| Age | Commit message (Collapse) | Author |
|---|
|
This enables advertising when LL privacy is enabled and changes the
command sequence when resolving list is updated to also account for when
advertising is enabled using the following sequence:
If there are devices to scan:
Disable Scanning -> Update Accept List ->
use_ll_privacy((Disable Advertising) -> Disable Resolving List ->
Update Resolving List -> Enable Resolving List -> (Enable Advertising)) ->
Enable Scanning
Otherwise:
Disable Scanning
Errors during the Update Accept List stage are handled gracefully by
restoring any previous state (e.g. advertising) and disabling the use of
accept list as either accept list or resolving list could not be
updated.
Tested with:
mgmt-tester -s "LL Privacy"
Test Summary
------------
LL Privacy - Add Device 1 (Add to WL) Passed
LL Privacy - Add Device 2 (Add to RL) Passed
LL Privacy - Add Device 3 (Enable RL) Passed
LL Privacy - Add Device 4 (2 Devices to WL) Passed
LL Privacy - Add Device 5 (2 Devices to RL) Passed
LL Privacy - Add Device 6 (RL is full) Passed
LL Privacy - Add Device 7 (WL is full) Passed
LL Privacy - Add Device 8 (Disable Adv) Passed
LL Privacy - Add Device 9 (Multi Adv) Passed
LL Privacy - Add Device 10 (Multi Dev and Multi Adv) Passed
LL Privacy - Remove Device 1 (Remove from WL) Passed
LL Privacy - Remove Device 2 (Remove from RL) Passed
LL Privacy - Remove Device 3 (Disable RL) Passed
LL Privacy - Remove Device 4 (Disable Adv) Passed
LL Privacy - Remove Device 5 (Multi Adv) Passed
LL Privacy - Start Discovery 1 (Disable RL) Passed
LL Privacy - Start Discovery 2 (Disable RL) Passed
Total: 18, Passed: 18 (100.0%), Failed: 0, Not Run: 0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This make use of hci_cmd_sync_queue for the following MGMT commands:
Add Device
Remove Device
Tested with:
mgmt-tester -s "Add Device"
Test Summary
------------
Add Device - Invalid Params 1 Passed
Add Device - Invalid Params 2 Passed
Add Device - Invalid Params 3 Passed
Add Device - Invalid Params 4 Passed
Add Device - Success 1 Passed
Add Device - Success 2 Passed
Add Device - Success 3 Passed
Add Device - Success 4 Passed
Add Device - Success 5 Passed
Add Device - Success 6 - Add to whitelist Passed
Add Device - Success 7 - Add to resolv list Passed
Add Device - Success 8 - Enable resolv list Passed
Total: 12, Passed: 12 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.209 seconds
mgmt-tester -s "Remove Device"
Test Summary
------------
Remove Device - Invalid Params 1 Passed
Remove Device - Invalid Params 2 Passed
Remove Device - Invalid Params 3 Passed
Remove Device - Success 1 Passed
Remove Device - Success 2 Passed
Remove Device - Success 3 Passed
Remove Device - Success 4 Passed
Remove Device - Success 5 Passed
Remove Device - Success 6 - All Devices Passed
Remove Device - Success 7 - Remove from whitelist Passed
Remove Device - Success 8 - Remove from resolv list Passed
Total: 11, Passed: 11 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 4.26 seconds
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This make use of hci_cmd_sync_queue for the following MGMT commands:
Add Advertising
Remove Advertising
Add Extended Advertising Parameters
Add Extended Advertising Data
mgmt-tester -s "Add Advertising"
Test Summary
------------
Add Advertising - Failure: LE off Passed
Add Advertising - Invalid Params 1 (AD too long) Passed
Add Advertising - Invalid Params 2 (Malformed len) Passed
Add Advertising - Invalid Params 3 (Malformed len) Passed
Add Advertising - Invalid Params 4 (Malformed len) Passed
Add Advertising - Invalid Params 5 (AD too long) Passed
Add Advertising - Invalid Params 6 (ScRsp too long) Passed
Add Advertising - Invalid Params 7 (Malformed len) Passed
Add Advertising - Invalid Params 8 (Malformed len) Passed
Add Advertising - Invalid Params 9 (Malformed len) Passed
Add Advertising - Invalid Params 10 (ScRsp too long) Passed
Add Advertising - Rejected (Timeout, !Powered) Passed
Add Advertising - Success 1 (Powered, Add Adv Inst) Passed
Add Advertising - Success 2 (!Powered, Add Adv Inst) Passed
Add Advertising - Success 3 (!Powered, Adv Enable) Passed
Add Advertising - Success 4 (Set Adv on override) Passed
Add Advertising - Success 5 (Set Adv off override) Passed
Add Advertising - Success 6 (Scan Rsp Dta, Adv ok) Passed
Add Advertising - Success 7 (Scan Rsp Dta, Scan ok) Passed
Add Advertising - Success 8 (Connectable Flag) Passed
Add Advertising - Success 9 (General Discov Flag) Passed
Add Advertising - Success 10 (Limited Discov Flag) Passed
Add Advertising - Success 11 (Managed Flags) Passed
Add Advertising - Success 12 (TX Power Flag) Passed
Add Advertising - Success 13 (ADV_SCAN_IND) Passed
Add Advertising - Success 14 (ADV_NONCONN_IND) Passed
Add Advertising - Success 15 (ADV_IND) Passed
Add Advertising - Success 16 (Connectable -> on) Passed
Add Advertising - Success 17 (Connectable -> off) Passed
Add Advertising - Success 18 (Power -> off, Remove) Passed
Add Advertising - Success 19 (Power -> off, Keep) Passed
Add Advertising - Success 20 (Add Adv override) Passed
Add Advertising - Success 21 (Timeout expires) Passed
Add Advertising - Success 22 (LE -> off, Remove) Passed
Add Advertising - Success (Empty ScRsp) Passed
Add Advertising - Success (ScRsp only) Passed
Add Advertising - Invalid Params (ScRsp too long) Passed
Add Advertising - Success (ScRsp appear) Passed
Add Advertising - Invalid Params (ScRsp appear long) Passed
Add Advertising - Success (Appear is null) Passed
Add Advertising - Success (Name is null) Passed
Add Advertising - Success (Complete name) Passed
Add Advertising - Success (Shortened name) Passed
Add Advertising - Success (Short name) Passed
Add Advertising - Success (Name + data) Passed
Add Advertising - Invalid Params (Name + data) Passed
Add Advertising - Success (Name+data+appear) Passed
Total: 47, Passed: 47 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 2.17 seconds
mgmt-tester -s "Remove Advertising"
Test Summary
------------
Remove Advertising - Invalid Params 1 Passed
Remove Advertising - Success 1 Passed
Remove Advertising - Success 2 Passed
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.0585 seconds
mgmt-tester -s "Ext Adv MGMT Params"
Test Summary:
------------
Ext Adv MGMT Params - Unpowered Passed
Ext Adv MGMT Params - Invalid parameters Passed
Ext Adv MGMT Params - Success Passed
Ext Adv MGMT Params - (5.0) Success Passed
Total: 4, Passed: 4 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.0746 seconds
mgmt-tester -s "Ext Adv MGMT -"
Test Summary
------------
Ext Adv MGMT - Data set without Params Passed
Ext Adv MGMT - AD Data (5.0) Invalid parameters Passed
Ext Adv MGMT - AD Data (5.0) Success Passed
Ext Adv MGMT - AD Scan Response (5.0) Success Passed
Total: 4, Passed: 4 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.0805 seconds
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This make use of hci_cmd_sync_queue for the following MGMT commands:
Set Device Class
Set Device ID
Add UUID
Remove UUID
tools/mgmt-tester -s "Set Device Class"
Test Summary
------------
Set Device Class - Success 1 Passed
Set Device Class - Success 2 Passed
Set Device Class - Invalid parameters 1 Passed
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.0599 seconds
tools/mgmt-tester -s "Set Device ID"
Test Summary
------------
Set Device ID - Success 1 Passed
Set Device ID - Success 2 Passed
Set Device ID - Disable Passed
Set Device ID - Power off and Power on Passed
Set Device ID - SSP off and Power on Passed
Set Device ID - Invalid Parameter Passed
Total: 6, Passed: 6 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.107 seconds
tools/mgmt-tester -s "Add UUID"
Test Summary
------------
Add UUID - UUID-16 1 Passed
Add UUID - UUID-16 multiple 1 Passed
Add UUID - UUID-16 partial 1 Passed
Add UUID - UUID-32 1 Passed
Add UUID - UUID-32 multiple 1 Passed
Add UUID - UUID-32 partial 1 Passed
Add UUID - UUID-128 1 Passed
Add UUID - UUID-128 multiple 1 Passed
Add UUID - UUID-128 partial 1 Passed
Add UUID - UUID mix Passed
Total: 10, Passed: 10 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.198 seconds
tools/mgmt-tester -s "Remove UUID"
Test Summary
------------
Remove UUID - Success 1 Passed
Remove UUID - All UUID - Success 2 Passed
Remove UUID - Power Off - Success 3 Passed
Remove UUID - Power Off and On - Success 4 Passed
Remove UUID - Not Exist - Invalid Params 1 Passed
Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.0908 seconds
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
The usage of __hci_cmd_sync() within the hdev->setup() callback allows for
a nice and simple serialized execution of HCI commands. More importantly
it allows for result processing before issueing the next command.
With the current usage of hci_req_run() it is possible to batch up
commands and execute them, but it is impossible to react to their
results or errors.
This is an attempt to generalize the hdev->setup() handling and provide
a simple way of running multiple HCI commands from a single function
context.
There are multiple struct work that are decdicated to certain tasks
already used right now. It is add a lot of bloat to hci_dev struct and
extra handling code. So it might be possible to put all of these behind
a common HCI command infrastructure and just execute the HCI commands
from the same work context in a serialized fashion.
For example updating the white list and resolving list can be done now
without having to know the list size ahead of time. Also preparing for
suspend or resume shouldn't require a state machine anymore. There are
other tasks that should be simplified as well.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
When a packet of a new flow arrives in openvswitch kernel module, it dissects
the packet and passes the extracted flow key to ovs-vswtichd daemon. If hw-
offload configuration is enabled, the daemon creates a new TC flower entry to
bypass openvswitch kernel module for the flow (TC flower can also offload flows
to NICs but this time that does not matter).
In this processing flow, I found the following issue in cases of GRE/IPIP
packets.
When ovs_flow_key_extract() in openvswitch module parses a packet of a new
GRE (or IPIP) flow received on non-tunneling vports, it extracts information
of the outer IP header for ip_proto/src_ip/dst_ip match keys.
This means ovs-vswitchd creates a TC flower entry with IP protocol/addresses
match keys whose values are those of the outer IP header. OTOH, TC flower,
which uses flow_dissector (different parser from openvswitch module), extracts
information of the inner IP header.
The following flow is an example to describe the issue in more detail.
<----------- Outer IP -----------------> <---------- Inner IP ---------->
+----------+--------------+--------------+----------+----------+----------+
| ip_proto | src_ip | dst_ip | ip_proto | src_ip | dst_ip |
| 47 (GRE) | 192.168.10.1 | 192.168.10.2 | 6 (TCP) | 10.0.0.1 | 10.0.0.2 |
+----------+--------------+--------------+----------+----------+----------+
In this case, TC flower entry and extracted information are shown as below:
- ovs-vswitchd creates TC flower entry with:
- ip_proto: 47
- src_ip: 192.168.10.1
- dst_ip: 192.168.10.2
- TC flower extracts below for IP header matches:
- ip_proto: 6
- src_ip: 10.0.0.1
- dst_ip: 10.0.0.2
Thus, GRE or IPIP packets never match the TC flower entry, as each
dissector behaves differently.
IMHO, the behavior of TC flower (flow dissector) does not look correct,
as ip_proto/src_ip/dst_ip in TC flower match means the outermost IP
header information except for GRE/IPIP cases. This patch adds a new
flow_dissector flag FLOW_DISSECTOR_F_STOP_BEFORE_ENCAP which skips
dissection of the encapsulated inner GRE/IPIP header in TC flower
classifier.
Signed-off-by: Yoshiki Komachi <komachi.yoshiki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that we have an extension for MCTP data in skbs, populate the flow
when a key has been created for the packet, and add a device driver
operation to inform of flow destruction.
Includes a fix for a warning with test builds:
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change adds a new skb extension for MCTP, to represent a
request/response flow.
The intention is to use this in a later change to allow i2c controllers
to correctly configure a multiplexer over a flow.
Since we have a cleanup function in the core path (if an extension is
present), we'll need to make CONFIG_MCTP a bool, rather than a tristate.
Includes a fix for a build warning with clang:
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sctp_transport_pl_hlen() is called to calculate the outer header length
for PL. However, as the Figure in rfc8899#section-4.4:
Any additional
headers .--- MPS -----.
| | |
v v v
+------------------------------+
| IP | ** | PL | protocol data |
+------------------------------+
<----- PLPMTU ----->
<---------- PMTU -------------->
Outer header are IP + Any additional headers, which doesn't include
Packetization Layer itself header, namely sctphdr, whereas sctphdr
is counted by __sctp_mtu_payload().
The incorrect calculation caused the link pathmtu to be set larger
than expected by t->pl.pmtu + sctp_transport_pl_hlen(). This patch
is to fix it by subtracting sctphdr len in sctp_transport_pl_hlen().
Fixes: d9e2e410ae30 ("sctp: add the constants/variables and states and some APIs for transport")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sctp_transport_pl_update() is called when transport update its dst and
pathmtu, instead of stopping the PLPMTUD probe timer, PLPMTUD should
start over and reset the probe timer. Otherwise, the PLPMTUD service
would stop.
Fixes: 92548ec2f1f9 ("sctp: add the probe timer in transport for PLPMTUD")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
include/net/sock.h
7b50ecfcc6cd ("net: Rename ->stream_memory_read to ->sock_is_readable")
4c1e34c0dbff ("vsock: Enable y2038 safe timeval for timeout")
drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c
0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table")
e77bcdd1f639 ("octeontx2-af: Display all enabled PF VF rsrc_alloc entries.")
Adjacent code addition in both cases, keep both.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
using packetdrill it's possible to observe that the receiver key contains
random values when clients transmit MP_CAPABLE with data and checksum (as
specified in RFC8684 §3.1). Fix the layout of mptcp_out_options, to avoid
using the skb extension copy when writing the MP_CAPABLE sub-option.
Fixes: d7b269083786 ("mptcp: shrink mptcp_out_options struct")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/233
Reported-by: Poorva Sonparote <psonparo@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20211027203855.264600-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk->sk_err appears to expect a positive value, a convention that ktls
doesn't always follow and that leads to memory corruption in other code.
For instance,
[kworker]
tls_encrypt_done(..., err=<negative error from crypto request>)
tls_err_abort(.., err)
sk->sk_err = err;
[task]
splice_from_pipe_feed
...
tls_sw_do_sendpage
if (sk->sk_err) {
ret = -sk->sk_err; // ret is positive
splice_from_pipe_feed (continued)
ret = actor(...) // ret is still positive and interpreted as bytes
// written, resulting in underflow of buf->len and
// sd->len, leading to huge buf->offset and bogus
// addresses computed in later calls to actor()
Fix all tls_err_abort() callers to pass a negative error code
consistently and centralize the error-prone sign flip there, throwing in
a warning to catch future misuse and uninlining the function so it
really does only warn once.
Cc: stable@vger.kernel.org
Fixes: c46234ebb4d1e ("tls: RX path for ktls")
Reported-by: syzbot+b187b77c8474f9648fae@syzkaller.appspotmail.com
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We now have INDIRECT_CALL_INET_1() macro, no need to use #ifdef CONFIG_INET
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All tcp_remove_empty_skb() callers now use tcp_write_queue_tail()
for the skb argument, we can therefore factorize code.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A later patch will change the MPTCP memory accounting schema
in such a way that MPTCP sockets will encode the total amount of
forward allocated memory in two separate fields (one for tx and
one for rx).
MPTCP sockets will use their own helper to provide the accurate
amount of fwd allocated memory.
To allow the above, this patch adds a new, optional, sk method to
fetch the fwd memory, wrap the call in a new helper and use it
where it is appropriate.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A following patch is going to implement a similar reclaim schema
for the MPTCP protocol, with different locking.
Let's define a couple of macros for the used thresholds, so
that the latter code will be more easily maintainable.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently rcu_barrier() is used to ensure that no readers of the
inactive mini_Qdisc buffer remain before it is reused. This waits for
any pending RCU callbacks to complete, when all that is actually
required is to wait for one RCU grace period to elapse after the buffer
was made inactive. This means that using rcu_barrier() may result in
unnecessary waits.
To improve this, store the current RCU state when a buffer is made
inactive and use poll_state_synchronize_rcu() to check whether a full
grace period has elapsed before reusing it. If a full grace period has
not elapsed, wait for a grace period to elapse, and in the non-RT case
use synchronize_rcu_expedited() to hasten it.
Since this approach eliminates the RCU callback it is no longer
necessary to synchronize_rcu() in the tp_head==NULL case. However, the
RCU state should still be saved for the previously active buffer.
Before this change I would typically see mini_qdisc_pair_swap() take
tens of milliseconds to complete. After this change it typcially
finishes in less than 1 ms, and often it takes just a few microseconds.
Thanks to Paul for walking me through the options for improving this.
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Seth Forshee <sforshee@digitalocean.com>
Link: https://lore.kernel.org/r/20211026130700.121189-1-seth@forshee.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Two fixes:
* bridge vs. 4-addr mode check was wrong
* management frame registrations locking was
wrong, causing list corruption/crashes
====================
Link: https://lore.kernel.org/r/20211027143756.91711-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To reduce code churn, the same patch makes multiple changes, since they
all touch the same lines:
1. The implementations for these two are identical, just with different
function pointers. Reduce duplications and name the function pointers
"mod_cb" instead of "add_cb" and "del_cb". Pass the event as argument.
2. Drop the "const" attribute from "orig_dev". If the driver needs to
check whether orig_dev belongs to itself and then
call_switchdev_notifiers(orig_dev, SWITCHDEV_FDB_OFFLOADED), it
can't, because call_switchdev_notifiers takes a non-const struct
net_device *.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-10-26
We've added 12 non-merge commits during the last 7 day(s) which contain
a total of 23 files changed, 118 insertions(+), 98 deletions(-).
The main changes are:
1) Fix potential race window in BPF tail call compatibility check, from Toke Høiland-Jørgensen.
2) Fix memory leak in cgroup fs due to missing cgroup_bpf_offline(), from Quanyang Wang.
3) Fix file descriptor reference counting in generic_map_update_batch(), from Xu Kuohai.
4) Fix bpf_jit_limit knob to the max supported limit by the arch's JIT, from Lorenz Bauer.
5) Fix BPF sockmap ->poll callbacks for UDP and AF_UNIX sockets, from Cong Wang and Yucong Sun.
6) Fix BPF sockmap concurrency issue in TCP on non-blocking sendmsg calls, from Liu Jian.
7) Fix build failure of INODE_STORAGE and TASK_STORAGE maps on !CONFIG_NET, from Tejun Heo.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix potential race in tail call compatibility check
bpf: Move BPF_MAP_TYPE for INODE_STORAGE and TASK_STORAGE outside of CONFIG_NET
selftests/bpf: Use recv_timeout() instead of retries
net: Implement ->sock_is_readable() for UDP and AF_UNIX
skmsg: Extract and reuse sk_msg_is_readable()
net: Rename ->stream_memory_read to ->sock_is_readable
tcp_bpf: Fix one concurrency problem in the tcp_bpf_send_verdict function
cgroup: Fix memory leak caused by missing cgroup_bpf_offline
bpf: Fix error usage of map_fd and fdget() in generic_map_update_batch()
bpf: Prevent increasing bpf_jit_limit above max
bpf: Define bpf_jit_alloc_exec_limit for arm64 JIT
bpf: Define bpf_jit_alloc_exec_limit for riscv JIT
====================
Link: https://lore.kernel.org/r/20211026201920.11296-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The proto ops ->stream_memory_read() is currently only used
by TCP to check whether psock queue is empty or not. We need
to rename it before reusing it for non-TCP protocols, and
adjust the exsiting users accordingly.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211008203306.37525-2-xiyou.wangcong@gmail.com
|
|
This change allows an extended address struct - struct sockaddr_mctp_ext
- to be passed to sendmsg/recvmsg. This allows userspace to specify
output ifindex and physical address information (for sendmsg) or receive
the input ifindex/physaddr for incoming messages (for recvmsg). This is
typically used by userspace for MCTP address discovery and assignment
operations.
The extended addressing facility is conditional on a new sockopt:
MCTP_OPT_ADDR_EXT; userspace must explicitly enable addressing before
the kernel will consume/populate the extended address data.
Includes a fix for an uninitialised var:
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sk_stream_alloc_skb() is only used by TCP.
Rename it to make this clear, and move its declaration
to include/net/tcp.h
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
neigh_output() reads n->nud_state and hh->hh_len locklessly.
This is fine, but we need to add annotations and document this.
We evaluate skip_cache first to avoid reading these fields
if the cache has to by bypassed.
syzbot report:
BUG: KCSAN: data-race in __neigh_event_send / ip_finish_output2
write to 0xffff88810798a885 of 1 bytes by interrupt on cpu 1:
__neigh_event_send+0x40d/0xac0 net/core/neighbour.c:1128
neigh_event_send include/net/neighbour.h:444 [inline]
neigh_resolve_output+0x104/0x410 net/core/neighbour.c:1476
neigh_output include/net/neighbour.h:510 [inline]
ip_finish_output2+0x80a/0xaa0 net/ipv4/ip_output.c:221
ip_finish_output+0x3b5/0x510 net/ipv4/ip_output.c:309
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:423
dst_output include/net/dst.h:450 [inline]
ip_local_out+0x164/0x220 net/ipv4/ip_output.c:126
__ip_queue_xmit+0x9d3/0xa20 net/ipv4/ip_output.c:525
ip_queue_xmit+0x34/0x40 net/ipv4/ip_output.c:539
__tcp_transmit_skb+0x142a/0x1a00 net/ipv4/tcp_output.c:1405
tcp_transmit_skb net/ipv4/tcp_output.c:1423 [inline]
tcp_xmit_probe_skb net/ipv4/tcp_output.c:4011 [inline]
tcp_write_wakeup+0x4a9/0x810 net/ipv4/tcp_output.c:4064
tcp_send_probe0+0x2c/0x2b0 net/ipv4/tcp_output.c:4079
tcp_probe_timer net/ipv4/tcp_timer.c:398 [inline]
tcp_write_timer_handler+0x394/0x520 net/ipv4/tcp_timer.c:626
tcp_write_timer+0xb9/0x180 net/ipv4/tcp_timer.c:642
call_timer_fn+0x2e/0x1d0 kernel/time/timer.c:1421
expire_timers+0x135/0x240 kernel/time/timer.c:1466
__run_timers+0x368/0x430 kernel/time/timer.c:1734
run_timer_softirq+0x19/0x30 kernel/time/timer.c:1747
__do_softirq+0x12c/0x26e kernel/softirq.c:558
invoke_softirq kernel/softirq.c:432 [inline]
__irq_exit_rcu kernel/softirq.c:636 [inline]
irq_exit_rcu+0x4e/0xa0 kernel/softirq.c:648
sysvec_apic_timer_interrupt+0x69/0x80 arch/x86/kernel/apic/apic.c:1097
asm_sysvec_apic_timer_interrupt+0x12/0x20
native_safe_halt arch/x86/include/asm/irqflags.h:51 [inline]
arch_safe_halt arch/x86/include/asm/irqflags.h:89 [inline]
acpi_safe_halt drivers/acpi/processor_idle.c:109 [inline]
acpi_idle_do_entry drivers/acpi/processor_idle.c:553 [inline]
acpi_idle_enter+0x258/0x2e0 drivers/acpi/processor_idle.c:688
cpuidle_enter_state+0x2b4/0x760 drivers/cpuidle/cpuidle.c:237
cpuidle_enter+0x3c/0x60 drivers/cpuidle/cpuidle.c:351
call_cpuidle kernel/sched/idle.c:158 [inline]
cpuidle_idle_call kernel/sched/idle.c:239 [inline]
do_idle+0x1a3/0x250 kernel/sched/idle.c:306
cpu_startup_entry+0x15/0x20 kernel/sched/idle.c:403
secondary_startup_64_no_verify+0xb1/0xbb
read to 0xffff88810798a885 of 1 bytes by interrupt on cpu 0:
neigh_output include/net/neighbour.h:507 [inline]
ip_finish_output2+0x79a/0xaa0 net/ipv4/ip_output.c:221
ip_finish_output+0x3b5/0x510 net/ipv4/ip_output.c:309
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:423
dst_output include/net/dst.h:450 [inline]
ip_local_out+0x164/0x220 net/ipv4/ip_output.c:126
__ip_queue_xmit+0x9d3/0xa20 net/ipv4/ip_output.c:525
ip_queue_xmit+0x34/0x40 net/ipv4/ip_output.c:539
__tcp_transmit_skb+0x142a/0x1a00 net/ipv4/tcp_output.c:1405
tcp_transmit_skb net/ipv4/tcp_output.c:1423 [inline]
tcp_xmit_probe_skb net/ipv4/tcp_output.c:4011 [inline]
tcp_write_wakeup+0x4a9/0x810 net/ipv4/tcp_output.c:4064
tcp_send_probe0+0x2c/0x2b0 net/ipv4/tcp_output.c:4079
tcp_probe_timer net/ipv4/tcp_timer.c:398 [inline]
tcp_write_timer_handler+0x394/0x520 net/ipv4/tcp_timer.c:626
tcp_write_timer+0xb9/0x180 net/ipv4/tcp_timer.c:642
call_timer_fn+0x2e/0x1d0 kernel/time/timer.c:1421
expire_timers+0x135/0x240 kernel/time/timer.c:1466
__run_timers+0x368/0x430 kernel/time/timer.c:1734
run_timer_softirq+0x19/0x30 kernel/time/timer.c:1747
__do_softirq+0x12c/0x26e kernel/softirq.c:558
invoke_softirq kernel/softirq.c:432 [inline]
__irq_exit_rcu kernel/softirq.c:636 [inline]
irq_exit_rcu+0x4e/0xa0 kernel/softirq.c:648
sysvec_apic_timer_interrupt+0x69/0x80 arch/x86/kernel/apic/apic.c:1097
asm_sysvec_apic_timer_interrupt+0x12/0x20
native_safe_halt arch/x86/include/asm/irqflags.h:51 [inline]
arch_safe_halt arch/x86/include/asm/irqflags.h:89 [inline]
acpi_safe_halt drivers/acpi/processor_idle.c:109 [inline]
acpi_idle_do_entry drivers/acpi/processor_idle.c:553 [inline]
acpi_idle_enter+0x258/0x2e0 drivers/acpi/processor_idle.c:688
cpuidle_enter_state+0x2b4/0x760 drivers/cpuidle/cpuidle.c:237
cpuidle_enter+0x3c/0x60 drivers/cpuidle/cpuidle.c:351
call_cpuidle kernel/sched/idle.c:158 [inline]
cpuidle_idle_call kernel/sched/idle.c:239 [inline]
do_idle+0x1a3/0x250 kernel/sched/idle.c:306
cpu_startup_entry+0x15/0x20 kernel/sched/idle.c:403
rest_init+0xee/0x100 init/main.c:734
arch_call_rest_init+0xa/0xb
start_kernel+0x5e4/0x669 init/main.c:1142
secondary_startup_64_no_verify+0xb1/0xbb
value changed: 0x20 -> 0x01
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During a testing of an user-space application which transmits UDP
multicast datagrams and utilizes multicast routing to send the UDP
datagrams out of defined network interfaces, I've found a multicast
router does not fill-in UDP checksum into locally produced, looped-back
and forwarded UDP datagrams, if an original output NIC the datagrams
are sent to has UDP TX checksum offload enabled.
The datagrams are sent malformed out of the NIC the datagrams have been
forwarded to.
It is because:
1. If TX checksum offload is enabled on the output NIC, UDP checksum
is not calculated by kernel and is not filled into skb data.
2. dev_loopback_xmit(), which is called solely by
ip_mc_finish_output(), sets skb->ip_summed = CHECKSUM_UNNECESSARY
unconditionally.
3. Since 35fc92a9 ("[NET]: Allow forwarding of ip_summed except
CHECKSUM_COMPLETE"), the ip_summed value is preserved during
forwarding.
4. If ip_summed != CHECKSUM_PARTIAL, checksum is not calculated during
a packet egress.
The minimum fix in dev_loopback_xmit():
1. Preserves skb->ip_summed CHECKSUM_PARTIAL. This is the
case when the original output NIC has TX checksum offload enabled.
The effects are:
a) If the forwarding destination interface supports TX checksum
offloading, the NIC driver is responsible to fill-in the
checksum.
b) If the forwarding destination interface does NOT support TX
checksum offloading, checksums are filled-in by kernel before
skb is submitted to the NIC driver.
c) For local delivery, checksum validation is skipped as in the
case of CHECKSUM_UNNECESSARY, thanks to skb_csum_unnecessary().
2. Translates ip_summed CHECKSUM_NONE to CHECKSUM_UNNECESSARY. It
means, for CHECKSUM_NONE, the behavior is unmodified and is there
to skip a looped-back packet local delivery checksum validation.
Signed-off-by: Cyril Strejc <cyril.strejc@skoda.cz>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RFC 5082 IP_MINTTL option is rarely used on hosts.
Add a static key to remove from TCP fast path useless code,
and potential cache line miss to fetch inet_sk(sk)->min_ttl
Note that once ip4_min_ttl static key has been enabled,
it stays enabled until next boot.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RFC 5082 IPV6_MINHOPCOUNT is rarely used on hosts.
Add a static key to remove from TCP fast path useless code,
and potential cache line miss to fetch tcp_inet6_sk(sk)->min_hopcount
Note that once ip6_min_hopcount static key has been enabled,
it stays enabled until next boot.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk->sk_rx_queue_mapping can be modified locklessly,
add a couple of READ_ONCE()/WRITE_ONCE() to document this fact.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk_rx_queue_mapping is located in a cache line that should be kept read mostly.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk_napi_id is located in a cache line that can be kept read mostly.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Increase cache locality by moving rx_dst_coookie next to sk->sk_rx_dst
This removes one or two cache line misses in IPv6 early demux (TCP/UDP)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Increase cache locality by moving rx_dst_ifindex next to sk->sk_rx_dst
This is part of an effort to reduce cache line misses in TCP fast path.
This removes one cache line miss in early demux.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tls already supports the SM4 GCM/CCM algorithms. It is also necessary
to add support for these two algorithms in tls_crypto_context to avoid
potential issues caused by forced type conversion.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The management registrations locking was broken, the list was
locked for each wdev, but cfg80211_mgmt_registrations_update()
iterated it without holding all the correct spinlocks, causing
list corruption.
Rather than trying to fix it with fine-grained locking, just
move the lock to the wiphy/rdev (still need the list on each
wdev), we already need to hold the wdev lock to change it, so
there's no contention on the lock in any case. This trivially
fixes the bug since we hold one wdev's lock already, and now
will hold the lock that protects all lists.
Cc: stable@vger.kernel.org
Reported-by: Jouni Malinen <j@w1.fi>
Fixes: 6cd536fe62ef ("cfg80211: change internal management frame registration API")
Link: https://lore.kernel.org/r/20211025133111.5cf733eab0f4.I7b0abb0494ab712f74e2efcd24bb31ac33f7eee9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Now that the rtnl_mutex is going away for dsa_port_{host_,}fdb_{add,del},
no one is serializing access to the address lists that DSA keeps for the
purpose of reference counting on shared ports (CPU and cascade ports).
It can happen for one dsa_switch_do_fdb_del to do list_del on a dp->fdbs
element while another dsa_switch_do_fdb_{add,del} is traversing dp->fdbs.
We need to avoid that.
Currently dp->mdbs is not at risk, because dsa_switch_do_mdb_{add,del}
still runs under the rtnl_mutex. But it would be nice if it would not
depend on that being the case. So let's introduce a mutex per port (the
address lists are per port too) and share it between dp->mdbs and
dp->fdbs.
The place where we put the locking is interesting. It could be tempting
to put a DSA-level lock which still serializes calls to
.port_fdb_{add,del}, but it would still not avoid concurrency with other
driver code paths that are currently under rtnl_mutex (.port_fdb_dump,
.port_fast_age). So it would add a very false sense of security (and
adding a global switch-wide lock in DSA to resynchronize with the
rtnl_lock is also counterproductive and hard).
So the locking is intentionally done only where the dp->fdbs and dp->mdbs
lists are traversed. That means, from a driver perspective, that
.port_fdb_add will be called with the dp->addr_lists_lock mutex held on
the CPU port, but not held on user ports. This is done so that driver
writers are not encouraged to rely on any guarantee offered by
dp->addr_lists_lock.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 965e6b262f48257dbdb51b565ecfd84877a0ab5f, reversing
changes made to 4d98bb0d7ec2d0b417df6207b0bafe1868bad9f8.
|
|
Now that the rtnl_mutex is going away for dsa_port_{host_,}fdb_{add,del},
no one is serializing access to the address lists that DSA keeps for the
purpose of reference counting on shared ports (CPU and cascade ports).
It can happen for one dsa_switch_do_fdb_del to do list_del on a dp->fdbs
element while another dsa_switch_do_fdb_{add,del} is traversing dp->fdbs.
We need to avoid that.
Currently dp->mdbs is not at risk, because dsa_switch_do_mdb_{add,del}
still runs under the rtnl_mutex. But it would be nice if it would not
depend on that being the case. So let's introduce a mutex per port (the
address lists are per port too) and share it between dp->mdbs and
dp->fdbs.
The place where we put the locking is interesting. It could be tempting
to put a DSA-level lock which still serializes calls to
.port_fdb_{add,del}, but it would still not avoid concurrency with other
driver code paths that are currently under rtnl_mutex (.port_fdb_dump,
.port_fast_age). So it would add a very false sense of security (and
adding a global switch-wide lock in DSA to resynchronize with the
rtnl_lock is also counterproductive and hard).
So the locking is intentionally done only where the dp->fdbs and dp->mdbs
lists are traversed. That means, from a driver perspective, that
.port_fdb_add will be called with the dp->addr_lists_lock mutex held on
the CPU port, but not held on user ports. This is done so that driver
writers are not encouraged to rely on any guarantee offered by
dp->addr_lists_lock.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The change of devlink_register() to be last devlink command together
with delayed notification logic made the publish API to be obsolete.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Quite a few changes:
* the applicable eth_hw_addr_set() and const hw_addr changes
* various code cleanups/refactorings
* stack usage reductions across the wireless stack
* some unstructured find_ie() -> structured find_element()
changes
* a few more pieces of multi-BSSID support
* some 6 GHz regulatory support
* 6 GHz support in hwsim, for testing userspace code
* Light Communications (LC, 802.11bb) early band definitions
to be able to add a first driver soon
* tag 'mac80211-next-for-net-next-2021-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (35 commits)
cfg80211: fix kernel-doc for MBSSID EMA
mac80211: Prevent AP probing during suspend
nl80211: Add LC placeholder band definition to nl80211_band
...
====================
Link: https://lore.kernel.org/r/20211021154953.134849-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Lots of simnple overlapping additions.
With a build fix from Stephen Rothwell.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The struct member ema_max_profile_periodicity was listed
with the wrong name in the kernel-doc, fix that.
Link: https://lore.kernel.org/r/20211021173038.18ec2030c66b.Iac731bb299525940948adad2c41f514b7dd81c47@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Get channel number from ies is a common logic, so separate it to a new
function, which could also be used by lower driver.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Link: https://lore.kernel.org/r/20210930081533.4898-1-wgong@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
netdev->dev_addr will be const soon.
All callers of wdev_address() can take const already.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20211019162816.1384077-2-kuba@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Ever since Vivien's conversion of the ds->ports array into a dst->ports
list, and the introduction of dsa_to_port, iterations through the ports
of a switch became quadratic whenever dsa_to_port was needed.
dsa_to_port can either be called directly, or indirectly through the
dsa_is_{user,cpu,dsa,unused}_port helpers.
Use the newly introduced dsa_switch_for_each_port() iteration macro
that works with the iterator variable being a struct dsa_port *dp
directly, and not an int i. It is an expensive variable to go from i to
dp, but cheap to go from dp to i.
This macro iterates through the entire ds->dst->ports list and filters
by the ports belonging just to the switch provided as argument.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the DSA conversion from the ds->ports array into the dst->ports
list, the DSA API has encouraged driver writers, as well as the core
itself, to write inefficient code.
Currently, code that wants to filter by a specific type of port when
iterating, like {!unused, user, cpu, dsa}, uses the dsa_is_*_port helper.
Under the hood, this uses dsa_to_port which iterates again through
dst->ports. But the driver iterates through the port list already, so
the complexity is quadratic for the typical case of a single-switch
tree.
This patch introduces some iteration helpers where the iterator is
already a struct dsa_port *dp, so that the other variant of the
filtering functions, dsa_port_is_{unused,user,cpu_dsa}, can be used
directly on the iterator. This eliminates the second lookup.
These functions can be used both by the core and by drivers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit e72aeb9ee0e3 ("fq_codel: implement L4S style ce_threshold_ect1
marking") expanded the ce_threshold feature of FQ-CoDel so it can
be applied to a subset of the traffic, using the ECT(1) bit of the ECN
field as the classifier. However, hard-coding ECT(1) as the only
classifier for this feature seems limiting, so let's expand it to be more
general.
To this end, change the parameter from a ce_threshold_ect1 boolean, to a
one-byte selector/mask pair (ce_threshold_{selector,mask}) which is applied
to the whole diffserv/ECN field in the IP header. This makes it possible to
classify packets by any value in either the ECN field or the diffserv
field. In particular, setting a selector of INET_ECN_ECT_1 and a mask of
INET_ECN_MASK corresponds to the functionality before this patch, and a
mask of ~INET_ECN_MASK allows using the selector as a straight-forward
match against a diffserv code point:
# apply ce_threshold to ECT(1) traffic
tc qdisc replace dev eth0 root fq_codel ce_threshold 1ms ce_threshold_selector 0x1/0x3
# apply ce_threshold to ECN-capable traffic marked as diffserv AF22
tc qdisc replace dev eth0 root fq_codel ce_threshold 1ms ce_threshold_selector 0x50/0xfc
Regardless of the selector chosen, the normal rules for ECN-marking of
packets still apply, i.e., the flow must still declare itself ECN-capable
by setting one of the bits in the ECN field to get marked at all.
v2:
- Add tc usage examples to patch description
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20211019174709.69081-1-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__QDISC_STATE_RUNNING is only set/cleared from contexts owning qdisc lock.
Thus we can use less expensive bit operations, as we were doing
before commit f9eb8aea2a1e ("net_sched: transform qdisc running bit into a seqcount")
Fixes: 29cbcd858283 ("net: sched: Remove Qdisc::running sequence counter")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ahmed S. Darwish <a.darwish@linutronix.de>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For non TCQ_F_NOLOCK qdisc, qdisc_run_begin() tries to set
__QDISC_STATE_RUNNING and should return true if the bit was not set.
test_and_set_bit() returns old bit value, therefore we need to invert.
Fixes: 29cbcd858283 ("net: sched: Remove Qdisc::running sequence counter")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ahmed S. Darwish <a.darwish@linutronix.de>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As another qdisc is linked to the TBF, the latter should issue an event to
give drivers a chance to react to the grafting. In other qdiscs, this event
is called GRAFT, so follow suit with TBF as well.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
