summaryrefslogtreecommitdiff
path: root/include/uapi
AgeCommit message (Collapse)Author
2023-04-12dmanegine: idxd: add debugfs for event log dumpDave Jiang
Add debugfs entry to dump the content of the event log for debugging. The function will dump all non-zero entries in the event log. It will note which entries are processed and which entries are still pending processing at the time of the dump. The entries may not always be in chronological order due to the log is a circular buffer. Tested-by: Tony Zhu <tony.zhu@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20230407203143.2189681-6-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-04-12dmaengine: idxd: add interrupt handling for event logDave Jiang
An event log interrupt is raised in the misc interrupt INTCAUSE register when an event is written by the hardware. Add basic event log processing support to the interrupt handler. The event log is a ring where the hardware owns the tail and the software owns the head. The hardware will advance the tail index when an additional event has been pushed to memory. The software will process the log entry and then advances the head. The log is full when (tail + 1) % log_size = head. The hardware will stop writing when the log is full. The user is expected to create a log size large enough to handle all the expected events. Tested-by: Tony Zhu <tony.zhu@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20230407203143.2189681-5-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-04-12dmaengine: idxd: setup event log configurationDave Jiang
Add setup of event log feature for supported device. Event log addresses error reporting that was lacking in gen 1 DSA devices where a second error event does not get reported when a first event is pending software handling. The event log allows a circular buffer that the device can push error events to. It is up to the user to create a large enough event log ring in order to capture the expected events. The evl size can be set in the device sysfs attribute. By default 64 entries are supported as minimal when event log is enabled. Tested-by: Tony Zhu <tony.zhu@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20230407203143.2189681-4-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-04-11bpf: Add log_true_size output field to return necessary log buffer sizeAndrii Nakryiko
Add output-only log_true_size and btf_log_true_size field to BPF_PROG_LOAD and BPF_BTF_LOAD commands, respectively. It will return the size of log buffer necessary to fit in all the log contents at specified log_level. This is very useful for BPF loader libraries like libbpf to be able to size log buffer correctly, but could be used by users directly, if necessary, as well. This patch plumbs all this through the code, taking into account actual bpf_attr size provided by user to determine if these new fields are expected by users. And if they are, set them from kernel on return. We refactory btf_parse() function to accommodate this, moving attr and uattr handling inside it. The rest is very straightforward code, which is split from the logging accounting changes in the previous patch to make it simpler to review logic vs UAPI changes. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-13-andrii@kernel.org
2023-04-11Merge tag 'drm-msm-next-2023-04-10' of ↵Daniel Vetter
https://gitlab.freedesktop.org/drm/msm into drm-next main pull request for v6.4 Core Display: ============ * Bugfixes for error handling during probe * rework UBWC decoder programming * prepare_commit cleanup * bindings for SM8550 (MDSS, DPU), SM8450 (DP) * timeout calculation fixup * atomic: use drm_crtc_next_vblank_start() instead of our own custom thing to calculate the start of next vblank DP: == * interrupts cleanup DPU: === * DSPP sub-block flush on sc7280 * support AR30 in addition to XR30 format * Allow using REC_0 and REC_1 to handle wide (4k) RGB planes * Split the HW catalog into individual per-SoC files DSI: === * rework DSI instance ID detection on obscure platforms GPU: === * uapi C++ compatibility fix * a6xx: More robust gdsc reset * a3xx and a4xx devfreq support * update generated headers * various cleanups and fixes * GPU and GEM updates to avoid allocations which could trigger reclaim (shrinker) in fence signaling path * dma-fence deadline hint support and wait-boost * a640 speedbin support * a650 speedbin support Conflicts in drivers/gpu/drm/msm/adreno/adreno_gpu.c: Conflict between the 7fa5047a436b ("drm: Use of_property_present() for testing DT property presence") and 9f251f934012 ("drm/msm/adreno: Use OPP for every GPU generation"). The latter removed the of_ function call outright, so I went with what's in the PR unchanged. From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvwuj5tabyW910+N-B=5kFNAC7QNYoQ=0xi3roBjQvFFQ@mail.gmail.com Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2023-04-10media: add RealVideo format RV30 and RV40Ming Qian
RealVideo, or also spelled as Real Video, is a suite of proprietary video compression formats developed by RealNetworks - the specific format changes with the version. RealVideo codecs are identified by four-character codes. RV30 and RV40 are RealNetworks' proprietary H.264-based codecs. Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-10media: add Sorenson Spark video formatMing Qian
Sorenson Spark is an implementation of H.263 for use in Flash Video and Adobe Flash files. Sorenson Spark is an incomplete implementation of H.263. It differs mostly in header structure and ranges of the coefficients. Signed-off-by: Ming Qian <ming.qian@nxp.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-08accel/habanalabs/uapi: new Gaudi2 server typeOded Gabbay
Add definition of a new Gaudi2 server type. This represents the connectivity between the cards in that server type. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
2023-04-06drm/msm: Rename drm_msm_gem_submit_reloc::or in C++ codeDanylo Piliaiev
Clashes with C++ `or` keyword Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com> Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/528751/ Link: https://lore.kernel.org/r/20230326163813.535762-1-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06ALSA: document that struct __snd_pcm_mmap_control64 is messed upOswald Buddenhagen
I'm not the first one to run into this, see e.g. https://lore.kernel.org/all/29QBMJU8DE71E.2YZSH8IHT5HMH@mforney.org/ Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Link: https://lore.kernel.org/r/20230406132521.2252019-1-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-04-06Merge tag 'drm-misc-next-2023-04-06' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.4-rc1: UAPI Changes: Cross-subsystem Changes: - Document port and rotation dt bindings better. - For panel timing DT bindings, document that vsync and hsync are first, rather than last in image. - Fix video/aperture typos. Core Changes: - Reject prime DMA-Buf attachment if get_sg_table is missing. (For self-importing dma-buf only.) - Add prime import/export to vram-helper. - Fix oops in drm/vblank when init is not called. - Fixup xres/yres_virtual and other fixes in fb helper. - Improve SCDC debugs. - Skip setting deadline on modesets. - Assorted TTM fixes. Driver Changes: - Add lima usage stats. - Assorted fixes to bridge/lt8192b, tc358767, ivpu, bridge/ti-sn65dsi83, ps8640. - Use pci aperture helpers in drm/ast lynxfb, radeonfb. - Revert some lima patches, as they required a commit that has been reverted upstream. - Add AUO NE135FBM-N41 v8.1 eDP panel. - Add QAIC accel driver. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/64bb9696-a76a-89d9-1866-bcdf7c69c284@linux.intel.com
2023-04-06Merge tag 'drm-intel-gt-next-2023-04-06' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - (Build-time only, should not have any impact) drm/i915/uapi: Replace fake flex-array with flexible-array member "Zero-length arrays as fake flexible arrays are deprecated and we are moving towards adopting C99 flexible-array members instead." This is on core kernel request moving towards GCC 13. Driver Changes: - Fix context runtime accounting on sysfs fdinfo for heavy workloads (Tvrtko) - Add support for OA media units on MTL (Umesh) - Add new workarounds for Meteorlake (Daniele, Radhakrishna, Haridhar) - Fix sysfs to read actual frequency for MTL and Gen6 and earlier (Ashutosh) - Synchronize i915/BIOS on C6 enabling on MTL (Vinay) - Fix DMAR error noise due to GPU error capture (Andrej) - Fix forcewake during BAR resize on discrete (Andrzej) - Flush lmem contents after construction on discrete (Chris) - Fix GuC loading timeout on systems where IFWI programs low boot frequency (John) - Fix race condition UAF in i915_perf_add_config_ioctl (Min) - Sanitycheck MMIO access early in driver load and during forcewake (Matt) - Wakeref fixes for GuC RC error scenario and active VM tracking (Chris) - Cancel HuC delayed load timer on reset (Daniele) - Limit double GT reset to pre-MTL (Daniele) - Use i915 instead of dev_priv insied the file_priv structure (Andi) - Improve GuC load error reporting (John) - Simplify VCS/BSD engine selection logic (Tvrtko) - Perform uc late init after probe error injection (Andrzej) - Fix format for perf_limit_reasons in debugfs (Vinay) - Create per-gt debugfs files (Andi) - Documentation and kerneldoc fixes (Nirmoy, Lee) - Selftest improvements (Fei, Jonathan) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZC6APj/feB+jBf2d@jlahtine-mobl.ger.corp.intel.com
2023-04-06accel/qaic: Add uapi and core driver fileJeffrey Hugo
Add the QAIC driver uapi file and core driver file that binds to the PCIe device. The core driver file also creates the accel device and manages all the interconnections between the different parts of the driver. The driver can be built as a module. If so, it will be called "qaic.ko". Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Acked-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-3-git-send-email-quic_jhugo@quicinc.com
2023-04-05mm: userfaultfd: add UFFDIO_CONTINUE_MODE_WP to install WP PTEsAxel Rasmussen
UFFDIO_COPY already has UFFDIO_COPY_MODE_WP, so when installing a new PTE to resolve a missing fault, one can install a write-protected one. This is useful when using UFFDIO_REGISTER_MODE_{MISSING,WP} in combination. This was motivated by testing HugeTLB HGM [1], and in particular its interaction with userfaultfd features. Existing userfaultfd code supports using WP and MINOR modes together (i.e. you can register an area with both enabled), but without this CONTINUE flag the combination is in practice unusable. So, add an analogous UFFDIO_CONTINUE_MODE_WP, which does the same thing as UFFDIO_COPY_MODE_WP, but for *minor* faults. Update the selftest to do some very basic exercising of the new flag. Update Documentation/ to describe how these flags are used (neither the COPY nor the new CONTINUE versions of this mode flag were described there before). [1]: https://patchwork.kernel.org/project/linux-mm/cover/20230218002819.1486479-1-jthoughton@google.com/ Link: https://lkml.kernel.org/r/20230314221250.682452-5-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Acked-by: Peter Xu <peterx@redhat.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05mm/uffd: UFFD_FEATURE_WP_UNPOPULATEDPeter Xu
Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4. The new feature bit makes anonymous memory acts the same as file memory on userfaultfd-wp in that it'll also wr-protect none ptes. It can be useful in two cases: (1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot, so pre-fault can be replaced by enabling this flag and speed up protections (2) It helps to implement async uffd-wp mode that Muhammad is working on [1] It's debatable whether this is the most ideal solution because with the new feature bit set, wr-protect none pte needs to pre-populate the pgtables to the last level (PAGE_SIZE). But it seems fine so far to service either purpose above, so we can leave optimizations for later. The series brings pte markers to anonymous memory too. There's some change in the common mm code path in the 1st patch, great to have some eye looking at it, but hopefully they're still relatively straightforward. This patch (of 2): This is a new feature that controls how uffd-wp handles none ptes. When it's set, the kernel will handle anonymous memory the same way as file memory, by allowing the user to wr-protect unpopulated ptes. File memories handles none ptes consistently by allowing wr-protecting of none ptes because of the unawareness of page cache being exist or not. For anonymous it was not as persistent because we used to assume that we don't need protections on none ptes or known zero pages. One use case of such a feature bit was VM live snapshot, where if without wr-protecting empty ptes the snapshot can contain random rubbish in the holes of the anonymous memory, which can cause misbehave of the guest when the guest OS assumes the pages should be all zeros. QEMU worked it around by pre-populate the section with reads to fill in zero page entries before starting the whole snapshot process [1]. Recently there's another need raised on using userfaultfd wr-protect for detecting dirty pages (to replace soft-dirty in some cases) [2]. In that case if without being able to wr-protect none ptes by default, the dirty info can get lost, since we cannot treat every none pte to be dirty (the current design is identify a page dirty based on uffd-wp bit being cleared). In general, we want to be able to wr-protect empty ptes too even for anonymous. This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make uffd-wp handling on none ptes being consistent no matter what the memory type is underneath. It doesn't have any impact on file memories so far because we already have pte markers taking care of that. So it only affects anonymous. The feature bit is by default off, so the old behavior will be maintained. Sometimes it may be wanted because the wr-protect of none ptes will contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte markers to anonymous), but also on creating the pgtables to store the pte markers. So there's potentially less chance of using thp on the first fault for a none pmd or larger than a pmd. The major implementation part is teaching the whole kernel to understand pte markers even for anonymously mapped ranges, meanwhile allowing the UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the new feature bit is set. Note that even if the patch subject starts with mm/uffd, there're a few small refactors to major mm path of handling anonymous page faults. But they should be straightforward. With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all the memory before wr-protect during taking a live snapshot. Quotting from Muhammad's test result here [3] based on a simple program [4]: (1) With huge page disabled echo madvise > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 1111453 (pre-fault 1101011) Test MADVISE: 278276 (pre-fault 266378) Test WP-UNPOPULATE: 11712 (2) With Huge page enabled echo always > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 22521 (pre-fault 22348) Test MADVISE: 4909 (pre-fault 4743) Test WP-UNPOPULATE: 14448 There'll be a great perf boost for no-thp case, while for thp enabled with extreme case of all-thp-zero WP_UNPOPULATED can be slower than MADVISE, but that's low possibility in reality, also the overhead was not reduced but postponed until a follow up write on any huge zero thp, so potentially it is faster by making the follow up writes slower. [1] https://lore.kernel.org/all/20210401092226.102804-4-andrey.gruzdev@virtuozzo.com/ [2] https://lore.kernel.org/all/Y+v2HJ8+3i%2FKzDBu@x1n/ [3] https://lore.kernel.org/all/d0eb0a13-16dc-1ac1-653a-78b7273781e3@collabora.com/ [4] https://github.com/xzpeter/clibs/blob/master/uffd-test/uffd-wp-perf.c [peterx@redhat.com: comment changes, oneliner fix to khugepaged] Link: https://lkml.kernel.org/r/ZB2/8jPhD3fpx5U8@x1n Link: https://lkml.kernel.org/r/20230309223711.823547-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20230309223711.823547-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Paul Gofman <pgofman@codeweavers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05sed-opal: Add command to read locking range parameters.Ondrej Kozina
It returns following attributes: locking range start locking range length read lock enabled write lock enabled lock state (RW, RO or LK) It can be retrieved by user authority provided the authority was added to locking range via prior IOC_OPAL_ADD_USR_TO_LR ioctl command. The command was extended to add user in ACE that allows to read attributes listed above. Signed-off-by: Ondrej Kozina <okozina@redhat.com> Tested-by: Luca Boccassi <bluca@debian.org> Tested-by: Milan Broz <gmazyland@gmail.com> Link: https://lore.kernel.org/r/20230405111223.272816-6-okozina@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-05KVM: x86: Redefine 'longmode' as a flag for KVM_EXIT_HYPERCALLOliver Upton
The 'longmode' field is a bit annoying as it blows an entire __u32 to represent a boolean value. Since other architectures are looking to add support for KVM_EXIT_HYPERCALL, now is probably a good time to clean it up. Redefine the field (and the remaining padding) as a set of flags. Preserve the existing ABI by using bit 0 to indicate if the guest was in long mode and requiring that the remaining 31 bits must be zero. Cc: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230404154050.2270077-2-oliver.upton@linux.dev
2023-04-04virtio-blk: fix to match virtio specDmitry Fomichev
The merged patch series to support zoned block devices in virtio-blk is not the most up to date version. The merged patch can be found at https://lore.kernel.org/linux-block/20221016034127.330942-3-dmitry.fomichev@wdc.com/ but the latest and reviewed version is https://lore.kernel.org/linux-block/20221110053952.3378990-3-dmitry.fomichev@wdc.com/ The reason is apparently that the correct mailing lists and maintainers were not copied. The differences between the two are mostly cleanups, but there is one change that is very important in terms of compatibility with the approved virtio-zbd specification. Before it was approved, the OASIS virtio spec had a change in VIRTIO_BLK_T_ZONE_APPEND request layout that is not reflected in the current virtio-blk driver code. In the running code, the status is the first byte of the in-header that is followed by some pad bytes and the u64 that carries the sector at which the data has been written to the zone back to the driver, aka the append sector. This layout turned out to be problematic for implementing in QEMU and the request status byte has been eventually made the last byte of the in-header. The current code doesn't expect that and this causes the append sector value always come as zero to the block layer. This needs to be fixed ASAP. Fixes: 95bfec41bd3d ("virtio-blk: add support for zoned block devices") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Message-Id: <20230330214953.1088216-2-dmitry.fomichev@wdc.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-03io_uring: kill unused notif declarationsPavel Begunkov
There are two leftover structures from the notification registration mechanism that has never been released, kill them. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/f05f65aebaf8b1b5bf28519a8fdb350e3e7c9ad0.1679924536.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-03io_uring: add support for user mapped provided buffer ringJens Axboe
The ring mapped provided buffer rings rely on the application allocating the memory for the ring, and then the kernel will map it. This generally works fine, but runs into issues on some architectures where we need to be able to ensure that the kernel and application virtual address for the ring play nicely together. This at least impacts architectures that set SHM_COLOUR, but potentially also anyone setting SHMLBA. To use this variant of ring provided buffers, the application need not allocate any memory for the ring. Instead the kernel will do so, and the allocation must subsequently call mmap(2) on the ring with the offset set to: IORING_OFF_PBUF_RING | (bgid << IORING_OFF_PBUF_SHIFT) to get a virtual address for the buffer ring. Normally the application would allocate a suitable piece of memory (and correctly aligned) and simply pass that in via io_uring_buf_reg.ring_addr and the kernel would map it. Outside of the setup differences, the kernel allocate + user mapped provided buffer ring works exactly the same. Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-03io_uring/kbuf: rename struct io_uring_buf_reg 'pad' to'flags'Jens Axboe
In preparation for allowing flags to be set for registration, rename the padding and use it for that. Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-31Merge tag 'nf-next-2023-03-30' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next Florian Westphal says: ==================== netfilter updates for net-next 1. No need to disable BH in nfnetlink proc handler, freeing happens via call_rcu. 2. Expose classid in nfetlink_queue, from Eric Sage. 3. Fix nfnetlink message description comments, from Matthieu De Beule. 4. Allow removal of offloaded connections via ctnetlink, from Paul Blakey. * tag 'nf-next-2023-03-30' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: ctnetlink: Support offloaded conntrack entry deletion netfilter: Correct documentation errors in nf_tables.h netfilter: nfnetlink_queue: enable classid socket info retrieval netfilter: nfnetlink_log: remove rcu_bh usage ==================== Link: https://lore.kernel.org/r/20230331104809.2959-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-31dmaengine: idxd: Add descriptor definitions for translation fetch operationFenghua Yu
The translation fetch operation (0x0A) fetches address translations for the address range specified in the descriptor by issuing address translation (ATS) requests to the IOMMU. Add descriptor definitions for the operation so that user can use DSA to accelerate translation fetch. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20230303213413.3357431-4-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-31dmaengine: idxd: Add descriptor definitions for DIX generate operationFenghua Yu
The Data Integrity Extension (DIX) generate operation (0x17) computes the Data Integrity Field (DIF) on the source data and writes only the computed DIF for each source block to the PI destination address. Add descriptor definitions for this operation so that user can use DSA to accelerate DIX generate operation. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20230303213413.3357431-3-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-31dmaengine: idxd: Add descriptor definitions for 16 bytes of pattern in ↵Fenghua Yu
memory fill operation The memory fill operation (0x04) can fill in memory with either 8 bytes or 16 bytes of pattern. To fill in memory with 16 bytes of pattern, the first 8 bytes are provided in pattern lower in bytes 16-23 and the next 8 bytes are in pattern upper in bytes 40-47 in the descriptor. Currently only 8 bytes of pattern is enabled. Add descriptor definitions for pattern lower and pattern upper so that user can use 16 bytes of pattern to fill memory. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20230303213413.3357431-2-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-30Merge tag 'wireless-next-2023-03-30' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== Major stack changes: * TC offload support for drivers below mac80211 * reduced neighbor report (RNR) handling for AP mode * mac80211 mesh fast-xmit and fast-rx support * support for another mesh A-MSDU format (seems nobody got the spec right) Major driver changes: Kalle moved the drivers that were just plain C files in drivers/net/wireless/ to legacy/ and virtual/ dirs. hwsim * multi-BSSID support * some FTM support ath11k * MU-MIMO parameters support * ack signal support for management packets rtl8xxxu * support for RTL8710BU aka RTL8188GU chips rtw89 * support for various newer firmware APIs ath10k * enabled threaded NAPI on WCN3990 iwlwifi * lots of work for multi-link/EHT (wifi7) * hardware timestamping support for some devices/firwmares * TX beacon protection on newer hardware * tag 'wireless-next-2023-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (181 commits) wifi: clean up erroneously introduced file wifi: iwlwifi: mvm: correctly use link in iwl_mvm_sta_del() wifi: iwlwifi: separate AP link management queues wifi: iwlwifi: mvm: free probe_resp_data later wifi: iwlwifi: bump FW API to 75 for AX devices wifi: iwlwifi: mvm: move max_agg_bufsize into host TLC lq_sta wifi: iwlwifi: mvm: send full STA during HW restart wifi: iwlwifi: mvm: rework active links counting wifi: iwlwifi: mvm: update mac config when assigning chanctx wifi: iwlwifi: mvm: use the correct link queue wifi: iwlwifi: mvm: clean up mac_id vs. link_id in MLD sta wifi: iwlwifi: mvm: fix station link data leak wifi: iwlwifi: mvm: initialize max_rc_amsdu_len per-link wifi: iwlwifi: mvm: use appropriate link for rate selection wifi: iwlwifi: mvm: use the new lockdep-checking macros wifi: iwlwifi: mvm: remove chanctx WARN_ON wifi: iwlwifi: mvm: avoid sending MAC context for idle wifi: iwlwifi: mvm: remove only link-specific AP keys wifi: iwlwifi: mvm: skip inactive links wifi: iwlwifi: mvm: adjust iwl_mvm_scan_respect_p2p_go_iter() for MLO ... ==================== Link: https://lore.kernel.org/r/20230330205612.921134-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-30net/sched: act_tunnel_key: add support for "don't fragment"Davide Caratti
extend "act_tunnel_key" to allow specifying TUNNEL_DONT_FRAGMENT. Suggested-by: Ilya Maximets <i.maximets@ovn.org> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-30netfilter: Correct documentation errors in nf_tables.hMatthieu De Beule
NFTA_RANGE_OP incorrectly says nft_cmp_ops instead of nft_range_ops. NFTA_LOG_GROUP and NFTA_LOG_QTHRESHOLD claim NLA_U32 instead of NLA_U16 NFTA_EXTHDR_SREG isn't documented as a register Signed-off-by: Matthieu De Beule <matthieu.debeule@proton.ch> Signed-off-by: Florian Westphal <fw@strlen.de>
2023-03-30netfilter: nfnetlink_queue: enable classid socket info retrievalEric Sage
This enables associating a socket with a v1 net_cls cgroup. Useful for applying a per-cgroup policy when processing packets in userspace. Signed-off-by: Eric Sage <eric_sage@apple.com> Signed-off-by: Florian Westphal <fw@strlen.de>
2023-03-30uapi: net: ipv6: Replace fake flex-array with flex-array memberGustavo A. R. Silva
Zero-length arrays as fake flexible arrays are deprecated and we are moving towards adopting C99 flexible-array members instead. Address the following warning found with GCC-13 and -fstrict-flex-arrays=3 enabled: net/ipv6/exthdrs.c: In function ‘fl6_update_dst’: net/ipv6/exthdrs.c:1393:28: warning: array subscript 0 is outside array bounds of ‘struct in6_addr[0]’ [-Warray-bounds=] 1393 | fl6->daddr = *((struct rt0_hdr *)opt->srcrt)->addr; | ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from ./include/linux/ipv6.h:5, from ./include/linux/icmpv6.h:6, from net/ipv6/exthdrs.c:27: ./include/uapi/linux/ipv6.h:84:33: note: while referencing ‘addr’ 84 | struct in6_addr addr[0]; | ^~~~ net/ipv6/exthdrs.c: In function ‘ipv6_push_rthdr0.isra’: net/ipv6/exthdrs.c:1125:19: warning: array subscript <unknown> is outside array bounds of ‘struct in6_addr[0]’ [-Warray-bounds=] 1125 | phdr->addr[hops - 1] = **addr_p; | ~~~~~~~~~~^~~~~~~~~~ ./include/uapi/linux/ipv6.h:84:33: note: while referencing ‘addr’ 84 | struct in6_addr addr[0]; | ^~~~ This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/21 Link: https://github.com/KSPP/linux/issues/276 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2023-03-30dm: split discards further if target sets max_discard_granularityMike Snitzer
The block core (bio_split_discard) will already split discards based on the 'discard_granularity' and 'max_discard_sectors' queue_limits. But the DM thin target also needs to ensure that it doesn't receive a discard that spans a 'max_discard_sectors' boundary. Introduce a dm_target 'max_discard_granularity' flag that if set will cause DM core to split discard bios relative to 'max_discard_sectors'. This treats 'discard_granularity' as a "min_discard_granularity" and 'max_discard_sectors' as a "max_discard_granularity". Requested-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-03-30KVM: arm64: timers: Allow userspace to set the global counter offsetMarc Zyngier
And this is the moment you have all been waiting for: setting the counter offset from userspace. We expose a brand new capability that reports the ability to set the offset for both the virtual and physical sides. In keeping with the architecture, the offset is expressed as a delta that is substracted from the physical counter value. Once this new API is used, there is no going back, and the counters cannot be written to to set the offsets implicitly (the writes are instead ignored). Reviewed-by: Colton Lewis <coltonlewis@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230330174800.2677007-8-maz@kernel.org
2023-03-30wifi: nl80211: support advertising S1G capabilitiesKieran Frewen
Include S1G capabilities in netlink band info messages. Signed-off-by: Kieran Frewen <kieran.frewen@morsemicro.com> Co-developed-by: Gilad Itzkovitch <gilad.itzkovitch@morsemicro.com> Signed-off-by: Gilad Itzkovitch <gilad.itzkovitch@morsemicro.com> Link: https://lore.kernel.org/r/20230223212917.4010246-1-gilad.itzkovitch@virscient.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-29Merge v6.3-rc4 into drm-nextDaniel Vetter
I just landed the fence deadline PR from Rob that a bunch of drivers want/need to apply driver-specific patches. Backmerge -rc4 so that they don't have to be stuck on -rc2 for no reason at all. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2023-03-29Merge tag 'dma-fence-deadline' of https://gitlab.freedesktop.org/drm/msm ↵Daniel Vetter
into drm-next This series adds a deadline hint to fences, so realtime deadlines such as vblank can be communicated to the fence signaller for power/ frequency management decisions. This is partially inspired by a trick i915 does, but implemented via dma-fence for a couple of reasons: 1) To continue to be able to use the atomic helpers 2) To support cases where display and gpu are different drivers See https://patchwork.freedesktop.org/series/93035/ This does not yet add any UAPI, although this will be needed in a number of cases: 1) Workloads "ping-ponging" between CPU and GPU, where we don't want the GPU freq governor to interpret time stalled waiting for GPU as "idle" time 2) Cases where the compositor is waiting for fences to be signaled before issuing the atomic ioctl, for example to maintain 60fps cursor updates even when the GPU is not able to maintain that framerate. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGt5nDQpa6J86V1oFKPA30YcJzPhAVpmF7N1K1g2N3c=Zg@mail.gmail.com
2023-03-29tracing/user_events: Align structs with tabs for readabilityBeau Belgrave
Add tabs to make struct members easier to read and unify the style of the code. Link: https://lkml.kernel.org/r/20230328235219.203-13-beaub@linux.microsoft.com Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-03-29tracing/user_events: Add ioctl for disabling addressesBeau Belgrave
Enablements are now tracked by the lifetime of the task/mm. User processes need to be able to disable their addresses if tracing is requested to be turned off. Before unmapping the page would suffice. However, we now need a stronger contract. Add an ioctl to enable this. A new flag bit is added, freeing, to user_event_enabler to ensure that if the event is attempted to be removed while a fault is being handled that the remove is delayed until after the fault is reattempted. Link: https://lkml.kernel.org/r/20230328235219.203-6-beaub@linux.microsoft.com Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-03-29tracing/user_events: Use remote writes for event enablementBeau Belgrave
As part of the discussions for user_events aligned with user space tracers, it was determined that user programs should register a aligned value to set or clear a bit when an event becomes enabled. Currently a shared page is being used that requires mmap(). Remove the shared page implementation and move to a user registered address implementation. In this new model during the event registration from user programs 3 new values are specified. The first is the address to update when the event is either enabled or disabled. The second is the bit to set/clear to reflect the event being enabled. The third is the size of the value at the specified address. This allows for a local 32/64-bit value in user programs to support both kernel and user tracers. As an example, setting bit 31 for kernel tracers when the event becomes enabled allows for user tracers to use the other bits for ref counts or other flags. The kernel side updates the bit atomically, user programs need to also update these values atomically. User provided addresses must be aligned on a natural boundary, this allows for single page checking and prevents odd behaviors such as a enable value straddling 2 pages instead of a single page. Currently page faults are only logged, future patches will handle these. Link: https://lkml.kernel.org/r/20230328235219.203-4-beaub@linux.microsoft.com Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-03-29tracing/user_events: Split header into uapi and kernelBeau Belgrave
The UAPI parts need to be split out from the kernel parts of user_events now that other parts of the kernel will reference it. Do so by moving the existing include/linux/user_events.h into include/uapi/linux/user_events.h. Link: https://lkml.kernel.org/r/20230328235219.203-2-beaub@linux.microsoft.com Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-03-29tty: n_gsm: add ioctl for DLC specific parameter configurationDaniel Starke
Parameter negotiation has been introduced with commit 92f1f0c3290d ("tty: n_gsm: add parameter negotiation support") However, means to set individual parameters per DLCI are not yet implemented. Furthermore, it is currently not possible to keep a DLCI half open until the user application sets the right parameters for it. This is required to allow a user application to set its specific parameters before the underlying link is established. Otherwise, the link is opened and re-established right afterwards if the user application sets incompatible parameters. This may be an unexpected behavior for the peer. Add parameter 'wait_config' to 'gsm_config' to support setups where the DLCI specific user application sets its specific parameters after open() and before the link gets fully established. Setting this to zero disables the user application specific DLCI configuration option. Add the ioctls 'GSMIOC_GETCONF_DLCI' and 'GSMIOC_SETCONF_DLCI' for the ldisc and virtual ttys. This gets/sets the DLCI specific parameters and may trigger a reconnect of the DLCI if incompatible values have been set. Only the parameters for the DLCI associated with the virtual tty can be set or retrieved if called on these. Add remark within the documentation to introduce the new ioctls. Link: https://lore.kernel.org/oe-kbuild-all/202302281856.S9Lz4gHB-lkp@intel.com/ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20230315105354.6234-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-29macvlan: Add netlink attribute for broadcast cutoffHerbert Xu
Make the broadcast cutoff configurable through netlink. Note that macvlan is weird because there is no central device for us to configure (the lowerdev could be anything). So all the options are duplicated over what could be thousands of child devices. IFLA_MACVLAN_BC_QUEUE_LEN took the approach of taking the maximum of all child device settings. This is unnecessary as we could simply store the option in the port device and take the last child device that gets updated as the value to use. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-29RDMA/bnxt_re: Add resize_cq supportSelvin Xavier
Add resize_cq verb support for user space CQs. Resize operation for kernel CQs are not supported now. Driver should free the current CQ only after user library polls for all the completions and switch to new CQ. So after the resize_cq is returned from the driver, user library polls for existing completions and store it as temporary data. Once library reaps all completions in the current CQ, it invokes the ibv_cmd_poll_cq to inform the driver about the resize_cq completion. Adding a check for user CQs in driver's poll_cq and complete the resize operation for user CQs. Updating uverbs_cmd_mask with poll_cq to support this. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1678868215-23626-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-03-28drm/msm: Add wait-boost supportRob Clark
Add a way for various userspace waits to signal urgency. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/525817/ Link: https://lore.kernel.org/r/20230308155322.344664-14-robdclark@gmail.com
2023-03-28Merge tag 'dma-fence-deadline' into HEADRob Clark
This series adds a deadline hint to fences, so realtime deadlines such as vblank can be communicated to the fence signaller for power/ frequency management decisions. This is partially inspired by a trick i915 does, but implemented via dma-fence for a couple of reasons: 1) To continue to be able to use the atomic helpers 2) To support cases where display and gpu are different drivers See https://patchwork.freedesktop.org/series/93035/ This does not yet add any UAPI, although this will be needed in a number of cases: 1) Workloads "ping-ponging" between CPU and GPU, where we don't want the GPU freq governor to interpret time stalled waiting for GPU as "idle" time 2) Cases where the compositor is waiting for fences to be signaled before issuing the atomic ioctl, for example to maintain 60fps cursor updates even when the GPU is not able to maintain that framerate. Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-03-28dma-buf/sync_file: Surface sync-file uABIRob Clark
We had all of the internal driver APIs, but not the all important userspace uABI, in the dma-buf doc. Fix that. And re-arrange the comments slightly as otherwise the comments for the ioctl nr defines would not show up. v2: Fix docs build warning coming from newly including the uabi header in the docs build Signed-off-by: Rob Clark <robdclark@chromium.org> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
2023-03-27ethtool: Add support for configuring tx_push_buf_lenShay Agroskin
This attribute, which is part of ethtool's ring param configuration allows the user to specify the maximum number of the packet's payload that can be written directly to the device. Example usage: # ethtool -G [interface] tx-push-buf-len [number of bytes] Co-developed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-24scsi: target: uapi: Replace fake flex-array with flexible-array memberGustavo A. R. Silva
Zero-length arrays as fake flexible arrays are deprecated and we are moving towards adopting C99 flexible-array members instead. Address the following warning found with GCC-13 and -fstrict-flex-arrays=3 enabled: CC drivers/target/target_core_user.o drivers/target/target_core_user.c: In function ‘queue_cmd_ring’: drivers/target/target_core_user.c:1096:15: warning: array subscript 0 is outside array bounds of ‘struct iovec[0]’ [-Warray-bounds=] 1096 | iov = &entry->req.iov[0]; | ^~~~~~~~~~~~~~~~~~ In file included from drivers/target/target_core_user.c:31: ./include/uapi/linux/target_core_user.h:122:38: note: while referencing ‘iov’ 122 | struct iovec iov[0]; | ^~~ This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/21 Link: https://github.com/KSPP/linux/issues/270 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/ZBSchMvTdl7VObKI@work Reviewed-by: Bodo Stroesser <bostroesser@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-24drm/i915/perf: Add support for OA media unitsUmesh Nerlige Ramappa
MTL introduces additional OA units dedicated to media use cases. Add support for programming these OA units by passing the media engine class and instance parameters. UMD specific changes for GPUvis support: https://patchwork.freedesktop.org/patch/522827/?series=114023 https://patchwork.freedesktop.org/patch/522822/?series=114023 https://patchwork.freedesktop.org/patch/522826/?series=114023 https://patchwork.freedesktop.org/patch/522828/?series=114023 https://patchwork.freedesktop.org/patch/522816/?series=114023 https://patchwork.freedesktop.org/patch/522825/?series=114023 v2: (Ashutosh) - check for IP_VER(12, 70) instead of MTL - remove PERF_GROUP_OAG comment in mtl_oa_base - remove oa_buffer.group - use engine->oa_group->type in engine_supports_oa_format - remove fw_domains and use FORCEWAKE_ALL - remove MPES/MPEC comment - s/xehp/mtl/ in b counter validation function name - remove engine_supports_oa in __oa_engine_group - remove warn_ON from __oam_engine_group - refactor oa_init_groups and oa_init_regs - assign g->type correctly - use enum oa_type definition v3: (Ashutosh) - Drop oa_unit_functional as engine_supports_oa is enough v4: - s/DRM_DEBUG/drm_dbg/ Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-10-umesh.nerlige.ramappa@intel.com
2023-03-24drm/i915/perf: Add engine class instance parameters to perfUmesh Nerlige Ramappa
One or more engines map to a specific OA unit. All reports from these engines are captured in the OA buffer managed by this OA unit. Current i915 OA implementation supports only the OAG unit. OAG primarily caters to render engine, so i915 OA uses render as the default engine in the OA implementation. Since there are more OA units on newer hardware that map to other engines, allow user to pass engine class and instance to select and program specific OA units. UMD specific changes for GPUvis support: https://patchwork.freedesktop.org/patch/522827/?series=114023 https://patchwork.freedesktop.org/patch/522822/?series=114023 https://patchwork.freedesktop.org/patch/522826/?series=114023 https://patchwork.freedesktop.org/patch/522828/?series=114023 https://patchwork.freedesktop.org/patch/522816/?series=114023 https://patchwork.freedesktop.org/patch/522825/?series=114023 v2: (Ashutosh) - Clarify commit message - Add drm_dbg - Clarify uapi description v3: (Ashutosh) - Remove irrelevant info from the uapi comment v4: Ensure engine class:instance is passed together (Ashutosh) v5: Remove unnecessary quote (Ashutosh) Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-9-umesh.nerlige.ramappa@intel.com
2023-03-24cfg80211: support RNR for EMA APAloka Dixit
As per IEEE Std 802.11ax-2021, 11.1.3.8.3 Discovery of a nontransmitted BSSID profile, an EMA AP that transmits a Beacon frame carrying a partial list of nontransmitted BSSID profiles should include in the frame a Reduced Neighbor Report element carrying information for at least the nontransmitted BSSIDs that are not present in the Multiple BSSID element carried in that frame. Add new nested attribute NL80211_ATTR_EMA_RNR_ELEMS to support the above. Number of RNR elements must be more than or equal to the number of MBSSID elements. This attribute can be used only when EMA is enabled. Userspace is responsible for splitting the RNR into multiple elements such that each element excludes the non-transmitting profiles already included in the MBSSID element (%NL80211_ATTR_MBSSID_ELEMS) at the same index. Each EMA beacon will be generated by adding MBSSID and RNR elements at the same index. If the userspace provides more RNR elements than the number of MBSSID elements then these will be added in every EMA beacon. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Link: https://lore.kernel.org/r/20230323113801.6903-2-quic_alokad@quicinc.com [Johannes: validate elements] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 08:27:44 +0000