| Age | Commit message (Collapse) | Author |
|---|
|
Change how we do accounting in BPF_LOG_FIXED mode and adopt log->end_pos
as *logical* log position. This means that we can go beyond physical log
buffer size now and be able to tell what log buffer size should be to
fit entire log contents without -ENOSPC.
To do this for BPF_LOG_FIXED mode, we need to remove a short-circuiting
logic of not vsnprintf()'ing further log content once we filled up
user-provided buffer, which is done by bpf_verifier_log_needed() checks.
We modify these checks to always keep going if log->level is non-zero
(i.e., log is requested), even if log->ubuf was NULL'ed out due to
copying data to user-space, or if entire log buffer is physically full.
We adopt bpf_verifier_vlog() routine to work correctly with
log->ubuf == NULL condition, performing log formatting into temporary
kernel buffer, doing all the necessary accounting, but just avoiding
copying data out if buffer is full or NULL'ed out.
With these changes, it's now possible to do this sort of determination of
log contents size in both BPF_LOG_FIXED and default rolling log mode.
We need to keep in mind bpf_vlog_reset(), though, which shrinks log
contents after successful verification of a particular code path. This
log reset means that log->end_pos isn't always increasing, so to return
back to users what should be the log buffer size to fit all log content
without causing -ENOSPC even in the presence of log resetting, we need
to keep maximum over "lifetime" of logging. We do this accounting in
bpf_vlog_update_len_max() helper.
A related and subtle aspect is that with this logical log->end_pos even in
BPF_LOG_FIXED mode we could temporary "overflow" buffer, but then reset
it back with bpf_vlog_reset() to a position inside user-supplied
log_buf. In such situation we still want to properly maintain
terminating zero. We will eventually return -ENOSPC even if final log
buffer is small (we detect this through log->len_max check). This
behavior is simpler to reason about and is consistent with current
behavior of verifier log. Handling of this required a small addition to
bpf_vlog_reset() logic to avoid doing put_user() beyond physical log
buffer dimensions.
Another issue to keep in mind is that we limit log buffer size to 32-bit
value and keep such log length as u32, but theoretically verifier could
produce huge log stretching beyond 4GB. Instead of keeping (and later
returning) 64-bit log length, we cap it at UINT_MAX. Current UAPI makes
it impossible to specify log buffer size bigger than 4GB anyways, so we
don't really loose anything here and keep everything consistently 32-bit
in UAPI. This property will be utilized in next patch.
Doing the same determination of maximum log buffer for rolling mode is
trivial, as log->end_pos and log->start_pos are already logical
positions, so there is nothing new there.
These changes do incidentally fix one small issue with previous logging
logic. Previously, if use provided log buffer of size N, and actual log
output was exactly N-1 bytes + terminating \0, kernel logic coun't
distinguish this condition from log truncation scenario which would end
up with truncated log contents of N-1 bytes + terminating \0 as well.
But now with log->end_pos being logical position that could go beyond
actual log buffer size, we can distinguish these two conditions, which
we do in this patch. This plays nicely with returning log_size_actual
(implemented in UAPI in the next patch), as we can now guarantee that if
user takes such log_size_actual and provides log buffer of that exact
size, they will not get -ENOSPC in return.
All in all, all these changes do conceptually unify fixed and rolling
log modes much better, and allow a nice feature requested by users:
knowing what should be the size of the buffer to avoid -ENOSPC.
We'll plumb this through the UAPI and the code in the next patch.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-12-andrii@kernel.org
|
|
Move log->level == 0 check into bpf_vlog_truncated() instead of doing it
explicitly. Also remove unnecessary goto in kernel/bpf/verifier.c.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-11-andrii@kernel.org
|
|
If verifier log is in BPF_LOG_KERNEL mode, no log->ubuf is expected and
it stays NULL throughout entire verification process. Don't erroneously
return -EFAULT in such case.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-10-andrii@kernel.org
|
|
btf_parse() is missing -EFAULT error return if log->ubuf was NULL-ed out
due to error while copying data into user-provided buffer. Add it, but
handle a special case of BPF_LOG_KERNEL in which log->ubuf is always NULL.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-9-andrii@kernel.org
|
|
Verifier log position reset is meaningless in BPF_LOG_KERNEL mode, so
just exit early in bpf_vlog_reset() if log->level is BPF_LOG_KERNEL.
This avoid meaningless put_user() into NULL log->ubuf.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-8-andrii@kernel.org
|
|
Currently, if user-supplied log buffer to collect BPF verifier log turns
out to be too small to contain full log, bpf() syscall returns -ENOSPC,
fails BPF program verification/load, and preserves first N-1 bytes of
the verifier log (where N is the size of user-supplied buffer).
This is problematic in a bunch of common scenarios, especially when
working with real-world BPF programs that tend to be pretty complex as
far as verification goes and require big log buffers. Typically, it's
when debugging tricky cases at log level 2 (verbose). Also, when BPF program
is successfully validated, log level 2 is the only way to actually see
verifier state progression and all the important details.
Even with log level 1, it's possible to get -ENOSPC even if the final
verifier log fits in log buffer, if there is a code path that's deep
enough to fill up entire log, even if normally it would be reset later
on (there is a logic to chop off successfully validated portions of BPF
verifier log).
In short, it's not always possible to pre-size log buffer. Also, what's
worse, in practice, the end of the log most often is way more important
than the beginning, but verifier stops emitting log as soon as initial
log buffer is filled up.
This patch switches BPF verifier log behavior to effectively behave as
rotating log. That is, if user-supplied log buffer turns out to be too
short, verifier will keep overwriting previously written log,
effectively treating user's log buffer as a ring buffer. -ENOSPC is
still going to be returned at the end, to notify user that log contents
was truncated, but the important last N bytes of the log would be
returned, which might be all that user really needs. This consistent
-ENOSPC behavior, regardless of rotating or fixed log behavior, allows
to prevent backwards compatibility breakage. The only user-visible
change is which portion of verifier log user ends up seeing *if buffer
is too small*. Given contents of verifier log itself is not an ABI,
there is no breakage due to this behavior change. Specialized tools that
rely on specific contents of verifier log in -ENOSPC scenario are
expected to be easily adapted to accommodate old and new behaviors.
Importantly, though, to preserve good user experience and not require
every user-space application to adopt to this new behavior, before
exiting to user-space verifier will rotate log (in place) to make it
start at the very beginning of user buffer as a continuous
zero-terminated string. The contents will be a chopped off N-1 last
bytes of full verifier log, of course.
Given beginning of log is sometimes important as well, we add
BPF_LOG_FIXED (which equals 8) flag to force old behavior, which allows
tools like veristat to request first part of verifier log, if necessary.
BPF_LOG_FIXED flag is also a simple and straightforward way to check if
BPF verifier supports rotating behavior.
On the implementation side, conceptually, it's all simple. We maintain
64-bit logical start and end positions. If we need to truncate the log,
start position will be adjusted accordingly to lag end position by
N bytes. We then use those logical positions to calculate their matching
actual positions in user buffer and handle wrap around the end of the
buffer properly. Finally, right before returning from bpf_check(), we
rotate user log buffer contents in-place as necessary, to make log
contents contiguous. See comments in relevant functions for details.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-4-andrii@kernel.org
|
|
It's not clear why we have 128 as minimum size, but it makes testing
harder and seems unnecessary, as we carefully handle truncation
scenarios and use proper snprintf variants. So remove this limitation
and just enforce positive length for log buffer.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-3-andrii@kernel.org
|
|
kernel/bpf/verifier.c file is large and growing larger all the time. So
it's good to start splitting off more or less self-contained parts into
separate files to keep source code size (somewhat) somewhat under
control.
This patch is a one step in this direction, moving some of BPF verifier log
routines into a separate kernel/bpf/log.c. Right now it's most low-level
and isolated routines to append data to log, reset log to previous
position, etc. Eventually we could probably move verifier state
printing logic here as well, but this patch doesn't attempt to do that
yet.
Subsequent patches will add more logic to verifier log management, so
having basics in a separate file will make sure verifier.c doesn't grow
more with new changes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-2-andrii@kernel.org
|
|
BPF helpers that take an ARG_PTR_TO_UNINIT_MEM must ensure that all of
the memory is set, including beyond the end of the string.
Signed-off-by: Barret Rhoden <brho@google.com>
Link: https://lore.kernel.org/r/20230407001808.1622968-1-brho@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, the verifier does not handle '<const> <cond_op> <non_const>' well.
For example,
...
10: (79) r1 = *(u64 *)(r10 -16) ; R1_w=scalar() R10=fp0
11: (b7) r2 = 0 ; R2_w=0
12: (2d) if r2 > r1 goto pc+2
13: (b7) r0 = 0
14: (95) exit
15: (65) if r1 s> 0x1 goto pc+3
16: (0f) r0 += r1
...
At insn 12, verifier decides both true and false branch are possible, but
actually only false branch is possible.
Currently, the verifier already supports patterns '<non_const> <cond_op> <const>.
Add support for patterns '<const> <cond_op> <non_const>' in a similar way.
Also fix selftest 'verifier_bounds_mix_sign_unsign/bounds checks mixing signed and unsigned, variant 10'
due to this change.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230406164505.1046801-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, for BPF_JEQ/BPF_JNE insn, verifier determines
whether the branch is taken or not only if both operands
are constants. Therefore, for the following code snippet,
0: (85) call bpf_ktime_get_ns#5 ; R0_w=scalar()
1: (a5) if r0 < 0x3 goto pc+2 ; R0_w=scalar(umin=3)
2: (b7) r2 = 2 ; R2_w=2
3: (1d) if r0 == r2 goto pc+2 6
At insn 3, since r0 is not a constant, verifier assumes both branch
can be taken which may lead inproper verification failure.
Add comparing umin/umax value and the constant. If the umin value
is greater than the constant, or umax value is smaller than the constant,
for JEQ the branch must be not-taken, and for JNE the branch must be taken.
The jmp32 mode JEQ/JNE branch taken checking is also handled similarly.
The following lists the veristat result w.r.t. changed number
of processes insns during verification:
File Program Insns (A) Insns (B) Insns (DIFF)
----------------------------------------------------- ---------------------------------------------------- --------- --------- ---------------
test_cls_redirect.bpf.linked3.o cls_redirect 64980 73472 +8492 (+13.07%)
test_seg6_loop.bpf.linked3.o __add_egr_x 12425 12423 -2 (-0.02%)
test_tcp_hdr_options.bpf.linked3.o estab 2634 2558 -76 (-2.89%)
test_parse_tcp_hdr_opt.bpf.linked3.o xdp_ingress_v6 1421 1420 -1 (-0.07%)
test_parse_tcp_hdr_opt_dynptr.bpf.linked3.o xdp_ingress_v6 1238 1237 -1 (-0.08%)
test_tc_dtime.bpf.linked3.o egress_fwdns_prio100 414 411 -3 (-0.72%)
Mostly a small improvement but test_cls_redirect.bpf.linked3.o has a 13% regression.
I checked with verifier log and found it this is due to pruning.
For some JEQ/JNE branches impacted by this patch,
one branch is explored and the other has state equivalence and
pruned.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230406164455.1045294-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The commit 6fcd486b3a0a ("bpf: Refactor RCU enforcement in the verifier.")
broke several tracing bpf programs. Even in clang compiled kernels there are
many fields that are not marked with __rcu that are safe to read and pass into
helpers, but the verifier doesn't know that they're safe. Aggressively marking
them as PTR_UNTRUSTED was premature.
Fixes: 6fcd486b3a0a ("bpf: Refactor RCU enforcement in the verifier.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230404045029.82870-8-alexei.starovoitov@gmail.com
|
|
Allow bpf program access cgrp->kn, mm->exe_file, skb->sk, req->sk.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230404045029.82870-7-alexei.starovoitov@gmail.com
|
|
check_reg_type() unconditionally disallows PTR_TO_BTF_ID | PTR_MAYBE_NULL.
It's problematic for helpers that allow ARG_PTR_TO_BTF_ID_OR_NULL like
bpf_sk_storage_get(). Allow passing PTR_TO_BTF_ID | PTR_MAYBE_NULL into such
helpers. That technically includes bpf_kptr_xchg() helper, but in practice:
bpf_kptr_xchg(..., bpf_cpumask_create());
is still disallowed because bpf_cpumask_create() returns ref counted pointer
with ref_obj_id > 0.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230404045029.82870-6-alexei.starovoitov@gmail.com
|
|
bpf_[sk|inode|task|cgrp]_storage_[get|delete]() and bpf_get_socket_cookie() helpers
perform run-time check that sk|inode|task|cgrp pointer != NULL.
Teach verifier about this fact and allow bpf programs to pass
PTR_TO_BTF_ID | PTR_MAYBE_NULL into such helpers.
It will be used in the subsequent patch that will do
bpf_sk_storage_get(.., skb->sk, ...);
Even when 'skb' pointer is trusted the 'sk' pointer may be NULL.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230404045029.82870-5-alexei.starovoitov@gmail.com
|
|
btf_nested_type_is_trusted() tries to find a struct member at corresponding offset.
It works for flat structures and falls apart in more complex structs with nested structs.
The offset->member search is already performed by btf_struct_walk() including nested structs.
Reuse this work and pass {field name, field btf id} into btf_nested_type_is_trusted()
instead of offset to make BTF_TYPE_SAFE*() logic more robust.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230404045029.82870-4-alexei.starovoitov@gmail.com
|
|
Remove unused arguments from btf_struct_access() callback.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230404045029.82870-3-alexei.starovoitov@gmail.com
|
|
Remove duplicated if (atype == BPF_READ) btf_struct_access() from
btf_struct_access() callback and invoke it only for writes. This is
possible to do because currently btf_struct_access() custom callback
always delegates to generic btf_struct_access() helper for BPF_READ
accesses.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230404045029.82870-2-alexei.starovoitov@gmail.com
|
|
bpf_obj_drop_impl has a void return type. In check_kfunc_call, the "else
if" which sets insn_aux->kptr_struct_meta for bpf_obj_drop_impl is
surrounded by a larger if statement which checks btf_type_is_ptr. As a
result:
* The bpf_obj_drop_impl-specific code will never execute
* The btf_struct_meta input to bpf_obj_drop is always NULL
* __bpf_obj_drop_impl will always see a NULL btf_record when called
from BPF program, and won't call bpf_obj_free_fields
* program-allocated kptrs which have fields that should be cleaned up
by bpf_obj_free_fields may instead leak resources
This patch adds a btf_type_is_void branch to the larger if and moves
special handling for bpf_obj_drop_impl there, fixing the issue.
Fixes: ac9f06050a35 ("bpf: Introduce bpf_obj_drop")
Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230403200027.2271029-1-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
If the value size in a bloom filter is a multiple of 4, then the jhash2()
function is used to compute hashes. The length parameter of this function
equals to the number of 32-bit words in input. Compute it in the hot path
instead of pre-computing it, as this is translated to one extra shift to
divide the length by four vs. one extra memory load of a pre-computed length.
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Link: https://lore.kernel.org/r/20230402114340.3441-1-aspsk@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The BPF hashmap uses the jhash() hash function. There is an optimized version
of this hash function which may be used if hash size is a multiple of 4. Apply
this optimization to the hashmap in a similar way as it is done in the bloom
filter map.
On practice the optimization is only noticeable for smaller key sizes, which,
however, is sufficient for many applications. An example is listed in the
following table of measurements (a hashmap of 65536 elements was used):
--------------------------------------------------------------------
| key_size | fullness | lookups /sec | lookups (opt) /sec | gain |
--------------------------------------------------------------------
| 4 | 25% | 42.990M | 46.000M | 7.0% |
| 4 | 50% | 37.910M | 39.094M | 3.1% |
| 4 | 75% | 34.486M | 36.124M | 4.7% |
| 4 | 100% | 31.760M | 32.719M | 3.0% |
--------------------------------------------------------------------
| 8 | 25% | 43.855M | 49.626M | 13.2% |
| 8 | 50% | 38.328M | 42.152M | 10.0% |
| 8 | 75% | 34.483M | 38.088M | 10.5% |
| 8 | 100% | 31.306M | 34.686M | 10.8% |
--------------------------------------------------------------------
| 12 | 25% | 38.398M | 43.770M | 14.0% |
| 12 | 50% | 33.336M | 37.712M | 13.1% |
| 12 | 75% | 29.917M | 34.440M | 15.1% |
| 12 | 100% | 27.322M | 30.480M | 11.6% |
--------------------------------------------------------------------
| 16 | 25% | 41.491M | 41.921M | 1.0% |
| 16 | 50% | 36.206M | 36.474M | 0.7% |
| 16 | 75% | 32.529M | 33.027M | 1.5% |
| 16 | 100% | 29.581M | 30.325M | 2.5% |
--------------------------------------------------------------------
| 20 | 25% | 34.240M | 36.787M | 7.4% |
| 20 | 50% | 30.328M | 32.663M | 7.7% |
| 20 | 75% | 27.536M | 29.354M | 6.6% |
| 20 | 100% | 24.847M | 26.505M | 6.7% |
--------------------------------------------------------------------
| 24 | 25% | 36.329M | 40.608M | 11.8% |
| 24 | 50% | 31.444M | 35.059M | 11.5% |
| 24 | 75% | 28.426M | 31.452M | 10.6% |
| 24 | 100% | 26.278M | 28.741M | 9.4% |
--------------------------------------------------------------------
| 28 | 25% | 31.540M | 31.944M | 1.3% |
| 28 | 50% | 27.739M | 28.063M | 1.2% |
| 28 | 75% | 24.993M | 25.814M | 3.3% |
| 28 | 100% | 23.513M | 23.500M | -0.1% |
--------------------------------------------------------------------
| 32 | 25% | 32.116M | 33.953M | 5.7% |
| 32 | 50% | 28.879M | 29.859M | 3.4% |
| 32 | 75% | 26.227M | 26.948M | 2.7% |
| 32 | 100% | 23.829M | 24.613M | 3.3% |
--------------------------------------------------------------------
| 64 | 25% | 22.535M | 22.554M | 0.1% |
| 64 | 50% | 20.471M | 20.675M | 1.0% |
| 64 | 75% | 19.077M | 19.146M | 0.4% |
| 64 | 100% | 17.710M | 18.131M | 2.4% |
--------------------------------------------------------------------
The following script was used to gather the results (SMT & frequency off):
cd tools/testing/selftests/bpf
for key_size in 4 8 12 16 20 24 28 32 64; do
for nr_entries in `seq 16384 16384 65536`; do
fullness=$(printf '%3s' $((nr_entries*100/65536)))
echo -n "key_size=$key_size: $fullness% full: "
sudo ./bench -d2 -a bpf-hashmap-lookup --key_size=$key_size --nr_entries=$nr_entries --max_entries=65536 --nr_loops=2000000 --map_flags=0x40 | grep cpu
done
echo
done
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Link: https://lore.kernel.org/r/20230401200602.3275-1-aspsk@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In commit 22df776a9a86 ("tasks: Extract rcu_users out of union"), the
'refcount_t rcu_users' field was extracted out of a union with the
'struct rcu_head rcu' field. This allows us to safely perform a
refcount_inc_not_zero() on task->rcu_users when acquiring a reference on
a task struct. A prior patch leveraged this by making struct task_struct
an RCU-protected object in the verifier, and by bpf_task_acquire() to
use the task->rcu_users field for synchronization.
Now that we can use RCU to protect tasks, we no longer need
bpf_task_kptr_get(), or bpf_task_acquire_not_zero(). bpf_task_kptr_get()
is truly completely unnecessary, as we can just use RCU to get the
object. bpf_task_acquire_not_zero() is now equivalent to
bpf_task_acquire().
In addition to these changes, this patch also updates the associated
selftests to no longer use these kfuncs.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230331195733.699708-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
struct task_struct objects are a bit interesting in terms of how their
lifetime is protected by refcounts. task structs have two refcount
fields:
1. refcount_t usage: Protects the memory backing the task struct. When
this refcount drops to 0, the task is immediately freed, without
waiting for an RCU grace period to elapse. This is the field that
most callers in the kernel currently use to ensure that a task
remains valid while it's being referenced, and is what's currently
tracked with bpf_task_acquire() and bpf_task_release().
2. refcount_t rcu_users: A refcount field which, when it drops to 0,
schedules an RCU callback that drops a reference held on the 'usage'
field above (which is acquired when the task is first created). This
field therefore provides a form of RCU protection on the task by
ensuring that at least one 'usage' refcount will be held until an RCU
grace period has elapsed. The qualifier "a form of" is important
here, as a task can remain valid after task->rcu_users has dropped to
0 and the subsequent RCU gp has elapsed.
In terms of BPF, we want to use task->rcu_users to protect tasks that
function as referenced kptrs, and to allow tasks stored as referenced
kptrs in maps to be accessed with RCU protection.
Let's first determine whether we can safely use task->rcu_users to
protect tasks stored in maps. All of the bpf_task* kfuncs can only be
called from tracepoint, struct_ops, or BPF_PROG_TYPE_SCHED_CLS, program
types. For tracepoint and struct_ops programs, the struct task_struct
passed to a program handler will always be trusted, so it will always be
safe to call bpf_task_acquire() with any task passed to a program.
Note, however, that we must update bpf_task_acquire() to be KF_RET_NULL,
as it is possible that the task has exited by the time the program is
invoked, even if the pointer is still currently valid because the main
kernel holds a task->usage refcount. For BPF_PROG_TYPE_SCHED_CLS, tasks
should never be passed as an argument to the any program handlers, so it
should not be relevant.
The second question is whether it's safe to use RCU to access a task
that was acquired with bpf_task_acquire(), and stored in a map. Because
bpf_task_acquire() now uses task->rcu_users, it follows that if the task
is present in the map, that it must have had at least one
task->rcu_users refcount by the time the current RCU cs was started.
Therefore, it's safe to access that task until the end of the current
RCU cs.
With all that said, this patch makes struct task_struct is an
RCU-protected object. In doing so, we also change bpf_task_acquire() to
be KF_ACQUIRE | KF_RCU | KF_RET_NULL, and adjust any selftests as
necessary. A subsequent patch will remove bpf_task_kptr_get(), and
bpf_task_acquire_not_zero() respectively.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230331195733.699708-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When validating a helper function argument, we use check_reg_type() to
ensure that the register containing the argument is of the correct type.
When the register's base type is PTR_TO_BTF_ID, there is some
supplemental logic where we do extra checks for various combinations of
PTR_TO_BTF_ID type modifiers. For example, for PTR_TO_BTF_ID,
PTR_TO_BTF_ID | PTR_TRUSTED, and PTR_TO_BTF_ID | MEM_RCU, we call
map_kptr_match_type() for bpf_kptr_xchg() calls, and
btf_struct_ids_match() for other helper calls.
When an unhandled PTR_TO_BTF_ID type modifier combination is passed to
check_reg_type(), the verifier fails with an internal verifier error
message. This can currently be triggered by passing a PTR_MAYBE_NULL
pointer to helper functions (currently just bpf_kptr_xchg()) with an
ARG_PTR_TO_BTF_ID_OR_NULL arg type. For example, by callin
bpf_kptr_xchg(&v->kptr, bpf_cpumask_create()).
Whether or not passing a PTR_MAYBE_NULL arg to an
ARG_PTR_TO_BTF_ID_OR_NULL argument is valid is an interesting question.
In a vacuum, it seems fine. A helper function with an
ARG_PTR_TO_BTF_ID_OR_NULL arg would seem to be implying that it can
handle either a NULL or non-NULL arg, and has logic in place to detect
and gracefully handle each. This is the case for bpf_kptr_xchg(), which
of course simply does an xchg(). On the other hand, bpf_kptr_xchg() also
specifies OBJ_RELEASE, and refcounting semantics for a PTR_MAYBE_NULL
pointer is different than handling it for a NULL _OR_ non-NULL pointer.
For example, with a non-NULL arg, we should always fail if there was not
a nonzero refcount for the value in the register being passed to the
helper. For PTR_MAYBE_NULL on the other hand, it's unclear. If the
pointer is NULL it would be fine, but if it's not NULL, it would be
incorrect to load the program.
The current solution to this is to just fail if PTR_MAYBE_NULL is
passed, and to instead require programs to have a NULL check to
explicitly handle the NULL and non-NULL cases. This seems reasonable.
Not only would it possibly be quite complicated to correctly handle
PTR_MAYBE_NULL refcounting in the verifier, but it's also an arguably
odd programming pattern in general to not explicitly handle the NULL
case anyways. For example, it seems odd to not care about whether a
pointer you're passing to bpf_kptr_xchg() was successfully allocated in
a program such as the following:
private(MASK) static struct bpf_cpumask __kptr * global_mask;
SEC("tp_btf/task_newtask")
int BPF_PROG(example, struct task_struct *task, u64 clone_flags)
{
struct bpf_cpumask *prev;
/* bpf_cpumask_create() returns PTR_MAYBE_NULL */
prev = bpf_kptr_xchg(&global_mask, bpf_cpumask_create());
if (prev)
bpf_cpumask_release(prev);
return 0;
}
This patch therefore updates the verifier to explicitly check for
PTR_MAYBE_NULL in check_reg_type(), and fail gracefully if it's
observed. This isn't really "fixing" anything unsafe or incorrect. We're
just updating the verifier to fail gracefully, and explicitly handle
this pattern rather than unintentionally falling back to an internal
verifier error path. A subsequent patch will update selftests.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230330145203.80506-1-void@manifault.com
|
|
This patch uses bpf_mem_cache_alloc/free for allocating and freeing
bpf_local_storage for task and cgroup storage.
The changes are similar to the previous patch. A few things that
worth to mention for bpf_local_storage:
The local_storage is freed when the last selem is deleted.
Before deleting a selem from local_storage, it needs to retrieve the
local_storage->smap because the bpf_selem_unlink_storage_nolock()
may have set it to NULL. Note that local_storage->smap may have
already been NULL when the selem created this local_storage has
been removed. In this case, call_rcu will be used to free the
local_storage.
Also, the bpf_ma (true or false) value is needed before calling
bpf_local_storage_free(). The bpf_ma can either be obtained from
the local_storage->smap (if available) or any of its selem's smap.
A new helper check_storage_bpf_ma() is added to obtain
bpf_ma for a deleting bpf_local_storage.
When bpf_local_storage_alloc getting a reused memory, all
fields are either in the correct values or will be initialized.
'cache[]' must already be all NULLs. 'list' must be empty.
Others will be initialized.
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230322215246.1675516-4-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch uses bpf_mem_alloc for the task and cgroup local storage that
the bpf prog can easily get a hold of the storage owner's PTR_TO_BTF_ID.
eg. bpf_get_current_task_btf() can be used in some of the kmalloc code
path which will cause deadlock/recursion. bpf_mem_cache_alloc is
deadlock free and will solve a legit use case in [1].
For sk storage, its batch creation benchmark shows a few percent
regression when the sk create/destroy batch size is larger than 32.
The sk creation/destruction happens much more often and
depends on external traffic. Considering it is hypothetical
to be able to cause deadlock with sk storage, it can cross
the bridge to use bpf_mem_alloc till a legit (ie. useful)
use case comes up.
For inode storage, bpf_local_storage_destroy() is called before
waiting for a rcu gp and its memory cannot be reused immediately.
inode stays with kmalloc/kfree after the rcu [or tasks_trace] gp.
A 'bool bpf_ma' argument is added to bpf_local_storage_map_alloc().
Only task and cgroup storage have 'bpf_ma == true' which
means to use bpf_mem_cache_alloc/free(). This patch only changes
selem to use bpf_mem_alloc for task and cgroup. The next patch
will change the local_storage to use bpf_mem_alloc also for
task and cgroup.
Here is some more details on the changes:
* memory allocation:
After bpf_mem_cache_alloc(), the SDATA(selem)->data is zero-ed because
bpf_mem_cache_alloc() could return a reused selem. It is to keep
the existing bpf_map_kzalloc() behavior. Only SDATA(selem)->data
is zero-ed. SDATA(selem)->data is the visible part to the bpf prog.
No need to use zero_map_value() to do the zeroing because
bpf_selem_free(..., reuse_now = true) ensures no bpf prog is using
the selem before returning the selem through bpf_mem_cache_free().
For the internal fields of selem, they will be initialized when
linking to the new smap and the new local_storage.
When 'bpf_ma == false', nothing changes in this patch. It will
stay with the bpf_map_kzalloc().
* memory free:
The bpf_selem_free() and bpf_selem_free_rcu() are modified to handle
the bpf_ma == true case.
For the common selem free path where its owner is also being destroyed,
the mem is freed in bpf_local_storage_destroy(), the owner (task
and cgroup) has gone through a rcu gp. The memory can be reused
immediately, so bpf_local_storage_destroy() will call
bpf_selem_free(..., reuse_now = true) which will do
bpf_mem_cache_free() for immediate reuse consideration.
An exception is the delete elem code path. The delete elem code path
is called from the helper bpf_*_storage_delete() and the syscall
bpf_map_delete_elem(). This path is an unusual case for local
storage because the common use case is to have the local storage
staying with its owner life time so that the bpf prog and the user
space does not have to monitor the owner's destruction. For the delete
elem path, the selem cannot be reused immediately because there could
be bpf prog using it. It will call bpf_selem_free(..., reuse_now = false)
and it will wait for a rcu tasks trace gp before freeing the elem. The
rcu callback is changed to do bpf_mem_cache_raw_free() instead of kfree().
When 'bpf_ma == false', it should be the same as before.
__bpf_selem_free() is added to do the kfree_rcu and call_tasks_trace_rcu().
A few words on the 'reuse_now == true'. When 'reuse_now == true',
it is still racing with bpf_local_storage_map_free which is under rcu
protection, so it still needs to wait for a rcu gp instead of kfree().
Otherwise, the selem may be reused by slab for a totally different struct
while the bpf_local_storage_map_free() is still using it (as a
rcu reader). For the inode case, there may be other rcu readers also.
In short, when bpf_ma == false and reuse_now == true => vanilla rcu.
[1]: https://lore.kernel.org/bpf/20221118190109.1512674-1-namhyung@kernel.org/
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230322215246.1675516-3-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds a few bpf mem allocator functions which will
be used in the bpf_local_storage in a later patch.
bpf_mem_cache_alloc_flags(..., gfp_t flags) is added. When the
flags == GFP_KERNEL, it will fallback to __alloc(..., GFP_KERNEL).
bpf_local_storage knows its running context is sleepable (GFP_KERNEL)
and provides a better guarantee on memory allocation.
bpf_local_storage has some uncommon cases that its selem
cannot be reused immediately. It handles its own
rcu_head and goes through a rcu_trace gp and then free it.
bpf_mem_cache_raw_free() is added for direct free purpose
without leaking the LLIST_NODE_SZ internal knowledge.
During free time, the 'struct bpf_mem_alloc *ma' is no longer
available. However, the caller should know if it is
percpu memory or not and it can call different raw_free functions.
bpf_local_storage does not support percpu value, so only
the non-percpu 'bpf_mem_cache_raw_free()' is added in
this patch.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230322215246.1675516-2-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
KF_RELEASE kfuncs are not currently treated as having KF_TRUSTED_ARGS,
even though they have a superset of the requirements of KF_TRUSTED_ARGS.
Like KF_TRUSTED_ARGS, KF_RELEASE kfuncs require a 0-offset argument, and
don't allow NULL-able arguments. Unlike KF_TRUSTED_ARGS which require
_either_ an argument with ref_obj_id > 0, _or_ (ref->type &
BPF_REG_TRUSTED_MODIFIERS) (and no unsafe modifiers allowed), KF_RELEASE
only allows for ref_obj_id > 0. Because KF_RELEASE today doesn't
automatically imply KF_TRUSTED_ARGS, some of these requirements are
enforced in different ways that can make the behavior of the verifier
feel unpredictable. For example, a KF_RELEASE kfunc with a NULL-able
argument will currently fail in the verifier with a message like, "arg#0
is ptr_or_null_ expected ptr_ or socket" rather than "Possibly NULL
pointer passed to trusted arg0". Our intention is the same, but the
semantics are different due to implemenetation details that kfunc authors
and BPF program writers should not need to care about.
Let's make the behavior of the verifier more consistent and intuitive by
having KF_RELEASE kfuncs imply the presence of KF_TRUSTED_ARGS. Our
eventual goal is to have all kfuncs assume KF_TRUSTED_ARGS by default
anyways, so this takes us a step in that direction.
Note that it does not make sense to assume KF_TRUSTED_ARGS for all
KF_ACQUIRE kfuncs. KF_ACQUIRE kfuncs can have looser semantics than
KF_RELEASE, with e.g. KF_RCU | KF_RET_NULL. We may want to have
KF_ACQUIRE imply KF_TRUSTED_ARGS _unless_ KF_RCU is specified, but that
can be left to another patch set, and there are no such subtleties to
address for KF_RELEASE.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230325213144.486885-4-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Now that we're not invoking kfunc destructors when the kptr in a map was
NULL, we no longer require NULL checks in many of our KF_RELEASE kfuncs.
This patch removes those NULL checks.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230325213144.486885-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When a map value is being freed, we loop over all of the fields of the
corresponding BPF object and issue the appropriate cleanup calls
corresponding to the field's type. If the field is a referenced kptr, we
atomically xchg the value out of the map, and invoke the kptr's
destructor on whatever was there before (or bpf_obj_drop() it if it was
a local kptr).
Currently, we always invoke the destructor (either bpf_obj_drop() or the
kptr's registered destructor) on any KPTR_REF-type field in a map, even
if there wasn't a value in the map. This means that any function serving
as the kptr's KF_RELEASE destructor must always treat the argument as
possibly NULL, as the following can and regularly does happen:
void *xchgd_field;
/* No value was in the map, so xchgd_field is NULL */
xchgd_field = (void *)xchg(unsigned long *field_ptr, 0);
field->kptr.dtor(xchgd_field);
These are odd semantics to impose on KF_RELEASE kfuncs -- BPF programs
are prohibited by the verifier from passing NULL pointers to KF_RELEASE
kfuncs, so it doesn't make sense to require this of BPF programs, but
not the main kernel destructor path. It's also unnecessary to invoke any
cleanup logic for local kptrs. If there is no object there, there's
nothing to drop.
So as to allow KF_RELEASE kfuncs to fully assume that an argument is
non-NULL, this patch updates a KPTR_REF's destructor to only be invoked
when a non-NULL value is xchg'd out of the kptr map field.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230325213144.486885-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch fixes a mistake in checking NULL instead of
checking IS_ERR for the bpf_map_get() return value.
It also fixes the return value in link_update_map() from -EINVAL
to PTR_ERR(*_map).
Reported-by: syzbot+71ccc0fe37abb458406b@syzkaller.appspotmail.com
Fixes: 68b04864ca42 ("bpf: Create links for BPF struct_ops maps.")
Fixes: aef56f2e918b ("bpf: Update the struct_ops of a bpf_link.")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Kui-Feng Lee <kuifeng@meta.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230324184241.1387437-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Conflicts:
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
6e9d51b1a5cb ("net/mlx5e: Initialize link speed to zero")
1bffcea42926 ("net/mlx5e: Add devlink hairpin queues parameters")
https://lore.kernel.org/all/20230324120623.4ebbc66f@canb.auug.org.au/
https://lore.kernel.org/all/20230321211135.47711-1-saeed@kernel.org/
Adjacent changes:
drivers/net/phy/phy.c
323fe43cf9ae ("net: phy: Improved PHY error reporting in state machine")
4203d84032e2 ("net: phy: Ensure state transitions are processed from phy_stop()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
By improving the BPF_LINK_UPDATE command of bpf(), it should allow you
to conveniently switch between different struct_ops on a single
bpf_link. This would enable smoother transitions from one struct_ops
to another.
The struct_ops maps passing along with BPF_LINK_UPDATE should have the
BPF_F_LINK flag.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230323032405.3735486-6-kuifeng@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Make bpf_link support struct_ops. Previously, struct_ops were always
used alone without any associated links. Upon updating its value, a
struct_ops would be activated automatically. Yet other BPF program
types required to make a bpf_link with their instances before they
could become active. Now, however, you can create an inactive
struct_ops, and create a link to activate it later.
With bpf_links, struct_ops has a behavior similar to other BPF program
types. You can pin/unpin them from their links and the struct_ops will
be deactivated when its link is removed while previously need someone
to delete the value for it to be deactivated.
bpf_links are responsible for registering their associated
struct_ops. You can only use a struct_ops that has the BPF_F_LINK flag
set to create a bpf_link, while a structs without this flag behaves in
the same manner as before and is registered upon updating its value.
The BPF_LINK_TYPE_STRUCT_OPS serves a dual purpose. Not only is it
used to craft the links for BPF struct_ops programs, but also to
create links for BPF struct_ops them-self. Since the links of BPF
struct_ops programs are only used to create trampolines internally,
they are never seen in other contexts. Thus, they can be reused for
struct_ops themself.
To maintain a reference to the map supporting this link, we add
bpf_struct_ops_link as an additional type. The pointer of the map is
RCU and won't be necessary until later in the patchset.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Link: https://lore.kernel.org/r/20230323032405.3735486-4-kuifeng@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
We have replaced kvalue-refcnt with synchronize_rcu() to wait for an
RCU grace period.
Maintenance of kvalue->refcnt was a complicated task, as we had to
simultaneously keep track of two reference counts: one for the
reference count of bpf_map. When the kvalue->refcnt reaches zero, we
also have to reduce the reference count on bpf_map - yet these steps
are not performed in an atomic manner and require us to be vigilant
when managing them. By eliminating kvalue->refcnt, we can make our
maintenance more straightforward as the refcount of bpf_map is now
solely managed!
To prevent the trampoline image of a struct_ops from being released
while it is still in use, we wait for an RCU grace period. The
setsockopt(TCP_CONGESTION, "...") command allows you to change your
socket's congestion control algorithm and can result in releasing the
old struct_ops implementation. It is fine. However, this function is
exposed through bpf_setsockopt(), it may be accessed by BPF programs
as well. To ensure that the trampoline image belonging to struct_op
can be safely called while its method is in use, the trampoline
safeguarde the BPF program with rcu_read_lock(). Doing so prevents any
destruction of the associated images before returning from a
trampoline and requires us to wait for an RCU grace period.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Link: https://lore.kernel.org/r/20230323032405.3735486-2-kuifeng@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
For iter_new() functions iterator state's slot might not be yet
initialized, in which case iter_get_spi() will return -ERANGE. This is
expected and is handled properly. But for iter_next() and iter_destroy()
cases iter slot is supposed to be initialized and correct, so -ERANGE is
not possible.
Move meta->iter.{spi,frameno} initialization into iter_next/iter_destroy
handling branch to make it more explicit that valid information will be
remembered in meta->iter block for subsequent use in process_iter_next_call(),
avoiding confusingly looking -ERANGE assignment for meta->iter.spi.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230322232502.836171-1-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Xu reports that after commit 3f50f132d840 ("bpf: Verifier, do explicit ALU32
bounds tracking"), the following BPF program is rejected by the verifier:
0: (61) r2 = *(u32 *)(r1 +0) ; R2_w=pkt(off=0,r=0,imm=0)
1: (61) r3 = *(u32 *)(r1 +4) ; R3_w=pkt_end(off=0,imm=0)
2: (bf) r1 = r2
3: (07) r1 += 1
4: (2d) if r1 > r3 goto pc+8
5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff))
6: (18) r0 = 0x7fffffffffffff10
8: (0f) r1 += r0 ; R1_w=scalar(umin=0x7fffffffffffff10,umax=0x800000000000000f)
9: (18) r0 = 0x8000000000000000
11: (07) r0 += 1
12: (ad) if r0 < r1 goto pc-2
13: (b7) r0 = 0
14: (95) exit
And the verifier log says:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx(off=0,imm=0) R2_w=pkt(off=0,r=0,imm=0)
1: (61) r3 = *(u32 *)(r1 +4) ; R1=ctx(off=0,imm=0) R3_w=pkt_end(off=0,imm=0)
2: (bf) r1 = r2 ; R1_w=pkt(off=0,r=0,imm=0) R2_w=pkt(off=0,r=0,imm=0)
3: (07) r1 += 1 ; R1_w=pkt(off=1,r=0,imm=0)
4: (2d) if r1 > r3 goto pc+8 ; R1_w=pkt(off=1,r=1,imm=0) R3_w=pkt_end(off=0,imm=0)
5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff)) R2_w=pkt(off=0,r=1,imm=0)
6: (18) r0 = 0x7fffffffffffff10 ; R0_w=9223372036854775568
8: (0f) r1 += r0 ; R0_w=9223372036854775568 R1_w=scalar(umin=9223372036854775568,umax=9223372036854775823,s32_min=-240,s32_max=15)
9: (18) r0 = 0x8000000000000000 ; R0_w=-9223372036854775808
11: (07) r0 += 1 ; R0_w=-9223372036854775807
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775807 R1_w=scalar(umin=9223372036854775568,umax=9223372036854775809)
13: (b7) r0 = 0 ; R0_w=0
14: (95) exit
from 12 to 11: R0_w=-9223372036854775807 R1_w=scalar(umin=9223372036854775810,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775806
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775806 R1_w=scalar(umin=9223372036854775810,umax=9223372036854775810,var_off=(0x8000000000000000; 0xffffffff))
13: safe
[...]
from 12 to 11: R0_w=-9223372036854775795 R1=scalar(umin=9223372036854775822,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775794
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775794 R1=scalar(umin=9223372036854775822,umax=9223372036854775822,var_off=(0x8000000000000000; 0xffffffff))
13: safe
from 12 to 11: R0_w=-9223372036854775794 R1=scalar(umin=9223372036854775823,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775793
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775793 R1=scalar(umin=9223372036854775823,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff))
13: safe
from 12 to 11: R0_w=-9223372036854775793 R1=scalar(umin=9223372036854775824,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775792
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775792 R1=scalar(umin=9223372036854775824,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff))
13: safe
[...]
The 64bit umin=9223372036854775810 bound continuously bumps by +1 while
umax=9223372036854775823 stays as-is until the verifier complexity limit
is reached and the program gets finally rejected. During this simulation,
the umin also eventually surpasses umax. Looking at the first 'from 12
to 11' output line from the loop, R1 has the following state:
R1_w=scalar(umin=0x8000000000000002 (9223372036854775810),
umax=0x800000000000000f (9223372036854775823),
var_off=(0x8000000000000000;
0xffffffff))
The var_off has technically not an inconsistent state but it's very
imprecise and far off surpassing 64bit umax bounds whereas the expected
output with refined known bits in var_off should have been like:
R1_w=scalar(umin=0x8000000000000002 (9223372036854775810),
umax=0x800000000000000f (9223372036854775823),
var_off=(0x8000000000000000;
0xf))
In the above log, var_off stays as var_off=(0x8000000000000000; 0xffffffff)
and does not converge into a narrower mask where more bits become known,
eventually transforming R1 into a constant upon umin=9223372036854775823,
umax=9223372036854775823 case where the verifier would have terminated and
let the program pass.
The __reg_combine_64_into_32() marks the subregister unknown and propagates
64bit {s,u}min/{s,u}max bounds to their 32bit equivalents iff they are within
the 32bit universe. The question came up whether __reg_combine_64_into_32()
should special case the situation that when 64bit {s,u}min bounds have
the same value as 64bit {s,u}max bounds to then assign the latter as
well to the 32bit reg->{s,u}32_{min,max}_value. As can be seen from the
above example however, that is just /one/ special case and not a /generic/
solution given above example would still not be addressed this way and
remain at an imprecise var_off=(0x8000000000000000; 0xffffffff).
The improvement is needed in __reg_bound_offset() to refine var32_off with
the updated var64_off instead of the prior reg->var_off. The reg_bounds_sync()
code first refines information about the register's min/max bounds via
__update_reg_bounds() from the current var_off, then in __reg_deduce_bounds()
from sign bit and with the potentially learned bits from bounds it'll
update the var_off tnum in __reg_bound_offset(). For example, intersecting
with the old var_off might have improved bounds slightly, e.g. if umax
was 0x7f...f and var_off was (0; 0xf...fc), then new var_off will then
result in (0; 0x7f...fc). The intersected var64_off holds then the
universe which is a superset of var32_off. The point for the latter is
not to broaden, but to further refine known bits based on the intersection
of var_off with 32 bit bounds, so that we later construct the final var_off
from upper and lower 32 bits. The final __update_reg_bounds() can then
potentially still slightly refine bounds if more bits became known from the
new var_off.
After the improvement, we can see R1 converging successively:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx(off=0,imm=0) R2_w=pkt(off=0,r=0,imm=0)
1: (61) r3 = *(u32 *)(r1 +4) ; R1=ctx(off=0,imm=0) R3_w=pkt_end(off=0,imm=0)
2: (bf) r1 = r2 ; R1_w=pkt(off=0,r=0,imm=0) R2_w=pkt(off=0,r=0,imm=0)
3: (07) r1 += 1 ; R1_w=pkt(off=1,r=0,imm=0)
4: (2d) if r1 > r3 goto pc+8 ; R1_w=pkt(off=1,r=1,imm=0) R3_w=pkt_end(off=0,imm=0)
5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff)) R2_w=pkt(off=0,r=1,imm=0)
6: (18) r0 = 0x7fffffffffffff10 ; R0_w=9223372036854775568
8: (0f) r1 += r0 ; R0_w=9223372036854775568 R1_w=scalar(umin=9223372036854775568,umax=9223372036854775823,s32_min=-240,s32_max=15)
9: (18) r0 = 0x8000000000000000 ; R0_w=-9223372036854775808
11: (07) r0 += 1 ; R0_w=-9223372036854775807
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775807 R1_w=scalar(umin=9223372036854775568,umax=9223372036854775809)
13: (b7) r0 = 0 ; R0_w=0
14: (95) exit
from 12 to 11: R0_w=-9223372036854775807 R1_w=scalar(umin=9223372036854775810,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775806
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775806 R1_w=-9223372036854775806
13: safe
from 12 to 11: R0_w=-9223372036854775806 R1_w=scalar(umin=9223372036854775811,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775805
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775805 R1_w=-9223372036854775805
13: safe
[...]
from 12 to 11: R0_w=-9223372036854775798 R1=scalar(umin=9223372036854775819,umax=9223372036854775823,var_off=(0x8000000000000008; 0x7),s32_min=8,s32_max=15,u32_min=8,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775797
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775797 R1=-9223372036854775797
13: safe
from 12 to 11: R0_w=-9223372036854775797 R1=scalar(umin=9223372036854775820,umax=9223372036854775823,var_off=(0x800000000000000c; 0x3),s32_min=12,s32_max=15,u32_min=12,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775796
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775796 R1=-9223372036854775796
13: safe
from 12 to 11: R0_w=-9223372036854775796 R1=scalar(umin=9223372036854775821,umax=9223372036854775823,var_off=(0x800000000000000c; 0x3),s32_min=12,s32_max=15,u32_min=12,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775795
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775795 R1=-9223372036854775795
13: safe
from 12 to 11: R0_w=-9223372036854775795 R1=scalar(umin=9223372036854775822,umax=9223372036854775823,var_off=(0x800000000000000e; 0x1),s32_min=14,s32_max=15,u32_min=14,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775794
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775794 R1=-9223372036854775794
13: safe
from 12 to 11: R0_w=-9223372036854775794 R1=-9223372036854775793 R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775793
12: (ad) if r0 < r1 goto pc-2
last_idx 12 first_idx 12
parent didn't have regs=1 stack=0 marks: R0_rw=P-9223372036854775801 R1_r=scalar(umin=9223372036854775815,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
last_idx 11 first_idx 11
regs=1 stack=0 before 11: (07) r0 += 1
parent didn't have regs=1 stack=0 marks: R0_rw=P-9223372036854775805 R1_rw=scalar(umin=9223372036854775812,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
last_idx 12 first_idx 0
regs=1 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=1 stack=0 before 11: (07) r0 += 1
regs=1 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=1 stack=0 before 11: (07) r0 += 1
regs=1 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=1 stack=0 before 11: (07) r0 += 1
regs=1 stack=0 before 9: (18) r0 = 0x8000000000000000
last_idx 12 first_idx 12
parent didn't have regs=2 stack=0 marks: R0_rw=P-9223372036854775801 R1_r=Pscalar(umin=9223372036854775815,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
last_idx 11 first_idx 11
regs=2 stack=0 before 11: (07) r0 += 1
parent didn't have regs=2 stack=0 marks: R0_rw=P-9223372036854775805 R1_rw=Pscalar(umin=9223372036854775812,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
last_idx 12 first_idx 0
regs=2 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=2 stack=0 before 11: (07) r0 += 1
regs=2 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=2 stack=0 before 11: (07) r0 += 1
regs=2 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=2 stack=0 before 11: (07) r0 += 1
regs=2 stack=0 before 9: (18) r0 = 0x8000000000000000
regs=2 stack=0 before 8: (0f) r1 += r0
regs=3 stack=0 before 6: (18) r0 = 0x7fffffffffffff10
regs=2 stack=0 before 5: (71) r1 = *(u8 *)(r2 +0)
13: safe
from 4 to 13: safe
verification time 322 usec
stack depth 0
processed 56 insns (limit 1000000) max_states_per_insn 1 total_states 3 peak_states 3 mark_read 1
This also fixes up a test case along with this improvement where we match
on the verifier log. The updated log now has a refined var_off, too.
Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: Xu Kuohai <xukuohai@huaweicloud.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20230314203424.4015351-2-xukuohai@huaweicloud.com
Link: https://lore.kernel.org/bpf/20230322213056.2470-1-daniel@iogearbox.net
|
|
This patch changes the return types of bpf_map_ops functions to long, where
previously int was returned. Using long allows for bpf programs to maintain
the sign bit in the absence of sign extension during situations where
inlined bpf helper funcs make calls to the bpf_map_ops funcs and a negative
error is returned.
The definitions of the helper funcs are generated from comments in the bpf
uapi header at `include/uapi/linux/bpf.h`. The return type of these
helpers was previously changed from int to long in commit bdb7b79b4ce8. For
any case where one of the map helpers call the bpf_map_ops funcs that are
still returning 32-bit int, a compiler might not include sign extension
instructions to properly convert the 32-bit negative value a 64-bit
negative value.
For example:
bpf assembly excerpt of an inlined helper calling a kernel function and
checking for a specific error:
; err = bpf_map_update_elem(&mymap, &key, &val, BPF_NOEXIST);
...
46: call 0xffffffffe103291c ; htab_map_update_elem
; if (err && err != -EEXIST) {
4b: cmp $0xffffffffffffffef,%rax ; cmp -EEXIST,%rax
kernel function assembly excerpt of return value from
`htab_map_update_elem` returning 32-bit int:
movl $0xffffffef, %r9d
...
movl %r9d, %eax
...results in the comparison:
cmp $0xffffffffffffffef, $0x00000000ffffffef
Fixes: bdb7b79b4ce8 ("bpf: Switch most helper return values from 32-bit int to 64-bit long")
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Link: https://lore.kernel.org/r/20230322194754.185781-3-inwardvessel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Teach the verifier to recognize PTR_TO_MEM | MEM_RDONLY as not NULL
otherwise if (!bpf_ksym_exists(known_kfunc)) doesn't go through
dead code elimination.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230321203854.3035-3-alexei.starovoitov@gmail.com
|
|
We've seen recent AWS EKS (Kubernetes) user reports like the following:
After upgrading EKS nodes from v20230203 to v20230217 on our 1.24 EKS
clusters after a few days a number of the nodes have containers stuck
in ContainerCreating state or liveness/readiness probes reporting the
following error:
Readiness probe errored: rpc error: code = Unknown desc = failed to
exec in container: failed to start exec "4a11039f730203ffc003b7[...]":
OCI runtime exec failed: exec failed: unable to start container process:
unable to init seccomp: error loading seccomp filter into kernel:
error loading seccomp filter: errno 524: unknown
However, we had not been seeing this issue on previous AMIs and it only
started to occur on v20230217 (following the upgrade from kernel 5.4 to
5.10) with no other changes to the underlying cluster or workloads.
We tried the suggestions from that issue (sysctl net.core.bpf_jit_limit=452534528)
which helped to immediately allow containers to be created and probes to
execute but after approximately a day the issue returned and the value
returned by cat /proc/vmallocinfo | grep bpf_jit | awk '{s+=$2} END {print s}'
was steadily increasing.
I tested bpf tree to observe bpf_jit_charge_modmem, bpf_jit_uncharge_modmem
their sizes passed in as well as bpf_jit_current under tcpdump BPF filter,
seccomp BPF and native (e)BPF programs, and the behavior all looks sane
and expected, that is nothing "leaking" from an upstream perspective.
The bpf_jit_limit knob was originally added in order to avoid a situation
where unprivileged applications loading BPF programs (e.g. seccomp BPF
policies) consuming all the module memory space via BPF JIT such that loading
of kernel modules would be prevented. The default limit was defined back in
2018 and while good enough back then, we are generally seeing far more BPF
consumers today.
Adjust the limit for the BPF JIT pool from originally 1/4 to now 1/2 of the
module memory space to better reflect today's needs and avoid more users
running into potentially hard to debug issues.
Fixes: fdadd04931c2 ("bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K")
Reported-by: Stephen Haynes <sh@synk.net>
Reported-by: Lefteris Alexakis <lefteris.alexakis@kpn.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://github.com/awslabs/amazon-eks-ami/issues/1179
Link: https://github.com/awslabs/amazon-eks-ami/issues/1219
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230320143725.8394-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Now that the original _ftrace_direct APIs are gone, the "_multi"
suffixes only add confusion.
Link: https://lkml.kernel.org/r/20230321140424.345218-5-revest@chromium.org
Signed-off-by: Florent Revest <revest@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
A common pattern when using the ftrace_direct_multi API is to unregister
the ops and also immediately free its filter. We've noticed it's very
easy for users to miss calling ftrace_free_filter().
This adds a "free_filters" argument to unregister_ftrace_direct_multi()
to both remind the user they should free filters and also to make their
life easier.
Link: https://lkml.kernel.org/r/20230321140424.345218-2-revest@chromium.org
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Florent Revest <revest@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Allow ld_imm64 insn with BPF_PSEUDO_BTF_ID to hold the address of kfunc. The
ld_imm64 pointing to a valid kfunc will be seen as non-null PTR_TO_MEM by
is_branch_taken() logic of the verifier, while libbpf will resolve address to
unknown kfunc as ld_imm64 reg, 0 which will also be recognized by
is_branch_taken() and the verifier will proceed dead code elimination. BPF
programs can use this logic to detect at load time whether kfunc is present in
the kernel with bpf_ksym_exists() macro that is introduced in the next patches.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20230317201920.62030-2-alexei.starovoitov@gmail.com
|
|
Replace mutex_[un]lock() with cgroup_[un]lock() wrappers to stay
consistent across cgroup core and other subsystem code, while
operating on the cgroup_mutex.
Signed-off-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Moving find_kallsyms_symbol_value from kernel/module/internal.h to
include/linux/module.h. The reason is that internal.h is not prepared to
be included when CONFIG_MODULES=n. find_kallsyms_symbol_value is used by
kernel/bpf/verifier.c and including internal.h from it (without modules)
leads into a compilation error:
In file included from ../include/linux/container_of.h:5,
from ../include/linux/list.h:5,
from ../include/linux/timer.h:5,
from ../include/linux/workqueue.h:9,
from ../include/linux/bpf.h:10,
from ../include/linux/bpf-cgroup.h:5,
from ../kernel/bpf/verifier.c:7:
../kernel/bpf/../module/internal.h: In function 'mod_find':
../include/linux/container_of.h:20:54: error: invalid use of undefined type 'struct module'
20 | static_assert(__same_type(*(ptr), ((type *)0)->member) || \
| ^~
[...]
This patch fixes the above error.
Fixes: 31bf1dbccfb0 ("bpf: Fix attaching fentry/fexit/fmod_ret/lsm to modules")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/oe-kbuild-all/202303161404.OrmfCy09-lkp@intel.com/
Link: https://lore.kernel.org/bpf/20230317095601.386738-1-vmalik@redhat.com
|
|
For every BPF_ADD/SUB involving a pointer, adjust_ptr_min_max_vals()
ensures that the resulting pointer has a constant offset if
bypass_spec_v1 is false. This is ensured by calling sanitize_check_bounds()
which in turn calls check_stack_access_for_ptr_arithmetic(). There,
-EACCESS is returned if the register's offset is not constant, thereby
rejecting the program.
In summary, an unprivileged user must never be able to create stack
pointers with a variable offset. That is also the case, because a
respective check in check_stack_write() is missing. If they were able
to create a variable-offset pointer, users could still use it in a
stack-write operation to trigger unsafe speculative behavior [1].
Because unprivileged users must already be prevented from creating
variable-offset stack pointers, viable options are to either remove
this check (replacing it with a clarifying comment), or to turn it
into a "verifier BUG"-message, also adding a similar check in
check_stack_write() (for consistency, as a second-level defense).
This patch implements the first option to reduce verifier bloat.
This check was introduced by commit 01f810ace9ed ("bpf: Allow
variable-offset stack access") which correctly notes that
"variable-offset reads and writes are disallowed (they were already
disallowed for the indirect access case) because the speculative
execution checking code doesn't support them". However, it does not
further discuss why the check in check_stack_read() is necessary.
The code which made this check obsolete was also introduced in this
commit.
I have compiled ~650 programs from the Linux selftests, Linux samples,
Cilium, and libbpf/examples projects and confirmed that none of these
trigger the check in check_stack_read() [2]. Instead, all of these
programs are, as expected, already rejected when constructing the
variable-offset pointers. Note that the check in
check_stack_access_for_ptr_arithmetic() also prints "off=%d" while the
code removed by this patch does not (the error removed does not appear
in the "verification_error" values). For reproducibility, the
repository linked includes the raw data and scripts used to create
the plot.
[1] https://arxiv.org/pdf/1807.03757.pdf
[2] https://gitlab.cs.fau.de/un65esoq/bpf-spectre/-/raw/53dc19fcf459c186613b1156a81504b39c8d49db/data/plots/23-02-26_23-56_bpftool/bpftool/0004-errors.pdf?inline=false
Fixes: 01f810ace9ed ("bpf: Allow variable-offset stack access")
Signed-off-by: Luis Gerhorst <gerhorst@cs.fau.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230315165358.23701-1-gerhorst@cs.fau.de
|
|
Now that struct bpf_cpumask is RCU safe, there's no need for this kfunc.
Rather than doing the following:
private(MASK) static struct bpf_cpumask __kptr *global;
int BPF_PROG(prog, s32 cpu, ...)
{
struct bpf_cpumask *cpumask;
bpf_rcu_read_lock();
cpumask = bpf_cpumask_kptr_get(&global);
if (!cpumask) {
bpf_rcu_read_unlock();
return -1;
}
bpf_cpumask_setall(cpumask);
...
bpf_cpumask_release(cpumask);
bpf_rcu_read_unlock();
}
Programs can instead simply do (assume same global cpumask):
int BPF_PROG(prog, ...)
{
struct bpf_cpumask *cpumask;
bpf_rcu_read_lock();
cpumask = global;
if (!cpumask) {
bpf_rcu_read_unlock();
return -1;
}
bpf_cpumask_setall(cpumask);
...
bpf_rcu_read_unlock();
}
In other words, no extra atomic acquire / release, and less boilerplate
code.
This patch removes both the kfunc, as well as its selftests and
documentation.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230316054028.88924-5-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
struct bpf_cpumask is a BPF-wrapper around the struct cpumask type which
can be instantiated by a BPF program, and then queried as a cpumask in
similar fashion to normal kernel code. The previous patch in this series
makes the type fully RCU safe, so the type can be included in the
rcu_protected_type BTF ID list.
A subsequent patch will remove bpf_cpumask_kptr_get(), as it's no longer
useful now that we can just treat the type as RCU safe by default and do
our own if check.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230316054028.88924-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The struct bpf_cpumask type uses the bpf_mem_cache_{alloc,free}() APIs
to allocate and free its cpumasks. The bpf_mem allocator may currently
immediately reuse some memory when its freed, without waiting for an RCU
read cycle to elapse. We want to be able to treat struct bpf_cpumask
objects as completely RCU safe.
This is necessary for two reasons:
1. bpf_cpumask_kptr_get() currently does an RCU-protected
refcnt_inc_not_zero(). This of course assumes that the underlying
memory is not reused, and is therefore unsafe in its current form.
2. We want to be able to get rid of bpf_cpumask_kptr_get() entirely, and
intead use the superior kptr RCU semantics now afforded by the
verifier.
This patch fixes (1), and enables (2), by making struct bpf_cpumask RCU
safe. A subsequent patch will update the verifier to allow struct
bpf_cpumask * pointers to be passed to KF_RCU kfuncs, and then a latter
patch will remove bpf_cpumask_kptr_get().
Fixes: 516f4d3397c9 ("bpf: Enable cpumasks to be queried and used as kptrs")
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230316054028.88924-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This resolves two problems with attachment of fentry/fexit/fmod_ret/lsm
to functions located in modules:
1. The verifier tries to find the address to attach to in kallsyms. This
is always done by searching the entire kallsyms, not respecting the
module in which the function is located. Such approach causes an
incorrect attachment address to be computed if the function to attach
to is shadowed by a function of the same name located earlier in
kallsyms.
2. If the address to attach to is located in a module, the module
reference is only acquired in register_fentry. If the module is
unloaded between the place where the address is found
(bpf_check_attach_target in the verifier) and register_fentry, it is
possible that another module is loaded to the same address which may
lead to potential errors.
Since the attachment must contain the BTF of the program to attach to,
we extract the module from it and search for the function address in the
correct module (resolving problem no. 1). Then, the module reference is
taken directly in bpf_check_attach_target and stored in the bpf program
(in bpf_prog_aux). The reference is only released when the program is
unloaded (resolving problem no. 2).
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/3f6a9d8ae850532b5ef864ef16327b0f7a669063.1678432753.git.vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
