| Age | Commit message (Collapse) | Author |
|---|
|
Currently cgroup_writeback_by_id calls mem_cgroup_wb_stats() to get dirty
pages for a memcg. However mem_cgroup_wb_stats() does a lot more than
just get the number of dirty pages. Just directly get the number of dirty
pages instead of calling mem_cgroup_wb_stats(). Also
cgroup_writeback_by_id() is only called for best-effort dirty flushing, so
remove the unused 'nr' parameter and no need to explicitly flush memcg
stats.
Link: https://lkml.kernel.org/r/20210722182627.2267368-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
pginodesteal is supposed to capture the impact that inode reclaim has on
the page cache state. Currently, it doesn't consider shadow pages that
get dropped this way, even though this can have a significant impact on
paging behavior, memory pressure calculations etc.
To improve visibility into these effects, make sure shadow pages get
counted when they get dropped through inode reclaim.
This changes the return value semantics of invalidate_mapping_pages()
semantics slightly, but the only two users are the inode shrinker itsel
and a usb driver that logs it for debugging purposes.
Link: https://lkml.kernel.org/r/20210614211904.14420-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When drop_caches truncates the page cache in an inode it also includes any
shadow entries for evicted pages. However, there is a preliminary check
on whether the inode has pages: if it has *only* shadow entries, it will
skip running truncation on the inode and leave it behind.
Fix the check to mapping_empty(), such that it runs truncation on any
inode that has cache entries at all.
Link: https://lkml.kernel.org/r/20210614211904.14420-2-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Roman Gushchin <guro@fb.com>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently we trigger writeback bandwidth estimation from
balance_dirty_pages() and from wb_writeback(). However neither of these
need to trigger when the system is relatively idle and writeback is
triggered e.g. from fsync(2). Make sure writeback estimates happen
reliably by triggering them from do_writepages().
Link: https://lkml.kernel.org/r/20210713104716.22868-2-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Michael Stapelberg <stapelberg+linux@google.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "writeback: Fix bandwidth estimates", v4.
Fix estimate of writeback throughput when device is not fully busy doing
writeback. Michael Stapelberg has reported that such workload (e.g.
generated by linking) tends to push estimated throughput down to 0 and as
a result writeback on the device is practically stalled.
The first three patches fix the reported issue, the remaining two patches
are unrelated cleanups of problems I've noticed when reading the code.
This patch (of 4):
Track number of inodes under writeback for each bdi_writeback structure.
We will use this to decide whether wb does any IO and so we can estimate
its writeback throughput. In principle we could use number of pages under
writeback (WB_WRITEBACK counter) for this however normal percpu counter
reads are too inaccurate for our purposes and summing the counter is too
expensive.
Link: https://lkml.kernel.org/r/20210713104519.16394-1-jack@suse.cz
Link: https://lkml.kernel.org/r/20210713104716.22868-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Michael Stapelberg <stapelberg+linux@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Usually, ocfs2_downconvert_lock() function always downconverts dlm lock to
the expected level for satisfy dlm bast requests from the other nodes.
But there is a rare situation. When dlm lock conversion is being
canceled, ocfs2_downconvert_lock() function will return -EBUSY. You need
to be aware that ocfs2_cancel_convert() function is asynchronous in fsdlm
implementation.
If we does not requeue this lockres entry, ocfs2 downconvert thread no
longer handles this dlm lock bast request. Then, the other nodes will not
get the dlm lock again, the current node's process will be blocked when
acquire this dlm lock again.
Link: https://lkml.kernel.org/r/20210830044621.12544-1-ghe@suse.com
Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ocfs2_local_read_info()
A memory block is allocated through kmalloc(), and its return value is
assigned to the pointer oinfo. However, oinfo->dqi_gqinode is not
initialized but it is accessed in:
iput(oinfo->dqi_gqinode);
To fix this possible uninitialized-variable access, assign NULL to
oinfo->dqi_gqinode, and add ocfs2_qinfo_lock_res_init() behind the
assignment in ocfs2_local_read_info(). Remove ocfs2_qinfo_lock_res_init()
in ocfs2_global_read_info().
Link: https://lkml.kernel.org/r/20210804031832.57154-1-islituo@gmail.com
Signed-off-by: Tuo Li <islituo@gmail.com>
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The case where "tmp_oh" is NULL is handled at the start of the function.
At this point we know it's non-NULL so this will always return 1.
Link: https://lkml.kernel.org/r/YOcItgIXtisi3MaO@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Larry Chen <lchen@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
All in-tree users of MAP_DENYWRITE are gone. MAP_DENYWRITE cannot be
set from user space, so all users are gone; let's remove it.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
|
|
At exec time when we mmap the new executable via MAP_DENYWRITE we have it
opened via do_open_execat() and already deny_write_access()'ed the file
successfully. Once exec completes, we allow_write_acces(); however,
we set mm->exe_file in begin_new_exec() via set_mm_exe_file() and
also deny_write_access() as long as mm->exe_file remains set. We'll
effectively deny write access to our executable via mm->exe_file
until mm->exe_file is changed -- when the process is removed, on new
exec, or via sys_prctl(PR_SET_MM_MAP/EXE_FILE).
Let's remove all usage of MAP_DENYWRITE, it's no longer necessary for
mm->exe_file.
In case of an elf interpreter, we'll now only deny write access to the file
during exec. This is somewhat okay, because the interpreter behaves
(and sometime is) a shared library; all shared libraries, especially the
ones loaded directly in user space like via dlopen() won't ever be mapped
via MAP_DENYWRITE, because we ignore that from user space completely;
these shared libraries can always be modified while mapped and executed.
Let's only special-case the main executable, denying write access while
being executed by a process. This can be considered a minor user space
visible change.
While this is a cleanup, it also fixes part of a problem reported with
VM_DENYWRITE on overlayfs, as VM_DENYWRITE is effectively unused with
this patch and will be removed next:
"Overlayfs did not honor positive i_writecount on realfile for
VM_DENYWRITE mappings." [1]
[1] https://lore.kernel.org/r/YNHXzBgzRrZu1MrD@miu.piliscsaba.redhat.com/
Reported-by: Chengguang Xu <cgxu519@mykernel.net>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
|
|
We want to remove VM_DENYWRITE only currently only used when mapping the
executable during exec. During exec, we already deny_write_access() the
executable, however, after exec completes the VMAs mapped
with VM_DENYWRITE effectively keeps write access denied via
deny_write_access().
Let's deny write access when setting or replacing the MM exe_file. With
this change, we can remove VM_DENYWRITE for mapping executables.
Make set_mm_exe_file() return an error in case deny_write_access()
fails; note that this should never happen, because exec code does a
deny_write_access() early and keeps write access denied when calling
set_mm_exe_file. However, it makes the code easier to read and makes
set_mm_exe_file() and replace_mm_exe_file() look more similar.
This represents a minor user space visible change:
sys_prctl(PR_SET_MM_MAP/EXE_FILE) can now fail if the file is already
opened writable. Also, after sys_prctl(PR_SET_MM_MAP/EXE_FILE) the file
cannot be opened writable. Note that we can already fail with -EACCES if
the file doesn't have execute permissions.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
|
|
uselib() is the legacy systemcall for loading shared libraries.
Nowadays, applications use dlopen() to load shared libraries, completely
implemented in user space via mmap().
For example, glibc uses MAP_COPY to mmap shared libraries. While this
maps to MAP_PRIVATE | MAP_DENYWRITE on Linux, Linux ignores any
MAP_DENYWRITE specification from user space in mmap.
With this change, all remaining in-tree users of MAP_DENYWRITE use it
to map an executable. We will be able to open shared libraries loaded
via uselib() writable, just as we already can via dlopen() from user
space.
This is one step into the direction of removing MAP_DENYWRITE from the
kernel. This can be considered a minor user space visible change.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
|
|
IIUC, IORING_POLL_ADD_MULTI is similar to epoll's edge-triggered mode,
that means once one pure poll request returns one event(cqe), we'll
need to read or write continually until EAGAIN is returned, then I think
there is a possible poll event lost race in multi shot mode:
t1 poll request add | |
t2 | |
t3 event happens | |
t4 task work add | |
t5 | task work run |
t6 | commit one cqe |
t7 | | user app handles cqe
t8 | new event happen |
t9 | add back to waitqueue |
t10 |
After t6 but before t9, if new event happens, there'll be no wakeup
operation, and if user app has picked up this cqe in t7, read or write
until EAGAIN is returned. In t8, new event happens and will be lost,
though this race window maybe small.
To fix this possible race, add poll request back to waitqueue before
committing cqe.
Fixes: 88e41cf928a6 ("io_uring: add multishot mode for IORING_OP_POLL_ADD")
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210903142436.5767-1-xiaoguang.wang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_submit_flush_completions() may enqueue linked requests for task_work
execution, so don't leave tctx_task_work() right after the tw list is
exhausted, but try to flush and then retry.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0755d4c2c36301447c63bdd4146c10477cea4249.1630539342.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Not passing issue_flags from kiocb_done() into __io_complete_rw() means
that completion batching for this case is disabled, e.g. for most of
buffered reads.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b2689462835c3ee28a5999ef4f9a581e24be04a2.1630539342.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
SQPOLL has a different thread doing submissions, we need to check for
that and use the right task context when updating the worker values.
Just hold the sqd->lock across the operation, this ensures that the
thread cannot go away while we poke at ->io_uring.
Link: https://github.com/axboe/liburing/issues/420
Fixes: 2e480058ddc2 ("io-wq: provide a way to limit max number of workers")
Reported-by: Johannes Lundberg <johalun0@gmail.com>
Tested-by: Johannes Lundberg <johalun0@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently in the case where kmem_cache_alloc fails the null pointer
cf is dereferenced when assigning cf->is_capsnap = false. Fix this
by adding a null pointer check and return path.
Cc: stable@vger.kernel.org
Addresses-Coverity: ("Dereference null return")
Fixes: b2f9fa1f3bd8 ("ceph: correctly handle releasing an embedded cap flush")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, qla2xxx,
target, smartpqi, lpfc, mpt3sas).
The core change causing the most churn was replacing the command
request field request with a macro, allowing us to offset map to it
and remove the redundant field; the same was also done for the tag
field.
The most impactful change is the final removal of scsi_ioctl, which
has been deprecated for over a decade"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (293 commits)
scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1
scsi: ufs: ufs-exynos: Fix static checker warning
scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Copyright updates for 14.0.0.1 patches
scsi: lpfc: Update lpfc version to 14.0.0.1
scsi: lpfc: Add bsg support for retrieving adapter cmf data
scsi: lpfc: Add cmf_info sysfs entry
scsi: lpfc: Add debugfs support for cm framework buffers
scsi: lpfc: Add support for maintaining the cm statistics buffer
scsi: lpfc: Add rx monitoring statistics
scsi: lpfc: Add support for the CM framework
scsi: lpfc: Add cmfsync WQE support
scsi: lpfc: Add support for cm enablement buffer
scsi: lpfc: Add cm statistics buffer support
scsi: lpfc: Add EDC ELS support
scsi: lpfc: Expand FPIN and RDF receive logging
scsi: lpfc: Add MIB feature enablement support
scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware
scsi: fc: Add EDC ELS definition
...
|
|
These are very chatty, racy, and not terribly useful. Just remove them.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
For example in the case of a forced umount, we'll remove all the session
caps even if they are dirty. Move the warning to a wrapper function and
make most of the callers use it. Call the core function when removing
caps due to a forced umount.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Force umount will try to close the sessions by setting the session
state to _CLOSING. We don't want to WARN in this situation, since it's
expected.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
capsnaps will take inode references via ihold when queueing to flush.
When force unmounting, the client will just close the sessions and
may never get a flush reply, causing a leak and inode ref leak.
Fix this by removing the capsnaps for an inode when removing the caps.
URL: https://tracker.ceph.com/issues/52295
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
The current code will update the mtime and then try to get caps to
handle the write. If we end up having to request caps from the MDS, then
the mtime in the cap grant will clobber the updated mtime and it'll be
lost.
This is most noticable when two clients are alternately writing to the
same file. Fw caps are continually being granted and revoked, and the
mtime ends up stuck because the updated mtimes are always being
overwritten with the old one.
Fix this by changing the order of operations in ceph_write_iter to get
the caps before updating the times. Also, make sure we check the pool
full conditions before even getting any caps or uninlining.
URL: https://tracker.ceph.com/issues/46574
Reported-by: Jozef Kováč <kovac@firma.zoznam.sk>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
In the case where the export MDS has crashed just after the EImportStart
journal is flushed, a standby MDS takes over for it and when replaying
the EImportStart journal the MDS will wait the client to reconnect. That
may never happen because the client may not have registered or opened
the sessions yet.
When receiving a new map, ensure we reconnect to valid export targets as
well if their sessions don't exist yet.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Print a bit more information when we can't find the realm during
ceph_add_cap. Show both the inode number and the old realm inode
number.
Suggested-by: Sage Weil <sage@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Consolidate some fiddly code for changing an inode's snap_realm
into a new helper function, and change the callers to use it.
While we're in here, nothing uses the i_snap_realm_counter field, so
remove that from the inode.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
The ceph_mds_client and ceph_mds_session structures are kzalloc'ed so
there's no need to explicitly initialize either of their fields to 0.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
The first thing metric_delayed_work does is check mdsc->stopping,
and then return immediately if it's set. That's good since we would
have already torn down the metric structures at this point, otherwise,
but there is no locking around mdsc->stopping.
It's possible that the ceph_metric_destroy call could race with the
delayed_work, in which case we could end up with the delayed_work
accessing destroyed percpu variables.
At this point in the mdsc teardown, the "stopping" flag has already been
set, so there's no benefit to flushing the work. Move the work
cancellation in ceph_metric_destroy ahead of the percpu variable
destruction, and eliminate the flush_delayed_work call in
ceph_mdsc_destroy.
Fixes: 18f473b384a6 ("ceph: periodically send perf metrics to MDSes")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Add a new vxattr that shows what MDS is authoritative for an inode (if
we happen to have auth caps). If we don't have an auth cap for the inode
then just return -1.
URL: https://tracker.ceph.com/issues/1276
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
We missed these in the recent fscache rework.
Reported-by: Steve French <smfrench@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
For the client requests who will have unsafe and safe replies from
MDS daemons, in the MDS side the MDS daemons won't flush the mdlog
(journal log) immediatelly, because they think it's unnecessary.
That's true for most cases but not all, likes the fsync request.
The fsync will wait until all the unsafe replied requests to be
safely replied.
Normally if there have multiple threads or clients are running, the
whole mdlog in MDS daemons could be flushed in time if any request
will trigger the mdlog submit thread. So usually we won't experience
the normal operations will stuck for a long time. But in case there
has only one client with only thread is running, the stuck phenomenon
maybe obvious and the worst case it must wait at most 5 seconds to
wait the mdlog to be flushed by the MDS's tick thread periodically.
This patch will trigger to flush the mdlog in the relevant and auth
MDSes to which the in-flight requests are sent just before waiting
the unsafe requests to finish.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
If we hit a decoding error late in the frame, then we might exit the
function without putting the pool_ns string. Ensure that we always put
that reference on the way out of the function.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"This KUnit update for Linux 5.15-rc1 adds new features and tests:
Tool:
- support for '--kernel_args' to allow setting module params
- support for '--raw_output' option to show just the kunit output
during make
Tests:
- new KUnit tests for checksums and timestamps
- Print test statistics on failure
- Integrates UBSAN into the KUnit testing framework. It fails KUnit
tests whenever it reports undefined behavior"
* tag 'linux-kselftest-kunit-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Print test statistics on failure
kunit: tool: make --raw_output support only showing kunit output
kunit: tool: add --kernel_args to allow setting module params
kunit: ubsan integration
fat: Add KUnit tests for checksums and timestamps
|
|
Pull configfs updates from Christoph Hellwig:
- fix a race in configfs_lookup (Sishuai Gong)
- minor cleanups (me)
* tag 'configfs-5.15' of git://git.infradead.org/users/hch/configfs:
configfs: fix a race in configfs_lookup()
configfs: fold configfs_attach_attr into configfs_lookup
configfs: simplify the configfs_dirent_is_ready
configfs: return -ENAMETOOLONG earlier in configfs_lookup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This set includes a number of minor fixes and cleanups related to the
networking changes in the last release.
A patch to delay ack messages reduces network traffic significantly"
* tag 'dlm-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
fs: dlm: avoid comms shutdown delay in release_lockspace
fs: dlm: fix return -EINTR on recovery stopped
fs: dlm: implement delayed ack handling
fs: dlm: move receive loop into receive handler
fs: dlm: fix multiple empty writequeue alloc
fs: dlm: generic connect func
fs: dlm: auto load sctp module
fs: dlm: introduce generic listen
fs: dlm: move to static proto ops
fs: dlm: introduce con_next_wq helper
fs: dlm: cleanup and remove _send_rcom
fs: dlm: clear CF_APP_LIMITED on close
fs: dlm: fix typo in tlv prefix
fs: dlm: use READ_ONCE for config var
fs: dlm: use sk->sk_socket instead of con->sock
|
|
If a task is queueing async work and also handling signals, then we can
run into the case where create_io_thread() is interrupted and returns
failure because of that. If this happens for creating the first worker
in a group, then that worker will never get created and we can hang the
ring.
If we do get a fork failure, retry from task_work. With signals we have
to be a bit careful as we cannot simply queue as task_work, as we'll
still have signals pending at that point. Punt over a normal workqueue
first and then create from task_work after that.
Lastly, ensure that we handle fatal worker creations. Worker creation
failures are normally not fatal, only if we fail to create one in an empty
worker group can we not make progress. Right now that is ignored, ensure
that we handle that and run cancel on the work item.
There are two paths that create new workers - one is the "existing worker
going to sleep", and the other is "no workers found for this work, create
one". The former is never fatal, as workers do exist in the group. Only
the latter needs to be carefully handled.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It makes the logic easier to follow if we just get rid of the fixed worker
flag, and simply ensure that we never exit the last worker in the group.
This also means that no particular worker is special.
Just track the last timeout state, and if we have hit it and no work
is pending, check if there are other workers. If yes, then we can exit
this one safely.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead of just marking the buffer as having overflowed, fill it up as
much as we can. That will allow the overflow case to then return
whatever truncated result if it wants to.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"In addition to some ext4 bug fixes and cleanups, this cycle we add the
orphan_file feature, which eliminates bottlenecks when doing a large
number of parallel truncates and file deletions, and move the discard
operation out of the jbd2 commit thread when using the discard mount
option, to better support devices with slow discard operations"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
ext4: make the updating inode data procedure atomic
ext4: remove an unnecessary if statement in __ext4_get_inode_loc()
ext4: move inode eio simulation behind io completeion
ext4: Improve scalability of ext4 orphan file handling
ext4: Orphan file documentation
ext4: Speedup ext4 orphan inode handling
ext4: Move orphan inode handling into a separate file
ext4: Support for checksumming from journal triggers
ext4: fix race writing to an inline_data file while its xattrs are changing
jbd2: add sparse annotations for add_transaction_credits()
ext4: fix sparse warnings
ext4: Make sure quota files are not grabbed accidentally
ext4: fix e2fsprogs checksum failure for mounted filesystem
ext4: if zeroout fails fall back to splitting the extent node
ext4: reduce arguments of ext4_fc_add_dentry_tlv
ext4: flush background discard kwork when retry allocation
ext4: get discard out of jbd2 commit kthread contex
ext4: remove the repeated comment of ext4_trim_all_free
ext4: add new helper interface ext4_try_to_trim_range()
ext4: remove the 'group' parameter of ext4_trim_extent
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs update from Miklos Szeredi:
- Copy up immutable/append/sync/noatime attributes (Amir Goldstein)
- Improve performance by enabling RCU lookup.
- Misc fixes and improvements
The reason this touches so many files is that the ->get_acl() method now
gets a "bool rcu" argument. The ->get_acl() API was updated based on
comments from Al and Linus:
Link: https://lore.kernel.org/linux-fsdevel/CAJfpeguQxpd6Wgc0Jd3ks77zcsAv_bn0q17L3VNnnmPKu11t8A@mail.gmail.com/
* tag 'ovl-update-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: enable RCU'd ->get_acl()
vfs: add rcu argument to ->get_acl() callback
ovl: fix BUG_ON() in may_delete() when called from ovl_cleanup()
ovl: use kvalloc in xattr copy-up
ovl: update ctime when changing fileattr
ovl: skip checking lower file's i_writecount on truncate
ovl: relax lookup error on mismatch origin ftype
ovl: do not set overlay.opaque for new directories
ovl: add ovl_allow_offline_changes() helper
ovl: disable decoding null uuid with redirect_dir
ovl: consistent behavior for immutable/append-only inodes
ovl: copy up sync/noatime fileattr flags
ovl: pass ovl_fs to ovl_check_setxattr()
fs: add generic helper for filling statx attribute flags
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"In this cycle, direct I/O and fsdax support for uncompressed files are
now added in order to avoid double-caching for loop device and VM
container use cases. All uncompressed cases are now turned into iomap
infrastructure, which looks much simpler and cleaner.
In addition, fiemap support is added for both (un)compressed files by
using iomap infrastructure as well so end users can easily get file
distribution. We've also added chunk-based uncompressed files support
for data deduplication as the next step of VM container use cases.
Summary:
- support direct I/O for all uncompressed files
- support fsdax for non-tailpacking regular files
- use iomap infrastructure for all uncompressed cases
- support fiemap for both (un)compressed files
- introduce chunk-based files for chunk deduplication
- some cleanups"
* tag 'erofs-for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix double free of 'copied'
erofs: support reading chunk-based uncompressed files
erofs: introduce chunk-based file on-disk format
erofs: add fiemap support with iomap
erofs: add support for the full decompressed length
erofs: remove the mapping parameter from erofs_try_to_free_cached_page()
erofs: directly use wrapper erofs_page_is_managed() when shrinking
erofs: convert all uncompressed cases to iomap
erofs: dax support for non-tailpacking regular file
erofs: iomap support for non-tailpacking DIO
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull fscache updates from David Howells:
"Preparatory work for the fscache rewrite that's being worked on and
fix some bugs. These include:
- Always select netfs stats when enabling fscache stats since they're
displayed through the same procfile.
- Add a cookie debug ID that can be used in tracepoints instead of a
pointer and cache it in the netfs_cache_resources struct rather
than in the netfs_read_request struct to make it more available.
- Use file_inode() in cachefiles rather than dereferencing
file->f_inode directly.
- Provide a procfile to display fscache cookies.
- Remove the fscache and cachefiles histogram procfiles.
- Remove the fscache object list procfile.
- Avoid using %p in fscache and cachefiles as the value is hashed and
not comparable to the register dump in an oops trace.
- Fix the cookie hash function to actually achieve useful dispersion.
- Fix fscache_cookie_put() so that it doesn't dereference the cookie
pointer in the tracepoint after the refcount has been decremented
(we're only allowed to do that if we decremented it to zero).
- Use refcount_t rather than atomic_t for the fscache_cookie
refcount"
* tag 'fscache-next-20210829' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
fscache: Use refcount_t for the cookie refcount instead of atomic_t
fscache: Fix fscache_cookie_put() to not deref after dec
fscache: Fix cookie key hashing
cachefiles: Change %p in format strings to something else
fscache: Change %p in format strings to something else
fscache: Remove the object list procfile
fscache, cachefiles: Remove the histogram stuff
fscache: Procfile to display cookies
fscache: Add a cookie debug ID and use that in traces
cachefiles: Use file_inode() rather than accessing ->f_inode
netfs: Move cookie debug ID to struct netfs_cache_resources
fscache: Select netfs stats if fscache stats are enabled
|
|
Usually in file system init() messages are only displayed in info level.
Change level from notice to info, but keep CONFIG_NTFS3_64BIT_CLUSTER in
notice level. Also this need even more attention so let's put big
warning here so that nobody will not try accidentally use it.
There is also no good reason to display internal stuff like binary tree
search. This is always on option which can only disabled for debugging
purposes by developer. Also this message does not even check if
developer has disabled it or not so it is useless info.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Files already have SDPX identifier so no reason to keep boilerplates in
these files anymore.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Acked-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
This check will be also performed in generic_file_read_iter() so we do
not want to check this two times in a row.
This was founded with Smatch
fs/ntfs3/file.c:803 ntfs_file_read_iter()
warn: unused return: count = iov_iter_count()
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
