summaryrefslogtreecommitdiff
path: root/include/net/bluetooth/hci.h
AgeCommit message (Collapse)Author
2021-09-07Bluetooth: Allow querying of supported offload codecs over SCO socketKiran K
Add BT_CODEC option for getsockopt systemcall to get the details of offload codecs supported over SCO socket Signed-off-by: Kiran K <kiran.k@intel.com> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-09-07Bluetooth: Add support for Read Local Supported Codecs V2Kiran K
Use V2 version of read local supported command is controller supports snoop: > HCI Event: Command Complete (0x0e) plen 20 Read Local Supported Codecs V2 (0x04|0x000d) ncmd 1 Status: Success (0x00) Number of supported codecs: 7 Codec: u-law log (0x00) Logical Transport Type: 0x02 Codec supported over BR/EDR SCO and eSCO Codec: A-law log (0x01) Logical Transport Type: 0x02 Codec supported over BR/EDR SCO and eSCO Codec: CVSD (0x02) Logical Transport Type: 0x02 Codec supported over BR/EDR SCO and eSCO Codec: Transparent (0x03) Logical Transport Type: 0x02 Codec supported over BR/EDR SCO and eSCO Codec: Linear PCM (0x04) Logical Transport Type: 0x02 Codec supported over BR/EDR SCO and eSCO Codec: Reserved (0x08) Logical Transport Type: 0x03 Codec supported over BR/EDR ACL Codec supported over BR/EDR SCO and eSCO Codec: mSBC (0x05) Logical Transport Type: 0x03 Codec supported over BR/EDR ACL Codec supported over BR/EDR SCO and eSCO Number of vendor codecs: 0 ...... < HCI Command: Read Local Suppor.. (0x04|0x000e) plen 7 Codec: mSBC (0x05) Logical Transport Type: 0x00 Direction: Input (Host to Controller) (0x00) > HCI Event: Command Complete (0x0e) plen 12 Read Local Supported Codec Capabilities (0x04|0x000e) ncmd 1 Status: Success (0x00) Number of codec capabilities: 1 Capabilities #0: 00 00 11 15 02 33 Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com> Signed-off-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-09-07Bluetooth: Enumerate local supported codec and cache detailsKiran K
Move reading of supported local codecs into a separate init function, query codecs capabilities and cache the data Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com> Signed-off-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-08-30Bluetooth: Support the quality report eventsJoseph Hwang
This patch allows a user space process to enable/disable the quality report events dynamically through the set experimental feature mgmt interface. Since the quality report feature needs to invoke the callback function provided by the driver, i.e., hdev->set_quality_report, a valid controller index is required. Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Joseph Hwang <josephsih@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-06-26Bluetooth: Fix Set Extended (Scan Response) DataLuiz Augusto von Dentz
These command do have variable length and the length can go up to 251, so this changes the struct to not use a fixed size and then when creating the PDU only the actual length of the data send to the controller. Fixes: a0fb3726ba551 ("Bluetooth: Use Set ext adv/scan rsp data if controller supports") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language when filtering devicesArchie Pusaka
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: blacklist -> reject list whitelist -> accept list Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language in HCI LE featuresArchie Pusaka
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: master -> central slave -> peripheral Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language to describe CPBArchie Pusaka
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced when describing the connectionless peripheral broadcast feature: master -> central slave -> peripheral Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language in hci_core.hArchie Pusaka
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: master -> central slave -> peripheral These attributes are not used elsewhere in the code. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: Add ncmd=0 recovery handlingManish Mandlik
During command status or command complete event, the controller may set ncmd=0 indicating that it is not accepting any more commands. In such a case, host holds off sending any more commands to the controller. If the controller doesn't recover from such condition, host will wait forever, until the user decides that the Bluetooth is broken and may power cycles the Bluetooth. This patch triggers the hardware error to reset the controller and driver when it gets into such state as there is no other wat out. Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-03-03Bluetooth: Remove unneeded commands for suspendAbhishek Pandit-Subedi
During suspend, there are a few scan enable and set event filter commands that don't need to be sent unless there are actual BR/EDR devices capable of waking the system. Check the HCI_PSCAN bit before writing scan enable and use a new dev flag, HCI_EVENT_FILTER_CONFIGURED to control whether to clear the event filter. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-29Bluetooth: Add new HCI_QUIRK_NO_SUSPEND_NOTIFIER quirkHans de Goede
Some devices, e.g. the RTL8723BS bluetooth part, some USB attached devices, completely drop from the bus on a system-suspend. These devices will have their driver unbound and rebound on resume (when the dropping of the bus gets detected) and will show up as a new HCI after resume. These devices do not benefit from the suspend / resume handling work done by the hci_suspend_notifier. At best this unnecessarily adds some time to the suspend/resume time. But this may also actually cause problems, if the code doing the driver unbinding runs after the pm-notifier then the hci_suspend_notifier code will try to talk to a device which is now in an uninitialized state. This commit adds a new HCI_QUIRK_NO_SUSPEND_NOTIFIER quirk which allows drivers to opt-out of the hci_suspend_notifier when they know beforehand that their device will be fully re-initialized / reprobed on resume. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-12-07Bluetooth: Query LE tx power on startupDaniel Winkler
Queries tx power via HCI_LE_Read_Transmit_Power command when the hci device is initialized, and stores resulting min/max LE power in hdev struct. If command isn't available (< BT5 support), min/max values both default to HCI_TX_POWER_INVALID. This patch is manually verified by ensuring BT5 devices correctly query and receive controller tx power range. Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-07-30Bluetooth: Enable controller RPA resolution using Experimental featureSathish Narasimman
This patch adds support to enable the use of RPA Address resolution using expermental feature mgmt command. Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-30Bluetooth: Enable RPA TimeoutSathish Narasimman
Enable RPA timeout during bluetooth initialization. The RPA timeout value is used from hdev, which initialized from debug_fs Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-30Bluetooth: Translate additional address type correctlyMarcel Holtmann
When using controller based address resolution, then the new address types 0x02 and 0x03 are used. These types need to be converted back into either public address or random address types. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sathish Narsimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-28Bluetooth: btusb: Fix and detect most of the Chinese Bluetooth controllersIsmael Ferreras Morezuelas
For some reason they tend to squat on the very first CSR/ Cambridge Silicon Radio VID/PID instead of paying fees. This is an extremely common problem; the issue goes as back as 2013 and these devices are only getting more popular, even rebranded by reputable vendors and sold by retailers everywhere. So, at this point in time there are hundreds of modern dongles reusing the ID of what originally was an early Bluetooth 1.1 controller. Linux is the only place where they don't work due to spotty checks in our detection code. It only covered a minimum subset. So what's the big idea? Take advantage of the fact that all CSR chips report the same internal version as both the LMP sub-version and HCI revision number. It always matches, couple that with the manufacturer code, that rarely lies, and we now have a good idea of who is who. Additionally, by compiling a list of user-reported HCI/lsusb dumps, and searching around for legit CSR dongles in similar product ranges we can find what CSR BlueCore firmware supported which Bluetooth versions. That way we can narrow down ranges of fakes for each of them. e.g. Real CSR dongles with LMP subversion 0x73 are old enough that support BT 1.1 only; so it's a dead giveaway when some third-party BT 4.0 dongle reuses it. So, to sum things up; there are multiple classes of fake controllers reusing the same 0A12:0001 VID/PID. This has been broken for a while. Known 'fake' bcdDevices: 0x0100, 0x0134, 0x1915, 0x2520, 0x7558, 0x8891 IC markings on 0x7558: FR3191AHAL 749H15143 (???) https://bugzilla.kernel.org/show_bug.cgi?id=60824 Fixes: 81cac64ba258ae (Deal with USB devices that are faking CSR vendor) Reported-by: Michał Wiśniewski <brylozketrzyn@gmail.com> Tested-by: Mike Johnson <yuyuyak@gmail.com> Tested-by: Ricardo Rodrigues <ekatonb@gmail.com> Tested-by: M.Hanny Sabbagh <mhsabbagh@outlook.com> Tested-by: Oussama BEN BRAHIM <b.brahim.oussama@gmail.com> Tested-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com> Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-22Bluetooth: use configured params for ext advAlain Michaud
When the extended advertisement feature is enabled, a hardcoded min and max interval of 0x8000 is used. This patch fixes this issue by using the configured min/max value. This was validated by setting min/max in main.conf and making sure the right setting is applied: < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 #93 [hci0] 10.953011 … Min advertising interval: 181.250 msec (0x0122) Max advertising interval: 181.250 msec (0x0122) … Signed-off-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-11Bluetooth: Add support for experimental features configurationMarcel Holtmann
To enable platform specific experimental features, introduce this new set of management commands and events. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-28Bluetooth: Adding driver and quirk defs for multi-role LEAlain Michaud
This change adds the relevant driver and quirk to allow drivers to report the le_states as being trustworthy. This has historically been disabled as controllers did not reliably support this. In particular, this will be used to relax this condition for controllers that have been well tested and reliable. /* Most controller will fail if we try to create new connections * while we have an existing one in slave role. */ if (hdev->conn_hash.le_num_slave > 0) return NULL; Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-15Bluetooth: Enable LE Enhanced Connection Complete event.Marcel Holtmann
In case LL Privacy is supported by the controller, it is also a good idea to use the LE Enhanced Connection Complete event for getting all information about the new connection and its addresses. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-15Bluetooth: Sort list of LE features constantsMarcel Holtmann
The list of LE features constants has gotten a bit confused. It lost the order and gained duplicated. Clean this up. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-07Bluetooth: debugfs option to unset MITM flagArchie Pusaka
The BT qualification test SM/MAS/PKE/BV-01-C needs us to turn off the MITM flag when pairing, and at the same time also set the io capability to something other than no input no output. Currently the MITM flag is only unset when the io capability is set to no input no output, therefore the test cannot be executed. This patch introduces a debugfs option to force MITM flag to be turned off. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-05Bluetooth: Add HCI device identifier for VIRTIO devicesMarcel Holtmann
This patch assigns the next free HCI device identifier to Bluetooth devices based on VIRTIO devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-05Bluetooth: Add support for Read Local Simple Pairing OptionsMarcel Holtmann
With the Read Local Simple Pairing Options command it is possible to retrieve the support for max encryption key size supported by the controller and also if the controller correctly verifies the ECDH public key during pairing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-05Bluetooth: add support to notify using SCO air modeSathish Narsimman
notifying using HCI_NOTIFY_CONN_ADD for SCO connection is generic in case of mSBC audio. To differntiate SCO air mode introducing HCI_NOTIFY_ENABLE_SCO_CVSD and HCI_NOTIFY_ENABLE_SCO_TRANSP. Signed-off-by: Sathish Narsimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-03-11Bluetooth: Handle BR/EDR devices during suspendAbhishek Pandit-Subedi
To handle BR/EDR devices, we first disable page scan and disconnect all connected devices. Once that is complete, we add event filters (for devices that can wake the system) and re-enable page scan. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-08Bluetooth: Enable erroneous data reporting if WBS is supportedAlain Michaud
This change introduces a wide band speech setting which allows higher level clients to query the local controller support for wide band speech as well as set the setting state when the radio is powered off. Internally, this setting controls if erroneous data reporting is enabled on the controller. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-02-28Bluetooth: Support querying for WBS support through MGMTAlain Michaud
This patch provides a mechanism for MGMT interface client to query the capability of the controller to support WBS. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-02-28Bluetooth: Fixing a few comment typos in the quirk definitions.Alain Michaud
This change simply fixes a few typos in the quirk definitions. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-02-28Bluetooth: Remove adv set for directed advertisingSathish Narsimman
Extended advertising Data is set during bluetooth initialization by default which causes InvalidHCICommandParameters when setting Extended advertising parameters. As per Core Spec 5.2 Vol 2, PART E, Sec 7.8.53, for advertising_event_property LE_LEGACY_ADV_DIRECT_IND does not supports advertising data when the advertising set already contains some, the controller shall return erroc code 'InvalidHCICommandParameters(0x12). So it is required to remove adv set for handle 0x00. since we use instance 0 for directed adv. Signed-off-by: Sathish Narsimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-02-28Bluetooth: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-01-15Bluetooth: Add definitions for CIS connectionsLuiz Augusto von Dentz
These adds the HCI definitions for handling CIS connections along with ISO data packets. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-01-04Bluetooth: Add support for LE PHY Update Complete eventLuiz Augusto von Dentz
This handles LE PHY Update Complete event and store both tx_phy and rx_phy into hci_conn. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: Add support for LE ping featureSpoorthi Ravishankar Koppad
Changes made to add HCI Write Authenticated Payload timeout command for LE Ping feature. As per the Core Specification 5.0 Volume 2 Part E Section 7.3.94, the following code changes implements HCI Write Authenticated Payload timeout command for LE Ping feature. Signed-off-by: Spoorthi Ravishankar Koppad <spoorthix.k@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-05-05Bluetooth: Ignore CC events not matching the last HCI commandJoão Paulo Rechi Vita
This commit makes the kernel not send the next queued HCI command until a command complete arrives for the last HCI command sent to the controller. This change avoids a problem with some buggy controllers (seen on two SKUs of QCA9377) that send an extra command complete event for the previous command after the kernel had already sent a new HCI command to the controller. The problem was reproduced when starting an active scanning procedure, where an extra command complete event arrives for the LE_SET_RANDOM_ADDR command. When this happends the kernel ends up not processing the command complete for the following commmand, LE_SET_SCAN_PARAM, and ultimately behaving as if a passive scanning procedure was being performed, when in fact controller is performing an active scanning procedure. This makes it impossible to discover BLE devices as no device found events are sent to userspace. This problem is reproducible on 100% of the attempts on the affected controllers. The extra command complete event can be seen at timestamp 27.420131 on the btmon logs bellow. Bluetooth monitor ver 5.50 = Note: Linux version 5.0.0+ (x86_64) 0.352340 = Note: Bluetooth subsystem version 2.22 0.352343 = New Index: 80:C5:F2:8F:87:84 (Primary,USB,hci0) [hci0] 0.352344 = Open Index: 80:C5:F2:8F:87:84 [hci0] 0.352345 = Index Info: 80:C5:F2:8F:87:84 (Qualcomm) [hci0] 0.352346 @ MGMT Open: bluetoothd (privileged) version 1.14 {0x0001} 0.352347 @ MGMT Open: btmon (privileged) version 1.14 {0x0002} 0.352366 @ MGMT Open: btmgmt (privileged) version 1.14 {0x0003} 27.302164 @ MGMT Command: Start Discovery (0x0023) plen 1 {0x0003} [hci0] 27.302310 Address type: 0x06 LE Public LE Random < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #1 [hci0] 27.302496 Address: 15:60:F2:91:B2:24 (Non-Resolvable) > HCI Event: Command Complete (0x0e) plen 4 #2 [hci0] 27.419117 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #3 [hci0] 27.419244 Type: Active (0x01) Interval: 11.250 msec (0x0012) Window: 11.250 msec (0x0012) Own address type: Random (0x01) Filter policy: Accept all advertisement (0x00) > HCI Event: Command Complete (0x0e) plen 4 #4 [hci0] 27.420131 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #5 [hci0] 27.420259 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #6 [hci0] 27.420969 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) > HCI Event: Command Complete (0x0e) plen 4 #7 [hci0] 27.421983 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 4 {0x0003} [hci0] 27.422059 Start Discovery (0x0023) plen 1 Status: Success (0x00) Address type: 0x06 LE Public LE Random @ MGMT Event: Discovering (0x0013) plen 2 {0x0003} [hci0] 27.422067 Address type: 0x06 LE Public LE Random Discovery: Enabled (0x01) @ MGMT Event: Discovering (0x0013) plen 2 {0x0002} [hci0] 27.422067 Address type: 0x06 LE Public LE Random Discovery: Enabled (0x01) @ MGMT Event: Discovering (0x0013) plen 2 {0x0001} [hci0] 27.422067 Address type: 0x06 LE Public LE Random Discovery: Enabled (0x01) Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-26Bluetooth: Add quirk for reading BD_ADDR from fwnode propertyMatthias Kaehlcke
Add HCI_QUIRK_USE_BDADDR_PROPERTY to allow controllers to retrieve the public Bluetooth address from the firmware node property 'local-bd-address'. If quirk is set and the property does not exist or is invalid the controller is marked as unconfigured. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Tested-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: Add definitions and track LE resolve list modificationAnkit Navik
Add the definitions for adding entries to the LE resolve list and removing entries from the LE resolve list. When the LE resolve list gets changed via HCI commands make sure that the internal storage of the resolve list entries gets updated. Signed-off-by: Ankit Navik <ankit.p.navik@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-10Bluetooth: Add definitions for LE set address resolutionAnkit Navik
Add the definitions for LE address resolution enable HCI commands. When the LE address resolution enable gets changed via HCI commands make sure that flag gets updated. Signed-off-by: Ankit Navik <ankit.p.navik@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-06Bluetooth: btqca: Introduce HCI_EV_VENDOR and use itMarcel Holtmann
Using HCI_VENDOR_PKT for vendor specific events does work since it has also the value 0xff, but it is actually the packet type indicator constant and not the event constant. So introduce HCI_EV_VENDOR and use it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2018-07-30Bluetooth: Add new quirk for non-persistent setup settingsSean Wang
Add a new quirk HCI_QUIRK_NON_PERSISTENT_SETUP allowing that a quirk that runs setup() after every open() and not just after the first open(). Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Implement secondary advertising on different PHYsJaganath Kanakkassery
This patch adds support for advertising in primary and secondary channel on different PHYs. User can add the phy preference in the flag based on which phy type will be added in extended advertising parameter would be set. @ MGMT Command: Add Advertising (0x003e) plen 11 Instance: 1 Flags: 0x00000200 Advertise in CODED on Secondary channel Duration: 0 Timeout: 0 Advertising data length: 0 Scan response length: 0 < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 2 Extended advertising: Disabled (0x00) Number of sets: Disable all sets (0x00) > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0000 Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE Coded (0x03) Secondary max skip: 0x00 Secondary PHY: LE Coded (0x03) SID: 0x00 Scan request notifications: Disabled (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Handle ADv set terminated eventJaganath Kanakkassery
This event comes after connection complete event for incoming connections. Since we now have different random address for each instance, conn resp address is assigned from this event. As of now only connection part is handled as we are not enabling duration or max num of events while starting ext adv. Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Implement Set ADV set random addressJaganath Kanakkassery
This basically sets the random address for the adv instance Random address can be set only if the instance is created which is done in Set ext adv param. Random address and rpa expire timer and flags have been added to adv instance which will be used when the respective instance is scheduled. This introduces a hci_get_random_address() which returns the own address type and random address (rpa or nrpa) based on the instance flags and hdev flags. New function is required since own address type should be known before setting adv params but address can be set only after setting params. < HCI Command: LE Set Advertising Set Random Address (0x08|0x0035) plen 7 Advertising handle: 0x00 Advertising random address: 3C:8E:56:9B:77:84 (OUI 3C-8E-56) > HCI Event: Command Complete (0x0e) plen 4 LE Set Advertising Set Random Address (0x08|0x0035) ncmd 1 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Implement disable and removal of adv instanceJaganath Kanakkassery
If ext adv is enabled then use ext adv to disable as well. Also remove the adv set during LE disable. < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 2 Extended advertising: Disabled (0x00) Number of sets: Disable all sets (0x00) > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Use Set ext adv/scan rsp data if controller supportsJaganath Kanakkassery
This patch implements Set Ext Adv data and Set Ext Scan rsp data if controller support extended advertising. Currently the operation is set as Complete data and fragment preference is set as no fragment < HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 35 Handle: 0x00 Operation: Complete extended advertising data (0x03) Fragment preference: Minimize fragmentation (0x01) Data length: 0x15 16-bit Service UUIDs (complete): 2 entries Heart Rate (0x180d) Battery Service (0x180f) Name (complete): Test LE Company: Google (224) Data: 0102 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Data (0x08|0x0037) ncmd 1 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Impmlement extended adv enableJaganath Kanakkassery
This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Read no of adv sets during initJaganath Kanakkassery
This patch reads the number of advertising sets in the controller during init and save it in hdev. Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Handle extended ADV PDU typesJaganath Kanakkassery
This patch defines the extended ADV types and handle it in ADV report. Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Set Scan PHYs based on selected PHYs by userJaganath Kanakkassery
Use the PHYs selected in Set Phy Configuration management command while scanning. < HCI Command: LE Set Extended Scan Parameters (0x08|0x0041) plen 13 Own address type: Random (0x01) Filter policy: Accept all advertisement (0x00) PHYs: 0x05 Entry 0: LE 1M Type: Active (0x01) Interval: 11.250 msec (0x0012) Window: 11.250 msec (0x0012) Entry 1: LE Coded Type: Active (0x01) Interval: 11.250 msec (0x0012) Window: 11.250 msec (0x0012) > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Scan Enable (0x08|0x0042) plen 6 Extended scan: Enabled (0x01) Filter duplicates: Enabled (0x01) Duration: 0 msec (0x0000) Period: 0.00 sec (0x0000) > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 05:16:01 +0000