| Age | Commit message (Collapse) | Author |
|---|
|
When we call xfs_forced_shutdown(), the caller often expects the
filesystem to be completely shut down when it returns. However,
if we have racing xfs_forced_shutdown() calls, the first caller sets
the mount shutdown flag then goes to shutdown the log. The second
caller sees the mount shutdown flag and returns immediately - it
does not wait for the log to be shut down.
Unfortunately, xfs_forced_shutdown() is used in some places that
expect it to completely shut down the filesystem before it returns
(e.g. xfs_trans_log_inode()). As such, returning before the log has
been shut down leaves us in a place where the transaction failed to
complete correctly but we still call xfs_trans_commit(). This
situation arises because xfs_trans_log_inode() does not return an
error and instead calls xfs_force_shutdown() to ensure that the
transaction being committed is aborted.
Unfortunately, we have a race condition where xfs_trans_commit()
needs to check xlog_is_shutdown() because it can't abort log items
before the log is shut down, but it needs to use xfs_is_shutdown()
because xfs_forced_shutdown() does not block waiting for the log to
shut down.
To fix this conundrum, first we make all calls to
xfs_forced_shutdown() block until the log is also shut down. This
means we can then safely use xfs_forced_shutdown() as a mechanism
that ensures the currently running transaction will be aborted by
xfs_trans_commit() regardless of the shutdown check it uses.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
We've got a mess on our hands.
1. xfs_trans_commit() cannot cancel transactions because the mount is
shut down - that causes dirty, aborted, unlogged log items to sit
unpinned in memory and potentially get written to disk before the
log is shut down. Hence xfs_trans_commit() can only abort
transactions when xlog_is_shutdown() is true.
2. xfs_force_shutdown() is used in places to cause the current
modification to be aborted via xfs_trans_commit() because it may be
impractical or impossible to cancel the transaction directly, and
hence xfs_trans_commit() must cancel transactions when
xfs_is_shutdown() is true in this situation. But we can't do that
because of #1.
3. Log IO errors cause log shutdowns by calling xfs_force_shutdown()
to shut down the mount and then the log from log IO completion.
4. xfs_force_shutdown() can result in a log force being issued,
which has to wait for log IO completion before it will mark the log
as shut down. If #3 races with some other shutdown trigger that runs
a log force, we rely on xfs_force_shutdown() silently ignoring #3
and avoiding shutting down the log until the failed log force
completes.
5. To ensure #2 always works, we have to ensure that
xfs_force_shutdown() does not return until the the log is shut down.
But in the case of #4, this will result in a deadlock because the
log Io completion will block waiting for a log force to complete
which is blocked waiting for log IO to complete....
So the very first thing we have to do here to untangle this mess is
dissociate log shutdown triggers from mount shutdowns. We already
have xlog_forced_shutdown, which will atomically transistion to the
log a shutdown state. Due to internal asserts it cannot be called
multiple times, but was done simply because the only place that
could call it was xfs_do_force_shutdown() (i.e. the mount shutdown!)
and that could only call it once and once only. So the first thing
we do is remove the asserts.
We then convert all the internal log shutdown triggers to call
xlog_force_shutdown() directly instead of xfs_force_shutdown(). This
allows the log shutdown triggers to shut down the log without
needing to care about mount based shutdown constraints. This means
we shut down the log independently of the mount and the mount may
not notice this until it's next attempt to read or modify metadata.
At that point (e.g. xfs_trans_commit()) it will see that the log is
shutdown, error out and shutdown the mount.
To ensure that all the unmount behaviours and asserts track
correctly as a result of a log shutdown, propagate the shutdown up
to the mount if it is not already set. This keeps the mount and log
state in sync, and saves a huge amount of hassle where code fails
because of a log shutdown but only checks for mount shutdowns and
hence ends up doing the wrong thing. Cleaning up that mess is
an exercise for another day.
This enables us to address the other problems noted above in
followup patches.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Brian reported a null pointer dereference failure during unmount in
xfs/006. He tracked the problem down to the AIL being torn down
before a log shutdown had completed and removed all the items from
the AIL. The failure occurred in this path while unmount was
proceeding in another task:
xfs_trans_ail_delete+0x102/0x130 [xfs]
xfs_buf_item_done+0x22/0x30 [xfs]
xfs_buf_ioend+0x73/0x4d0 [xfs]
xfs_trans_committed_bulk+0x17e/0x2f0 [xfs]
xlog_cil_committed+0x2a9/0x300 [xfs]
xlog_cil_process_committed+0x69/0x80 [xfs]
xlog_state_shutdown_callbacks+0xce/0xf0 [xfs]
xlog_force_shutdown+0xdf/0x150 [xfs]
xfs_do_force_shutdown+0x5f/0x150 [xfs]
xlog_ioend_work+0x71/0x80 [xfs]
process_one_work+0x1c5/0x390
worker_thread+0x30/0x350
kthread+0xd7/0x100
ret_from_fork+0x1f/0x30
This is processing an EIO error to a log write, and it's
triggering a force shutdown. This causes the log to be shut down,
and then it is running attached iclog callbacks from the shutdown
context. That means the fs and log has already been marked as
xfs_is_shutdown/xlog_is_shutdown and so high level code will abort
(e.g. xfs_trans_commit(), xfs_log_force(), etc) with an error
because of shutdown.
The umount would have been blocked waiting for a log force
completion inside xfs_log_cover() -> xfs_sync_sb(). The first thing
for this situation to occur is for xfs_sync_sb() to exit without
waiting for the iclog buffer to be comitted to disk. The
above trace is the completion routine for the iclog buffer, and
it is shutting down the filesystem.
xlog_state_shutdown_callbacks() does this:
{
struct xlog_in_core *iclog;
LIST_HEAD(cb_list);
spin_lock(&log->l_icloglock);
iclog = log->l_iclog;
do {
if (atomic_read(&iclog->ic_refcnt)) {
/* Reference holder will re-run iclog callbacks. */
continue;
}
list_splice_init(&iclog->ic_callbacks, &cb_list);
>>>>>> wake_up_all(&iclog->ic_write_wait);
>>>>>> wake_up_all(&iclog->ic_force_wait);
} while ((iclog = iclog->ic_next) != log->l_iclog);
wake_up_all(&log->l_flush_wait);
spin_unlock(&log->l_icloglock);
>>>>>> xlog_cil_process_committed(&cb_list);
}
This wakes any thread waiting on IO completion of the iclog (in this
case the umount log force) before shutdown processes all the pending
callbacks. That means the xfs_sync_sb() waiting on a sync
transaction in xfs_log_force() on iclog->ic_force_wait will get
woken before the callbacks attached to that iclog are run. This
results in xfs_sync_sb() returning an error, and so unmount unblocks
and continues to run whilst the log shutdown is still in progress.
Normally this is just fine because the force waiter has nothing to
do with AIL operations. But in the case of this unmount path, the
log force waiter goes on to tear down the AIL because the log is now
shut down and so nothing ever blocks it again from the wait point in
xfs_log_cover().
Hence it's a race to see who gets to the AIL first - the unmount
code or xlog_cil_process_committed() killing the superblock buffer.
To fix this, we just have to change the order of processing in
xlog_state_shutdown_callbacks() to run the callbacks before it wakes
any task waiting on completion of the iclog.
Reported-by: Brian Foster <bfoster@redhat.com>
Fixes: aad7272a9208 ("xfs: separate out log shutdown callback processing")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
generic/388 triggered a failure in RUI recovery due to a corrupted
btree record and the system then locked up hard due to a subsequent
assert failure while holding a spinlock cancelling intents:
XFS (pmem1): Corruption of in-memory data (0x8) detected at xfs_do_force_shutdown+0x1a/0x20 (fs/xfs/xfs_trans.c:964). Shutting down filesystem.
XFS (pmem1): Please unmount the filesystem and rectify the problem(s)
XFS: Assertion failed: !xlog_item_is_intent(lip), file: fs/xfs/xfs_log_recover.c, line: 2632
Call Trace:
<TASK>
xlog_recover_cancel_intents.isra.0+0xd1/0x120
xlog_recover_finish+0xb9/0x110
xfs_log_mount_finish+0x15a/0x1e0
xfs_mountfs+0x540/0x910
xfs_fs_fill_super+0x476/0x830
get_tree_bdev+0x171/0x270
? xfs_init_fs_context+0x1e0/0x1e0
xfs_fs_get_tree+0x15/0x20
vfs_get_tree+0x24/0xc0
path_mount+0x304/0xba0
? putname+0x55/0x60
__x64_sys_mount+0x108/0x140
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Essentially, there's dirty metadata in the AIL from intent recovery
transactions, so when we go to cancel the remaining intents we assume
that all objects after the first non-intent log item in the AIL are
not intents.
This is not true. Intent recovery can log new intents to continue
the operations the original intent could not complete in a single
transaction. The new intents are committed before they are deferred,
which means if the CIL commits in the background they will get
inserted into the AIL at the head.
Hence if we shut down the filesystem while processing intent
recovery, the AIL may have new intents active at the current head.
Hence this check:
/*
* We're done when we see something other than an intent.
* There should be no intents left in the AIL now.
*/
if (!xlog_item_is_intent(lip)) {
#ifdef DEBUG
for (; lip; lip = xfs_trans_ail_cursor_next(ailp, &cur))
ASSERT(!xlog_item_is_intent(lip));
#endif
break;
}
in both xlog_recover_process_intents() and
log_recover_cancel_intents() is simply not valid. It was valid back
when we only had EFI/EFD intents and didn't chain intents, but it
hasn't been valid ever since intent recovery could create and commit
new intents.
Given that crashing the mount task like this pretty much prevents
diagnosing what went wrong that lead to the initial failure that
triggered intent cancellation, just remove the checks altogether.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Most buffer io list operations are run with the bp->b_lock held, but
xfs_iflush_abort() can be called without the buffer lock being held
resulting in inodes being removed from the buffer list while other
list operations are occurring. This causes problems with corrupted
bp->b_io_list inode lists during filesystem shutdown, leading to
traversals that never end, double removals from the AIL, etc.
Fix this by passing the buffer to xfs_iflush_abort() if we have
it locked. If the inode is attached to the buffer, we're going to
have to remove it from the buffer list and we'd have to get the
buffer off the inode log item to do that anyway.
If we don't have a buffer passed in (e.g. from xfs_reclaim_inode())
then we can determine if the inode has a log item and if it is
attached to a buffer before we do anything else. If it does have an
attached buffer, we can lock it safely (because the inode has a
reference to it) and then perform the inode abort.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Pull jfs updates from Dave Kleikamp:
"A couple bug fixes"
* tag 'jfs-5.18' of https://github.com/kleikamp/linux-shaggy:
jfs: prevent NULL deref in diFree
jfs: fix divide error in dbNextAG
|
|
This has always been the rule: fdtables have several bitmaps in them,
and as a result they have to be sized properly for bitmaps. We walk
those bitmaps in chunks of 'unsigned long' in serveral cases, but even
when we don't, we use the regular kernel bitops that are defined to work
on arrays of 'unsigned long', not on some byte array.
Now, the distinction between arrays of bytes and 'unsigned long'
normally only really ends up being noticeable on big-endian systems, but
Fedor Pchelkin and Alexey Khoroshilov reported that copy_fd_bitmaps()
could be called with an argument that wasn't even a multiple of
BITS_PER_BYTE. And then it fails to do the proper copy even on
little-endian machines.
The bug wasn't in copy_fd_bitmap(), but in sane_fdtable_size(), which
didn't actually sanitize the fdtable size sufficiently, and never made
sure it had the proper BITS_PER_LONG alignment.
That's partly because the alignment historically came not from having to
explicitly align things, but simply from previous fdtable sizes, and
from count_open_files(), which counts the file descriptors by walking
them one 'unsigned long' word at a time and thus naturally ends up doing
sizing in the proper 'chunks of unsigned long'.
But with the introduction of close_range(), we now have an external
source of "this is how many files we want to have", and so
sane_fdtable_size() needs to do a better job.
This also adds that explicit alignment to alloc_fdtable(), although
there it is mainly just for documentation at a source code level. The
arithmetic we do there to pick a reasonable fdtable size already aligns
the result sufficiently.
In fact,clang notices that the added ALIGN() in that function doesn't
actually do anything, and does not generate any extra code for it.
It turns out that gcc ends up confusing itself by combining a previous
constant-sized shift operation with the variable-sized shift operations
in roundup_pow_of_two(). And probably due to that doesn't notice that
the ALIGN() is a no-op. But that's a (tiny) gcc misfeature that doesn't
matter. Having the explicit alignment makes sense, and would actually
matter on a 128-bit architecture if we ever go there.
This also adds big comments above both functions about how fdtable sizes
have to have that BITS_PER_LONG alignment.
Fixes: 60997c3d45d9 ("close_range: add CLOSE_RANGE_UNSHARE")
Reported-by: Fedor Pchelkin <aissur0002@gmail.com>
Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Link: https://lore.kernel.org/all/20220326114009.1690-1-aissur0002@gmail.com/
Tested-and-acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In preparation for not using the file at prep time, defer checking if this
file refers to a valid io_uring instance until issue time.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We must always call req_set_fail() if the request is failed, otherwise
we won't sever links for dependent chains correctly.
Fixes: 4f57f06ce218 ("io_uring: add support for IORING_OP_MSG_RING command")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace cleanups from Eric Biederman:
"This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was around
task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the
semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where anything left in tracehook.h was
some weird strange thing that was difficult to understand"
* tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ptrace: Remove duplicated include in ptrace.c
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
ptrace: Return the signal to continue with from ptrace_stop
ptrace: Move setting/clearing ptrace_message into ptrace_stop
tracehook: Remove tracehook.h
resume_user_mode: Move to resume_user_mode.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Introduce task_work_pending
task_work: Remove unnecessary include from posix_timers.h
ptrace: Remove tracehook_signal_handler
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Move ptrace_report_syscall into ptrace.h
|
|
Currently the way the tid (tree connection) status is tracked
is confusing. The same enum is used for structs cifs_tcon
and cifs_ses and TCP_Server_info, but each of these three has
different states that they transition among. The current
code also unnecessarily uses camelCase.
Convert from use of statusEnum to a new tid_status_enum for
tree connections. The valid states for a tid are:
TID_NEW = 0,
TID_GOOD,
TID_EXITING,
TID_NEED_RECON,
TID_NEED_TCON,
TID_IN_TCON,
TID_NEED_FILES_INVALIDATE, /* unused, considering removing in future */
TID_IN_FILES_INVALIDATE
It also removes CifsNeedTcon, CifsInTcon, CifsNeedFilesInvalidate and
CifsInFilesInvalidate from the statusEnum used for session and
TCP_Server_Info since they are not relevant for those.
A follow on patch will fix the places where we use the
tcon->need_reconnect flag to be more consistent with the tid->status.
Also fixes a bug that was:
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.18-rc1.
Not much here, primarily it was a bunch of cleanups and small updates:
- kobj_type cleanups for default_groups
- documentation updates
- firmware loader minor changes
- component common helper added and take advantage of it in many
drivers (the largest part of this pull request).
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits)
Documentation: update stable review cycle documentation
drivers/base/dd.c : Remove the initial value of the global variable
Documentation: update stable tree link
Documentation: add link to stable release candidate tree
devres: fix typos in comments
Documentation: add note block surrounding security patch note
samples/kobject: Use sysfs_emit instead of sprintf
base: soc: Make soc_device_match() simpler and easier to read
driver core: dd: fix return value of __setup handler
driver core: Refactor sysfs and drv/bus remove hooks
driver core: Refactor multiple copies of device cleanup
scripts: get_abi.pl: Fix typo in help message
kernfs: fix typos in comments
kernfs: remove unneeded #if 0 guard
ALSA: hda/realtek: Make use of the helper component_compare_dev_name
video: omapfb: dss: Make use of the helper component_compare_dev
power: supply: ab8500: Make use of the helper component_compare_dev
ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of
iommu/mediatek: Make use of the helper component_compare/release_of
drm: of: Make use of the helper component_release_of
...
|
|
On a modern filesystem, we don't allow userspace to allocate blocks for
data storage from the per-AG space reservations, the user-controlled
reservation pool that prevents ENOSPC in the middle of internal
operations, or the internal per-AG set-aside that prevents unwanted
filesystem shutdowns due to ENOSPC during a bmap btree split.
Since we now consider freespace btree blocks as unavailable for
allocation for data storage, we shouldn't report those blocks via statfs
either. This makes the numbers that we return via the statfs f_bavail
and f_bfree fields a more conservative estimate of actual free space.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Due to cycling of m_sb_lock, it's possible for multiple callers of
xfs_reserve_blocks to race at changing the pool size, subtracting blocks
from fdblocks, and actually putting it in the pool. The result of all
this is that we can overfill the reserve pool to hilarious levels.
xfs_mod_fdblocks, when called with a positive value, already knows how
to take freed blocks and either fill the reserve until it's full, or put
them in fdblocks. Use that instead of setting m_resblks_avail directly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Nowadays, xfs_mod_fdblocks will always choose to fill the reserve pool
with freed blocks before adding to fdblocks. Therefore, we can change
the behavior of xfs_reserve_blocks slightly -- setting the target size
of the pool should always succeed, since a deficiency will eventually
be made up as blocks get freed.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Infinite loops in kernel code are scary. Calls to xfs_reserve_blocks
should be rare (people should just use the defaults!) so we really don't
need to try so hard. Simplify the logic here by removing the infinite
loop.
Cc: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
xfs_reserve_blocks controls the size of the user-visible free space
reserve pool. Given the difference between the current and requested
pool sizes, it will try to reserve free space from fdblocks. However,
the amount requested from fdblocks is also constrained by the amount of
space that we think xfs_mod_fdblocks will give us. If we forget to
subtract m_allocbt_blks before calling xfs_mod_fdblocks, it will will
return ENOSPC and we'll hang the kernel at mount due to the infinite
loop.
In commit fd43cf600cf6, we decided that xfs_mod_fdblocks should not hand
out the "free space" used by the free space btrees, because some portion
of the free space btrees hold in reserve space for future btree
expansion. Unfortunately, xfs_reserve_blocks' estimation of the number
of blocks that it could request from xfs_mod_fdblocks was not updated to
include m_allocbt_blks, so if space is extremely low, the caller hangs.
Fix this by creating a function to estimate the number of blocks that
can be reserved from fdblocks, which needs to exclude the set-aside and
m_allocbt_blks.
Found by running xfs/306 (which formats a single-AG 20MB filesystem)
with an fstests configuration that specifies a 1k blocksize and a
specially crafted log size that will consume 7/8 of the space (17920
blocks, specifically) in that AG.
Cc: Brian Foster <bfoster@redhat.com>
Fixes: fd43cf600cf6 ("xfs: set aside allocation btree blocks from block reservation")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
In nfs4_callback_devicenotify(), if we don't find a matching entry for
the deviceid, we're left with a pointer to 'struct nfs_server' that
actually points to the list of super blocks associated with our struct
nfs_client.
Furthermore, even if we have a valid pointer, nothing pins the super
block, and so the struct nfs_server could end up getting freed while
we're using it.
Since all we want is a pointer to the struct pnfs_layoutdriver_type,
let's skip all the iteration over super blocks, and just use APIs to
find the layout driver directly.
Reported-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Fixes: 1be5683b03a7 ("pnfs: CB_NOTIFY_DEVICEID")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Return boolean values ("true" or "false") instead of 1 or 0 from bool
functions. This fixes the following warnings from coccicheck:
./fs/nfsd/nfs2acl.c:289:9-10: WARNING: return of 0/1 in function
'nfsaclsvc_encode_accessres' with return type bool
./fs/nfsd/nfs2acl.c:252:9-10: WARNING: return of 0/1 in function
'nfsaclsvc_encode_getaclres' with return type bool
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CET-IBT (Control-Flow-Integrity) support from Peter Zijlstra:
"Add support for Intel CET-IBT, available since Tigerlake (11th gen),
which is a coarse grained, hardware based, forward edge
Control-Flow-Integrity mechanism where any indirect CALL/JMP must
target an ENDBR instruction or suffer #CP.
Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation
is limited to 2 instructions (and typically fewer) on branch targets
not starting with ENDBR. CET-IBT also limits speculation of the next
sequential instruction after the indirect CALL/JMP [1].
CET-IBT is fundamentally incompatible with retpolines, but provides,
as described above, speculation limits itself"
[1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html
* tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
kvm/emulate: Fix SETcc emulation for ENDBR
x86/Kconfig: Only allow CONFIG_X86_KERNEL_IBT with ld.lld >= 14.0.0
x86/Kconfig: Only enable CONFIG_CC_HAS_IBT for clang >= 14.0.0
kbuild: Fixup the IBT kbuild changes
x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy
x86: Remove toolchain check for X32 ABI capability
x86/alternative: Use .ibt_endbr_seal to seal indirect calls
objtool: Find unused ENDBR instructions
objtool: Validate IBT assumptions
objtool: Add IBT/ENDBR decoding
objtool: Read the NOENDBR annotation
x86: Annotate idtentry_df()
x86,objtool: Move the ASM_REACHABLE annotation to objtool.h
x86: Annotate call_on_stack()
objtool: Rework ASM_REACHABLE
x86: Mark __invalid_creds() __noreturn
exit: Mark do_group_exit() __noreturn
x86: Mark stop_this_cpu() __noreturn
objtool: Ignore extra-symbol code
objtool: Rename --duplicate to --lto
...
|
|
Includes moving to common code (from cifs and ksmbd protocol related
headers)
- query and query directory info levels and structs
- set info structs
- SMB2 lock struct and flags
- SMB2 echo req
Also shorten a few flag names (e.g. SMB2_LOCKFLAG_EXCLUSIVE_LOCK
to SMB2_LOCKFLAG_EXCLUSIVE)
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The definitions for the ioctl SMB3 request and response as well
as length of various fields defined in the protocol documentation
were duplicated in fs/ksmbd and fs/cifs. Move these to the common
code in fs/smbfs_common/smb2pdu.h
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull iomap fixlet from Andreas Gruenbacher:
"Fix buffered write page prefaulting.
I forgot to send it the previous merge window. I've only improved the
patch description since"
* tag 'write-page-prefaulting' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
fs/iomap: Fix buffered write page prefaulting
|
|
git://git.kernel.dk/linux-block
Pull bio allocation fix from Jens Axboe:
"We got some reports of users seeing:
Unexpected gfp: 0x2 (__GFP_HIGHMEM). Fixing up to gfp: 0x1192888
which is a regression caused by the bio allocation cleanups"
* tag 'for-5.18/alloc-cleanups-2022-03-25' of git://git.kernel.dk/linux-block:
fs: do not pass __GFP_HIGHMEM to bio_alloc in do_mpage_readpage
|
|
Pull NVMe write streams removal from Jens Axboe:
"This removes the write streams support in NVMe. No vendor ever really
shipped working support for this, and they are not interested in
supporting it.
With the NVMe support gone, we have nothing in the tree that supports
this. Remove passing around of the hints.
The only discussion point in this patchset imho is the fact that the
file specific write hint setting/getting fcntl helpers will now return
-1/EINVAL like they did before we supported write hints. No known
applications use these functions, I only know of one prototype that I
help do for RocksDB, and that's not used. That said, with a change
like this, it's always a bit controversial. Alternatively, we could
just make them return 0 and pretend it worked. It's placement based
hints after all"
* tag 'for-5.18/write-streams-2022-03-18' of git://git.kernel.dk/linux-block:
fs: remove fs.f_write_hint
fs: remove kiocb.ki_hint
block: remove the per-bio/request write hint
nvme: remove support or stream based temperature hint
|
|
If __nfs_pageio_add_request() fails to add the request, it will return
with either desc->pg_error < 0, or mirror->pg_recoalesce will be set, so
we are guaranteed either to exit the function altogether, or to loop.
However if there is nothing left in mirror->pg_list to coalesce, we must
exit, so make sure that we clear mirror->pg_recoalesce every time we
loop.
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Fixes: 70536bf4eb07 ("NFS: Clean up reset of the mirror accounting variables")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull reiserfs updates from Jan Kara:
"The biggest change in this pull is the addition of a deprecation
message about reiserfs with the outlook that we'd eventually be able
to remove it from the kernel. Because it is practically unmaintained
and untested and odd enough that people don't want to bother with it
anymore...
Otherwise there are small udf and ext2 fixes"
* tag 'fs_for_v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: remove redundant assignment of variable etype
reiserfs: Deprecate reiserfs
ext2: correct max file size computing
reiserfs: get rid of AOP_FLAG_CONT_EXPAND flag
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"A few fsnotify improvements and cleanups"
* tag 'fsnotify_for_v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: remove redundant parameter judgment
fsnotify: optimize FS_MODIFY events with no ignored masks
fsnotify: fix merge with parent's ignored mask
|
|
When there are no files for __io_sqe_files_scm() to process in the
range, it'll free everything and return. However, it forgets to put uid.
Fixes: 08a451739a9b5 ("io_uring: allow sparse fixed file sets")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/accee442376f33ce8aaebb099d04967533efde92.1648226048.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild update for C11 language base from Masahiro Yamada:
"Kbuild -std=gnu11 updates for v5.18
Linus pointed out the benefits of C99 some years ago, especially
variable declarations in loops [1]. At that time, we were not ready
for the migration due to old compilers.
Recently, Jakob Koschel reported a bug in list_for_each_entry(), which
leaks the invalid pointer out of the loop [2]. In the discussion, we
agreed that the time had come. Now that GCC 5.1 is the minimum
compiler version, there is nothing to prevent us from going to
-std=gnu99, or even straight to -std=gnu11.
Discussions for a better list iterator implementation are ongoing, but
this patch set must land first"
[1] https://lore.kernel.org/all/CAHk-=wgr12JkKmRd21qh-se-_Gs69kbPgR9x4C+Es-yJV2GLkA@mail.gmail.com/
[2] https://lore.kernel.org/lkml/86C4CE7D-6D93-456B-AA82-F8ADEACA40B7@gmail.com/
* tag 'kbuild-gnu11-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Kbuild: use -std=gnu11 for KBUILD_USERCFLAGS
Kbuild: move to -std=gnu11
Kbuild: use -Wdeclaration-after-statement
Kbuild: add -Wno-shift-negative-value where -Wextra is used
|
|
We have duplicated definitions for various SMB3 PDUs in
fs/ksmbd and fs/cifs. Some had already been moved to
fs/smbfs_common/smb2pdu.h
Move definitions for
- error response
- query info and various related protocol flags
- various lease handling flags and the create lease context
to smbfs_common/smb2pdu.h to reduce code duplication
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When part of the user buffer passed to generic_perform_write() or
iomap_file_buffered_write() cannot be faulted in for reading, the entire
write currently fails. The correct behavior would be to write all the
data that can be written, up to the point of failure.
Commit a6294593e8a1 ("iov_iter: Turn iov_iter_fault_in_readable into
fault_in_iov_iter_readable") gave us the information needed, so fix the
page prefaulting in generic_perform_write() and iomap_write_iter() to
only bail out when no pages could be faulted in.
We already factor in that pages that are faulted in may no longer be
resident by the time they are accessed. Paging out pages has the same
effect as not faulting in those pages in the first place, so the code
can already deal with that.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
io_put_kbuf_comp() should only be called while holding
->completion_lock, however there is no such assumption in io_clean_op()
and thus it can corrupt ->io_buffer_comp. Take the lock there, and
workaround the only user of io_clean_op() calling it with locks. Not
the prettiest solution, but it's easier to refactor it for-next.
Fixes: cc3cec8367cba ("io_uring: speedup provided buffer handling")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/743e2130b73ec6d48c4c5dd15db896c433431e6d.1648212967.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_req_complete_failed() doesn't require callers to hold ->uring_lock,
use IO_URING_F_UNLOCKED version of io_put_kbuf(). The only affected
place is the fail path of io_apoll_task_func(). Also add a lockdep
annotation to catch such bugs in the future.
Fixes: 3b2b78a8eb7cc ("io_uring: extend provided buf return to fails")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ccf602dbf8df3b6a8552a262d8ee0a13a086fbc7.1648212967.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move a misplaced comment about req->creds and add a line with
assumptions about req->link.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1e51d1e6b1f3708c2d4127b4e371f9daa4c5f859.1648209006.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When polling sockets for accept, use EPOLLEXCLUSIVE. This is helpful
when multiple accept SQEs are submitted.
For O_NONBLOCK sockets multiple queued SQEs would previously have all
completed at once, but most with -EAGAIN as the result. Now only one
wakes up and completes.
For sockets without O_NONBLOCK there is no user facing change, but
internally the extra requests would previously be queued onto a worker
thread as they would wake up with no connection waiting, and be
punted. Now they do not wake up unnecessarily.
Co-developed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220325093755.4123343-1-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull ceph updates from Ilya Dryomov:
"The highlights are:
- several changes to how snap context and snap realms are tracked
(Xiubo Li). In particular, this should resolve a long-standing
issue of high kworker CPU usage and various stalls caused by
needless iteration over all inodes in the snap realm.
- async create fixes to address hangs in some edge cases (Jeff
Layton)
- support for getvxattr MDS op for querying server-side xattrs, such
as file/directory layouts and ephemeral pins (Milind Changire)
- average latency is now maintained for all metrics (Venky Shankar)
- some tweaks around handling inline data to make it fit better with
netfs helper library (David Howells)
Also a couple of memory leaks got plugged along with a few assorted
fixups. Last but not least, Xiubo has stepped up to serve as a CephFS
co-maintainer"
* tag 'ceph-for-5.18-rc1' of https://github.com/ceph/ceph-client: (27 commits)
ceph: fix memory leak in ceph_readdir when note_last_dentry returns error
ceph: uninitialized variable in debug output
ceph: use tracked average r/w/m latencies to display metrics in debugfs
ceph: include average/stdev r/w/m latency in mds metrics
ceph: track average r/w/m latency
ceph: use ktime_to_timespec64() rather than jiffies_to_timespec64()
ceph: assign the ci only when the inode isn't NULL
ceph: fix inode reference leakage in ceph_get_snapdir()
ceph: misc fix for code style and logs
ceph: allocate capsnap memory outside of ceph_queue_cap_snap()
ceph: do not release the global snaprealm until unmounting
ceph: remove incorrect and unused CEPH_INO_DOTDOT macro
MAINTAINERS: add Xiubo Li as cephfs co-maintainer
ceph: eliminate the recursion when rebuilding the snap context
ceph: do not update snapshot context when there is no new snapshot
ceph: zero the dir_entries memory when allocating it
ceph: move to a dedicated slabcache for ceph_cap_snap
ceph: add getvxattr op
libceph: drop else branches in prepare_read_data{,_cont}
ceph: fix comments mentioning i_mutex
...
|
|
Pull xfs updates from Darrick Wong:
"The biggest change this cycle is bringing XFS' inode attribute setting
code back towards alignment with what the VFS does. IOWs, setgid bit
handling should be a closer match with ext4 and btrfs behavior.
The rest of the branch is bug fixes around the filesystem -- patching
gaps in quota enforcement, removing bogus selinux audit messages, and
fixing log corruption and problems with log recovery. There will be a
second pull request later on in the merge window with more bug fixes.
Dave Chinner will be taking over as XFS maintainer for one release
cycle, starting from the day 5.18-rc1 drops until 5.19-rc1 is tagged
so that I can focus on starting a massive design review for the
(feature complete after five years) online repair feature.
Summary:
- Fix some incorrect mapping state being passed to iomap during COW
- Don't create bogus selinux audit messages when deciding to degrade
gracefully due to lack of privilege
- Fix setattr implementation to use VFS helpers so that we drop
setgid consistently with the other filesystems
- Fix link/unlink/rename to check quota limits
- Constify xfs_name_dotdot to prevent abuse of in-kernel symbols
- Fix log livelock between the AIL and inodegc threads during
recovery
- Fix a log stall when the AIL races with pushers
- Fix stalls in CIL flushes due to pinned inode cluster buffers
during recovery
- Fix log corruption due to incorrect usage of xfs_is_shutdown vs
xlog_is_shutdown because during an induced fs shutdown, AIL
writeback must continue until the log is shut down, even if the
filesystem has already shut down"
* tag 'xfs-5.18-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: xfs_is_shutdown vs xlog_is_shutdown cage fight
xfs: AIL should be log centric
xfs: log items should have a xlog pointer, not a mount
xfs: async CIL flushes need pending pushes to be made stable
xfs: xfs_ail_push_all_sync() stalls when racing with updates
xfs: check buffer pin state after locking in delwri_submit
xfs: log worker needs to start before intent/unlink recovery
xfs: constify xfs_name_dotdot
xfs: constify the name argument to various directory functions
xfs: reserve quota for target dir expansion when renaming files
xfs: reserve quota for dir expansion when linking/unlinking files
xfs: refactor user/group quota chown in xfs_setattr_nonsize
xfs: use setattr_copy to set vfs inode attributes
xfs: don't generate selinux audit messages for capability testing
xfs: add missing cmap->br_state = XFS_EXT_NORM update
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull DAX updates from Dan Williams:
"Andrew has been shepherding major dax features that touch the core -mm
through his tree, but I still collect the dax updates that are core-mm
independent.
- Fix a crash due to a missing rcu_barrier() in dax_fs_exit()
- Fix two miscellaneous doc issues"
* tag 'dax-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Fix missing kdoc for dax_device
dax: make sure inodes are flushed before destroy cache
fsdax: fix function description
|
|
While profiling task_work intensive workloads, I noticed that most of
the time in tctx_task_work() is spending stalled on loading 'req'. This
is one of the unfortunate side effects of using linked lists,
particularly when they end up being passe around.
Prefetch the next request, if there is one. There's a sufficient amount
of work in between that this makes it available for the next loop.
While fiddling with the cache layout, move the link outside of the
hot completion cacheline. It's rarely used in hot workloads, so better
to bring in kbuf which is used for networked loads with provided buffers.
This reduces tctx_task_work() overhead from ~3% to 1-1.5% in my testing.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When direct writes fail with -ENOTBLK because we're writing into a
hole (gfs2_iomap_begin()) or because of a page invalidation failure
(iomap_dio_rw()), we're falling back to buffered writes. In that case,
when we lose the inode glock in gfs2_file_buffered_write(), we want to
re-acquire it instead of returning a short write.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Function iomap_dio_rw() only returns -ENOTBLK for write requests and
gfs2_file_direct_read() no longer returns -ENOTBLK since commit
1d45bb7f9d2a5 ("gfs2: Use iomap for stuffed direct I/O reads"), so there
is no need to check for -ENOTBLK in gfs2_file_read_iter() anymore.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Since commit 554c577cee95b, gfs2_file_buffered_write() can accidentally
return a truncated iov_iter, which might confuse callers. Fix that.
Fixes: 554c577cee95b ("gfs2: Prevent endless loops in gfs2_file_buffered_write")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Do not set REQ_F_NOWAIT if the socket is non blocking. When enabled this
causes the accept to immediately post a CQE with EAGAIN, which means you
cannot perform an accept SQE on a NONBLOCK socket asynchronously.
By removing the flag if there is no pending accept then poll is armed as
usual and when a connection comes in the CQE is posted.
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220324143435.2875844-1-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Merge more updates from Andrew Morton:
"Various misc subsystems, before getting into the post-linux-next
material.
41 patches.
Subsystems affected by this patch series: procfs, misc, core-kernel,
lib, checkpatch, init, pipe, minix, fat, cgroups, kexec, kdump,
taskstats, panic, kcov, resource, and ubsan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (41 commits)
Revert "ubsan, kcsan: Don't combine sanitizer with kcov on clang"
kernel/resource: fix kfree() of bootmem memory again
kcov: properly handle subsequent mmap calls
kcov: split ioctl handling into locked and unlocked parts
panic: move panic_print before kmsg dumpers
panic: add option to dump all CPUs backtraces in panic_print
docs: sysctl/kernel: add missing bit to panic_print
taskstats: remove unneeded dead assignment
kasan: no need to unset panic_on_warn in end_report()
ubsan: no need to unset panic_on_warn in ubsan_epilogue()
panic: unset panic_on_warn inside panic()
docs: kdump: add scp example to write out the dump file
docs: kdump: update description about sysfs file system support
arm64: mm: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef
x86/setup: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef
riscv: mm: init: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef
kexec: make crashk_res, crashk_low_res and crash_notes symbols always visible
cgroup: use irqsave in cgroup_rstat_flush_locked().
fat: use pointer to simple type in put_user()
minix: fix bug when opening a file with O_DIRECT
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull flexible-array transformations from Gustavo Silva:
"Treewide patch that replaces zero-length arrays with flexible-array
members.
This has been baking in linux-next for a whole development cycle"
* tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
treewide: Replace zero-length arrays with flexible-array members
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull mount attributes PREEMPT_RT update from Christian Brauner:
"This contains Sebastian's fix to make changing mount
attributes/getting write access compatible with CONFIG_PREEMPT_RT.
The change only applies when users explicitly opt-in to real-time via
CONFIG_PREEMPT_RT otherwise things are exactly as before. We've waited
quite a long time with this to make sure folks could take a good look"
* tag 'fs.rt.v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fs/namespace: Boost the mount_lock.lock owner instead of spinning on PREEMPT_RT.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull mount_setattr updates from Christian Brauner:
"This contains a few more patches to massage the mount_setattr()
codepaths and one minor fix to reuse a helper we added some time back.
The final two patches do similar cleanups in different ways. One patch
is mine and the other is Al's who was nice enough to give me a branch
for it.
Since his came in later and my branch had been sitting in -next for
quite some time we just put his on top instead of swap them"
* tag 'fs.v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
mount_setattr(): clean the control flow and calling conventions
fs: clean up mount_setattr control flow
fs: don't open-code mnt_hold_writers()
fs: simplify check in mount_setattr_commit()
fs: add mnt_allow_writers() and simplify mount_setattr_prepare()
|
|
A subvolume with an active swapfile must not be deleted otherwise it
would not be possible to deactivate it.
After the subvolume is deleted, we cannot swapoff the swapfile in this
deleted subvolume because the path is unreachable. The swapfile is
still active and holding references, the filesystem cannot be unmounted.
The test looks like this:
mkfs.btrfs -f $dev > /dev/null
mount $dev $mnt
btrfs sub create $mnt/subvol
touch $mnt/subvol/swapfile
chmod 600 $mnt/subvol/swapfile
chattr +C $mnt/subvol/swapfile
dd if=/dev/zero of=$mnt/subvol/swapfile bs=1K count=4096
mkswap $mnt/subvol/swapfile
swapon $mnt/subvol/swapfile
btrfs sub delete $mnt/subvol
swapoff $mnt/subvol/swapfile # failed: No such file or directory
swapoff --all
unmount $mnt # target is busy.
To prevent above issue, we simply check that whether the subvolume
contains any active swapfile, and stop the deleting process. This
behavior is like snapshot ioctl dealing with a swapfile.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Kaiwen Hu <kevinhu@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is a long time leftover from when I originally added the free space
inode, the point was to catch cases where we weren't honoring the NOCOW
flag. However there exists a race with relocation, if we allocate our
free space inode in a block group that is about to be relocated, we
could trigger the COW path before the relocation has the opportunity to
find the extents and delete the free space cache. In production where
we have auto-relocation enabled we're seeing this WARN_ON_ONCE() around
5k times in a 2 week period, so not super common but enough that it's at
the top of our metrics.
We're properly handling the error here, and with us phasing out v1 space
cache anyway just drop the WARN_ON_ONCE.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
