| Age | Commit message (Collapse) | Author |
|---|
|
At btrfs_commit_super(), called in a few contexts such as when unmounting
a filesystem, we use btrfs_join_transaction() to catch any running
transaction and then commit it. This will however create a new and empty
transaction in case there's no running transaction or there's a running
transaction with a state >= TRANS_STATE_UNBLOCKED.
As we just want to be sure that any existing transaction is fully
committed, we can use btrfs_attach_transaction_barrier() instead of
btrfs_join_transaction(), therefore avoiding the creation and commit of
empty transactions, which only waste IO and causes rotation of the
precious backup roots.
Example where we create and commit a pointless empty transaction:
$ mkfs.btrfs -f /dev/sdj
$ btrfs inspect-internal dump-super /dev/sdj | grep -e '^generation'
generation 6
$ mount /dev/sdj /mnt/sdj
$ touch /mnt/sdj/foo
# Commit the currently open transaction. Just 'sync' or wait ~30
# seconds for the transaction kthread to commit it.
$ sync
$ btrfs inspect-internal dump-super /dev/sdj | grep -e '^generation'
generation 7
$ umount /mnt/sdj
$ btrfs inspect-internal dump-super /dev/sdj | grep -e '^generation'
generation 8
The transaction with id 8 was pointless, an empty transaction that did
not achieve anything.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When flushing reservations we are using btrfs_join_transaction() to get a
handle for the current transaction and then commit it to try to release
space. However btrfs_join_transaction() has some undesirable consequences:
1) If there's no running transaction, it will create one, and we will
commit it right after. This is unnecessary because it will not release
any space, and it will result in unnecessary IO and rotation of backup
roots in the superblock;
2) If there's a current transaction and that transaction is committing
(its state is >= TRANS_STATE_COMMIT_DOING), it will wait for that
transaction to almost finish its commit (for its state to be >=
TRANS_STATE_UNBLOCKED) and then start and return a new transaction.
We will then commit that new transaction, which is pointless because
all we wanted was to wait for the current (previous) transaction to
fully finish its commit (state == TRANS_STATE_COMPLETED), and by
starting and committing a new transaction we are wasting IO too and
causing unnecessary rotation of backup roots in the superblock.
So improve this by using btrfs_attach_transaction_barrier() instead, which
does not create a new transaction if there's none running, and if there's
a current transaction that is committing, it will wait for it to fully
commit and not create a new transaction.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The range is specified only in two ways, we can simplify the case for
the whole filesystem range as a NULL block group parameter.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently if we fully clean a subvolume (not only delete its directory,
but fully clean all it's related data and root item), the associated
qgroup would not be removed.
We have "btrfs qgroup clear-stale" to handle such 0 level qgroups.
Change the behavior to automatically removie the qgroup of a fully
cleaned subvolume when possible:
- Full qgroup but still consistent
We can and should remove the qgroup.
The qgroup numbers should be 0, without any rsv.
- Full qgroup but inconsistent
Can happen with drop_subtree_threshold feature (skip accounting
and mark qgroup inconsistent).
We can and should remove the qgroup.
Higher level qgroup numbers will be incorrect, but since qgroup
is already inconsistent, it should not be a problem.
- Squota mode
This is the special case, we can only drop the qgroup if its numbers
are all 0.
This would be handled by can_delete_qgroup(), so we only need to check
the return value and ignore the -EBUSY error.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1222847
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
Currently if one is utilizing "qgroups/drop_subtree_threshold" sysfs,
and a snapshot with level higher than that value is dropped, we will
not be able to delete the qgroup until next qgroup rescan:
uuid=ffffffff-eeee-dddd-cccc-000000000000
wipefs -fa $dev
mkfs.btrfs -f $dev -O quota -s 4k -n 4k -U $uuid
mount $dev $mnt
btrfs subvolume create $mnt/subv1/
for (( i = 0; i < 1024; i++ )); do
xfs_io -f -c "pwrite 0 2k" $mnt/subv1/file_$i > /dev/null
done
sync
btrfs subvolume snapshot $mnt/subv1 $mnt/snapshot
btrfs quota enable $mnt
btrfs quota rescan -w $mnt
sync
echo 1 > /sys/fs/btrfs/$uuid/qgroups/drop_subtree_threshold
btrfs subvolume delete $mnt/snapshot
btrfs subvolume sync $mnt
btrfs qgroup show -prce --sync $mnt
btrfs qgroup destroy 0/257 $mnt
umount $mnt
The final qgroup removal would fail with the following error:
ERROR: unable to destroy quota group: Device or resource busy
[CAUSE]
The above script would generate a subvolume of level 2, then snapshot
it, enable qgroup, set the drop_subtree_threshold, then drop the
snapshot.
Since the subvolume drop would meet the threshold, qgroup would be
marked inconsistent and skip accounting to avoid hanging the system at
transaction commit.
But currently we do not allow a qgroup with any rfer/excl numbers to be
dropped, and this is not really compatible with the new
drop_subtree_threshold behavior.
[FIX]
Only require the strict zero rfer/excl/rfer_cmpr/excl_cmpr for squota
mode. This is due to the fact that squota can never go inconsistent,
and it can have dropped subvolume but with non-zero qgroup numbers for
future accounting.
For full qgroup mode, we only check if there is a subvolume for it.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Reported by 'gcc -Wcast-qual', the argument from which write_extent_buffer()
reads data to write to the eb should be const. In addition the const
needs to be also added to __write_extent_buffer() local buffers.
All callers of write_eb_member() can now be updated to use const for the
input buffer structure or type.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This was reported by 'gcc -Wcast-qual', the get_unaligned_le8() simply
returns the argument and there's no reason to drop the cast.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This was added in c61a16a701a126 ("Btrfs: fix the confusion between
delalloc bytes and metadata bytes") and removed in 03fe78cc2942c5
("btrfs: use delalloc_bytes to determine flush amount for
shrink_delalloc") where the calculation was reworked to use a
non-constant numbers. This was found by 'make W=2'.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We've started to use for-loop local variables and in a few places this
shadows a function variable. Convert a few cases reported by 'make W=2'.
If applicable also change the style to post-increment, that's the
preferred one.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fix variable names in two macros where there's a local function variable
of the same name. In subpage_calc_start_bit() it's in several callers,
in btrfs_abort_transaction() it's only in replace_file_extents().
Found by 'make W=2'.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When running 'make W=2' there are a few reports where a variable of the
same name is declared in a nested block. In all the cases we can use the
one declared in the parent block, no problematic cases were found.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of using a VFS inode local pointer and then doing many BTRFS_I()
calls inside btrfs_sync_file(), use a btrfs_inode pointer instead. This
makes everything a bit easier to read and less confusing, allowing to
make some statements shorter.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of passing a (VFS) inode pointer argument, pass a btrfs_inode
instead, as this is generally what we do for internal APIs, making it
more consistent with most of the code base. This will later allow to
help to remove a lot of BTRFS_I() calls in btrfs_sync_file().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of passing a (VFS) inode pointer argument, pass a btrfs_inode
instead, as this is generally what we do for internal APIs, making it
more consistent with most of the code base. This will later allow to
help to remove a lot of BTRFS_I() calls in btrfs_sync_file().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of using a inode pointer, use a btrfs_inode pointer in the log
context structure, as this is generally what we need and allows for some
internal APIs to take a btrfs_inode instead, making them more consistent
with most of the code base. This will later allow to help to remove a lot
of BTRFS_I() calls in btrfs_sync_file().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently btrfs_finish_ordered_extent() returns a boolean indicating if
the ordered extent was added to the work queue for completion, but none
of its callers cares about it, so make it return void.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function btrfs_block_group_root() is declared in disk-io.c; however,
all its callers are in block-group.c. Move it to the latter file and
declare it static.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Drop the single-use variable bytenr_orig and instead use btrfs_sb_offset()
in the function argument passing.
Fix a stale comment about not automatically fixing a bad primary
superblock from the backup mirror copies. Also, move the comment closer
to where the primary superblock read occurs.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We are currently using a cached rb_root (struct rb_root_cached) for the
rb root of struct extent_map_tree. This doesn't offer much of an advantage
here because:
1) It's only advantage over the regular rb_root is that it caches a
pointer to the left most node (first node), so a call to
rb_first_cached() doesn't have to chase pointers until it reaches
the left most node;
2) We only have two scenarios that access left most node with
rb_first_cached():
When dropping all extent maps from an inode, during inode eviction;
When iterating over extent maps during the extent map shrinker;
3) In both cases we keep removing extent maps, which causes deletion of
the left most node so rb_erase_cached() has to call rb_next() to find
out what's the next left most node and assign it to
struct rb_root_cached::rb_leftmost;
4) We can do that ourselves in those two uses cases and stop using a
rb_root_cached rb tree and use instead a regular rb_root rb tree.
This reduces the size of struct extent_map_tree by 8 bytes and, since
this structure is embedded in struct btrfs_inode, it also reduces the
size of that structure by 8 bytes.
So on a 64 bits platform the size of btrfs_inode is reduced from 1032
bytes down to 1024 bytes.
This means we will be able to have 4 inodes per 4K page instead of 3.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we name the rb_root member of struct extent_map_tree as 'map',
which is odd and confusing. Since it's a root node, rename it to 'root'.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
On 64 bits platforms we don't really need to have a dedicated member (the
objectid field) for the inode's number since we store in the VFS inode's
i_ino member, which is an unsigned long and this type is 64 bits wide on
64 bits platforms. We only need that field in case we are on a 32 bits
platform because the unsigned long type is 32 bits wide on such platforms
See commit 33345d01522f ("Btrfs: Always use 64bit inode number") regarding
this 64/32 bits detail.
The objectid field of struct btrfs_inode is also used to store the ID of
a root for directories that are stubs for unreferenced roots. In such
cases the inode is a directory and has the BTRFS_INODE_ROOT_STUB runtime
flag set.
So in order to reduce the size of btrfs_inode structure on 64 bits
platforms we can remove the objectid member and use the VFS inode's i_ino
member instead whenever we need to get the inode number. In case the inode
is a root stub (BTRFS_INODE_ROOT_STUB set) we can use the member
last_reflink_trans to store the ID of the unreferenced root, since such
inode is a directory and reflinks can't be done against directories.
So remove the objectid fields for 64 bits platforms and alias the
last_reflink_trans field with a name of ref_root_id in a union.
On a release kernel config, this reduces the size of struct btrfs_inode
from 1040 bytes down to 1032 bytes.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently struct btrfs_inode has a key member, named "location", that is
either:
1) The key of the inode's item. In this case the objectid is the number
of the inode;
2) A key stored in a dir entry with a type of BTRFS_ROOT_ITEM_KEY, for
the case where we have a root that is a snapshot of a subvolume that
points to other subvolumes. In this case the objectid is the ID of
a subvolume inside the snapshotted parent subvolume.
The key is only used to lookup the inode item for the first case, while
for the second it's never used since it corresponds to directory stubs
created with new_simple_dir() and which are marked as dummy, so there's
no actual inode item to ever update. In the second case we only check
the key type at btrfs_ino() for 32 bits platforms and its objectid is
only needed for unlink.
Instead of using a key we can do fine with just the objectid, since we
can generate the key whenever we need it having only the objectid, as
in all use cases the type is always BTRFS_INODE_ITEM_KEY and the offset
is always 0.
So use only an objectid instead of a full key. This reduces the size of
struct btrfs_inode from 1048 bytes down to 1040 bytes on a release kernel.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When not using the NO_HOLES feature we always allocate an io tree for an
inode's file_extent_tree. This is wasteful because that io tree is only
used for regular files, so we allocate more memory than needed for inodes
that represent directories or symlinks for example, or for inodes that
correspond to free space inodes.
So improve on this by allocating the io tree only for inodes of regular
files that are not free space inodes.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The index_cnt field of struct btrfs_inode is used only for two purposes:
1) To store the index for the next entry added to a directory;
2) For the data relocation inode to track the logical start address of the
block group currently being relocated.
For the relocation case we use index_cnt because it's not used for
anything else in the relocation use case - we could have used other fields
that are not used by relocation such as defrag_bytes, last_unlink_trans
or last_reflink_trans for example (among others).
Since the csum_bytes field is not used for directories, do the following
changes:
1) Put index_cnt and csum_bytes in a union, and index_cnt is only
initialized when the inode is a directory. The csum_bytes is only
accessed in IO paths for regular files, so we're fine here;
2) Use the defrag_bytes field for relocation, since the data relocation
inode is never used for defrag purposes. And to make the naming better,
alias it to reloc_block_group_start by using a union.
This reduces the size of struct btrfs_inode by 8 bytes in a release
kernel, from 1056 bytes down to 1048 bytes.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we use the spinlock inode_lock from struct btrfs_root to
serialize access to two different data structures:
1) The delayed inodes xarray (struct btrfs_root::delayed_nodes);
2) The inodes xarray (struct btrfs_root::inodes).
Instead of using our own lock, we can use the spinlock that is part of the
xarray implementation, by using the xa_lock() and xa_unlock() APIs and
using the xarray APIs with the double underscore prefix that don't take
the xarray locks and assume the caller is using xa_lock() and xa_unlock().
So remove the spinlock inode_lock from struct btrfs_root and use the
corresponding xarray locks. This brings 2 benefits:
1) We reduce the size of struct btrfs_root, from 1336 bytes down to
1328 bytes on a 64 bits release kernel config;
2) We reduce lock contention by not using anymore the same lock for
changing two different and unrelated xarrays.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Make btrfs_iget_path() simpler and easier to read by avoiding nesting of
if-then-else statements and having an error label to do all the error
handling instead of repeating it a couple times.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When creating a new inode, at btrfs_create_new_inode(), one of the very
last steps is to add the inode to the root's inodes xarray. This often
requires allocating memory which may fail (even though xarrays have a
dedicated kmem_cache which make it less likely to fail), and at that point
we are forced to abort the current transaction (as some, but not all, of
the inode metadata was added to its subvolume btree).
To avoid a transaction abort, preallocate memory for the xarray early at
btrfs_create_new_inode(), so that if we fail we don't need to abort the
transaction and the insertion into the xarray is guaranteed to succeed.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we use a red black tree (rb-tree) to track the currently open
inodes of a root (in struct btrfs_root::inode_tree). This however is not
very efficient when the number of inodes is large since rb-trees are
binary trees. For example for 100K open inodes, the tree has a depth of
17. Besides that, inserting into the tree requires navigating through it
and pulling useless cache lines in the process since the red black tree
nodes are embedded within the btrfs inode - on the other hand, by being
embedded, it requires no extra memory allocations.
We can improve this by using an xarray instead, which is efficient when
indices are densely clustered (such as inode numbers), is more cache
friendly and behaves like a resizable array, with a much better search
and insertion complexity than a red black tree. This only has one small
disadvantage which is that insertion will sometimes require allocating
memory for the xarray - which may fail (not that often since it uses a
kmem_cache) - but on the other hand we can reduce the btrfs inode
structure size by 24 bytes (from 1080 down to 1056 bytes) after removing
the embedded red black tree node, which after the next patches will allow
to reduce the size of the structure to 1024 bytes, meaning we will be able
to store 4 inodes per 4K page instead of 3 inodes.
This change does a straightforward change to use an xarray, and results
in a transaction abort if we can't allocate memory for the xarray when
creating an inode - but the next patch changes things so that we don't
need to abort.
Running the following fs_mark test showed some improvements:
$ cat test.sh
#!/bin/bash
DEV=/dev/nullb0
MNT=/mnt/nullb0
MOUNT_OPTIONS="-o ssd"
FILES=100000
THREADS=$(nproc --all)
echo "performance" | \
tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
mkfs.btrfs -f $DEV
mount $MOUNT_OPTIONS $DEV $MNT
OPTS="-S 0 -L 5 -n $FILES -s 0 -t $THREADS -k"
for ((i = 1; i <= $THREADS; i++)); do
OPTS="$OPTS -d $MNT/d$i"
done
fs_mark $OPTS
umount $MNT
Before this patch:
FSUse% Count Size Files/sec App Overhead
10 1200000 0 92081.6 12505547
16 2400000 0 138222.6 13067072
23 3600000 0 148833.1 13290336
43 4800000 0 97864.7 13931248
53 6000000 0 85597.3 14384313
After this patch:
FSUse% Count Size Files/sec App Overhead
10 1200000 0 93225.1 12571078
16 2400000 0 146720.3 12805007
23 3600000 0 160626.4 13073835
46 4800000 0 116286.2 13802927
53 6000000 0 90087.9 14754892
The test was run with a release kernel config (Debian's default config).
Also capturing the insertion times into the rb tree and into the xarray,
that is measuring the duration of the old function inode_tree_add() and
the duration of the new btrfs_add_inode_to_root() function, gave the
following results (in nanoseconds):
Before this patch, inode_tree_add() execution times:
Count: 5000000
Range: 0.000 - 5536887.000; Mean: 775.674; Median: 729.000; Stddev: 4820.961
Percentiles: 90th: 1015.000; 95th: 1139.000; 99th: 1397.000
0.000 - 7.816: 40 |
7.816 - 37.858: 209 |
37.858 - 170.278: 6059 |
170.278 - 753.961: 2754890 #####################################################
753.961 - 3326.728: 2232312 ###########################################
3326.728 - 14667.018: 4366 |
14667.018 - 64652.943: 852 |
64652.943 - 284981.761: 550 |
284981.761 - 1256150.914: 221 |
1256150.914 - 5536887.000: 7 |
After this patch, btrfs_add_inode_to_root() execution times:
Count: 5000000
Range: 0.000 - 2900652.000; Mean: 272.148; Median: 241.000; Stddev: 2873.369
Percentiles: 90th: 342.000; 95th: 432.000; 99th: 572.000
0.000 - 7.264: 104 |
7.264 - 33.145: 352 |
33.145 - 140.081: 109606 #
140.081 - 581.930: 4840090 #####################################################
581.930 - 2407.590: 43532 |
2407.590 - 9950.979: 2245 |
9950.979 - 41119.278: 514 |
41119.278 - 169902.616: 155 |
169902.616 - 702018.539: 47 |
702018.539 - 2900652.000: 9 |
Average, percentiles, standard deviation, etc, are all much better.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are several hard-to-hit ASSERT()s hit inside raid56.
Unfortunately the ASSERT() expression is a little complex, and except
the ASSERT(), there is nothing to provide any clue.
Considering if race is involved, it's pretty hard to reproduce.
Meanwhile sometimes the dump of the rbio structure can provide some
pretty good clues, it's worth to do the extra multi-line dump for
btrfs raid56 related code.
The dump looks like this:
BTRFS critical (device dm-3): bioc logical=4598530048 full_stripe=4598530048 size=0 map_type=0x81 mirror=0 replace_nr_stripes=0 replace_stripe_src=-1 num_stripes=5
BTRFS critical (device dm-3): nr=0 devid=1 physical=1166147584
BTRFS critical (device dm-3): nr=1 devid=2 physical=1145176064
BTRFS critical (device dm-3): nr=2 devid=4 physical=1145176064
BTRFS critical (device dm-3): nr=3 devid=5 physical=1145176064
BTRFS critical (device dm-3): nr=4 devid=3 physical=1145176064
BTRFS critical (device dm-3): rbio flags=0x0 nr_sectors=80 nr_data=4 real_stripes=5 stripe_nsectors=16 scrubp=0 dbitmap=0x0
BTRFS critical (device dm-3): logical=4598530048
assertion failed: orig_logical >= full_stripe_start && orig_logical + orig_len <= full_stripe_start + rbio->nr_data * BTRFS_STRIPE_LEN, in fs/btrfs/raid56.c:1702
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Due to a refactoring introduced by commit 53d9981ca20e ("btrfs: split
btrfs_alloc_ordered_extent to allocation and insertion helpers"), the
function btrfs_alloc_ordered_extent() was renamed to
alloc_ordered_extent(), so the comment at btrfs_remove_ordered_extent()
is no longer very accurate. Update the comment to refer to the new
name "alloc_ordered_extent()".
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fix typo in the end IO compression callbacks, from "comprssed" to
"compressed".
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function btrfs_migrate_to_delayed_refs_rsv() is no longer used.
Its last use was removed in commit 2f6397e448e6 ("btrfs: don't refill
whole delayed refs block reserve when starting transaction").
So remove the function.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
It's not used outside zoned.c, so make it static.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Passing in a 'struct btrfs_io_geometry into handle_ops_on_dev_replace
can reduce the number of arguments by two.
No functional changes otherwise.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The ioctls that add relations, create qgroups or set limits start/join
transaction. When quotas are not enabled this is not necessary, there
will be errors reported back anyway but this could be also misleading
and we should really report that quotas are not enabled. For that use
-ENOTCONN.
The helper is meant to do a quick check before any other standard ioctl
checks are done. If quota is disabled meanwhile we still rely on proper
locking inside any active operation changing the qgroup structures.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pull smb client fix from Steve French:
"Fix for smb3 readahead performance regression"
* tag '6.10-rc6-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix read-performance regression by dropping readahead expansion
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix folio refcounting when releasing them (encoded write, dummy
extent buffer)
- fix out of bounds read when checking qgroup inherit data
- fix how configurable chunk size is handled in zoned mode
- in the ref-verify tool, fix uninitialized return value when checking
extent owner ref and simple quota are not enabled
* tag 'for-6.10-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix folio refcount in __alloc_dummy_extent_buffer()
btrfs: fix folio refcount in btrfs_do_encoded_write()
btrfs: fix uninitialized return value in the ref-verify tool
btrfs: always do the basic checks for btrfs_qgroup_inherit structure
btrfs: zoned: fix calc_available_free_space() for zoned mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from, Andrew Morton:
"6 hotfies, all cc:stable. Some fixes for longstanding nilfs2 issues
and three unrelated MM fixes"
* tag 'mm-hotfixes-stable-2024-07-03-22-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: fix incorrect inode allocation from reserved inodes
nilfs2: add missing check for inode numbers on directory entries
nilfs2: fix inode number range checks
mm: avoid overflows in dirty throttling logic
Revert "mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again"
mm: optimize the redundant loop of mm_update_owner_next()
|
|
Another improper use of __folio_put() in an error path after freshly
allocating pages/folios which returns them with the refcount initialized
to 1. The refactor from __free_pages() -> __folio_put() (instead of
folio_put) removed a refcount decrement found in __free_pages() and
folio_put but absent from __folio_put().
Fixes: 13df3775efca ("btrfs: cleanup metadata page pointer usage")
CC: stable@vger.kernel.org # 6.8+
Tested-by: Ed Tomlinson <edtoml@gmail.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The conversion to folios switched __free_page() to __folio_put() in the
error path in btrfs_do_encoded_write().
However, this gets the page refcounting wrong. If we do hit that error
path (I reproduced by modifying btrfs_do_encoded_write to pretend to
always fail in a way that jumps to out_folios and running the fstests
case btrfs/281), then we always hit the following BUG freeing the folio:
BUG: Bad page state in process btrfs pfn:40ab0b
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x61be5 pfn:0x40ab0b
flags: 0x5ffff0000000000(node=0|zone=2|lastcpupid=0x1ffff)
raw: 05ffff0000000000 0000000000000000 dead000000000122 0000000000000000
raw: 0000000000061be5 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: nonzero _refcount
Call Trace:
<TASK>
dump_stack_lvl+0x3d/0xe0
bad_page+0xea/0xf0
free_unref_page+0x8e1/0x900
? __mem_cgroup_uncharge+0x69/0x90
__folio_put+0xe6/0x190
btrfs_do_encoded_write+0x445/0x780
? current_time+0x25/0xd0
btrfs_do_write_iter+0x2cc/0x4b0
btrfs_ioctl_encoded_write+0x2b6/0x340
It turns out __free_page() decreases the page reference count while
__folio_put() does not. Switch __folio_put() to folio_put() which
decreases the folio reference count first.
Fixes: 400b172b8cdc ("btrfs: compression: migrate compression/decompression paths to folios")
Tested-by: Ed Tomlinson <edtoml@gmail.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If the bitmap block that manages the inode allocation status is corrupted,
nilfs_ifile_create_inode() may allocate a new inode from the reserved
inode area where it should not be allocated.
Previous fix commit d325dc6eb763 ("nilfs2: fix use-after-free bug of
struct nilfs_root"), fixed the problem that reserved inodes with inode
numbers less than NILFS_USER_INO (=11) were incorrectly reallocated due to
bitmap corruption, but since the start number of non-reserved inodes is
read from the super block and may change, in which case inode allocation
may occur from the extended reserved inode area.
If that happens, access to that inode will cause an IO error, causing the
file system to degrade to an error state.
Fix this potential issue by adding a wraparound option to the common
metadata object allocation routine and by modifying
nilfs_ifile_create_inode() to disable the option so that it only allocates
inodes with inode numbers greater than or equal to the inode number read
in "nilfs->ns_first_ino", regardless of the bitmap status of reserved
inodes.
Link: https://lkml.kernel.org/r/20240623051135.4180-4-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Syzbot reported that mounting and unmounting a specific pattern of
corrupted nilfs2 filesystem images causes a use-after-free of metadata
file inodes, which triggers a kernel bug in lru_add_fn().
As Jan Kara pointed out, this is because the link count of a metadata file
gets corrupted to 0, and nilfs_evict_inode(), which is called from iput(),
tries to delete that inode (ifile inode in this case).
The inconsistency occurs because directories containing the inode numbers
of these metadata files that should not be visible in the namespace are
read without checking.
Fix this issue by treating the inode numbers of these internal files as
errors in the sanity check helper when reading directory folios/pages.
Also thanks to Hillf Danton and Matthew Wilcox for their initial mm-layer
analysis.
Link: https://lkml.kernel.org/r/20240623051135.4180-3-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+d79afb004be235636ee8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d79afb004be235636ee8
Reported-by: Jan Kara <jack@suse.cz>
Closes: https://lkml.kernel.org/r/20240617075758.wewhukbrjod5fp5o@quack3
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "nilfs2: fix potential issues related to reserved inodes".
This series fixes one use-after-free issue reported by syzbot, caused by
nilfs2's internal inode being exposed in the namespace on a corrupted
filesystem, and a couple of flaws that cause problems if the starting
number of non-reserved inodes written in the on-disk super block is
intentionally (or corruptly) changed from its default value.
This patch (of 3):
In the current implementation of nilfs2, "nilfs->ns_first_ino", which
gives the first non-reserved inode number, is read from the superblock,
but its lower limit is not checked.
As a result, if a number that overlaps with the inode number range of
reserved inodes such as the root directory or metadata files is set in the
super block parameter, the inode number test macros (NILFS_MDT_INODE and
NILFS_VALID_INODE) will not function properly.
In addition, these test macros use left bit-shift calculations using with
the inode number as the shift count via the BIT macro, but the result of a
shift calculation that exceeds the bit width of an integer is undefined in
the C specification, so if "ns_first_ino" is set to a large value other
than the default value NILFS_USER_INO (=11), the macros may potentially
malfunction depending on the environment.
Fix these issues by checking the lower bound of "nilfs->ns_first_ino" and
by preventing bit shifts equal to or greater than the NILFS_USER_INO
constant in the inode number test macros.
Also, change the type of "ns_first_ino" from signed integer to unsigned
integer to avoid the need for type casting in comparisons such as the
lower bound check introduced this time.
Link: https://lkml.kernel.org/r/20240623051135.4180-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20240623051135.4180-2-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
cifs_expand_read() is causing a performance regression of around 30% by
causing extra pagecache to be allocated for an inode in the readahead path
before we begin actually dispatching RPC requests, thereby delaying the
actual I/O. The expansion is sized according to the rsize parameter, which
seems to be 4MiB on my test system; this is a big step up from the first
requests made by the fio test program.
Simple repro (look at read bandwidth number):
fio --name=writetest --filename=/xfstest.test/foo --time_based --runtime=60 --size=16M --numjobs=1 --rw=read
Fix this by removing cifs_expand_readahead(). Readahead expansion is
mostly useful for when we're using the local cache if the local cache has a
block size greater than PAGE_SIZE, so we can dispense with it when not
caching.
Fixes: 69c3c023af25 ("cifs: Implement netfslib hooks")
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"VFS:
- Improve handling of deep ancestor chains in is_subdir()
- Release locks cleanly when fctnl_setlk() races with close().
When setting a file lock fails the VFS tries to cleanup the already
created lock. The helper used for this calls back into the LSM
layer which may cause it to fail, leaving the stale lock accessible
via /proc/locks.
AFS:
- Fix a comma/semicolon typo"
* tag 'vfs-6.10-rc7.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
afs: Convert comma to semicolon
fs: better handle deep ancestor chains in is_subdir()
filelock: Remove locks reliably when fcntl/close race is detected
|
|
Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20240702024055.1411407-1-nichen@iscas.ac.cn/
Link: https://lore.kernel.org/r/20240702024055.1411407-1-nichen@iscas.ac.cn
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Jan reported that 'cd ..' may take a long time in deep directory
hierarchies under a bind-mount. If concurrent renames happen it is
possible to livelock in is_subdir() because it will keep retrying.
Change is_subdir() from simply retrying over and over to retry once and
then acquire the rename lock to handle deep ancestor chains better. The
list of alternatives to this approach were less then pleasant. Change
the scope of rcu lock to cover the whole walk while at it.
A big thanks to Jan and Linus. Both Jan and Linus had proposed
effectively the same thing just that one version ended up being slightly
more elegant.
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"The most important one fixes possible infinite loops reported by a
smartphone vendor OPPO recently due to some unexpected zero-sized
compressed pcluster out of interrupted I/Os, storage failures, etc.
Another patch fixes global buffer memory leak on unloading, and the
remaining one switches to use super_set_uuid() to keep with the other
filesystems.
Summary:
- Fix possible global buffer memory leak when unloading EROFS module
- Fix FS_IOC_GETFSUUID ioctl by using super_set_uuid()
- Reset m_llen to 0 so then it can retry if metadata is invalid"
* tag 'erofs-for-6.10-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: ensure m_llen is reset to 0 if metadata is invalid
erofs: convert to use super_set_uuid to support for FS_IOC_GETFSUUID
erofs: fix possible memory leak in z_erofs_gbuf_exit()
|
|
When fcntl_setlk() races with close(), it removes the created lock with
do_lock_file_wait().
However, LSMs can allow the first do_lock_file_wait() that created the lock
while denying the second do_lock_file_wait() that tries to remove the lock.
In theory (but AFAIK not in practice), posix_lock_file() could also fail to
remove a lock due to GFP_KERNEL allocation failure (when splitting a range
in the middle).
After the bug has been triggered, use-after-free reads will occur in
lock_get_status() when userspace reads /proc/locks. This can likely be used
to read arbitrary kernel memory, but can't corrupt kernel memory.
This only affects systems with SELinux / Smack / AppArmor / BPF-LSM in
enforcing mode and only works from some security contexts.
Fix it by calling locks_remove_posix() instead, which is designed to
reliably get rid of POSIX locks associated with the given file and
files_struct and is also used by filp_flush().
Fixes: c293621bbf67 ("[PATCH] stale POSIX lock handling")
Cc: stable@kernel.org
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2563
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20240702-fs-lock-recover-2-v1-1-edd456f63789@google.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In the ref-verify tool, when processing the inline references of an extent
item, we may end up returning with uninitialized return value, because:
1) The 'ret' variable is not initialized if there are no inline extent
references ('ptr' == 'end' before the while loop starts);
2) If we find an extent owner inline reference we don't initialize 'ret'.
So fix these cases by initializing 'ret' to 0 when declaring the variable
and set it to -EINVAL if we find an extent owner inline references and
simple quotas are not enabled (as well as print an error message).
Reported-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/59b40ebe-c824-457d-8b24-0bbca69d472b@gmail.com/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
