaa8
bpf_scx_reg+0x18/0x30
...
irq event stamp: 33739
hardirqs last enabled at (33739): [<ffff8000800b699c>] scx_ops_bypass+0x174/0x3b8
hardirqs last disabled at (33738): [<ffff800080d48ad4>] _raw_spin_lock_irqsave+0xb4/0xd8
Drop the stray _irqrestore().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ihor Solodrai <ihor.solodrai@pm.me>
Link: http://lkml.kernel.org/r/qC39k3UsonrBYD_SmuxHnZIQLsuuccoCrkiqb_BT7DvH945A1_LZwE4g-5Pu9FcCtqZt4lY1HhIPi0homRuNWxkgo1rgP3bkxa0donw8kV4=@pm.me
Fixes: 0e7ffff1b811 ("scx: Fix raciness in scx_ops_bypass()")
Cc: stable@vger.kernel.org # v6.12
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c7f7e9c73178e0e342486fd31e7f363ef60e3f83 ]
dlserver time is accounted when:
- dlserver is active and the dlserver proxies the cfs task.
- dlserver is active but deferred and cfs task runs after being picked
through the normal fair class pick.
dl_server_update is called in two places to make sure that both the
above times are accounted for. But it doesn't check if dlserver is
active or not. Now that we have this dl_server_active flag, we can
consolidate dl_server_update into one place and all we need to check is
whether dlserver is active or not. When dlserver is active there is only
two possible conditions:
- dlserver is deferred.
- cfs task is running on behalf of dlserver.
Fixes: a110a81c52a9 ("sched/deadline: Deferrable dl server")
Signed-off-by: "Vineeth Pillai (Google)" <vineeth@bitbyteword.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk> # ROCK 5B
Link: https://lore.kernel.org/r/20241213032244.877029-2-vineeth@bitbyteword.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
