| Age | Commit message (Collapse) | Author |
|---|
|
Various block drivers call blk_set_queue_dying to mark a disk as dead due
to surprise removal events, but since commit 8e141f9eb803 that doesn't
work given that the GD_DEAD flag needs to be set to stop I/O.
Replace the driver calls to blk_set_queue_dying with a new (and properly
documented) blk_mark_disk_dead API, and fold blk_set_queue_dying into the
only remaining caller.
Fixes: 8e141f9eb803 ("block: drain file system I/O on del_gendisk")
Reported-by: Markus Blöchl <markus.bloechl@ipetronik.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20220217075231.1140-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Historically, the felix DSA driver has installed special traps such that
PTP over L2 works with the ocelot-8021q tagging protocol; commit
0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP
timestamping") has the details.
Then the ocelot switch library also gained more comprehensive support
for PTP traps through commit 96ca08c05838 ("net: mscc: ocelot: set up
traps for PTP packets").
Right now, PTP over L2 works using ocelot-8021q via the traps it has set
for itself, but nothing else does. Consolidating the two code blocks
would make ocelot-8021q gain support for PTP over L4 and tc-flower
traps, and at the same time avoid some code and TCAM duplication.
The traps are similar in intent, but different in execution, so some
explanation is required. The traps set up by felix_setup_mmio_filtering()
are VCAP IS1 filters, which have a PAG that chains them to a VCAP IS2
filter, and the IS2 is where the 'trap' action resides. The traps set up
by ocelot_trap_add(), on the other hand, have a single filter, in VCAP
IS2. The reason for chaining VCAP IS1 and IS2 in Felix was to ensure
that the hardcoded traps take precedence and cannot be overridden by the
Ocelot switch library.
So in principle, the PTP traps needed for ocelot-8021q in the Felix
driver can rely on ocelot_trap_add(), but the filters need to be patched
to account for a quirk that LS1028A has: the quirk_no_xtr_irq described
in commit 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP
timestamping"). Live-patching is done by iterating through the trap list
every time we know it has been updated, and transforming a trap into a
redirect + CPU copy if ocelot-8021q is in use.
Making the DSA ocelot-8021q tagger work with the Ocelot traps means we
can eliminate the dedicated OCELOT_VCAP_IS1_TAG_8021Q_PTP_MMIO and
OCELOT_VCAP_IS2_TAG_8021Q_PTP_MMIO cookies. To minimize the patch delta,
OCELOT_VCAP_IS2_MRP_TRAP takes the place of OCELOT_VCAP_IS2_TAG_8021Q_PTP_MMIO
(the alternative would have been to left-shift all cookie numbers by 1).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ocelot switch library does not need this information, but the felix
DSA driver does.
As a reminder, the VSC9959 switch in LS1028A doesn't have an IRQ line
for packet extraction, so to be notified that a PTP packet needs to be
dequeued, it receives that packet also over Ethernet, by setting up a
packet trap. The Felix driver needs to install special kinds of traps
for packets in need of RX timestamps, such that the packets are
replicated both over Ethernet and over the CPU port module.
But the Ocelot switch library sets up more than one trap for PTP event
messages; it also traps PTP general messages, MRP control messages etc.
Those packets don't need PTP timestamps, so there's no reason for the
Felix driver to send them to the CPU port module.
By knowing which traps need PTP timestamps, the Felix driver can
adjust the traps installed using ocelot_trap_add() such that only those
will actually get delivered to the CPU port module.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When using the ocelot-8021q tagging protocol, the CPU port isn't
configured as an NPI port, but is a regular port. So a "trap to CPU"
operation is actually a "redirect" operation. So DSA needs to set up the
trapping action one way or another, depending on the tagging protocol in
use.
To ease DSA's work of modifying the action, keep all currently installed
traps in a list, so that DSA can live-patch them when the tagging
protocol changes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
OCELOT_VCAP_IS2_TAG_8021Q_TXVLAN overlaps with OCELOT_VCAP_IS2_MRP_REDIRECT.
To avoid this, make OCELOT_VCAP_IS2_MRP_REDIRECT take the cookie region
from N to 2 * N - 1 (where N is ocelot->num_phys_ports).
To avoid any risk that the singleton (not per port) VCAP IS2 filters
overlap with per-port VCAP IS2 filters, we must ensure that the number
of singleton filters is smaller than the number of physical ports.
This is true right now, but may change in the future as switches with
less ports get supported, or more singleton filters get added. So to be
future-proof, let's move the singleton filters at the end of the range,
where they won't overlap with anything to their right.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MRP assist code installs a VCAP IS2 trapping rule for each port, but
since the key and the action is the same, just the ingress port mask
differs, there isn't any need to do this. We can save some space in the
TCAM by using a single filter and adjusting the ingress port mask.
Reuse the ocelot_trap_add() and ocelot_trap_del() functions for this
purpose.
Now that the cookies are no longer per port, we need to change the
allocation scheme such that MRP traps use a fixed number.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MRP frames are configured to be trapped to the CPU queue 7, and this
number is reflected in the extraction header. However, the information
isn't used anywhere, so just leave MRP frames to go to CPU queue 0
unless needed otherwise.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Every use case that needed VCAP filters (in order: DSA tag_8021q, MRP,
PTP traps) has hardcoded filter identifiers that worked well enough for
that use case alone. But when two or more of those use cases would be
used together, some of those identifiers would overlap, leading to
breakage.
Add definitions for each cookie and centralize them in ocelot_vcap.h,
such that the overlaps are more obvious.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Options parsing in now done from mptcp_incoming_options().
mptcp_parse_option() has been removed from mptcp.h when CONFIG_MPTCP is
defined but not when it is not.
Fixes: cfde141ea3fa ("mptcp: move option parsing into mptcp_incoming_options()")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ipv6 flowlabels historically require a reservation before use.
Optionally in exclusive mode (e.g., user-private).
Commit 59c820b2317f ("ipv6: elide flowlabel check if no exclusive
leases exist") introduced a fastpath that avoids this check when no
exclusive leases exist in the system, and thus any flowlabel use
will be granted.
That allows skipping the control operation to reserve a flowlabel
entirely. Though with a warning if the fast path fails:
This is an optimization. Robust applications still have to revert to
requesting leases if the fast path fails due to an exclusive lease.
Still, this is subtle. Better isolate network namespaces from each
other. Flowlabels are per-netns. Also record per-netns whether
exclusive leases are in use. Then behavior does not change based on
activity in other netns.
Changes
v2
- wrap in IS_ENABLED(CONFIG_IPV6) to avoid breakage if disabled
Fixes: 59c820b2317f ("ipv6: elide flowlabel check if no exclusive leases exist")
Link: https://lore.kernel.org/netdev/MWHPR2201MB1072BCCCFCE779E4094837ACD0329@MWHPR2201MB1072.namprd22.prod.outlook.com/
Reported-by: Congyu Liu <liu3101@purdue.edu>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Tested-by: Congyu Liu <liu3101@purdue.edu>
Link: https://lore.kernel.org/r/20220215160037.1976072-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, DSA programs VLANs on shared (DSA and CPU) ports each time it
does so on user ports. This is good for basic functionality but has
several limitations:
- the VLAN group which must reach the CPU may be radically different
from the VLAN group that must be autonomously forwarded by the switch.
In other words, the admin may want to isolate noisy stations and avoid
traffic from them going to the control processor of the switch, where
it would just waste useless cycles. The bridge already supports
independent control of VLAN groups on bridge ports and on the bridge
itself, and when VLAN-aware, it will drop packets in software anyway
if their VID isn't added as a 'self' entry towards the bridge device.
- Replaying host FDB entries may depend, for some drivers like mv88e6xxx,
on replaying the host VLANs as well. The 2 VLAN groups are
approximately the same in most regular cases, but there are corner
cases when timing matters, and DSA's approximation of replicating
VLANs on shared ports simply does not work.
- If a user makes the bridge (implicitly the CPU port) join a VLAN by
accident, there is no way for the CPU port to isolate itself from that
noisy VLAN except by rebooting the system. This is because for each
VLAN added on a user port, DSA will add it on shared ports too, but
for each VLAN deletion on a user port, it will remain installed on
shared ports, since DSA has no good indication of whether the VLAN is
still in use or not.
Now that the bridge driver emits well-balanced SWITCHDEV_OBJ_ID_PORT_VLAN
addition and removal events, DSA has a simple and straightforward task
of separating the bridge port VLANs (these have an orig_dev which is a
DSA slave interface, or a LAG interface) from the host VLANs (these have
an orig_dev which is a bridge interface), and to keep a simple reference
count of each VID on each shared port.
Forwarding VLANs must be installed on the bridge ports and on all DSA
ports interconnecting them. We don't have a good view of the exact
topology, so we simply install forwarding VLANs on all DSA ports, which
is what has been done until now.
Host VLANs must be installed primarily on the dedicated CPU port of each
bridge port. More subtly, they must also be installed on upstream-facing
and downstream-facing DSA ports that are connecting the bridge ports and
the CPU. This ensures that the mv88e6xxx's problem (VID of host FDB
entry may be absent from VTU) is still addressed even if that switch is
in a cross-chip setup, and it has no local CPU port.
Therefore:
- user ports contain only bridge port (forwarding) VLANs, and no
refcounting is necessary
- DSA ports contain both forwarding and host VLANs. Refcounting is
necessary among these 2 types.
- CPU ports contain only host VLANs. Refcounting is also necessary.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
interfaces
The switchdev_handle_port_obj_add() helper is good for replicating a
port object on the lower interfaces of @dev, if that object was emitted
on a bridge, or on a bridge port that is a LAG.
However, drivers that use this helper limit themselves to a box from
which they can no longer intercept port objects notified on neighbor
ports ("foreign interfaces").
One such driver is DSA, where software bridging with foreign interfaces
such as standalone NICs or Wi-Fi APs is an important use case. There, a
VLAN installed on a neighbor bridge port roughly corresponds to a
forwarding VLAN installed on the DSA switch's CPU port.
To support this use case while also making use of the benefits of the
switchdev_handle_* replication helper for port objects, introduce a new
variant of these functions that crawls through the neighbor ports of
@dev, in search of potentially compatible switchdev ports that are
interested in the event.
The strategy is identical to switchdev_handle_fdb_event_to_device():
if @dev wasn't a switchdev interface, then go one step upper, and
recursively call this function on the bridge that this port belongs to.
At the next recursion step, __switchdev_handle_port_obj_add() will
iterate through the bridge's lower interfaces. Among those, some will be
switchdev interfaces, and one will be the original @dev that we came
from. To prevent infinite recursion, we must suppress reentry into the
original @dev, and just call the @add_cb for the switchdev_interfaces.
It looks like this:
br0
/ | \
/ | \
/ | \
swp0 swp1 eth0
1. __switchdev_handle_port_obj_add(eth0)
-> check_cb(eth0) returns false
-> eth0 has no lower interfaces
-> eth0's bridge is br0
-> switchdev_lower_dev_find(br0, check_cb, foreign_dev_check_cb))
finds br0
2. __switchdev_handle_port_obj_add(br0)
-> check_cb(br0) returns false
-> netdev_for_each_lower_dev
-> check_cb(swp0) returns true, so we don't skip this interface
3. __switchdev_handle_port_obj_add(swp0)
-> check_cb(swp0) returns true, so we call add_cb(swp0)
(back to netdev_for_each_lower_dev from 2)
-> check_cb(swp1) returns true, so we don't skip this interface
4. __switchdev_handle_port_obj_add(swp1)
-> check_cb(swp1) returns true, so we call add_cb(swp1)
(back to netdev_for_each_lower_dev from 2)
-> check_cb(eth0) returns false, so we skip this interface to
avoid infinite recursion
Note: eth0 could have been a LAG, and we don't want to suppress the
recursion through its lowers if those exist, so when check_cb() returns
false, we still call switchdev_lower_dev_find() to estimate whether
there's anything worth a recursion beneath that LAG. Using check_cb()
and foreign_dev_check_cb(), switchdev_lower_dev_find() not only figures
out whether the lowers of the LAG are switchdev, but also whether they
actively offload the LAG or not (whether the LAG is "foreign" to the
switchdev interface or not).
The port_obj_info->orig_dev is preserved across recursive calls, so
switchdev drivers still know on which device was this notification
originally emitted.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
br_switchdev_port_vlan_add() currently emits a SWITCHDEV_PORT_OBJ_ADD
event with a SWITCHDEV_OBJ_ID_PORT_VLAN for 2 distinct cases:
- a struct net_bridge_vlan got created
- an existing struct net_bridge_vlan was modified
This makes it impossible for switchdev drivers to properly balance
PORT_OBJ_ADD with PORT_OBJ_DEL events, so if we want to allow that to
happen, we must provide a way for drivers to distinguish between a
VLAN with changed flags and a new one.
Annotate struct switchdev_obj_port_vlan with a "bool changed" that
distinguishes the 2 cases above.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Rework use of DMA_BIT_MASK in vmbus to work around a clang bug
(Michael Kelley)
- Fix NUMA topology (Long Li)
- Fix a memory leak in vmbus (Miaoqian Lin)
- One minor clean-up patch (Cai Huoqing)
* tag 'hyperv-fixes-signed-20220215' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: utils: Make use of the helper macro LIST_HEAD()
Drivers: hv: vmbus: Rework use of DMA_BIT_MASK(64)
Drivers: hv: vmbus: Fix memory leak in vmbus_add_channel_kobj
PCI: hv: Fix NUMA node assignment when kernel boots with custom NUMA topology
|
|
syzbot reported that two threads might write over agg_select_timer
at the same time. Make agg_select_timer atomic to fix the races.
BUG: KCSAN: data-race in bond_3ad_initiate_agg_selection / bond_3ad_state_machine_handler
read to 0xffff8881242aea90 of 4 bytes by task 1846 on cpu 1:
bond_3ad_state_machine_handler+0x99/0x2810 drivers/net/bonding/bond_3ad.c:2317
process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
worker_thread+0x616/0xa70 kernel/workqueue.c:2454
kthread+0x1bf/0x1e0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30
write to 0xffff8881242aea90 of 4 bytes by task 25910 on cpu 0:
bond_3ad_initiate_agg_selection+0x18/0x30 drivers/net/bonding/bond_3ad.c:1998
bond_open+0x658/0x6f0 drivers/net/bonding/bond_main.c:3967
__dev_open+0x274/0x3a0 net/core/dev.c:1407
dev_open+0x54/0x190 net/core/dev.c:1443
bond_enslave+0xcef/0x3000 drivers/net/bonding/bond_main.c:1937
do_set_master net/core/rtnetlink.c:2532 [inline]
do_setlink+0x94f/0x2500 net/core/rtnetlink.c:2736
__rtnl_newlink net/core/rtnetlink.c:3414 [inline]
rtnl_newlink+0xfeb/0x13e0 net/core/rtnetlink.c:3529
rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5594
netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2413
___sys_sendmsg net/socket.c:2467 [inline]
__sys_sendmsg+0x195/0x230 net/socket.c:2496
__do_sys_sendmsg net/socket.c:2505 [inline]
__se_sys_sendmsg net/socket.c:2503 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2503
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x00000050 -> 0x0000004f
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 25910 Comm: syz-executor.1 Tainted: G W 5.17.0-rc4-syzkaller-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
WWAN driver call's wwan_get_debugfs_dir() to obtain
WWAN debugfs dir entry. As part of this procedure it
returns a reference to a found device.
Since there is no debugfs interface available at WWAN
subsystem, it is not possible to drop dev reference post
debugfs use. This leads to side effects like post wwan
driver load and reload the wwan instance gets increment
from wwanX to wwanX+1.
A new debugfs interface is added in wwan subsystem so that
wwan driver can drop the obtained dev reference post debugfs
use.
void wwan_put_debugfs_dir(struct dentry *dir)
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Dave suggested a while ago (eleven years by now) "Let's make netif_rx()
work in all contexts and get rid of netif_rx_ni()". Eric agreed and
pointed out that modern devices should use netif_receive_skb() to avoid
the overhead.
In the meantime someone added another variant, netif_rx_any_context(),
which behaves as suggested.
netif_rx() must be invoked with disabled bottom halves to ensure that
pending softirqs, which were raised within the function, are handled.
netif_rx_ni() can be invoked only from process context (bottom halves
must be enabled) because the function handles pending softirqs without
checking if bottom halves were disabled or not.
netif_rx_any_context() invokes on the former functions by checking
in_interrupts().
netif_rx() could be taught to handle both cases (disabled and enabled
bottom halves) by simply disabling bottom halves while invoking
netif_rx_internal(). The local_bh_enable() invocation will then invoke
pending softirqs only if the BH-disable counter drops to zero.
Eric is concerned about the overhead of BH-disable+enable especially in
regard to the loopback driver. As critical as this driver is, it will
receive a shortcut to avoid the additional overhead which is not needed.
Add a local_bh_disable() section in netif_rx() to ensure softirqs are
handled if needed.
Provide __netif_rx() which does not disable BH and has a lockdep assert
to ensure that interrupts are disabled. Use this shortcut in the
loopback driver and in drivers/net/*.c.
Make netif_rx_ni() and netif_rx_any_context() invoke netif_rx() so they
can be removed once they are no more users left.
Link: https://lkml.kernel.org/r/20100415.020246.218622820.davem@davemloft.net
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot found a data-race [1] which lead me to add __rcu
annotations to netdev->qdisc, and proper accessors
to get LOCKDEP support.
[1]
BUG: KCSAN: data-race in dev_activate / qdisc_lookup_rcu
write to 0xffff888168ad6410 of 8 bytes by task 13559 on cpu 1:
attach_default_qdiscs net/sched/sch_generic.c:1167 [inline]
dev_activate+0x2ed/0x8f0 net/sched/sch_generic.c:1221
__dev_open+0x2e9/0x3a0 net/core/dev.c:1416
__dev_change_flags+0x167/0x3f0 net/core/dev.c:8139
rtnl_configure_link+0xc2/0x150 net/core/rtnetlink.c:3150
__rtnl_newlink net/core/rtnetlink.c:3489 [inline]
rtnl_newlink+0xf4d/0x13e0 net/core/rtnetlink.c:3529
rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5594
netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2413
___sys_sendmsg net/socket.c:2467 [inline]
__sys_sendmsg+0x195/0x230 net/socket.c:2496
__do_sys_sendmsg net/socket.c:2505 [inline]
__se_sys_sendmsg net/socket.c:2503 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2503
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff888168ad6410 of 8 bytes by task 13560 on cpu 0:
qdisc_lookup_rcu+0x30/0x2e0 net/sched/sch_api.c:323
__tcf_qdisc_find+0x74/0x3a0 net/sched/cls_api.c:1050
tc_del_tfilter+0x1c7/0x1350 net/sched/cls_api.c:2211
rtnetlink_rcv_msg+0x5ba/0x7e0 net/core/rtnetlink.c:5585
netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2413
___sys_sendmsg net/socket.c:2467 [inline]
__sys_sendmsg+0x195/0x230 net/socket.c:2496
__do_sys_sendmsg net/socket.c:2505 [inline]
__se_sys_sendmsg net/socket.c:2503 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2503
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0xffffffff85dee080 -> 0xffff88815d96ec00
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 13560 Comm: syz-executor.2 Not tainted 5.17.0-rc3-syzkaller-00116-gf1baf68e1383-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 470502de5bdb ("net: sched: unlock rules update API")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mv88e6xxx is special among DSA drivers in that it requires the VTU to
contain the VID of the FDB entry it modifies in
mv88e6xxx_port_db_load_purge(), otherwise it will return -EOPNOTSUPP.
Sometimes due to races this is not always satisfied even if external
code does everything right (first deletes the FDB entries, then the
VLAN), because DSA commits to hardware FDB entries asynchronously since
commit c9eb3e0f8701 ("net: dsa: Add support for learning FDB through
notification").
Therefore, the mv88e6xxx driver must close this race condition by
itself, by asking DSA to flush the switchdev workqueue of any FDB
deletions in progress, prior to exiting a VLAN.
Fixes: c9eb3e0f8701 ("net: dsa: Add support for learning FDB through notification")
Reported-by: Rafael Richter <rafael.richter@gin.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some time ago 8965779d2c0e ("ipv6,mcast: always hold idev->lock before mca_lock")
switched ipv6_get_lladdr() to __ipv6_get_lladdr(), which is rcu-unsafe
version. That was OK, because idev->lock was held for these codepaths.
In 88e2ca308094 ("mld: convert ifmcaddr6 to RCU") these external locks were
removed, so we probably need to restore the original rcu-safe call.
Otherwise, we occasionally get a machine crashed/stalled with the following
in dmesg:
[ 3405.966610][T230589] general protection fault, probably for non-canonical address 0xdead00000000008c: 0000 [#1] SMP NOPTI
[ 3405.982083][T230589] CPU: 44 PID: 230589 Comm: kworker/44:3 Tainted: G O 5.15.19-cloudflare-2022.2.1 #1
[ 3405.998061][T230589] Hardware name: SUPA-COOL-SERV
[ 3406.009552][T230589] Workqueue: mld mld_ifc_work
[ 3406.017224][T230589] RIP: 0010:__ipv6_get_lladdr+0x34/0x60
[ 3406.025780][T230589] Code: 57 10 48 83 c7 08 48 89 e5 48 39 d7 74 3e 48 8d 82 38 ff ff ff eb 13 48 8b 90 d0 00 00 00 48 8d 82 38 ff ff ff 48 39 d7 74 22 <66> 83 78 32 20 77 1b 75 e4 89 ca 23 50 2c 75 dd 48 8b 50 08 48 8b
[ 3406.055748][T230589] RSP: 0018:ffff94e4b3fc3d10 EFLAGS: 00010202
[ 3406.065617][T230589] RAX: dead00000000005a RBX: ffff94e4b3fc3d30 RCX: 0000000000000040
[ 3406.077477][T230589] RDX: dead000000000122 RSI: ffff94e4b3fc3d30 RDI: ffff8c3a31431008
[ 3406.089389][T230589] RBP: ffff94e4b3fc3d10 R08: 0000000000000000 R09: 0000000000000000
[ 3406.101445][T230589] R10: ffff8c3a31430000 R11: 000000000000000b R12: ffff8c2c37887100
[ 3406.113553][T230589] R13: ffff8c3a39537000 R14: 00000000000005dc R15: ffff8c3a31431000
[ 3406.125730][T230589] FS: 0000000000000000(0000) GS:ffff8c3b9fc80000(0000) knlGS:0000000000000000
[ 3406.138992][T230589] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3406.149895][T230589] CR2: 00007f0dfea1db60 CR3: 000000387b5f2000 CR4: 0000000000350ee0
[ 3406.162421][T230589] Call Trace:
[ 3406.170235][T230589] <TASK>
[ 3406.177736][T230589] mld_newpack+0xfe/0x1a0
[ 3406.186686][T230589] add_grhead+0x87/0xa0
[ 3406.195498][T230589] add_grec+0x485/0x4e0
[ 3406.204310][T230589] ? newidle_balance+0x126/0x3f0
[ 3406.214024][T230589] mld_ifc_work+0x15d/0x450
[ 3406.223279][T230589] process_one_work+0x1e6/0x380
[ 3406.232982][T230589] worker_thread+0x50/0x3a0
[ 3406.242371][T230589] ? rescuer_thread+0x360/0x360
[ 3406.252175][T230589] kthread+0x127/0x150
[ 3406.261197][T230589] ? set_kthread_struct+0x40/0x40
[ 3406.271287][T230589] ret_from_fork+0x22/0x30
[ 3406.280812][T230589] </TASK>
[ 3406.288937][T230589] Modules linked in: ... [last unloaded: kheaders]
[ 3406.476714][T230589] ---[ end trace 3525a7655f2f3b9e ]---
Fixes: 88e2ca308094 ("mld: convert ifmcaddr6 to RCU")
Reported-by: David Pinilla Caparros <dpini@cloudflare.com>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create and utilize bulk regmap reads instead of single access for gathering
stats. The background reading of statistics happens frequently, and over
a few contiguous memory regions.
High speed PCIe buses and MMIO access will probably see negligible
performance increase. Lower speed buses like SPI and I2C could see
significant performance increase, since the bus configuration and register
access times account for a large percentage of data transfer time.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Regmap supports bulk register reads. Ocelot does not. This patch adds
support for Ocelot to invoke bulk regmap reads. That will allow any driver
that performs consecutive reads over memory regions to optimize that
access.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the ocelot.h file, several read / write macros were split across
multiple lines, while others weren't. Split all macros that exceed the 80
character column width and match the style of the rest of the file.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The problem I'm addressing was discovered by the LTP test covering
cve-2018-1000204.
A short description of what happens follows:
1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO
interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV
and a corresponding dxferp. The peculiar thing about this is that TUR
is not reading from the device.
2) In sg_start_req() the invocation of blk_rq_map_user() effectively
bounces the user-space buffer. As if the device was to transfer into
it. Since commit a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in
sg_build_indirect()") we make sure this first bounce buffer is
allocated with GFP_ZERO.
3) For the rest of the story we keep ignoring that we have a TUR, so the
device won't touch the buffer we prepare as if the we had a
DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device
and the buffer allocated by SG is mapped by the function
virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here
scatter-gather and not scsi generics). This mapping involves bouncing
via the swiotlb (we need swiotlb to do virtio in protected guest like
s390 Secure Execution, or AMD SEV).
4) When the SCSI TUR is done, we first copy back the content of the second
(that is swiotlb) bounce buffer (which most likely contains some
previous IO data), to the first bounce buffer, which contains all
zeros. Then we copy back the content of the first bounce buffer to
the user-space buffer.
5) The test case detects that the buffer, which it zero-initialized,
ain't all zeros and fails.
One can argue that this is an swiotlb problem, because without swiotlb
we leak all zeros, and the swiotlb should be transparent in a sense that
it does not affect the outcome (if all other participants are well
behaved).
Copying the content of the original buffer into the swiotlb buffer is
the only way I can think of to make swiotlb transparent in such
scenarios. So let's do just that if in doubt, but allow the driver
to tell us that the whole mapped buffer is going to be overwritten,
in which case we can preserve the old behavior and avoid the performance
impact of the extra bounce.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Borislav Petkov:
"Fix a case where objtool would mistakenly warn about instructions
being unreachable"
* tag 'objtool_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bug: Merge annotate_reachable() into _BUG_FLAGS() asm
|
|
With GCC 12, -Wstringop-overread was warning about an implicit cast from
char[6] to char[8]. However, the extra 2 bytes are always thrown away,
alignment doesn't matter, and the risk of hitting the edge of unallocated
memory has been accepted, so this prototype can just be converted to a
regular char *. Silences:
net/core/dev.c: In function ‘bpf_prog_run_generic_xdp’: net/core/dev.c:4618:21: warning: ‘ether_addr_equal_64bits’ reading 8 bytes from a region of size 6 [-Wstringop-overread]
4618 | orig_host = ether_addr_equal_64bits(eth->h_dest, > skb->dev->dev_addr);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/core/dev.c:4618:21: note: referencing argument 1 of type ‘const u8[8]’ {aka ‘const unsigned char[8]’}
net/core/dev.c:4618:21: note: referencing argument 2 of type ‘const u8[8]’ {aka ‘const unsigned char[8]’}
In file included from net/core/dev.c:91: include/linux/etherdevice.h:375:20: note: in a call to function ‘ether_addr_equal_64bits’
375 | static inline bool ether_addr_equal_64bits(const u8 addr1[6+2],
| ^~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/netdev/20220212090811.uuzk6d76agw2vv73@pengutronix.de
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Merge misc fixes from Andrew Morton:
"5 patches.
Subsystems affected by this patch series: binfmt, procfs, and mm
(vmscan, memcg, and kfence)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kfence: make test case compatible with run time set sample interval
mm: memcg: synchronize objcg lists with a dedicated spinlock
mm: vmscan: remove deadlock due to throttling failing to make progress
fs/proc: task_mmu.c: don't read mapcount for migration entry
fs/binfmt_elf: fix PT_LOAD p_align values for loaders
|
|
The parameter kfence_sample_interval can be set via boot parameter and
late shell command, which is convenient for automated tests and KFENCE
parameter optimization. However, KFENCE test case just uses
compile-time CONFIG_KFENCE_SAMPLE_INTERVAL, which will make KFENCE test
case not run as users desired. Export kfence_sample_interval, so that
KFENCE test case can use run-time-set sample interval.
Link: https://lkml.kernel.org/r/20220207034432.185532-1-liupeng256@huawei.com
Signed-off-by: Peng Liu <liupeng256@huawei.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Christian Knig <christian.koenig@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Alexander reported a circular lock dependency revealed by the mmap1 ltp
test:
LOCKDEP_CIRCULAR (suite: ltp, case: mtest06 (mmap1))
WARNING: possible circular locking dependency detected
5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1 Not tainted
------------------------------------------------------
mmap1/202299 is trying to acquire lock:
00000001892c0188 (css_set_lock){..-.}-{2:2}, at: obj_cgroup_release+0x4a/0xe0
but task is already holding lock:
00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&sighand->siglock){-.-.}-{2:2}:
__lock_acquire+0x604/0xbd8
lock_acquire.part.0+0xe2/0x238
lock_acquire+0xb0/0x200
_raw_spin_lock_irqsave+0x6a/0xd8
__lock_task_sighand+0x90/0x190
cgroup_freeze_task+0x2e/0x90
cgroup_migrate_execute+0x11c/0x608
cgroup_update_dfl_csses+0x246/0x270
cgroup_subtree_control_write+0x238/0x518
kernfs_fop_write_iter+0x13e/0x1e0
new_sync_write+0x100/0x190
vfs_write+0x22c/0x2d8
ksys_write+0x6c/0xf8
__do_syscall+0x1da/0x208
system_call+0x82/0xb0
-> #0 (css_set_lock){..-.}-{2:2}:
check_prev_add+0xe0/0xed8
validate_chain+0x736/0xb20
__lock_acquire+0x604/0xbd8
lock_acquire.part.0+0xe2/0x238
lock_acquire+0xb0/0x200
_raw_spin_lock_irqsave+0x6a/0xd8
obj_cgroup_release+0x4a/0xe0
percpu_ref_put_many.constprop.0+0x150/0x168
drain_obj_stock+0x94/0xe8
refill_obj_stock+0x94/0x278
obj_cgroup_charge+0x164/0x1d8
kmem_cache_alloc+0xac/0x528
__sigqueue_alloc+0x150/0x308
__send_signal+0x260/0x550
send_signal+0x7e/0x348
force_sig_info_to_task+0x104/0x180
force_sig_fault+0x48/0x58
__do_pgm_check+0x120/0x1f0
pgm_check_handler+0x11e/0x180
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&sighand->siglock);
lock(css_set_lock);
lock(&sighand->siglock);
lock(css_set_lock);
*** DEADLOCK ***
2 locks held by mmap1/202299:
#0: 00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180
#1: 00000001892ad560 (rcu_read_lock){....}-{1:2}, at: percpu_ref_put_many.constprop.0+0x0/0x168
stack backtrace:
CPU: 15 PID: 202299 Comm: mmap1 Not tainted 5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1
Hardware name: IBM 3906 M04 704 (LPAR)
Call Trace:
dump_stack_lvl+0x76/0x98
check_noncircular+0x136/0x158
check_prev_add+0xe0/0xed8
validate_chain+0x736/0xb20
__lock_acquire+0x604/0xbd8
lock_acquire.part.0+0xe2/0x238
lock_acquire+0xb0/0x200
_raw_spin_lock_irqsave+0x6a/0xd8
obj_cgroup_release+0x4a/0xe0
percpu_ref_put_many.constprop.0+0x150/0x168
drain_obj_stock+0x94/0xe8
refill_obj_stock+0x94/0x278
obj_cgroup_charge+0x164/0x1d8
kmem_cache_alloc+0xac/0x528
__sigqueue_alloc+0x150/0x308
__send_signal+0x260/0x550
send_signal+0x7e/0x348
force_sig_info_to_task+0x104/0x180
force_sig_fault+0x48/0x58
__do_pgm_check+0x120/0x1f0
pgm_check_handler+0x11e/0x180
INFO: lockdep is turned off.
In this example a slab allocation from __send_signal() caused a
refilling and draining of a percpu objcg stock, resulted in a releasing
of another non-related objcg. Objcg release path requires taking the
css_set_lock, which is used to synchronize objcg lists.
This can create a circular dependency with the sighandler lock, which is
taken with the locked css_set_lock by the freezer code (to freeze a
task).
In general it seems that using css_set_lock to synchronize objcg lists
makes any slab allocations and deallocation with the locked css_set_lock
and any intervened locks risky.
To fix the problem and make the code more robust let's stop using
css_set_lock to synchronize objcg lists and use a new dedicated spinlock
instead.
Link: https://lkml.kernel.org/r/Yfm1IHmoGdyUR81T@carbon.dhcp.thefacebook.com
Fixes: bf4f059954dc ("mm: memcg/slab: obj_cgroup API")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is a fairly large set of bugfixes, most of which had been sent a
while ago but only now made it into the soc tree:
Maintainer file updates:
- Claudiu Beznea now co-maintains the at91 soc family, replacing
Ludovic Desroches.
- Michael Walle maintains the sl28cpld drivers
- Alain Volmat and Raphael Gallais-Pou take over some drivers for ST
platforms
- Alim Akhtar is an additional reviewer for Samsung platforms
Code fixes:
- Op-tee had a problem with object lifetime that needs a slightly
complex fix, as well as another bug with error handling.
- Several minor issues for the OMAP platform, including a regression
with the timer
- A Kconfig change to fix a build-time issue on Intel SoCFPGA
Device tree fixes:
- The Amlogic Meson platform fixes a boot regression on am1-odroid, a
spurious interrupt, and a problem with reserved memory regions
- In the i.MX platform, several bug fixes are needed to make devices
work correctly: SD card detection, alarmtimer, and sound card on
some board. One patch for the GPU got in there by accident and gets
reverted again.
- TI K3 needs a fix for J721S2 serial port numbers
- ux500 needs a fix to mount the SD card as root on the Skomer phone"
* tag 'soc-fixes-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (46 commits)
Revert "arm64: dts: imx8mn-venice-gw7902: disable gpu"
arm64: Remove ARCH_VULCAN
MAINTAINERS: add myself as a maintainer for the sl28cpld
MAINTAINERS: add IRC to ARM sub-architectures and Devicetree
MAINTAINERS: arm: samsung: add Git tree and IRC
ARM: dts: Fix boot regression on Skomer
ARM: dts: spear320: Drop unused and undocumented 'irq-over-gpio' property
soc: aspeed: lpc-ctrl: Block error printing on probe defer cases
docs/ABI: testing: aspeed-uart-routing: Escape asterisk
MAINTAINERS: update drm/stm drm/sti and cec/sti maintainers
MAINTAINERS: Update Benjamin Gaignard maintainer status
ARM: socfpga: fix missing RESET_CONTROLLER
arm64: dts: meson-sm1-odroid: fix boot loop after reboot
arm64: dts: meson-g12: drop BL32 region from SEI510/SEI610
arm64: dts: meson-g12: add ATF BL32 reserved-memory region
arm64: dts: meson-gx: add ATF BL32 reserved-memory region
arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO domain for GPIOE_2
arm64: dts: meson-sm1-odroid: use correct enable-gpio pin for tf-io regulator
arm64: dts: meson-g12b-odroid-n2: fix typo 'dio2133'
optee: use driver internal tee_context for some rpc
...
|
|
The patch in [1] intends to fix a bpf_timer related issue,
but the fix caused existing 'timer' selftest to fail with
hang or some random errors. After some debug, I found
an issue with check_and_init_map_value() in the hashtab.c.
More specifically, in hashtab.c, we have code
l_new = bpf_map_kmalloc_node(&htab->map, ...)
check_and_init_map_value(&htab->map, l_new...)
Note that bpf_map_kmalloc_node() does not do initialization
so l_new contains random value.
The function check_and_init_map_value() intends to zero the
bpf_spin_lock and bpf_timer if they exist in the map.
But I found bpf_spin_lock is zero'ed but bpf_timer is not zero'ed.
With [1], later copy_map_value() skips copying of
bpf_spin_lock and bpf_timer. The non-zero bpf_timer caused
random failures for 'timer' selftest.
Without [1], for both bpf_spin_lock and bpf_timer case,
bpf_timer will be zero'ed, so 'timer' self test is okay.
For check_and_init_map_value(), why bpf_spin_lock is zero'ed
properly while bpf_timer not. In bpf uapi header, we have
struct bpf_spin_lock {
__u32 val;
};
struct bpf_timer {
__u64 :64;
__u64 :64;
} __attribute__((aligned(8)));
The initialization code:
*(struct bpf_spin_lock *)(dst + map->spin_lock_off) =
(struct bpf_spin_lock){};
*(struct bpf_timer *)(dst + map->timer_off) =
(struct bpf_timer){};
It appears the compiler has no obligation to initialize anonymous fields.
For example, let us use clang with bpf target as below:
$ cat t.c
struct bpf_timer {
unsigned long long :64;
};
struct bpf_timer2 {
unsigned long long a;
};
void test(struct bpf_timer *t) {
*t = (struct bpf_timer){};
}
void test2(struct bpf_timer2 *t) {
*t = (struct bpf_timer2){};
}
$ clang -target bpf -O2 -c -g t.c
$ llvm-objdump -d t.o
...
0000000000000000 <test>:
0: 95 00 00 00 00 00 00 00 exit
0000000000000008 <test2>:
1: b7 02 00 00 00 00 00 00 r2 = 0
2: 7b 21 00 00 00 00 00 00 *(u64 *)(r1 + 0) = r2
3: 95 00 00 00 00 00 00 00 exit
gcc11.2 does not have the above issue. But from
INTERNATIONAL STANDARD ©ISO/IEC ISO/IEC 9899:201x
Programming languages — C
http://www.open-std.org/Jtc1/sc22/wg14/www/docs/n1547.pdf
page 157:
Except where explicitly stated otherwise, for the purposes of
this subclause unnamed members of objects of structure and union
type do not participate in initialization. Unnamed members of
structure objects have indeterminate value even after initialization.
To fix the problem, let use memset for bpf_timer case in
check_and_init_map_value(). For consistency, memset is also
used for bpf_spin_lock case.
[1] https://lore.kernel.org/bpf/20220209070324.1093182-2-memxor@gmail.com/
Fixes: 68134668c17f3 ("bpf: Add map side support for bpf timers.")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220211194953.3142152-1-yhs@fb.com
|
|
When both bpf_spin_lock and bpf_timer are present in a BPF map value,
copy_map_value needs to skirt both objects when copying a value into and
out of the map. However, the current code does not set both s_off and
t_off in copy_map_value, which leads to a crash when e.g. bpf_spin_lock
is placed in map value with bpf_timer, as bpf_map_update_elem call will
be able to overwrite the other timer object.
When the issue is not fixed, an overwriting can produce the following
splat:
[root@(none) bpf]# ./test_progs -t timer_crash
[ 15.930339] bpf_testmod: loading out-of-tree module taints kernel.
[ 16.037849] ==================================================================
[ 16.038458] BUG: KASAN: user-memory-access in __pv_queued_spin_lock_slowpath+0x32b/0x520
[ 16.038944] Write of size 8 at addr 0000000000043ec0 by task test_progs/325
[ 16.039399]
[ 16.039514] CPU: 0 PID: 325 Comm: test_progs Tainted: G OE 5.16.0+ #278
[ 16.039983] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.15.0-1 04/01/2014
[ 16.040485] Call Trace:
[ 16.040645] <TASK>
[ 16.040805] dump_stack_lvl+0x59/0x73
[ 16.041069] ? __pv_queued_spin_lock_slowpath+0x32b/0x520
[ 16.041427] kasan_report.cold+0x116/0x11b
[ 16.041673] ? __pv_queued_spin_lock_slowpath+0x32b/0x520
[ 16.042040] __pv_queued_spin_lock_slowpath+0x32b/0x520
[ 16.042328] ? memcpy+0x39/0x60
[ 16.042552] ? pv_hash+0xd0/0xd0
[ 16.042785] ? lockdep_hardirqs_off+0x95/0xd0
[ 16.043079] __bpf_spin_lock_irqsave+0xdf/0xf0
[ 16.043366] ? bpf_get_current_comm+0x50/0x50
[ 16.043608] ? jhash+0x11a/0x270
[ 16.043848] bpf_timer_cancel+0x34/0xe0
[ 16.044119] bpf_prog_c4ea1c0f7449940d_sys_enter+0x7c/0x81
[ 16.044500] bpf_trampoline_6442477838_0+0x36/0x1000
[ 16.044836] __x64_sys_nanosleep+0x5/0x140
[ 16.045119] do_syscall_64+0x59/0x80
[ 16.045377] ? lock_is_held_type+0xe4/0x140
[ 16.045670] ? irqentry_exit_to_user_mode+0xa/0x40
[ 16.046001] ? mark_held_locks+0x24/0x90
[ 16.046287] ? asm_exc_page_fault+0x1e/0x30
[ 16.046569] ? asm_exc_page_fault+0x8/0x30
[ 16.046851] ? lockdep_hardirqs_on+0x7e/0x100
[ 16.047137] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 16.047405] RIP: 0033:0x7f9e4831718d
[ 16.047602] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48
[ 16.048764] RSP: 002b:00007fff488086b8 EFLAGS: 00000206 ORIG_RAX: 0000000000000023
[ 16.049275] RAX: ffffffffffffffda RBX: 00007f9e48683740 RCX: 00007f9e4831718d
[ 16.049747] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007fff488086d0
[ 16.050225] RBP: 00007fff488086f0 R08: 00007fff488085d7 R09: 00007f9e4cb594a0
[ 16.050648] R10: 0000000000000000 R11: 0000000000000206 R12: 00007f9e484cde30
[ 16.051124] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 16.051608] </TASK>
[ 16.051762] ==================================================================
Fixes: 68134668c17f ("bpf: Add map side support for bpf timers.")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220209070324.1093182-2-memxor@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These revert two commits that turned out to be problematic and fix two
issues related to wakeup from suspend-to-idle on x86.
Specifics:
- Revert a recent change that attempted to avoid issues with
conflicting address ranges during PCI initialization, because it
turned out to introduce a regression (Hans de Goede).
- Revert a change that limited EC GPE wakeups from suspend-to-idle to
systems based on Intel hardware, because it turned out that systems
based on hardware from other vendors depended on that functionality
too (Mario Limonciello).
- Fix two issues related to the handling of wakeup interrupts and
wakeup events signaled through the EC GPE during suspend-to-idle on
x86 (Rafael Wysocki)"
* tag 'acpi-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86/PCI: revert "Ignore E820 reservations for bridge windows on newer systems"
PM: s2idle: ACPI: Fix wakeup interrupts handling
ACPI: PM: s2idle: Cancel wakeup before dispatching EC GPE
ACPI: PM: Revert "Only mark EC GPE for wakeup on Intel systems"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
wireless-next patches for v5.18
First set of patches for v5.18, with both wireless and stack patches.
rtw89 now has AP mode support and wcn36xx has survey support. But
otherwise pretty normal.
Major changes:
ath11k
* add LDPC FEC type in 802.11 radiotap header
* enable RX PPDU stats in monitor co-exist mode
wcn36xx
* implement survey reporting
brcmfmac
* add CYW43570 PCIE device
rtw88
* rtw8821c: enable RFE 6 devices
rtw89
* AP mode support
mt76
* mt7916 support
* background radar detection support
|
|
This counter has never been visible, there is little point
trying to maintain it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Although we can control SMC handshake limitation through socket options,
which means that applications who need it must modify their code. It's
quite troublesome for many existing applications. This patch modifies
the global default value of SMC handshake limitation through netlink,
providing a way to put constraint on handshake without modifies any code
for applications.
Suggested-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch aims to add dynamic control for SMC handshake limitation for
every smc sockets, in production environment, it is possible for the
same applications to handle different service types, and may have
different opinion on SMC handshake limitation.
This patch try socket options to complete it, since we don't have socket
option level for SMC yet, which requires us to implement it at the same
time.
This patch does the following:
- add new socket option level: SOL_SMC.
- add new SMC socket option: SMC_LIMIT_HS.
- provide getter/setter for SMC socket options.
Link: https://lore.kernel.org/all/20f504f961e1a803f85d64229ad84260434203bd.1644323503.git.alibuda@linux.alibaba.com/
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch intends to provide a mechanism to put constraint on SMC
connections visit according to the pressure of SMC handshake process.
At present, frequent visits will cause the incoming connections to be
backlogged in SMC handshake queue, raise the connections established
time. Which is quite unacceptable for those applications who base on
short lived connections.
There are two ways to implement this mechanism:
1. Put limitation after TCP established.
2. Put limitation before TCP established.
In the first way, we need to wait and receive CLC messages that the
client will potentially send, and then actively reply with a decline
message, in a sense, which is also a sort of SMC handshake, affect the
connections established time on its way.
In the second way, the only problem is that we need to inject SMC logic
into TCP when it is about to reply the incoming SYN, since we already do
that, it's seems not a problem anymore. And advantage is obvious, few
additional processes are required to complete the constraint.
This patch use the second way. After this patch, connections who beyond
constraint will not informed any SMC indication, and SMC will not be
involved in any of its subsequent processes.
Link: https://lore.kernel.org/all/1641301961-59331-1-git-send-email-alibuda@linux.alibaba.com/
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and can.
Current release - new code bugs:
- sparx5: fix get_stat64 out-of-bound access and crash
- smc: fix netdev ref tracker misuse
Previous releases - regressions:
- eth: ixgbevf: require large buffers for build_skb on 82599VF, avoid
overflows
- eth: ocelot: fix all IP traffic getting trapped to CPU with PTP
over IP
- bonding: fix rare link activation misses in 802.3ad mode
Previous releases - always broken:
- tcp: fix tcp sock mem accounting in zero-copy corner cases
- remove the cached dst when uncloning an skb dst and its metadata,
since we only have one ref it'd lead to an UaF
- netfilter:
- conntrack: don't refresh sctp entries in closed state
- conntrack: re-init state for retransmitted syn-ack, avoid
connection establishment getting stuck with strange stacks
- ctnetlink: disable helper autoassign, avoid it getting lost
- nft_payload: don't allow transport header access for fragments
- dsa: fix use of devres for mdio throughout drivers
- eth: amd-xgbe: disable interrupts during pci removal
- eth: dpaa2-eth: unregister netdev before disconnecting the PHY
- eth: ice: fix IPIP and SIT TSO offload"
* tag 'net-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: dsa: mv88e6xxx: fix use-after-free in mv88e6xxx_mdios_unregister
net: mscc: ocelot: fix mutex lock error during ethtool stats read
ice: Avoid RTNL lock when re-creating auxiliary device
ice: Fix KASAN error in LAG NETDEV_UNREGISTER handler
ice: fix IPIP and SIT TSO offload
ice: fix an error code in ice_cfg_phy_fec()
net: mpls: Fix GCC 12 warning
dpaa2-eth: unregister the netdev before disconnecting from the PHY
skbuff: cleanup double word in comment
net: macb: Align the dma and coherent dma masks
mptcp: netlink: process IPv6 addrs in creating listening sockets
selftests: mptcp: add missing join check
net: usb: qmi_wwan: Add support for Dell DW5829e
vlan: move dev_put into vlan_dev_uninit
vlan: introduce vlan_dev_free_egress_priority
ax25: fix UAF bugs of net_device caused by rebinding operation
net: dsa: fix panic when DSA master device unbinds on shutdown
net: amd-xgbe: disable interrupts during pci removal
tipc: rate limit warning for received illegal binding update
net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE
...
|
|
Having to acquire rtnl from netdev_run_todo() for every dismantled
device is not desirable when/if rtnl is under stress.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next
Stefan Schmidt says:
====================
pull-request: ieee802154-next 2022-02-10
An update from ieee802154 for your *net-next* tree.
There is more ongoing in ieee802154 than usual. This will be the first pull
request for this cycle, but I expect one more. Depending on review and rework
times.
Pavel Skripkin ported the atusb driver over to the new USB api to avoid unint
problems as well as making use of the modern api without kmalloc() needs in he
driver.
Miquel Raynal landed some changes to ensure proper frame checksum checking with
hwsim, documenting our use of wake and stop_queue and eliding a magic value by
using the proper define.
David Girault documented the address struct used in ieee802154.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
1) Conntrack sets on CHECKSUM_UNNECESSARY for UDP packet with no checksum,
from Kevin Mitchell.
2) skb->priority support for nfqueue, from Nicolas Dichtel.
3) Remove conntrack extension register API, from Florian Westphal.
4) Move nat destroy hook to nf_nat_hook instead, to remove
nf_ct_ext_destroy(), also from Florian.
5) Wrap pptp conntrack NAT hooks into single structure, from Florian Westphal.
6) Support for tcp option set to noop for nf_tables, also from Florian.
7) Do not run x_tables comment match from packet path in nf_tables,
from Florian Westphal.
8) Replace spinlock by cmpxchg() loop to update missed ct event,
from Florian Westphal.
9) Wrap cttimeout hooks into single structure, from Florian.
10) Add fast nft_cmp expression for up to 16-bytes.
11) Use cb->ctx to store context in ctnetlink dump, instead of using
cb->args[], from Florian Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: ctnetlink: use dump structure instead of raw args
nfqueue: enable to set skb->priority
netfilter: nft_cmp: optimize comparison for 16-bytes
netfilter: cttimeout: use option structure
netfilter: ecache: don't use nf_conn spinlock
netfilter: nft_compat: suppress comment match
netfilter: exthdr: add support for tcp option removal
netfilter: conntrack: pptp: use single option structure
netfilter: conntrack: remove extension register api
netfilter: conntrack: handle ->destroy hook via nat_ops instead
netfilter: conntrack: move extension sizes into core
netfilter: conntrack: make all extensions 8-byte alignned
netfilter: nfqueue: enable to get skb->priority
netfilter: conntrack: mark UDP zero checksum as CHECKSUM_UNNECESSARY
====================
Link: https://lore.kernel.org/r/20220209133616.165104-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-02-09
We've added 126 non-merge commits during the last 16 day(s) which contain
a total of 201 files changed, 4049 insertions(+), 2215 deletions(-).
The main changes are:
1) Add custom BPF allocator for JITs that pack multiple programs into a huge
page to reduce iTLB pressure, from Song Liu.
2) Add __user tagging support in vmlinux BTF and utilize it from BPF
verifier when generating loads, from Yonghong Song.
3) Add per-socket fast path check guarding from cgroup/BPF overhead when
used by only some sockets, from Pavel Begunkov.
4) Continued libbpf deprecation work of APIs/features and removal of their
usage from samples, selftests, libbpf & bpftool, from Andrii Nakryiko
and various others.
5) Improve BPF instruction set documentation by adding byte swap
instructions and cleaning up load/store section, from Christoph Hellwig.
6) Switch BPF preload infra to light skeleton and remove libbpf dependency
from it, from Alexei Starovoitov.
7) Fix architecture-agnostic macros in libbpf for accessing syscall
arguments from BPF progs for non-x86 architectures,
from Ilya Leoshkevich.
8) Rework port members in struct bpf_sk_lookup and struct bpf_sock to be
of 16-bit field with anonymous zero padding, from Jakub Sitnicki.
9) Add new bpf_copy_from_user_task() helper to read memory from a different
task than current. Add ability to create sleepable BPF iterator progs,
from Kenny Yu.
10) Implement XSK batching for ice's zero-copy driver used by AF_XDP and
utilize TX batching API from XSK buffer pool, from Maciej Fijalkowski.
11) Generate temporary netns names for BPF selftests to avoid naming
collisions, from Hangbin Liu.
12) Implement bpf_core_types_are_compat() with limited recursion for
in-kernel usage, from Matteo Croce.
13) Simplify pahole version detection and finally enable CONFIG_DEBUG_INFO_DWARF5
to be selected with CONFIG_DEBUG_INFO_BTF, from Nathan Chancellor.
14) Misc minor fixes to libbpf and selftests from various folks.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (126 commits)
selftests/bpf: Cover 4-byte load from remote_port in bpf_sk_lookup
bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide
libbpf: Fix compilation warning due to mismatched printf format
selftests/bpf: Test BPF_KPROBE_SYSCALL macro
libbpf: Add BPF_KPROBE_SYSCALL macro
libbpf: Fix accessing the first syscall argument on s390
libbpf: Fix accessing the first syscall argument on arm64
libbpf: Allow overriding PT_REGS_PARM1{_CORE}_SYSCALL
selftests/bpf: Skip test_bpf_syscall_macro's syscall_arg1 on arm64 and s390
libbpf: Fix accessing syscall arguments on riscv
libbpf: Fix riscv register names
libbpf: Fix accessing syscall arguments on powerpc
selftests/bpf: Use PT_REGS_SYSCALL_REGS in bpf_syscall_macro
libbpf: Add PT_REGS_SYSCALL_REGS macro
selftests/bpf: Fix an endianness issue in bpf_syscall_macro test
bpf: Fix bpf_prog_pack build HPAGE_PMD_SIZE
bpf: Fix leftover header->pages in sparc and powerpc code.
libbpf: Fix signedness bug in btf_dump_array_data()
selftests/bpf: Do not export subtest as standalone test
bpf, x86_64: Fail gracefully on bpf_jit_binary_pack_finalize failures
...
====================
Link: https://lore.kernel.org/r/20220209210050.8425-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the commit c504e5c2f964 ("net: skb: introduce kfree_skb_reason()")
drop reason is introduced to the tracepoint of kfree_skb. Therefore,
drop_monitor is able to report the drop reason to users by netlink.
The drop reasons are reported as string to users, which is exactly
the same as what we do when reporting it to ftrace.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220209060838.55513-1-imagedong@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
remote_port is another case of a BPF context field documented as a 32-bit
value in network byte order for which the BPF context access converter
generates a load of a zero-padded 16-bit integer in network byte order.
First such case was dst_port in bpf_sock which got addressed in commit
4421a582718a ("bpf: Make dst_port field in struct bpf_sock 16-bit wide").
Loading 4-bytes from the remote_port offset and converting the value with
bpf_ntohl() leads to surprising results, as the expected value is shifted
by 16 bits.
Reduce the confusion by splitting the field in two - a 16-bit field holding
a big-endian integer, and a 16-bit zero-padding anonymous field that
follows it.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220209184333.654927-2-jakub@cloudflare.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull more nfsd fixes from Chuck Lever:
"Ensure that NFS clients cannot send file size or offset values that
can cause the NFS server to crash or to return incorrect or surprising
results.
In particular, fix how the NFS server handles values larger than
OFFSET_MAX"
* tag 'nfsd-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Deprecate NFS_OFFSET_MAX
NFSD: Fix offset type in I/O trace points
NFSD: COMMIT operations must not return NFS?ERR_INVAL
NFSD: Clamp WRITE offsets
NFSD: Fix NFSv3 SETATTR/CREATE's handling of large file sizes
NFSD: Fix ia_size underflow
NFSD: Fix the behavior of READ near OFFSET_MAX
|
|
NFS_OFFSET_MAX was introduced way back in Linux v2.3.y before there
was a kernel-wide OFFSET_MAX value. As a clean up, replace the last
few uses of it with its generic equivalent, and get rid of it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The value returned by an spi driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Claudius Heine <ch@denx.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This change adds a couple of new ioctls for mctp sockets:
SIOCMCTPALLOCTAG and SIOCMCTPDROPTAG. These ioctls provide facilities
for explicit allocation / release of tags, overriding the automatic
allocate-on-send/release-on-reply and timeout behaviours. This allows
userspace more control over messages that may not fit a simple
request/response model.
In order to indicate a pre-allocated tag to the sendmsg() syscall, we
introduce a new flag to the struct sockaddr_mctp.smctp_tag value:
MCTP_TAG_PREALLOC.
Additional changes from Jeremy Kerr <jk@codeconstruct.com.au>.
Contains a fix that was:
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
