| Age | Commit message (Collapse) | Author |
|---|
|
Add missing timer clock definitions for BCM63268.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230322171515.120353-2-noltari@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The Loongson-2 boot clock was used to spi and lio peripheral and
this patch was to add boot clock index number.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230323025229.2971-1-zhuyinbo@loongson.cn
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add devicetree binding document and related header file
for the Loongson-1 clock.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230321111817.71756-2-keguang.zhang@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Adds device tree configuration for cs35l45 GPIOs
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230315154722.3911463-1-vkarpovi@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For convenience (less code duplication), the pin controller pin
configuration register values were defined in the bindings header.
These are not some IDs or other abstraction layer but raw numbers used
in the registers.
These constants do not fit the purpose of bindings. They do not
provide any abstraction, any hardware and driver independent ID. In
fact, the Linux pinctrl-single driver actually do not use the bindings
header at all.
All of the constants were moved already to headers local to DTS
(residing in DTS directory), so remove any references to the bindings
header and add a warning that it is deprecated.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/linux-arm-kernel/71c7feff-4189-f12f-7353-bce41a61119d@linaro.org/
Link: https://lore.kernel.org/r/20230315155228.1566883-4-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Merge MSM8917 Global Clock Controller and RPM clock controller bindings
through topic branch, to make it possible to introduce in Devicetree
source depending on these.
|
|
Add a device tree binding to describe clocks, resets and power domains
provided by the global clock controller on MSM8917 SoCs and the very
similar QM215 SoCs.
Add the new compatibles to qcom,gcc-msm8909.yaml. There is
no need to create another YAML file because the bindings are identical
(MSM8917 GCC requires the same parent clocks as the MSM8909 GCC).
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230223180935.60546-2-otto.pflueger@abscue.de
|
|
Merge the IPQ5332 Global Clock Controller binding through a topic branch
to make it possible to include in Devicetree source as well.
|
|
Add binding for the Qualcomm IPQ5332 Global Clock Controller.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230307062232.4889-4-quic_kathirav@quicinc.com
|
|
Add the ID for the Qualcomm SM7150 SoC.
Signed-off-by: David Wronek <davidwronek@gmail.com>
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230305191745.386862-2-danila@jiaxyga.com
|
|
Add the ID for QRB4210 variant.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230315160151.2166861-2-bhupesh.sharma@linaro.org
|
|
Add SOC ID for Qualcomm IPQ9574, IPQ9570, IPQ9554, IPQ9550,
IPQ9514 and IPQ9510
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1678774414-14414-2-git-send-email-quic_varada@quicinc.com
|
|
Add the missing IDs for scuba and its QRB variant.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314-topic-scuba_socinfo-v2-1-44fa1256aa6d@linaro.org
|
|
Merge SM7180 Global Clock Controller binding through a dedicated topic
branch, so that it can be introduced into the Devicetree source tree as
well in the same kernel release.
|
|
Add device tree bindings for global clock subsystem clock
controller for Qualcomm Technology Inc's SM7150 SoCs.
Co-developed-by: David Wronek <davidwronek@gmail.com>
Signed-off-by: David Wronek <davidwronek@gmail.com>
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213165318.127160-2-danila@jiaxyga.com
|
|
Add the SoC ID entry for SA8775P.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Eric Chanudet <echanude@redhat.com>
Tested-by: Eric Chanudet <echanude@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209095753.447347-3-brgl@bgdev.pl
|
|
Add device tree bindings for graphics clock controller for Qualcomm
Technology Inc's SM6115 SoCs.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208091340.124641-10-konrad.dybcio@linaro.org
|
|
Add device tree bindings for graphics clock controller for Qualcomm
Technology Inc's SM6375 SoCs.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208091340.124641-8-konrad.dybcio@linaro.org
|
|
Add device tree bindings for graphics clock controller for Qualcomm
Technology Inc's SM6125 SoCs.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208091340.124641-6-konrad.dybcio@linaro.org
|
|
R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds. These become a maintenance
burden now, so our development group decided to remove upstream support
and disable booting for this SoC. Public users only have ES2 onwards.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230307105645.5285-5-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The current "not part of a gate" is a little ambiguous. Expand this a
little to clarify the reference to the paired clock + reset control.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20230302005834.13171-7-jk@codeconstruct.com.au
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The current ast2600 clock definitions include entries for i3c6 and i3c7
devices, which don't exist: there are no clock control lines documented
for these, and only i3c devices 0 through 5 are present.
So, remove the definitions for I3C6 and I3C7. Although this is a
potential ABI-breaking change, there are no in-tree users of these, and
any references would be broken anyway, as the hardware doesn't exist.
This is a partial cherry-pick and rework of ed44b8cdfdb and 1a35eb926d7
from Aspeed's own tree, originally by Dylan Hung
<dylan_hung@aspeedtech.com>.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20230302005834.13171-5-jk@codeconstruct.com.au
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The ast2600 hardware has a top-level clock for all i3c controller
peripherals (then gated to each individual controller), so add a
top-level i3c clock line to control this.
This is a partial cherry-pick and rework of ed44b8cdfdb and 1a35eb926d7
from Aspeed's own tree, originally by Dylan Hung
<dylan_hung@aspeedtech.com>.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20230302005834.13171-3-jk@codeconstruct.com.au
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add main gate clocks for controlling AUD and HSI CMUs:
- gout_aud_cmu_aud_pclk
- gout_hsi_cmu_hsi_pclk
While at it, add missing PPMU (Performance Profiling Monitor Unit)
clocks for CMU_HSI.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20230223042133.26551-3-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
CMU_G3D generates Gondul GPU and bus clocks for BLK_G3D.
Add clock indices and binding documentation for CMU_G3D.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20230223042133.26551-2-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add support for the time slot assigner (TSA)
available in some PowerQUICC SoC such as MPC885
or MPC866.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230217145645.1768659-2-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We have one small patch to the clk core this time around. It fixes a
corner case with the CLK_OPS_PARENT_ENABLE flag combined with
clk_core_is_enabled() where it hangs the system. We'll simply assume
the clk is disabled if the parent is disabled and the flag is set.
Trying to turn on the parent to check the enable state of the clk runs
into system hangs at boot. We let this bake in -next for a couple
weeks to make sure there aren't any more issues because the last
attempt to fix this ran into hangs and had to be reverted.
Note: There were some more patches to the core framework around
sync_state and disabling unused clks, but I asked for that to be
reverted from the qcom PR because it isn't ready and we're still
discussing the best solution on the list.
Outside of the core clk framework, we have the usual collection of clk
driver updates and support for new SoCs (which seems to never stop).
The dirstat is dominated by Qualcomm because they added support for
quite a few SoCs this time around and also migrated quite a few of
their drivers to clk_parent_data. The other big diff is in the
Mediatek clk drivers that saw a significant rework this cycle to
similarly modernize the code, and we'll see that work continue in the
next cycle as well. Nothing really jumps out as scary here, except
that the significant churn in parent data descriptions can have typos
that go unnoticed. More details below.
Core:
- Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
New Drivers:
- Add a new clk-gpr-mux clock type and use it on i.MX6Q to add ENET
ref clocks
- Support for Mediatek MT7891 SoC clks
- Support for many Qualcomm clk controllers:
- QDU1000/QRU1000 global clock controller
- SA8775P global clock controller
- SM8550 TCSR and display clock controller
- SM6350 clock controller
- MSM8996 CBF and APCS clock controllers
Updates:
- Various cleanups and improvements to Mediatek clk drivers to reduce
code size and modernize the drivers
- Support for Versa 5P49V60 clks
- Disable R-Car H3 ES1.*, as it was only available to an internal
development group and needed a lot of quirks and workarounds
- Add PWM, Compare-Match Timer (TIM), USB, SDHI, and eMMC clocks and
resets on Renesas RZ/V2M
- Add display clocks on Renesas R-Car V4H
- Add Camera Receiving Unit (CRU) clocks and resets on Renesas RZ/G2L
- Free the imx_uart_clocks even if imx_register_uart_clocks returns
early
- Get the stdout clocks count from device tree on i.MX
- Drop the clock count argument from imx_register_uart_clocks()
- Keep the uart clocks on i.MX93 for when earlycon is used
- Fix SPDX comment in i.MX6SLL clocks bindings header
- Drop some unnecessary spaces from i.MX8ULP clocks bindings header
- Add imx_obtain_fixed_of_clock() for allowing to add a clock that is
not configured via devicetree
- Fix the ENET1 gate configuration for i.MX6UL according to the
reference manual
- Add ENET refclock mux support for i.MX6UL
- Add support for USB host/device configuration on Renesas RZ/N1
- Add PLL2 programming support, and CAN-FD clocks on Renesas R-Car
V4H
- Add D1 CAN bus gates and resets for Allwinner
- Mark D1 CPUX clock as critical on Allwinner
- Reuse D1 driver for Allwinner R528/T113
- Cleanup sunxi-ng Kconfig
- Fix sunxi-ng kernel-doc issues
- Model Allwinner H3/H5 DRAM clock as fixed clock
- Use .determine_rate() instead of .round_rate() for the dualdiv,
mpll, sclk-div and cpu-dyn-div amlogic clock drivers
- DDR clocks were marked as critical in the proper clock driver for
each AT91 SoC such that drivers/memory/atmel-sdramc.c to be deleted
in the next releases as it only does clock enablement
- Patch to avoid compiling dt-compat.o for all AT91 SoCs as only some
of them may use it
- Support synchronous power_off requests in the qcom GDSC driver for
proper GPU power collapse
- Drop test clocks from various Qualcomm clk drivers
- Update parent references to use clk_parent_data/clk_hw in various
Qualcomm clk drivers
- Fixes for the Qualcomm MSM8996 CPU clock controller
- Transition Qualcomm MSM8974 GCC off the externally defined
sleep_clk
- Add GDSCs in the global clock controller for Qualcomm QCS404
- The SDCC core clocks on Qualcomm SM6115 are moved to floor_ops
- Programming of clk_dis_wait for GPU CX GDSC on Qualcomm SC7180 and
SDM845 are moved to use the recently introduced properties in the
GDSC struct
- Qualcomm's RPMh clock driver gains SM8550 and SA8775P clocks, and
the IPA clock is added on a variety of platforms
- De-duplicate identical clks in Qualcomm SMD RPM clk driver
- Add a few missing clocks across msm8998, msm8992, msm8916, qcs404
to Qualcomm SDM RPM clk driver
- Various Qualcomm clk drivers use devm_pm_runtime_enable() to
simplify"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (228 commits)
clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP
clk: qcom: Revert sync_state based clk_disable_unused
clk: imx: pll14xx: fix recalc_rate for negative kdiv
clk: rs9: Drop unused pin_xin field
MAINTAINERS: clk: imx: Add Peng Fan as reviewer
clk: sprd: Add dependency for SPRD_UMS512_CLK
clk: ralink: fix 'mt7621_gate_is_enabled()' function
clk: mediatek: clk-mtk: Remove unneeded semicolon
dt-bindings: clock: remove stih416 bindings
dt-bindings: clock: add loongson-2 clock
dt-bindings: clock: add loongson-2 clock include file
clk: imx: fix compile testing imxrt1050
clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static
clk: renesas: rcar-gen3: Disable R-Car H3 ES1.*
dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC
clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC
dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property
clk: qcom: cpu-8996: add missing cputype include
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add node lifecycle unit tests
- Add of_property_present() helper aligned with fwnode API
- Print more information on reserved regions on boot
- Update dtc to upstream v1.6.1-66-gabbd523bae6e
- Use strscpy() to instead of strncpy() in DT core
- Add option for schema validation on %.dtb targets
Bindings:
- Add/fix support for listing multiple patterns in DT_SCHEMA_FILES
- Rework external memory controller/bus bindings to properly support
controller specific child node properties
- Convert loongson,ls1x-intc, fcs,fusb302, sil,sii8620, Rockchip
RK3399 PCIe, Synquacer I2C, and Synquacer EXIU bindings to DT
schema format
- Add RiscV SBI PMU event mapping binding
- Add missing contraints on Arm SCMI child node allowed properties
- Add a bunch of missing Socionext UniPhier glue block bindings and
example fixes
- Various fixes for duplicate or conflicting type definitions on DT
properties"
* tag 'devicetree-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits)
dt-bindings: regulator: Add mps,mpq7932 power-management IC
of: dynamic: Fix spelling mistake "kojbect" -> "kobject"
dt-bindings: drop Sagar Kadam from SiFive binding maintainership
dt-bindings: sram: qcom,imem: document sm8450
dt-bindings: interrupt-controller: convert loongson,ls1x-intc.txt to json-schema
dt-bindings: arm: Add Cortex-A715 and X3
of: dynamic: add lifecycle docbook info to node creation functions
of: add consistency check to of_node_release()
of: do not use "%pOF" printk format on node with refcount of zero
of: unittest: add node lifecycle tests
of: update kconfig unittest help
of: add processing of EXPECT_NOT to of_unittest_expect
of: prepare to add processing of EXPECT_NOT to of_unittest_expect
of: Use preferred of_property_read_* functions
of: Use of_property_present() helper
of: Add of_property_present() helper
of: reserved_mem: Use proper binary prefix
dt-bindings: Fix multi pattern support in DT_SCHEMA_FILES
of: reserved-mem: print out reserved-mem details during boot
dt-bindings: serial: restrict possible child node names
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the large set of driver changes for char/misc drivers and
other smaller driver subsystems that flow through this git tree.
Included in here are:
- New IIO drivers and features and improvments in that subsystem
- New hwtracing drivers and additions to that subsystem
- lots of interconnect changes and new drivers as that subsystem
seems under very active development recently. This required also
merging in the icc subsystem changes through this tree.
- FPGA driver updates
- counter subsystem and driver updates
- MHI driver updates
- nvmem driver updates
- documentation updates
- Other smaller driver updates and fixes, full details in the
shortlog
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits)
scripts/tags.sh: fix incompatibility with PCRE2
firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries
mei: lower the log level for non-fatal failed messages
mei: bus: disallow driver match while dismantling device
misc: vmw_balloon: fix memory leak with using debugfs_lookup()
nvmem: stm32: fix OPTEE dependency
dt-bindings: nvmem: qfprom: add IPQ8074 compatible
nvmem: qcom-spmi-sdam: register at device init time
nvmem: rave-sp-eeprm: fix kernel-doc bad line warning
nvmem: stm32: detect bsec pta presence for STM32MP15x
nvmem: stm32: add OP-TEE support for STM32MP13x
nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of()
nvmem: core: add nvmem_add_one_cell()
nvmem: core: drop the removal of the cells in nvmem_add_cells()
nvmem: core: move struct nvmem_cell_info to nvmem-provider.h
nvmem: core: add an index parameter to the cell
of: property: add #nvmem-cell-cells property
of: property: make #.*-cells optional for simple props
of: base: add of_parse_phandle_with_optional_args()
net: add helper eth_addr_add()
...
|
|
* clk-loongson:
dt-bindings: clock: add loongson-2 clock
dt-bindings: clock: add loongson-2 clock include file
* clk-qcom: (143 commits)
clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP
clk: qcom: Revert sync_state based clk_disable_unused
dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC
clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC
dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property
clk: qcom: cpu-8996: add missing cputype include
clk: qcom: gcc-sa8775p: remove unused variables
clk: qcom: smd-rpm: provide RPM_SMD_XO_CLK_SRC on MSM8996 platform
clk: qcom: add msm8996 Core Bus Framework (CBF) support
dt-bindings: clock: qcom,msm8996-cbf: Describe the MSM8996 CBF clock controller
clk: qcom: add the driver for the MSM8996 APCS clocks
clk: qcom: gcc-qcs404: fix duplicate initializer warning
clk: qcom: cpu-8996: change setup sequence to follow vendor kernel
clk: qcom: cpu-8996: fix PLL clock ops
clk: qcom: cpu-8996: fix ACD initialization
clk: qcom: cpu-8996: fix PLL configuration sequence
clk: qcom: cpu-8996: move qcom_cpu_clk_msm8996_acd_init call
clk: qcom: cpu-8996: setup PLLs before registering clocks
clk: qcom: cpu-8996: simplify the cpu_clk_notifier_cb
...
|
|
and 'clk-core' into clk-next
- Various cleanups and improvements to Mediatek clk drivers to reduce
code size and modernize the drivers
- Support for Mediatek MT7891 SoC clks
* clk-microchip:
clk: at91: do not compile dt-compat.c for sama7g5 and sam9x60
clk: at91: mark ddr clocks as critical
* clk-allwinner:
clk: sunxi-ng: d1: Add CAN bus gates and resets
dt-bindings: clock: Add D1 CAN bus gates and resets
clk: sunxi-ng: d1: Mark cpux clock as critical
clk: sunxi-ng: d1: Allow building for R528/T113
clk: sunxi-ng: Move SoC driver conditions to dependencies
clk: sunxi-ng: Remove duplicate ARCH_SUNXI dependencies
clk: sunxi-ng: Avoid computing the rate twice
clk: sunxi-ng: h3/h5: Model H3 CLK_DRAM as a fixed clock
clk: sunxi-ng: fix ccu_mmc_timing.c kernel-doc issues
* clk-mediatek: (29 commits)
clk: mediatek: clk-mtk: Remove unneeded semicolon
clk: mediatek: remove MT8195 vppsys/0/1 simple_probe
dt-bindings: arm: mediatek: migrate MT8195 vppsys0/1 to mtk-mmsys driver
clk: mediatek: add MT7981 clock support
dt-bindings: clock: mediatek: add mt7981 clock IDs
dt-bindings: clock: Add compatibles for MT7981
clk: mediatek: clk-mt7986-topckgen: Migrate to mtk_clk_simple_probe()
clk: mediatek: clk-mt7986-topckgen: Properly keep some clocks enabled
clk: mediatek: clk-mt6795-topckgen: Migrate to mtk_clk_simple_probe()
clk: mediatek: clk-mt8186-topckgen: Migrate to mtk_clk_simple_probe()
clk: mediatek: clk-mt8192: Migrate topckgen to mtk_clk_simple_probe()
clk: mediatek: clk-mtk: Register MFG notifier in mtk_clk_simple_probe()
clk: mediatek: clk-mt8183: Join top_aud_muxes and top_aud_divs
clk: mediatek: mt8186: Join top_adj_div and top_muxes
clk: mediatek: mt8192: Join top_adj_divs and top_muxes
clk: mediatek: clk-mt8192: Move CLK_TOP_CSW_F26M_D2 in top_divs
clk: mediatek: mt8173: Migrate pericfg/topckgen to mtk_clk_simple_probe()
clk: mediatek: clk-mtk: Extend mtk_clk_simple_probe()
clk: mediatek: Switch to mtk_clk_simple_probe() where possible
clk: mediatek: mt8173: Break down clock drivers and allow module build
...
* clk-imx:
clk: imx: pll14xx: fix recalc_rate for negative kdiv
MAINTAINERS: clk: imx: Add Peng Fan as reviewer
clk: imx: fix compile testing imxrt1050
clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static
clk: imx6ul: add ethernet refclock mux support
clk: imx6ul: fix enet1 gate configuration
clk: imx: add imx_obtain_fixed_of_clock()
clk: imx6q: add ethernet refclock mux support
clk: imx: add clk-gpr-mux driver
dt-bindings: imx8ulp: clock: no spaces before tabs
clk: imx6sll: add proper spdx license identifier
clk: imx: imx93: invoke imx_register_uart_clocks
clk: imx: remove clk_count of imx_register_uart_clocks
clk: imx: get stdout clk count from device tree
clk: imx: avoid memory leak
* clk-core:
clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Nothing special, notably a lot of new Qualcomm hardware is supported,
a RISC-V reference SoC and then some cleanups both in code and device
tree bindings.
Core changes:
- Add PINCTRL_PINFUNCTION() macro and use it in several drivers
New drivers:
- New driver for the StarFive JH7110 SoC "sys" and "aon" (always-on)
pin controllers. (RISC-V.)
- New subdriver for the Qualcomm QDU1000/QRU1000 SoC pin controller
- New subdrivers for the Qualcomm SM8550 SoC and LPASS pin
controllers
- New subdriver for the Qualcomm SA8775P SoC pin controller
- New subdriver for the Qualcomm IPQ5332 SoC pin controller
- New (trivial) support for Qualcomm PM8550 and PMR735D PMIC pin
control
- New subdriver for the Mediatek MT7981 SoC pin controller
Improvements:
- Several cleanups and refactorings to the Intel drivers
- Add 4KOhm bias support to the Intel driver
- Use the NOIRQ_SYSTEM_SLEEP_PM_OPS for the AT91 driver
- Support general purpose clocks in the Qualcomm MSM8226 SoC
- Several conversions to use the new I2C .probe_new() call
- Massive clean-up of the Qualcomm Device Tree YAML schemas
- Add VIN[45] pins, groups and functions to the Renesas r8a77950 SoC
driver"
* tag 'pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (118 commits)
pinctrl: qcom: Add support for i2c specific pull feature
pinctrl: starfive: Add StarFive JH7110 aon controller driver
pinctrl: starfive: Add StarFive JH7110 sys controller driver
dt-bindings: pinctrl: Add StarFive JH7110 aon pinctrl
dt-bindings: pinctrl: Add StarFive JH7110 sys pinctrl
pinctrl: add mt7981 pinctrl driver
dt-bindings: pinctrl: add bindings for MT7981 SoC
dt-bindings: pinctrl: rockchip,pinctrl: mark gpio sub nodes of pinctrl as deprecated
pinctrl: qcom: Introduce IPQ5332 TLMM driver
dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
dt-bindings: pinctrl: qcom: lpass-lpi: correct GPIO name pattern
pinctrl: qcom: pinctrl-sm8550-lpass-lpi: add SM8550 LPASS
dt-bindings: pinctrl: qcom,sm8550-lpass-lpi-pinctrl: add SM8550 LPASS
pinctrl: at91: use devm_kasprintf() to avoid potential leaks
dt-bindings: pinctrl: qcom: correct gpio-ranges in examples
dt-bindings: pinctrl: qcom,msm8994: correct number of GPIOs
dt-bindings: pinctrl: qcom,sdx55: correct GPIO name pattern
dt-bindings: pinctrl: qcom,msm8953: correct GPIO name pattern
dt-bindings: pinctrl: qcom,sm6375: correct GPIO name pattern and example
dt-bindings: pinctrl: qcom,msm8909: correct GPIO name pattern and example
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"The majority of changes here are related to the general switch-over to
using arrays of generic trip point structures registered along with a
thermal zone instead of trip point callbacks (this has been done
mostly by Daniel Lezcano with some help from yours truly on the Intel
drivers front).
Apart from that and the related reorganization of code, there are some
enhancements of the existing driver and a new Mediatek Low Voltage
Thermal Sensor (LVTS) driver. The Intel powerclamp undergoes a major
rework so it will use the generic idle_inject facility for CPU idle
time injection going forward and it will take additional module
parameters for specifying the subset of CPUs to be affected by it
(work done by Srinivas Pandruvada).
Also included are assorted fixes and a whole bunch of cleanups.
Specifics:
- Rework a large bunch of drivers to use the generic thermal trip
structure and use the opportunity to do more cleanups by removing
unused functions from the OF code (Daniel Lezcano)
- Remove core header inclusion from drivers (Daniel Lezcano)
- Fix some locking issues related to the generic thermal trip rework
(Johan Hovold)
- Fix a crash when requesting the critical temperature on tegra,
which is related to the generic trip point work (Jon Hunter)
- Clean up thermal device unregistration code (Viresh Kumar)
- Fix and clean up thermal control core initialization error code
paths (Daniel Lezcano)
- Relocate the trip points handling code into a separate file (Daniel
Lezcano)
- Make the thermal core fail registration of thermal zones and
cooling devices if the thermal class has not been registered
(Rafael Wysocki)
- Add trip point initialization helper functions for ACPI-defined
trip points and modify two thermal drivers to use them (Rafael
Wysocki, Daniel Lezcano)
- Make the core thermal control code use sysfs_emit_at() instead of
scnprintf() where applicable (ye xingchen)
- Consolidate code accessing the Intel TCC (Thermal Control
Circuitry) MSRs by introducing library functions for that and
making the TCC-related code in thermal drivers use them (Zhang Rui)
- Enhance the x86_pkg_temp_thermal driver to support dynamic tjmax
changes (Zhang Rui)
- Address an "unsigned expression compared with zero" warning in the
intel_soc_dts_iosf thermal driver (Yang Li)
- Update comments regarding two functions in the Intel Menlow thermal
driver (Deming Wang)
- Use sysfs_emit_at() instead of scnprintf() in the int340x thermal
driver (ye xingchen)
- Make the intel_pch thermal driver support the Wellsburg PCH (Tim
Zimmermann)
- Modify the intel_pch and processor_thermal_device_pci thermal
drivers use generic trip point tables instead of thermal zone trip
point callbacks (Daniel Lezcano)
- Add production mode attribute sysfs attribute to the int340x
thermal driver (Srinivas Pandruvada)
- Rework dynamic trip point updates handling and locking in the
int340x thermal driver (Rafael Wysocki)
- Make the int340x thermal driver use a generic trip points table
instead of thermal zone trip point callbacks (Rafael Wysocki,
Daniel Lezcano)
- Clean up and improve the int340x thermal driver (Rafael Wysocki)
- Simplify and clean up the intel_pch thermal driver (Rafael Wysocki)
- Fix the Intel powerclamp thermal driver and make it use the common
idle injection framework (Srinivas Pandruvada)
- Add two module parameters, cpumask and max_idle, to the Intel
powerclamp thermal driver to allow it to affect only a specific
subset of CPUs instead of all of them (Srinivas Pandruvada)
- Make the Intel quark_dts thermal driver Use generic trip point
objects instead of its own trip point representation (Daniel
Lezcano)
- Add toctree entry for thermal documents and fix two issues in the
Intel powerclamp driver documentation (Bagas Sanjaya)
- Use strscpy() to instead of strncpy() in the thermal core (Xu
Panda)
- Fix thermal_sampling_exit() (Vincent Guittot)
- Add Mediatek Low Voltage Thermal Sensor (LVTS) driver (Balsam
Chihi)
- Add r8a779g0 RCar support to the rcar_gen3 thermal driver (Geert
Uytterhoeven)
- Fix useless call to set_trips() when resuming in the rcar_gen3
thermal control driver and add interrupt support detection at init
time to it (Niklas Söderlund)
- Fix memory corruption in the hi3660 thermal driver (Yongqin Liu)
- Fix include path for libnl3 in pkg-config file for libthermal
(Vibhav Pant)
- Remove syscfg-based driver for st as the platform is not supported
any more (Alain Volmat)"
* tag 'thermal-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (135 commits)
thermal/drivers/st: Remove syscfg based driver
thermal: Remove core header inclusion from drivers
tools/lib/thermal: Fix include path for libnl3 in pkg-config file.
thermal/drivers/hisi: Drop second sensor hi3660
thermal/drivers/rcar_gen3_thermal: Fix device initialization
thermal/drivers/rcar_gen3_thermal: Create device local ops struct
thermal/drivers/rcar_gen3_thermal: Do not call set_trips() when resuming
thermal/drivers/rcar_gen3: Add support for R-Car V4H
dt-bindings: thermal: rcar-gen3-thermal: Add r8a779g0 support
thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver
dt-bindings: thermal: mediatek: Add LVTS thermal controllers
thermal/drivers/mediatek: Relocate driver to mediatek folder
tools/lib/thermal: Fix thermal_sampling_exit()
Documentation: powerclamp: Fix numbered lists formatting
Documentation: powerclamp: Escape wildcard in cpumask description
Documentation: admin-guide: Add toctree entry for thermal docs
thermal: intel: powerclamp: Add two module parameters
Documentation: admin-guide: Move intel_powerclamp documentation
thermal: core: Use sysfs_emit_at() instead of scnprintf()
thermal: intel: powerclamp: Fix duration module parameter
...
|
|
Pull SoC DT updates from Arnd Bergmann:
"About a quarter of the changes are for 32-bit arm, mostly filling in
device support for existing machines and adding minor cleanups, mostly
for Qualcomm and Samsung based machines.
Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from
Rockchips that have been around for a while but were lacking kernel
support so far: RV1126 is a Vision SoC with an NPU and is used in the
Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design
for TV boxes and so far only comes with a dts for its refernece
design.
The other 32-bit boards that were added are two ASpeed AST2600 based
BMC boards, the Microchip sam9x60_curiosity development board (Armv5
based!), the Enclustra PE1 FPGA-SoM baseboard, and a few more boards
for i.MX53 and i.MX6ULL.
On the RISC-V side, there are fewer patches, but a total of ten new
single-board computers based on variations of the Allwinner D1/T113
chip, plus one more board based on Microchip Polarfire.
As usual, arm64 has by far the most changes here, with over 700
non-merge changesets, among them over 400 alone for Qualcomm. The
newly added SoCs this time are all recent high-end embedded SoCs for
various markets, each on comes with support for its reference board:
- Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones
- Qualcomm QDU1000/QRU1000 5G RAN platform
- Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs
- TI J784S4 for industrial and automotive applications
In total, there are 46 new arm64 machines:
- Reference platforms for each of the five new SoCs
- Three Amlogic based development boards
- Six embedded machines based on NXP i.MX8MM and i.MX8MP
- The Mediatek mt7986a based Banana Pi R3 router
- Six tablets based on Qualcomm MSM8916 (Snapdragon 410), SM6115
(Snapdragon 662) and SM8250 (Snapdragon 865)
- Two LTE dongles, also based on MSM8916
- Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610),
SDM450 and SDM632
- Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c)
- Nine development boards based on Rockchips RK3588, RK3568, RK3566
and RK3328.
- Five development machines based on TI K3 (AM642/AM654/AM68/AM69)
The cleanup of dtc warnings continues across all platforms, adding to
the total number of changes"
* tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (1035 commits)
dt-bindings: riscv: correct starfive visionfive 2 compatibles
ARM: dts: socfpga: Add enclustra PE1 devicetree
dt-bindings: altera: Add enclustra mercury PE1
arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings
arm64: dts: qcom: qcs404: align RPM G-Link node with bindings
arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings
arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam
arm64: dts: qcom: sc7280: Adjust zombie PWM frequency
arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly
arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses
arm64: dts: qcom: sm7225-fairphone-fp4: move status property down
arm64: dts: qcom: pmk8350: Use the correct PON compatible
arm64: dts: qcom: sc8280xp-x13s: Enable external display
arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink
arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks
arm64: dts: qcom: sm8350-hdk: enable GPU
arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes
arm64: dts: qcom: sm8350: finish reordering nodes
arm64: dts: qcom: sm8350: move more nodes to correct place
arm64: dts: qcom: sm8350: reorder device nodes
...
|
|
Add LVTS thermal controllers dt-binding definition for mt8192 and mt8195.
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230209105628.50294-3-bchihi@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for 6.3
The qcom_scm.h file is moved into firmware/qcom, to avoid having any
Qualcomm-specific files directly in include/linux.
Support for PMIC GLINK is introduced, which on newer Qualcomm platforms
provides an interface to the firmware implementing battery management
and USB Type-C handling. Together with the base driver comes the custom
altmode support driver.
SMD RPM gains support for IPQ9574, and socinfo is extended with support
for revision 17 of the information format and soc_id for IPQ5332 and
IPQ8064 are added.
The qcom_stats is changes not to fail when not all parts are
initialized.
* tag 'qcom-drivers-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
soc: qcom: pmic_glink: Introduce base PMIC GLINK driver
dt-bindings: soc: qcom: Introduce PMIC GLINK binding
soc: qcom: dcc: Drop driver for now
Link: https://lore.kernel.org/r/20230210182242.2023901-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.3
This introduces a new driver for the Data Capture and Compare block,
which provides a mechanism for capturing hardware state (access MMIO
registers) either upon request of triggered automatically e.g. upon a
watchdog bite, for post mortem analysis.
The remote filesystem memory share driver gains support for having its
memory bound to more than a single VMID.
The SCM driver gains the minimal support needed to support a new
mechanism where secure world can put calls on hold and later request
them to be retried.
Support for the new SA8775P platform is added to rpmhpd, QDU1000 is
added to the SCM driver and a long list of platforms are added to the
socinfo driver. Support for socinfo data revision 16 is also introduced.
Lastly a driver to program the ramp controller in MSM8976 is introduced.
* tag 'qcom-drivers-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
firmware: qcom: scm: Add wait-queue handling logic
dt-bindings: firmware: qcom,scm: Add optional interrupt
Revert "dt-bindings: power: rpmpd: Add SM4250 support"
Revert "soc: qcom: rpmpd: Add SM4250 support"
soc: qcom: socinfo: Add a bunch of older SoCs
dt-bindings: arm: qcom,ids: Add a bunch of older SoCs
dt-bindings: arm: qcom,ids: Add QRD board ID
soc: qcom: socinfo: Fix soc_id order
dt-bindings: soc: qcom: smd-rpm: Exclude MSM8936 from glink-channels
dt-bindings: firmware: qcom: scm: Separate VMIDs from header to bindings
soc: qcom: rmtfs: Optionally map RMTFS to more VMs
dt-bindings: reserved-memory: rmtfs: Make qcom,vmid an array
dt-bindings: firmware: scm: Add QDU1000/QRU1000 compatible
dt-bindings: firmware: qcom,scm: narrow clocks and interconnects
dt-bindings: firmware: qcom,scm: document MSM8226 clocks
soc: qcom: ramp_controller: Make things static
soc: qcom: rmphpd: add power domains for sa8775p
dt-bindings: power: qcom,rpmpd: document sa8775p
PM: AVS: qcom-cpr: Fix an error handling path in cpr_probe()
soc: qcom: dcc: rewrite description of dcc sysfs files
...
Link: https://lore.kernel.org/r/20230126163008.3676950-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
More Qualcomm ARM64 DT updates for 6.3
The new Qualcomm QDU1000 and QRU1000 platforms, and the IDP device on
these are introduced. New support for a couple of USB modem sticks from
THWC are introduced, so is support for Xiaomi Mi Pad 5 Pro and the Pro
SKU of the Herobrine device.
The Core Bus Fabric (CBF) is introduced on MSM8996. Interconnect paths
for UFS are also described.
A few fixes related to the power-grid of herobrine, on SC7280, are
introduced.
QFPROM is introduced on IPQ8074 and Interconnect providers are added for
SDM670.
On SDM845 the duplicated wcd9340 audio coded description is moved from
devices to a common file, audio devices are added to the OnePlus 6 and
6T.
On SM6115 debug UART, SMP2P, watchdog nodes are introduced, and the
platform is switched to use #address/size-cells of 2, in line with most
other platforms.
Camera control interface and clock controllers are added for SM6350, and
the CCI interface is enabled on the Fairphone FP4.
On SM8350 the interconnect reference of SDHCI controller is corrected,
DSI1 PHY clocks are properly described as sources for the Display clock
controller and DSI1 is wired up to the display controller.
The firmware paths are corrected for the Sony Xperia Nagara platform.
The GPR bus, audio servic3es and LPASS pinctrl nodes are added for the
SM8550 platform. Additionally a few small typos/errors are corrected.
gpio-ranges are corrected across MSM8953, SM6115 and SC8280XP and a
range of DT validation issues are corrected.
* tag 'qcom-arm64-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (81 commits)
arm64: dts: qcom: sc7280: Power herobrine's 3.3 eDP/TS rail more properly
arm64: dts: qcom: pmk8550: fix PON compatible
arm64: dts: qcom: sm8550: fix DSI controller compatible
arm64: dts: qcom: sc7280: Hook up the touchscreen IO rail on evoker
arm64: dts: qcom: sc7280: Hook up the touchscreen IO rail on villager
arm64: dts: qcom: sc7280: Add 3ms ramp to herobrine's pp3300_left_in_mlb
arm64: dts: qcom: sc7280: On QCard, regulator L3C should be 1.8V
arm64: dts: qcom: sc8280xp: correct LPASS GPIO gpio-ranges
arm64: dts: qcom: msm8992-lg-bullhead: Enable regulators
arm64: dts: qcom: sm6115: correct TLMM gpio-ranges
arm64: dts: qcom: msm8953: correct TLMM gpio-ranges
arm64: dts: qcom: msm8992-lg-bullhead: Correct memory overlaps with the SMEM and MPSS memory regions
arm64: dts: qcom: sm8350-hdk: correct LT9611 pin function
arm64: dts: qcom: sm8350-hdk: align pin config node names with bindings
arm64: dts: qcom: sm6350: Use specific qmpphy compatible
arm64: dts: qcom: sm6115: Add smp2p nodes
arm64: dts: qcom: sm7225-fairphone-fp4: Enable CCI busses
arm64: dts: qcom: sm6350: Add CCI nodes
arm64: dts: qcom: sm6350: Add camera clock controller
dt-bindings: clock: add QCOM SM6350 camera clock bindings
...
Link: https://lore.kernel.org/r/20230210192908.2039976-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Remove the stih416 clock dt-bindings since this platform is no
more supported.
Signed-off-by: Alain Volmat <avolmat@me.com>
Link: https://lore.kernel.org/r/20230209091659.1409-11-avolmat@me.com
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
This file defines all Loongson-2 SoC clock indexes, it should be
included in the device tree in which there's device using the
clocks.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221129034157.15036-1-zhuyinbo@loongson.cn
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add pinctrl bindings for StarFive JH7110 SoC aon pinctrl controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Co-developed-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230209143702.44408-3-hal.feng@starfivetech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add pinctrl bindings for StarFive JH7110 SoC sys pinctrl controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Co-developed-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230209143702.44408-2-hal.feng@starfivetech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Merge DT binding to gain Camera clock defines for SM6350
|
|
Add device tree bindings for camera clock controller for
Qualcomm Technology Inc's SM6350 SoC.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213152617.296426-1-konrad.dybcio@linaro.org
|
|
Add SOC ID for Qualcomm IPQ5332 and IPQ5322 variants.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208055709.13162-2-quic_kathirav@quicinc.com
|
|
Add define for another power saving state used on SM8350 for the GPU.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206145707.122937-3-dmitry.baryshkov@linaro.org
|
|
Add Soc IDs for Qualcomm IPQ8064 and variants.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230124143236.1038-1-ansuelsmth@gmail.com
|
|
* icc-sa8775p
dt-bindings: interconnect: qcom: document the interconnects for sa8775p
interconnect: qcom: add a driver for sa8775p
dt-bindings: interconnect: qcom,sa8775p-rpmh: fix a typo
Link: https://lore.kernel.org/r/20230118140825.242544-2-brgl@bgdev.pl
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
* icc-sdm670
dt-bindings: interconnect: add sdm670 interconnects
interconnect: qcom: add sdm670 interconnects
Link: https://lore.kernel.org/r/20230111005155.50452-1-mailingradian@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
