| Age | Commit message (Collapse) | Author |
|---|
|
Currently, call_rcu_tasks_generic() sets ->percpu_enqueue_shift to
order_base_2(nr_cpu_ids) upon encountering sufficient contention.
This does not shift to use of non-CPU-0 callback queues as intended, but
rather continues using only CPU 0's queue. Although this does provide
some decrease in contention due to spreading work over multiple locks,
it is not the dramatic decrease that was intended.
This commit therefore makes call_rcu_tasks_generic() set
->percpu_enqueue_shift to 0.
Reported-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The ilog2() function can be used to generate a shift count, but it will
generate the same count for a power of two as for one greater than a power
of two. This results in shift counts that are larger than necessary for
systems with a power-of-two number of CPUs because the CPUs are numbered
from zero, so that the maximum CPU number is one less than that power
of two.
This commit therefore substitutes order_base_2(), which appears to have
been designed for exactly this use case.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The pattern "rdp->grpmask & rcu_rnp_online_cpus(rnp)" occurs frequently
in RCU code in order to determine whether rdp->cpu is online from an
RCU perspective. This commit therefore creates an rcu_rdp_cpu_online()
function to replace it.
[ paulmck: Apply kernel test robot unused-variable feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit removes the cpus_read_lock() and cpus_read_unlock() calls
from rcu_barrier(), thus allowing CPUs to come and go during the course
of rcu_barrier() execution. Posting of the ->barrier_head callbacks does
synchronize with portions of RCU's CPU-hotplug notifiers, but these locks
are held for short time periods on both sides. Thus, full CPU-hotplug
operations could both start and finish during the execution of a given
rcu_barrier() invocation.
Additional synchronization is provided by a global ->barrier_lock.
Since the ->barrier_lock is only used during rcu_barrier() execution and
during onlining/offlining a CPU, the contention for this lock should
be low. It might be tempting to make use of a per-CPU lock just on
general principles, but straightforward attempts to do this have the
problems shown below.
Initial state: 3 CPUs present, CPU 0 and CPU1 do not have
any callback and CPU2 has callbacks.
1. CPU0 calls rcu_barrier().
2. CPU1 starts offlining for CPU2. CPU1 calls
rcutree_migrate_callbacks(). rcu_barrier_entrain() is called
from rcutree_migrate_callbacks(), with CPU2's rdp->barrier_lock.
It does not entrain ->barrier_head for CPU2, as rcu_barrier()
on CPU0 hasn't started the barrier sequence (by calling
rcu_seq_start(&rcu_state.barrier_sequence)) yet.
3. CPU0 starts new barrier sequence. It iterates over
CPU0 and CPU1, after acquiring their per-cpu ->barrier_lock
and finds 0 segcblist length. It updates ->barrier_seq_snap
for CPU0 and CPU1 and continues loop iteration to CPU2.
for_each_possible_cpu(cpu) {
raw_spin_lock_irqsave(&rdp->barrier_lock, flags);
if (!rcu_segcblist_n_cbs(&rdp->cblist)) {
WRITE_ONCE(rdp->barrier_seq_snap, gseq);
raw_spin_unlock_irqrestore(&rdp->barrier_lock, flags);
rcu_barrier_trace(TPS("NQ"), cpu, rcu_state.barrier_sequence);
continue;
}
4. rcutree_migrate_callbacks() completes execution on CPU1.
Segcblist len for CPU2 becomes 0.
5. The loop iteration on CPU0, checks rcu_segcblist_n_cbs(&rdp->cblist)
for CPU2 and completes the loop iteration after setting
->barrier_seq_snap.
6. As there isn't any ->barrier_head callback entrained; at
this point, rcu_barrier() in CPU0 returns.
7. The callbacks, which migrated from CPU2 to CPU1, execute.
Straightforward per-CPU locking is also subject to the following race
condition noted by Boqun Feng:
1. CPU0 calls rcu_barrier(), starting a new barrier sequence by invoking
rcu_seq_start() and init_completion(), but does not yet initialize
rcu_state.barrier_cpu_count.
2. CPU1 starts offlining for CPU2, calling rcutree_migrate_callbacks(),
which in turn calls rcu_barrier_entrain() holding CPU2's.
rdp->barrier_lock. It then entrains ->barrier_head for CPU2
and atomically increments rcu_state.barrier_cpu_count, which is
unfortunately not yet initialized to the value 2.
3. The just-entrained RCU callback is invoked. It atomically
decrements rcu_state.barrier_cpu_count and sees that it is
now zero. This callback therefore invokes complete().
4. CPU0 continues executing rcu_barrier(), but is not blocked
by its call to wait_for_completion(). This results in rcu_barrier()
returning before all pre-existing callbacks have been invoked,
which is a bug.
Therefore, synchronization is provided by rcu_state.barrier_lock,
which is also held across the initialization sequence, especially the
rcu_seq_start() and the atomic_set() that sets rcu_state.barrier_cpu_count
to the value 2. In addition, this lock is held when entraining the
rcu_barrier() callback, when deciding whether or not a CPU has callbacks
that rcu_barrier() must wait on, when setting the ->qsmaskinitnext for
incoming CPUs, and when migrating callbacks from a CPU that is going
offline.
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit reworks rcu_barrier() and callback-migration logic to
permit allowing rcu_barrier() to run concurrently with CPU-hotplug
operations. The key trick is for callback migration to check to see if
an rcu_barrier() is in flight, and, if so, enqueue the ->barrier_head
callback on its behalf.
This commit adds synchronization with RCU's CPU-hotplug notifiers. Taken
together, this will permit a later commit to remove the cpus_read_lock()
and cpus_read_unlock() calls from rcu_barrier().
[ paulmck: Updated per kbuild test robot feedback. ]
[ paulmck: Updated per reviews session with Neeraj, Frederic, Uladzislau, and Boqun. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit saves a few lines by checking first for an empty callback
list. If the callback list is empty, then that CPU is taken care of,
regardless of its online or nocb state. Also simplify tracing accordingly
and fold a few lines together.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
If we allow architectures to bring APs online in parallel, then we end
up requiring rcu_cpu_starting() to be reentrant. But currently, the
manipulation of rnp->ofl_seq is not thread-safe.
However, rnp->ofl_seq is also fairly much pointless anyway since both
rcu_cpu_starting() and rcu_report_dead() hold rcu_state.ofl_lock for
fairly much the whole time that rnp->ofl_seq is set to an odd number
to indicate that an operation is in progress.
So drop rnp->ofl_seq completely, and use only rcu_state.ofl_lock.
This has a couple of minor complexities: lockdep will complain when we
take rcu_state.ofl_lock, and currently accepts the 'excuse' of having
an odd value in rnp->ofl_seq. So switch it to an arch_spinlock_t to
avoid that false positive complaint. Since we're killing rnp->ofl_seq
of course that 'excuse' has to be changed too, so make it check for
arch_spin_is_locked(rcu_state.ofl_lock).
There's no arch_spin_lock_irqsave() so we have to manually save and
restore local interrupts around the locking.
At Paul's request based on Neeraj's analysis, make rcu_gp_init not just
wait but *exclude* any CPU online/offline activity, which was fairly
much true already by virtue of it holding rcu_state.ofl_lock.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit allows up to 50,000 callbacks worth of callback-flooding
tests of SRCU. The goal of this change is to exercise Tree SRCU's
ability to transition from SRCU_SIZE_SMALL to SRCU_SIZE_BIG triggered
by callback-queue-time lock contention.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The rcu_torture_fwd_cb_hist() function acquires rcu_fwd_mutex, but is
invoked from rcutorture_oom_notify() function, which hold this same
mutex across this call. This commit fixes the resulting deadlock.
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Oliver Sang <oliver.sang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The second and subsequent forward-progress kthreads loop waiting for
the first forward-progress kthread to start the next test interval.
Unfortunately, if the test ends while one of those kthreads is waiting,
the test will hang. This hang occurs because that wait loop fails to
check for the end of the test. This commit therefore adds an end-of-test
check to that wait loop.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Back when only one rcutorture kthread could do forward-progress testing,
it was just fine for rcu_fwd_cb_nodelay to be a non-atomic bool. It was
set at the start of forward-progress testing and cleared at the end.
But now that there are multiple threads, the value can be cleared while
one of the threads is still doing forward-progress testing. This commit
therefore makes rcu_fwd_cb_nodelay be an atomic counter, replacing the
WRITE_ONCE() operations with atomic_inc() and atomic_dec().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds a few pr_alert() calls to rcutorture's forward-progress
testing in order to better diagnose shutdown-time hangs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The various ->cb_barrier() functions, for example, rcu_barrier(),
sometimes cause rcutorture hangs. But currently, the last console
message is the unenlightening "Stopping rcu_torture_stats". This commit
therefore prints a message of the form "rcu_torture_cleanup: Invoking
rcu_barrier+0x0/0x1e0()" to help point people in the right direction.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
When the rcutree.use_softirq kernel boot parameter is set to zero, all
RCU_SOFTIRQ processing is carried out by the per-CPU rcuc kthreads.
If these kthreads are being starved, quiescent states will not be
reported, which in turn means that the grace period will not end, which
can in turn trigger RCU CPU stall warnings. This commit therefore dumps
stack traces of stalled CPUs' rcuc kthreads, which can help identify
what is preventing those kthreads from running.
Suggested-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Reviewed-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently rcu_preempt_deferred_qs_irqrestore() releases rnp->boost_mtx
before reporting the expedited quiescent state. Under heavy real-time
load, this can result in this function being preempted before the
quiescent state is reported, which can in turn prevent the expedited grace
period from completing. Tim Murray reports that the resulting expedited
grace periods can take hundreds of milliseconds and even more than one
second, when they should normally complete in less than a millisecond.
This was fine given that there were no particular response-time
constraints for synchronize_rcu_expedited(), as it was designed
for throughput rather than latency. However, some users now need
sub-100-millisecond response-time constratints.
This patch therefore follows Neeraj's suggestion (seconded by Tim and
by Uladzislau Rezki) of simply reversing the two operations.
Reported-by: Tim Murray <timmurray@google.com>
Reported-by: Joel Fernandes <joelaf@google.com>
Reported-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Tested-by: Tim Murray <timmurray@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
When CONFIG_PREEMPT_RT=y, the rcutree.kthread_prio command-line
parameter signals initialization code to boost the priority of rcuc
callbacks to the designated value. With the additional
CONFIG_RCU_NOCB_CPU=y configuration and an additional rcu_nocbs
command-line parameter, the callbacks on the listed cores are
offloaded to new rcuop kthreads that are not pinned to the cores whose
post-grace-period work is performed. While the rcuop kthreads perform
the same function as the rcuc kthreads they offload, the kthread_prio
parameter only boosts the priority of the rcuc kthreads. Fix this
inconsistency by elevating rcuop kthreads to the same priority as the rcuc
kthreads.
Signed-off-by: Alison Chaiken <achaiken@aurora.tech>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The priority of RCU grace period threads is set to kthread_prio when
they are launched from rcu_spawn_gp_kthread(). The same is not true
of rcu_spawn_one_nocb_kthread(). Accordingly, add priority elevation
to rcu_spawn_one_nocb_kthread().
Signed-off-by: Alison Chaiken <achaiken@aurora.tech>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Move the bounds-check of the kthread_prio cmdline parameter to a new
function in order to faciliate a different callsite.
Signed-off-by: Alison Chaiken <achaiken@aurora.tech>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The per-CPU "rcuc" kthreads are used only by kernels booted with
rcutree.use_softirq=0, but they are nevertheless unconditionally created
by kernels built with CONFIG_RCU_BOOST=y. This results in "rcuc"
kthreads being created that are never actually used. This commit
therefore refrains from creating these kthreads unless the kernel
is actually booted with rcutree.use_softirq=0.
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
When multiple CPUs in the same nocb gp/cb group concurrently
come online, they might try to concurrently create the same
rcuog kthread. Fix this by using nocb gp CPU's spawn mutex to
provide mutual exclusion for the rcuog kthread creation code.
[ paulmck: Whitespace fixes per kernel test robot feedback. ]
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The boost_starttime shared variable has conflicting unmarked C-language
accesses, which are dangerous at best. This commit therefore adds
appropriate marking. This was found by KCSAN.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds a READ_ONCE() to an access to the rcu_node structure's
->expmask field to prevent compiler mischief. Detected by KCSAN.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
For PREEMPT_RCU, the rcu_exp_handler() function checks
whether the current CPU is in idle, by calling
rcu_dynticks_curr_cpu_in_eqs(). However, rcu_exp_handler()
is called in IPI handler context. So, it should be checking
the idle context using rcu_is_cpu_rrupt_from_idle(). Fix this
by using rcu_is_cpu_rrupt_from_idle() instead of
rcu_dynticks_curr_cpu_in_eqs(). Non-preempt configuration
already uses the correct check.
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The ->percpu_enqueue_shift field is used to map from the running CPU
number to the index of the corresponding callback list. This mapping
can change at runtime in response to varying callback load, resulting
in varying levels of contention on the callback-list locks.
Unfortunately, the initial value of this field is correct only if the
system happens to have a power-of-two number of CPUs, otherwise the
callbacks from the high-numbered CPUs can be placed into the callback list
indexed by 1 (rather than 0), and those index-1 callbacks will be ignored.
This can result in soft lockups and hangs.
This commit therefore corrects this mapping, adding one to this shift
count as needed for systems having odd numbers of CPUs.
Fixes: 7a30871b6a27 ("rcu-tasks: Introduce ->percpu_enqueue_shift for dynamic queue selection")
Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Merge misc updates from Andrew Morton:
"146 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak,
dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap,
memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb,
userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp,
ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and
damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits)
mm/damon: hide kernel pointer from tracepoint event
mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log
mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging
mm/damon/dbgfs: remove an unnecessary variable
mm/damon: move the implementation of damon_insert_region to damon.h
mm/damon: add access checking for hugetlb pages
Docs/admin-guide/mm/damon/usage: update for schemes statistics
mm/damon/dbgfs: support all DAMOS stats
Docs/admin-guide/mm/damon/reclaim: document statistics parameters
mm/damon/reclaim: provide reclamation statistics
mm/damon/schemes: account how many times quota limit has exceeded
mm/damon/schemes: account scheme actions that successfully applied
mm/damon: remove a mistakenly added comment for a future feature
Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts
Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning
Docs/admin-guide/mm/damon/usage: remove redundant information
Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks
mm/damon: convert macro functions to static inline functions
mm/damon: modify damon_rand() macro to static inline function
mm/damon: move damon_rand() definition into damon.h
...
|
|
Replace kthread_create_on_node/kthread_bind/wake_up_process() with
kthread_run_on_cpu() to simplify the code.
Link: https://lkml.kernel.org/r/20211022025711.3673-5-caihuoqing@baidu.com
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Cc: Bernard Metzler <bmt@zurich.ibm.com>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
'fixes.2021.11.30c', 'nocb.2021.12.09a', 'nolibc.2021.11.30c', 'tasks.2021.12.09a', 'torture.2021.12.07a' and 'torturescript.2021.11.30c' into HEAD
doc.2021.11.30c: Documentation updates.
exp.2021.12.07a: Expedited-grace-period fixes.
fastnohz.2021.11.30c: Remove CONFIG_RCU_FAST_NO_HZ.
fixes.2021.11.30c: Miscellaneous fixes.
nocb.2021.12.09a: No-CB CPU updates.
nolibc.2021.11.30c: Tiny in-kernel library updates.
tasks.2021.12.09a: RCU-tasks updates, including update-side scalability.
torture.2021.12.07a: Torture-test in-kernel module updates.
torturescript.2021.11.30c: Torture-test scripting updates.
|
|
The rcu_spawn_one_nocb_kthread() function is called only from
rcu_spawn_cpu_nocb_kthread(). Therefore, inline the former into
the latter, saving a few lines of code.
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Allow the rcu_nocbs kernel parameter to be specified just by itself,
without specifying any CPUs. This allows systems administrators to use
"rcu_nocbs" to specify that none of the CPUs are to be offloaded at boot
time, but than any of them may be offloaded at runtime via cpusets.
In contrast, if the "rcu_nocbs" or "nohz_full" kernel parameters are not
specified at all, then not only are none of the CPUs offloaded at boot,
none of them can be offloaded at runtime, either.
While in the area, modernize the description of the "rcuo" kthreads'
naming scheme.
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
In order to be able to (de-)offload any CPU using cpusets in the future,
create the NOCB data structures for all possible CPUs. For now this is
done only as long as the "rcu_nocbs=" or "nohz_full=" kernel parameters
are passed to avoid the unnecessary overhead for most users.
Note that the rcuog and rcuoc kthreads are not created until at least
one of the corresponding CPUs comes online. This approach avoids the
creation of excess kthreads when firmware lies about the number of CPUs
present on the system.
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently cpumask_available() is used to prevent from unwanted NOCB
initialization. However if neither "rcu_nocbs=" nor "nohz_full="
parameters are passed to a kernel built with CONFIG_CPUMASK_OFFSTACK=n,
the initialization path is still taken, running through all sorts of
needless operations and iterations on an empty cpumask.
Fix this by relying on a real initialization state instead. This also
optimizes kthread creation, preventing needless iteration over all online
CPUs when the kernel is booted without any offloaded CPUs.
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
In order to be able to toggle the offloaded state from cpusets, a nocb
kthread will need to be created for all possible CPUs whenever either
of the "rcu_nocbs=" or "nohz_full=" parameters are specified.
Therefore, the nocb_cb_wait() kthread must be prepared to start running
on a de-offloaded rdp. To accomplish this, simply move the sleeping
condition to the beginning of the nocb_cb_wait() function, which prevents
this kthread from attempting to invoke callbacks before the corresponding
CPU is offloaded.
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The nocb_gp_wait() function iterates over all CPUs in its group,
including even those CPUs that have been de-offloaded. This is of
course suboptimal, especially if none of the CPUs within the group are
currently offloaded. This will become even more of a problem once a
nocb kthread is created for all possible CPUs.
Therefore use a standard double linked list to link all the offloaded
rcu_data structures and safely add or delete these structure as we
offload or de-offload them, respectively.
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
By default, when lock contention is encountered, the RCU Tasks flavors
of RCU switch to using per-CPU queueing. However, if the callback
flood ends, per-CPU queueing continues to be used, which introduces
significant additional overhead, especially for callback invocation,
which fans out a series of workqueue handlers.
This commit therefore switches back to single-queue operation if at the
beginning of a grace period there are very few callbacks. The definition
of "very few" is set by the rcupdate.rcu_task_collapse_lim module
parameter, which defaults to 10. This switch happens in two phases,
with the first phase causing future callbacks to be enqueued on CPU 0's
queue, but with all queues continuing to be checked for grace periods
and callback invocation. The second phase checks to see if an RCU grace
period has elapsed and if all remaining RCU-Tasks callbacks are queued
on CPU 0. If so, only CPU 0 is checked for future grace periods and
callback operation.
Of course, the return of contention anywhere during this process will
result in returning to per-CPU callback queueing.
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Decreasing the number of callback queues is a bit tricky because it
is necessary to handle callbacks that were queued before the number of
queues decreased, but which were not ready to invoke until afterwards.
This commit takes a first step in this direction by maintaining a separate
->percpu_dequeue_lim to control callback dequeueing, in addition to the
existing ->percpu_enqueue_lim which now controls only enqueueing.
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The rcupdate.rcu_task_enqueue_lim module parameter allows system
administrators to tune the number of callback queues used by the RCU
Tasks flavors. However if callback storms are infrequent, it would
be better to operate with a single queue on a given system unless and
until that system actually needed more queues. Systems not needing
more queues can then avoid the overhead of checking the extra queues
and especially avoid the overhead of fanning workqueue handlers out to
all CPUs to invoke callbacks.
This commit therefore switches to using all the CPUs' callback queues if
call_rcu_tasks_generic() encounters too much lock contention. The amount
of lock contention to tolerate defaults to 100 contended lock acquisitions
per jiffy, and can be adjusted using the new rcupdate.rcu_task_contend_lim
module parameter.
Such switching is undertaken only if the rcupdate.rcu_task_enqueue_lim
module parameter is negative, which is its default value (-1).
This allows savvy systems administrators to set the number of queues
to some known good value and to not have to worry about the kernel doing
any second guessing.
[ paulmck: Apply feedback from Guillaume Tucker and kernelci. ]
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
If the caller of of call_rcu_tasks(), call_rcu_tasks_rude(),
or call_rcu_tasks_trace() holds a raw spinlock, and then if
call_rcu_tasks_generic() determines that the grace-period kthread must
be awakened, then the wakeup might acquire a normal spinlock while a
raw spinlock is held. This results in lockdep splats when the
kernel is built with CONFIG_PROVE_RAW_LOCK_NESTING=y.
This commit therefore defers the wakeup using irq_work_queue().
It would be nice to directly invoke wakeup when a raw spinlock is not
held, but there is currently no way to check for this in all kernels.
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit converts the unconditional raw_spin_lock_rcu_node() lock
acquisition in call_rcu_tasks_generic() to a trylock followed by an
unconditional acquisition if the trylock fails. If the trylock fails,
the failure is counted, but the count is reset to zero on each new jiffy.
This statistic will be used to determine when to move from a single
callback queue to per-CPU callback queues.
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds a rcupdate.rcu_task_enqueue_lim module parameter that
sets the initial number of callback queues to use for the RCU Tasks
family of RCU implementations. This parameter allows testing of various
fanout values.
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, rcu_barrier_tasks(), rcu_barrier_tasks_rude(),
and rcu_barrier_tasks_trace() simply invoke the corresponding
synchronize_rcu_tasks*() function. This works because there is only
one callback queue.
However, there will soon be multiple callback queues. This commit
therefore scans the queues currently in use, entraining a callback on
each non-empty queue. Sequence numbers and reference counts are used
to synchronize this process in a manner similar to the approach taken
by rcu_barrier().
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
If there is a flood of callbacks, it is necessary to put multiple
CPUs to work invoking those callbacks. This commit therefore uses a
workqueue-flooding approach to parallelize RCU Tasks callback execution.
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds a rcu_tasks_invoke_cbs() function that invokes all
ready callbacks on all of the per-CPU lists that are currently in use.
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds a rcu_tasks_need_gpcb() function that returns an
indication of whether another grace period is required, and if no grace
period is required, whether there are callbacks that need to be invoked.
The function scans all per-CPU lists currently in use.
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds a ->percpu_enqueue_lim field to the rcu_tasks structure.
This field contains two to the power of the ->percpu_enqueue_shift
field, easing construction of iterators over the per-CPU queues that
might contain RCU Tasks callbacks. Such iterators will be introduced
in later commits.
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
On RCU tasks trace stall, inspect the RCU-tasks-trace specific
states of stalled task in locked down state, using try_invoke_
on_locked_down_task(), to get reliable trc state of a non-running
stalled task.
This was tested using the following command:
tools/testing/selftests/rcutorture/bin/kvm.sh --cpus 8 --configs TRACE01 \
--bootargs "rcutorture.torture_type=tasks-tracing rcutorture.stall_cpu=10 \
rcutorture.stall_cpu_block=1 rcupdate.rcu_task_stall_timeout=100" --trust-make
As expected, this produced the following console output for running and
sleeping tasks.
[ 21.520291] INFO: rcu_tasks_trace detected stalls on tasks:
[ 21.521292] P85: ... nesting: 1N cpu: 2
[ 21.521966] task:rcu_torture_sta state:D stack:15080 pid: 85 ppid: 2
flags:0x00004000
[ 21.523384] Call Trace:
[ 21.523808] __schedule+0x273/0x6e0
[ 21.524428] schedule+0x35/0xa0
[ 21.524971] schedule_timeout+0x1ed/0x270
[ 21.525690] ? del_timer_sync+0x30/0x30
[ 21.526371] ? rcu_torture_writer+0x720/0x720
[ 21.527106] rcu_torture_stall+0x24a/0x270
[ 21.527816] kthread+0x115/0x140
[ 21.528401] ? set_kthread_struct+0x40/0x40
[ 21.529136] ret_from_fork+0x22/0x30
[ 21.529766] 1 holdouts
[ 21.632300] INFO: rcu_tasks_trace detected stalls on tasks:
[ 21.632345] rcu_torture_stall end.
[ 21.633293] P85: .
[ 21.633294] task:rcu_torture_sta state:R running task stack:15080 pid:
85 ppid: 2 flags:0x00004000
[ 21.633299] Call Trace:
[ 21.633301] ? vprintk_emit+0xab/0x180
[ 21.633306] ? vprintk_emit+0x11a/0x180
[ 21.633308] ? _printk+0x4d/0x69
[ 21.633311] ? __default_send_IPI_shortcut+0x1f/0x40
[ paulmck: Update to new v5.16 task_call_func() name. ]
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit renames the rcu_tasks_percpu structure's ->cbs_pcpu_lock
to ->lock and then uses spin_lock_rcu_node() and friends to acquire and
release this lock, preparing for upcoming commits that will spread the
grace-period process across multiple CPUs and kthreads.
[ paulmck: Apply feedback from kernel test robot. ]
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
With the addition of multiple callback-flood kthreads, the maximum number
of callbacks from any one of those kthreads is reported in the rcutorture
run summary. This commit changes this to report the sum of each kthread's
maximum number of callbacks in a given callback-flooding episode.
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The RCU tasks flavors of RCU now need concurrent callback flooding to
test their ability to switch between single-queue mode and per-CPU queue
mode, but their lack of heavy-duty forward-progress features rules out
the use of rcutorture's current callback-flooding code. This commit
therefore provides the ability to limit the intensity of the callback
floods using a new ->cbflood_max field in the rcu_operations structure.
When this field is zero, there is no limit, otherwise, each callback-flood
kthread allocates at most ->cbflood_max callbacks.
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit converts the rcutorture.fwd_progress module parameter from
bool to int, so that it specifies the number of callback-flood kthreads.
Values less than zero specify one kthread per CPU, however, the number of
kthreads executing concurrently is limited to the number of online CPUs.
This commit also reverse the order of the need-resched and callback-flood
operations to cause the callback flooding to happen more nearly at the
same time.
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
