| Age | Commit message (Collapse) | Author |
|---|
|
commit ce56d21355cd6f6937aca32f1f44ca749d1e4808 upstream.
syzbot reports that the following warning from ext4_iomap_begin()
triggers as of the commit referenced below:
if (WARN_ON_ONCE(ext4_has_inline_data(inode)))
return -ERANGE;
This occurs during a dio write, which is never expected to encounter
an inode with inline data. To enforce this behavior,
ext4_dio_write_iter() checks the current inline state of the inode
and clears the MAY_INLINE_DATA state flag to either fall back to
buffered writes, or enforce that any other writers in progress on
the inode are not allowed to create inline data.
The problem is that the check for existing inline data and the state
flag can span a lock cycle. For example, if the ilock is originally
locked shared and subsequently upgraded to exclusive, another writer
may have reacquired the lock and created inline data before the dio
write task acquires the lock and proceeds.
The commit referenced below loosens the lock requirements to allow
some forms of unaligned dio writes to occur under shared lock, but
AFAICT the inline data check was technically already racy for any
dio write that would have involved a lock cycle. Regardless, lift
clearing of the state bit to the same lock critical section that
checks for preexisting inline data on the inode to close the race.
Cc: stable@kernel.org
Reported-by: syzbot+307da6ca5cb0d01d581a@syzkaller.appspotmail.com
Fixes: 310ee0902b8d ("ext4: allow concurrent unaligned dio overwrites")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20231002185020.531537-1-bfoster@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 91562895f8030cb9a0470b1db49de79346a69f91 upstream.
Gao Xiang has reported that on ext4 O_SYNC direct IO does not properly
sync file size update and thus if we crash at unfortunate moment, the
file can have smaller size although O_SYNC IO has reported successful
completion. The problem happens because update of on-disk inode size is
handled in ext4_dio_write_iter() *after* iomap_dio_rw() (and thus
dio_complete() in particular) has returned and generic_file_sync() gets
called by dio_complete(). Fix the problem by handling on-disk inode size
update directly in our ->end_io completion handler.
References: https://lore.kernel.org/all/02d18236-26ef-09b0-90ad-030c4fe3ee20@linux.alibaba.com
Reported-by: Gao Xiang <hsiangkao@linux.alibaba.com>
CC: stable@vger.kernel.org
Fixes: 378f32bab371 ("ext4: introduce direct I/O write using iomap infrastructure")
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20231013121350.26872-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9adac8b01f4be28acd5838aade42b8daa4f0b642 upstream.
add missed brelse in update_backups
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230826174712.4059355-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 40dd7953f4d606c280074f10d23046b6812708ce upstream.
Wrong check of gdb backup in meta bg as following:
first_group is the first group of meta_bg which contains target group, so
target group is always >= first_group. We check if target group has gdb
backup by comparing first_group with [group + 1] and [group +
EXT4_DESC_PER_BLOCK(sb) - 1]. As group >= first_group, then [group + N] is
> first_group. So no copy of gdb backup in meta bg is done in
setup_new_flex_group_blocks.
No need to do gdb backup copy in meta bg from setup_new_flex_group_blocks
as we always copy updated gdb block to backups at end of
ext4_flex_group_add as following:
ext4_flex_group_add
/* no gdb backup copy for meta bg any more */
setup_new_flex_group_blocks
/* update current group number */
ext4_update_super
sbi->s_groups_count += flex_gd->count;
/*
* if group in meta bg contains backup is added, the primary gdb block
* of the meta bg will be copy to backup in new added group here.
*/
for (; gdb_num <= gdb_num_end; gdb_num++)
update_backups(...)
In summary, we can remove wrong gdb backup copy code in
setup_new_flex_group_blocks.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230826174712.4059355-5-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 40ea98396a3659062267d1fe5f99af4f7e4f05e3 upstream.
When big allocate feature is enabled, we need to count and update
reserved clusters before removing a delayed only extent_status entry.
{init|count|get}_rsvd() have already done this, but the start block
number of this counting isn't correct in the following case.
lblk end
| |
v v
-------------------------
| | orig_es
-------------------------
^ ^
len1 is 0 | len2 |
If the start block of the orig_es entry founded is bigger than lblk, we
passed lblk as start block to count_rsvd(), but the length is correct,
finally, the range to be counted is offset. This patch fix this by
passing the start blocks to 'orig_es->lblk + len1'.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230824092619.1327976-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 48f1551592c54f7d8e2befc72a99ff4e47f7dca0 upstream.
Avoid to ignore error in "err".
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230826174712.4059355-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2cd8bdb5efc1e0d5b11a4b7ba6b922fd2736a87f upstream.
** Short Version **
In ext4 with dioread_nolock, we could have a scenario where the bh returned by
get_blocks (ext4_get_block_unwritten()) in __block_write_begin_int() has
UNWRITTEN and MAPPED flag set. Since such a bh does not have NEW flag set we
never zero out the range of bh that is not under write, causing whatever stale
data is present in the folio at that time to be written out to disk. To fix this
mark the buffer as new, in case it is unwritten, in ext4_get_block_unwritten().
** Long Version **
The issue mentioned above was resulting in two different bugs:
1. On block size < page size case in ext4, generic/269 was reliably
failing with dioread_nolock. The state of the write was as follows:
* The write was extending i_size.
* The last block of the file was fallocated and had an unwritten extent
* We were near ENOSPC and hence we were switching to non-delayed alloc
allocation.
In this case, the back trace that triggers the bug is as follows:
ext4_da_write_begin()
/* switch to nodelalloc due to low space */
ext4_write_begin()
ext4_should_dioread_nolock() // true since mount flags still have delalloc
__block_write_begin(..., ext4_get_block_unwritten)
__block_write_begin_int()
for(each buffer head in page) {
/* first iteration, this is bh1 which contains i_size */
if (!buffer_mapped)
get_block() /* returns bh with only UNWRITTEN and MAPPED */
/* second iteration, bh2 */
if (!buffer_mapped)
get_block() /* we fail here, could be ENOSPC */
}
if (err)
/*
* this would zero out all new buffers and mark them uptodate.
* Since bh1 was never marked new, we skip it here which causes
* the bug later.
*/
folio_zero_new_buffers();
/* ext4_wrte_begin() error handling */
ext4_truncate_failed_write()
ext4_truncate()
ext4_block_truncate_page()
__ext4_block_zero_page_range()
if(!buffer_uptodate())
ext4_read_bh_lock()
ext4_read_bh() -> ... ext4_submit_bh_wbc()
BUG_ON(buffer_unwritten(bh)); /* !!! */
2. The second issue is stale data exposure with page size >= blocksize
with dioread_nolock. The conditions needed for it to happen are same as
the previous issue ie dioread_nolock around ENOSPC condition. The issue
is also similar where in __block_write_begin_int() when we call
ext4_get_block_unwritten() on the buffer_head and the underlying extent
is unwritten, we get an unwritten and mapped buffer head. Since it is
not new, we never zero out the partial range which is not under write,
thus writing stale data to disk. This can be easily observed with the
following reproducer:
fallocate -l 4k testfile
xfs_io -c "pwrite 2k 2k" testfile
# hexdump output will have stale data in from byte 0 to 2k in testfile
hexdump -C testfile
NOTE: To trigger this, we need dioread_nolock enabled and write happening via
ext4_write_begin(), which is usually used when we have -o nodealloc. Since
dioread_nolock is disabled with nodelalloc, the only alternate way to call
ext4_write_begin() is to ensure that delayed alloc switches to nodelalloc ie
ext4_da_write_begin() calls ext4_write_begin(). This will usually happen when
ext4 is almost full like the way generic/269 was triggering it in Issue 1 above.
This might make the issue harder to hit. Hence, for reliable replication, I used
the below patch to temporarily allow dioread_nolock with nodelalloc and then
mount the disk with -o nodealloc,dioread_nolock. With this you can hit the stale
data issue 100% of times:
@@ -508,8 +508,8 @@ static inline int ext4_should_dioread_nolock(struct inode *inode)
if (ext4_should_journal_data(inode))
return 0;
/* temporary fix to prevent generic/422 test failures */
- if (!test_opt(inode->i_sb, DELALLOC))
- return 0;
+ // if (!test_opt(inode->i_sb, DELALLOC))
+ // return 0;
return 1;
}
After applying this patch to mark buffer as NEW, both the above issues are
fixed.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/d0ed09d70a9733fbb5349c5c7b125caac186ecdf.1695033645.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 31f13421c004a420c0e9d288859c9ea9259ea0cc upstream.
Commit 0aeaa2559d6d5 ("ext4: fix corruption when online resizing a 1K
bigalloc fs") found that primary superblock's offset in its group is
not equal to offset of backup superblock in its group when block size
is 1K and bigalloc is enabled. As group descriptor blocks are right
after superblock, we can't pass block number of gdb to update_backups
for the same reason.
The root casue of the issue above is that leading 1K padding block is
count as data block offset for primary block while backup block has no
padding block offset in its group.
Remove padding data block count to fix the issue for gdb backups.
For meta_bg case, update_backups treat blk_off as block number, do no
conversion in this case.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230826174712.4059355-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 484fd6c1de13b336806a967908a927cc0356e312 upstream.
The function ext4_init_acl() calls posix_acl_create() which is
responsible for applying the umask. But without
CONFIG_EXT4_FS_POSIX_ACL, ext4_init_acl() is an empty inline function,
and nobody applies the umask.
This fixes a bug which causes the umask to be ignored with O_TMPFILE
on ext4:
https://github.com/MusicPlayerDaemon/MPD/issues/558
https://bugs.gentoo.org/show_bug.cgi?id=686142#c3
https://bugzilla.kernel.org/show_bug.cgi?id=203625
Reviewed-by: "J. Bruce Fields" <bfields@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/r/20230919081824.1096619-1-max.kellermann@ionos.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8e387c89e96b9543a339f84043cf9df15fed2632 upstream.
__insert_pending() allocate memory in atomic context, so the allocation
could fail, but we are not handling that failure now. It could lead
ext4_es_remove_extent() to get wrong reserved clusters, and the global
data blocks reservation count will be incorrect. The same to
extents_status entry preallocation, preallocate pending entry out of the
i_es_lock with __GFP_NOFAIL, make sure __insert_pending() and
__revise_pending() always succeeds.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230824092619.1327976-3-yi.zhang@huaweicloud.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 745f17a4166e79315e4b7f33ce89d03e75a76983 upstream.
We got a WARNING in ext4_add_complete_io:
==================================================================
WARNING: at fs/ext4/page-io.c:231 ext4_put_io_end_defer+0x182/0x250
CPU: 10 PID: 77 Comm: ksoftirqd/10 Tainted: 6.3.0-rc2 #85
RIP: 0010:ext4_put_io_end_defer+0x182/0x250 [ext4]
[...]
Call Trace:
<TASK>
ext4_end_bio+0xa8/0x240 [ext4]
bio_endio+0x195/0x310
blk_update_request+0x184/0x770
scsi_end_request+0x2f/0x240
scsi_io_completion+0x75/0x450
scsi_finish_command+0xef/0x160
scsi_complete+0xa3/0x180
blk_complete_reqs+0x60/0x80
blk_done_softirq+0x25/0x40
__do_softirq+0x119/0x4c8
run_ksoftirqd+0x42/0x70
smpboot_thread_fn+0x136/0x3c0
kthread+0x140/0x1a0
ret_from_fork+0x2c/0x50
==================================================================
Above issue may happen as follows:
cpu1 cpu2
----------------------------|----------------------------
mount -o dioread_lock
ext4_writepages
ext4_do_writepages
*if (ext4_should_dioread_nolock(inode))*
// rsv_blocks is not assigned here
mount -o remount,dioread_nolock
ext4_journal_start_with_reserve
__ext4_journal_start
__ext4_journal_start_sb
jbd2__journal_start
*if (rsv_blocks)*
// h_rsv_handle is not initialized here
mpage_map_and_submit_extent
mpage_map_one_extent
dioread_nolock = ext4_should_dioread_nolock(inode)
if (dioread_nolock && (map->m_flags & EXT4_MAP_UNWRITTEN))
mpd->io_submit.io_end->handle = handle->h_rsv_handle
ext4_set_io_unwritten_flag
io_end->flag |= EXT4_IO_END_UNWRITTEN
// now io_end->handle is NULL but has EXT4_IO_END_UNWRITTEN flag
scsi_finish_command
scsi_io_completion
scsi_io_completion_action
scsi_end_request
blk_update_request
req_bio_endio
bio_endio
bio->bi_end_io > ext4_end_bio
ext4_put_io_end_defer
ext4_add_complete_io
// trigger WARN_ON(!io_end->handle && sbi->s_journal);
The immediate cause of this problem is that ext4_should_dioread_nolock()
function returns inconsistent values in the ext4_do_writepages() and
mpage_map_one_extent(). There are four conditions in this function that
can be changed at mount time to cause this problem. These four conditions
can be divided into two categories:
(1) journal_data and EXT4_EXTENTS_FL, which can be changed by ioctl
(2) DELALLOC and DIOREAD_NOLOCK, which can be changed by remount
The two in the first category have been fixed by commit c8585c6fcaf2
("ext4: fix races between changing inode journal mode and ext4_writepages")
and commit cb85f4d23f79 ("ext4: fix race between writepages and enabling
EXT4_EXTENTS_FL") respectively.
Two cases in the other category have not yet been fixed, and the above
issue is caused by this situation. We refer to the fix for the first
category, when applying options during remount, we grab s_writepages_rwsem
to avoid racing with writepages ops to trigger this problem.
Fixes: 6b523df4fb5a ("ext4: use transaction reservation for extent conversion in ext4_end_io")
Cc: stable@vger.kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230524072538.2883391-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 49cecd8628a9855cd993792a0377559ea32d5e7c upstream.
When inserting a DRC-cached response into the reply buffer, ensure
that the reply buffer's xdr_stream is updated properly. Otherwise
the server will send a garbage response.
Cc: stable@vger.kernel.org # v6.3+
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bc1b5acb40201a0746d68a7d7cfc141899937f4f upstream.
seq_release should be called to free the allocated seq_file
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Mahmoud Adam <mngyadam@amazon.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Fixes: 78599c42ae3c ("nfsd4: add file to display list of client's opens")
Reviewed-by: NeilBrown <neilb@suse.de>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f803982190f0265fd36cf84670aa6daefc2b0768 upstream.
Let's allocate the extent_cache tree without dynamic conditions to avoid a
missing condition causing a panic as below.
# create a file w/ a compressed flag
# disable the compression
# panic while updating extent_cache
F2FS-fs (dm-64): Swapfile: last extent is not aligned to section
F2FS-fs (dm-64): Swapfile (3) is not align to section: 1) creat(), 2) ioctl(F2FS_IOC_SET_PIN_FILE), 3) fallocate(2097152 * N)
Adding 124996k swap on ./swap-file. Priority:0 extents:2 across:17179494468k
==================================================================
BUG: KASAN: null-ptr-deref in instrument_atomic_read_write out/common/include/linux/instrumented.h:101 [inline]
BUG: KASAN: null-ptr-deref in atomic_try_cmpxchg_acquire out/common/include/asm-generic/atomic-instrumented.h:705 [inline]
BUG: KASAN: null-ptr-deref in queued_write_lock out/common/include/asm-generic/qrwlock.h:92 [inline]
BUG: KASAN: null-ptr-deref in __raw_write_lock out/common/include/linux/rwlock_api_smp.h:211 [inline]
BUG: KASAN: null-ptr-deref in _raw_write_lock+0x5a/0x110 out/common/kernel/locking/spinlock.c:295
Write of size 4 at addr 0000000000000030 by task syz-executor154/3327
CPU: 0 PID: 3327 Comm: syz-executor154 Tainted: G O 5.10.185 #1
Hardware name: emulation qemu-x86/qemu-x86, BIOS 2023.01-21885-gb3cc1cd24d 01/01/2023
Call Trace:
__dump_stack out/common/lib/dump_stack.c:77 [inline]
dump_stack_lvl+0x17e/0x1c4 out/common/lib/dump_stack.c:118
__kasan_report+0x16c/0x260 out/common/mm/kasan/report.c:415
kasan_report+0x51/0x70 out/common/mm/kasan/report.c:428
kasan_check_range+0x2f3/0x340 out/common/mm/kasan/generic.c:186
__kasan_check_write+0x14/0x20 out/common/mm/kasan/shadow.c:37
instrument_atomic_read_write out/common/include/linux/instrumented.h:101 [inline]
atomic_try_cmpxchg_acquire out/common/include/asm-generic/atomic-instrumented.h:705 [inline]
queued_write_lock out/common/include/asm-generic/qrwlock.h:92 [inline]
__raw_write_lock out/common/include/linux/rwlock_api_smp.h:211 [inline]
_raw_write_lock+0x5a/0x110 out/common/kernel/locking/spinlock.c:295
__drop_extent_tree+0xdf/0x2f0 out/common/fs/f2fs/extent_cache.c:1155
f2fs_drop_extent_tree+0x17/0x30 out/common/fs/f2fs/extent_cache.c:1172
f2fs_insert_range out/common/fs/f2fs/file.c:1600 [inline]
f2fs_fallocate+0x19fd/0x1f40 out/common/fs/f2fs/file.c:1764
vfs_fallocate+0x514/0x9b0 out/common/fs/open.c:310
ksys_fallocate out/common/fs/open.c:333 [inline]
__do_sys_fallocate out/common/fs/open.c:341 [inline]
__se_sys_fallocate out/common/fs/open.c:339 [inline]
__x64_sys_fallocate+0xb8/0x100 out/common/fs/open.c:339
do_syscall_64+0x35/0x50 out/common/arch/x86/entry/common.c:46
Cc: stable@vger.kernel.org
Fixes: 72840cccc0a1 ("f2fs: allocate the extent_cache by default")
Reported-and-tested-by: syzbot+d342e330a37b48c094b7@syzkaller.appspotmail.com
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e0d4e8acb3789c5a8651061fbab62ca24a45c063 upstream.
With gcc and W=1 option, there's a warning like this:
fs/f2fs/compress.c: In function ‘f2fs_init_page_array_cache’:
fs/f2fs/compress.c:1984:47: error: ‘%u’ directive writing between
1 and 7 bytes into a region of size between 5 and 8
[-Werror=format-overflow=]
1984 | sprintf(slab_name, "f2fs_page_array_entry-%u:%u", MAJOR(dev),
MINOR(dev));
| ^~
String "f2fs_page_array_entry-%u:%u" can up to 35. The first "%u" can up
to 4 and the second "%u" can up to 7, so total size is "24 + 4 + 7 = 35".
slab_name's size should be 35 rather than 32.
Cc: stable@vger.kernel.org
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f5f3bd903a5d3e3b2ba89f11e0e29db25e60c048 upstream.
Otherwise, we'll get a broken inode.
# touch $FILE
# f2fs_io setflags compression $FILE
# f2fs_io set_coption 2 8 $FILE
[ 112.227612] F2FS-fs (dm-51): sanity_check_compress_inode: inode (ino=8d3fe) has unsupported compress level: 0, run fsck to fix
Cc: stable@vger.kernel.org
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 50a472bbc79ff9d5a88be8019a60e936cadf9f13 upstream.
If we return the error, there's no way to recover the status as of now, since
fsck does not fix the xattr boundary issue.
Cc: stable@vger.kernel.org
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0cdc6f44e9fdc2d20d720145bf99a39f611f6d61 upstream.
In gfs2_fill_super(), when mounting a gfs2 filesystem is interrupted,
kthread_create() can return -EINTR. When that happens, we roll back
what has already been done and abort the mount.
Since commit 62dd0f98a0e5 ("gfs2: Flag a withdraw if init_threads()
fails), we are calling gfs2_withdraw_delayed() in gfs2_fill_super();
first via gfs2_make_fs_rw(), then directly. But gfs2_withdraw_delayed()
only marks the filesystem as withdrawing and relies on a caller further
up the stack to do the actual withdraw, which doesn't exist in the
gfs2_fill_super() case. Because the filesystem is marked as withdrawing
/ withdrawn, function gfs2_lm_unmount() doesn't release the dlm
lockspace, so when we try to mount that filesystem again, we get:
gfs2: fsid=gohan:gohan0: Trying to join cluster "lock_dlm", "gohan:gohan0"
gfs2: fsid=gohan:gohan0: dlm_new_lockspace error -17
Since commit b77b4a4815a9 ("gfs2: Rework freeze / thaw logic"), the
deadlock this gfs2_withdraw_delayed() call was supposed to work around
cannot occur anymore because freeze_go_callback() won't take the
sb->s_umount semaphore unconditionally anymore, so we can get rid of the
gfs2_withdraw_delayed() in gfs2_fill_super() entirely.
Reported-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: stable@vger.kernel.org # v6.5+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 776a838f1fa95670c1c1cf7109a898090b473fa3 upstream.
Running the fio command below on a ZNS device results in "Resource
temporarily unavailable" error.
$ sudo fio --name=w --directory=/mnt --filesize=1GB --bs=16MB --numjobs=16 \
--rw=write --ioengine=libaio --iodepth=128 --direct=1
fio: io_u error on file /mnt/w.2.0: Resource temporarily unavailable: write offset=117440512, buflen=16777216
fio: io_u error on file /mnt/w.2.0: Resource temporarily unavailable: write offset=134217728, buflen=16777216
...
This happens because -EAGAIN error returned from btrfs_reserve_extent()
called from btrfs_new_extent_direct() is spilling over to the userland.
btrfs_reserve_extent() returns -EAGAIN when there is no active zone
available. Then, the caller should wait for some other on-going IO to
finish a zone and retry the allocation.
This logic is already implemented for buffered write in cow_file_range(),
but it is missing for the direct IO counterpart. Implement the same logic
for it.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 2ce543f47843 ("btrfs: zoned: wait until zone is finished when allocation didn't progress")
CC: stable@vger.kernel.org # 6.1+
Tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7930d9e103700cde15833638855b750715c12091 upstream.
Because on v3 inodes, di_flushiter doesn't exist. It overlaps with
zero padding in the inode, except when NREXT64=1 configurations are
in use and the zero padding is no longer padding but holds the 64
bit extent counter.
This manifests obviously on big endian platforms (e.g. s390) because
the log dinode is in host order and the overlap is the LSBs of the
extent count field. It is not noticed on little endian machines
because the overlap is at the MSB end of the extent count field and
we need to get more than 2^^48 extents in the inode before it
manifests. i.e. the heat death of the universe will occur before we
see the problem in little endian machines.
This is a zero-day issue for NREXT64=1 configuraitons on big endian
machines. Fix it by only clearing di_flushiter on v2 inodes during
recovery.
Fixes: 9b7d16e34bbe ("xfs: Introduce XFS_DIFLAG2_NREXT64 and associated helpers")
cc: stable@kernel.org # 5.19+
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 37de5a80e932f828c34abeaae63170d73930dca3 upstream.
Each smb_rqst struct contains two things: an array of kvecs (rq_iov) that
contains the protocol data for an RPC op and an iterator (rq_iter) that
contains the data payload of an RPC op. When an smb_rqst is allocated
rq_iter is it always cleared, but we don't set it up unless we're going to
use it.
The functions that determines the size of the ciphertext buffer that will
be needed to encrypt a request, cifs_get_num_sgs(), assumes that rq_iter is
always initialised - and employs user_backed_iter() to check that the
iterator isn't user-backed. This used to incidentally work, because
->user_backed was set to false because the iterator has never been
initialised, but with commit f1b4cb650b9a0eeba206d8f069fcdc532bfbcd74[1]
which changes user_backed_iter() to determine this based on the iterator
type insted, a warning is now emitted:
WARNING: CPU: 7 PID: 4584 at fs/smb/client/cifsglob.h:2165 smb2_get_aead_req+0x3fc/0x420 [cifs]
...
RIP: 0010:smb2_get_aead_req+0x3fc/0x420 [cifs]
...
crypt_message+0x33e/0x550 [cifs]
smb3_init_transform_rq+0x27d/0x3f0 [cifs]
smb_send_rqst+0xc7/0x160 [cifs]
compound_send_recv+0x3ca/0x9f0 [cifs]
cifs_send_recv+0x25/0x30 [cifs]
SMB2_tcon+0x38a/0x820 [cifs]
cifs_get_smb_ses+0x69c/0xee0 [cifs]
cifs_mount_get_session+0x76/0x1d0 [cifs]
dfs_mount_share+0x74/0x9d0 [cifs]
cifs_mount+0x6e/0x2e0 [cifs]
cifs_smb3_do_mount+0x143/0x300 [cifs]
smb3_get_tree+0x15e/0x290 [cifs]
vfs_get_tree+0x2d/0xe0
do_new_mount+0x124/0x340
__se_sys_mount+0x143/0x1a0
The problem is that rq_iter was never set, so the type is 0 (ie. ITER_UBUF)
which causes user_backed_iter() to return true. The code doesn't
malfunction because it checks the size of the iterator - which is 0.
Fix cifs_get_num_sgs() to ignore rq_iter if its count is 0, thereby
bypassing the warnings.
It might be better to explicitly initialise rq_iter to a zero-length
ITER_BVEC, say, as it can always be reinitialised later.
Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Reported-by: Damian Tometzki <damian@riscv-rocks.de>
Closes: https://lore.kernel.org/r/ZUfQo47uo0p2ZsYg@fedora.fritz.box/
Tested-by: Damian Tometzki <damian@riscv-rocks.de>
Cc: stable@vger.kernel.org
cc: Eric Biggers <ebiggers@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f1b4cb650b9a0eeba206d8f069fcdc532bfbcd74 [1]
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6e5e64c9477d58e73cb1a0e83eacad1f8df247cf upstream.
If the mount command has specified multichannel as a mount option,
but multichannel is found to be unsupported by the server at the time
of mount, we set chan_max to 1. Which means that the user needs to
remount the share if the server starts supporting multichannel.
This change removes this reset. What it means is that if the user
specified multichannel or max_channels during mount, and at this
time, multichannel is not supported, but the server starts supporting
it at a later point, the client will be capable of scaling out the
number of channels.
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d9a6d78096056a3cb5c5f07a730ab92f2f9ac4e6 upstream.
During a session reconnect, it is possible that the
server moved to another physical server (happens in case
of Azure files). So at this time, force a query of server
interfaces again (in case of multichannel session), such
that the secondary channels connect to the right
IP addresses (possibly updated now).
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c3326a61cdbf3ce1273d9198b6cbf90965d7e029 upstream.
We introduced a helper function to be used by non-cifsd threads to
mark the connection for reconnect. For multichannel, when only
a particular channel needs to be reconnected, this had a bug.
This change fixes that by marking that particular channel
for reconnect.
Fixes: dca65818c80c ("cifs: use a different reconnect helper for non-cifsd threads")
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e6322fd177c6885a21dd4609dc5e5c973d1a2eb7 upstream.
All release_mid() callers seem to hold a reference of @mid so there is
no need to call kref_put(&mid->refcount, __release_mid) under
@server->mid_lock spinlock. If they don't, then an use-after-free bug
would have occurred anyways.
By getting rid of such spinlock also fixes a potential deadlock as
shown below
CPU 0 CPU 1
------------------------------------------------------------------
cifs_demultiplex_thread() cifs_debug_data_proc_show()
release_mid()
spin_lock(&server->mid_lock);
spin_lock(&cifs_tcp_ses_lock)
spin_lock(&server->mid_lock)
__release_mid()
smb2_find_smb_tcon()
spin_lock(&cifs_tcp_ses_lock) *deadlock*
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5c86919455c1edec99ebd3338ad213b59271a71b upstream.
The following UAF was triggered when running fstests generic/072 with
KASAN enabled against Windows Server 2022 and mount options
'multichannel,max_channels=2,vers=3.1.1,mfsymlinks,noperm'
BUG: KASAN: slab-use-after-free in smb2_query_info_compound+0x423/0x6d0 [cifs]
Read of size 8 at addr ffff888014941048 by task xfs_io/27534
CPU: 0 PID: 27534 Comm: xfs_io Not tainted 6.6.0-rc7 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
Call Trace:
dump_stack_lvl+0x4a/0x80
print_report+0xcf/0x650
? srso_alias_return_thunk+0x5/0x7f
? srso_alias_return_thunk+0x5/0x7f
? __phys_addr+0x46/0x90
kasan_report+0xda/0x110
? smb2_query_info_compound+0x423/0x6d0 [cifs]
? smb2_query_info_compound+0x423/0x6d0 [cifs]
smb2_query_info_compound+0x423/0x6d0 [cifs]
? __pfx_smb2_query_info_compound+0x10/0x10 [cifs]
? srso_alias_return_thunk+0x5/0x7f
? __stack_depot_save+0x39/0x480
? kasan_save_stack+0x33/0x60
? kasan_set_track+0x25/0x30
? ____kasan_slab_free+0x126/0x170
smb2_queryfs+0xc2/0x2c0 [cifs]
? __pfx_smb2_queryfs+0x10/0x10 [cifs]
? __pfx___lock_acquire+0x10/0x10
smb311_queryfs+0x210/0x220 [cifs]
? __pfx_smb311_queryfs+0x10/0x10 [cifs]
? srso_alias_return_thunk+0x5/0x7f
? __lock_acquire+0x480/0x26c0
? lock_release+0x1ed/0x640
? srso_alias_return_thunk+0x5/0x7f
? do_raw_spin_unlock+0x9b/0x100
cifs_statfs+0x18c/0x4b0 [cifs]
statfs_by_dentry+0x9b/0xf0
fd_statfs+0x4e/0xb0
__do_sys_fstatfs+0x7f/0xe0
? __pfx___do_sys_fstatfs+0x10/0x10
? srso_alias_return_thunk+0x5/0x7f
? lockdep_hardirqs_on_prepare+0x136/0x200
? srso_alias_return_thunk+0x5/0x7f
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Allocated by task 27534:
kasan_save_stack+0x33/0x60
kasan_set_track+0x25/0x30
__kasan_kmalloc+0x8f/0xa0
open_cached_dir+0x71b/0x1240 [cifs]
smb2_query_info_compound+0x5c3/0x6d0 [cifs]
smb2_queryfs+0xc2/0x2c0 [cifs]
smb311_queryfs+0x210/0x220 [cifs]
cifs_statfs+0x18c/0x4b0 [cifs]
statfs_by_dentry+0x9b/0xf0
fd_statfs+0x4e/0xb0
__do_sys_fstatfs+0x7f/0xe0
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Freed by task 27534:
kasan_save_stack+0x33/0x60
kasan_set_track+0x25/0x30
kasan_save_free_info+0x2b/0x50
____kasan_slab_free+0x126/0x170
slab_free_freelist_hook+0xd0/0x1e0
__kmem_cache_free+0x9d/0x1b0
open_cached_dir+0xff5/0x1240 [cifs]
smb2_query_info_compound+0x5c3/0x6d0 [cifs]
smb2_queryfs+0xc2/0x2c0 [cifs]
This is a race between open_cached_dir() and cached_dir_lease_break()
where the cache entry for the open directory handle receives a lease
break while creating it. And before returning from open_cached_dir(),
we put the last reference of the new @cfid because of
!@cfid->has_lease.
Besides the UAF, while running xfstests a lot of missed lease breaks
have been noticed in tests that run several concurrent statfs(2) calls
on those cached fids
CIFS: VFS: \\w22-root1.gandalf.test No task to wake, unknown frame...
CIFS: VFS: \\w22-root1.gandalf.test Cmd: 18 Err: 0x0 Flags: 0x1...
CIFS: VFS: \\w22-root1.gandalf.test smb buf 00000000715bfe83 len 108
CIFS: VFS: Dump pending requests:
CIFS: VFS: \\w22-root1.gandalf.test No task to wake, unknown frame...
CIFS: VFS: \\w22-root1.gandalf.test Cmd: 18 Err: 0x0 Flags: 0x1...
CIFS: VFS: \\w22-root1.gandalf.test smb buf 000000005aa7316e len 108
...
To fix both, in open_cached_dir() ensure that @cfid->has_lease is set
right before sending out compounded request so that any potential
lease break will be get processed by demultiplex thread while we're
still caching @cfid. And, if open failed for some reason, re-check
@cfid->has_lease to decide whether or not put lease reference.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d328c09ee9f15ee5a26431f5aad7c9239fa85e62 upstream.
Skip SMB sessions that are being teared down
(e.g. @ses->ses_status == SES_EXITING) in cifs_debug_data_proc_show()
to avoid use-after-free in @ses.
This fixes the following GPF when reading from /proc/fs/cifs/DebugData
while mounting and umounting
[ 816.251274] general protection fault, probably for non-canonical
address 0x6b6b6b6b6b6b6d81: 0000 [#1] PREEMPT SMP NOPTI
...
[ 816.260138] Call Trace:
[ 816.260329] <TASK>
[ 816.260499] ? die_addr+0x36/0x90
[ 816.260762] ? exc_general_protection+0x1b3/0x410
[ 816.261126] ? asm_exc_general_protection+0x26/0x30
[ 816.261502] ? cifs_debug_tcon+0xbd/0x240 [cifs]
[ 816.261878] ? cifs_debug_tcon+0xab/0x240 [cifs]
[ 816.262249] cifs_debug_data_proc_show+0x516/0xdb0 [cifs]
[ 816.262689] ? seq_read_iter+0x379/0x470
[ 816.262995] seq_read_iter+0x118/0x470
[ 816.263291] proc_reg_read_iter+0x53/0x90
[ 816.263596] ? srso_alias_return_thunk+0x5/0x7f
[ 816.263945] vfs_read+0x201/0x350
[ 816.264211] ksys_read+0x75/0x100
[ 816.264472] do_syscall_64+0x3f/0x90
[ 816.264750] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 816.265135] RIP: 0033:0x7fd5e669d381
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5923d6686a100c2b4cabd4c2ca9d5a12579c7614 upstream.
Fixes xfstest generic/728 which had been failing due to incorrect
ctime after setxattr and removexattr
Update ctime on successful set of xattr
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit de4eceab578ead12a71e5b5588a57e142bbe8ceb upstream.
When multiple mounts are to the same share from the same client it was not
possible to determine which section of /proc/fs/cifs/Stats (and DebugData)
correspond to that mount. In some recent examples this turned out to be
a significant problem when trying to analyze performance data - since
there are many cases where unless we know the tree id and session id we
can't figure out which stats (e.g. number of SMB3.1.1 requests by type,
the total time they take, which is slowest, how many fail etc.) apply to
which mount. The only existing loosely related ioctl CIFS_IOC_GET_MNT_INFO
does not return the information needed to uniquely identify which tcon
is which mount although it does return various flags and device info.
Add a cifs.ko ioctl CIFS_IOC_GET_TCON_INFO (0x800ccf0c) to return tid,
session id, tree connect count.
Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 475efd9808a3094944a56240b2711349e433fb66 upstream.
For example:
touch -h -t 02011200 testfile
where testfile is a symlink would not change the timestamp, but
touch -t 02011200 testfile
does work to change the timestamp of the target
Suggested-by: David Howells <dhowells@redhat.com>
Reported-by: Micah Veilleux <micah.veilleux@iba-group.com>
Closes: https://bugzilla.samba.org/show_bug.cgi?id=14476
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 72bc63f5e23a38b65ff2a201bdc11401d4223fa9 upstream.
Fixes some xfstests including generic/564 and generic/157
The "sfu" mount option can be useful for creating special files (character
and block devices in particular) but could not create FIFOs. It did
recognize existing empty files with the "system" attribute flag as FIFOs
but this is too general, so to support creating FIFOs more safely use a new
tag (but the same length as those for char and block devices ie "IntxLNK"
and "IntxBLK") "LnxFIFO" to indicate that the file should be treated as a
FIFO (when mounted with the "sfu"). For some additional context note that
"sfu" followed the way that "Services for Unix" on Windows handled these
special files (at least for character and block devices and symlinks),
which is different than newer Windows which can handle special files
as reparse points (which isn't an option to many servers).
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9b6304c1d53745c300b86f202d0dcff395e2d2db upstream.
struct timespec64 has unused bits in the tv_nsec field that can be used
for other purposes. In future patches, we're going to change how the
inode->i_ctime is accessed in certain inodes in order to make use of
them. In order to do that safely though, we'll need to eradicate raw
accesses of the inode->i_ctime field from the kernel.
Add new accessor functions for the ctime that we use to replace them.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Message-Id: <20230705185812.579118-2-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d3cc1b0be258191d6360c82ea158c2972f8d3991 upstream.
Since commit d7e7b9af104c ("fscrypt: stop using keyrings subsystem for
fscrypt_master_key"), xfstest generic/270 causes a WARNING when run on
f2fs with test_dummy_encryption in the mount options:
$ kvm-xfstests -c f2fs/encrypt generic/270
[...]
WARNING: CPU: 1 PID: 2453 at fs/crypto/keyring.c:240 fscrypt_destroy_keyring+0x1f5/0x260
The cause of the WARNING is that not all encrypted inodes have been
evicted before fscrypt_destroy_keyring() is called, which violates an
assumption. This happens because the test uses an external quota file,
which gets automatically encrypted due to test_dummy_encryption.
Encryption of quota files has never really been supported. On ext4,
ext4_quota_read() does not decrypt the data, so encrypted quota files
are always considered invalid on ext4. On f2fs, f2fs_quota_read() uses
the pagecache, so trying to use an encrypted quota file gets farther,
resulting in the issue described above being possible. But this was
never intended to be possible, and there is no use case for it.
Therefore, make the quota support layer explicitly reject using
IS_ENCRYPTED inodes when quotaon is attempted.
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230905003227.326998-1-ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
fs bdev
commit 61187fce8600e8ef90e601be84f9d0f3222c1206 upstream.
JBD2 makes sure journal data is fallen on fs device by sync_blockdev(),
however, other process could intercept the EIO information from bdev's
mapping, which leads journal recovering successful even EIO occurs during
data written back to fs device.
We found this problem in our product, iscsi + multipath is chosen for block
device of ext4. Unstable network may trigger kpartx to rescan partitions in
device mapper layer. Detailed process is shown as following:
mount kpartx irq
jbd2_journal_recover
do_one_pass
memcpy(nbh->b_data, obh->b_data) // copy data to fs dev from journal
mark_buffer_dirty // mark bh dirty
vfs_read
generic_file_read_iter // dio
filemap_write_and_wait_range
__filemap_fdatawrite_range
do_writepages
block_write_full_folio
submit_bh_wbc
>> EIO occurs in disk <<
end_buffer_async_write
mark_buffer_write_io_error
mapping_set_error
set_bit(AS_EIO, &mapping->flags) // set!
filemap_check_errors
test_and_clear_bit(AS_EIO, &mapping->flags) // clear!
err2 = sync_blockdev
filemap_write_and_wait
filemap_check_errors
test_and_clear_bit(AS_EIO, &mapping->flags) // false
err2 = 0
Filesystem is mounted successfully even data from journal is failed written
into disk, and ext4/ocfs2 could become corrupted.
Fix it by comparing the wb_err state in fs block device before recovering
and after recovering.
A reproducer can be found in the kernel bugzilla referenced below.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217888
Cc: stable@vger.kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230919012525.1783108-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b836c4d29f2744200b2af41e14bf50758dddc818 upstream.
Commit 18b44bc5a672 ("ovl: Always reevaluate the file signature for
IMA") forced signature re-evaulation on every file access.
Instead of always re-evaluating the file's integrity, detect a change
to the backing file, by comparing the cached file metadata with the
backing file's metadata. Verifying just the i_version has not changed
is insufficient. In addition save and compare the i_ino and s_dev
as well.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: Eric Snowberg <eric.snowberg@oracle.com>
Tested-by: Raul E Rangel <rrangel@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 11aeb97b45ad2e0040cbb2a589bc403152526345 upstream.
We have a random schedule_timeout() if the current transaction is
committing, which seems to be a holdover from the original delalloc
reservation code.
Remove this, we have the proper flushing stuff, we shouldn't be hoping
for random timing things to make everything work. This just induces
latency for no reason.
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eebff19acaa35820cb09ce2ccb3d21bee2156ffb upstream.
slab out-of-bounds write is caused by that offsets is bigger than pntsd
allocation size. This patch add the check to validate 3 offsets using
allocation size.
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-22271
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5a5409d90bd05f87fe5623a749ccfbf3f7c7d400 upstream.
If set_smb1_rsp_status() is not implemented, It will cause NULL pointer
dereferece error when client send malformed smb1 message.
This patch add set_smb1_rsp_status() to ignore malformed smb1 message.
Cc: stable@vger.kernel.org
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 807252f028c59b9a3bac4d62ad84761548c10f11 upstream.
Running smb2.rename test from Samba smbtorture suite against a kernel built
with lockdep triggers a "possible recursive locking detected" warning.
This is because mnt_want_write() is called twice with no mnt_drop_write()
in between:
-> ksmbd_vfs_mkdir()
-> ksmbd_vfs_kern_path_create()
-> kern_path_create()
-> filename_create()
-> mnt_want_write()
-> mnt_want_write()
Fix this by removing the mnt_want_write/mnt_drop_write calls from vfs
helpers that call kern_path_create().
Full lockdep trace below:
============================================
WARNING: possible recursive locking detected
6.6.0-rc5 #775 Not tainted
--------------------------------------------
kworker/1:1/32 is trying to acquire lock:
ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: ksmbd_vfs_mkdir+0xe1/0x410
but task is already holding lock:
ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: filename_create+0xb6/0x260
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(sb_writers#5);
lock(sb_writers#5);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by kworker/1:1/32:
#0: ffff8880064e4138 ((wq_completion)ksmbd-io){+.+.}-{0:0}, at: process_one_work+0x40e/0x980
#1: ffff888005b0fdd0 ((work_completion)(&work->work)){+.+.}-{0:0}, at: process_one_work+0x40e/0x980
#2: ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: filename_create+0xb6/0x260
#3: ffff8880057ce760 (&type->i_mutex_dir_key#3/1){+.+.}-{3:3}, at: filename_create+0x123/0x260
Cc: stable@vger.kernel.org
Fixes: 40b268d384a2 ("ksmbd: add mnt_want_write to ksmbd vfs functions")
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8b793bcda61f6c3ed4f5b2ded7530ef6749580cb upstream.
Setting softlockup_panic from do_sysctl_args() causes it to take effect
later in boot. The lockup detector is enabled before SMP is brought
online, but do_sysctl_args runs afterwards. If a user wants to set
softlockup_panic on boot and have it trigger should a softlockup occur
during onlining of the non-boot processors, they could do this prior to
commit f117955a2255 ("kernel/watchdog.c: convert {soft/hard}lockup boot
parameters to sysctl aliases"). However, after this commit the value
of softlockup_panic is set too late to be of help for this type of
problem. Restore the prior behavior.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: stable@vger.kernel.org
Fixes: f117955a2255 ("kernel/watchdog.c: convert {soft/hard}lockup boot parameters to sysctl aliases")
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8001f49394e353f035306a45bcf504f06fca6355 upstream.
The code that checks for unknown boot options is unaware of the sysctl
alias facility, which maps bootparams to sysctl values. If a user sets
an old value that has a valid alias, a message about an invalid
parameter will be printed during boot, and the parameter will get passed
to init. Fix by checking for the existence of aliased parameters in the
unknown boot parameter code. If an alias exists, don't return an error
or pass the value to init.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: stable@vger.kernel.org
Fixes: 0a477e1ae21b ("kernel/sysctl: support handling command line aliases")
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 181724fc72486dec2bec8803459be05b5162aaa8 ]
Remove extra check after condition, add check after generating key
for encryption. The check is needed to return non zero rc before
rewriting it with generating key for decryption.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Fixes: d70e9fa55884 ("cifs: try opening channels after mounting")
Signed-off-by: Ekaterina Esina <eesina@astralinux.ru>
Co-developed-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ff31ba19d732efb9aca3633935d71085e68d5076 ]
"host=" should start with ';' (as in cifs_get_spnego_key)
So its length should be 6.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Fixes: 7c9c3760b3a5 ("[CIFS] add constants for string lengths of keynames in SPNEGO upcall string")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Co-developed-by: Ekaterina Esina <eesina@astralinux.ru>
Signed-off-by: Ekaterina Esina <eesina@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 074d7306a4fe22fcac0b53f699f92757ab1cee99 ]
Commit 0abd1557e21c added rcu_dereference() for dereferencing ip->i_gl
in gfs2_permission. This now causes lockdep to complain when
gfs2_permission is called in non-RCU context:
WARNING: suspicious RCU usage in gfs2_permission
Switch to rcu_dereference_check() and check for the MAY_NOT_BLOCK flag
to shut up lockdep when we know that dereferencing ip->i_gl is safe.
Fixes: 0abd1557e21c ("gfs2: fix an oops in gfs2_permission")
Reported-by: syzbot+3e5130844b0c0e2b4948@syzkaller.appspotmail.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5cc7688bae7f0757c39c1d3dfdd827b724061067 ]
If the client is doing pnfs IO and Kerberos is configured and EXCHANGEID
successfully negotiated SP4_MACH_CRED and WRITE/COMMIT are on the
list of state protected operations, then we need to make sure to
choose the DS's rpc_client structure instead of the MDS's one.
Fixes: fb91fb0ee7b2 ("NFS: Move call to nfs4_state_protect_write() to nfs4_write_setup()")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6bd1a77dc72dea0b0d8b6014f231143984d18f6d ]
Currently when client sends an EXCHANGE_ID for a possible trunked
connection, for any error that happened, the trunk will be thrown
out. However, an NFS4ERR_DELAY is a transient error that should be
retried instead.
Fixes: e818bd085baf ("NFSv4.1 remove xprt from xprt_switch if session trunking test fails")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0abd1557e21c617bd13fc18f7725fc6363c05913 ]
In RCU mode, we might race with gfs2_evict_inode(), which zeroes
->i_gl. Freeing of the object it points to is RCU-delayed, so
if we manage to fetch the pointer before it's been replaced with
NULL, we are fine. Check if we'd fetched NULL and treat that
as "bail out and tell the caller to get out of RCU mode".
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4c6a08125f2249531ec01783a5f4317d7342add5 ]
When lots of quota changes are made, there may be cases in which an
inode's quota information is increased and then decreased, such as when
blocks are added to a file, then deleted from it. If the timing is
right, function do_qc can add pending quota changes to a transaction,
then later, another call to do_qc can negate those changes, resulting
in a net gain of 0. The quota_change information is recorded in the qc
buffer (and qd element of the inode as well). The buffer is added to the
transaction by the first call to do_qc, but a subsequent call changes
the value from non-zero back to zero. At that point it's too late to
remove the buffer_head from the transaction. Later, when the quota sync
code is called, the zero-change qd element is discovered and flagged as
an assert warning. If the fs is mounted with errors=panic, the kernel
will panic.
This is usually seen when files are truncated and the quota changes are
negated by punch_hole/truncate which uses gfs2_quota_hold and
gfs2_quota_unhold rather than block allocations that use gfs2_quota_lock
and gfs2_quota_unlock which automatically do quota sync.
This patch solves the problem by adding a check to qd_check_sync such
that net-zero quota changes already added to the transaction are no
longer deemed necessary to be synced, and skipped.
In this case references are taken for the qd and the slot from do_qc
so those need to be put. The normal sequence of events for a normal
non-zero quota change is as follows:
gfs2_quota_change
do_qc
qd_hold
slot_hold
Later, when the changes are to be synced:
gfs2_quota_sync
qd_fish
qd_check_sync
gets qd ref via lockref_get_not_dead
do_sync
do_qc(QC_SYNC)
qd_put
lockref_put_or_lock
qd_unlock
qd_put
lockref_put_or_lock
In the net-zero change case, we add a check to qd_check_sync so it puts
the qd and slot references acquired in gfs2_quota_change and skip the
unneeded sync.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9b5c6281838fc84683dd99b47302d81fce399918 ]
W=1 warns about null argument to kprintf:
In file included from fs/9p/xattr.c:12:
In function ‘v9fs_xattr_get’,
inlined from ‘v9fs_listxattr’ at fs/9p/xattr.c:142:9:
include/net/9p/9p.h:55:2: error: ‘%s’ directive argument is null
[-Werror=format-overflow=]
55 | _p9_debug(level, __func__, fmt, ##__VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use an empty string instead of :
- this is ok 9p-wise because p9pdu_vwritef serializes a null string
and an empty string the same way (one '0' word for length)
- since this degrades the print statements, add new single quotes for
xattr's name delimter (Old: "file = (null)", new: "file = ''")
Link: https://lore.kernel.org/r/20231008060138.517057-1-suhui@nfschina.com
Suggested-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Acked-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Message-ID: <20231025103445.1248103-2-asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9b4c8dd99fe48721410741651d426015e03a4b7a ]
Use f2fs_handle_error to record inconsistent node block error
and return -EFSCORRUPTED instead of -EINVAL.
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
