| Age | Commit message (Collapse) | Author |
|---|
|
commit a08f789d2ab5242c07e716baf9a835725046be89 upstream.
Hulk Robot reported a BUG_ON:
==================================================================
kernel BUG at fs/ext4/mballoc.c:3211!
[...]
RIP: 0010:ext4_mb_mark_diskspace_used.cold+0x85/0x136f
[...]
Call Trace:
ext4_mb_new_blocks+0x9df/0x5d30
ext4_ext_map_blocks+0x1803/0x4d80
ext4_map_blocks+0x3a4/0x1a10
ext4_writepages+0x126d/0x2c30
do_writepages+0x7f/0x1b0
__filemap_fdatawrite_range+0x285/0x3b0
file_write_and_wait_range+0xb1/0x140
ext4_sync_file+0x1aa/0xca0
vfs_fsync_range+0xfb/0x260
do_fsync+0x48/0xa0
[...]
==================================================================
Above issue may happen as follows:
-------------------------------------
do_fsync
vfs_fsync_range
ext4_sync_file
file_write_and_wait_range
__filemap_fdatawrite_range
do_writepages
ext4_writepages
mpage_map_and_submit_extent
mpage_map_one_extent
ext4_map_blocks
ext4_mb_new_blocks
ext4_mb_normalize_request
>>> start + size <= ac->ac_o_ex.fe_logical
ext4_mb_regular_allocator
ext4_mb_simple_scan_group
ext4_mb_use_best_found
ext4_mb_new_preallocation
ext4_mb_new_inode_pa
ext4_mb_use_inode_pa
>>> set ac->ac_b_ex.fe_len <= 0
ext4_mb_mark_diskspace_used
>>> BUG_ON(ac->ac_b_ex.fe_len <= 0);
we can easily reproduce this problem with the following commands:
`fallocate -l100M disk`
`mkfs.ext4 -b 1024 -g 256 disk`
`mount disk /mnt`
`fsstress -d /mnt -l 0 -n 1000 -p 1`
The size must be smaller than or equal to EXT4_BLOCKS_PER_GROUP.
Therefore, "start + size <= ac->ac_o_ex.fe_logical" may occur
when the size is truncated. So start should be the start position of
the group where ac_o_ex.fe_logical is located after alignment.
In addition, when the value of fe_logical or EXT4_BLOCKS_PER_GROUP
is very large, the value calculated by start_off is more accurate.
Cc: stable@kernel.org
Fixes: cd648b8a8fd5 ("ext4: trim allocation requests to group size")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220528110017.354175-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bfdc502a4a4c058bf4cbb1df0c297761d528f54d ]
In case of flex_bg feature (which is by default enabled), extents for
any given inode might span across blocks from two different block group.
ext4_mb_mark_bb() only reads the buffer_head of block bitmap once for the
starting block group, but it fails to read it again when the extent length
boundary overflows to another block group. Then in this below loop it
accesses memory beyond the block group bitmap buffer_head and results
into a data abort.
for (i = 0; i < clen; i++)
if (!mb_test_bit(blkoff + i, bitmap_bh->b_data) == !state)
already++;
This patch adds this functionality for checking block group boundary in
ext4_mb_mark_bb() and update the buffer_head(bitmap_bh) for every different
block group.
w/o this patch, I was easily able to hit a data access abort using Power platform.
<...>
[ 74.327662] EXT4-fs error (device loop3): ext4_mb_generate_buddy:1141: group 11, block bitmap and bg descriptor inconsistent: 21248 vs 23294 free clusters
[ 74.533214] EXT4-fs (loop3): shut down requested (2)
[ 74.536705] Aborting journal on device loop3-8.
[ 74.702705] BUG: Unable to handle kernel data access on read at 0xc00000005e980000
[ 74.703727] Faulting instruction address: 0xc0000000007bffb8
cpu 0xd: Vector: 300 (Data Access) at [c000000015db7060]
pc: c0000000007bffb8: ext4_mb_mark_bb+0x198/0x5a0
lr: c0000000007bfeec: ext4_mb_mark_bb+0xcc/0x5a0
sp: c000000015db7300
msr: 800000000280b033
dar: c00000005e980000
dsisr: 40000000
current = 0xc000000027af6880
paca = 0xc00000003ffd5200 irqmask: 0x03 irq_happened: 0x01
pid = 5167, comm = mount
<...>
enter ? for help
[c000000015db7380] c000000000782708 ext4_ext_clear_bb+0x378/0x410
[c000000015db7400] c000000000813f14 ext4_fc_replay+0x1794/0x2000
[c000000015db7580] c000000000833f7c do_one_pass+0xe9c/0x12a0
[c000000015db7710] c000000000834504 jbd2_journal_recover+0x184/0x2d0
[c000000015db77c0] c000000000841398 jbd2_journal_load+0x188/0x4a0
[c000000015db7880] c000000000804de8 ext4_fill_super+0x2638/0x3e10
[c000000015db7a40] c0000000005f8404 get_tree_bdev+0x2b4/0x350
[c000000015db7ae0] c0000000007ef058 ext4_get_tree+0x28/0x40
[c000000015db7b00] c0000000005f6344 vfs_get_tree+0x44/0x100
[c000000015db7b70] c00000000063c408 path_mount+0xdd8/0xe70
[c000000015db7c40] c00000000063c8f0 sys_mount+0x450/0x550
[c000000015db7d50] c000000000035770 system_call_exception+0x4a0/0x4e0
[c000000015db7e10] c00000000000c74c system_call_common+0xec/0x250
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/2609bc8f66fc15870616ee416a18a3d392a209c4.1644992609.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a5c0e2fdf7cea535ba03259894dc184e5a4c2800 ]
ext4_mb_mark_bb() currently wrongly calculates cluster len (clen) and
flex_group->free_clusters. This patch fixes that.
Identified based on code review of ext4_mb_mark_bb() function.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/a0b035d536bafa88110b74456853774b64c8ac40.1644992609.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 31a074a0c62dc0d2bfb9b543142db4fe27f9e5eb upstream.
For now in ext4_mb_new_blocks_simple, if we found a block which
should be excluded then will switch to next group, this may
probably cause 'group' run out of range.
Change to check next block in the same group when get a block should
be excluded. Also change the search range to EXT4_CLUSTERS_PER_GROUP
and add error checking.
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20220110035141.1980-3-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8c80fb312d7abf8bcd66cca1d843a80318a2c522 upstream.
We found on older kernel (3.10) that in the scenario of insufficient
disk space, system may trigger an ABBA deadlock problem, it seems that
this problem still exists in latest kernel, try to fix it here. The
main process triggered by this problem is that task A occupies the PA
and waits for the jbd2 transaction finish, the jbd2 transaction waits
for the completion of task B's IO (plug_list), but task B waits for
the release of PA by task A to finish discard, which indirectly forms
an ABBA deadlock. The related calltrace is as follows:
Task A
vfs_write
ext4_mb_new_blocks()
ext4_mb_mark_diskspace_used() JBD2
jbd2_journal_get_write_access() -> jbd2_journal_commit_transaction()
->schedule() filemap_fdatawait()
| |
| Task B |
| do_unlinkat() |
| ext4_evict_inode() |
| jbd2_journal_begin_ordered_truncate() |
| filemap_fdatawrite_range() |
| ext4_mb_new_blocks() |
-ext4_mb_discard_group_preallocations() <-----
Here, try to cancel ext4_mb_discard_group_preallocations() internal
retry due to PA busy, and do a limited number of retries inside
ext4_mb_discard_preallocations(), which can circumvent the above
problems, but also has some advantages:
1. Since the PA is in a busy state, if other groups have free PAs,
keeping the current PA may help to reduce fragmentation.
2. Continue to traverse forward instead of waiting for the current
group PA to be released. In most scenarios, the PA discard time
can be reduced.
However, in the case of smaller free space, if only a few groups have
space, then due to multiple traversals of the group, it may increase
CPU overhead. But in contrast, I feel that the overall benefit is
better than the cost.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1637630277-23496-1-git-send-email-brookxu.cn@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 173b6e383d2a204c9921ffc1eca3b87aa2106c33 ]
A user reported FITRIM ioctl failing for him on ext4 on some devices
without apparent reason. After some debugging we've found out that
these devices (being LVM volumes) report rather large discard
granularity of 42MB and the filesystem had 1k blocksize and thus group
size of 8MB. Because ext4 FITRIM implementation puts discard
granularity into minlen, ext4_trim_fs() declared the trim request as
invalid. However just silently doing nothing seems to be a more
appropriate reaction to such combination of parameters since user did
not specify anything wrong.
CC: Lukas Czerner <lczerner@redhat.com>
Fixes: 5c2ed62fd447 ("ext4: Adjust minlen with discard_granularity in the FITRIM ioctl")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211112152202.26614-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit cd84bbbac12a173a381a64c6ec8b76a5277b87b5 upstream.
Commit 5d1b1b3f492f ("ext4: fix BUG when calling ext4_error with locked
block group") introduces ext4_grp_locked_error to handle unlocking a
group in error cases. Otherwise, there is a possibility of a sleep while
atomic. However, since 43c73221b3b1 ("ext4: replace BUG_ON with WARN_ON
in mb_find_extent()"), mb_find_extent() has contained a ext4_error()
call while a group spinlock is held. Replace this with
ext4_grp_locked_error.
Fixes: 43c73221b3b1 ("ext4: replace BUG_ON with WARN_ON in mb_find_extent()")
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Link: https://lore.kernel.org/r/20210623232114.34457-1-stephen.s.brennan@oracle.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a8867f4e3809050571c98de7a2d465aff5e4daf5 upstream.
Fix a memory leak discovered by syzbot when a file system is corrupted
with an illegally large s_log_groups_per_flex.
Reported-by: syzbot+aa12d6106ea4ca1b6aae@syzkaller.appspotmail.com
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20210412073837.1686-1-phil@philpotter.co.uk
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f91436d55a279f045987e8b8c1385585dca54be9 upstream.
syzbot found UBSAN: shift-out-of-bounds in ext4_mb_init [1], when
1 << sbi->s_es->s_log_groups_per_flex is bigger than UINT_MAX,
where sbi->s_mb_prefetch is unsigned integer type.
32 is the maximum allowed power of s_log_groups_per_flex. Following if
check will also trigger UBSAN shift-out-of-bound:
if (1 << sbi->s_es->s_log_groups_per_flex >= UINT_MAX) {
So I'm checking it against the raw number, perhaps there is another way
to calculate UINT_MAX max power. Also use min_t as to make sure it's
uint type.
[1] UBSAN: shift-out-of-bounds in fs/ext4/mballoc.c:2713:24
shift exponent 60 is too large for 32-bit type 'int'
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x137/0x1be lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:148 [inline]
__ubsan_handle_shift_out_of_bounds+0x432/0x4d0 lib/ubsan.c:395
ext4_mb_init_backend fs/ext4/mballoc.c:2713 [inline]
ext4_mb_init+0x19bc/0x19f0 fs/ext4/mballoc.c:2898
ext4_fill_super+0xc2ec/0xfbe0 fs/ext4/super.c:4983
Reported-by: syzbot+a8b4b0c60155e87e9484@syzkaller.appspotmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210224095800.3350002-1-snovitoll@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 82ef1370b0c1757ab4ce29f34c52b4e93839b0aa ]
Commit cfd732377221 ("ext4: add prefetching for block allocation
bitmaps") introduced block bitmap prefetch, and expects to read block
bitmaps of flex_bg through an IO. However, it seems to ignore the
value range of s_log_groups_per_flex. In the scenario where the value
of s_log_groups_per_flex is greater than 27, s_mb_prefetch or
s_mb_prefetch_limit will overflow, cause a divide zero exception.
In addition, the logic of calculating nr is also flawed, because the
size of flexbg is fixed during a single mount, but s_mb_prefetch can
be modified, which causes nr to fail to meet the value condition of
[1, flexbg_size].
To solve this problem, we need to set the upper limit of
s_mb_prefetch. Since we expect to load block bitmaps of a flex_bg
through an IO, we can consider determining a reasonable upper limit
among the IO limit parameters. After consideration, we chose
BLK_MAX_SEGMENT_SIZE. This is a good choice to solve divide zero
problem and avoiding performance degradation.
[ Some minor code simplifications to make the changes easy to follow -- TYT ]
Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Samuel Liao <samuelliao@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/1607051143-24508-1-git-send-email-brookxu@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit cca415537244f6102cbb09b5b90db6ae2c953bdd upstream.
When freeing metadata, we will create an ext4_free_data and
insert it into the pending free list. After the current
transaction is committed, the object will be freed.
ext4_mb_free_metadata() will check whether the area to be freed
overlaps with the pending free list. If true, return directly. At this
time, ext4_free_data is leaked. Fortunately, the probability of this
problem is small, since it only occurs if the file system is corrupted
such that a block is claimed by more one inode and those inodes are
deleted within a single jbd2 transaction.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Link: https://lore.kernel.org/r/1604764698-4269-8-git-send-email-brookxu@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fast commit file system states are recorded in
sbi->s_mount_flags. Fast commit expects these bit manipulations to be
atomic. This patch adds helpers to make those modifications atomic.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-21-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Smatch complains that "i" can be uninitialized if we don't enter the
loop. I don't know if it's possible but we may as well silence this
warning.
[ Initialize i to sb->s_blocksize instead of 0. The only way the for
loop could be skipped entirely is the in-memory data structures, in
particular the bh->b_data for the on-disk superblock has gotten
corrupted enough that calculated value of group is >= to
ext4_get_groups_count(sb). In that case, we want to exit
immediately without allocating a block. -- TYT ]
Fixes: 8016e29f4362 ("ext4: fast commit recovery path")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201030114620.GB3251003@mwanda
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
This patch adds fast commit recovery path support for Ext4 file
system. We add several helper functions that are similar in spirit to
e2fsprogs journal recovery path handlers. Example of such functions
include - a simple block allocator, idempotent block bitmap update
function etc. Using these routines and the fast commit log in the fast
commit area, the recovery path (ext4_fc_replay()) performs fast commit
log recovery.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-8-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Make bb_check_counter per group, so each group has the same chance
to be checked, which can expose errors more easily.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Link: https://lore.kernel.org/r/1601292995-32205-2-git-send-email-brookxu@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The comment near mb_buddy_adjust_border seems meaningless, just
clear it.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Link: https://lore.kernel.org/r/1601292995-32205-1-git-send-email-brookxu@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Delete repeated words in fs/ext4/.
{the, this, of, we, after}
Also change spelling of "xttr" in inline.c to "xattr" in 2 places.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200805024850.12129-1-rdunlap@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_mb_discard_group_preallocations() can be releasing group lock with
preallocations accumulated on its local list. Thus although
discard_pa_seq was incremented and concurrent allocating processes will
be retrying allocations, it can happen that premature ENOSPC error is
returned because blocks used for preallocations are not available for
reuse yet. Make sure we always free locally accumulated preallocations
before releasing group lock.
Fixes: 07b5b8e1ac40 ("ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200924150959.4335-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
As we test disk offline/online with running fsstress, we find fsstress
process is keeping running state.
kworker/u32:3-262 [004] ...1 140.787471: ext4_mb_discard_preallocations: dev 8,32 needed 114
....
kworker/u32:3-262 [004] ...1 140.787471: ext4_mb_discard_preallocations: dev 8,32 needed 114
ext4_mb_new_blocks
repeat:
ext4_mb_discard_preallocations_should_retry(sb, ac, &seq)
freed = ext4_mb_discard_preallocations
ext4_mb_discard_group_preallocations
this_cpu_inc(discard_pa_seq);
---> freed == 0
seq_retry = ext4_get_discard_pa_seq_sum
for_each_possible_cpu(__cpu)
__seq += per_cpu(discard_pa_seq, __cpu);
if (seq_retry != *seq) {
*seq = seq_retry;
ret = true;
}
As we see seq_retry is sum of discard_pa_seq every cpu, if
ext4_mb_discard_group_preallocations return zero discard_pa_seq in this
cpu maybe increase one, so condition "seq_retry != *seq" have always
been met.
Ritesh Harjani suggest to in ext4_mb_discard_group_preallocations function we
only increase discard_pa_seq when there is some PA to free.
Fixes: 07b5b8e1ac40 ("ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200916113859.1556397-3-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
In the scenario of writing sparse files, the per-inode prealloc list may
be very long, resulting in high overhead for ext4_mb_use_preallocated().
To circumvent this problem, we limit the maximum length of per-inode
prealloc list to 512 and allow users to modify it.
After patching, we observed that the sys ratio of cpu has dropped, and
the system throughput has increased significantly. We created a process
to write the sparse file, and the running time of the process on the
fixed kernel was significantly reduced, as follows:
Running time on unfixed kernel：
[root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat
real 0m2.051s
user 0m0.008s
sys 0m2.026s
Running time on fixed kernel：
[root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat
real 0m0.471s
user 0m0.004s
sys 0m0.395s
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Link: https://lore.kernel.org/r/d7a98178-056b-6db5-6bce-4ead23f4a257@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Reorganize the if statement of ext4_mb_release_context(), make it
easier to read.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Link: https://lore.kernel.org/r/5439ac6f-db79-ad68-76c1-a4dda9aa0cc3@gmail.com
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Lost chunks are when some other process raced with the current thread
to grab a particular block allocation. Add mb_debug log for
developers who wants to see how often this is happening for a
particular workload.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Link: https://lore.kernel.org/r/0a165ac0-1912-aebd-8a0d-b42e7cd1aea1@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
seq_puts is a lot cheaper than seq_printf, so use that to print
literal strings.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200810022158.9167-1-vulab@iscas.ac.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
It might be better to adjust the code in two places:
1. Determine whether grp is currupt or not should be placed first.
2. (cr<=2 && free <ac->ac_g_ex.fe_len)should may belong to the crx
strategy, and it may be more appropriate to put it in the
subsequent switch statement block. For cr1, cr2, the conditions
in switch potentially realize the above judgment. For cr0, we
should add (free <ac->ac_g_ex.fe_len) judgment, and then delete
(free / fragments) >= ac->ac_g_ex.fe_len), because cr0 returns
true by default.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/e20b2d8f-1154-adb7-3831-a9e11ba842e9@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
These comments do not seem to be related to ext4_mb_check_limits(),
it may be invalid.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/c49faf0c-d5d5-9c51-6911-9e0ff57c6bfa@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fix typos in ext4_mb_regular_allocator() comment
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/d6514145-73b3-808b-ec5a-a8be27c51f9c@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Currently, system zones just track ranges of block, that are "important"
fs metadata (bitmaps, group descriptors, journal blocks, etc.). This
however complicates how extent tree (or indirect blocks) can be checked
for inodes that actually track such metadata - currently the journal
inode but arguably we should be treating quota files or resize inode
similarly. We cannot run __ext4_ext_check() on such metadata inodes when
loading their extents as that would immediately trigger the validity
checks and so we just hack around that and special-case the journal
inode. This however leads to a situation that a journal inode which has
extent tree of depth at least one can have invalid extent tree that gets
unnoticed until ext4_cache_extents() crashes.
To overcome this limitation, track inode number each system zone belongs
to (0 is used for zones not belonging to any inode). We can then verify
inode number matches the expected one when verifying extent tree and
thus avoid the false errors. With this there's no need to to
special-case journal inode during extent tree checking anymore so remove
it.
Fixes: 0a944e8a6c66 ("ext4: don't perform block validity checks on the journal inode")
Reported-by: Wolfgang Frisch <wolfgang.frisch@suse.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200728130437.7804-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Delete the invalid BUGON in ext4_mb_load_buddy_gfp(), the previous
code has already judged whether page is NULL.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/ad68e8a2-5ec3-5beb-537f-f3e53f55367a@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
For file systems where we can afford to keep the buddy bitmaps cached,
we can speed up initial writes to large file systems by starting to
load the block allocation bitmaps as soon as the file system is
mounted. This won't work well for _super_ large file systems, or
memory constrained systems, so we only enable this when it is
requested via a mount option.
Addresses-Google-Bug: 159488342
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
|
|
cr=0 is supposed to be an optimization to save CPU cycles, but if
buddy data (in memory) is not initialized then all this makes no sense
as we have to do sync IO taking a lot of cycles. Also, at cr=0
mballoc doesn't choose any available chunk. cr=1 also skips groups
using heuristic based on avg. fragment size. It's more useful to skip
such groups and switch to cr=2 where groups will be scanned for
available chunks. However, we always read the first block group in a
flex_bg so metadata blocks will get read into the first flex_bg if
possible.
Using sparse image and dm-slow virtual device of 120TB was
simulated, then the image was formatted and filled using debugfs to
mark ~85% of available space as busy. mount process w/o the patch
couldn't complete in half an hour (according to vmstat it would take
~10-11 hours). With the patch applied mount took ~20 seconds.
Lustre-bug-id: https://jira.whamcloud.com/browse/LU-12988
Signed-off-by: Alex Zhuravlev <azhuravlev@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Artem Blagodarenko <artem.blagodarenko@gmail.com>
|
|
This should significantly improve bitmap loading, especially for flex
groups as it tries to load all bitmaps within a flex.group instead of
one by one synchronously.
Prefetching is done in 8 * flex_bg groups, so it should be 8
read-ahead reads for a single allocating thread. At the end of
allocation the thread waits for read-ahead completion and initializes
buddy information so that read-aheads are not lost in case of memory
pressure.
At cr=0 the number of prefetching IOs is limited per allocation
context to prevent a situation when mballoc loads thousands of bitmaps
looking for a perfect group and ignoring groups with good chunks.
Together with the patch "ext4: limit scanning of uninitialized groups"
the mount time (which includes few tiny allocations) of a 1PB
filesystem is reduced significantly:
0% full 50%-full unpatched patched
mount time 33s 9279s 563s
[ Restructured by tytso; removed the state flags in the allocation
context, so it can be used to lazily prefetch the allocation bitmaps
immediately after the file system is mounted. Skip prefetching
block groups which are uninitialized. Finally pass in the
REQ_RAHEAD flag to the block layer while prefetching. ]
Signed-off-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fix spelling typos in ext4_mb_initialize_context.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/883b523c-58ec-7f38-0bb8-cd2ea4393684@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Simplify reading a seq variable by directly using this_cpu_read API
instead of doing this_cpu_ptr and then dereferencing it.
This also avoid the below kernel BUG: which happens when
CONFIG_DEBUG_PREEMPT is enabled
BUG: using smp_processor_id() in preemptible [00000000] code: syz-fuzzer/6927
caller is ext4_mb_new_blocks+0xa4d/0x3b70 fs/ext4/mballoc.c:4711
CPU: 1 PID: 6927 Comm: syz-fuzzer Not tainted 5.7.0-next-20200602-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x18f/0x20d lib/dump_stack.c:118
check_preemption_disabled+0x20d/0x220 lib/smp_processor_id.c:48
ext4_mb_new_blocks+0xa4d/0x3b70 fs/ext4/mballoc.c:4711
ext4_ext_map_blocks+0x201b/0x33e0 fs/ext4/extents.c:4244
ext4_map_blocks+0x4cb/0x1640 fs/ext4/inode.c:626
ext4_getblk+0xad/0x520 fs/ext4/inode.c:833
ext4_bread+0x7c/0x380 fs/ext4/inode.c:883
ext4_append+0x153/0x360 fs/ext4/namei.c:67
ext4_init_new_dir fs/ext4/namei.c:2757 [inline]
ext4_mkdir+0x5e0/0xdf0 fs/ext4/namei.c:2802
vfs_mkdir+0x419/0x690 fs/namei.c:3632
do_mkdirat+0x21e/0x280 fs/namei.c:3655
do_syscall_64+0x60/0xe0 arch/x86/entry/common.c:359
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 42f56b7a4a7d ("ext4: mballoc: introduce pcpu seqcnt for freeing PA
to improve ENOSPC handling")
Suggested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reported-by: syzbot+82f324bb69744c5f6969@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/534f275016296996f54ecf65168bb3392b6f653d.1591699601.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Currently while doing block allocation grp->bb_free may be getting
modified if discard is happening in parallel.
For e.g. consider a case where there are lot of threads who have
preallocated lot of blocks and there is a thread which is trying
to discard all of this group's PA. Now it could happen that
we see all of those group's bb_free is zero and fail the allocation
while there is sufficient space if we free up all the PA.
So this patch adds another flag "EXT4_MB_STRICT_CHECK" which will be set
if we are unable to allocate any blocks in the first try (since we may
not have considered blocks about to be discarded from PA lists).
So during retry attempt to allocate blocks we will use ext4_lock_group()
for checking if the group is good or not.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/9cb740a117c958c36596f167b12af1beae9a68b7.1589955723.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_mb_good_group() definition was changed some time back
and now it even initializes the buddy cache (via ext4_mb_init_group()),
if in case the EXT4_MB_GRP_NEED_INIT() is true for a group.
Note that ext4_mb_init_group() could sleep and so should not be called
under a spinlock held.
This is fine as of now because ext4_mb_good_group() is called before
loading the buddy bitmap without ext4_lock_group() held
and again called after loading the bitmap, only this time with
ext4_lock_group() held.
But still this whole thing is confusing.
So this patch refactors out ext4_mb_good_group_nolock() which should be
called when without holding ext4_lock_group().
Also in further patches we hold the spinlock (ext4_lock_group()) while
doing any calculations which involves grp->bb_free or grp->bb_fragments.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/d9f7d031a5fbe1c943fae6bf1ff5cdf0604ae722.1589955723.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
There could be a race in function ext4_mb_discard_group_preallocations()
where the 1st thread may iterate through group's bb_prealloc_list and
remove all the PAs and add to function's local list head.
Now if the 2nd thread comes in to discard the group preallocations,
it will see that the group->bb_prealloc_list is empty and will return 0.
Consider for a case where we have less number of groups
(for e.g. just group 0),
this may even return an -ENOSPC error from ext4_mb_new_blocks()
(where we call for ext4_mb_discard_group_preallocations()).
But that is wrong, since 2nd thread should have waited for 1st thread
to release all the PAs and should have retried for allocation.
Since 1st thread was anyway going to discard the PAs.
The algorithm using this percpu seq counter goes below:
1. We sample the percpu discard_pa_seq counter before trying for block
allocation in ext4_mb_new_blocks().
2. We increment this percpu discard_pa_seq counter when we either allocate
or free these blocks i.e. while marking those blocks as used/free in
mb_mark_used()/mb_free_blocks().
3. We also increment this percpu seq counter when we successfully identify
that the bb_prealloc_list is not empty and hence proceed for discarding
of those PAs inside ext4_mb_discard_group_preallocations().
Now to make sure that the regular fast path of block allocation is not
affected, as a small optimization we only sample the percpu seq counter
on that cpu. Only when the block allocation fails and when freed blocks
found were 0, that is when we sample percpu seq counter for all cpus using
below function ext4_get_discard_pa_seq_sum(). This happens after making
sure that all the PAs on grp->bb_prealloc_list got freed or if it's empty.
It can be well argued that why don't just check for grp->bb_free to
see if there are any free blocks to be allocated. So here are the two
concerns which were discussed:-
1. If for some reason the blocks available in the group are not
appropriate for allocation logic (say for e.g.
EXT4_MB_HINT_GOAL_ONLY, although this is not yet implemented), then
the retry logic may result into infinte looping since grp->bb_free is
non-zero.
2. Also before preallocation was clubbed with block allocation with the
same ext4_lock_group() held, there were lot of races where grp->bb_free
could not be reliably relied upon.
Due to above, this patch considers discard_pa_seq logic to determine if
we should retry for block allocation. Say if there are are n threads
trying for block allocation and none of those could allocate or discard
any of the blocks, then all of those n threads will fail the block
allocation and return -ENOSPC error. (Since the seq counter for all of
those will match as no block allocation/discard was done during that
duration).
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/7f254686903b87c419d798742fd9a1be34f0657b.1589955723.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Implement ext4_mb_discard_preallocations_should_retry()
which we will need in later patches to add more logic
like check for sequence number match to see if we should
retry for block allocation or not.
There should be no functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/1cfae0098d2aa9afbeb59331401258182868c8f2.1589955723.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_mb_discard_preallocations() only checks for grp->bb_prealloc_list
of every group to discard the group's PA to free up the space if
allocation request fails. Consider below race:-
Process A Process B
1. allocate blocks
1. Fails block allocation from
ext4_mb_regular_allocator()
ext4_lock_group()
allocated blocks
more than ac_o_ex.fe_len
ext4_unlock_group()
2. Scans the
grp->bb_prealloc_list (under
ext4_lock_group()) and
find nothing and thus return
-ENOSPC.
2. Add the additional blocks to PA list
ext4_lock_group()
add blocks to grp->bb_prealloc_list
ext4_unlock_group()
Above race could be avoided if we add those additional blocks to
grp->bb_prealloc_list at the same time with block allocation when
ext4_lock_group() was still held.
With this discard-PA will know if there are actually any blocks which
could be freed from the PA
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/a2217dd782585b42328981832e6d396abaaccb80.1589955723.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
mb_debug() msg had only 1 control level for all type of msgs.
And if we enable mballoc_debug then all of those msgs would be enabled.
Instead of adding multiple debug levels for mb_debug() msgs, use
pr_debug() with which we could have finer control to print msgs at all
of different levels (i.e. at file, func, line no.).
Also add process name/pid, superblk id, and other info in mb_debug()
msg. This also kills the mballoc_debug module parameter, since it is
not needed any more.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/f0c660cbde9e2edbe95c67942ca9ad80dd2231eb.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Make sure to check for e4b->bd_info->bb_bitmap == NULL, in
mb_cmp_bitmaps() and return if NULL, to avoid possible NULL ptr
dereference. Similar to how we do this in other ifdef DOUBLE_CHECK
functions.
Also remove the BUG_ON() logic if kmalloc() or ext4_read_block_bitmap()
fails. We should simply mark grp->bb_bitmap as NULL if above happens.
In fact ext4_read_block_bitmap() may even return an error in case of resize
ioctl. Hence remove this BUG_ON logic (fstests ext4/032 may trigger
this).
Link: https://lore.kernel.org/r/9a54f8a696ff17c057cd571be3d15ac3ec1407f1.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch implemets mb_group_bb_bitmap_alloc() and
mb_group_bb_bitmap_free() function to remove #ifdef DOUBLE_CHECK macro
and it's related code from inside
ext4_mb_add_groupinfo()/ext4_mb_release().
There should be no functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/8c2095d74b779f0254a19b24982490dc6f07c4f9.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Change return type of function ext4_mb_use_preallocated() to bool to
better reflect what this function can return.
There should be no functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/7880cb6ef911465beafefcd7e9c3ea214688744b.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch simplifies error handling logic in ext4_init_mballoc(),
by adding all the cleanups at one place at the end of that function.
There should be no functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/8621a7bc68f7107a9ac4292afeb784515333bd25.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fix few other format specifiers in mb_debug() msgs.
As such no other functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/574fa7f833abf2dbf3b53a2fea3195e71f6cdbd8.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
pa->pa_len is an integer. Fix all of the format specifier used in
mb_debug() for pa_len to %d instead of %u.
As such no functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/af4987f643c586f62bcc9961e43f0a67151d5551.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch adds some more debugging mb_debug() msgs to help improve
mballoc code debugging.
Other than adding more mb_debug() msgs at few more places,
there should be no other functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/5fc8e7788b924e211fcfa4a4c1d2f8503511661a.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This factors out ext4_mb_show_pa() function to show all the group's
preallocation info. This could be useful info to be added in later
patches.
There should be no functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/8f07d890b0038dcc935e9c10e6043ec9f3792721.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Improve the debugging msg by also printing even if bb_free is 0.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/c894f1d1d30f86ae38f4e3a861949665b6dc61cd.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
If the in-core buddy bitmap gets corrupted (or out of sync with the
block bitmap), issue a WARN_ON and try to recover. In most cases this
involves skipping trying to allocate out of a particular block group.
We can end up declaring the file system corrupted, which is fair,
since the file system probably should be checked before we proceed any
further.
Link: https://lore.kernel.org/r/20200414035649.293164-1-tytso@mit.edu
Google-Bug-Id: 34811296
Google-Bug-Id: 34639169
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Using a separate function, ext4_set_errno() to set the errno is
problematic because it doesn't do the right thing once
s_last_error_errorcode is non-zero. It's also less racy to set all of
the error information all at once. (Also, as a bonus, it shrinks code
size slightly.)
Link: https://lore.kernel.org/r/20200329020404.686965-1-tytso@mit.edu
Fixes: 878520ac45f9 ("ext4: save the error code which triggered...")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
