| Age | Commit message (Collapse) | Author |
|---|
|
There were cases reported where servers will sometimes return more
credits than requested on oplock break responses, which can lead to
most of the credits being allocated for oplock breaks (instead of
for normal operations like read and write) if number of SMB3 requests
in flight always stays above 0 (the oplock and echo credits are
rebalanced when in flight requests goes down to zero).
If oplock credits gets unexpectedly large (e.g. three is more than it
would ever be expected to be) and in flight requests are greater than
zero, then rebalance the oplock credits and regular credits (go
back to reserving just one oplock credit).
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We had seen cases where cifs_invalidate_mapping was logging:
"Could not invalidate inode ..."
if invalidate_inode_pages2 fails but this message does not show what
the rc is. Update the logged message to also log the return code.
Suggested-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This fixes the following warning reported by kernel test robot
fs/smb/client/cifsfs.c:982 cifs_smb3_do_mount() warn: possible
memory leak of 'cifs_sb'
Link: https://lore.kernel.org/all/202306170124.CtQqzf0I-lkp@intel.com/
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"19 hotfixes. 8 of these are cc:stable.
This includes a wholesale reversion of the post-6.4 series 'make slab
shrink lockless'. After input from Dave Chinner it has been decided
that we should go a different way [1]"
Link: https://lkml.kernel.org/r/ZH6K0McWBeCjaf16@dread.disaster.area [1]
* tag 'mm-hotfixes-stable-2023-06-20-12-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
selftests/mm: fix cross compilation with LLVM
mailmap: add entries for Ben Dooks
nilfs2: prevent general protection fault in nilfs_clear_dirty_page()
Revert "mm: vmscan: make global slab shrink lockless"
Revert "mm: vmscan: make memcg slab shrink lockless"
Revert "mm: vmscan: add shrinker_srcu_generation"
Revert "mm: shrinkers: make count and scan in shrinker debugfs lockless"
Revert "mm: vmscan: hold write lock to reparent shrinker nr_deferred"
Revert "mm: vmscan: remove shrinker_rwsem from synchronize_shrinkers()"
Revert "mm: shrinkers: convert shrinker_rwsem to mutex"
nilfs2: fix buffer corruption due to concurrent device reads
scripts/gdb: fix SB_* constants parsing
scripts: fix the gfp flags header path in gfp-translate
udmabuf: revert 'Add support for mapping hugepages (v4)'
mm/khugepaged: fix iteration in collapse_file
memfd: check for non-NULL file_seals in memfd_create() syscall
mm/vmalloc: do not output a spurious warning when huge vmalloc() fails
mm/mprotect: fix do_mprotect_pkey() limit check
writeback: fix dereferencing NULL mapping->host on writeback_page_template
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more regression fix for an assertion failure that uncovered a
nasty problem with stripe calculations. This is caused by a u32
overflow when there are enough devices. The fstests require 6 so this
hasn't been caught, I was able to hit it with 8.
The fix is minimal and only adds u64 casts, we'll clean that up later.
I did various additional tests to be sure"
* tag 'for-6.4-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix u32 overflows when left shifting stripe_nr
|
|
While trying to fix the jfs UBSAN problem reported in syzkaller,
(https://syzkaller.appspot.com/bug?id=01abadbd6ae6a08b1f1987aa61554c6b3ac19ff2)
I found the typo in the comment of dbInitTree function and fix it.
Signed-off-by: Wonguk Lee <wonguk.lee1023@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
Pull smb server fixes from Steve French:
"Four smb3 server fixes, all also for stable:
- fix potential oops in parsing compounded requests
- fix various paths (mkdir, create etc) where mnt_want_write was not
checked first
- fix slab out of bounds in check_message and write"
* tag '6.4-rc6-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: validate session id and tree id in the compound request
ksmbd: fix out-of-bound read in smb2_write
ksmbd: add mnt_want_write to ksmbd vfs functions
ksmbd: validate command payload size
|
|
In jfs_dmap.c at line 381, BLKTODMAP is used to get a logical block
number inside dbFree(). db_l2nbperpage, which is the log2 number of
blocks per page, is passed as an argument to BLKTODMAP which uses it
for shifting.
Syzbot reported a shift out-of-bounds crash because db_l2nbperpage is
too big. This happens because the large value is set without any
validation in dbMount() at line 181.
Thus, make sure that db_l2nbperpage is correct while mounting.
Max number of blocks per page = Page size / Min block size
=> log2(Max num_block per page) = log2(Page size / Min block size)
= log2(Page size) - log2(Min block size)
=> Max db_l2nbperpage = L2PSIZE - L2MINBLOCKSIZE
Reported-and-tested-by: syzbot+d2cd27dcf8e04b232eb2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?id=2a70a453331db32ed491f5cbb07e81bf2d225715
Cc: stable@vger.kernel.org
Suggested-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
[BUG]
David reported an ASSERT() get triggered during fio load on 8 devices
with data/raid6 and metadata/raid1c3:
fio --rw=randrw --randrepeat=1 --size=3000m \
--bsrange=512b-64k --bs_unaligned \
--ioengine=libaio --fsync=1024 \
--name=job0 --name=job1 \
The ASSERT() is from rbio_add_bio() of raid56.c:
ASSERT(orig_logical >= full_stripe_start &&
orig_logical + orig_len <= full_stripe_start +
rbio->nr_data * BTRFS_STRIPE_LEN);
Which is checking if the target rbio is crossing the full stripe
boundary.
[100.789] assertion failed: orig_logical >= full_stripe_start && orig_logical + orig_len <= full_stripe_start + rbio->nr_data * BTRFS_STRIPE_LEN, in fs/btrfs/raid56.c:1622
[100.795] ------------[ cut here ]------------
[100.796] kernel BUG at fs/btrfs/raid56.c:1622!
[100.797] invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[100.798] CPU: 1 PID: 100 Comm: kworker/u8:4 Not tainted 6.4.0-rc6-default+ #124
[100.799] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552-rebuilt.opensuse.org 04/01/2014
[100.802] Workqueue: writeback wb_workfn (flush-btrfs-1)
[100.803] RIP: 0010:rbio_add_bio+0x204/0x210 [btrfs]
[100.806] RSP: 0018:ffff888104a8f300 EFLAGS: 00010246
[100.808] RAX: 00000000000000a1 RBX: ffff8881075907e0 RCX: ffffed1020951e01
[100.809] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000001
[100.811] RBP: 0000000141d20000 R08: 0000000000000001 R09: ffff888104a8f04f
[100.813] R10: ffffed1020951e09 R11: 0000000000000003 R12: ffff88810e87f400
[100.815] R13: 0000000041d20000 R14: 0000000144529000 R15: ffff888101524000
[100.817] FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000
[100.821] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[100.822] CR2: 000055d54e44c270 CR3: 000000010a9a1006 CR4: 00000000003706a0
[100.824] Call Trace:
[100.825] <TASK>
[100.825] ? die+0x32/0x80
[100.826] ? do_trap+0x12d/0x160
[100.827] ? rbio_add_bio+0x204/0x210 [btrfs]
[100.827] ? rbio_add_bio+0x204/0x210 [btrfs]
[100.829] ? do_error_trap+0x90/0x130
[100.830] ? rbio_add_bio+0x204/0x210 [btrfs]
[100.831] ? handle_invalid_op+0x2c/0x30
[100.833] ? rbio_add_bio+0x204/0x210 [btrfs]
[100.835] ? exc_invalid_op+0x29/0x40
[100.836] ? asm_exc_invalid_op+0x16/0x20
[100.837] ? rbio_add_bio+0x204/0x210 [btrfs]
[100.837] raid56_parity_write+0x64/0x270 [btrfs]
[100.838] btrfs_submit_chunk+0x26e/0x800 [btrfs]
[100.840] ? btrfs_bio_init+0x80/0x80 [btrfs]
[100.841] ? release_pages+0x503/0x6d0
[100.842] ? folio_unlock+0x2f/0x60
[100.844] ? __folio_put+0x60/0x60
[100.845] ? btrfs_do_readpage+0xae0/0xae0 [btrfs]
[100.847] btrfs_submit_bio+0x21/0x60 [btrfs]
[100.847] submit_one_bio+0x6a/0xb0 [btrfs]
[100.849] extent_write_cache_pages+0x395/0x680 [btrfs]
[100.850] ? __extent_writepage+0x520/0x520 [btrfs]
[100.851] ? mark_usage+0x190/0x190
[100.852] extent_writepages+0xdb/0x130 [btrfs]
[100.853] ? extent_write_locked_range+0x480/0x480 [btrfs]
[100.854] ? mark_usage+0x190/0x190
[100.854] ? attach_extent_buffer_page+0x220/0x220 [btrfs]
[100.855] ? reacquire_held_locks+0x178/0x280
[100.856] ? writeback_sb_inodes+0x245/0x7f0
[100.857] do_writepages+0x102/0x2e0
[100.858] ? page_writeback_cpu_online+0x10/0x10
[100.859] ? __lock_release.isra.0+0x14a/0x4d0
[100.860] ? reacquire_held_locks+0x280/0x280
[100.861] ? __lock_acquired+0x1e9/0x3d0
[100.862] ? do_raw_spin_lock+0x1b0/0x1b0
[100.863] __writeback_single_inode+0x94/0x450
[100.864] writeback_sb_inodes+0x372/0x7f0
[100.864] ? lock_sync+0xd0/0xd0
[100.865] ? do_raw_spin_unlock+0x93/0xf0
[100.866] ? sync_inode_metadata+0xc0/0xc0
[100.867] ? rwsem_optimistic_spin+0x340/0x340
[100.868] __writeback_inodes_wb+0x70/0x130
[100.869] wb_writeback+0x2d1/0x530
[100.869] ? __writeback_inodes_wb+0x130/0x130
[100.870] ? lockdep_hardirqs_on_prepare.part.0+0xf1/0x1c0
[100.870] wb_do_writeback+0x3eb/0x480
[100.871] ? wb_writeback+0x530/0x530
[100.871] ? mark_lock_irq+0xcd0/0xcd0
[100.872] wb_workfn+0xe0/0x3f0<
[CAUSE]
Commit a97699d1d610 ("btrfs: replace map_lookup->stripe_len by
BTRFS_STRIPE_LEN") changes how we calculate the map length, to reduce
u64 division.
Function btrfs_max_io_len() is to get the length to the stripe boundary.
It calculates the full stripe start offset (inside the chunk) by the
following code:
*full_stripe_start =
rounddown(*stripe_nr, nr_data_stripes(map)) <<
BTRFS_STRIPE_LEN_SHIFT;
The calculation itself is fine, but the value returned by rounddown() is
dependent on both @stripe_nr (which is u32) and nr_data_stripes() (which
returned int).
Thus the result is also u32, then we do the left shift, which can
overflow u32.
If such overflow happens, @full_stripe_start will be a value way smaller
than @offset, causing later "full_stripe_len - (offset -
*full_stripe_start)" to underflow, thus make later length calculation to
have no stripe boundary limit, resulting a write bio to exceed stripe
boundary.
There are some other locations like this, with a u32 @stripe_nr got left
shift, which can lead to a similar overflow.
[FIX]
Fix all @stripe_nr with left shift with a type cast to u64 before the
left shift.
Those involved @stripe_nr or similar variables are recording the stripe
number inside the chunk, which is small enough to be contained by u32,
but their offset inside the chunk can not fit into u32.
Thus for those specific left shifts, a type cast to u64 is necessary so
this patch does not touch them and the code will be cleaned up in the
future to keep the fix minimal.
Reported-by: David Sterba <dsterba@suse.com>
Fixes: a97699d1d610 ("btrfs: replace map_lookup->stripe_len by BTRFS_STRIPE_LEN")
Tested-by: David Sterba <dsterba@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Using the old mount api to remount an overlayfs superblock via
mount(MS_REMOUNT) all mount options will be silently ignored. For
example, if you create an overlayfs mount:
mount -t overlay overlay -o lowerdir=/mnt/a:/mnt/b,upperdir=/mnt/upper,workdir=/mnt/work /mnt/merged
and then issue a remount via:
# force mount(8) to use mount(2)
export LIBMOUNT_FORCE_MOUNT2=always
mount -t overlay overlay -o remount,WOOTWOOT,lowerdir=/DOESNT-EXIST /mnt/merged
with completely nonsensical mount options whatsoever it will succeed
nonetheless. This prevents us from every changing any mount options we
might introduce in the future that could reasonably be changed during a
remount.
We don't need to carry this issue into the new mount api port. Similar
to FUSE we can use the fs_context::oldapi member to figure out that this
is a request coming through the legacy mount api. If we detect it we
continue silently ignoring all mount options.
But for the new mount api we simply report that mount options cannot
currently be changed. This will allow us to potentially alter mount
properties for new or even old properties. It any case, silently
ignoring everything is not something new apis should do.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
The current way how lowcomms is configured is due configfs entries. Each
comms configfs entry will create a lowcomms connection. Even the local
connection itself will be stored as a lowcomms connection, although most
functionality for a local lowcomms connection struct is not necessary.
Now in some scenarios we will see that dlm_controld reports a -EEXIST
when configure a node via configfs:
... /sys/kernel/config/dlm/cluster/comms/1/addr: write failed: 17 -1
Doing a:
cat /sys/kernel/config/dlm/cluster/comms/1/addr_list
reported nothing. This was being seen on cluster with nodeid 1 and it's
local configuration. To be sure the configfs entries are in sync with
lowcomms connection structures we always call dlm_midcomms_close() to be
sure the lowcomms connection gets removed when the configfs entry gets
dropped.
Before commit 07ee38674a0b ("fs: dlm: filter ourself midcomms calls") it
was just doing this by accident and the filter by doing:
if (nodeid == dlm_our_nodeid())
return 0;
inside dlm_midcomms_close() was never been hit because drop_comm() sets
local_comm to NULL and cause that dlm_our_nodeid() returns always the
invalid nodeid 0.
Fixes: 07ee38674a0b ("fs: dlm: filter ourself midcomms calls")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
In journal_init_dev(), if super bdev is used as 'j_dev_bd', then
blkdev_get_by_dev() is called with NULL holder, otherwise, holder will
be journal. However, later in release_journal_dev(), blkdev_put() is
called with journal unconditionally, cause following warning:
WARNING: CPU: 1 PID: 5034 at block/bdev.c:617 bd_end_claim block/bdev.c:617 [inline]
WARNING: CPU: 1 PID: 5034 at block/bdev.c:617 blkdev_put+0x562/0x8a0 block/bdev.c:901
RIP: 0010:blkdev_put+0x562/0x8a0 block/bdev.c:901
Call Trace:
<TASK>
release_journal_dev fs/reiserfs/journal.c:2592 [inline]
free_journal_ram+0x421/0x5c0 fs/reiserfs/journal.c:1896
do_journal_release fs/reiserfs/journal.c:1960 [inline]
journal_release+0x276/0x630 fs/reiserfs/journal.c:1971
reiserfs_put_super+0xe4/0x5c0 fs/reiserfs/super.c:616
generic_shutdown_super+0x158/0x480 fs/super.c:499
kill_block_super+0x64/0xb0 fs/super.c:1422
deactivate_locked_super+0x98/0x160 fs/super.c:330
deactivate_super+0xb1/0xd0 fs/super.c:361
cleanup_mnt+0x2ae/0x3d0 fs/namespace.c:1247
task_work_run+0x16f/0x270 kernel/task_work.c:179
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0xadc/0x2a30 kernel/exit.c:874
do_group_exit+0xd4/0x2a0 kernel/exit.c:1024
__do_sys_exit_group kernel/exit.c:1035 [inline]
__se_sys_exit_group kernel/exit.c:1033 [inline]
__x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1033
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fix this problem by passing in NULL holder in this case.
Reported-by: syzbot+04625c80899f4555de39@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=04625c80899f4555de39
Fixes: 2736e8eeb0cc ("block: use the holder as indication for exclusive opens")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230620111322.1014775-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Provide helpers to set and clear sb->s_readonly_remount including
appropriate memory barriers. Also use this opportunity to document what
the barriers pair with and why they are needed.
Suggested-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Message-Id: <20230620112832.5158-1-jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We ran into issues where mount(8) passed multiple lower layers as one
big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING
option is limited to 256 bytes in strndup_user(). While this would be
fixable by extending the fsconfig() buffer I'd rather encourage users to
append layers via multiple fsconfig() calls as the interface allows
nicely for this. This has also been requested as a feature before.
With this port to the new mount api the following will be possible:
fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0);
/* set upper layer */
fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0);
/* append "/lower2", "/lower3", and "/lower4" */
fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0);
/* turn index feature on */
fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0);
/* append "/lower5" */
fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0);
Specifying ':' would have been rejected so this isn't a regression. And
we can't simply use "lowerdir=/lower" to append on top of existing
layers as "lowerdir=/lower,lowerdir=/other-lower" would make
"/other-lower" the only lower layer so we'd break uapi if we changed
this. So the ':' prefix seems a good compromise.
Users can choose to specify multiple layers at once or individual
layers. A layer is appended if it starts with ":". This requires that
the user has already added at least one layer before. If lowerdir is
specified again without a leading ":" then all previous layers are
dropped and replaced with the new layers. If lowerdir is specified and
empty than all layers are simply dropped.
An additional change is that overlayfs will now parse and resolve layers
right when they are specified in fsconfig() instead of deferring until
super block creation. This allows users to receive early errors.
It also allows users to actually use up to 500 layers something which
was theoretically possible but ended up not working due to the mount
option string passed via mount(2) being too large.
This also allows a more privileged process to set config options for a
lesser privileged process as the creds for fsconfig() and the creds for
fsopen() can differ. We could restrict that they match by enforcing that
the creds of fsopen() and fsconfig() match but I don't see why that
needs to be the case and allows for a good delegation mechanism.
Plus, in the future it means we're able to extend overlayfs mount
options and allow users to specify layers via file descriptors instead
of paths:
fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd);
/* append */
fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd);
/* append */
fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd);
/* clear all layers specified until now */
fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0);
This would be especially nice if users create an overlayfs mount on top
of idmapped layers or just in general private mounts created via
open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear
anywhere in the filesystem. But for now just do the minimal thing.
We should probably aim to move more validation into ovl_fs_parse_param()
so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can
be done in additional patches later.
This is now also rebased on top of the lazy lowerdata lookup which
allows the specificatin of data only layers using the new "::" syntax.
The rules are simple. A data only layers cannot be followed by any
regular layers and data layers must be preceeded by at least one regular
layer.
Parsing the lowerdir mount option must change because of this. The
original patchset used the old lowerdir parsing function to split a
lowerdir mount option string such as:
lowerdir=/lower1:/lower2::/lower3::/lower4
simply replacing each non-escaped ":" by "\0". So sequences of
non-escaped ":" were counted as layers. For example, the previous
lowerdir mount option above would've counted 6 layers instead of 4 and a
lowerdir mount option such as:
lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::"
would be counted as 33 layers. Other than being ugly this didn't matter
much because kern_path() would reject the first "\0" layer. However,
this overcounting of layers becomes problematic when we base allocations
on it where we very much only want to allocate space for 4 layers
instead of 33.
So the new parsing function rejects non-escaped sequences of colons
other than ":" and "::" immediately instead of relying on kern_path().
Link: https://github.com/util-linux/util-linux/issues/2287
Link: https://github.com/util-linux/util-linux/issues/1992
Link: https://bugs.archlinux.org/task/78702
Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Support large folios in block_truncate_page() and avoid three hidden calls
to compound_head().
[willy@infradead.org: fix check of filemap_grab_folio() return value]
Link: https://lkml.kernel.org/r/ZItZOt+XxV12HtzL@casper.infradead.org
Link: https://lkml.kernel.org/r/20230612210141.730128-15-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Saves a call to compound_head() and may be needed to support block size >
PAGE_SIZE.
Link: https://lkml.kernel.org/r/20230612210141.730128-14-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Its one caller already has a folio, so switch it to use the folio API.
Removes a hidden call to compound_head().
Link: https://lkml.kernel.org/r/20230612210141.730128-13-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the folio API and pass the folio from both callers. Saves a hidden
call to compound_head().
Link: https://lkml.kernel.org/r/20230612210141.730128-12-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Get a folio from the page cache instead of a page, then use the folio API
throughout. Removes a few calls to compound_head() and may be needed to
support block size > PAGE_SIZE.
Link: https://lkml.kernel.org/r/20230612210141.730128-11-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Most of the callers already have a folio; convert reiserfs_write_end() to
have a folio. Removes a couple of hidden calls to compound_head().
Link: https://lkml.kernel.org/r/20230612210141.730128-10-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This removes a hidden call to compound_head() inside
__block_commit_write() and moves it to those callers which are still page
based. Also make block_write_end() safe for large folios.
Link: https://lkml.kernel.org/r/20230612210141.730128-9-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If any page in a folio is dirtied, dirty the entire folio. Removes a
number of hidden calls to compound_head() and references to page->mapping
and page->index. Fixes a pre-existing bug where we could mark a folio as
dirty if the file is truncated to a multiple of the page size just as we
take the page fault. I don't believe this bug has any bad effect, it's
just inefficient.
Link: https://lkml.kernel.org/r/20230612210141.730128-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Keep the interface as struct page, but work entirely on the folio
internally. Removes several PAGE_SIZE assumptions and removes some
references to page->index and page->mapping.
Link: https://lkml.kernel.org/r/20230612210141.730128-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We may someday support folios larger than 4GB, so use a size_t for the
byte count within a folio to prevent unpleasant truncations.
Link: https://lkml.kernel.org/r/20230612210141.730128-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove nine hidden calls to compound_head() by using a folio instead of a
page.
Link: https://lkml.kernel.org/r/20230612210141.730128-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add support for large folios and remove some accesses to page->mapping and
page->index.
Link: https://lkml.kernel.org/r/20230612210141.730128-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove a couple of folio->page conversions in the callers, and two calls
to compound_head() in the function itself. Rename it from
__gfs2_jdata_writepage() to __gfs2_jdata_write_folio().
Link: https://lkml.kernel.org/r/20230612210141.730128-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "gfs2/buffer folio changes for 6.5", v3.
This kind of started off as a gfs2 patch series, then became entwined with
buffer heads once I realised that gfs2 was the only remaining caller of
__block_write_full_page(). For those not in the gfs2 world, the big point
of this series is that block_write_full_page() should now handle large
folios correctly.
This patch (of 14):
Replace a few implicit calls to compound_head() with one explicit one.
Link: https://lkml.kernel.org/r/20230612210141.730128-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230612210141.730128-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Android reported a performance regression in the userfaultfd unmap path.
A closer inspection on the userfaultfd_unmap_prep() change showed that a
second tree walk would be necessary in the reworked code.
Fix the regression by passing each VMA that will be unmapped through to
the userfaultfd_unmap_prep() function as they are added to the unmap list,
instead of re-walking the tree for the VMA.
Link: https://lkml.kernel.org/r/20230601015402.2819343-1-Liam.Howlett@oracle.com
Fixes: 69dbe6daf104 ("userfaultfd: use maple tree iterator to iterate VMAs")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Convert all instances of direct pte_t* dereferencing to instead use
ptep_get() helper. This means that by default, the accesses change from a
C dereference to a READ_ONCE(). This is technically the correct thing to
do since where pgtables are modified by HW (for access/dirty) they are
volatile and therefore we should always ensure READ_ONCE() semantics.
But more importantly, by always using the helper, it can be overridden by
the architecture to fully encapsulate the contents of the pte. Arch code
is deliberately not converted, as the arch code knows best. It is
intended that arch code (arm64) will override the default with its own
implementation that can (e.g.) hide certain bits from the core code, or
determine young/dirty status by mixing in state from another source.
Conversion was done using Coccinelle:
----
// $ make coccicheck \
// COCCI=ptepget.cocci \
// SPFLAGS="--include-headers" \
// MODE=patch
virtual patch
@ depends on patch @
pte_t *v;
@@
- *v
+ ptep_get(v)
----
Then reviewed and hand-edited to avoid multiple unnecessary calls to
ptep_get(), instead opting to store the result of a single call in a
variable, where it is correct to do so. This aims to negate any cost of
READ_ONCE() and will benefit arch-overrides that may be more complex.
Included is a fix for an issue in an earlier version of this patch that
was pointed out by kernel test robot. The issue arose because config
MMU=n elides definition of the ptep helper functions, including
ptep_get(). HUGETLB_PAGE=n configs still define a simple
huge_ptep_clear_flush() for linking purposes, which dereferences the ptep.
So when both configs are disabled, this caused a build error because
ptep_get() is not defined. Fix by continuing to do a direct dereference
when MMU=n. This is safe because for this config the arch code cannot be
trying to virtualize the ptes because none of the ptep helpers are
defined.
Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Instead of worrying whether the pmd is stable, userfaultfd_must_wait()
call pte_offset_map() as before, but go back to try again if that fails.
Risk of endless loop? It already broke out if pmd_none(), !pmd_present()
or pmd_trans_huge(), and pte_offset_map() would have cleared pmd_bad():
which leaves pmd_devmap(). Presumably pmd_devmap() is inappropriate in a
vma subject to userfaultfd (it would have been mistreated before), but add
a check just to avoid all possibility of endless loop there.
Link: https://lkml.kernel.org/r/54423f-3dff-fd8d-614a-632727cc4cfb@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zack Rusin <zackr@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Simple walk_page_range() users should set ACTION_AGAIN to retry when
pte_offset_map_lock() fails.
No need to check pmd_trans_unstable(): that was precisely to avoid the
possiblity of calling pte_offset_map() on a racily removed or inserted THP
entry, but such cases are now safely handled inside it. Likewise there is
no need to check pmd_none() or pmd_bad() before calling it.
Link: https://lkml.kernel.org/r/c77d9d10-3aad-e3ce-4896-99e91c7947f3@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: SeongJae Park <sj@kernel.org> for mm/damon part
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Song Liu <song@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zack Rusin <zackr@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: allow pte_offset_map[_lock]() to fail", v2.
What is it all about? Some mmap_lock avoidance i.e. latency reduction.
Initially just for the case of collapsing shmem or file pages to THPs; but
likely to be relied upon later in other contexts e.g. freeing of empty
page tables (but that's not work I'm doing). mmap_write_lock avoidance
when collapsing to anon THPs? Perhaps, but again that's not work I've
done: a quick attempt was not as easy as the shmem/file case.
I would much prefer not to have to make these small but wide-ranging
changes for such a niche case; but failed to find another way, and have
heard that shmem MADV_COLLAPSE's usefulness is being limited by that
mmap_write_lock it currently requires.
These changes (though of course not these exact patches) have been in
Google's data centre kernel for three years now: we do rely upon them.
What is this preparatory series about?
The current mmap locking will not be enough to guard against that tricky
transition between pmd entry pointing to page table, and empty pmd entry,
and pmd entry pointing to huge page: pte_offset_map() will have to
validate the pmd entry for itself, returning NULL if no page table is
there. What to do about that varies: sometimes nearby error handling
indicates just to skip it; but in many cases an ACTION_AGAIN or "goto
again" is appropriate (and if that risks an infinite loop, then there must
have been an oops, or pfn 0 mistaken for page table, before).
Given the likely extension to freeing empty page tables, I have not
limited this set of changes to a THP config; and it has been easier, and
sets a better example, if each site is given appropriate handling: even
where deeper study might prove that failure could only happen if the pmd
table were corrupted.
Several of the patches are, or include, cleanup on the way; and by the
end, pmd_trans_unstable() and suchlike are deleted: pte_offset_map() and
pte_offset_map_lock() then handle those original races and more. Most
uses of pte_lockptr() are deprecated, with pte_offset_map_nolock() taking
its place.
This patch (of 32):
Use pmdp_get_lockless() in preference to READ_ONCE(*pmdp), to get a more
reliable result with PAE (or READ_ONCE as before without PAE); and remove
the unnecessary extra barrier()s which got left behind in its callers.
HOWEVER: Note the small print in linux/pgtable.h, where it was designed
specifically for fast GUP, and depends on interrupts being disabled for
its full guarantee: most callers which have been added (here and before)
do NOT have interrupts disabled, so there is still some need for caution.
Link: https://lkml.kernel.org/r/f35279a9-9ac0-de22-d245-591afbfb4dc@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zack Rusin <zackr@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As the ramfs-based tmpfs uses ramfs_init_fs_context() for the
init_fs_context method, which allocates fc->s_fs_info, use ramfs_kill_sb()
to free it and avoid a memory leak.
Link: https://lkml.kernel.org/r/20230607161523.2876433-1-roberto.sassu@huaweicloud.com
Fixes: c3b1b1cbf002 ("ramfs: add support for "mode=" mount option")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix potential dereference of ERR_PTR @tlink as reported by kernel test
robot
fs/smb/client/connect.c:2775 cifs_match_super() error: 'tlink'
dereferencing possible ERR_PTR()
Link: https://lore.kernel.org/all/202306170124.CtQqzf0I-lkp@intel.com/
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We print most other mount options for a mount when dumping
the mount entries. But miss out the nosharesock value.
This change will print that in addition to the other options.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
closed
In case if all existing file handles are deferred handles and if all of
them gets closed due to handle lease break then we dont need to send
lease break acknowledgment to server, because last handle close will be
considered as lease break ack.
After closing deferred handels, we check for openfile list of inode,
if its empty then we skip sending lease break ack.
Fixes: 59a556aebc43 ("SMB3: drop reference to cfile before sending oplock break")
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
NFS doesn't properly support reporting the btime in getattr (yet), but
61a968b4f05e mistakenly added it to the request_mask. This causes statx
for STATX_BTIME to report a zeroed out btime instead of properly
clearing the flag.
Cc: stable@vger.kernel.org # v6.3+
Fixes: 61a968b4f05e ("nfs: report the inode version in getattr if requested")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2214134
Reported-by: Boyang Xue <bxue@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
In a syzbot stress test that deliberately causes file system errors on
nilfs2 with a corrupted disk image, it has been reported that
nilfs_clear_dirty_page() called from nilfs_clear_dirty_pages() can cause a
general protection fault.
In nilfs_clear_dirty_pages(), when looking up dirty pages from the page
cache and calling nilfs_clear_dirty_page() for each dirty page/folio
retrieved, the back reference from the argument page to "mapping" may have
been changed to NULL (and possibly others). It is necessary to check this
after locking the page/folio.
So, fix this issue by not calling nilfs_clear_dirty_page() on a page/folio
after locking it in nilfs_clear_dirty_pages() if the back reference
"mapping" from the page/folio is different from the "mapping" that held
the page/folio just before.
Link: https://lkml.kernel.org/r/20230612021456.3682-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+53369d11851d8f26735c@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/000000000000da4f6b05eb9bf593@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "revert shrinker_srcu related changes".
This patch (of 7):
This reverts commit cf2e309ebca7bb0916771839f9b580b06c778530.
Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb700bc6 ("mm: vmscan: make
global slab shrink lockless"). The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly. That's why
unregister_shrinker() has become slower.
After discussion, we will try to use the refcount+RCU method [2] proposed
by Dave Chinner to continue to re-implement the lockless slab shrink. So
revert the shrinker_mutex back to shrinker_rwsem first.
[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230609081518.3039120-1-qi.zheng@linux.dev
Link: https://lkml.kernel.org/r/20230609081518.3039120-2-qi.zheng@linux.dev
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As a result of analysis of a syzbot report, it turned out that in three
cases where nilfs2 allocates block device buffers directly via sb_getblk,
concurrent reads to the device can corrupt the allocated buffers.
Nilfs2 uses sb_getblk for segment summary blocks, that make up a log
header, and the super root block, that is the trailer, and when moving and
writing the second super block after fs resize.
In any of these, since the uptodate flag is not set when storing metadata
to be written in the allocated buffers, the stored metadata will be
overwritten if a device read of the same block occurs concurrently before
the write. This causes metadata corruption and misbehavior in the log
write itself, causing warnings in nilfs_btree_assign() as reported.
Fix these issues by setting an uptodate flag on the buffer head on the
first or before modifying each buffer obtained with sb_getblk, and
clearing the flag on failure.
When setting the uptodate flag, the lock_buffer/unlock_buffer pair is used
to perform necessary exclusive control, and the buffer is filled to ensure
that uninitialized bytes are not mixed into the data read from others. As
for buffers for segment summary blocks, they are filled incrementally, so
if the uptodate flag was unset on their allocation, set the flag and zero
fill the buffer once at that point.
Also, regarding the superblock move routine, the starting point of the
memset call to zerofill the block is incorrectly specified, which can
cause a buffer overflow on file systems with block sizes greater than
4KiB. In addition, if the superblock is moved within a large block, it is
necessary to assume the possibility that the data in the superblock will
be destroyed by zero-filling before copying. So fix these potential
issues as well.
Link: https://lkml.kernel.org/r/20230609035732.20426-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+31837fe952932efc8fb9@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/00000000000030000a05e981f475@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the client received NFS4ERR_BADSESSION, it schedules recovery
and start the state manager thread which in turn freezes the
session table and does not allow for any new requests to use the
no-longer valid session. However, it is possible that before
the state manager thread runs, a new operation would use the
released slot that received BADSESSION and was therefore not
updated its sequence number. Such re-use of the slot can lead
the application errors.
Fixes: 5c441544f045 ("NFSv4.x: Handle bad/dead sessions correctly in nfs41_sequence_process()")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Currently, the list_lru::shrinker_id corresponding to the nfs4_xattr
shrinkers is wrong:
>>> prog["nfs4_xattr_cache_lru"].shrinker_id
(int)0
>>> prog["nfs4_xattr_entry_lru"].shrinker_id
(int)0
>>> prog["nfs4_xattr_large_entry_lru"].shrinker_id
(int)0
>>> prog["nfs4_xattr_cache_shrinker"].id
(int)18
>>> prog["nfs4_xattr_entry_shrinker"].id
(int)19
>>> prog["nfs4_xattr_large_entry_shrinker"].id
(int)20
This is not what we expect, which will cause these shrinkers
not to be found in shrink_slab_memcg().
We should assign shrinker::id before calling list_lru_init_memcg(),
so that the corresponding list_lru::shrinker_id will be assigned
the correct value like below:
>>> prog["nfs4_xattr_cache_lru"].shrinker_id
(int)16
>>> prog["nfs4_xattr_entry_lru"].shrinker_id
(int)17
>>> prog["nfs4_xattr_large_entry_lru"].shrinker_id
(int)18
>>> prog["nfs4_xattr_cache_shrinker"].id
(int)16
>>> prog["nfs4_xattr_entry_shrinker"].id
(int)17
>>> prog["nfs4_xattr_large_entry_shrinker"].id
(int)18
So just do it.
Fixes: 95ad37f90c33 ("NFSv4.2: add client side xattr caching.")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
If a SEQUENCE call receives -EIO for a shutdown client, it will retry the
RPC call. Instead of doing that for a shutdown client, just bail out.
Likewise, if the state manager decides to perform recovery for a shutdown
client, it will continuously retry. As above, just bail out.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Walk existing RPC tasks and cancel them with -EIO when the client is
shutdown.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Within each nfs_server sysfs tree, add an entry named "shutdown". Writing
1 to this file will set the cl_shutdown bit on the rpc_clnt structs
associated with that mount. If cl_shutdown is set, the task scheduler
immediately returns -EIO for new tasks.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
After lockd is started, add a symlink for lockd's rpc_client under
NFS' superblock sysfs.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
For the general and state management nfs_client under each mount, create
symlinks to their respective rpc_client sysfs entries.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Create a sysfs directory for each mount that corresponds to the mount's
nfs_server struct. As the mount is being constructed, use the name
"server-n", but rename it to the "MAJOR:MINOR" of the mount after assigning
a device_id. The rename approach allows us to populate the mount's directory
with links to the various rpc_client objects during the mount's
construction. The naming convention (MAJOR:MINOR) can be used to reference
a particular NFS mount's sysfs tree.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
