summaryrefslogtreecommitdiff
path: root/include/net/cfg80211.h
AgeCommit message (Collapse)Author
2019-07-20nl80211: fix VENDOR_CMD_RAW_DATAJohannes Berg
Since ERR_PTR() is an inline, not a macro, just open-code it here so it's usable as an initializer, fixing the build in brcmfmac. Reported-by: Arend Van Spriel <arend.vanspriel@broadcom.com> Fixes: 901bb9891855 ("nl80211: require and validate vendor command policy") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Some highlights from this development cycle: 1) Big refactoring of ipv6 route and neigh handling to support nexthop objects configurable as units from userspace. From David Ahern. 2) Convert explored_states in BPF verifier into a hash table, significantly decreased state held for programs with bpf2bpf calls, from Alexei Starovoitov. 3) Implement bpf_send_signal() helper, from Yonghong Song. 4) Various classifier enhancements to mvpp2 driver, from Maxime Chevallier. 5) Add aRFS support to hns3 driver, from Jian Shen. 6) Fix use after free in inet frags by allocating fqdirs dynamically and reworking how rhashtable dismantle occurs, from Eric Dumazet. 7) Add act_ctinfo packet classifier action, from Kevin Darbyshire-Bryant. 8) Add TFO key backup infrastructure, from Jason Baron. 9) Remove several old and unused ISDN drivers, from Arnd Bergmann. 10) Add devlink notifications for flash update status to mlxsw driver, from Jiri Pirko. 11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski. 12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes. 13) Various enhancements to ipv6 flow label handling, from Eric Dumazet and Willem de Bruijn. 14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van der Merwe, and others. 15) Various improvements to axienet driver including converting it to phylink, from Robert Hancock. 16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean. 17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana Radulescu. 18) Add devlink health reporting to mlx5, from Moshe Shemesh. 19) Convert stmmac over to phylink, from Jose Abreu. 20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from Shalom Toledo. 21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera. 22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel. 23) Track spill/fill of constants in BPF verifier, from Alexei Starovoitov. 24) Support bounded loops in BPF, from Alexei Starovoitov. 25) Various page_pool API fixes and improvements, from Jesper Dangaard Brouer. 26) Just like ipv4, support ref-countless ipv6 route handling. From Wei Wang. 27) Support VLAN offloading in aquantia driver, from Igor Russkikh. 28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy. 29) Add flower GRE encap/decap support to nfp driver, from Pieter Jansen van Vuuren. 30) Protect against stack overflow when using act_mirred, from John Hurley. 31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen. 32) Use page_pool API in netsec driver, Ilias Apalodimas. 33) Add Google gve network driver, from Catherine Sullivan. 34) More indirect call avoidance, from Paolo Abeni. 35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan. 36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek. 37) Add MPLS manipulation actions to TC, from John Hurley. 38) Add sending a packet to connection tracking from TC actions, and then allow flower classifier matching on conntrack state. From Paul Blakey. 39) Netfilter hw offload support, from Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits) net/mlx5e: Return in default case statement in tx_post_resync_params mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync(). net: dsa: add support for BRIDGE_MROUTER attribute pkt_sched: Include const.h net: netsec: remove static declaration for netsec_set_tx_de() net: netsec: remove superfluous if statement netfilter: nf_tables: add hardware offload support net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload net: flow_offload: add flow_block_cb_is_busy() and use it net: sched: remove tcf block API drivers: net: use flow block API net: sched: use flow block API net: flow_offload: add flow_block_cb_{priv, incref, decref}() net: flow_offload: add list handling functions net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free() net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND net: flow_offload: add flow_block_cb_setup_simple() net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC ...
2019-07-03Merge branch 'timers/vdso' into timers/coreThomas Gleixner
so the hyper-v clocksource update can be applied.
2019-06-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor SPDX change conflict. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-22timekeeping: Use proper clock specifier names in functionsJason A. Donenfeld
This makes boot uniformly boottime and tai uniformly clocktai, to address the remaining oversights. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/20190621203249.3909-2-Jason@zx2c4.com
2019-06-21Merge tag 'spdx-5.2-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull still more SPDX updates from Greg KH: "Another round of SPDX updates for 5.2-rc6 Here is what I am guessing is going to be the last "big" SPDX update for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates that were "easy" to determine by pattern matching. The ones after this are going to be a bit more difficult and the people on the spdx list will be discussing them on a case-by-case basis now. Another 5000+ files are fixed up, so our overall totals are: Files checked: 64545 Files with SPDX: 45529 Compared to the 5.1 kernel which was: Files checked: 63848 Files with SPDX: 22576 This is a huge improvement. Also, we deleted another 20000 lines of boilerplate license crud, always nice to see in a diffstat" * tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485 ...
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Honestly all the conflicts were simple overlapping changes, nothing really interesting to report. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14nl80211: send event when CMD_FRAME duration expiresJames Prestwood
cfg80211_remain_on_channel_expired is used to notify userspace when the remain on channel duration expired by sending an event. There is no such equivalent to CMD_FRAME, where if offchannel and a duration is provided, the card will go offchannel for that duration. Currently there is no way for userspace to tell when that duration expired apart from setting an independent timeout. This timeout is quite erroneous as the kernel may not immediately send out the frame because of scheduling or work queue delays. In testing, it was found this timeout had to be quite large to accomidate any potential delays. A better solution is to have the kernel send an event when this duration has expired. There is already NL80211_CMD_FRAME_WAIT_CANCEL which can be used to cancel a NL80211_CMD_FRAME offchannel. Using this command matches perfectly to how NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL works, where its both used to cancel and notify if the duration has expired. Signed-off-by: James Prestwood <james.prestwood@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14cfg80211: Add a function to iterate all BSS entriesIlan Peer
Add a function that iterates over the BSS entries associated with a given wiphy and calls a callback for each iterated BSS. This can be used by drivers in various ways, e.g., to evaluate some property for all the BSSs in the medium. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14mac80211: allow turning TWT responder support on and off via netlinkJohn Crispin
Allow the userland daemon to en/disable TWT support for an AP. Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: John Crispin <john@phrozen.org> [simplify parsing code] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14nl80211: require and validate vendor command policyJohannes Berg
Require that each vendor command give a policy of its sub-attributes in NL80211_ATTR_VENDOR_DATA, and then (stricly) check the contents, including the NLA_F_NESTED flag that we couldn't check on the outer layer because there we don't know yet. It is possible to use VENDOR_CMD_RAW_DATA for raw data, but then no nested data can be given (NLA_F_NESTED flag must be clear) and the data is just passed as is to the command. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14mac80211: add ieee80211_get_he_iftype_cap() helperJohn Crispin
This function is similar to ieee80211_get_he_sta_cap() but allows passing the iftype. Also make ieee80211_get_he_sta_cap() use the new helper rather than duplicating the code. Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14nl80211: add support for SAE authentication offloadChung-Hsien Hsu
Let drivers advertise support for station-mode SAE authentication offload with a new NL80211_EXT_FEATURE_SAE_OFFLOAD flag. Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-05-28cfg80211: Handle bss expiry during connectionChaitanya Tata
If the BSS is expired during connection, the connect result will trigger a kernel warning. Ideally cfg80211 should hold the BSS before the connection is attempted, but as the BSSID is not known in case of auth/assoc MLME offload (connect op) it doesn't. For those drivers without the connect op cfg80211 holds down the reference so it wil not be removed from list. Fix this by removing the warning and silently adding the BSS back to the bss list which is return by the driver (with proper BSSID set) or in case the BSS is already added use that. The requirements for drivers are documented in the API's. Signed-off-by: Chaitanya Tata <chaitanya.tata@bluwireless.co.uk> [formatting fixes, keep old timestamp] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-05-24{nl,mac}80211: allow 4addr AP operation on crypto controlled devicesManikanta Pubbisetty
As per the current design, in the case of sw crypto controlled devices, it is the device which advertises the support for AP/VLAN iftype based on it's ability to tranmsit packets encrypted in software (In VLAN functionality, group traffic generated for a specific VLAN group is always encrypted in software). Commit db3bdcb9c3ff ("mac80211: allow AP_VLAN operation on crypto controlled devices") has introduced this change. Since 4addr AP operation also uses AP/VLAN iftype, this conditional way of advertising AP/VLAN support has broken 4addr AP mode operation on crypto controlled devices which do not support VLAN functionality. In the case of ath10k driver, not all firmwares have support for VLAN functionality but all can support 4addr AP operation. Because AP/VLAN support is not advertised for these devices, 4addr AP operations are also blocked. Fix this by allowing 4addr operation on devices which do not support AP/VLAN iftype but can support 4addr AP operation (decision is based on the wiphy flag WIPHY_FLAG_4ADDR_AP). Cc: stable@vger.kernel.org Fixes: db3bdcb9c3ff ("mac80211: allow AP_VLAN operation on crypto controlled devices") Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26Merge tag 'mac80211-next-for-davem-2019-04-26' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Various updates, notably: * extended key ID support (from 802.11-2016) * per-STA TX power control support * mac80211 TX performance improvements * HE (802.11ax) updates * mesh link probing support * enhancements of multi-BSSID support (also related to HE) * OWE userspace processing support ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26cfg80211: add support to probe unexercised mesh linkRajkumar Manoharan
Adding support to allow mesh HWMP to measure link metrics on unexercised direct mesh path by sending some data frames to other mesh points which are not currently selected as a primary traffic path but only 1 hop away. The absence of the primary path to the chosen node makes it necessary to apply some form of marking on a chosen packet stream so that the packets can be properly steered to the selected node for testing, and not by the regular mesh path lookup. Tested-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26cfg80211: don't pass pointer to pointer unnecessarilyDan Carpenter
The cfg80211_merge_profile() and ieee802_11_find_bssid_profile() are a bit cleaner if we just pass the merged_ie pointer instead of a pointer to the pointer. This isn't a functional change, it's just a clean up. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26cfg80211: Add support to set tx power for a station associatedAshok Raj Nagarajan
This patch adds support to set transmit power setting type and transmit power level attributes to NL80211_CMD_SET_STATION in order to facilitate adjusting the transmit power level of a station associated to the AP. The added attributes allow selection of automatic and limited transmit power level, with the level defined in dBm format. Co-developed-by: Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: Ashok Raj Nagarajan <arnagara@codeaurora.org> Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26nl80211/cfg80211: Extended Key ID supportAlexander Wetzel
Add support for IEEE 802.11-2016 "Extended Key ID for Individually Addressed Frames". Extend cfg80211 and nl80211 to allow pairwise keys to be installed for Rx only, enable Tx separately and allow Key ID 1 for pairwise keys. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> [use NLA_POLICY_RANGE() for NL80211_KEY_MODE] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26cfg80211: support profile split between elementsSara Sharon
Since an element is limited to 255 octets, a profile may be split split to several elements. Support the split as defined in the 11ax draft 3. Detect legacy split and print a net-rate limited warning, since there is no ROI in supporting this probably non-existent split. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26cfg80211: support non-inheritance elementSara Sharon
Subelement profile may specify element IDs it doesn't inherit from the management frame. Support it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-08cfg80211/nl80211: Offload OWE processing to user space in AP modeSunil Dutt
This interface allows the host driver to offload OWE processing to user space. This intends to support OWE (Opportunistic Wireless Encryption) AKM by the drivers that implement SME but rely on the user space for the cryptographic/OWE processing in AP mode. Such drivers are not capable of processing/deriving the DH IE. A new NL80211 command - NL80211_CMD_UPDATE_OWE_INFO is introduced to send the request/event between the host driver and user space. Driver shall provide the OWE info (MAC address and DH IE) of the peer to user space for cryptographic processing of the DH IE through the event. Accordingly, the user space shall update the OWE info/DH IE to the driver. Following is the sequence in AP mode for OWE authentication. Driver passes the OWE info obtained from the peer in the Association Request to the user space through the event cfg80211_update_owe_info_event. User space shall process the OWE info received and generate new OWE info. This OWE info is passed to the driver through NL80211_CMD_UPDATE_OWE_INFO request. Driver eventually uses this OWE info to send the Association Response to the peer. This OWE info in the command interface carries the IEs that include PMKID of the peer if the PMKSA is still valid or an updated DH IE for generating a new PMKSA with the peer. Signed-off-by: Liangwei Dong <liangwei@codeaurora.org> Signed-off-by: Sunil Dutt <usdutt@codeaurora.org> Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org> [remove policy initialization - no longer exists] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-08mac80211: Add support for NL80211_STA_INFO_AIRTIME_LINK_METRICNarayanraddi Masti
Add support for mesh airtime link metric attribute NL80211_STA_INFO_AIRTIME_LINK_METRIC. Signed-off-by: Narayanraddi Masti <team.nmasti@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-08nl80211/cfg80211: Specify band specific min RSSI thresholds with sched scanvamsi krishna
This commit adds the support to specify the RSSI thresholds per band for each match set. This enhances the current behavior which specifies a single rssi_threshold across all the bands by introducing the rssi_threshold_per_band. These per band rssi thresholds are referred through NL80211_BAND_* (enum nl80211_band) variables as attribute types. Such attributes/values per each band are nested through NL80211_ATTR_SCHED_SCAN_MIN_RSSI. These band specific rssi thresholds shall take precedence over the current rssi_thold per match set. Drivers indicate this support through %NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD. These per band rssi attributes/values does not specify "default RSSI filter" as done by NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to stay backward compatible. That said, these per band rssi values have to be specified for the corresponding matchset. Signed-off-by: vamsi krishna <vamsin@codeaurora.org> Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org> [rebase on refactoring, add policy] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-08cfg80211: add ratelimited variants of err and warnStanislaw Gruszka
wiphy_{err,warn}_ratelimited will be used by rt2x00 Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22cfg80211: allow sending vendor events unicastJohannes Berg
Sometimes, we may want to transport higher bandwidth data through vendor events, and in that case sending it multicast is a bad idea. Allow vendor events to be unicast. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22cfg80211: Report Association Request frame IEs in association eventsJouni Malinen
This extends the NL80211_CMD_ASSOCIATE event case to report NL80211_ATTR_REQ_IE similarly to what is already done with the NL80211_CMD_CONNECT events if the driver provides this information. In practice, this adds (Re)Association Request frame information element reporting to mac80211 drivers for the cases where user space SME is used. This provides more information for user space to figure out which capabilities were negotiated for the association. For example, this can be used to determine whether HT, VHT, or HE is used. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11cfg80211: fix and clean up cfg80211_gen_new_bssid()Johannes Berg
Fix cfg80211_gen_new_bssid() to not rely on u64 modulo arithmetic, which isn't needed since we really just want to mask there. Also, clean it up to calculate the mask only once and use GENMASK_ULL() instead of open-coding the mask calculation. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: add missing kernel-doc for multi-BSSID fieldsJohannes Berg
Add the missing kernel-doc for the new multi-BSSID fields in struct cfg80211_bss. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: save multi-bssid propertiesSara Sharon
When the new IEs are generated, the multiple BSSID elements are not saved. Save aside properties that are needed later for PS. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: make BSSID generation function inlineSara Sharon
This will enable reuse by mac80211. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: parse multi-bssid only if HW supports itSara Sharon
Parsing and exposing nontransmitted APs is problematic when underlying HW doesn't support it. Do it only if driver indicated support. Allow HE restriction as well, since the HE spec defined the exact manner that Multiple BSSID set should behave. APs that not support the HE spec will have less predictable Multiple BSSID set support/behavior Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: Move Multiple BSS info to struct cfg80211_bss to be visibleSara Sharon
Previously the transmitted BSS and the non-trasmitted BSS list were defined in struct cfg80211_internal_bss. Move them to struct cfg80211_bss since mac80211 needs this info. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: add various struct element finding helpersJohannes Berg
We currently have a number of helpers to find elements that just return a u8 *, change those to return a struct element and add inlines to deal with the u8 * compatibility. Note that the match behaviour is changed to start the natch at the data, so conversion from _ie_match to _elem_match need to be done carefully. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-01cfg80211: add missing documentation that kernel-doc warns aboutJohannes Berg
Add the missing documentation that kernel-doc continually warns about, to get rid of all that noise. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-01cfg80211: fix typoMatteo Croce
Fix spelling mistake in cfg80211.h: "lenght" -> "length". The typo is also in the special comment block which translates to documentation. Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-25cfg80211: Authentication offload to user space in AP modeSrinivas Dasari
commit 40cbfa90218b ("cfg80211/nl80211: Optional authentication offload to userspace")' introduced authentication offload to user space by the host drivers in station mode. This commit extends the same for the AP mode too. Extend NL80211_ATTR_EXTERNAL_AUTH_SUPPORT to also claim the support of external authentication from the user space in AP mode. A new flag parameter is introduced in cfg80211_ap_settings to intend the same while "start ap". Host driver to use NL80211_CMD_FRAME interface to transmit and receive the authentication frames to / from the user space. Host driver to indicate the flag NL80211_RXMGMT_FLAG_EXTERNAL_AUTH while sending the authentication frame to the user space. This intends to the user space that the driver wishes it to process the authentication frame for certain protocols, though it had initially advertised the support for SME functionality. User space shall accordingly do the authentication and indicate its final status through the command NL80211_CMD_EXTERNAL_AUTH. Allow the command even if userspace doesn't include the attribute NL80211_ATTR_SSID for AP interface. Host driver shall continue with the association sequence and indicate the STA connection status through cfg80211_new_sta. To facilitate the host drivers in AP mode for matching the pmkid by the stations during the association, NL80211_CMD_EXTERNAL_AUTH is also enhanced to include the pmkid to drivers after the authentication. This pmkid can also be used in the STA mode to include in the association request. Also modify nl80211_external_auth to not mandate SSID in AP mode. Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org> [remove useless nla_get_flag() usage] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-25cfg80211: Allow drivers to advertise supported AKM suitesVeerendranath Jakkam
There was no such capability advertisement from the driver and thus the current user space has to assume the driver to support all the AKMs. While that may be the case with some drivers (e.g., mac80211-based ones), there are cfg80211-based drivers that implement SME and have constraints on which AKMs can be supported (e.g., such drivers may need an update to support SAE AKM using NL80211_CMD_EXTERNAL_AUTH). Allow such drivers to advertise the exact set of supported AKMs so that user space tools can determine what network profile options should be allowed to be configured. Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org> [pmsr data might be big, start a new netlink message section] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-19nl80211/mac80211: mesh: add mesh path change count to mpath infoJulan Hsu
Expose path change count to destination in mpath info Signed-off-by: Julan Hsu <julanhsu@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-19nl80211/mac80211: mesh: add hop count to mpath infoJulan Hsu
Expose hop count to destination information in mpath info Signed-off-by: Julan Hsu <julanhsu@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-19cfg80211: Add airtime statistics and settingsToke Høiland-Jørgensen
This adds TX airtime statistics to the cfg80211 station dump (to go along with the RX info already present), and adds a new parameter to set the airtime weight of each station. The latter allows userspace to implement policies for different stations by varying their weights. Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> [rmanohar@codeaurora.org: fixed checkpatch warnings] Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> [move airtime weight != 0 check into policy] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18cfg80211: clarify LCI/civic location documentationJohannes Berg
The older code and current userspace assumed that this data is the content of the Measurement Report element, starting with the Measurement Token. Clarify this in the documentation. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18wireless: FTM: fix kernel-doc "cannot understand" warningsRandy Dunlap
Fix kernel-doc warnings in FTM due to missing "struct" keyword. Fixes 109 warnings from <net/cfg80211.h>: ../include/net/cfg80211.h:2838: warning: cannot understand function prototype: 'struct cfg80211_ftm_responder_stats ' and fixes 88 warnings from <net/mac80211.h>: ../include/net/mac80211.h:477: warning: cannot understand function prototype: 'struct ieee80211_ftm_responder_params ' Fixes: 81e54d08d9d8 ("cfg80211: support FTM responder configuration/statistics") Fixes: bc847970f432 ("mac80211: support FTM responder configuration/statistics") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-09{nl,mac}80211: add rssi to mesh candidatesBob Copeland
When peering is in userspace, some implementations may want to control which peers are accepted based on RSSI in addition to the information elements being sent today. Add signal level so that info is available to clients. Signed-off-by: Bob Copeland <bobcopeland@fb.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-09{nl,mac}80211: add dot11MeshConnectedToMeshGate to meshconfBob Copeland
When userspace is controlling mesh routing, it may have better knowledge about whether a mesh STA is connected to a mesh gate than the kernel mpath table. Add dot11MeshConnectedToMeshGate to the mesh config so that such applications can explicitly signal that a mesh STA is connected to a gate, which will then be advertised in the beacon. Signed-off-by: Bob Copeland <bobcopeland@fb.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-09{nl,mac}80211: report gate connectivity in station infoBob Copeland
Capture the current state of gate connectivity from the mesh formation field in mesh config whenever we receive a beacon, and report that via GET_STATION. This allows applications doing mesh peering in userspace to make peering decisions based on peers' current upstream connectivity. Signed-off-by: Bob Copeland <bobcopeland@fb.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-09cfg80211: add peer measurement with FTM initiator APIJohannes Berg
Add a new "peer measurement" API, that can be used to measure certain things related to a peer. Right now, only implement FTM (flight time measurement) over it, but the idea is that it'll be extensible to also support measuring the necessary things to calculate e.g. angle-of-arrival for WiGig. The API is structured to have a generic list of peers and channels to measure with/on, and then for each of those a set of measurements (again, only FTM right now) to perform. Results are sent to the requesting socket, including a final complete message. Closing the controlling netlink socket will abort a running measurement. v3: - add a bit to report "final" for partial results - remove list keeping etc. and just unicast out the results to the requester (big code reduction ...) - also send complete message unicast, and as a result remove the multicast group - separate out struct cfg80211_pmsr_ftm_request_peer from struct cfg80211_pmsr_request_peer - document timeout == 0 if no timeout - disallow setting timeout nl80211 attribute to 0, must not include attribute for no timeout - make MAC address randomization optional - change num bursts exponent default to 0 (1 burst, rather rather than the old default of 15==don't care) v4: - clarify NL80211_ATTR_TIMEOUT documentation v5: - remove unnecessary nl80211 multicast/family changes - remove partial results bit/flag, final is sufficient - add max_bursts_exponent, max_ftms_per_burst to capability - rename "frames per burst" -> "FTMs per burst" v6: - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down() and call it in leave, so the device can't go down with any pending measurements v7: - wording fixes (Lior) - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior) v8: - copyright statements - minor coding style fixes - fix error path leak Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-12nl80211: Add per peer statistics to compute FCS error rateAnkita Bajaj
Add support for drivers to report the total number of MPDUs received and the number of MPDUs received with an FCS error from a specific peer. These counters will be incremented only when the TA of the frame matches the MAC address of the peer irrespective of FCS error. It should be noted that the TA field in the frame might be corrupted when there is an FCS error and TA matching logic would fail in such cases. Hence, FCS error counter might not be fully accurate, but it can provide help in detecting bad RX links in significant number of cases. This FCS error counter without full accuracy can be used, e.g., to trigger a kick-out of a connected client with a bad link in AP mode to force such a client to roam to another AP. Signed-off-by: Ankita Bajaj <bankita@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 04:52:42 +0000