summaryrefslogtreecommitdiff
path: root/include/uapi
AgeCommit message (Collapse)Author
2023-06-22can: uapi: move CAN_RAW_FILTER_MAX definition to raw.hOliver Hartkopp
CAN_RAW_FILTER_MAX is only relevant for CAN_RAW sockets and used in linux/can/raw.c or in userspace applications that include the raw.h file anyway. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230609121051.9631-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-21mptcp: introduce MPTCP_FULL_INFO getsockoptPaolo Abeni
Some user-space applications want to monitor the subflows utilization. Dumping the per subflow tcp_info is not enough, as the PM could close and re-create the subflows under-the-hood, fooling the accounting. Even checking the src/dst addresses used by each subflow could not be enough, because new subflows could re-use the same address/port of the just closed one. This patch introduces a new socket option, allow dumping all the relevant information all-at-once (everything, everywhere...), in a consistent manner. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/388 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21mptcp: track some aggregate data countersPaolo Abeni
Currently there are no data transfer counters accounting for all the subflows used by a given MPTCP socket. The user-space can compute such figures aggregating the subflow info, but that is inaccurate if any subflow is closed before the MPTCP socket itself. Add the new counters in the MPTCP socket itself and expose them via the existing diag and sockopt. While touching mptcp_diag_fill_info(), acquire the relevant locks before fetching the msk data, to ensure better data consistency Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/385 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21RDMA/bnxt_re: Enable low latency pushSelvin Xavier
Introduce driver specific uapi functionalites. Added a alloc_page functionality for user library to allocate specific pages. Currently added support for allocating write combine pages for push functinality. This interface shall be extended for other page allocations. Allocate a WC page using the uapi hook for enabling the low latency push in Gen P5 adapters for small packets. This is supported only for the user space QPs. Link: https://lore.kernel.org/r/1686679943-17117-8-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-06-21wifi: nl80211/reg: add no-EHT regulatory flagJohannes Berg
This just propagates to the channel flags, like no-HE and similar other flags before it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230619161906.74ce2983aed8.Ifa343ba89c11760491daad5aee5a81209d5735a7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-20block: change all __u32 annotations to __be32 in affs_hardblocks.hMichael Schmitz
The Amiga partition parser module uses signed int for partition sector address and count, which will overflow for disks larger than 1 TB. Use u64 as type for sector address and size to allow using disks up to 2 TB without LBD support, and disks larger than 2 TB with LBD. The RBD format allows to specify disk sizes up to 2^128 bytes (though native OS limitations reduce this somewhat, to max 2^68 bytes), so check for u64 overflow carefully to protect against overflowing sector_t. This bug was reported originally in 2012, and the fix was created by the RDB author, Joanne Dow <jdow@earthlink.net>. A patch had been discussed and reviewed on linux-m68k at that time but never officially submitted (now resubmitted as patch 1 of this series). Patch 3 (this series) adds additional error checking and warning messages. One of the error checks now makes use of the previously unused rdb_CylBlocks field, which causes a 'sparse' warning (cast to restricted __be32). Annotate all 32 bit fields in affs_hardblocks.h as __be32, as the on-disk format of RDB and partition blocks is always big endian. Reported-by: Martin Steigerwald <Martin@lichtvoll.de> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=43511 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Message-ID: <201206192146.09327.Martin@lichtvoll.de> Cc: <stable@vger.kernel.org> # 5.2 Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20230620201725.7020-3-schmitzmic@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-20ptp: Add .getmaxphase callback to ptp_clock_infoRahul Rameshbabu
Enables advertisement of the maximum offset supported by the phase control functionality of PHCs. The callback is used to return an error if an offset not supported by the PHC is used in ADJ_OFFSET. The ioctls PTP_CLOCK_GETCAPS and PTP_CLOCK_GETCAPS2 now advertise the maximum offset a PHC's phase control functionality is capable of supporting. Introduce new sysfs node, max_phase_adjustment. Cc: Jakub Kicinski <kuba@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-19wifi: cfg80211/nl80211: Add support to indicate STA MLD setup links removalVeerendranath Jakkam
STA MLD setup links may get removed if AP MLD remove the corresponding affiliated APs with Multi-Link reconfiguration as described in P802.11be_D3.0, section 35.3.6.2.2 Removing affiliated APs. Currently, there is no support to notify such operation to cfg80211 and userspace. Add support for the drivers to indicate STA MLD setup links removal to cfg80211 and notify the same to userspace. Upon receiving such indication from the driver, clear the MLO links information of the removed links in the WDEV. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230317142153.237900-1-quic_vjakkam@quicinc.com [rename function and attribute, fix kernel-doc] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19powerpc/ptrace: Expose HASHKEYR register to ptraceBenjamin Gray
The HASHKEYR register contains a secret per-process key to enable unique hashes per process. In general it should not be exposed to userspace at all and a regular process has no need to know its key. However, checkpoint restore in userspace (CRIU) functionality requires that a process be able to set the HASHKEYR of another process, otherwise existing hashes on the stack would be invalidated by a new random key. Exposing HASHKEYR in this way also makes it appear in core dumps, which is a security concern. Multiple threads may share a key, for example just after a fork() call, where the kernel cannot know if the child is going to return back along the parent's stack. If such a thread is coerced into making a core dump, then the HASHKEYR value will be readable and able to be used against all other threads sharing that key, effectively undoing any protection offered by hashst/hashchk. Therefore we expose HASHKEYR to ptrace when CONFIG_CHECKPOINT_RESTORE is enabled, providing a choice of increased security or migratable ROP protected processes. This is similar to how ARM exposes its PAC keys. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Reviewed-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230616034846.311705-8-bgray@linux.ibm.com
2023-06-19powerpc/ptrace: Expose DEXCR and HDEXCR registers to ptraceBenjamin Gray
The DEXCR register is of interest when ptracing processes. Currently it is static, but eventually will be dynamically controllable by a process. If a process can control its own, then it is useful for it to be ptrace-able to (e.g., for checkpoint-restore functionality). It is also relevant to core dumps (the NPHIE aspect in particular), which use the ptrace mechanism (or is it the other way around?) to decide what to dump. The HDEXCR is useful here too, as the NPHIE aspect may be set in the HDEXCR without being set in the DEXCR. Although the HDEXCR is per-cpu and we don't track it in the task struct (it's useless in normal operation), it would be difficult to imagine why a hypervisor would set it to different values within a guest. A hypervisor cannot safely set NPHIE differently at least, as that would break programs. Expose a read-only view of the userspace DEXCR and HDEXCR to ptrace. The HDEXCR is always readonly, and is useful for diagnosing the core dumps (as the HDEXCR may set NPHIE without the DEXCR setting it). Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Reviewed-by: Russell Currey <ruscur@russell.cc> [mpe: Use lower_32_bits() rather than open coding] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230616034846.311705-7-bgray@linux.ibm.com
2023-06-19Backmerge tag 'v6.4-rc7' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Linux 6.4-rc7 Need this to pull in the msm work. Signed-off-by: Dave Airlie <airlied@redhat.com>
2023-06-18RISC-V: KVM: Implement device interface for AIA irqchipAnup Patel
We implement KVM device interface for in-kernel AIA irqchip so that user-space can use KVM device ioctls to create, configure, and destroy in-kernel AIA irqchip. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2023-06-16vfio/cdx: add support for CDX busNipun Gupta
vfio-cdx driver enables IOCTLs for user space to query MMIO regions for CDX devices and mmap them. This change also adds support for reset of CDX devices. With VFIO enabled on CDX devices, user-space applications can also exercise DMA securely via IOMMU on these devices. This change adds the VFIO CDX driver and enables the following ioctls for CDX devices: - VFIO_DEVICE_GET_INFO: - VFIO_DEVICE_GET_REGION_INFO - VFIO_DEVICE_RESET Signed-off-by: Nipun Gupta <nipun.gupta@amd.com> Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com> Link: https://lore.kernel.org/r/20230531124557.11009-1-nipun.gupta@amd.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-06-16vfio/pci-core: Add capability for AtomicOp completer supportAlex Williamson
Test and enable PCIe AtomicOp completer support of various widths and report via device-info capability to userspace. Reviewed-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Robin Voetter <robin@streamhpc.com> Tested-by: Robin Voetter <robin@streamhpc.com> Link: https://lore.kernel.org/r/20230519214748.402003-1-alex.williamson@redhat.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-06-16scsi: block: Improve ioprio value validity checksDamien Le Moal
The introduction of the macro IOPRIO_PRIO_LEVEL() in commit eca2040972b4 ("scsi: block: ioprio: Clean up interface definition") results in an iopriority level to always be masked using the macro IOPRIO_LEVEL_MASK, and thus to the kernel always seeing an acceptable value for an I/O priority level when checked in ioprio_check_cap(). Before this patch, this function would return an error for some (but not all) invalid values for a level valid range of [0..7]. Restore and improve the detection of invalid priority levels by introducing the inline function ioprio_value() to check an ioprio class, level and hint value before combining these fields into a single value to be used with ioprio_set() or AIOs. If an invalid value for the class, level or hint of an ioprio is detected, ioprio_value() returns an ioprio using the class IOPRIO_CLASS_INVALID, indicating an invalid value and causing ioprio_check_cap() to return -EINVAL. Fixes: 6c913257226a ("scsi: block: Introduce ioprio hints") Fixes: eca2040972b4 ("scsi: block: ioprio: Clean up interface definition") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20230608095556.124001-1-dlemoal@kernel.org Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: include/linux/mlx5/driver.h 617f5db1a626 ("RDMA/mlx5: Fix affinity assignment") dc13180824b7 ("net/mlx5: Enable devlink port for embedded cpu VF vports") https://lore.kernel.org/all/20230613125939.595e50b8@canb.auug.org.au/ tools/testing/selftests/net/mptcp/mptcp_join.sh 47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported") 425ba803124b ("selftests: mptcp: join: support RM_ADDR for used endpoints or not") 45b1a1227a7a ("mptcp: introduces more address related mibs") 0639fa230a21 ("selftests: mptcp: add explicit check for new mibs") https://lore.kernel.org/netdev/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-15drm/amdkfd: bump kfd ioctl minor version for event age availabilityJames Zhu
Bump the minor version to declare event age tracking feature is now available. In kernel amdgpu driver, kfd_wait_on_events is used to support user space signal event wait function. For multiple threads waiting on same event scenery, race condition could occur since some threads after checking signal condition, before calling kfd_wait_on_events, the event interrupt could be fired and wake up other thread which are sleeping on this event. Then those threads could fall into sleep without waking up again. Adding event age tracking in both kernel and user mode, will help avoiding this race condition. Proposed ROCT-Thunk-Interface: https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/commit/efdbf6cfbc026bd68ac3c35d00dacf84370eb81e https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/commit/1820ae0a2db85b6f584611dc0cde1a00e7c22915 Proposed ROCR-Runtime: https://github.com/RadeonOpenCompute/ROCR-Runtime/compare/master...zhums:ROCR-Runtime:new_event_wait_review https://github.com/RadeonOpenCompute/ROCR-Runtime/commit/e1f5bdb88eb882ac798aeca2c00ea3fbb2dba459 https://github.com/RadeonOpenCompute/ROCR-Runtime/commit/7d26afd14107b5c2a754c1a3f415d89f3aabb503 Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amdkfd: add event age trackingJames Zhu
Add event age tracking Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15Merge branch kvm-arm64/eager-page-splitting into kvmarm/nextOliver Upton
* kvm-arm64/eager-page-splitting: : Eager Page Splitting, courtesy of Ricardo Koller. : : Dirty logging performance is dominated by the cost of splitting : hugepages to PTE granularity. On systems that mere mortals can get their : hands on, each fault incurs the cost of a full break-before-make : pattern, wherein the broadcast invalidation and ensuing serialization : significantly increases fault latency. : : The goal of eager page splitting is to move the cost of hugepage : splitting out of the stage-2 fault path and instead into the ioctls : responsible for managing the dirty log: : : - If manual protection is enabled for the VM, hugepage splitting : happens in the KVM_CLEAR_DIRTY_LOG ioctl. This is desirable as it : provides userspace granular control over hugepage splitting. : : - Otherwise, if userspace relies on the legacy dirty log behavior : (clear on collection), hugepage splitting is done at the moment dirty : logging is enabled for a particular memslot. : : Support for eager page splitting requires explicit opt-in from : userspace, which is realized through the : KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE capability. arm64: kvm: avoid overflow in integer division KVM: arm64: Use local TLBI on permission relaxation KVM: arm64: Split huge pages during KVM_CLEAR_DIRTY_LOG KVM: arm64: Open-code kvm_mmu_write_protect_pt_masked() KVM: arm64: Split huge pages when dirty logging is enabled KVM: arm64: Add kvm_uninit_stage2_mmu() KVM: arm64: Refactor kvm_arch_commit_memory_region() KVM: arm64: Add kvm_pgtable_stage2_split() KVM: arm64: Add KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE KVM: arm64: Export kvm_are_all_memslots_empty() KVM: arm64: Add helper for creating unlinked stage2 subtrees KVM: arm64: Add KVM_PGTABLE_WALK flags for skipping CMOs and BBM TLBIs KVM: arm64: Rename free_removed to free_unlinked Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-06-15eventfd: add a uapi header for eventfd userspace APIsWen Yang
Create a uapi header include/uapi/linux/eventfd.h, move the associated flags to the uapi header, and include it from linux/eventfd.h. Suggested-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Wen Yang <wenyang.linux@foxmail.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dylan Yudaken <dylany@fb.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Eric Biggers <ebiggers@google.com> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Message-Id: <tencent_2B6A999A23E86E522D5D9859D54FFCF9AA05@qq.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-06-15misc: tps6594-pfsm: Add driver for TI TPS6594 PFSMJulien Panis
This PFSM controls the operational modes of the PMIC: - STANDBY and LP_STANDBY, - ACTIVE state, - MCU_ONLY state, - RETENTION state, with or without DDR and/or GPIO retention. Depending on the current operational mode, some voltage domains remain energized while others can be off. This PFSM is also used to trigger a firmware update, and provides R/W access to device registers. See Documentation/misc-devices/tps6594-pfsm.rst for more information. Signed-off-by: Julien Panis <jpanis@baylibre.com> Message-ID: <20230511095126.105104-5-jpanis@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-15Merge tag 'counter-updates-for-6.5a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next William writes: First set of Counter updates for the 6.5 cycle Biggest changes in this set include the introduction of a new Intel 8254 interface library module and the refactoring of the existing 104-quad-8 modules to migrate it to the regmap API. Some other minor cleanups touching tools/counter and stm32-timer-cnt are also present. Changes * 104-quad-8 - Remove reference in Kconfig to 25-bit counter value - Utilize bitfield access macros - Refactor to buffer states for CMR, IOR, and IDR - Utilize helper functions to handle PR, FLAG and PSC - Migrate to the regmap API * i8254 - Introduce the Intel 8254 interface library module * stm32-timer-cnt - Reset TIM_TISEL to its default value in probe * tools/counter - Add .gitignore - Remove lingering 'include' directories on make clean * tag 'counter-updates-for-6.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter: counter: i8254: Introduce the Intel 8254 interface library module counter: 104-quad-8: Migrate to the regmap API counter: 104-quad-8: Utilize helper functions to handle PR, FLAG and PSC counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR counter: 104-quad-8: Utilize bitfield access macros tools/counter: Makefile: Remove lingering 'include' directories on make clean tools/counter: Add .gitignore counter: stm32-timer-cnt: Reset TIM_TISEL to its default value in probe counter: 104-quad-8: Remove reference in Kconfig to 25-bit counter value
2023-06-15usb: ch9: Replace 1-element array with flexible arrayKees Cook
Since commit df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3"), UBSAN_BOUNDS no longer pretends 1-element arrays are unbounded. Walking wData will trigger a warning, so make it a proper flexible array. Add a union to keep the struct size identical for userspace in case anything was depending on the old size. Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202306102333.8f5a7443-oliver.sang@intel.com Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: kernel test robot <lkp@intel.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "Jó Ágila Bitsch" <jgilab@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Message-ID: <20230614181307.gonna.256-kees@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-15Merge tag 'amd-drm-next-6.5-2023-06-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.5-2023-06-02: amdgpu: - SR-IOV fixes - Warning fixes - Misc code cleanups and spelling fixes - DCN 3.2 updates - Improved DC FAMS support for better power management - Improved DC SubVP support for better power management - DCN 3.1.x fixes - Max IB size query - DC GPU reset fixes - RAS updates - DCN 3.0.x fixes - S/G display fixes - CP shadow buffer support - Implement connector force callback - Z8 power improvements - PSP 13.0.10 vbflash support - Mode2 reset fixes - Store MQDs in VRAM to improve queue switch latency - VCN 3.x fixes - JPEG 3.x fixes - Enable DC_FP on LoongArch - GFXOFF fixes - GC 9.4.3 partition support - SDMA 4.4.2 partition support - VCN/JPEG 4.0.3 partition support - VCN 4.0.3 updates - NBIO 7.9 updates - GC 9.4.3 updates - Take NUMA into account when allocating memory - Handle NUMA for partitions - SMU 13.0.6 updates - GC 9.4.3 RAS updates - Stop including unused swiotlb.h - SMU 13.0.7 fixes - Fix clock output ordering on some APUs - Clean up DC FPGA code - GFX9 preemption fixes - Misc irq fixes - S0ix fixes - Add new DRM_AMDGPU_WERROR config parameter to help with CI - PCIe fix for RDNA2 - kdoc fixes - Documentation updates amdkfd: - Query TTM mem limit rather than hardcoding it - GC 9.4.3 partition support - Handle NUMA for partitions radeon: - Fix possible double free - Stop including unused swiotlb.h - Fix possible division by zero ttm: - Add query for TTM mem limit - Add NUMA awareness to pools - Export ttm_pool_fini() UAPI: - Add new ctx query flag to better handle GPU resets Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22290 - Add new interface to query and set shadow buffer for RDNA3 Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21986 - Add new INFO query for max IB size Proposed userspace: https://gitlab.freedesktop.org/bnieuwenhuizen/mesa/-/commits/ib-rejection-v3 amd-drm-next-6.5-2023-06-09: amdgpu: - S0ix fixes - Initial SMU13 Overdrive support - kdoc fixes - Misc clode cleanups - Flexible array fixes - Display OTG fixes - SMU 13.0.6 updates - Revert some broken clock counter updates - Misc display fixes - GFX9 preemption fixes - Add support for newer EEPROM bad page table format - Add missing radeon secondary id - Add support for new colorspace KMS API - CSA fix - Stable pstate fixes for APUs - make vbl interface admin only - Handle PCI accelerator class amdkfd: - Add debugger support for gdb radeon: - Fix possible UAF drm: - Add Colorspace functionality UAPI: - Add debugger interface for enabling gdb Proposed userspace: https://github.com/ROCm-Developer-Tools/ROCdbgapi/tree/wip-dbgapi - Add KMS colorspace API Discussion: https://lists.freedesktop.org/archives/dri-devel/2023-June/408128.html From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230609174817.7764-1-alexander.deucher@amd.com
2023-06-14wifi: cfg80211: Support association to AP MLD with disabled linksIlan Peer
An AP part of an AP MLD might be temporarily disabled, and might be enabled later. Such a link should be included in the association exchange, but should not be used until enabled. Extend the NL80211_CMD_ASSOCIATE to also indicate disabled links. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230608163202.c4c61ee4c4a5.I784ef4a0d619fc9120514b5615458fbef3b3684a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-14wifi: cfg80211: S1G rate information and calculationsGilad Itzkovitch
Increase the size of S1G rate_info flags to support S1G and add flags for new S1G MCS and the supported bandwidths. Also, include S1G rate information to netlink STA rate message. Lastly, add rate calculation function for S1G MCS. Signed-off-by: Gilad Itzkovitch <gilad.itzkovitch@morsemicro.com> Link: https://lore.kernel.org/r/20230518000723.991912-1-gilad.itzkovitch@morsemicro.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-13Merge branch 'topic/midi20' into for-nextTakashi Iwai
As the updated MIDI 2.0 spec has been published freshly, this is a catch up to add the support for new specs, especially UMP v1.1 features, on Linux kernel. The new UMP v1.1 introduced the concept of Function Blocks (FB), which is a kind of superset of USB MIDI 2.0 Group Terminal Blocks (GTB). The patch set adds the support for FB as the primary information source while keeping the parse of GTB as fallback. Also UMP v1.1 supports the groupless messages, the protocol switch, static FBs, and other new fundamental features, and those are supported as well. Link: https://www.midi.org/midi-articles/details-about-midi-2-0-midi-ci-profiles-and-property-exchange Link: https://lore.kernel.org/r/20230612081054.17200-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-06-12net: flower: add support for matching cfm fieldsZahari Doychev
Add support to the tc flower classifier to match based on fields in CFM information elements like level and opcode. tc filter add dev ens6 ingress protocol 802.1q \ flower vlan_id 698 vlan_ethtype 0x8902 cfm mdl 5 op 46 \ action drop Signed-off-by: Zahari Doychev <zdoychev@maxlinear.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12ALSA: ump: Add info flag bit for static blocksTakashi Iwai
UMP v1.1 spec allows to inform whether the function blocks are static and not dynamically updated. Add a new flag bit to snd_ump_endpoint_info to reflect that attribute, too. The flag is set when a USB MIDI device is still in the old MIDI 2.0 without UMP 1.1 support. Then the driver falls back to GTBs, and they are supposed to be static-only. Link: https://lore.kernel.org/r/20230612081054.17200-10-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-06-12ALSA: seq: ump: Handle groupless messagesTakashi Iwai
The UMP Utility and Stream messages are "groupless", i.e. an incoming groupless packet should be sent only to the UMP EP port, and the event with the groupless message is sent to UMP EP as is without the group translation per port. Also, the former reserved bit 0 for the client group filter is now used for groupless events. When the bit 0 is set, the groupless events are filtered out and skipped. Link: https://lore.kernel.org/r/20230612081054.17200-6-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-06-12ALSA: ump: Add more attributes to UMP EP and FB infoTakashi Iwai
Add a few more fields to snd_ump_endpoint_info and snd_ump_block_info that are added in the new v1.1 spec. Those are filled by the UMP Stream messages. The rawmidi protocol version is bumped to 2.0.4 to indicate those updates. Also, update the proc outputs to show the newly introduced fields. Link: https://lore.kernel.org/r/20230612081054.17200-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-06-12net: core: add getsockopt SO_PEERPIDFDAlexander Mikhalitsyn
Add SO_PEERPIDFD which allows to get pidfd of peer socket holder pidfd. This thing is direct analog of SO_PEERCRED which allows to get plain PID. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: David Ahern <dsahern@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Kees Cook <keescook@chromium.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Cc: Lennart Poettering <mzxreary@0pointer.de> Cc: Luca Boccassi <bluca@debian.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Stanislav Fomichev <sdf@google.com> Cc: bpf@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-arch@vger.kernel.org Reviewed-by: Christian Brauner <brauner@kernel.org> Acked-by: Stanislav Fomichev <sdf@google.com> Tested-by: Luca Boccassi <bluca@debian.org> Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-12scm: add SO_PASSPIDFD and SCM_PIDFDAlexander Mikhalitsyn
Implement SCM_PIDFD, a new type of CMSG type analogical to SCM_CREDENTIALS, but it contains pidfd instead of plain pid, which allows programmers not to care about PID reuse problem. We mask SO_PASSPIDFD feature if CONFIG_UNIX is not builtin because it depends on a pidfd_prepare() API which is not exported to the kernel modules. Idea comes from UAPI kernel group: https://uapi-group.org/kernel-features/ Big thanks to Christian Brauner and Lennart Poettering for productive discussions about this. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: David Ahern <dsahern@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Kees Cook <keescook@chromium.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Cc: Lennart Poettering <mzxreary@0pointer.de> Cc: Luca Boccassi <bluca@debian.org> Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-arch@vger.kernel.org Tested-by: Luca Boccassi <bluca@debian.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-12net: openvswitch: add support for l4 symmetric hashingAaron Conole
Since its introduction, the ovs module execute_hash action allowed hash algorithms other than the skb->l4_hash to be used. However, additional hash algorithms were not implemented. This means flows requiring different hash distributions weren't able to use the kernel datapath. Now, introduce support for symmetric hashing algorithm as an alternative hash supported by the ovs module using the flow dissector. Output of flow using l4_sym hash: recirc_id(0),in_port(3),eth(),eth_type(0x0800), ipv4(dst=64.0.0.0/192.0.0.0,proto=6,frag=no), packets:30473425, bytes:45902883702, used:0.000s, flags:SP., actions:hash(sym_l4(0)),recirc(0xd) Some performance testing with no GRO/GSO, two veths, single flow: hash(l4(0)): 4.35 GBits/s hash(l4_sym(0)): 4.24 GBits/s Signed-off-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-12net: ethtool: correct MAX attribute value for statsJakub Kicinski
When compiling YNL generated code compiler complains about array-initializer-out-of-bounds. Turns out the MAX value for STATS_GRP uses the value for STATS. This may lead to random corruptions in user space (kernel itself doesn't use this value as it never parses stats). Fixes: f09ea6fb1272 ("ethtool: add a new command for reading standard stats") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-09cachestat: implement cachestat syscallNhat Pham
There is currently no good way to query the page cache state of large file sets and directory trees. There is mincore(), but it scales poorly: the kernel writes out a lot of bitmap data that userspace has to aggregate, when the user really doesn not care about per-page information in that case. The user also needs to mmap and unmap each file as it goes along, which can be quite slow as well. Some use cases where this information could come in handy: * Allowing database to decide whether to perform an index scan or direct table queries based on the in-memory cache state of the index. * Visibility into the writeback algorithm, for performance issues diagnostic. * Workload-aware writeback pacing: estimating IO fulfilled by page cache (and IO to be done) within a range of a file, allowing for more frequent syncing when and where there is IO capacity, and batching when there is not. * Computing memory usage of large files/directory trees, analogous to the du tool for disk usage. More information about these use cases could be found in the following thread: https://lore.kernel.org/lkml/20230315170934.GA97793@cmpxchg.org/ This patch implements a new syscall that queries cache state of a file and summarizes the number of cached pages, number of dirty pages, number of pages marked for writeback, number of (recently) evicted pages, etc. in a given range. Currently, the syscall is only wired in for x86 architecture. NAME cachestat - query the page cache statistics of a file. SYNOPSIS #include <sys/mman.h> struct cachestat_range { __u64 off; __u64 len; }; struct cachestat { __u64 nr_cache; __u64 nr_dirty; __u64 nr_writeback; __u64 nr_evicted; __u64 nr_recently_evicted; }; int cachestat(unsigned int fd, struct cachestat_range *cstat_range, struct cachestat *cstat, unsigned int flags); DESCRIPTION cachestat() queries the number of cached pages, number of dirty pages, number of pages marked for writeback, number of evicted pages, number of recently evicted pages, in the bytes range given by `off` and `len`. An evicted page is a page that is previously in the page cache but has been evicted since. A page is recently evicted if its last eviction was recent enough that its reentry to the cache would indicate that it is actively being used by the system, and that there is memory pressure on the system. These values are returned in a cachestat struct, whose address is given by the `cstat` argument. The `off` and `len` arguments must be non-negative integers. If `len` > 0, the queried range is [`off`, `off` + `len`]. If `len` == 0, we will query in the range from `off` to the end of the file. The `flags` argument is unused for now, but is included for future extensibility. User should pass 0 (i.e no flag specified). Currently, hugetlbfs is not supported. Because the status of a page can change after cachestat() checks it but before it returns to the application, the returned values may contain stale information. RETURN VALUE On success, cachestat returns 0. On error, -1 is returned, and errno is set to indicate the error. ERRORS EFAULT cstat or cstat_args points to an invalid address. EINVAL invalid flags. EBADF invalid file descriptor. EOPNOTSUPP file descriptor is of a hugetlbfs file [nphamcs@gmail.com: replace rounddown logic with the existing helper] Link: https://lkml.kernel.org/r/20230504022044.3675469-1-nphamcs@gmail.com Link: https://lkml.kernel.org/r/20230503013608.2431726-3-nphamcs@gmail.com Signed-off-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Brian Foster <bfoster@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09drm/amdkfd: bump kfd ioctl minor version for debug api availabilityJonathan Kim
Bump the minor version to declare debugging capability is now available. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdkfd: display debug capabilitiesJonathan Kim
Expose debug capabilities in the KFD topology node's HSA capabilities and debug properties flags. Ensure correct capabilities are exposed based on firmware support. Flag definitions can be referenced in uapi/linux/kfd_sysfs.h. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdkfd: add debug and runtime enable interfaceJonathan Kim
Introduce the GPU debug operations interface. For ROCm-GDB to extend the GNU Debugger's ability to inspect the AMD GPU instruction set, provide the necessary interface to allow the debugger to HW debug-mode set and query exceptions per HSA queue, process or device. The runtime_enable interface coordinates exception handling with the HSA runtime. Usage is available in the kern docs at uapi/linux/kfd_ioctl.h. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09amd/amdkfd: drop unused KFD_IOCTL_SVM_FLAG_UNCACHED flagAlex Deucher
Was leftover from GC 9.4.3 bring up and is currently unused. Drop it for now. Cc: Philip.Yang@amd.com Cc: rajneesh.bhardwaj@amd.com Cc: Felix.Kuehling@amd.com Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09media: Add NV15_4L4 pixel formatBenjamin Gaignard
NV15_4L4 is the 10-bits per component 4x4 tiled format. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: Add AV1 uAPIDaniel Almeida
This patch adds the AOMedia Video 1 (AV1) kernel uAPI. This design is based on currently available AV1 API implementations and aims to support the development of AV1 stateless video codecs on Linux. Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com> Co-developed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09drm/amdkfd: Update coherence settings for svm rangesRajneesh Bhardwaj
Recently introduced commit "drm/amdgpu: Set cache coherency for GC 9.4.3" did not update the settings applicable for svm ranges. Add the coherence settings for svm ranges for GFX IP 9.4.3. Reviewed-by: Amber Lin <amber.lin@amd.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: add new flag to AMDGPU_CTX_QUERY2Pierre-Eric Pelloux-Prayer
OpenGL EXT_robustness extension expects the driver to stop reporting GUILTY_CONTEXT_RESET when the reset has completed and the GPU is ready to accept submission again. This commit adds a AMDGPU_CTX_QUERY2_FLAGS_RESET_IN_PROGRESS flag, that let the UMD know that the reset is still not finished. Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22290 Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: André Almeida <andrealmeid@igalia.com> Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09Merge tag 'v6.4-rc5' into media_stageMauro Carvalho Chehab
Linux 6.4-rc5 * tag 'v6.4-rc5': (919 commits) Linux 6.4-rc5 leds: qcom-lpg: Fix PWM period limits selftests/ftrace: Choose target function for filter test from samples KVM: selftests: Add test for race in kvm_recalculate_apic_map() KVM: x86: Bail from kvm_recalculate_phys_map() if x2APIC ID is out-of-bounds KVM: x86: Account fastpath-only VM-Exits in vCPU stats KVM: SVM: vNMI pending bit is V_NMI_PENDING_MASK not V_NMI_BLOCKING_MASK KVM: x86/mmu: Grab memslot for correct address space in NX recovery worker tpm, tpm_tis: correct tpm_tis_flags enumeration values Revert "ext4: remove ac->ac_found > sbi->s_mb_min_to_scan dead check in ext4_mb_check_limits" media: uvcvideo: Don't expose unsupported formats to userspace media: v4l2-subdev: Fix missing kerneldoc for client_caps media: staging: media: imx: initialize hs_settle to avoid warning media: v4l2-mc: Drop subdev check in v4l2_create_fwnode_links_to_pad() riscv: Implement missing huge_ptep_get riscv: Fix huge_ptep_set_wrprotect when PTE is a NAPOT module/decompress: Fix error checking on zstd decompression fork, vhost: Use CLONE_THREAD to fix freezer/ps regression dt-bindings: serial: 8250_omap: add rs485-rts-active-high selinux: don't use make's grouped targets feature yet ...
2023-06-09Merge tag 'drm-intel-gt-next-2023-06-08' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake. Driver Changes: Fixes/improvements/new stuff: - Use large rings for compute contexts (Chris Wilson) - Better logging/debug of unexpected GuC communication issues (Michal Wajdeczko) - Clear out entire reports after reading if not power of 2 size (Ashutosh Dixit) - Limit lmem allocation size to succeed on SmallBars (Andrzej Hajda) - perf/OA capture robustness improvements on DG2 (Umesh Nerlige Ramappa) - Fix error code in intel_gsc_uc_heci_cmd_submit_nonpriv() (Dan Carpenter) Future platform enablement: - Add workaround 14016712196 (Tejas Upadhyay) - HuC loading for MTL (Daniele Ceraolo Spurio) - Allow user to set cache at BO creation (Fei Yang) Miscellaneous: - Use system include style for drm headers (Jani Nikula) - Drop legacy CTB definitions (Michal Wajdeczko) - Turn off the timer to sample frequencies when GT is parked (Ashutosh Dixit) - Make PMU sample array two-dimensional (Ashutosh Dixit) - Use the correct error value when kernel_context() fails (Andi Shyti) - Fix second parameter type of pre-gen8 pte_encode callbacks (Nathan Chancellor) - Fix parameter in gmch_ggtt_insert_{entries, page}() (Nathan Chancellor) - Fix size_t format specifier in gsccs_send_message() (Nathan Chancellor) - Use the fdinfo helper (Tvrtko Ursulin) - Add some missing error propagation (Tvrtko Ursulin) - Reduce I915_MAX_GT to 2 (Matt Atwood) - Rename I915_PMU_MAX_GTS to I915_PMU_MAX_GT (Matt Atwood) - Remove some obsolete definitions (John Harrison) Merges: - Merge drm/drm-next into drm-intel-gt-next (Tvrtko Ursulin) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZIH09fqe5v5yArsu@tursulin-desk
2023-06-09Merge tag 'drm-intel-next-2023-06-05' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 features for v6.5: Features and functionality: - Meteorlake (MTL) display enabling (Mika, Radhakrishna, José, Ankit, Clint, Gustavo, Imre, Anusha, Juha-Pekka, Matt) - Allow VRR to be toggled during fastsets (Ville) - Allow arbitrary refresh rates with VRR eDP panels (Ville) - Support async flips on linear buffers on display ver 12+ (Arun) - New debugfs for display clock frequencies (Bhanuprakash) - Taint kernel when force probing unsupported devices (Jani) - Expose CRTC CTM property on ILK/SNB/VLV (Ville) DRM subsystem changes: - EDID changes to support further conversion to struct drm_edid (Jani) - Move i915 DSC parameter code to common DRM helpers (Dmitry Baryshkov) Refactoring and cleanups: - CSC color refactoring (Ville) - VRR cleanups (Ville) - Finish i915 conversion to struct drm_edid (Jani) - Start high level display driver file (Jani) - Hotplug refactoring (Ville) - Misc display refactoring and cleanups (Jani, Ville) - Use device based logging for state checker warnings (Jani) - Split out hotplug and display irq handling (Jani) - Move display device info and probe under display/ (Matt) - HDCP cleanups (Suraj) - Use localized warning ignores instead of per file (Jani) - Remove superfluous enum i915_drm_suspend_mode (Maarten) - PSR, pfit, scaler and chicken register definition cleanups (Ville) - Constify pointers to hwmon_channel_info (Krzysztof Kozlowski) - Replace all non-returning strlcpy with strscpy (Azeem Shaikh) - Refactor VBT aux channel and DDC pin mapping (Ville) - Include cleanups (Jani) Fixes: - Fix modeset locking issue in DP MST HDCP (Suraj) - Fix disconnected Type-C/DP-alt disable at probe (Imre) - Fix HDMI PCON DSC usage and color conversions (Ankit) - Fix g4x HDMI infoframe/audio transmission port usage (Ville) - Avoid use-after-free when DP connector init fails (Maarten) - Fix voltage level for 480 MHz CDCLK (Chaitanya) - Check HPD live state during eDP probe (Ville) - Fix active port PLL selection for secondary MST streams (Imre) - Check pipe source size when using SKL+ scalers (Ville) - Fix MIPI DSI sleep sequences (Hans de Goede) - Fix DPCD register write order to match 128b/132b requirement (Arun) - Increase AUX timeout for Type-C (Suraj) - Communicate display power demands to pcode (Stan) - Fix potential division by zero in DSC compute config (Nikita Zhandarovich) - Fix fast wake AUX sync length (Jouni) - Fix potential oops on intel_get_crtc_new_encoder() (Ville) Merges: - drm-next backmerges (Rodrigo, Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87zg5eat32.fsf@intel.com
2023-06-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: net/sched/sch_taprio.c d636fc5dd692 ("net: sched: add rcu annotations around qdisc->qdisc_sleeping") dced11ef84fb ("net/sched: taprio: don't overwrite "sch" variable in taprio_dump_class_stats()") net/ipv4/sysctl_net_ipv4.c e209fee4118f ("net/ipv4: ping_group_range: allow GID from 2147483648 to 4294967294") ccce324dabfe ("tcp: make the first N SYN RTO backoffs linear") https://lore.kernel.org/all/20230605100816.08d41a7b@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08riscv: Add prctl controls for userspace vector managementAndy Chiu
This patch add two riscv-specific prctls, to allow usespace control the use of vector unit: * PR_RISCV_V_SET_CONTROL: control the permission to use Vector at next, or all following execve for a thread. Turning off a thread's Vector live is not possible since libraries may have registered ifunc that may execute Vector instructions. * PR_RISCV_V_GET_CONTROL: get the same permission setting for the current thread, and the setting for following execve(s). Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Greentime Hu <greentime.hu@sifive.com> Reviewed-by: Vincent Chen <vincent.chen@sifive.com> Link: https://lore.kernel.org/r/20230605110724.21391-22-andy.chiu@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-06-08riscv: Add ptrace vector supportGreentime Hu
This patch adds ptrace support for riscv vector. The vector registers will be saved in datap pointer of __riscv_v_ext_state. This pointer will be set right after the __riscv_v_ext_state data structure then it will be put in ubuf for ptrace system call to get or set. It will check if the datap got from ubuf is set to the correct address or not when the ptrace system call is trying to set the vector registers. Co-developed-by: Vincent Chen <vincent.chen@sifive.com> Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/20230605110724.21391-13-andy.chiu@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 08:43:14 +0000