| Age | Commit message (Collapse) | Author |
|---|
|
commit a8948b5450e7c65a3a34ebf4ccfcebc19335d4fb upstream.
Removes the output of this purely informational message from the
kernel buffer:
"ntfs3: Max link count 4000"
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eb85dace897c5986bc2f36b3c783c6abb8a4292e upstream.
Syzbot has reported a potential hang in nilfs_detach_log_writer() called
during nilfs2 unmount.
Analysis revealed that this is because nilfs_segctor_sync(), which
synchronizes with the log writer thread, can be called after
nilfs_segctor_destroy() terminates that thread, as shown in the call trace
below:
nilfs_detach_log_writer
nilfs_segctor_destroy
nilfs_segctor_kill_thread --> Shut down log writer thread
flush_work
nilfs_iput_work_func
nilfs_dispose_list
iput
nilfs_evict_inode
nilfs_transaction_commit
nilfs_construct_segment (if inode needs sync)
nilfs_segctor_sync --> Attempt to synchronize with
log writer thread
*** DEADLOCK ***
Fix this issue by changing nilfs_segctor_sync() so that the log writer
thread returns normally without synchronizing after it terminates, and by
forcing tasks that are already waiting to complete once after the thread
terminates.
The skipped inode metadata flushout will then be processed together in the
subsequent cleanup work in nilfs_segctor_destroy().
Link: https://lkml.kernel.org/r/20240520132621.4054-4-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+e3973c409251e136fdd0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e3973c409251e136fdd0
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: "Bai, Shuangpeng" <sjb7183@psu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 936184eadd82906992ff1f5ab3aada70cce44cee upstream.
A potential and reproducible race issue has been identified where
nilfs_segctor_sync() would block even after the log writer thread writes a
checkpoint, unless there is an interrupt or other trigger to resume log
writing.
This turned out to be because, depending on the execution timing of the
log writer thread running in parallel, the log writer thread may skip
responding to nilfs_segctor_sync(), which causes a call to schedule()
waiting for completion within nilfs_segctor_sync() to lose the opportunity
to wake up.
The reason why waking up the task waiting in nilfs_segctor_sync() may be
skipped is that updating the request generation issued using a shared
sequence counter and adding an wait queue entry to the request wait queue
to the log writer, are not done atomically. There is a possibility that
log writing and request completion notification by nilfs_segctor_wakeup()
may occur between the two operations, and in that case, the wait queue
entry is not yet visible to nilfs_segctor_wakeup() and the wake-up of
nilfs_segctor_sync() will be carried over until the next request occurs.
Fix this issue by performing these two operations simultaneously within
the lock section of sc_state_lock. Also, following the memory barrier
guidelines for event waiting loops, move the call to set_current_state()
in the same location into the event waiting loop to ensure that a memory
barrier is inserted just before the event condition determination.
Link: https://lkml.kernel.org/r/20240520132621.4054-3-konishi.ryusuke@gmail.com
Fixes: 9ff05123e3bf ("nilfs2: segment constructor")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: "Bai, Shuangpeng" <sjb7183@psu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f5d4e04634c9cf68bdf23de08ada0bb92e8befe7 upstream.
Patch series "nilfs2: fix log writer related issues".
This bug fix series covers three nilfs2 log writer-related issues,
including a timer use-after-free issue and potential deadlock issue on
unmount, and a potential freeze issue in event synchronization found
during their analysis. Details are described in each commit log.
This patch (of 3):
A use-after-free issue has been reported regarding the timer sc_timer on
the nilfs_sc_info structure.
The problem is that even though it is used to wake up a sleeping log
writer thread, sc_timer is not shut down until the nilfs_sc_info structure
is about to be freed, and is used regardless of the thread's lifetime.
Fix this issue by limiting the use of sc_timer only while the log writer
thread is alive.
Link: https://lkml.kernel.org/r/20240520132621.4054-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20240520132621.4054-2-konishi.ryusuke@gmail.com
Fixes: fdce895ea5dd ("nilfs2: change sc_timer from a pointer to an embedded one in struct nilfs_sc_info")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: "Bai, Shuangpeng" <sjb7183@psu.edu>
Closes: https://groups.google.com/g/syzkaller/c/MK_LYqtt8ko/m/8rgdWeseAwAJ
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7af2ae1b1531feab5d38ec9c8f472dc6cceb4606 upstream.
When erofs_kill_sb() is called in block dev based mode, s_bdev may not
have been initialised yet, and if CONFIG_EROFS_FS_ONDEMAND is enabled,
it will be mistaken for fscache mode, and then attempt to free an anon_dev
that has never been allocated, triggering the following warning:
============================================
ida_free called for id=0 which is not allocated.
WARNING: CPU: 14 PID: 926 at lib/idr.c:525 ida_free+0x134/0x140
Modules linked in:
CPU: 14 PID: 926 Comm: mount Not tainted 6.9.0-rc3-dirty #630
RIP: 0010:ida_free+0x134/0x140
Call Trace:
<TASK>
erofs_kill_sb+0x81/0x90
deactivate_locked_super+0x35/0x80
get_tree_bdev+0x136/0x1e0
vfs_get_tree+0x2c/0xf0
do_new_mount+0x190/0x2f0
[...]
============================================
Now when erofs_kill_sb() is called, erofs_sb_info must have been
initialised, so use sbi->fsid to distinguish between the two modes.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20240419123611.947084-3-libaokun1@huawei.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 07abe43a28b2c660f726d66f5470f7f114f9643a upstream.
Instead of allocating the erofs_sb_info in fill_super() allocate it during
erofs_init_fs_context() and ensure that erofs can always have the info
available during erofs_kill_sb(). After this erofs_fs_context is no longer
needed, replace ctx with sbi, no functional changes.
Suggested-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20240419123611.947084-2-libaokun1@huawei.com
[ Gao Xiang: trivial conflict due to a warning message. ]
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.
So, in order to avoid ending up with a flexible-array member in the
middle of multiple other structs, we use the `__struct_group()` helper
to separate the flexible array from the rest of the members in the
flexible structure, and use the tagged `struct create_context_hdr`
instead of `struct create_context`.
So, with these changes, fix 51 of the following warnings[1]:
fs/smb/client/../common/smb2pdu.h:1225:31: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Link: https://gist.github.com/GustavoARSilva/772526a39be3dd4db39e71497f0a9893 [1]
Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
[ Upstream commit e9d8c2f95ab8acaf3f4d4a53682a4afa3c263692 ]
If capabilities of the share is not SMB2_SHARE_CAP_CONTINUOUS_AVAILABILITY,
ksmbd should not grant a persistent handle to the client.
This patch add continuous availability share parameter to control it.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit afc23febd51c7e24361e3a9c09f3e892eb0a41ea ]
Add tracing for the refcounting/lifecycle of the cifs_tcon struct, marking
different events with different labels and giving each tcon its own debug
ID so that the tracelines corresponding to individual tcons can be
distinguished. This can be enabled with:
echo 1 >/sys/kernel/debug/tracing/events/cifs/smb3_tcon_ref/enable
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c6ff459037b2e35450af2351037eac4c8aca1d6b ]
In cifs_sfu_make_node(), on success, instantiate rather than leave it
with dentry unhashed negative to support callers that expect mknod(2)
to always instantiate.
This fixes the following test case:
mount.cifs //srv/share /mnt -o ...,sfu
mkfifo /mnt/fifo
./xfstests/ltp/growfiles -b -W test -e 1 -u -i 0 -L 30 /mnt/fifo
...
BUG: unable to handle page fault for address: 000000034cec4e58
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 1 PREEMPT SMP PTI
CPU: 0 PID: 138098 Comm: growfiles Kdump: loaded Not tainted
5.14.0-436.3987_1240945149.el9.x86_64 #1
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:_raw_callee_save__kvm_vcpu_is_preempted+0x0/0x20
Code: e8 15 d9 61 00 e9 63 ff ff ff 41 bd ea ff ff ff e9 58 ff ff ff e8
d0 71 c0 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 <48> 8b 04
fd 60 2b c1 99 80 b8 90 50 03 00 00 0f 95 c0 c3 cc cc cc
RSP: 0018:ffffb6a143cf7cf8 EFLAGS: 00010206
RAX: ffff8a9bc30fb038 RBX: ffff8a9bc666a200 RCX: ffff8a9cc0260000
RDX: 00000000736f622e RSI: ffff8a9bc30fb038 RDI: 000000007665645f
RBP: ffffb6a143cf7d70 R08: 0000000000001000 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000000 R12: ffff8a9bc666a200
R13: 0000559a302a12b0 R14: 0000000000001000 R15: 0000000000000000
FS: 00007fbed1dbb740(0000) GS:ffff8a9cf0000000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000034cec4e58 CR3: 0000000128ec6006 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? show_trace_log_lvl+0x1c4/0x2df
? show_trace_log_lvl+0x1c4/0x2df
? __mutex_lock.constprop.0+0x5f7/0x6a0
? __die_body.cold+0x8/0xd
? page_fault_oops+0x134/0x170
? exc_page_fault+0x62/0x150
? asm_exc_page_fault+0x22/0x30
? _pfx_raw_callee_save__kvm_vcpu_is_preempted+0x10/0x10
__mutex_lock.constprop.0+0x5f7/0x6a0
? __mod_memcg_lruvec_state+0x84/0xd0
pipe_write+0x47/0x650
? do_anonymous_page+0x258/0x410
? inode_security+0x22/0x60
? selinux_file_permission+0x108/0x150
vfs_write+0x2cb/0x410
ksys_write+0x5f/0xe0
do_syscall_64+0x5c/0xf0
? syscall_exit_to_user_mode+0x22/0x40
? do_syscall_64+0x6b/0xf0
? sched_clock_cpu+0x9/0xc0
? exc_page_fault+0x62/0x150
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Cc: stable@vger.kernel.org
Fixes: 72bc63f5e23a ("smb3: fix creating FIFOs when mounting with "sfu" mount option")
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ec4535b2a1d709d3a1fbec26739c672f13c98a7b ]
cifs_get_fattr() may be called with a NULL inode, so check for a
non-NULL inode before calling
cifs_mark_open_handles_for_deleted_file().
This fixes the following oops:
mount.cifs //srv/share /mnt -o ...,vers=3.1.1
cd /mnt
touch foo; tail -f foo &
rm foo
cat foo
BUG: kernel NULL pointer dereference, address: 00000000000005c0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 2 PID: 696 Comm: cat Not tainted 6.9.0-rc2 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.3-1.fc39 04/01/2014
RIP: 0010:__lock_acquire+0x5d/0x1c70
Code: 00 00 44 8b a4 24 a0 00 00 00 45 85 f6 0f 84 bb 06 00 00 8b 2d
48 e2 95 01 45 89 c3 41 89 d2 45 89 c8 85 ed 0 0 <48> 81 3f 40 7a 76
83 44 0f 44 d8 83 fe 01 0f 86 1b 03 00 00 31 d2
RSP: 0018:ffffc90000b37490 EFLAGS: 00010002
RAX: 0000000000000000 RBX: ffff888110021ec0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000000005c0
RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000200
FS: 00007f2a1fa08740(0000) GS:ffff888157a00000(0000)
knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2: 00000000000005c0 CR3: 000000011ac7c000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x180/0x490
? srso_alias_return_thunk+0x5/0xfbef5
? exc_page_fault+0x70/0x230
? asm_exc_page_fault+0x26/0x30
? __lock_acquire+0x5d/0x1c70
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
lock_acquire+0xc0/0x2d0
? cifs_mark_open_handles_for_deleted_file+0x3a/0x100 [cifs]
? srso_alias_return_thunk+0x5/0xfbef5
? kmem_cache_alloc+0x2d9/0x370
_raw_spin_lock+0x34/0x80
? cifs_mark_open_handles_for_deleted_file+0x3a/0x100 [cifs]
cifs_mark_open_handles_for_deleted_file+0x3a/0x100 [cifs]
cifs_get_fattr+0x24c/0x940 [cifs]
? srso_alias_return_thunk+0x5/0xfbef5
cifs_get_inode_info+0x96/0x120 [cifs]
cifs_lookup+0x16e/0x800 [cifs]
cifs_atomic_open+0xc7/0x5d0 [cifs]
? lookup_open.isra.0+0x3ce/0x5f0
? __pfx_cifs_atomic_open+0x10/0x10 [cifs]
lookup_open.isra.0+0x3ce/0x5f0
path_openat+0x42b/0xc30
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
do_filp_open+0xc4/0x170
do_sys_openat2+0xab/0xe0
__x64_sys_openat+0x57/0xa0
do_syscall_64+0xc1/0x1e0
entry_SYSCALL_64_after_hwframe+0x72/0x7a
Fixes: ffceb7640cbf ("smb: client: do not defer close open handles to deleted files")
Reviewed-by: Meetakshi Setiya <msetiya@microsoft.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e9e9fbeb83f65d3d487e0a0838c0867292c99fb2 ]
Add trace points to help debug mknod and mkfifo:
smb3_mknod_done
smb3_mknod_enter
smb3_mknod_err
Example output:
TASK-PID CPU# ||||| TIMESTAMP FUNCTION
| | | ||||| | |
mkfifo-6163 [003] ..... 960.425558: smb3_mknod_enter: xid=12 sid=0xb55130f6 tid=0x46e6241c path=\fifo1
mkfifo-6163 [003] ..... 960.432719: smb3_mknod_done: xid=12 sid=0xb55130f6 tid=0x46e6241c
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e56bc745fa1de77abc2ad8debc4b1b83e0426c49 ]
Added new compression flag that was recently documented, in
addition fix some typos and clarify the sid_attr_data struct
definition.
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 68c5818a27afcb5cdddab041b82e9d47c996cb6a ]
The offset field in the compression header is 32 bits not 16.
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reported-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5b142b37c70b1fa6936fa2d0babb0b8c16767d3a ]
Move the following:
extern mempool_t *cifs_sm_req_poolp;
extern mempool_t *cifs_req_poolp;
extern mempool_t *cifs_mid_poolp;
extern bool disable_legacy_dialects;
from various .c files to cifsglob.h.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c6cd2e8d2d9aa7ee35b1fa6a668e32a22a9753da ]
I found potencial out-of-bounds when buffer offset fields of a few requests
is invalid. This patch set the minimum value of buffer offset field to
->Buffer offset to validate buffer length.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d10c77873ba1e9e6b91905018e29e196fd5f863d ]
If ->NameOffset/Length is bigger than ->CreateContextsOffset/Length,
ksmbd_check_message doesn't validate request buffer it correctly.
So slab-out-of-bounds warning from calling smb_strndup_from_utf16()
in smb2_open() could happen. If ->NameLength is non-zero, Set the larger
of the two sums (Name and CreateContext size) as the offset and length of
the data area.
Reported-by: Yang Chaoming <lometsj@live.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e758fa6956cbc873e4819ec3dd97cfd05a4c147e ]
There is a spelling mistake in a ksmbd_debug debug message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5fb282ba4fef8985a5acf2b32681f2ec07732561 ]
rcu_dereference can return NULL, so make sure we check against that.
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2760161d149f8d60c3f767fc62a823a1ead9d367 ]
This removes an unnecessary variable assignment. The assigned
value will be overwritten by cifs_fattr_to_inode before it
is accessed, making the line redundant.
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fc20c523211a38b87fc850a959cb2149e4fd64b0 ]
Fix potential memory leaks, add error checking, remove unnecessary
initialisation of status_file_deleted and do not use cifs_iget() to get
inode in reparse_info_to_fattr since fattrs may not be fully set.
Fixes: ffceb7640cbf ("smb: client: do not defer close open handles to deleted files")
Reported-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dc528770edb138e26a533f8a77de5c4db18ea7f3 ]
Previously we only deferred closing file handles with RHW
lease. To enhance performance benefits from deferred closes,
we now include handles with RH leases as well.
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c8efcc786146a951091588e5fa7e3c754850cb3c ]
Durable file handles allow reopening a file preserved on a short
network outage and transparent client reconnection within a timeout.
i.e. Durable handles aren't necessarily cleaned up when the opening
process terminates.
This patch add support for durable handle version 1 and 2.
To prove durable handles work on ksmbd, I have tested this patch with
the following smbtorture tests:
smb2.durable-open.open-oplock
smb2.durable-open.open-lease
smb2.durable-open.reopen1
smb2.durable-open.reopen1a
smb2.durable-open.reopen1a-lease
smb2.durable-open.reopen2
smb2.durable-open.reopen2a
smb2.durable-open.reopen2-lease
smb2.durable-open.reopen2-lease-v2
smb2.durable-open.reopen3
smb2.durable-open.reopen4
smb2.durable-open.delete_on_close2
smb2.durable-open.file-position
smb2.durable-open.lease
smb2.durable-open.alloc-size
smb2.durable-open.read-only
smb2.durable-v2-open.create-blob
smb2.durable-v2-open.open-oplock
smb2.durable-v2-open.open-lease
smb2.durable-v2-open.reopen1
smb2.durable-v2-open.reopen1a
smb2.durable-v2-open.reopen1a-lease
smb2.durable-v2-open.reopen2
smb2.durable-v2-open.reopen2b
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fa9415d4024fd0c58d24a4ad4f1826fb8bfcc4aa ]
Currently ksmbd exit connection as well destroying previous session.
When testing durable handle feaure, I found that
destroy_previous_session() should destroy only session, i.e. the
connection should be still alive. This patch mark SMB2_SESSION_EXPIRED
on the previous session to be destroyed later and not used anymore.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 24337b60e88219816f84d633369299660e8e8cce ]
Unify compression headers (chained and unchained) into a single struct
so we can use it for the initial compression transform header
interchangeably.
Also make the OriginalPayloadSize field to be always visible in the
compression payload header, and have callers subtract its size when not
needed.
Rename the related structs to match the naming convetion used in the
other SMB2 structs.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f49af462875a0922167cf301cf126cd04009070e ]
See protocol documentation in MS-SMB2 section 2.2.42.2.2
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8fe7062b7d11fcd21c4dcb5f530eaa1a099b24e7 ]
Change "compress=" mount option to a boolean flag, that, if set,
will enable negotiating compression algorithms with the server.
Do not de/compress anything for now.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 073dd87c8e1ee55ca163956f0c71249dc28aac51 ]
It can be helpful in debugging to know which ioctls are called to better
correlate them with smb3 fsctls (and opens). Add a dynamic trace point
to trace ioctls into cifs.ko
Here is sample output:
TASK-PID CPU# ||||| TIMESTAMP FUNCTION
| | | ||||| | |
new-inotify-ioc-90418 [001] ..... 142157.397024: smb3_ioctl: xid=18 fid=0x0 ioctl cmd=0xc009cf0b
new-inotify-ioc-90457 [007] ..... 142217.943569: smb3_ioctl: xid=22 fid=0x389bf5b6 ioctl cmd=0xc009cf0b
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1e5f4240714bb238d2d17c7e14e5fb45c9140665 ]
Add support for returning reparse mount option in /proc/mounts.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402262152.YZOwDlCM-lkp@intel.com/
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8bd25b61c5a55bc769c6608e9ce95860759acdcb ]
Set correct dirent->d_type for IO_REPARSE_TAG_DFS{,R} and
IO_REPARSE_TAG_MOUNT_POINT reparse points.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 78e26bec4d6d3aef04276e28bed48a45fd00e116 ]
Parse the extended attributes from WSL reparse points to correctly
report uid, gid mode and dev from ther instantiated inodes.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ea41367b2a602f602ea6594fc4a310520dcc64f4 ]
Add a new command to smb2_compound_op() for querying WSL extended
attributes from reparse points.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e0e1e09b2c41d383a2483f2ee5227b724860ced1 ]
This was intended to be an IS_ERR() check. The ea_create_context()
function doesn't return NULL.
Fixes: 1eab17fe485c ("smb: client: add support for WSL reparse points")
Reviewed-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5a4b09ecf8e8ad26ea03a37e52e310fe13f15b49 ]
Add support for creating special files via WSL reparse points when
using 'reparse=wsl' mount option. They're faster than NFS reparse
points because they don't require extra roundtrips to figure out what
->d_type a specific dirent is as such information is already stored in
query dir responses and then making getdents() calls faster.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fa792d8d235c20df5f422e4bd172db1efde55ab9 ]
Replace @desired_access, @create_disposition, @create_options and
@mode parameters with a single @oparms.
No functional changes.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6914d288c63682e20e0f6e1e0b8e8f5847012d67 ]
Now that smb2_compound_op() can accept up to 5 commands in a single
compound request, set the appropriate NextCommand and related flags to
all subsequent commands as well as handling the case where a valid
@cfile is passed and therefore skipping create and close requests in
the compound chain.
This fix a potential broken compound request that could be sent from
smb2_get_reparse_inode() if the client found a valid open
file (@cfile) prior to calling smb2_compound_op().
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c520ba7573a84bd37f8803a3beeb8f6f995bf9e1 ]
In preparation to add support for creating special files also via WSL
reparse points in next commits.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eb90e8ecb2b54ac1af51e28596e0ef7ba351476d ]
Allow the user to create special files and symlinks by choosing
between WSL and NFS reparse points via 'reparse={nfs,wsl}' mount
options. If unset or 'reparse=default', the client will default to
creating them via NFS reparse points.
Creating WSL reparse points isn't supported yet, so simply return
error when attempting to mount with 'reparse=wsl' for now.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 71f15c90e785d1de4bcd65a279e7256684c25c0d ]
There is a shortcoming in the current implementation of the file
lease mechanism exposed when the lease keys were attempted to be
reused for unlink, rename and set_path_size operations for a client. As
per MS-SMB2, lease keys are associated with the file name. Linux smb
client maintains lease keys with the inode. If the file has any hardlinks,
it is possible that the lease for a file be wrongly reused for an
operation on the hardlink or vice versa. In these cases, the mentioned
compound operations fail with STATUS_INVALID_PARAMETER.
This patch adds a fallback to the old mechanism of not sending any
lease with these compound operations if the request with lease key fails
with STATUS_INVALID_PARAMETER.
Resending the same request without lease key should not hurt any
functionality, but might impact performance especially in cases where
the error is not because of the usage of wrong lease key and we might
end up doing an extra roundtrip.
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ffceb7640cbfe6ea60e7769e107451d63a2fe3d3 ]
When a file/dentry has been deleted before closing all its open
handles, currently, closing them can add them to the deferred
close list. This can lead to problems in creating file with the
same name when the file is re-created before the deferred close
completes. This issue was seen while reusing a client's already
existing lease on a file for compound operations and xfstest 591
failed because of the deferred close handle that remained valid
even after the file was deleted and was being reused to create a
file with the same name. The server in this case returns an error
on open with STATUS_DELETE_PENDING. Recreating the file would
fail till the deferred handles are closed (duration specified in
closetimeo).
This patch fixes the issue by flagging all open handles for the
deleted file (file path to be precise) by setting
status_file_deleted to true in the cifsFileInfo structure. As per
the information classes specified in MS-FSCC, SMB2 query info
response from the server has a DeletePending field, set to true
to indicate that deletion has been requested on that file. If
this is the case, flag the open handles for this file too.
When doing close in cifs_close for each of these handles, check the
value of this boolean field and do not defer close these handles
if the corresponding filepath has been deleted.
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2c7d399e551ccfd87bcae4ef5573097f3313d779 ]
Currently, when a rename, unlink or set path size compound operation
is requested on a file that has a lot of dirty pages to be written
to the server, we do not send the lease key for these requests. As a
result, the server can assume that this request is from a new client, and
send a lease break notification to the same client, on the same
connection. As a response to the lease break, the client can consume
several credits to write the dirty pages to the server. Depending on the
server's credit grant implementation, the server can stop granting more
credits to this connection, and this can cause a deadlock (which can only
be resolved when the lease timer on the server expires).
One of the problems here is that the client is sending no lease key,
even if it has a lease for the file. This patch fixes the problem by
reusing the existing lease key on the file for rename, unlink and set path
size compound operations so that the client does not break its own lease.
A very trivial example could be a set of commands by a client that
maintains open handle (for write) to a file and then tries to copy the
contents of that file to another one, eg.,
tail -f /dev/null > myfile &
mv myfile myfile2
Presently, the network capture on the client shows that the move (or
rename) would trigger a lease break on the same client, for the same file.
With the lease key reused, the lease break request-response overhead is
eliminated, thereby reducing the roundtrips performed for this set of
operations.
The patch fixes the bug described above and also provides perf benefit.
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f83709b9e0eb7048d74ba4515f268c6eacbce9c9 ]
Merge smb311_posix_query_path_info into ->query_path_info() to get rid
of duplicate code.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 858e74876c5cbff1dfd5bace99e32fbce2abd4b5 ]
Parse owner/group when creating special files and symlinks under
SMB3.1.1 POSIX mounts.
Move the parsing of owner/group to smb2_compound_op() so we don't have
to duplicate it in both smb2_get_reparse_inode() and
smb311_posix_query_path_info().
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dbfdff402d89854126658376cbcb08363194d3cd ]
Changes to allocation size are approximated for extending writes of cached
files until the server returns the actual value (on SMB3 close or query info
for example), but it was setting the estimated value for number of blocks
to larger than the file size even if the file is likely sparse which
breaks various xfstests (e.g. generic/129, 130, 221, 228).
When i_size and i_blocks are updated in write completion do not increase
allocation size more than what was written (rounded up to 512 bytes).
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8bde59b20de06339d598e8b05e5195f7c631c38b ]
Convert path separator to CIFS_DIR_SEP(cifs_sb) from symlink target
before sending it over the wire otherwise the created SMB symlink may
become innaccesible from server side.
Fixes: 514d793e27a3 ("smb: client: allow creating symlinks via reparse points")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 79520587fe42cd4988aff8695d60621e689109cb ]
File open requests made to the server contain a
CreateGuid, which is used by the server to identify
the open request. If the same request needs to be
replayed, it needs to be sent with the same CreateGuid
in the durable handle v2 context.
Without doing so, we could end up leaking handles on
the server when:
1. multichannel is used AND
2. connection goes down, but not for all channels
This is because the replayed open request would have a
new CreateGuid and the server will treat this as a new
request and open a new handle.
This change fixes this by reusing the existing create_guid
stored in the cached fid struct.
REF: MS-SMB2 4.9 Replay Create Request on an Alternate Channel
Fixes: 4f1fffa23769 ("cifs: commands that are retried should have replay flag set")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a12bc36032a2f7917068f9ce9eb26d869e54b31a ]
The ksmbd_extract_sharename() function lacked a complete kernel-doc
comment. This patch adds parameter descriptions and detailed function
behavior to improve code readability and maintainability.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4cdad80261862c8cdcbb5fd232aa713d0bdefe24 ]
Similar to the rest of the commands, this is a change
to add replay flags on retry. This one does not add a
back-off, considering that we may want to flush a write
ASAP to the server. Considering that this will be a
flush of cached pages, the retrans value is also not
honoured.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4f1fffa2376922f3d1d506e49c0fd445b023a28e ]
MS-SMB2 states that the header flag SMB2_FLAGS_REPLAY_OPERATION
needs to be set when a command needs to be retried, so that
the server is aware that this is a replay for an operation that
appeared before.
This can be very important, for example, for state changing
operations and opens which get retried following a reconnect;
since the client maybe unaware of the status of the previous
open.
This is particularly important for multichannel scenario, since
disconnection of one connection does not mean that the session
is lost. The requests can be replayed on another channel.
This change also makes use of exponential back-off before replays
and also limits the number of retries to "retrans" mount option
value.
Also, this change does not modify the read/write codepath.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5d390df3bdd13d178eb2e02e60e9a480f7103f7b ]
Kernel has its own official true/false definitions.
The defines aren't even used in this file.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
