| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 04e613ded8c26489b3e0f9101b44462f780d1a35 ]
Commit ce3d31ad3cac ("arm64/smp: Move rcu_cpu_starting() earlier") ensured
that RCU is informed early about incoming CPUs that might end up calling
into printk() before they are online. However, if such a CPU fails the
early CPU feature compatibility checks in check_local_cpu_capabilities(),
then it will be powered off or parked without informing RCU, leading to
an endless stream of stalls:
| rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
| rcu: 2-O...: (0 ticks this GP) idle=002/1/0x4000000000000000 softirq=0/0 fqs=2593
| (detected by 0, t=5252 jiffies, g=9317, q=136)
| Task dump for CPU 2:
| task:swapper/2 state:R running task stack: 0 pid: 0 ppid: 1 flags:0x00000028
| Call trace:
| ret_from_fork+0x0/0x30
Ensure that the dying CPU invokes rcu_report_dead() prior to being powered
off or parked.
Cc: Qian Cai <cai@redhat.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Suggested-by: Qian Cai <cai@redhat.com>
Link: https://lore.kernel.org/r/20201105222242.GA8842@willie-the-truck
Link: https://lore.kernel.org/r/20201106103602.9849-3-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 4230e2deaa484b385aa01d598b2aea8e7f2660a6 upstream.
Some architectures assume that the stopped CPUs don't make function calls
to traceable functions when they are in the stopped state. See also commit
cb9d7fd51d9f ("watchdog: Mark watchdog touch functions as notrace").
Violating this assumption causes kernel crashes when switching tracer on
RISC-V.
Mark rcu_momentary_dyntick_idle() and stop_machine_yield() notrace to
prevent this.
Fixes: 4ecf0a43e729 ("processor: get rid of cpu_relax_yield")
Fixes: 366237e7b083 ("stop_machine: Provide RCU quiescent state in multi_cpu_stop()")
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201021073839.43935-1-zong.li@sifive.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9c39245382de4d52a122641952900709d4a9950b ]
On callback overload, it is necessary to quickly detect idle CPUs,
and rcu_gp_fqs_check_wake() checks for this condition. Unfortunately,
the code following the call to this function does not repeat this check,
which means that in reality no actual quiescent-state forcing, instead
only a couple of quick and pointless wakeups at the beginning of the
grace period.
This commit therefore adds a check for the RCU_GP_FLAG_OVLD flag in
the post-wakeup "if" statement in rcu_gp_fqs_loop().
Fixes: 1fca4d12f4637 ("rcu: Expedite first two FQS scans under callback-overload conditions")
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Fix this link error:
ERROR: modpost: "rcu_idle_enter" [drivers/acpi/processor.ko] undefined!
ERROR: modpost: "rcu_idle_exit" [drivers/acpi/processor.ko] undefined!
when CONFIG_ACPI_PROCESSOR is built as module. PeterZ says that in light
of ARM needing those soon too, they should simply be exported.
Fixes: 1fecfdbb7acc ("ACPI: processor: Take over RCU-idle for C3-BM idle")
Reported-by: Sven Joachim <svenjoac@gmx.de>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Paul E. McKenney <paulmckrcu@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Patch series "kasan: memorize and print call_rcu stack", v8.
This patchset improves KASAN reports by making them to have call_rcu()
call stack information. It is useful for programmers to solve
use-after-free or double-free memory issue.
The KASAN report was as follows(cleaned up slightly):
BUG: KASAN: use-after-free in kasan_rcu_reclaim+0x58/0x60
Freed by task 0:
kasan_save_stack+0x24/0x50
kasan_set_track+0x24/0x38
kasan_set_free_info+0x18/0x20
__kasan_slab_free+0x10c/0x170
kasan_slab_free+0x10/0x18
kfree+0x98/0x270
kasan_rcu_reclaim+0x1c/0x60
Last call_rcu():
kasan_save_stack+0x24/0x50
kasan_record_aux_stack+0xbc/0xd0
call_rcu+0x8c/0x580
kasan_rcu_uaf+0xf4/0xf8
Generic KASAN will record the last two call_rcu() call stacks and print up
to 2 call_rcu() call stacks in KASAN report. it is only suitable for
generic KASAN.
This feature considers the size of struct kasan_alloc_meta and
kasan_free_meta, we try to optimize the structure layout and size, lets it
get better memory consumption.
[1]https://bugzilla.kernel.org/show_bug.cgi?id=198437
[2]https://groups.google.com/forum/#!searchin/kasan-dev/better$20stack$20traces$20for$20rcu%7Csort:date/kasan-dev/KQsjT_88hDE/7rNUZprRBgAJ
This patch (of 4):
This feature will record the last two call_rcu() call stacks and prints up
to 2 call_rcu() call stacks in KASAN report.
When call_rcu() is called, we store the call_rcu() call stack into slub
alloc meta-data, so that the KASAN report can print rcu stack.
[1]https://bugzilla.kernel.org/show_bug.cgi?id=198437
[2]https://groups.google.com/forum/#!searchin/kasan-dev/better$20stack$20traces$20for$20rcu%7Csort:date/kasan-dev/KQsjT_88hDE/7rNUZprRBgAJ
[walter-zh.wu@mediatek.com: build fix]
Link: http://lkml.kernel.org/r/20200710162401.23816-1-walter-zh.wu@mediatek.com
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: http://lkml.kernel.org/r/20200710162123.23713-1-walter-zh.wu@mediatek.com
Link: http://lkml.kernel.org/r/20200601050847.1096-1-walter-zh.wu@mediatek.com
Link: http://lkml.kernel.org/r/20200601050927.1153-1-walter-zh.wu@mediatek.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
'kfree_rcu.2020.06.29a', 'rcu-tasks.2020.06.29a', 'scale.2020.06.29a', 'srcu.2020.06.29a' and 'torture.2020.06.29a' into HEAD
doc.2020.06.29a: Documentation updates.
fixes.2020.06.29a: Miscellaneous fixes.
kfree_rcu.2020.06.29a: kfree_rcu() updates.
rcu-tasks.2020.06.29a: RCU Tasks updates.
scale.2020.06.29a: Read-side scalability tests.
srcu.2020.06.29a: SRCU updates.
torture.2020.06.29a: Torture-test updates.
|
|
Update the kvfree_call_rcu() function with head-less support.
This allows RCU to reclaim objects without an embedded rcu_head.
tree-RCU:
We introduce two chains of arrays to store SLAB-backed and vmalloc
pointers, each. Storage in either of these arrays does not require
embedding an rcu_head within the object.
Maintaining the arrays may become impossible due to high memory
pressure. For such cases there is an emergency path. Objects with
rcu_head inside are just queued on a backup rcu_head list. Later on
that list is drained. As for the head-less variant, as the current
context can sleep, the following emergency measures are applied:
a) Synchronously wait until a grace period has elapsed.
b) Call kvfree().
tiny-RCU:
For double argument calls, there are no new changes in behavior. For
single argument call, kvfree() is directly inlined on the current
stack after a synchronize_rcu() call. Note that for tiny-RCU, any
call to synchronize_rcu() is actually a quiescent state, therefore
it does nothing.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Co-developed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The following changes are introduced:
1. Rename rcu_invoke_kfree_callback() to rcu_invoke_kvfree_callback(),
as well as the associated trace events, so the rcu_kfree_callback(),
becomes rcu_kvfree_callback(). The reason is to be aligned with kvfree()
notation.
2. Rename __is_kfree_rcu_offset to __is_kvfree_rcu_offset. All RCU
paths use kvfree() now instead of kfree(), thus rename it.
3. Rename kfree_call_rcu() to the kvfree_call_rcu(). The reason is,
it is capable of freeing vmalloc() memory now. Do the same with
__kfree_rcu() macro, it becomes __kvfree_rcu(), the goal is the
same.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Co-developed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
To do so, we use an array of kvfree_rcu_bulk_data structures.
It consists of two elements:
- index number 0 corresponds to slab pointers.
- index number 1 corresponds to vmalloc pointers.
Keeping vmalloc pointers separated from slab pointers makes
it possible to invoke the right freeing API for the right
kind of pointer.
It also prepares us for future headless support for vmalloc
and SLAB objects. Such objects cannot be queued on a linked
list and are instead directly into an array.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Co-developed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
In order to reduce the dynamic need for pages in kfree_rcu(),
pre-allocate a configurable number of pages per CPU and link
them in a list. When kfree_rcu() reclaims objects, the object's
container page is cached into a list instead of being released
to the low-level page allocator.
Such an approach provides O(1) access to free pages while also
reducing the number of requests to the page allocator. It also
makes the kfree_rcu() code to have free pages available during
a low memory condition.
A read-only sysfs parameter (rcu_min_cached_objs) reflects the
minimum number of allowed cached pages per CPU.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The per-CPU variable is initialized at runtime in
kfree_rcu_batch_init(). This function is invoked before
'rcu_scheduler_active' is set to 'RCU_SCHEDULER_RUNNING'.
After the initialisation, '->initialized' is to true.
The raw_spin_lock is only acquired if '->initialized' is
set to true. The worqueue item is only used if 'rcu_scheduler_active'
set to RCU_SCHEDULER_RUNNING which happens after initialisation.
Use a static initializer for krc.lock and remove the runtime
initialisation of the lock. Since the lock can now be always
acquired, remove the '->initialized' check.
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Introduce helpers to lock and unlock per-cpu "kfree_rcu_cpu"
structures. That will make kfree_call_rcu() more readable
and prevent programming errors.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
We can simplify KFREE_BULK_MAX_ENTR macro and get rid of
magic numbers which were used to make the structure to be
exactly one page.
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
kfree_rcu()'s debug_objects logic uses the address of the object's
embedded rcu_head to queue/unqueue. Instead of this, make use of the
object's address itself as preparation for future headless kfree_rcu()
support.
Reviewed-by: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
It is possible that one of the channels cannot be detached
because its free channel is busy and previously queued data
has not been processed yet. On the other hand, another
channel can be successfully detached causing the monitor
work to stop.
Prevent that by rescheduling the monitor work if there are
any channels in the pending state after a detach attempt.
Fixes: 34c881745549e ("rcu: Support kfree_bulk() interface in kfree_rcu()")
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
To keep the kfree_rcu() code working in purely atomic sections on RT,
such as non-threaded IRQ handlers and raw spinlock sections, avoid
calling into the page allocator which uses sleeping locks on RT.
In fact, even if the caller is preemptible, the kfree_rcu() code is
not, as the krcp->lock is a raw spinlock.
Calling into the page allocator is optional and avoiding it should be
Ok, especially with the page pre-allocation support in future patches.
Such pre-allocation would further avoid the a need for a dynamically
allocated page in the first place.
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Uladzislau Rezki <urezki@gmail.com>
Co-developed-by: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
On PREEMPT_RT kernels, the krcp spinlock gets converted to an rt-mutex
and causes kfree_rcu() callers to sleep. This makes it unusable for
callers in purely atomic sections such as non-threaded IRQ handlers and
raw spinlock sections. Fix it by converting the spinlock to a raw
spinlock.
Vetting all code paths, there is no reason to believe that the raw
spinlock will hurt RT latencies as it is not held for a long time.
Cc: bigeasy@linutronix.de
Cc: Uladzislau Rezki <urezki@gmail.com>
Reviewed-by: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
There are some kernel-doc warnings:
./kernel/rcu/tree.c:2915: warning: Function parameter or member 'count' not described in 'kfree_rcu_cpu'
This commit therefore moves the comment for "count" to the kernel-doc
markup.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Fix kernel-doc warning:
../kernel/rcu/tree.c:959: warning: Excess function parameter 'irq' description in 'rcu_nmi_enter'
Fixes: cf7614e13c8f ("rcu: Refactor rcu_{nmi,irq}_{enter,exit}()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The count and scan can be separated in time, and there is a fair chance
that all work is already done when the scan starts, which might in turn
result in a needless retry. This commit therefore avoids this retry by
returning SHRINK_STOP.
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The objtool complains about the call to rcu_cleanup_after_idle() from
rcu_nmi_enter(), so this commit adds instrumentation_begin() before that
call and instrumentation_end() after it.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit converts the long-standing schedule_timeout_interruptible()
and schedule_timeout_uninterruptible() calls used by RCU's grace-period
kthread to schedule_timeout_idle(). This conversion avoids polluting
the load-average with RCU-related sleeping.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds a count of the callbacks invoked to the per-CPU rcu_data
structure. This count is printed by the show_rcu_gp_kthreads() that
is invoked by rcutorture and the RCU CPU stall-warning code. It is also
intended for use by drgn.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
There is only 1 bit set in mask, which means that the only difference
between oldmask and the new one will be at the position where the bit is
set in mask. This commit therefore updates rcu_state.ncpus by checking
whether the bit in mask is already set in rnp->expmaskinitnext.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
A KCSAN build revealed we have explicit annoations through atomic_*()
usage, switch to arch_atomic_*() for the respective functions.
vmlinux.o: warning: objtool: rcu_nmi_exit()+0x4d: call to __kcsan_check_access() leaves .noinstr.text section
vmlinux.o: warning: objtool: rcu_dynticks_eqs_enter()+0x25: call to __kcsan_check_access() leaves .noinstr.text section
vmlinux.o: warning: objtool: rcu_nmi_enter()+0x4f: call to __kcsan_check_access() leaves .noinstr.text section
vmlinux.o: warning: objtool: rcu_dynticks_eqs_exit()+0x2a: call to __kcsan_check_access() leaves .noinstr.text section
vmlinux.o: warning: objtool: __rcu_is_watching()+0x25: call to __kcsan_check_access() leaves .noinstr.text section
Additionally, without the NOP in instrumentation_begin(), objtool would
not detect the lack of the 'else instrumentation_begin();' branch in
rcu_nmi_enter().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Current RCU hard relies on smp_call_function() callbacks running from
interrupt context. A pending optimization is going to break that, it
will allow idle CPUs to run the callbacks from the idle loop. This
avoids raising the IPI on the requesting CPU and avoids handling an
exception on the receiving CPU.
Change rcu_is_cpu_rrupt_from_idle() to also accept task context,
provided it is the idle task.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Link: https://lore.kernel.org/r/20200527171236.GC706495@hirez.programming.kicks-ass.net
|
|
Provide a debug check which can be invoked from exception return to kernel
mode before an attempt is made to schedule. Warn if RCU is not ready for
this.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20200521202117.089709607@linutronix.de
|
|
There will likely be exception handlers that can sleep, which rules
out the usual approach of invoking rcu_nmi_enter() on entry and also
rcu_nmi_exit() on all exit paths. However, the alternative approach of
just not calling anything can prevent RCU from coaxing quiescent states
from nohz_full CPUs that are looping in the kernel: RCU must instead
IPI them explicitly. It would be better to enable the scheduler tick
on such CPUs to interact with RCU in a lighter-weight manner, and this
enabling is one of the things that rcu_nmi_enter() currently does.
What is needed is something that helps RCU coax quiescent states while
not preventing subsequent sleeps. This commit therefore splits out the
nohz_full scheduler-tick enabling from the rest of the rcu_nmi_enter()
logic into a new function named rcu_irq_enter_check_tick().
[ tglx: Renamed the function and made it a nop when context tracking is off ]
[ mingo: Fixed a CONFIG_NO_HZ_FULL assumption, harmonized and fixed all the
comment blocks and cleaned up rcu_nmi_enter()/exit() definitions. ]
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200521202116.996113173@linutronix.de
|
|
Same as rcu_is_watching() but without the preempt_disable/enable() pair
inside the function. It is merked noinstr so it ends up in the
non-instrumentable text section.
This is useful for non-preemptible code especially in the low level entry
section. Using rcu_is_watching() there results in a call to the
preempt_schedule_notrace() thunk which triggers noinstr section warnings in
objtool.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200512213810.518709291@linutronix.de
|
|
Interrupts and exceptions invoke rcu_irq_enter() on entry and need to
invoke rcu_irq_exit() before they either return to the interrupted code or
invoke the scheduler due to preemption.
The general assumption is that RCU idle code has to have preemption
disabled so that a return from interrupt cannot schedule. So the return
from interrupt code invokes rcu_irq_exit() and preempt_schedule_irq().
If there is any imbalance in the rcu_irq/nmi* invocations or RCU idle code
had preemption enabled then this goes unnoticed until the CPU goes idle or
some other RCU check is executed.
Provide rcu_irq_exit_preempt() which can be invoked from the
interrupt/exception return code in case that preemption is enabled. It
invokes rcu_irq_exit() and contains a few sanity checks in case that
CONFIG_PROVE_RCU is enabled to catch such issues directly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134904.364456424@linutronix.de
|
|
The rcu_nmi_enter_common() and rcu_nmi_exit_common() functions take an
"irq" parameter that indicates whether these functions have been invoked from
an irq handler (irq==true) or an NMI handler (irq==false).
However, recent changes have applied notrace to a few critical functions
such that rcu_nmi_enter_common() and rcu_nmi_exit_common() many now rely on
in_nmi(). Note that in_nmi() works no differently than before, but rather
that tracing is now prohibited in code regions where in_nmi() would
incorrectly report NMI state.
Therefore remove the "irq" parameter and inline rcu_nmi_enter_common() and
rcu_nmi_exit_common() into rcu_nmi_enter() and rcu_nmi_exit(),
respectively.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Link: https://lkml.kernel.org/r/20200505134101.617130349@linutronix.de
|
|
These functions are invoked from context tracking and other places in the
low level entry code. Move them into the .noinstr.text section to exclude
them from instrumentation.
Mark the places which are safe to invoke traceable functions with
instrumentation_begin/end() so objtool won't complain.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lkml.kernel.org/r/20200505134100.575356107@linutronix.de
|
|
'rcu-tasks.2020.04.27a', 'stall.2020.04.27a' and 'torture.2020.05.07a' into HEAD
fixes.2020.04.27a: Miscellaneous fixes.
kfree_rcu.2020.04.27a: Changes related to kfree_rcu().
rcu-tasks.2020.04.27a: Addition of new RCU-tasks flavors.
stall.2020.04.27a: RCU CPU stall-warning updates.
torture.2020.05.07a: Torture-test updates.
|
|
This commit provides an rcutorture.stall_gp_kthread module parameter
to allow rcutorture to starve the grace-period kthread. This allows
testing the code that detects such starvation.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Systems running CPU-bound real-time task do not want IPIs sent to CPUs
executing nohz_full userspace tasks. Battery-powered systems don't
want IPIs sent to idle CPUs in low-power mode. Unfortunately, RCU tasks
trace can and will send such IPIs in some cases.
Both of these situations occur only when the target CPU is in RCU
dyntick-idle mode, in other words, when RCU is not watching the
target CPU. This suggests that CPUs in dyntick-idle mode should use
memory barriers in outermost invocations of rcu_read_lock_trace()
and rcu_read_unlock_trace(), which would allow the RCU tasks trace
grace period to directly read out the target CPU's read-side state.
One challenge is that RCU tasks trace is not targeting a specific
CPU, but rather a task. And that task could switch from one CPU to
another at any time.
This commit therefore uses try_invoke_on_locked_down_task()
and checks for task_curr() in trc_inspect_reader_notrunning().
When this condition holds, the target task is running and cannot move.
If CONFIG_TASKS_TRACE_RCU_READ_MB=y, the new rcu_dynticks_zero_in_eqs()
function can be used to check if the specified integer (in this case,
t->trc_reader_nesting) is zero while the target CPU remains in that same
dyntick-idle sojourn. If so, the target task is in a quiescent state.
If not, trc_read_check_handler() must indicate failure so that the
grace-period kthread can take appropriate action or retry after an
appropriate delay, as the case may be.
With this change, given CONFIG_TASKS_TRACE_RCU_READ_MB=y, if a given
CPU remains idle or a given task continues executing in nohz_full mode,
the RCU tasks trace grace-period kthread will detect this without the
need to send an IPI.
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
It is not as clear as it might be just where in RCU's idle entry/exit
code RCU stops and starts watching the current CPU. This commit therefore
adds comments calling out the transitions.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
We can relax the correctness of counting of number of queued objects in
favor of not hurting performance, by locklessly sampling per-cpu
counters. This should be Ok since under high memory pressure, it should not
matter if we are off by a few objects while counting. The shrinker will
still do the reclaim.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
[ paulmck: Remove unused "flags" variable. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
To reduce grace periods and improve kfree() performance, we have done
batching recently dramatically bringing down the number of grace periods
while giving us the ability to use kfree_bulk() for efficient kfree'ing.
However, this has increased the likelihood of OOM condition under heavy
kfree_rcu() flood on small memory systems. This patch introduces a
shrinker which starts grace periods right away if the system is under
memory pressure due to existence of objects that have still not started
a grace period.
With this patch, I do not observe an OOM anymore on a system with 512MB
RAM and 8 CPUs, with the following rcuperf options:
rcuperf.kfree_loops=20000 rcuperf.kfree_alloc_num=8000
rcuperf.kfree_rcu_test=1 rcuperf.kfree_mult=2
Otherwise it easily OOMs with the above parameters.
NOTE:
1. On systems with no memory pressure, the patch has no effect as intended.
2. In the future, we can use this same mechanism to prevent grace periods
from happening even more, by relying on shrinkers carefully.
Cc: urezki@gmail.com
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit converts the ULONG_CMP_GE() in rcu_gp_fqs_loop() to
time_after() to reflect the fact that it is comparing a timestamp to
the jiffies counter.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Coccinelle reports a warning at use_softirq declaration
WARNING: Assignment of 0/1 to bool variable
The root cause is
use_softirq a variable of bool type is initialised with the integer 1
Replacing 1 with value true solve the issue.
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The rcu_state structure's gp_seq field is only to be modified by the RCU
grace-period kthread, which is single-threaded. This commit therefore
enlists KCSAN's help in enforcing this restriction. This commit applies
KCSAN-specific primitives, so cannot go upstream until KCSAN does.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Even if some CPUs have excessive numbers of callbacks, RCU's grace-period
kthread will still wait normally between successive force-quiescent-state
scans. The first two are the most important, as they are the ones that
enlist aid from the scheduler when overloaded. This commit therefore
omits the wait before the first and the second force-quiescent-state
scan under callback-overload conditions.
This approach was inspired by a discussion with Jeff Roberson.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The rcu_state structure's ncpus field is only to be modified by the
CPU-hotplug CPU-online code path, which is single-threaded. This
commit therefore enlists KCSAN's help in enforcing this restriction.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds stubs for KCSAN's data_race(), ASSERT_EXCLUSIVE_WRITER(),
and ASSERT_EXCLUSIVE_ACCESS() macros to allow code using these macros to
move ahead.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/urgent
Pull RCU fix from Paul E. McKenney.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The rcu_nmi_enter_common() function can be invoked both in interrupt
and NMI handlers. If it is invoked from process context (as opposed
to userspace or idle context) on a nohz_full CPU, it might acquire the
CPU's leaf rcu_node structure's ->lock. Because this lock is held only
with interrupts disabled, this is safe from an interrupt handler, but
doing so from an NMI handler can result in self-deadlock.
This commit therefore adds "irq" to the "if" condition so as to only
acquire the ->lock from irq handlers or process context, never from
an NMI handler.
Fixes: 5b14557b073c ("rcu: Avoid tick_dep_set_cpu() misordering")
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: <stable@vger.kernel.org> # 5.5.x
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- Continued user-access cleanups in the futex code.
- percpu-rwsem rewrite that uses its own waitqueue and atomic_t
instead of an embedded rwsem. This addresses a couple of
weaknesses, but the primary motivation was complications on the -rt
kernel.
- Introduce raw lock nesting detection on lockdep
(CONFIG_PROVE_RAW_LOCK_NESTING=y), document the raw_lock vs. normal
lock differences. This too originates from -rt.
- Reuse lockdep zapped chain_hlocks entries, to conserve RAM
footprint on distro-ish kernels running into the "BUG:
MAX_LOCKDEP_CHAIN_HLOCKS too low!" depletion of the lockdep
chain-entries pool.
- Misc cleanups, smaller fixes and enhancements - see the changelog
for details"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
fs/buffer: Make BH_Uptodate_Lock bit_spin_lock a regular spinlock_t
thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t
Documentation/locking/locktypes: Minor copy editor fixes
Documentation/locking/locktypes: Further clarifications and wordsmithing
m68knommu: Remove mm.h include from uaccess_no.h
x86: get rid of user_atomic_cmpxchg_inatomic()
generic arch_futex_atomic_op_inuser() doesn't need access_ok()
x86: don't reload after cmpxchg in unsafe_atomic_op2() loop
x86: convert arch_futex_atomic_op_inuser() to user_access_begin/user_access_end()
objtool: whitelist __sanitizer_cov_trace_switch()
[parisc, s390, sparc64] no need for access_ok() in futex handling
sh: no need of access_ok() in arch_futex_atomic_op_inuser()
futex: arch_futex_atomic_op_inuser() calling conventions change
completion: Use lockdep_assert_RT_in_threaded_ctx() in complete_all()
lockdep: Add posixtimer context tracing bits
lockdep: Annotate irq_work
lockdep: Add hrtimer context tracing bits
lockdep: Introduce wait-type checks
completion: Use simple wait queues
sched/swait: Prepare usage in completions
...
|
|
'kfree_rcu.2020.02.20a', 'locktorture.2020.02.20a', 'ovld.2020.02.20a', 'rcu-tasks.2020.02.20a', 'srcu.2020.02.20a' and 'torture.2020.02.20a' into HEAD
doc.2020.02.27a: Documentation updates.
fixes.2020.03.21a: Miscellaneous fixes.
kfree_rcu.2020.02.20a: Updates to kfree_rcu().
locktorture.2020.02.20a: Lock torture-test updates.
ovld.2020.02.20a: Updates to callback-overload handling.
rcu-tasks.2020.02.20a: RCU-tasks updates.
srcu.2020.02.20a: SRCU updates.
torture.2020.02.20a: Torture-test updates.
|
|
Currently, rcu_barrier() ignores offline CPUs, However, it is possible
for an offline no-CBs CPU to have callbacks queued, and rcu_barrier()
must wait for those callbacks. This commit therefore makes rcu_barrier()
directly invoke the rcu_barrier_func() with interrupts disabled for such
CPUs. This requires passing the CPU number into this function so that
it can entrain the rcu_barrier() callback onto the correct CPU's callback
list, given that the code must instead execute on the current CPU.
While in the area, this commit fixes a bug where the first CPU's callback
might have been invoked before rcu_segcblist_entrain() returned, which
would also result in an early wakeup.
Fixes: 5d6742b37727 ("rcu/nocb: Use rcu_segcblist for no-CBs CPUs")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[ paulmck: Apply optimization feedback from Boqun Feng. ]
Cc: <stable@vger.kernel.org> # 5.5.x
|
