| Age | Commit message (Collapse) | Author |
|---|
|
The flexfiles layout driver depends on NFSv3 module as data servers
might be configure to provide nfsv3 only.
Disabling the nfsv3 protocol completely disables the flexfiles layout driver,
however, the data server still might support v4.1 protocol. Thus the strond
couling betwwen flexfiles and nfsv3 modules should be relaxed, as layout driver
will return UNSUPPORTED if not matching protocol is found.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
When the client is required to use TEST_STATEID to discover which
delegation(s) have been revoked, it may continually test delegations at the
head of the list if the server continues to be unsatisfied and send
SEQ4_STATUS_RECALLABLE_STATE_REVOKED. For a large number of delegations
this behavior is prone to live-lock because the client may never be able to
test and free revoked state at the end of the list since the
SEQ4_STATUS_RECALLABLE_STATE_REVOKED will cause us to flag delegations at
the head of the list to be tested. This problem is further exacerbated by
the state manager's willingness to be scheduled out on a busy system while
testing the list of delegations.
Keep a generation counter for each attempt to test all delegations, and
skip delegations that have already been tested in the current pass.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Tested-by: Torkil Svensgaard <torkil@drcmr.dk>
Tested-by: Ruben Vestergaard <rubenv@drcmr.dk>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Setting softlockup_panic from do_sysctl_args() causes it to take effect
later in boot. The lockup detector is enabled before SMP is brought
online, but do_sysctl_args runs afterwards. If a user wants to set
softlockup_panic on boot and have it trigger should a softlockup occur
during onlining of the non-boot processors, they could do this prior to
commit f117955a2255 ("kernel/watchdog.c: convert {soft/hard}lockup boot
parameters to sysctl aliases"). However, after this commit the value
of softlockup_panic is set too late to be of help for this type of
problem. Restore the prior behavior.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: stable@vger.kernel.org
Fixes: f117955a2255 ("kernel/watchdog.c: convert {soft/hard}lockup boot parameters to sysctl aliases")
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
The code that checks for unknown boot options is unaware of the sysctl
alias facility, which maps bootparams to sysctl values. If a user sets
an old value that has a valid alias, a message about an invalid
parameter will be printed during boot, and the parameter will get passed
to init. Fix by checking for the existence of aliased parameters in the
unknown boot parameter code. If an alias exists, don't return an error
or pass the value to init.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: stable@vger.kernel.org
Fixes: 0a477e1ae21b ("kernel/sysctl: support handling command line aliases")
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Gao Xiang has reported that on ext4 O_SYNC direct IO does not properly
sync file size update and thus if we crash at unfortunate moment, the
file can have smaller size although O_SYNC IO has reported successful
completion. The problem happens because update of on-disk inode size is
handled in ext4_dio_write_iter() *after* iomap_dio_rw() (and thus
dio_complete() in particular) has returned and generic_file_sync() gets
called by dio_complete(). Fix the problem by handling on-disk inode size
update directly in our ->end_io completion handler.
References: https://lore.kernel.org/all/02d18236-26ef-09b0-90ad-030c4fe3ee20@linux.alibaba.com
Reported-by: Gao Xiang <hsiangkao@linux.alibaba.com>
CC: stable@vger.kernel.org
Fixes: 378f32bab371 ("ext4: introduce direct I/O write using iomap infrastructure")
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20231013121350.26872-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
syzbot reports that the following warning from ext4_iomap_begin()
triggers as of the commit referenced below:
if (WARN_ON_ONCE(ext4_has_inline_data(inode)))
return -ERANGE;
This occurs during a dio write, which is never expected to encounter
an inode with inline data. To enforce this behavior,
ext4_dio_write_iter() checks the current inline state of the inode
and clears the MAY_INLINE_DATA state flag to either fall back to
buffered writes, or enforce that any other writers in progress on
the inode are not allowed to create inline data.
The problem is that the check for existing inline data and the state
flag can span a lock cycle. For example, if the ilock is originally
locked shared and subsequently upgraded to exclusive, another writer
may have reacquired the lock and created inline data before the dio
write task acquires the lock and proceeds.
The commit referenced below loosens the lock requirements to allow
some forms of unaligned dio writes to occur under shared lock, but
AFAICT the inline data check was technically already racy for any
dio write that would have involved a lock cycle. Regardless, lift
clearing of the state bit to the same lock critical section that
checks for preexisting inline data on the inode to close the race.
Cc: stable@kernel.org
Reported-by: syzbot+307da6ca5cb0d01d581a@syzkaller.appspotmail.com
Fixes: 310ee0902b8d ("ext4: allow concurrent unaligned dio overwrites")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20231002185020.531537-1-bfoster@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
We were passing 0 as the xid for the call to query
server interfaces. This is not great for debugging.
This change adds a real xid.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In the output of /proc/fs/cifs/DebugData, we do not
print the server->capabilities field today.
With this change, we will do that.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Simplify symlink_hash() by using crypto_shash_digest() instead of an
init+update+final sequence. This should also improve performance.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Skip SMB sessions that are being teared down
(e.g. @ses->ses_status == SES_EXITING) in cifs_debug_data_proc_show()
to avoid use-after-free in @ses.
This fixes the following GPF when reading from /proc/fs/cifs/DebugData
while mounting and umounting
[ 816.251274] general protection fault, probably for non-canonical
address 0x6b6b6b6b6b6b6d81: 0000 [#1] PREEMPT SMP NOPTI
...
[ 816.260138] Call Trace:
[ 816.260329] <TASK>
[ 816.260499] ? die_addr+0x36/0x90
[ 816.260762] ? exc_general_protection+0x1b3/0x410
[ 816.261126] ? asm_exc_general_protection+0x26/0x30
[ 816.261502] ? cifs_debug_tcon+0xbd/0x240 [cifs]
[ 816.261878] ? cifs_debug_tcon+0xab/0x240 [cifs]
[ 816.262249] cifs_debug_data_proc_show+0x516/0xdb0 [cifs]
[ 816.262689] ? seq_read_iter+0x379/0x470
[ 816.262995] seq_read_iter+0x118/0x470
[ 816.263291] proc_reg_read_iter+0x53/0x90
[ 816.263596] ? srso_alias_return_thunk+0x5/0x7f
[ 816.263945] vfs_read+0x201/0x350
[ 816.264211] ksys_read+0x75/0x100
[ 816.264472] do_syscall_64+0x3f/0x90
[ 816.264750] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 816.265135] RIP: 0033:0x7fd5e669d381
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
All release_mid() callers seem to hold a reference of @mid so there is
no need to call kref_put(&mid->refcount, __release_mid) under
@server->mid_lock spinlock. If they don't, then an use-after-free bug
would have occurred anyways.
By getting rid of such spinlock also fixes a potential deadlock as
shown below
CPU 0 CPU 1
------------------------------------------------------------------
cifs_demultiplex_thread() cifs_debug_data_proc_show()
release_mid()
spin_lock(&server->mid_lock);
spin_lock(&cifs_tcp_ses_lock)
spin_lock(&server->mid_lock)
__release_mid()
smb2_find_smb_tcon()
spin_lock(&cifs_tcp_ses_lock) *deadlock*
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fixes some xfstests including generic/564 and generic/157
The "sfu" mount option can be useful for creating special files (character
and block devices in particular) but could not create FIFOs. It did
recognize existing empty files with the "system" attribute flag as FIFOs
but this is too general, so to support creating FIFOs more safely use a new
tag (but the same length as those for char and block devices ie "IntxLNK"
and "IntxBLK") "LnxFIFO" to indicate that the file should be treated as a
FIFO (when mounted with the "sfu"). For some additional context note that
"sfu" followed the way that "Services for Unix" on Windows handled these
special files (at least for character and block devices and symlinks),
which is different than newer Windows which can handle special files
as reparse points (which isn't an option to many servers).
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
New helper for new rebalance code
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
data_progress_list is gone - it was redundant with moving_context_list
The upcoming rebalance rewrite is going to have it using two different
move_stats objects with the same moving_context, depending on whether
it's scanning or using the rebalance_work btree - this patch plumbs
stats around a bit differently so that will work.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
btree_trans and moving_context are used together, and having the
moving_context owns the transaction object reduces some plumbing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Prep work for the new rebalance code - we need a few helpers exported.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Since compression options now include compression level, proper
validation is a bit more involved.
This adds bch2_compression_opt_valid(), and plumbs it around
appropriately.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes an infinite loop when there's a set bit at position >= 32.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We don't yet repair (split) them, just check.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The write path may (rarely) see an encoded (checksummed) extent that
exceeds encoded_extent_max - this can happen when we're moving an
existing extent that was not checksummed, but was given a checksum by
bch2_write_rechecksum().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We're going to be using bch2_target_to_text() ->
bch2_disk_path_to_text() from bch2_bkey_ptrs_to_text() and
bch2_bkey_ptrs_invalid(), which can be called in any context.
This patch adds the actual label to bch_disk_group_cpu so that it can be
used by bch2_disk_path_to_text, and splits out bch2_disk_path_to_text()
into two variants - like the previous patch, one for when we have a
running filesystem and another for when we only have a superblock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previously we just had bch2_opt_target_to_text() which could be passed
either a filesystem object or just a superblock - depending on if we
have a running filesystem or not.
Split these into two functions for clarity.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Upcoming rebalance_work btree will require extent triggers to be
BTREE_TRIGGER_WANTS_OLD_AND_NEW - so to reduce potential confusion,
let's just make all triggers BTREE_TRIGGER_WANTS_OLD_AND_NEW.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The data move path now correctly picks IO options when inodes in
different snapshots have different options applied.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We can't mark device superblocks or allocate journal on a device that
isn't online.
That means we may need to do this on every mount, because we may have
formatted a new filesystem and then done the first mount
(bch2_fs_initialize()) in degraded mode.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This code duplicated initialization already done in
bch2_fs_btree_iter_init().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The ca->oldest_gen array needs to be the same size as the bucket_gens
array; ca->mi.nbuckets is updated with only state_lock held, not
gc_lock, so bch2_gc_gens() could race with device resize and allocate
too small of an oldest_gens array.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Shrinkers are now exported to debugfs, so the names can't have slashes
in them.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
More forwards compatibility fixups: having BKEY_TYPE_btree at the end of
the enum conflicts with unnkown btree IDs, this shifts BKEY_TYPE_btree
to slot 0 and fixes things up accordingly.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Since we can run with unknown btree IDs, we can't directly index btree
IDs into fixed size arrays.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Be a bit more careful about when bch2_delete_dead_snapshots needs to
run: it only needs to run synchronously if we're running fsck, and it
only needs to run at all if we have snapshot nodes to delete or if fsck
has noticed that it needs to run.
Also:
Rename BCH_FS_HAVE_DELETED_SNAPSHOTS -> BCH_FS_NEED_DELETE_DEAD_SNAPSHOTS
Kill bch2_delete_dead_snapshots_hook(), move functionality to
bch2_mark_snapshot()
Factor out bch2_check_snapshot_needs_deletion(), to explicitly check
if we need to be running snapshot deletion.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We must not hold btree locks while taking snapshot_create_lock - this
fixes a lockdep splat.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Commit 18b44bc5a672 ("ovl: Always reevaluate the file signature for
IMA") forced signature re-evaulation on every file access.
Instead of always re-evaluating the file's integrity, detect a change
to the backing file, by comparing the cached file metadata with the
backing file's metadata. Verifying just the i_version has not changed
is insufficient. In addition save and compare the i_ino and s_dev
as well.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: Eric Snowberg <eric.snowberg@oracle.com>
Tested-by: Raul E Rangel <rrangel@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
As Linus pointed out [1], lockref_put_return() is fundamentally
designed to be something that can fail. It behaves as a fastpath-only
thing, and the failure case needs to be handled anyway.
Actually, since the new pcluster was just allocated without being
populated, it won't be accessed by others until it is inserted into
XArray, so lockref helpers are actually unneeded here.
Let's just set the proper reference count on initializing.
[1] https://lore.kernel.org/r/CAHk-=whCga8BeQnJ3ZBh_Hfm9ctba_wpF444LpwRybVNMzO6Dw@mail.gmail.com
Fixes: 7674a42f35ea ("erofs: use struct lockref to replace handcrafted approach")
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20231031060524.1103921-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
- Support non-BSS ELF segments with zero filesz
Eric Biederman and I refactored ELF segment loading to handle the
case where a segment has a smaller filesz than memsz. Traditionally
linkers only did this for .bss and it was always the last segment. As
a result, the kernel only handled this case when it was the last
segment. We've had two recent cases where linkers were trying to use
these kinds of segments for other reasons, and the were in the middle
of the segment list. There was no good reason for the kernel not to
support this, and the refactor actually ends up making things more
readable too.
- Enable namespaced binfmt_misc
Christian Brauner has made it possible to use binfmt_misc with mount
namespaces. This means some traditionally root-only interfaces (for
adding/removing formats) are now more exposed (but believed to be
safe).
- Remove struct tag 'dynamic' from ELF UAPI
Alejandro Colomar noticed that the ELF UAPI has been polluting the
struct namespace with an unused and overly generic tag named
"dynamic" for no discernible reason for many many years. After
double-checking various distro source repositories, it has been
removed.
- Clean up binfmt_elf_fdpic debug output (Greg Ungerer)
* tag 'execve-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_misc: enable sandboxed mounts
binfmt_misc: cleanup on filesystem umount
binfmt_elf_fdpic: clean up debug warnings
mm: Remove unused vm_brk()
binfmt_elf: Only report padzero() errors when PROT_WRITE
binfmt_elf: Use elf_load() for library
binfmt_elf: Use elf_load() for interpreter
binfmt_elf: elf_bss no longer used by load_elf_binary()
binfmt_elf: Support segments with 0 filesz and misaligned starts
elf, uapi: Remove struct tag 'dynamic'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
- Check for out-of-memory condition during initialization (Jiasheng
Jiang)
- Fix documentation typos (Tudor Ambarus)
* tag 'pstore-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore/platform: Add check for kstrdup
docs: pstore-blk.rst: fix typo, s/console/ftrace
docs: pstore-blk.rst: use "about" as a preposition after "care"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"One of the more voluminous set of changes is for adding the new
__counted_by annotation[1] to gain run-time bounds checking of
dynamically sized arrays with UBSan.
- Add LKDTM test for stuck CPUs (Mark Rutland)
- Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)
- Refactor more 1-element arrays into flexible arrays (Gustavo A. R.
Silva)
- Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem
Shaikh)
- Convert group_info.usage to refcount_t (Elena Reshetova)
- Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)
- Add Kconfig fragment for basic hardening options (Kees Cook, Lukas
Bulwahn)
- Fix randstruct GCC plugin performance mode to stay in groups (Kees
Cook)
- Fix strtomem() compile-time check for small sources (Kees Cook)"
* tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits)
hwmon: (acpi_power_meter) replace open-coded kmemdup_nul
reset: Annotate struct reset_control_array with __counted_by
kexec: Annotate struct crash_mem with __counted_by
virtio_console: Annotate struct port_buffer with __counted_by
ima: Add __counted_by for struct modsig and use struct_size()
MAINTAINERS: Include stackleak paths in hardening entry
string: Adjust strtomem() logic to allow for smaller sources
hardening: x86: drop reference to removed config AMD_IOMMU_V2
randstruct: Fix gcc-plugin performance mode to stay in group
mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by
drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by
irqchip/imx-intmux: Annotate struct intmux_data with __counted_by
KVM: Annotate struct kvm_irq_routing_table with __counted_by
virt: acrn: Annotate struct vm_memory_region_batch with __counted_by
hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by
sparc: Annotate struct cpuinfo_tree with __counted_by
isdn: kcapi: replace deprecated strncpy with strscpy_pad
isdn: replace deprecated strncpy with strscpy
NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by
nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by
...
|
|
The connection could be binded to the existing session for Multichannel.
session will be destroyed when binded connections are released.
So no need to wait for that's connection at logoff.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
As pointed out by Linus, closure_sync() was racy; we could skip blocking
immediately after a get() and a put(), but then that would skip any
barrier corresponding to the other thread's put() barrier.
To fix this, always do the full __closure_sync() sequence whenever any
get() has happened and the closure might have been used by other
threads.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This commit adds mount option 'zero_size_dir'. If this option
enabled, don't allocate a cluster to directory when creating
it, and set the directory size to 0.
On Windows, a cluster is allocated for a directory when it is
created, so the mount option is disabled by default.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
After repairing a corrupted file system with exfatprogs' fsck.exfat,
zero-size directories may result. It is also possible to create
zero-size directories in other exFAT implementation, such as Paragon
ufsd dirver.
As described in the specification, the lower directory size limits
is 0 bytes.
Without this commit, sub-directories and files cannot be created
under a zero-size directory, and it cannot be removed.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Add GET and SET attributes ioctls to enable attribute modification.
We already do this in FAT and a few userspace utils made for it would
benefit from this also working on exFAT, namely fatattr.
Signed-off-by: Jan Cincera <hcincera@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
- Remove unused includes like <linux/parser.h> and <linux/prefetch.h>;
- Move common includes into "internal.h".
Signed-off-by: Ferry Meng <mengferry@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20231026021627.23284-2-mengferry@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Let's open code this helper for simplicity.
Signed-off-by: Ferry Meng <mengferry@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20231026021627.23284-1-mengferry@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Move erofs_load_compr_cfgs() into decompressor.c as well as introduce
a callback instead of a hard-coded switch for each algorithm for
simplicity.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231022130957.11398-1-xiang@kernel.org
|
