summaryrefslogtreecommitdiff
path: root/include/net/bluetooth/l2cap.h
AgeCommit message (Collapse)Author
2011-02-16Bluetooth: Add connection parameter update responseClaudio Takahasi
Implements L2CAP Connection Parameter Update Response defined in the Bluetooth Core Specification, Volume 3, Part A, section 4.21. Address the LE Connection Parameter Procedure initiated by the slave. Connection Interval Minimum and Maximum have the same range: 6 to 3200. Time = N * 1.25ms. Minimum shall be less or equal to Maximum. The Slave Latency field shall have a value in the range of 0 to ((connSupervisionTimeout / connIntervalMax) - 1). Latency field shall be less than 500. connSupervisionTimeout = Timeout Multiplier * 10 ms. Multiplier field shall have a value in the range of 10 to 3200. Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Add LE signaling commands handlingClaudio Takahasi
This patch splits the L2CAP command handling function in order to have a clear separation between the commands related to BR/EDR and LE. Commands and responses in the LE signaling channel are not being handled yet, command reject is sent to all received requests. Bluetooth Core Specification, Volume 3, Part A, section 4 defines the signaling packets formats and allowed commands/responses over the LE signaling channel. Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Add server socket support for LE connectionVille Tervo
Add support for LE server sockets. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Add LE connection support to L2CAPVille Tervo
Add basic LE connection support to L2CAP. LE connection can be created by specifying cid in struct sockaddr_l2 Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-15Bluetooth: remove l2cap_load() hackGustavo F. Padovan
l2cap_load() was added to trigger l2cap.ko module loading from the RFCOMM and BNEP modules. Now that L2CAP module is gone, we don't need it anymore. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move __l2cap_sock_close() to l2cap_sock.cGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move l2cap_sock_sendmsg() to l2cap_sock.cGustavo F. Padovan
Also moves some L2CAP sending functions declaration to l2cap.h Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move l2cap_sock_shutdown() to l2cap_sock.cGustavo F. Padovan
Declare __l2cap_wait_ack() and l2cap_sock_clear_timer() in l2cap.h Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move l2cap_sock_recvmsg() to l2cap_sock.cGustavo F. Padovan
It causes the move of the declaration of 3 functions to l2cap.h: l2cap_get_ident(), l2cap_send_cmd(), l2cap_build_conf_req() Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move l2cap_sock_connect() to l2cap_sock.cGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move l2cap_sock_getsockopt() to l2cap_sock.cGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move l2cap_sock_setsockopt() to l2cap_sock.cGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move l2cap_sock_getname() to l2cap_sock.cGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move l2cap_sock_accept() to l2cap_sock.cGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move l2cap_sock_bind()/listen() to l2cap_sock.cGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move l2cap_sock_release() to l2cap_sock.cGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: move l2cap_sock_ops to l2cap_sock.cGustavo F. Padovan
First step to move all l2cap_sock_ops function to l2cap_sock.c Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: Initial work for L2CAP split.Gustavo F. Padovan
This patch tries to do the minimal to move l2cap_sock_create() and its dependencies to l2cap_sock.c. It create a API to initialize and cleanup the L2CAP sockets from l2cap_core.c through l2cap_init_sockets() and l2cap_cleanup_sockets(). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: Use non-flushable by default L2CAP data packetsAndrei Emeltchenko
Modification of Nick Pelly <npelly@google.com> patch. With Bluetooth 2.1 ACL packets can be flushable or non-flushable. This commit makes ACL data packets non-flushable by default on compatible chipsets, and adds the BT_FLUSHABLE socket option to explicitly request flushable ACL data packets for a given L2CAP socket. This is useful for A2DP data which can be safely discarded if it can not be delivered within a short time (while other ACL data should not be discarded). Note that making ACL data flushable has no effect unless the automatic flush timeout for that ACL link is changed from its default of 0 (infinite). Default packet types (for compatible chipsets): Frame 34: 13 bytes on wire (104 bits), 13 bytes captured (104 bits) Bluetooth HCI H4 Bluetooth HCI ACL Packet .... 0000 0000 0010 = Connection Handle: 0x0002 ..00 .... .... .... = PB Flag: First Non-automatically Flushable Packet (0) 00.. .... .... .... = BC Flag: Point-To-Point (0) Data Total Length: 8 Bluetooth L2CAP Packet After setting BT_FLUSHABLE (sock.setsockopt(274 /*SOL_BLUETOOTH*/, 8 /* BT_FLUSHABLE */, 1 /* flush */)) Frame 34: 13 bytes on wire (104 bits), 13 bytes captured (104 bits) Bluetooth HCI H4 Bluetooth HCI ACL Packet .... 0000 0000 0010 = Connection Handle: 0x0002 ..10 .... .... .... = PB Flag: First Automatically Flushable Packet (2) 00.. .... .... .... = BC Flag: Point-To-Point (0) Data Total Length: 8 Bluetooth L2CAP Packet Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-12-01Bluetooth: clean up legal textAndrei Emeltchenko
Remove extra spaces from legal text so that legal stuff looks the same for all bluetooth code. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-12-01Bluetooth: clean up l2cap codeAndrei Emeltchenko
Do not initialize static vars to zero, macros with complex values shall be enclosed with (), remove unneeded braces. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-09-23net: return operator cleanupEric Dumazet
Change "return (EXPR);" to "return EXPR;" return is not a function, parentheses are not required. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-10Bluetooth: Use 3-DH5 payload size for default ERTM max PDU sizeMat Martineau
The previous value of 672 for L2CAP_DEFAULT_MAX_PDU_SIZE is based on the default L2CAP MTU. That default MTU is calculated from the size of two DH5 packets, minus ACL and L2CAP b-frame header overhead. ERTM is used with newer basebands that typically support larger 3-DH5 packets, and i-frames and s-frames have more header overhead. With clean RF conditions, basebands will typically attempt to use 1021-byte 3-DH5 packets for maximum throughput. Adjusting for 2 bytes of ACL headers plus 10 bytes of worst-case L2CAP headers yields 1009 bytes of payload. This PDU size imposes less overhead for header bytes and gives the baseband the option to choose 3-DH5 packets, but is small enough for ERTM traffic to interleave well with other L2CAP or SCO data. 672-byte payloads do not allow the most efficient over-the-air packet choice, and cannot achieve maximum throughput over BR/EDR. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-08-10Bluetooth: Change default L2CAP ERTM retransmit timeoutMat Martineau
The L2CAP specification requires that the ERTM retransmit timeout be at least 2 seconds for BR/EDR connections. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Use __packed annotationGustavo F. Padovan
To make net/ and include/net/ code consistent use __packed instead of __attribute__ ((packed)). Bluetooth subsystem was one of the last net subsys still using __attribute__ ((packed)). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Add Google's copyright to L2CAPGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Add Copyright notice to L2CAPGustavo F. Padovan
Copyright for the time I worked on L2CAP during the Google Summer of Code program. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Remove the send_lock spinlock from ERTMGustavo F. Padovan
Using a lock to deal with the ERTM race condition - interruption with new data from the hci layer - is wrong. We should use the native skb backlog queue. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Disconnect early if mode is not supportedGustavo F. Padovan
When mode is mandatory we shall not send connect request and report this to the userspace as well. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Fix race condition on l2cap_ertm_send()Gustavo F. Padovan
l2cap_ertm_send() can be called both from user context and bottom half context. The socket locks for that contexts are different, the user context uses a mutex(which can sleep) and the second one uses a spinlock_bh. That creates a race condition when we have interruptions on both contexts at the same time. The better way to solve this is to add a new spinlock to lock l2cap_ertm_send() and the vars it access. The other solution was to defer l2cap_ertm_send() with a workqueue, but we the sending process already has one defer on the hci layer. It's not a good idea add another one. The patch refactor the code to create l2cap_retransmit_frames(), then we encapulate the lock of l2cap_ertm_send() for some call. It also changes l2cap_retransmit_frame() to l2cap_retransmit_one_frame() to avoid confusion Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Implement Local Busy Condition handlingGustavo F. Padovan
Supports Local Busy condition handling through a waitqueue that wake ups each 200ms and try to push the packets to the upper layer. If it can push all the queue then it leaves the Local Busy state. The patch modifies the behaviour of l2cap_ertm_reassembly_sdu() to support retry of the push operation. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Enable option to configure Max Transmission value via sockoptGustavo F. Padovan
With the sockopt extension we can set a per-channel MaxTx value. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Change acknowledgement to use the value of txWindowGustavo F. Padovan
Now that we can set the txWindow we need to change the acknowledgement procedure to ack after each (pi->txWindow/6 + 1). The plus 1 is to avoid the zero value. It also renames pi->num_to_ack to a better name: pi->num_acked. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Add sockopt configuration for txWindow on L2CAPGustavo F. Padovan
Now we can set/get Transmission Window size via sockopt. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Fix configuration of the MPS valueGustavo F. Padovan
We were accepting values bigger than we can accept. This was leading ERTM to drop packets because of wrong FCS checks. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Add timer to Acknowledge I-framesGustavo F. Padovan
We ack I-frames on each txWindow/5 I-frames received, but if the sender stop to send I-frames and it's not a txWindow multiple we can leave some frames unacked. So I added a timer to ack I-frames on this case. The timer expires in 200ms. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Implement 'Send IorRRorRNR' eventGustavo F. Padovan
After receive a RR with P bit set ERTM shall use this funcion to choose what type of frame to reply with F bit = 1. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03Bluetooth: Implement RejActioned flagGustavo F. Padovan
RejActioned is used to prevent retransmission when a entity is on the WAIT_F state, i.e., waiting for a frame with F-bit set due local busy condition or a expired retransmission timer. (When these two events raise they send a frame with the Poll bit set and enters in the WAIT_F state to wait for a frame with the Final bit set.) The local entity doesn't send I-frames(the data frames) until the receipt of a frame with F-bit set. When that happens it also set RejActioned to false. RejActioned is a mandatory feature of ERTM spec. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03Bluetooth: Fix sending ReqSeq on I-framesGustavo F. Padovan
As specified by ERTM spec an ERTM channel can acknowledge received I-frames(the data frames) by sending an I-frame with the proper ReqSeq value (i.e. ReqSeq is set to BufferSeq). Until now we aren't setting the ReqSeq value on I-frame control bits. That way we can save sending S-frames(Supervise frames) only to acknowledge receipt of I-frames. It is very helpful to the full-duplex channel. ReqSeq is the packet sequence number sent in an acknowledgement frame to acknowledge receipt of frames up to (ReqSeq - 1). BufferSeq controls the receiver buffer, it is used to delay acknowledgement of new frames to not cause buffer overflow. BufferSeq value is not increased until frames are pulled by reassembly function. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-26Bluetooth: Handle L2CAP case when the remote receiver is busyGustavo F. Padovan
Implement all issues related to RemoteBusy in the RECV state table. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22Bluetooth: Full support for receiving L2CAP SREJ framesGustavo F. Padovan
Support for receiving of SREJ frames as specified by the state table. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22Bluetooth: Add support for L2CAP SREJ exceptionGustavo F. Padovan
When L2CAP loses an I-frame we send a SREJ frame to the transmitter side requesting the lost packet. This patch implement all Recv I-frame events on SREJ_SENT state table except the ones that deal with SendRej (the REJ exception at receiver side is yet not implemented). Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22Bluetooth: Add support for FCS option to L2CAPGustavo F. Padovan
Implement CRC16 check for L2CAP packets. FCS is used by Streaming Mode and Enhanced Retransmission Mode and is a extra check for the packet content. Using CRC16 is the default, L2CAP won't use FCS only when both side send a "No FCS" request. Initially based on a patch from Nathan Holstein <nathan@lampreynetworks.com> Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22Bluetooth: Add support for Retransmission and Monitor TimersGustavo F. Padovan
L2CAP uses retransmission and monitor timers to inquiry the other side about unacked I-frames. After sending each I-frame we (re)start the retransmission timer. If it expires, we start a monitor timer that send a S-frame with P bit set and wait for S-frame with F bit set. If monitor timer expires, try again, at a maximum of L2CAP_DEFAULT_MAX_TX. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22Bluetooth: Initial support for retransmission of packets with REJ framesGustavo F. Padovan
When receiving an I-frame with unexpected txSeq, receiver side start the recovery procedure by sending a REJ S-frame to the transmitter side. So the transmitter can re-send the lost I-frame. This patch just adds a basic support for retransmission, it doesn't mean that ERTM now has full support for packet retransmission. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22Bluetooth: Add support for Segmentation and Reassembly of SDUsGustavo F. Padovan
ERTM should use Segmentation and Reassembly to break down a SDU in many PDUs on sending data to the other side. On sending packets we queue all 'segments' until end of segmentation and just the add them to the queue for sending. On receiving we create a new SKB with the SDU reassembled. Initially based on a patch from Nathan Holstein <nathan@lampreynetworks.com> Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22Bluetooth: Add initial support for ERTM packets transfersGustavo F. Padovan
This patch adds support for ERTM transfers, without retransmission, with txWindow up to 63 and with acknowledgement of packets received. Now the packets are queued before call l2cap_do_send(), so packets couldn't be sent at the time we call l2cap_sock_sendmsg(). They will be sent in an asynchronous way on later calls of l2cap_ertm_send(). Besides if an error occurs on calling l2cap_do_send() we disconnect the channel. Initially based on a patch from Nathan Holstein <nathan@lampreynetworks.com> Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22Bluetooth: Add configuration support for ERTM and Streaming modeGustavo F. Padovan
Add support to config_req and config_rsp to configure ERTM and Streaming mode. If the remote device specifies ERTM or Streaming mode, then the same mode is proposed. Otherwise ERTM or Basic mode is used. And in case of a state 2 device, the remote device should propose the same mode. If not, then the channel gets disconnected. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22Bluetooth: Allow setting of L2CAP ERTM via socket optionMarcel Holtmann
To enable Enhanced Retransmission mode it needs to be set via a socket option. A different mode can be set on a socket, but on listen() and connect() the mode is checked and ERTM is only allowed if it is enabled via the module parameter. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-06-08Bluetooth: Add basic constants for L2CAP ERTM support and use themMarcel Holtmann
This adds the basic constants required to add support for L2CAP Enhanced Retransmission feature. Based on a patch from Nathan Holstein <nathan@lampreynetworks.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 08:53:40 +0000