| Age | Commit message (Collapse) | Author |
|---|
|
When the main loop in xfs_filestream_pick_ag fails to find a suitable
AG it tries to just pick the online AG. But the loop for that uses
args->pag as loop iterator while the later code expects pag to be
set. Fix this by reusing the max_pag case for this last resort, and
also add a check for impossible case of no AG just to make sure that
the uninitialized pag doesn't even escape in theory.
Reported-by: syzbot+4125a3c514e3436a02e6@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: syzbot+4125a3c514e3436a02e6@syzkaller.appspotmail.com
Fixes: f8f1ed1ab3baba ("xfs: return a referenced perag from filestreams allocator")
Cc: <stable@vger.kernel.org> # v6.3
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
xfs_reclaim_inodes_count iterates over all AGs to sum up the reclaimable
inodes counts. There is no point in grabbing a reference to the them or
unlock the RCU critical section for each iteration, so switch to the
more efficient xas_for_each_marked iterator.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Pass the old perag structure to the tagged loop helpers so that they can
grab the old agno before releasing the reference. This removes the need
to separately track the agno and the iterator macro, and thus also
obsoletes the for_each_perag_tag syntactic sugar.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
This patch introduces two more new ioctls to manage atomic updates to
file contents -- XFS_IOC_START_COMMIT and XFS_IOC_COMMIT_RANGE. The
commit mechanism here is exactly the same as what XFS_IOC_EXCHANGE_RANGE
does, but with the additional requirement that file2 cannot have changed
since some sampling point. The start-commit ioctl performs the sampling
of file attributes.
Note: This patch currently samples i_ctime during START_COMMIT and
checks that it hasn't changed during COMMIT_RANGE. This isn't entirely
safe in kernels prior to 6.12 because ctime only had coarse grained
granularity and very fast updates could collide with a COMMIT_RANGE.
With the multi-granularity ctime introduced by Jeff Layton, it's now
possible to update ctime such that this does not happen.
It is critical, then, that this patch must not be backported to any
kernel that does not support fine-grained file change timestamps.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Since file_path() takes the output buffer as one of its arguments, we
might as well have it format directly into the tracepoint's char array
instead of wasting stack space.
Fixes: 3934e8ebb7cc6 ("xfs: create a big array data structure")
Fixes: 5076a6040ca16 ("xfs: support in-memory buffer cache targets")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403290419.HPcyvqZu-lkp@intel.com/
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
The grant heads in the log track the space reserved in the log for
running transactions. They do this by tracking how far ahead of the
tail that the reservation has reached, and the units for doing this
are {cycle,bytes} for the reserve head rather than {cycle,blocks}
which are normal used by LSNs.
This is annoyingly complex because we have to split, crack and
combined these tuples for any calculation we do to determine log
space and targets. This is computationally expensive as well as
difficult to do atomically and locklessly, as well as limiting the
size of the log to 2^32 bytes.
Really, though, all the grant heads are tracking is how much space
is currently available for use in the log. We can track this as a
simply byte count - we just don't care what the actual physical
location in the log the head and tail are at, just how much space we
have remaining before the head and tail overlap.
So, convert the grant heads to track the byte reservations that are
active rather than the current (cycle, offset) tuples. This means an
empty log has zero bytes consumed, and a full log is when the
reservations reach the size of the log minus the space consumed by
the AIL.
This greatly simplifies the accounting and checks for whether there
is space available. We no longer need to crack or combine LSNs to
determine how much space the log has left, nor do we need to look at
the head or tail of the log to determine how close to full we are.
There is, however, a complexity that needs to be handled. We know
how much space is being tracked in the AIL now via log->l_tail_space
and the log tickets track active reservations and return the unused
portions to the grant heads when ungranted. Unfortunately, we don't
track the used portion of the grant, so when we transfer log items
from the CIL to the AIL, the space accounted to the grant heads is
transferred to the log tail space. Hence when we move the AIL head
forwards on item insert, we have to remove that space from the grant
heads.
We also remove the xlog_verify_grant_tail() debug function as it is
no longer useful. The check it performs has been racy since delayed
logging was introduced, but now it is clearly only detecting false
positives so remove it.
The result of this substantially simpler accounting algorithm is an
increase in sustained transaction rate from ~1.3 million
transactions/s to ~1.9 million transactions/s with no increase in
CPU usage. We also remove the 32 bit space limitation on the grant
heads, which will allow us to increase the journal size beyond 2GB
in future.
Note that this renames the sysfs files exposing the log grant space
now that the values are exported in bytes. This allows xfstests
to auto-detect the old or new ABI.
[hch: move xlog_grant_sub_space out of line,
update the xlog_grant_{add,sub}_space prototypes,
rename the sysfs files to allow auto-detection in xfstests]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
The current implementation of xlog_assign_tail_lsn() assumes that
when the AIL is empty, the log tail matches the LSN of the last
written commit record. This is recorded in xlog_state_set_callback()
as log->l_last_sync_lsn when the iclog state changes to
XLOG_STATE_CALLBACK. This change is then immediately followed by
running the callbacks on the iclog which then insert the log items
into the AIL at the "commit lsn" of that checkpoint.
The AIL tracks log items via the start record LSN of the checkpoint,
not the commit record LSN. This is because we can pipeline multiple
checkpoints, and so the start record of checkpoint N+1 can be
written before the commit record of checkpoint N. i.e:
start N commit N
+-------------+------------+----------------+
start N+1 commit N+1
The tail of the log cannot be moved to the LSN of commit N when all
the items of that checkpoint are written back, because then the
start record for N+1 is no longer in the active portion of the log
and recovery will fail/corrupt the filesystem.
Hence when all the log items in checkpoint N are written back, the
tail of the log most now only move as far forwards as the start LSN
of checkpoint N+1.
Hence we cannot use the maximum start record LSN the AIL sees as a
replacement the pointer to the current head of the on-disk log
records. However, we currently only use the l_last_sync_lsn when the
AIL is empty - when there is no start LSN remaining, the tail of the
log moves to the LSN of the last commit record as this is where
recovery needs to start searching for recoverable records. THe next
checkpoint will have a start record LSN that is higher than
l_last_sync_lsn, and so everything still works correctly when new
checkpoints are written to an otherwise empty log.
l_last_sync_lsn is an atomic variable because it is currently
updated when an iclog with callbacks attached moves to the CALLBACK
state. While we hold the icloglock at this point, we don't hold the
AIL lock. When we assign the log tail, we hold the AIL lock, not the
icloglock because we have to look up the AIL. Hence it is an atomic
variable so it's not bound to a specific lock context.
However, the iclog callbacks are only used for CIL checkpoints. We
don't use callbacks with unmount record writes, so the
l_last_sync_lsn variable only gets updated when we are processing
CIL checkpoint callbacks. And those callbacks run under AIL lock
contexts, not icloglock context. The CIL checkpoint already knows
what the LSN of the iclog the commit record was written to (obtained
when written into the iclog before submission) and so we can update
the l_last_sync_lsn under the AIL lock in this callback. No other
iclog callbacks will run until the currently executing one
completes, and hence we can update the l_last_sync_lsn under the AIL
lock safely.
This means l_last_sync_lsn can move to the AIL as the "ail_head_lsn"
and it can be used to replace the atomic l_last_sync_lsn in the
iclog code. This makes tracking the log tail belong entirely to the
AIL, rather than being smeared across log, iclog and AIL state and
locking.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Pass the incore refcount intent structure to the tracepoints instead of
open-coding the argument passing.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Prepare the rest of refcount btree tracepoints for use with realtime
reflink by making them take the btree cursor object as a parameter.
This will save us a lot of trouble later on.
Remove the xfs_refcount_recover_extent tracepoint since it's already
covered by other refcount tracepoints.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
The only user of the "ag" tracepoint event classes is the refcount
btree, so rename them to make that obvious and make them take the btree
cursor to simplify the arguments. This will save us a lot of trouble
later on.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Convert all the refcount tracepoints to use the btree error tracepoint
class.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Pass the incore rmap structure to the tracepoints instead of open-coding
the argument passing.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Prepare the rmap btree tracepoints for use with realtime rmap btrees by
making them take the btree cursor object as a parameter. This will save
us a lot of trouble later on.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Create a new tracepoint class for btree-related errors, then convert all
the rmap tracepoints to use it. Also fix the one tracepoint that was
abusing the old class by making it a separate tracepoint.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Pass the incore EFI structure to the tracepoints instead of open-coding
the argument passing. This cleans up the call sites a bit.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Implement FITRIM for the realtime device by pretending that it's
"space" immediately after the data device. We have to hold the
rtbitmap ILOCK while the discard operations are ongoing because there's
no busy extent tracking for the rt volume to prevent reallocations.
Cc: Konst Mayer <cdlscpmv@gmail.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
|
|
This patch adds a pair of new file ioctls to retrieve the parent pointer
of a given inode. They both return the same results, but one operates
on the file descriptor passed to ioctl() whereas the other allows the
caller to specify a file handle for which the caller wants results.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Add the new parent attribute type. XFS_ATTR_PARENT is used only for parent pointer
entries; it uses reserved blocks like XFS_ATTR_ROOT.
Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
This field only ever contains XATTR_{CREATE,REPLACE}, and it only goes
as deep as xfs_attr_set. Remove the field from the structure and
replace it with an enum specifying exactly what kind of change we want
to make to the xattr structure. Upsert is the name that we'll give to
the flags==0 operation, because we're either updating an existing value
or inserting it, and the caller doesn't care.
Note: The "UPSERTR" name created here is to make userspace porting
easier. It will be removed in the next patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
xfs_mod_freecounter has two entirely separate code paths for adding or
subtracting from the free counters. Only the subtract case looks at the
rsvd flag and can return an error.
Split xfs_mod_freecounter into separate helpers for subtracting or
adding the freecounter, and remove all the impossible to reach error
handling for the addition case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
If the extended attributes look bad, try to sift through the rubble to
find whatever keys/values we can, stage a new attribute structure in a
temporary file and use the atomic extent swapping mechanism to commit
the results in bulk.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Add an explicit owner field to xfs_da_args, which will make it easier
for online fsck to set the owner field of the temporary directory and
xattr structures that it builds to repair damaged metadata.
Note: I hopefully found all the xfs_da_args definitions by looking for
automatic stack variable declarations and xfs_da_args.dp assignments:
git grep -E '(args.*dp =|struct xfs_da_args[[:space:]]*[a-z0-9][a-z0-9]*)'
Note that callers of xfs_attr_{get,set,change} can set the owner to zero
(or leave it unset) to have the default set to args->dp.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Add a new file mapping exchange flag that enables us to perform
post-exchange processing on file2 once we're done exchanging the extent
mappings. If we were swapping mappings between extended attribute
forks, we want to be able to convert file2's attr fork from block to
inline format.
(This implies that all fork contents are exchanged.)
This isn't used anywhere right now, but we need to have the basic ondisk
flags in place so that a future online xattr repair feature can create
salvaged attrs in a temporary file and exchange the attr fork mappings
when ready. If one file is in extents format and the other is inline,
we will have to promote both to extents format to perform the exchange.
After the exchange, we can try to condense the fixed file's attr fork
back down to inline format if possible.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
So far, we've constructed the front end of the file range exchange code
that does all the checking; and the back end of the file mapping
exchange code that actually does the work. Glue these two pieces
together so that we can turn on the functionality.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Now that we've created the skeleton of a log intent item to track and
restart file mapping exchange operations, add the upper level logic to
commit intent items and turn them into concrete work recorded in the
log. This builds on the existing bmap update intent items that have
been around for a while now.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Fix some inconsistencies in the xmbuf tracepoints -- they should be
reporting the major/minor of the filesystem that they're associated
with, so that we have some clue on whose behalf the xmbuf was created.
Fix the xmbuf_free tracepoint to report the same.
Don't call the trace function until the xmbuf is fully initialized.
Fixes: 5076a6040ca1 ("xfs: support in-memory buffer cache target")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Extend the bmap update (BUI) log items with a new realtime flag that
indicates that the updates apply against a realtime file's data fork.
We'll wire up the actual code later.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Pass the incore bmap structure to the tracepoints instead of open-coding
the argument passing.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
We're about to start adding support for deferred log intent items for
realtime extents, so split these four types into separate classes so
that we can customize them as the transition happens.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
As we've noted in various places, all current users of in-memory btrees
are online fsck. Online fsck only stages a btree long enough to rebuild
an ondisk data structure, which means that the in-memory btree is
ephemeral. Furthermore, if we encounter /any/ errors while updating an
in-memory btree, all we do is tear down all the staged data and return
an errno to userspace. In-memory btrees need not be transactional, so
their buffers should not be committed to the ondisk log, nor should they
be checkpointed by the AIL. That's just as well since the ephemeral
nature of the btree means that the buftarg and the buffers may disappear
quickly anyway.
Therefore, we need a way to launder the btree buffers that get attached
to the transaction by the generic btree code. Because the buffers are
directly mapped to backing file pages, there's no need to bwrite them
back to the tmpfs file. All we need to do is clean enough of the buffer
log item state so that the bli can be detached from the buffer, remove
the bli from the transaction's log item list, and reset the transaction
dirty state as if the laundered items had never been there.
For simplicity, create xfbtree transaction commit and cancel helpers
that launder the in-memory btree buffers for callers. Once laundered,
call the write verifier on non-stale buffers to avoid integrity issues,
or punch a hole in the backing file for stale buffers.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Adapt the generic btree cursor code to be able to create a btree whose
buffers come from a (presumably in-memory) buftarg with a header block
that's specific to in-memory btrees. We'll connect this to other parts
of online scrub in the next patches.
Note that in-memory btrees always have a block size matching the system
memory page size for efficiency reasons. There are also a few things we
need to do to finalize a btree update; that's covered in the next patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Allow the buffer cache to target in-memory files by making it possible
to have a buftarg that maps pages from private shmem files. As the
prevous patch alludes, the in-memory buftarg contains its own cache,
points to a shmem file, and does not point to a block_device.
The next few patches will make it possible to construct an xfs_btree in
pageable memory by using this buftarg.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
The last checks for bc_btnum can be replaced with helpers that check
the btree ops. This allows adding new btrees to XFS without having
to update a global enum.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: complete the ops predicates]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
The btnum in struct xfs_btree_ops is often used for printing a symbolic
name for the btree. Add a name field to the ops structure and use that
directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Using arrays of largely unrelated fields that use the btree number
as index is not very robust. Split the arrays into three separate
fields instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Two of the btree cursor flags are always used together and encode
the fundamental btree type. There currently are two such types:
1) an on-disk AG-rooted btree with 32-bit pointers
2) an on-disk inode-rooted btree with 64-bit pointers
and we're about to add:
3) an in-memory btree with 64-bit pointers
Introduce a new enum and a new type field in struct xfs_btree_geom
to encode this type directly instead of using flags and change most
code to switch on this enum.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: make the pointer lengths explicit]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Make the pointer length an explicit field in the btree operations
structure so that the next patch (which introduces an explicit btree
type enum) doesn't have to play a bunch of awkward games with inferring
the pointer length from the enumeration.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Certain btree flags never change for the life of a btree cursor because
they describe the geometry of the btree itself. Encode these in the
btree ops structure and reduce the amount of code required in each btree
type's init_cursor functions. This also frees up most of the bits in
bc_flags.
A previous version of this patch also converted the open-coded flags
logic to helpers. This was removed due to the pending refactoring (that
follows this patch) to eliminate most of the state flags.
Conversion script:
sed \
-e 's/XFS_BTREE_LONG_PTRS/XFS_BTGEO_LONG_PTRS/g' \
-e 's/XFS_BTREE_ROOT_IN_INODE/XFS_BTGEO_ROOT_IN_INODE/g' \
-e 's/XFS_BTREE_LASTREC_UPDATE/XFS_BTGEO_LASTREC_UPDATE/g' \
-e 's/XFS_BTREE_OVERLAPPING/XFS_BTGEO_OVERLAPPING/g' \
-e 's/cur->bc_flags & XFS_BTGEO_/cur->bc_ops->geom_flags \& XFS_BTGEO_/g' \
-i $(git ls-files fs/xfs/*.[ch] fs/xfs/libxfs/*.[ch] fs/xfs/scrub/*.[ch])
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Don't waste tracepoint segment memory on per-btree block allocation
tracepoints when we can do it from the generic btree code.
With this patch applied, two tracepoints are collapsed into one
tracepoint, with the following effects on objdump -hx xfs.ko output:
Before:
10 __tracepoints_ptrs 00000b38 0000000000000000 0000000000000000 001412f0 2**2
14 __tracepoints_strings 00005433 0000000000000000 0000000000000000 001689a0 2**5
29 __tracepoints 00010d30 0000000000000000 0000000000000000 0023fe00 2**5
After:
10 __tracepoints_ptrs 00000b34 0000000000000000 0000000000000000 001417b0 2**2
14 __tracepoints_strings 00005413 0000000000000000 0000000000000000 00168e80 2**5
29 __tracepoints 00010cd0 0000000000000000 0000000000000000 00240760 2**5
Column 3 is the section size in bytes; removing these two tracepoints
reduces the size of the ELF segments by 132 bytes.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Don't waste memory on extra per-btree block freeing tracepoints when we
can do it from the generic btree code.
With this patch applied, two tracepoints are collapsed into one
tracepoint, with the following effects on objdump -hx xfs.ko output:
Before:
10 __tracepoints_ptrs 00000b3c 0000000000000000 0000000000000000 00140eb0 2**2
14 __tracepoints_strings 00005453 0000000000000000 0000000000000000 00168540 2**5
29 __tracepoints 00010d90 0000000000000000 0000000000000000 0023f5e0 2**5
After:
10 __tracepoints_ptrs 00000b38 0000000000000000 0000000000000000 001412f0 2**2
14 __tracepoints_strings 00005433 0000000000000000 0000000000000000 001689a0 2**5
29 __tracepoints 00010d30 0000000000000000 0000000000000000 0023fe00 2**5
Column 3 is the section size in bytes; removing these two tracepoints
reduces the size of the ELF segments by 132 bytes.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
If an unhealthy inode gets inactivated, remember this fact in the
per-fs health summary.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Split the setting of the sick and checked masks into separate functions
as part of preparing to add the ability for regular runtime fs code
(i.e. not scrub) to mark metadata structures sick when corruptions are
found. Improve the documentation of libxfs' requirements for helper
behavior.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
kmem_alloc() is just a thin wrapper around kmalloc() these days.
Convert everything to use kmalloc() so we can get rid of the
wrapper.
Note: the transaction region allocation in xlog_add_to_transaction()
can be a high order allocation. Converting it to use
kmalloc(__GFP_NOFAIL) results in warnings in the page allocation
code being triggered because the mm subsystem does not want us to
use __GFP_NOFAIL with high order allocations like we've been doing
with the kmem_alloc() wrapper for a couple of decades. Hence this
specific case gets converted to xlog_kvmalloc() rather than
kmalloc() to avoid this issue.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Instead of tracing the address of the recovery handler, use the name
in the defer op, similar to other defer ops related tracepoints.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
The dfp_type field in struct xfs_defer_pending is only used to either
look up the operations associated with the pending word or in trace
points. Replace it with a direct pointer to the operations vector,
and store a pretty name in the vector for tracing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Consolidate the xfs_attr_defer_* helpers into a single xfs_attr_defer_add
one that picks the right dela_state based on the passed in operation.
Also move to a single trace point as the actual operation is visible
through the flags in the delta_state passed to the trace point.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Traditionally, all pending deferred work attached to a transaction is
finished when one of the xfs_defer_finish* functions is called.
However, online repair wants to be able to allocate space for a new data
structure, format a new metadata structure into the allocated space, and
commit that into the filesystem.
As a hedge against system crashes during repairs, we also want to log
some EFI items for the allocated space speculatively, and cancel them if
we elect to commit the new data structure.
Therefore, introduce the idea of pausing a pending deferred work item.
Log intent items are still created for paused items and relogged as
necessary. However, paused items are pushed onto a side list before we
start calling ->finish_item, and the whole list is reattach to the
transaction afterwards. New work items are never attached to paused
pending items.
Modify xfs_defer_cancel to clean up pending deferred work items holding
a log intent item but not a log intent done item, since that is now
possible.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
The previous patch to reload unrecovered unlinked inodes when adding a
newly created inode to the unlinked list is missing a key piece of
functionality. It doesn't handle the case that someone calls xfs_iget
on an inode that is not the last item in the incore list. For example,
if at mount time the ondisk iunlink bucket looks like this:
AGI -> 7 -> 22 -> 3 -> NULL
None of these three inodes are cached in memory. Now let's say that
someone tries to open inode 3 by handle. We need to walk the list to
make sure that inodes 7 and 22 get loaded cold, and that the
i_prev_unlinked of inode 3 gets set to 22.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
