| Age | Commit message (Collapse) | Author |
|---|
|
Most of the callers of erofs_read_metabuf() have the following form:
block = erofs_blknr(sb, offset);
off = erofs_blkoff(sb, offset);
p = erofs_read_metabuf(...., erofs_pos(sb, block), ...);
if (IS_ERR(p))
return PTR_ERR(p);
q = p + off;
// no further uses of p, block or off.
The value passed to erofs_read_metabuf() is offset rounded down to block
size, i.e. offset - off. Passing offset as-is would increase the return
value by off in case of success and keep the return value unchanged in
in case of error. In other words, the same could be achieved by
q = erofs_read_metabuf(...., offset, ...);
if (IS_ERR(q))
return PTR_ERR(q);
This commit convert these simple cases.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20240425195915.GD1031757@ZenIV
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
just lift the call of erofs_pos() into the callers; it will
collapse in most of them, but that's better done caller-by-caller.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20240425195846.GC1031757@ZenIV
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Avoid unnecessary #ifdefs and simplify the code a bit.
Signed-off-by: Hongzhen Luo <hongzhen@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240517095652.2282972-1-hongzhen@linux.alibaba.com
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs.git
Al Viro has a series of "->bd_inode elimination" which touches several
subsystems, but he also has EROFS-specific further cleanup patches
which I tend to go with EROFS tree for more testing.
Let's merge "#misc.erofs" as Al suggested in the previous email [1]:
"#misc.erofs (the first two commits) is put into never-rebased mode;
you pull it into your tree and do whatever's convenient with the rest.
I merge the same branch into block_device work; that way it doesn't
cause conflicts whatever else happens in our trees."
[1] https://lore.kernel.org/r/20240503041542.GV2118490@ZenIV
Signed-off-by: Gao Xiang <xiang@kernel.org>
|
|
This code calls folio_put() on an error pointer which will lead to a
crash. Check for both error pointers and NULL pointers before calling
folio_put().
Fixes: 5eea586b47f0 ("ext4: convert bd_buddy_page to bd_buddy_folio")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/eaafa1d9-a61c-4af4-9f97-d3ad72c60200@moroto.mountain
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When invalidating a file as part of breaking a lease, the folios holding
the file data are disposed of, and truncate calls ->invalidate_folio()
to get rid of them rather than calling ->release_folio(). This means
that the netfs_inode::zero_point value didn't get updated in current
upstream code to reflect the point after which we can assume that the
server will only return zeroes, and future reads will then return blocks
of zeroes if the file got extended for any region beyond the old zero
point.
Fix this by updating zero_point before invalidating the inode in
cifs_revalidate_mapping().
Suggested-by: David Howells <dhowells@redhat.com>
Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib")
Reviewed-by: David Howells <dhowell@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull smb client updates from Steve French:
- three important fixes to recent netfs conversion to fix various
xfstest failures, and rmmod oops
- cleanup patch to fix various GCC-14 warnings
* tag '6.10-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix perf regression with cached writes with netfs conversion
cifs: Fix locking in cifs_strict_readv()
cifs: Change from mempool_destroy to mempool_exit for request pools
smb: smb2pdu.h: Avoid -Wflex-array-member-not-at-end warnings
|
|
At lookup_extent_data_ref() we are incorrectly checking if we are at the
last slot of the last leaf in the extent tree. We are returning -ENOENT
if btrfs_next_leaf() returns a value greater than 1, but btrfs_next_leaf()
never returns anything greater than 1:
1) It returns < 0 on error;
2) 0 if there is a next leaf (or a new item was added to the end of the
current leaf after releasing the path);
3) 1 if there are no more leaves (and no new items were added to the last
leaf after releasing the path).
So fix this by checking if the return value is greater than zero instead
of being greater than one.
Fixes: 1618aa3c2e01 ("btrfs: simplify return variables in lookup_extent_data_ref()")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The following error message is displayed:
../fs/btrfs/scrub.c:2152:9: error: ‘ret’ may be used uninitialized
in this function [-Werror=maybe-uninitialized]"
Compiler version: gcc version: (Debian 10.2.1-6) 10.2.1 20210110
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
While loading a zone's info during creation of a block group, we can race
with a device replace operation and then trigger a use-after-free on the
device that was just replaced (source device of the replace operation).
This happens because at btrfs_load_zone_info() we extract a device from
the chunk map into a local variable and then use the device while not
under the protection of the device replace rwsem. So if there's a device
replace operation happening when we extract the device and that device
is the source of the replace operation, we will trigger a use-after-free
if before we finish using the device the replace operation finishes and
frees the device.
Fix this by enlarging the critical section under the protection of the
device replace rwsem so that all uses of the device are done inside the
critical section.
CC: stable@vger.kernel.org # 6.1.x: 15c12fcc50a1: btrfs: zoned: introduce a zone_info struct in btrfs_load_block_group_zone_info
CC: stable@vger.kernel.org # 6.1.x: 09a46725cc84: btrfs: zoned: factor out per-zone logic from btrfs_load_block_group_zone_info
CC: stable@vger.kernel.org # 6.1.x: 9e0e3e74dc69: btrfs: zoned: factor out single bg handling from btrfs_load_block_group_zone_info
CC: stable@vger.kernel.org # 6.1.x: 87463f7e0250: btrfs: zoned: factor out DUP bg handling from btrfs_load_block_group_zone_info
CC: stable@vger.kernel.org # 6.1.x
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If we delete subvolumes whose ID is the largest in the filesystem, then
unmount and mount again, then btrfs_init_root_free_objectid on the
tree_root will select a subvolid smaller than that one and thus allow
reusing it.
If we are also using qgroups (and particularly squotas) it is possible
to delete the subvol without deleting the qgroup. In that case, we will
be able to create a new subvol whose id already has a level 0 qgroup.
This will result in re-using that qgroup which would then lead to
incorrect accounting.
Fixes: 6ed05643ddb1 ("btrfs: create qgroup earlier in snapshot creation")
CC: stable@vger.kernel.org # 6.7+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
On filesystems without enabled quotas there's still a warning message in
the logs when rescan is called. In that case it's not a problem that
should be reported, rescan can be called unconditionally. Change the
error code to ENOTCONN which is used for 'quotas not enabled' elsewhere.
Remove message (also a warning) when rescan is called during an ongoing
rescan, this brings no useful information and the error code is
sufficient.
Change message levels to debug for now, they can be removed eventually.
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Two IMA changes, one EVM change, a use after free bug fix, and a code
cleanup to address "-Wflex-array-member-not-at-end" warnings:
- The existing IMA {ascii, binary}_runtime_measurements lists include
a hard coded SHA1 hash. To address this limitation, define per TPM
enabled hash algorithm {ascii, binary}_runtime_measurements lists
- Close an IMA integrity init_module syscall measurement gap by
defining a new critical-data record
- Enable (partial) EVM support on stacked filesystems (overlayfs).
Only EVM portable & immutable file signatures are copied up, since
they do not contain filesystem specific metadata"
* tag 'integrity-v6.10' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: add crypto agility support for template-hash algorithm
evm: Rename is_unsupported_fs to is_unsupported_hmac_fs
fs: Rename SB_I_EVM_UNSUPPORTED to SB_I_EVM_HMAC_UNSUPPORTED
evm: Enforce signatures on unsupported filesystem for EVM_INIT_X509
ima: re-evaluate file integrity on file metadata change
evm: Store and detect metadata inode attributes changes
ima: Move file-change detection variables into new structure
evm: Use the metadata inode to calculate metadata hash
evm: Implement per signature type decision in security_inode_copy_up_xattr
security: allow finer granularity in permitting copy-up of security xattrs
ima: Rename backing_inode to real_inode
integrity: Avoid -Wflex-array-member-not-at-end warnings
ima: define an init_module critical data record
ima: Fix use-after-free on a dentry's dname.name
|
|
Initialize last_block_in_bio of struct f2fs_bio_info and clean up code.
Signed-off-by: Wu Bo <bo.wu@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
When building without CONFIG_F2FS_FAULT_INJECTION, there is a warning
from each file that includes f2fs.h because the stub for
f2fs_build_fault_attr() is missing inline:
In file included from fs/f2fs/segment.c:21:
fs/f2fs/f2fs.h:4605:12: warning: 'f2fs_build_fault_attr' defined but not used [-Wunused-function]
4605 | static int f2fs_build_fault_attr(struct f2fs_sb_info *sbi, unsigned long rate,
| ^~~~~~~~~~~~~~~~~~~~~
Add the missing inline to resolve all of the warnings for this
configuration.
Fixes: 4ed886b187f4 ("f2fs: check validation of fault attrs in f2fs_build_fault_attr()")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.
Things we sprinkled into general kernel code:
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter:
- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.
BPF:
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API:
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.
- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling:
- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.
- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.
- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers:
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"
* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...
|
|
Pull fsverity update from Eric Biggers:
"Fix a false positive kmemleak warning"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: use register_sysctl_init() to avoid kmemleak warning
|
|
Pull fscrypt update from Eric Biggers:
"Improve the performance of opening unencrypted files on filesystems
that support fscrypt"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: try to avoid refing parent dentry in fscrypt_file_open
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs update from Mike Marshall:
"Fix out-of-bounds fsid access.
Small fix to quiet warnings from string fortification helpers,
suggested by Arnd Bergmann"
* tag 'for-linus-6.10-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: fix out-of-bounds fsid access
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Properly fix the glock shrinker this time: it broke in commit "gfs2:
Make glock lru list scanning safer" and commit "gfs2: fix glock
shrinker ref issues" wasn't actually enough to fix it
- On unmount, keep glocks around long enough that no more dlm callbacks
can occur on them
- Some more folio conversion patches from Matthew Wilcox
- Lots of other smaller fixes and cleanups
* tag 'gfs2-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (27 commits)
gfs2: make timeout values more explicit
gfs2: Convert gfs2_aspace_writepage() to use a folio
gfs2: Add a migrate_folio operation for journalled files
gfs2: Simplify gfs2_read_super
gfs2: Convert gfs2_page_mkwrite() to use a folio
gfs2: gfs2_freeze_unlock cleanup
gfs2: Remove and replace gfs2_glock_queue_work
gfs2: do_xmote fixes
gfs2: finish_xmote cleanup
gfs2: Unlock fewer glocks on unmount
gfs2: Fix potential glock use-after-free on unmount
gfs2: Remove ill-placed consistency check
gfs2: Fix lru_count accounting
gfs2: Fix "Make glock lru list scanning safer"
Revert "gfs2: fix glock shrinker ref issues"
gfs2: Fix "ignore unlock failures after withdraw"
gfs2: Get rid of unnecessary test_and_set_bit
gfs2: Don't set GLF_LOCK in gfs2_dispose_glock_lru
gfs2: Replace gfs2_glock_queue_put with gfs2_glock_put_async
gfs2: Get rid of gfs2_glock_queue_put in signal_our_withdraw
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This set includes some small fixes, and some big internal changes:
- Fix a long standing race between the unlock callback for the last
lkb struct, and removing the rsb that became unused after the final
unlock. This could lead different nodes to inconsistent info about
the rsb master node.
- Remove unnecessary refcounting on callback structs, returning to
the way things were done in the past.
- Do message processing in softirq context. This allows dlm messages
to be cleared more quickly and efficiently, reducing long lists of
incomplete requests. A future change to run callbacks directly from
this context will make this more effective.
- The softirq message processing involved a number of patches
changing mutexes to spinlocks and rwlocks, and a fair amount of
code re-org in preparation.
- Use an rhashtable for rsb structs, rather than our old internal
hash table implementation. This also required some re-org of lists
and locks preparation for the change.
- Drop the dlm_scand kthread, and use timers to clear unused rsb
structs. Scanning all rsb's periodically was a lot of wasted work.
- Fix recent regression in logic for copying LVB data in user space
lock requests"
* tag 'dlm-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: (34 commits)
dlm: return -ENOMEM if ls_recover_buf fails
dlm: fix sleep in atomic context
dlm: use rwlock for lkbidr
dlm: use rwlock for rsb hash table
dlm: drop dlm_scand kthread and use timers
dlm: do not use ref counts for rsb in the toss state
dlm: switch to use rhashtable for rsbs
dlm: add rsb lists for iteration
dlm: merge toss and keep hash table lists into one list
dlm: change to single hashtable lock
dlm: increment ls_count for dlm_scand
dlm: do message processing in softirq context
dlm: use spin_lock_bh for message processing
dlm: remove schedule in receive path
dlm: convert ls_recv_active from rw_semaphore to rwlock
dlm: avoid blocking receive at the end of recovery
dlm: convert res_lock to spinlock
dlm: convert ls_waiters_mutex to spinlock
dlm: drop mutex use in waiters recovery
dlm: add new struct to save position in dlm_copy_master_names
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This update brings a few minor performance improvements, otherwise
there's a lot of refactoring, cleanups and other sort of not user
visible changes.
Performance improvements:
- inline b-tree locking functions, improvement in metadata-heavy
changes
- relax locking on a range that's being reflinked, allows read
operations to run in parallel
- speed up NOCOW write checks (throughput +9% on a sample test)
- extent locking ranges have been reduced in several places, namely
around delayed ref processing
Core:
- more page to folio conversions:
- relocation
- send
- compression
- inline extent handling
- super block write and wait
- extent_map structure optimizations:
- reduced structure size
- code simplifications
- add shrinker for allocated objects, the numbers can go high and
could exhaust memory on smaller systems (reported) as they may
not get an opportunity to be freed fast enough
- extent locking optimizations:
- reduce locking ranges where it does not seem to be necessary and
are safe due to other means of synchronization
- potential improvements due to lower contention,
allocation/freeing and state management operations of extent
state tracking structures
- delayed ref cleanups and simplifications
- updated trace points
- improved error handling, warnings and assertions
- cleanups and refactoring, unification of error handling paths"
* tag 'for-6.10-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (122 commits)
btrfs: qgroup: fix initialization of auto inherit array
btrfs: count super block write errors in device instead of tracking folio error state
btrfs: use the folio iterator in btrfs_end_super_write()
btrfs: convert super block writes to folio in write_dev_supers()
btrfs: convert super block writes to folio in wait_dev_supers()
bio: Export bio_add_folio_nofail to modules
btrfs: remove duplicate included header from fs.h
btrfs: add a cached state to extent_clear_unlock_delalloc
btrfs: push extent lock down in submit_one_async_extent
btrfs: push lock_extent down in cow_file_range()
btrfs: move can_cow_file_range_inline() outside of the extent lock
btrfs: push lock_extent into cow_file_range_inline
btrfs: push extent lock into cow_file_range
btrfs: push extent lock into run_delalloc_cow
btrfs: remove unlock_extent from run_delalloc_compressed
btrfs: push extent lock down in run_delalloc_nocow
btrfs: adjust while loop condition in run_delalloc_nocow
btrfs: push extent lock into run_delalloc_nocow
btrfs: push the extent lock into btrfs_run_delalloc_range
btrfs: lock extent when doing inline extent in compression
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"The LZ4 global buffer count is now configurable instead of the
previous per-CPU buffers, which is useful for bare metals with
hundreds of CPUs. A reserved buffer pool for LZ4 decompression can
also be enabled to minimize the tail allocation latencies under the
low memory scenarios with heavy memory pressure.
In addition, Zstandard algorithm is now supported as an alternative
since it has been requested by users for a while.
There are some random cleanups as usual.
Summary:
- Make LZ4 global buffers configurable instead of per-CPU buffers
- Add a reserved buffer pool for LZ4 decompression for lower latencies
- Support Zstandard compression algorithm as an alternative
- Derive fsid from on-disk UUID for .statfs() if possible
- Minor cleanups"
* tag 'erofs-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: Zstandard compression support
erofs: clean up z_erofs_load_full_lcluster()
erofs: derive fsid from on-disk UUID for .statfs() if possible
erofs: add a reserved buffer pool for lz4 decompression
erofs: do not use pagepool in z_erofs_gbuf_growsize()
erofs: rename per-CPU buffers to global buffer pool and make it configurable
erofs: rename utils.c to zutil.c
|
|
Write through mode is for cache=none, not for default (when
caching is allowed if we have a lease). Some tests were running
much, much more slowly as a result of disabling caching of
writes by default.
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib")
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Only a handful of changes this cycle, consisting of cleanup work and a
low-prio bugfix:
- Additional cleanup by Tim for the efivarfs variable name length
confusion
- Avoid freeing a bogus pointer when virtual remapping is omitted in
the EFI boot stub"
* tag 'efi-next-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: libstub: only free priv.runtime_map when allocated
efi: Clear up misconceptions about a maximum variable name size
efivarfs: Remove unused internal struct members
Documentation: Mark the 'efivars' sysfs interface as removed
efi: pstore: Request at most 512 bytes for variable names
|
|
In function eventfs_find_events,there is a potential null pointer
that may be caused by calling update_events_attr which will perform
some operations on the members of the ei struct when ei is NULL.
Hence,When ei->is_freed is set,return NULL directly.
Link: https://lore.kernel.org/linux-trace-kernel/20240513053338.63017-1-hao.ge@linux.dev
Cc: stable@vger.kernel.org
Fixes: 8186fff7ab64 ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Rather than pass in flags, error pointer, and whether this is a kernel
invocation or not, add a struct proto_accept_arg struct as the argument.
This then holds all of these arguments, and prepares accept for being
able to pass back more information.
No functional changes in this patch.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix to take the i_rwsem (through the netfs locking wrappers) before taking
cinode->lock_sem.
Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib")
Reported-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
insmod followed by rmmod was oopsing with the new mempools cifs request patch
Fixes: edea94a69730 ("cifs: Add mempools for cifs_io_request and cifs_io_subrequest structs")
Suggested-by: David Howells <dhowells@redhat.com>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.
So, in order to avoid ending up with a flexible-array member in the
middle of multiple other structs, we use the `__struct_group()` helper
to separate the flexible array from the rest of the members in the
flexible structure, and use the tagged `struct create_context_hdr`
instead of `struct create_context`.
So, with these changes, fix 51 of the following warnings[1]:
fs/smb/client/../common/smb2pdu.h:1225:31: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Link: https://gist.github.com/GustavoARSilva/772526a39be3dd4db39e71497f0a9893 [1]
Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"The bulk of the changes here are related to refactoring and expanding
the KUnit tests for string helper and fortify behavior.
Some trivial strncpy replacements in fs/ were carried in my tree. Also
some fixes to SCSI string handling were carried in my tree since the
helper for those was introduce here. Beyond that, just little fixes
all around: objtool getting confused about LKDTM+KCFI, preparing for
future refactors (constification of sysctl tables, additional
__counted_by annotations), a Clang UBSAN+i386 crash fix, and adding
more options in the hardening.config Kconfig fragment.
Summary:
- selftests: Add str*cmp tests (Ivan Orlov)
- __counted_by: provide UAPI for _le/_be variants (Erick Archer)
- Various strncpy deprecation refactors (Justin Stitt)
- stackleak: Use a copy of soon-to-be-const sysctl table (Thomas
Weißschuh)
- UBSAN: Work around i386 -regparm=3 bug with Clang prior to
version 19
- Provide helper to deal with non-NUL-terminated string copying
- SCSI: Fix older string copying bugs (with new helper)
- selftests: Consolidate string helper behavioral tests
- selftests: add memcpy() fortify tests
- string: Add additional __realloc_size() annotations for "dup"
helpers
- LKDTM: Fix KCFI+rodata+objtool confusion
- hardening.config: Enable KCFI"
* tag 'hardening-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (29 commits)
uapi: stddef.h: Provide UAPI macros for __counted_by_{le, be}
stackleak: Use a copy of the ctl_table argument
string: Add additional __realloc_size() annotations for "dup" helpers
kunit/fortify: Fix replaced failure path to unbreak __alloc_size
hardening: Enable KCFI and some other options
lkdtm: Disable CFI checking for perms functions
kunit/fortify: Add memcpy() tests
kunit/fortify: Do not spam logs with fortify WARNs
kunit/fortify: Rename tests to use recommended conventions
init: replace deprecated strncpy with strscpy_pad
kunit/fortify: Fix mismatched kvalloc()/vfree() usage
scsi: qla2xxx: Avoid possible run-time warning with long model_num
scsi: mpi3mr: Avoid possible run-time warning with long manufacturer strings
scsi: mptfusion: Avoid possible run-time warning with long manufacturer strings
fs: ecryptfs: replace deprecated strncpy with strscpy
hfsplus: refactor copy_name to not use strncpy
reiserfs: replace deprecated strncpy with scnprintf
virt: acrn: replace deprecated strncpy with strscpy
ubsan: Avoid i386 UBSAN handler crashes with Clang
ubsan: Remove 1-element array usage in debug reporting
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
- Provide knob to change (previously fixed) coredump NOTES size
(Allen Pais)
- Add sched_prepare_exec tracepoint (Marco Elver)
- Make /proc/$pid/auxv work under binfmt_elf_fdpic (Max Filippov)
- Convert ARCH_HAVE_EXTRA_ELF_NOTES to proper Kconfig (Vignesh
Balasubramanian)
- Leave a gap between .bss and brk
* tag 'execve-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
fs/coredump: Enable dynamic configuration of max file note size
binfmt_elf_fdpic: fix /proc/<pid>/auxv
binfmt_elf: Leave a gap between .bss and brk
Replace macro "ARCH_HAVE_EXTRA_ELF_NOTES" with kconfig
tracing: Add sched_prepare_exec tracepoint
|
|
Pull block updates from Jens Axboe:
- Add a partscan attribute in sysfs, fixing an issue with systemd
relying on an internal interface that went away.
- Attempt #2 at making long running discards interruptible. The
previous attempt went into 6.9, but we ended up mostly reverting it
as it had issues.
- Remove old ida_simple API in bcache
- Support for zoned write plugging, greatly improving the performance
on zoned devices.
- Remove the old throttle low interface, which has been experimental
since 2017 and never made it beyond that and isn't being used.
- Remove page->index debugging checks in brd, as it hasn't caught
anything and prepares us for removing in struct page.
- MD pull request from Song
- Don't schedule block workers on isolated CPUs
* tag 'for-6.10/block-20240511' of git://git.kernel.dk/linux: (84 commits)
blk-throttle: delay initialization until configuration
blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW
block: fix that util can be greater than 100%
block: support to account io_ticks precisely
block: add plug while submitting IO
bcache: fix variable length array abuse in btree_iter
bcache: Remove usage of the deprecated ida_simple_xx() API
md: Revert "md: Fix overflow in is_mddev_idle"
blk-lib: check for kill signal in ioctl BLKDISCARD
block: add a bio_await_chain helper
block: add a blk_alloc_discard_bio helper
block: add a bio_chain_and_submit helper
block: move discard checks into the ioctl handler
block: remove the discard_granularity check in __blkdev_issue_discard
block/ioctl: prefer different overflow check
null_blk: Fix the WARNING: modpost: missing MODULE_DESCRIPTION()
block: fix and simplify blkdevparts= cmdline parsing
block: refine the EOF check in blkdev_iomap_begin
block: add a partscan sysfs attribute for disks
block: add a disk_has_partscan helper
...
|
|
Pull vfs rw iterator updates from Christian Brauner:
"The core fs signalfd, userfaultfd, and timerfd subsystems did still
use f_op->read() instead of f_op->read_iter(). Convert them over since
we should aim to get rid of f_op->read() at some point.
Aside from that io_uring and others want to mark files as FMODE_NOWAIT
so it can make use of per-IO nonblocking hints to enable more
efficient IO. Converting those users to f_op->read_iter() allows them
to be marked with FMODE_NOWAIT"
* tag 'vfs-6.10.rw' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
signalfd: convert to ->read_iter()
userfaultfd: convert to ->read_iter()
timerfd: convert to ->read_iter()
new helper: copy_to_iter_full()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"This reworks the netfslib writeback implementation so that pages read
from the cache are written to the cache through ->writepages(),
thereby allowing the fscache page flag to be retired.
The reworking also:
- builds on top of the new writeback_iter() infrastructure
- makes it possible to use vectored write RPCs as discontiguous
streams of pages can be accommodated
- makes it easier to do simultaneous content crypto and stream
division
- provides support for retrying writes and re-dividing a stream
- replaces the ->launder_folio() op, so that ->writepages() is used
instead
- uses mempools to allocate the netfs_io_request and
netfs_io_subrequest structs to avoid allocation failure in the
writeback path
Some code that uses the fscache page flag is retained for
compatibility purposes with nfs and ceph. The code is switched to
using the synonymous private_2 label instead and marked with
deprecation comments.
The merge commit contains additional details on the new algorithm that
I've left out of here as it would probably be excessively detailed.
On top of the netfslib infrastructure this contains the work to
convert cifs over to netfslib"
* tag 'vfs-6.10.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (38 commits)
cifs: Enable large folio support
cifs: Remove some code that's no longer used, part 3
cifs: Remove some code that's no longer used, part 2
cifs: Remove some code that's no longer used, part 1
cifs: Cut over to using netfslib
cifs: Implement netfslib hooks
cifs: Make add_credits_and_wake_if() clear deducted credits
cifs: Add mempools for cifs_io_request and cifs_io_subrequest structs
cifs: Set zero_point in the copy_file_range() and remap_file_range()
cifs: Move cifs_loose_read_iter() and cifs_file_write_iter() to file.c
cifs: Replace the writedata replay bool with a netfs sreq flag
cifs: Make wait_mtu_credits take size_t args
cifs: Use more fields from netfs_io_subrequest
cifs: Replace cifs_writedata with a wrapper around netfs_io_subrequest
cifs: Replace cifs_readdata with a wrapper around netfs_io_subrequest
cifs: Use alternative invalidation to using launder_folio
netfs, afs: Use writeback retry to deal with alternate keys
netfs: Miscellaneous tidy ups
netfs: Remove the old writeback code
netfs: Cut over to using new writeback code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount API conversions from Christian Brauner:
"This converts qnx6, minix, debugfs, tracefs, freevxfs, and openpromfs
to the new mount api, further reducing the number of filesystems
relying on the legacy mount api"
* tag 'vfs-6.10.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
minix: convert minix to use the new mount api
vfs: Convert tracefs to use the new mount API
vfs: Convert debugfs to use the new mount API
openpromfs: finish conversion to the new mount API
freevxfs: Convert freevxfs to the new mount API.
qnx6: convert qnx6 to use the new mount api
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Free up FMODE_* bits. I've freed up bits 6, 7, 8, and 24. That
means we now have six free FMODE_* bits in total (but bit #6
already got used for FMODE_WRITE_RESTRICTED)
- Add FOP_HUGE_PAGES flag (follow-up to FMODE_* cleanup)
- Add fd_raw cleanup class so we can make use of automatic cleanup
provided by CLASS(fd_raw, f)(fd) for O_PATH fds as well
- Optimize seq_puts()
- Simplify __seq_puts()
- Add new anon_inode_getfile_fmode() api to allow specifying f_mode
instead of open-coding it in multiple places
- Annotate struct file_handle with __counted_by() and use
struct_size()
- Warn in get_file() whether f_count resurrection from zero is
attempted (epoll/drm discussion)
- Folio-sophize aio
- Export the subvolume id in statx() for both btrfs and bcachefs
- Relax linkat(AT_EMPTY_PATH) requirements
- Add F_DUPFD_QUERY fcntl() allowing to compare two file descriptors
for dup*() equality replacing kcmp()
Cleanups:
- Compile out swapfile inode checks when swap isn't enabled
- Use (1 << n) notation for FMODE_* bitshifts for clarity
- Remove redundant variable assignment in fs/direct-io
- Cleanup uses of strncpy in orangefs
- Speed up and cleanup writeback
- Move fsparam_string_empty() helper into header since it's currently
open-coded in multiple places
- Add kernel-doc comments to proc_create_net_data_write()
- Don't needlessly read dentry->d_flags twice
Fixes:
- Fix out-of-range warning in nilfs2
- Fix ecryptfs overflow due to wrong encryption packet size
calculation
- Fix overly long line in xfs file_operations (follow-up to FMODE_*
cleanup)
- Don't raise FOP_BUFFER_{R,W}ASYNC for directories in xfs (follow-up
to FMODE_* cleanup)
- Don't call xfs_file_open from xfs_dir_open (follow-up to FMODE_*
cleanup)
- Fix stable offset api to prevent endless loops
- Fix afs file server rotations
- Prevent xattr node from overflowing the eraseblock in jffs2
- Move fdinfo PTRACE_MODE_READ procfs check into the .permission()
operation instead of .open() operation since this caused userspace
regressions"
* tag 'vfs-6.10.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (39 commits)
afs: Fix fileserver rotation getting stuck
selftests: add F_DUPDFD_QUERY selftests
fcntl: add F_DUPFD_QUERY fcntl()
file: add fd_raw cleanup class
fs: WARN when f_count resurrection is attempted
seq_file: Simplify __seq_puts()
seq_file: Optimize seq_puts()
proc: Move fdinfo PTRACE_MODE_READ check into the inode .permission operation
fs: Create anon_inode_getfile_fmode()
xfs: don't call xfs_file_open from xfs_dir_open
xfs: drop fop_flags for directories
xfs: fix overly long line in the file_operations
shmem: Fix shmem_rename2()
libfs: Add simple_offset_rename() API
libfs: Fix simple_offset_rename_exchange()
jffs2: prevent xattr node from overflowing the eraseblock
vfs, swap: compile out IS_SWAPFILE() on swapless configs
vfs: relax linkat() AT_EMPTY_PATH - aka flink() - requirements
fs/direct-io: remove redundant assignment to variable retval
fs/dcache: Re-use value stored to dentry->d_flags instead of re-reading
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs iomap updates from Christian Brauner:
"This contains a few cleanups to the iomap code. Nothing particularly
stands out"
* tag 'vfs-6.10.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: do some small logical cleanup in buffered write
iomap: make iomap_write_end() return a boolean
iomap: use a new variable to handle the written bytes in iomap_write_iter()
iomap: don't increase i_size if it's not a write operation
iomap: drop the write failure handles when unsharing and zeroing
iomap: convert iomap_writepages to writeack_iter
|
|
Landlock's IOCTL support needs to partially replicate the list of
IOCTLs from do_vfs_ioctl(). The list of commands implemented in
do_vfs_ioctl() should be kept in sync with Landlock's IOCTL policies.
Suggested-by: Paul Moore <paul@paul-moore.com>
Suggested-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20240419161122.2023765-12-gnoack@google.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
This patch fixes generic/011 when oplocks is enable.
Avoid to send duplicate oplock break notifications like smb2 leases
case.
Fixes: 97c2ec64667b ("ksmbd: avoid to send duplicate lease break notifications")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
During the stress testing of the jffs2 file system,the following
abnormal printouts were found:
[ 2430.649000] Unable to handle kernel paging request at virtual address 0069696969696948
[ 2430.649622] Mem abort info:
[ 2430.649829] ESR = 0x96000004
[ 2430.650115] EC = 0x25: DABT (current EL), IL = 32 bits
[ 2430.650564] SET = 0, FnV = 0
[ 2430.650795] EA = 0, S1PTW = 0
[ 2430.651032] FSC = 0x04: level 0 translation fault
[ 2430.651446] Data abort info:
[ 2430.651683] ISV = 0, ISS = 0x00000004
[ 2430.652001] CM = 0, WnR = 0
[ 2430.652558] [0069696969696948] address between user and kernel address ranges
[ 2430.653265] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 2430.654512] CPU: 2 PID: 20919 Comm: cat Not tainted 5.15.25-g512f31242bf6 #33
[ 2430.655008] Hardware name: linux,dummy-virt (DT)
[ 2430.655517] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 2430.656142] pc : kfree+0x78/0x348
[ 2430.656630] lr : jffs2_free_inode+0x24/0x48
[ 2430.657051] sp : ffff800009eebd10
[ 2430.657355] x29: ffff800009eebd10 x28: 0000000000000001 x27: 0000000000000000
[ 2430.658327] x26: ffff000038f09d80 x25: 0080000000000000 x24: ffff800009d38000
[ 2430.658919] x23: 5a5a5a5a5a5a5a5a x22: ffff000038f09d80 x21: ffff8000084f0d14
[ 2430.659434] x20: ffff0000bf9a6ac0 x19: 0169696969696940 x18: 0000000000000000
[ 2430.659969] x17: ffff8000b6506000 x16: ffff800009eec000 x15: 0000000000004000
[ 2430.660637] x14: 0000000000000000 x13: 00000001000820a1 x12: 00000000000d1b19
[ 2430.661345] x11: 0004000800000000 x10: 0000000000000001 x9 : ffff8000084f0d14
[ 2430.662025] x8 : ffff0000bf9a6b40 x7 : ffff0000bf9a6b48 x6 : 0000000003470302
[ 2430.662695] x5 : ffff00002e41dcc0 x4 : ffff0000bf9aa3b0 x3 : 0000000003470342
[ 2430.663486] x2 : 0000000000000000 x1 : ffff8000084f0d14 x0 : fffffc0000000000
[ 2430.664217] Call trace:
[ 2430.664528] kfree+0x78/0x348
[ 2430.664855] jffs2_free_inode+0x24/0x48
[ 2430.665233] i_callback+0x24/0x50
[ 2430.665528] rcu_do_batch+0x1ac/0x448
[ 2430.665892] rcu_core+0x28c/0x3c8
[ 2430.666151] rcu_core_si+0x18/0x28
[ 2430.666473] __do_softirq+0x138/0x3cc
[ 2430.666781] irq_exit+0xf0/0x110
[ 2430.667065] handle_domain_irq+0x6c/0x98
[ 2430.667447] gic_handle_irq+0xac/0xe8
[ 2430.667739] call_on_irq_stack+0x28/0x54
The parameter passed to kfree was 5a5a5a5a, which corresponds to the target field of
the jffs_inode_info structure. It was found that all variables in the jffs_inode_info
structure were 5a5a5a5a, except for the first member sem. It is suspected that these
variables are not initialized because they were set to 5a5a5a5a during memory testing,
which is meant to detect uninitialized memory.The sem variable is initialized in the
function jffs2_i_init_once, while other members are initialized in
the function jffs2_init_inode_info.
The function jffs2_init_inode_info is called after iget_locked,
but in the iget_locked function, the destroy_inode process is triggered,
which releases the inode and consequently, the target member of the inode
is not initialized.In concurrent high pressure scenarios, iget_locked
may enter the destroy_inode branch as described in the code.
Since the destroy_inode functionality of jffs2 only releases the target,
the fix method is to set target to NULL in jffs2_i_init_once.
Signed-off-by: Wang Yong <wang.yong12@zte.com.cn>
Reviewed-by: Lu Zhongjun <lu.zhongjun@zte.com.cn>
Reviewed-by: Yang Tao <yang.tao172@zte.com.cn>
Cc: Xu Xin <xu.xin16@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
And change cache name from 'jffs2_tmp_dnode' to 'jffs2_tmp_dnode_info'.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Update the end of one sentence where a comment was truncated. (dwmw2)
Fix a bunch of kernel-doc warnings:
nodemgmt.c:72: warning: Function parameter or member 'sumsize' not described in 'jffs2_do_reserve_space'
nodemgmt.c:72: warning: expecting prototype for jffs2_reserve_space(). Prototype was for jffs2_do_reserve_space() instead
nodemgmt.c:76: warning: Function parameter or member 'sumsize' not described in 'jffs2_reserve_space'
nodemgmt.c:76: warning: No description found for return value of 'jffs2_reserve_space'
nodemgmt.c:503: warning: Function parameter or member 'ofs' not described in 'jffs2_add_physical_node_ref'
nodemgmt.c:503: warning: Function parameter or member 'ic' not described in 'jffs2_add_physical_node_ref'
nodemgmt.c:503: warning: Excess function parameter 'new' description in 'jffs2_add_physical_node_ref'
nodemgmt.c:503: warning: No description found for return value of 'jffs2_add_physical_node_ref'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-mtd@lists.infradead.org
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Utilize the %pe print specifier to get the symbolic error name as a
string (i.e "-ENOMEM") in the log message instead of the error code to
increase its readablility.
This change was suggested in
https://lore.kernel.org/all/92972476-0b1f-4d0a-9951-af3fc8bc6e65@suswa.mountain/
Signed-off-by: Christian Heusel <christian@heusel.eu>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
While taking a kernel core dump with makedumpfile on a larger system,
softlockup messages often appear.
While softlockup warnings can be harmless, they can also interfere with
things like RCU freeing memory, which can be problematic when the kdump
kexec image is configured with as little memory as possible.
Avoid the softlockup, and give things like work items and RCU a chance to
do their thing during __read_vmcore by adding a cond_resched.
Link: https://lkml.kernel.org/r/20240507091858.36ff767f@imladris.surriel.com
Signed-off-by: Rik van Riel <riel@surriel.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The BUG_ON check performed on the return value of __getblk() in
nilfs_finish_roll_forward() assumes that a buffer that has been
successfully read once is retrieved with the same parameters and does not
fail (__getblk() does not return an error due to memory allocation
failure). Also, nilfs_finish_roll_forward() is called at most once during
mount.
Taking these into consideration, rewrite the check to use WARN_ON() to
avoid using BUG_ON().
Link: https://lkml.kernel.org/r/20240508221429.7559-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Nobody checks this flag on nilfs2 folios, stop setting and clearing it.
That lets us simplify nilfs_end_folio_io() slightly.
Link: https://lkml.kernel.org/r/20240420025029.2166544-17-willy@infradead.org
Link: https://lkml.kernel.org/r/20240430050901.3239-1-konishi.ryusuke@gmail.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
net-accept-more
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1557 commits)
net: qede: use extack in qede_parse_actions()
net: qede: propagate extack through qede_flow_spec_validate()
net: qede: use faked extack in qede_flow_spec_to_rule()
net: qede: use extack in qede_parse_flow_attr()
net: qede: add extack in qede_add_tc_flower_fltr()
net: qede: use extack in qede_flow_parse_udp_v4()
net: qede: use extack in qede_flow_parse_udp_v6()
net: qede: use extack in qede_flow_parse_tcp_v4()
net: qede: use extack in qede_flow_parse_tcp_v6()
net: qede: use extack in qede_flow_parse_v4_common()
net: qede: use extack in qede_flow_parse_v6_common()
net: qede: use extack in qede_set_v4_tuple_to_profile()
net: qede: use extack in qede_set_v6_tuple_to_profile()
net: qede: use extack in qede_flow_parse_ports()
net: usb: smsc95xx: stop lying about skb->truesize
net: dsa: microchip: Fix spellig mistake "configur" -> "configure"
af_unix: Add dead flag to struct scm_fp_list.
net: ethernet: adi: adin1110: Replace linux/gpio.h by proper one
octeontx2-pf: Reuse Transmit queue/Send queue index of HTB class
gve: Use ethtool_sprintf/puts() to fill stats strings
...
|
|
During gc_data_segment(), if inode state is abnormal, it missed to call
iput(), fix it.
Fixes: b73e52824c89 ("f2fs: reposition unlock_new_inode to prevent accessing invalid inode")
Fixes: 9056d6489f5a ("f2fs: fix to do sanity check on inode type during garbage collection")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Following the semantic for dirty segments in checkpoint disabled mode,
apply the same rule to dirty sections.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
