| Age | Commit message (Collapse) | Author |
|---|
|
commit da2dccd7451de62b175fb8f0808d644959e964c7 upstream.
At btrfs_write_check() if our file's i_size is not sector size aligned and
we have a write that starts at an offset larger than the i_size that falls
within the same page of the i_size, then we end up not zeroing the file
range [i_size, write_offset).
The code is this:
start_pos = round_down(pos, fs_info->sectorsize);
oldsize = i_size_read(inode);
if (start_pos > oldsize) {
/* Expand hole size to cover write data, preventing empty gap */
loff_t end_pos = round_up(pos + count, fs_info->sectorsize);
ret = btrfs_cont_expand(BTRFS_I(inode), oldsize, end_pos);
if (ret)
return ret;
}
So if our file's i_size is 90269 bytes and a write at offset 90365 bytes
comes in, we get 'start_pos' set to 90112 bytes, which is less than the
i_size and therefore we don't zero out the range [90269, 90365) by
calling btrfs_cont_expand().
This is an old bug introduced in commit 9036c10208e1 ("Btrfs: update hole
handling v2"), from 2008, and the buggy code got moved around over the
years.
Fix this by discarding 'start_pos' and comparing against the write offset
('pos') without any alignment.
This bug was recently exposed by test case generic/363 which tests this
scenario by polluting ranges beyond EOF with an mmap write and than verify
that after a file increases we get zeroes for the range which is supposed
to be a hole and not what we wrote with the previous mmaped write.
We're only seeing this exposed now because generic/363 used to run only
on xfs until last Sunday's fstests update.
The test was failing like this:
$ ./check generic/363
FSTYP -- btrfs
PLATFORM -- Linux/x86_64 debian0 6.13.0-rc7-btrfs-next-185+ #17 SMP PREEMPT_DYNAMIC Mon Feb 3 12:28:46 WET 2025
MKFS_OPTIONS -- /dev/sdc
MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1
generic/363 0s ... [failed, exit status 1]- output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad)
# --- tests/generic/363.out 2025-02-05 15:31:14.013646509 +0000
# +++ /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad 2025-02-05 17:25:33.112630781 +0000
@@ -1 +1,46 @@
QA output created by 363
+READ BAD DATA: offset = 0xdcad, size = 0xd921, fname = /home/fdmanana/btrfs-tests/dev/junk
+OFFSET GOOD BAD RANGE
+0x1609d 0x0000 0x3104 0x0
+operation# (mod 256) for the bad data may be 4
+0x1609e 0x0000 0x0472 0x1
+operation# (mod 256) for the bad data may be 4
...
(Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/generic/363.out /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad' to see the entire diff)
Ran: generic/363
Failures: generic/363
Failed 1 of 1 tests
Fixes: 9036c10208e1 ("Btrfs: update hole handling v2")
CC: stable@vger.kernel.org
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2c8507c63f5498d4ee4af404a8e44ceae4345056 upstream.
This commit re-attempts the backport of the change to the linux-6.6.y
branch. Commit 6e1a82259307 ("btrfs: avoid monopolizing a core when
activating a swap file") on this branch was reverted.
During swap activation we iterate over the extents of a file and we can
have many thousands of them, so we can end up in a busy loop monopolizing
a core. Avoid this by doing a voluntary reschedule after processing each
extent.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 6e1a8225930719a9f352d56320214e33e2dde0a6.
The backport for linux-6.6.y, commit 6e1a82259307 ("btrfs: avoid
monopolizing a core when activating a swap file"), inserted
cond_resched() in the wrong location.
Revert it now; a subsequent commit will re-backport the original patch.
Fixes: 6e1a82259307 ("btrfs: avoid monopolizing a core when activating a swap file") # linux-6.6.y
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6a4730b325aaa48f7a5d5ba97aff0a955e2d9cec ]
This BUG_ON is meant to catch backref cache problems, but these can
arise from either bugs in the backref cache or corruption in the extent
tree. Fix it to be a proper error.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
btrfs_drop_extents()
[ Upstream commit 5324c4e10e9c2ce307a037e904c0d9671d7137d9 ]
A data race occurs when the function `insert_ordered_extent_file_extent()`
and the function `btrfs_inode_safe_disk_i_size_write()` are executed
concurrently. The function `insert_ordered_extent_file_extent()` is not
locked when reading inode->disk_i_size, causing
`btrfs_inode_safe_disk_i_size_write()` to cause data competition when
writing inode->disk_i_size, thus affecting the value of `modify_tree`.
The specific call stack that appears during testing is as follows:
============DATA_RACE============
btrfs_drop_extents+0x89a/0xa060 [btrfs]
insert_reserved_file_extent+0xb54/0x2960 [btrfs]
insert_ordered_extent_file_extent+0xff5/0x1760 [btrfs]
btrfs_finish_one_ordered+0x1b85/0x36a0 [btrfs]
btrfs_finish_ordered_io+0x37/0x60 [btrfs]
finish_ordered_fn+0x3e/0x50 [btrfs]
btrfs_work_helper+0x9c9/0x27a0 [btrfs]
process_scheduled_works+0x716/0xf10
worker_thread+0xb6a/0x1190
kthread+0x292/0x330
ret_from_fork+0x4d/0x80
ret_from_fork_asm+0x1a/0x30
============OTHER_INFO============
btrfs_inode_safe_disk_i_size_write+0x4ec/0x600 [btrfs]
btrfs_finish_one_ordered+0x24c7/0x36a0 [btrfs]
btrfs_finish_ordered_io+0x37/0x60 [btrfs]
finish_ordered_fn+0x3e/0x50 [btrfs]
btrfs_work_helper+0x9c9/0x27a0 [btrfs]
process_scheduled_works+0x716/0xf10
worker_thread+0xb6a/0x1190
kthread+0x292/0x330
ret_from_fork+0x4d/0x80
ret_from_fork_asm+0x1a/0x30
=================================
The main purpose of the check of the inode's disk_i_size is to avoid
taking write locks on a btree path when we have a write at or beyond
EOF, since in these cases we don't expect to find extent items in the
root to drop. However if we end up taking write locks due to a data
race on disk_i_size, everything is still correct, we only add extra
lock contention on the tree in case there's concurrency from other tasks.
If the race causes us to not take write locks when we actually need them,
then everything is functionally correct as well, since if we find out we
have extent items to drop and we took read locks (modify_tree set to 0),
we release the path and retry again with write locks.
Since this data race does not affect the correctness of the function,
it is a harmless data race, use data_race() to check inode->disk_i_size.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Hao-ran Zheng <zhenghaoran154@gmail.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e2f0943cf37305dbdeaf9846e3c941451bcdef63 ]
When we are trying to join the current transaction and if it's aborted,
we read its 'aborted' field after unlocking fs_info->trans_lock and
without holding any extra reference count on it. This means that a
concurrent task that is aborting the transaction may free the transaction
before we read its 'aborted' field, leading to a use-after-free.
Fix this by reading the 'aborted' field while holding fs_info->trans_lock
since any freeing task must first acquire that lock and set
fs_info->running_transaction to NULL before freeing the transaction.
This was reported by syzbot and Dmitry with the following stack traces
from KASAN:
==================================================================
BUG: KASAN: slab-use-after-free in join_transaction+0xd9b/0xda0 fs/btrfs/transaction.c:278
Read of size 4 at addr ffff888011839024 by task kworker/u4:9/1128
CPU: 0 UID: 0 PID: 1128 Comm: kworker/u4:9 Not tainted 6.13.0-rc7-syzkaller-00019-gc45323b7560e #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Workqueue: events_unbound btrfs_async_reclaim_data_space
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x169/0x550 mm/kasan/report.c:489
kasan_report+0x143/0x180 mm/kasan/report.c:602
join_transaction+0xd9b/0xda0 fs/btrfs/transaction.c:278
start_transaction+0xaf8/0x1670 fs/btrfs/transaction.c:697
flush_space+0x448/0xcf0 fs/btrfs/space-info.c:803
btrfs_async_reclaim_data_space+0x159/0x510 fs/btrfs/space-info.c:1321
process_one_work kernel/workqueue.c:3236 [inline]
process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3317
worker_thread+0x870/0xd30 kernel/workqueue.c:3398
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Allocated by task 5315:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4329
kmalloc_noprof include/linux/slab.h:901 [inline]
join_transaction+0x144/0xda0 fs/btrfs/transaction.c:308
start_transaction+0xaf8/0x1670 fs/btrfs/transaction.c:697
btrfs_create_common+0x1b2/0x2e0 fs/btrfs/inode.c:6572
lookup_open fs/namei.c:3649 [inline]
open_last_lookups fs/namei.c:3748 [inline]
path_openat+0x1c03/0x3590 fs/namei.c:3984
do_filp_open+0x27f/0x4e0 fs/namei.c:4014
do_sys_openat2+0x13e/0x1d0 fs/open.c:1402
do_sys_open fs/open.c:1417 [inline]
__do_sys_creat fs/open.c:1495 [inline]
__se_sys_creat fs/open.c:1489 [inline]
__x64_sys_creat+0x123/0x170 fs/open.c:1489
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 5336:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x59/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2353 [inline]
slab_free mm/slub.c:4613 [inline]
kfree+0x196/0x430 mm/slub.c:4761
cleanup_transaction fs/btrfs/transaction.c:2063 [inline]
btrfs_commit_transaction+0x2c97/0x3720 fs/btrfs/transaction.c:2598
insert_balance_item+0x1284/0x20b0 fs/btrfs/volumes.c:3757
btrfs_balance+0x992/0x10c0 fs/btrfs/volumes.c:4633
btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3670
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ffff888011839000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 36 bytes inside of
freed 2048-byte region [ffff888011839000, ffff888011839800)
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11838
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0xfff00000000040(head|node=0|zone=1|lastcpupid=0x7ff)
page_type: f5(slab)
raw: 00fff00000000040 ffff88801ac42000 ffffea0000493400 dead000000000002
raw: 0000000000000000 0000000000080008 00000001f5000000 0000000000000000
head: 00fff00000000040 ffff88801ac42000 ffffea0000493400 dead000000000002
head: 0000000000000000 0000000000080008 00000001f5000000 0000000000000000
head: 00fff00000000003 ffffea0000460e01 ffffffffffffffff 0000000000000000
head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 57, tgid 57 (kworker/0:2), ts 67248182943, free_ts 67229742023
set_page_owner include/linux/page_owner.h:32 [inline]
post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1558
prep_new_page mm/page_alloc.c:1566 [inline]
get_page_from_freelist+0x365c/0x37a0 mm/page_alloc.c:3476
__alloc_pages_noprof+0x292/0x710 mm/page_alloc.c:4753
alloc_pages_mpol_noprof+0x3e1/0x780 mm/mempolicy.c:2269
alloc_slab_page+0x6a/0x110 mm/slub.c:2423
allocate_slab+0x5a/0x2b0 mm/slub.c:2589
new_slab mm/slub.c:2642 [inline]
___slab_alloc+0xc27/0x14a0 mm/slub.c:3830
__slab_alloc+0x58/0xa0 mm/slub.c:3920
__slab_alloc_node mm/slub.c:3995 [inline]
slab_alloc_node mm/slub.c:4156 [inline]
__do_kmalloc_node mm/slub.c:4297 [inline]
__kmalloc_node_track_caller_noprof+0x2e9/0x4c0 mm/slub.c:4317
kmalloc_reserve+0x111/0x2a0 net/core/skbuff.c:609
__alloc_skb+0x1f3/0x440 net/core/skbuff.c:678
alloc_skb include/linux/skbuff.h:1323 [inline]
alloc_skb_with_frags+0xc3/0x820 net/core/skbuff.c:6612
sock_alloc_send_pskb+0x91a/0xa60 net/core/sock.c:2884
sock_alloc_send_skb include/net/sock.h:1803 [inline]
mld_newpack+0x1c3/0xaf0 net/ipv6/mcast.c:1747
add_grhead net/ipv6/mcast.c:1850 [inline]
add_grec+0x1492/0x19a0 net/ipv6/mcast.c:1988
mld_send_cr net/ipv6/mcast.c:2114 [inline]
mld_ifc_work+0x691/0xd90 net/ipv6/mcast.c:2651
page last free pid 5300 tgid 5300 stack trace:
reset_page_owner include/linux/page_owner.h:25 [inline]
free_pages_prepare mm/page_alloc.c:1127 [inline]
free_unref_page+0xd3f/0x1010 mm/page_alloc.c:2659
__slab_free+0x2c2/0x380 mm/slub.c:4524
qlink_free mm/kasan/quarantine.c:163 [inline]
qlist_free_all+0x9a/0x140 mm/kasan/quarantine.c:179
kasan_quarantine_reduce+0x14f/0x170 mm/kasan/quarantine.c:286
__kasan_slab_alloc+0x23/0x80 mm/kasan/common.c:329
kasan_slab_alloc include/linux/kasan.h:250 [inline]
slab_post_alloc_hook mm/slub.c:4119 [inline]
slab_alloc_node mm/slub.c:4168 [inline]
__do_kmalloc_node mm/slub.c:4297 [inline]
__kmalloc_noprof+0x236/0x4c0 mm/slub.c:4310
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1037 [inline]
fib_create_info+0xc14/0x25b0 net/ipv4/fib_semantics.c:1435
fib_table_insert+0x1f6/0x1f20 net/ipv4/fib_trie.c:1231
fib_magic+0x3d8/0x620 net/ipv4/fib_frontend.c:1112
fib_add_ifaddr+0x40c/0x5e0 net/ipv4/fib_frontend.c:1156
fib_netdev_event+0x375/0x490 net/ipv4/fib_frontend.c:1494
notifier_call_chain+0x1a5/0x3f0 kernel/notifier.c:85
__dev_notify_flags+0x207/0x400
dev_change_flags+0xf0/0x1a0 net/core/dev.c:9045
do_setlink+0xc90/0x4210 net/core/rtnetlink.c:3109
rtnl_changelink net/core/rtnetlink.c:3723 [inline]
__rtnl_newlink net/core/rtnetlink.c:3875 [inline]
rtnl_newlink+0x1bb6/0x2210 net/core/rtnetlink.c:4012
Memory state around the buggy address:
ffff888011838f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888011838f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888011839000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888011839080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888011839100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Reported-by: syzbot+45212e9d87a98c3f5b42@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/678e7da5.050a0220.303755.007c.GAE@google.com/
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/linux-btrfs/CACT4Y+ZFBdo7pT8L2AzM=vegZwjp-wNkVJZQf0Ta3vZqtExaSw@mail.gmail.com/
Fixes: 871383be592b ("btrfs: add missing unlocks to transaction abort paths")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
abort
[ Upstream commit 0d85f5c2dd91df6b5da454406756f463ba923b69 ]
If while we are doing a direct IO write a transaction abort happens, we
mark all existing ordered extents with the BTRFS_ORDERED_IOERR flag (done
at btrfs_destroy_ordered_extents()), and then after that if we enter
btrfs_split_ordered_extent() and the ordered extent has bytes left
(meaning we have a bio that doesn't cover the whole ordered extent, see
details at btrfs_extract_ordered_extent()), we will fail on the following
assertion at btrfs_split_ordered_extent():
ASSERT(!(flags & ~BTRFS_ORDERED_TYPE_FLAGS));
because the BTRFS_ORDERED_IOERR flag is set and the definition of
BTRFS_ORDERED_TYPE_FLAGS is just the union of all flags that identify the
type of write (regular, nocow, prealloc, compressed, direct IO, encoded).
Fix this by returning an error from btrfs_extract_ordered_extent() if we
find the BTRFS_ORDERED_IOERR flag in the ordered extent. The error will
be the error that resulted in the transaction abort or -EIO if no
transaction abort happened.
This was recently reported by syzbot with the following trace:
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 1
CPU: 0 UID: 0 PID: 5321 Comm: syz.0.0 Not tainted 6.13.0-rc5-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
fail_dump lib/fault-inject.c:53 [inline]
should_fail_ex+0x3b0/0x4e0 lib/fault-inject.c:154
should_failslab+0xac/0x100 mm/failslab.c:46
slab_pre_alloc_hook mm/slub.c:4072 [inline]
slab_alloc_node mm/slub.c:4148 [inline]
__do_kmalloc_node mm/slub.c:4297 [inline]
__kmalloc_noprof+0xdd/0x4c0 mm/slub.c:4310
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1037 [inline]
btrfs_chunk_alloc_add_chunk_item+0x244/0x1100 fs/btrfs/volumes.c:5742
reserve_chunk_space+0x1ca/0x2c0 fs/btrfs/block-group.c:4292
check_system_chunk fs/btrfs/block-group.c:4319 [inline]
do_chunk_alloc fs/btrfs/block-group.c:3891 [inline]
btrfs_chunk_alloc+0x77b/0xf80 fs/btrfs/block-group.c:4187
find_free_extent_update_loop fs/btrfs/extent-tree.c:4166 [inline]
find_free_extent+0x42d1/0x5810 fs/btrfs/extent-tree.c:4579
btrfs_reserve_extent+0x422/0x810 fs/btrfs/extent-tree.c:4672
btrfs_new_extent_direct fs/btrfs/direct-io.c:186 [inline]
btrfs_get_blocks_direct_write+0x706/0xfa0 fs/btrfs/direct-io.c:321
btrfs_dio_iomap_begin+0xbb7/0x1180 fs/btrfs/direct-io.c:525
iomap_iter+0x697/0xf60 fs/iomap/iter.c:90
__iomap_dio_rw+0xeb9/0x25b0 fs/iomap/direct-io.c:702
btrfs_dio_write fs/btrfs/direct-io.c:775 [inline]
btrfs_direct_write+0x610/0xa30 fs/btrfs/direct-io.c:880
btrfs_do_write_iter+0x2a0/0x760 fs/btrfs/file.c:1397
do_iter_readv_writev+0x600/0x880
vfs_writev+0x376/0xba0 fs/read_write.c:1050
do_pwritev fs/read_write.c:1146 [inline]
__do_sys_pwritev2 fs/read_write.c:1204 [inline]
__se_sys_pwritev2+0x196/0x2b0 fs/read_write.c:1195
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f1281f85d29
RSP: 002b:00007f12819fe038 EFLAGS: 00000246 ORIG_RAX: 0000000000000148
RAX: ffffffffffffffda RBX: 00007f1282176080 RCX: 00007f1281f85d29
RDX: 0000000000000001 RSI: 0000000020000240 RDI: 0000000000000005
RBP: 00007f12819fe090 R08: 0000000000000000 R09: 0000000000000003
R10: 0000000000007000 R11: 0000000000000246 R12: 0000000000000002
R13: 0000000000000000 R14: 00007f1282176080 R15: 00007ffcb9e23328
</TASK>
BTRFS error (device loop0 state A): Transaction aborted (error -12)
BTRFS: error (device loop0 state A) in btrfs_chunk_alloc_add_chunk_item:5745: errno=-12 Out of memory
BTRFS info (device loop0 state EA): forced readonly
assertion failed: !(flags & ~BTRFS_ORDERED_TYPE_FLAGS), in fs/btrfs/ordered-data.c:1234
------------[ cut here ]------------
kernel BUG at fs/btrfs/ordered-data.c:1234!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5321 Comm: syz.0.0 Not tainted 6.13.0-rc5-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:btrfs_split_ordered_extent+0xd8d/0xe20 fs/btrfs/ordered-data.c:1234
RSP: 0018:ffffc9000d1df2b8 EFLAGS: 00010246
RAX: 0000000000000057 RBX: 000000000006a000 RCX: 9ce21886c4195300
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: 0000000000000091 R08: ffffffff817f0a3c R09: 1ffff92001a3bdf4
R10: dffffc0000000000 R11: fffff52001a3bdf5 R12: 1ffff1100a45f401
R13: ffff8880522fa018 R14: dffffc0000000000 R15: 000000000006a000
FS: 00007f12819fe6c0(0000) GS:ffff88801fc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000557750bd7da8 CR3: 00000000400ea000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
btrfs_extract_ordered_extent fs/btrfs/direct-io.c:702 [inline]
btrfs_dio_submit_io+0x4be/0x6d0 fs/btrfs/direct-io.c:737
iomap_dio_submit_bio fs/iomap/direct-io.c:85 [inline]
iomap_dio_bio_iter+0x1022/0x1740 fs/iomap/direct-io.c:447
__iomap_dio_rw+0x13b7/0x25b0 fs/iomap/direct-io.c:703
btrfs_dio_write fs/btrfs/direct-io.c:775 [inline]
btrfs_direct_write+0x610/0xa30 fs/btrfs/direct-io.c:880
btrfs_do_write_iter+0x2a0/0x760 fs/btrfs/file.c:1397
do_iter_readv_writev+0x600/0x880
vfs_writev+0x376/0xba0 fs/read_write.c:1050
do_pwritev fs/read_write.c:1146 [inline]
__do_sys_pwritev2 fs/read_write.c:1204 [inline]
__se_sys_pwritev2+0x196/0x2b0 fs/read_write.c:1195
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f1281f85d29
RSP: 002b:00007f12819fe038 EFLAGS: 00000246 ORIG_RAX: 0000000000000148
RAX: ffffffffffffffda RBX: 00007f1282176080 RCX: 00007f1281f85d29
RDX: 0000000000000001 RSI: 0000000020000240 RDI: 0000000000000005
RBP: 00007f12819fe090 R08: 0000000000000000 R09: 0000000000000003
R10: 0000000000007000 R11: 0000000000000246 R12: 0000000000000002
R13: 0000000000000000 R14: 00007f1282176080 R15: 00007ffcb9e23328
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:btrfs_split_ordered_extent+0xd8d/0xe20 fs/btrfs/ordered-data.c:1234
RSP: 0018:ffffc9000d1df2b8 EFLAGS: 00010246
RAX: 0000000000000057 RBX: 000000000006a000 RCX: 9ce21886c4195300
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: 0000000000000091 R08: ffffffff817f0a3c R09: 1ffff92001a3bdf4
R10: dffffc0000000000 R11: fffff52001a3bdf5 R12: 1ffff1100a45f401
R13: ffff8880522fa018 R14: dffffc0000000000 R15: 000000000006a000
FS: 00007f12819fe6c0(0000) GS:ffff88801fc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000557750bd7da8 CR3: 00000000400ea000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
In this case the transaction abort was due to (an injected) memory
allocation failure when attempting to allocate a new chunk.
Reported-by: syzbot+f60d8337a5c8e8d92a77@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/6777f2dd.050a0220.178762.0045.GAE@google.com/
Fixes: 52b1fdca23ac ("btrfs: handle completed ordered extents in btrfs_split_ordered_extent")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d0f038104fa37380e2a725e669508e43d0c503e9 upstream.
There is a recent ML report that mounting a large fs backed by hardware
RAID56 controller (with one device missing) took too much time, and
systemd seems to kill the mount attempt.
In that case, the only error message is:
BTRFS error (device sdj): open_ctree failed
There is no reason on why the failure happened, making it very hard to
understand the reason.
At least output the error number (in the particular case it should be
-EINTR) to provide some clue.
Link: https://lore.kernel.org/linux-btrfs/9b9c4d2810abcca2f9f76e32220ed9a90febb235.camel@scientia.org/
Reported-by: Christoph Anton Mitterer <calestyo@scientia.org>
Cc: stable@vger.kernel.org
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6aecd91a5c5b68939cf4169e32bc49f3cd2dd329 ]
[BUG]
Syzbot reported a crash with the following call trace:
BTRFS info (device loop0): scrub: started on devid 1
BUG: kernel NULL pointer dereference, address: 0000000000000208
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 106e70067 P4D 106e70067 PUD 107143067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 UID: 0 PID: 689 Comm: repro Kdump: loaded Tainted: G O 6.13.0-rc4-custom+ #206
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:find_first_extent_item+0x26/0x1f0 [btrfs]
Call Trace:
<TASK>
scrub_find_fill_first_stripe+0x13d/0x3b0 [btrfs]
scrub_simple_mirror+0x175/0x260 [btrfs]
scrub_stripe+0x5d4/0x6c0 [btrfs]
scrub_chunk+0xbb/0x170 [btrfs]
scrub_enumerate_chunks+0x2f4/0x5f0 [btrfs]
btrfs_scrub_dev+0x240/0x600 [btrfs]
btrfs_ioctl+0x1dc8/0x2fa0 [btrfs]
? do_sys_openat2+0xa5/0xf0
__x64_sys_ioctl+0x97/0xc0
do_syscall_64+0x4f/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
[CAUSE]
The reproducer is using a corrupted image where extent tree root is
corrupted, thus forcing to use "rescue=all,ro" mount option to mount the
image.
Then it triggered a scrub, but since scrub relies on extent tree to find
where the data/metadata extents are, scrub_find_fill_first_stripe()
relies on an non-empty extent root.
But unfortunately scrub_find_fill_first_stripe() doesn't really expect
an NULL pointer for extent root, it use extent_root to grab fs_info and
triggered a NULL pointer dereference.
[FIX]
Add an extra check for a valid extent root at the beginning of
scrub_find_fill_first_stripe().
The new error path is introduced by 42437a6386ff ("btrfs: introduce
mount option rescue=ignorebadroots"), but that's pretty old, and later
commit b979547513ff ("btrfs: scrub: introduce helper to find and fill
sector info for a scrub_stripe") changed how we do scrub.
So for kernels older than 6.6, the fix will need manual backport.
Reported-by: syzbot+339e9dbe3a2ca419b85d@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/67756935.050a0220.25abdd.0a12.GAE@google.com/
Fixes: 42437a6386ff ("btrfs: introduce mount option rescue=ignorebadroots")
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
unmount
[ Upstream commit f10bef73fb355e3fc85e63a50386798be68ff486 ]
During the unmount path, at close_ctree(), we first stop the cleaner
kthread, using kthread_stop() which frees the associated task_struct, and
then stop and destroy all the work queues. However after we stopped the
cleaner we may still have a worker from the delalloc_workers queue running
inode.c:submit_compressed_extents(), which calls btrfs_add_delayed_iput(),
which in turn tries to wake up the cleaner kthread - which was already
destroyed before, resulting in a use-after-free on the task_struct.
Syzbot reported this with the following stack traces:
BUG: KASAN: slab-use-after-free in __lock_acquire+0x78/0x2100 kernel/locking/lockdep.c:5089
Read of size 8 at addr ffff8880259d2818 by task kworker/u8:3/52
CPU: 1 UID: 0 PID: 52 Comm: kworker/u8:3 Not tainted 6.13.0-rc1-syzkaller-00002-gcdd30ebb1b9f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: btrfs-delalloc btrfs_work_helper
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x169/0x550 mm/kasan/report.c:489
kasan_report+0x143/0x180 mm/kasan/report.c:602
__lock_acquire+0x78/0x2100 kernel/locking/lockdep.c:5089
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162
class_raw_spinlock_irqsave_constructor include/linux/spinlock.h:551 [inline]
try_to_wake_up+0xc2/0x1470 kernel/sched/core.c:4205
submit_compressed_extents+0xdf/0x16e0 fs/btrfs/inode.c:1615
run_ordered_work fs/btrfs/async-thread.c:288 [inline]
btrfs_work_helper+0x96f/0xc40 fs/btrfs/async-thread.c:324
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Allocated by task 2:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
unpoison_slab_object mm/kasan/common.c:319 [inline]
__kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:345
kasan_slab_alloc include/linux/kasan.h:250 [inline]
slab_post_alloc_hook mm/slub.c:4104 [inline]
slab_alloc_node mm/slub.c:4153 [inline]
kmem_cache_alloc_node_noprof+0x1d9/0x380 mm/slub.c:4205
alloc_task_struct_node kernel/fork.c:180 [inline]
dup_task_struct+0x57/0x8c0 kernel/fork.c:1113
copy_process+0x5d1/0x3d50 kernel/fork.c:2225
kernel_clone+0x223/0x870 kernel/fork.c:2807
kernel_thread+0x1bc/0x240 kernel/fork.c:2869
create_kthread kernel/kthread.c:412 [inline]
kthreadd+0x60d/0x810 kernel/kthread.c:767
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Freed by task 24:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x59/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2338 [inline]
slab_free mm/slub.c:4598 [inline]
kmem_cache_free+0x195/0x410 mm/slub.c:4700
put_task_struct include/linux/sched/task.h:144 [inline]
delayed_put_task_struct+0x125/0x300 kernel/exit.c:227
rcu_do_batch kernel/rcu/tree.c:2567 [inline]
rcu_core+0xaaa/0x17a0 kernel/rcu/tree.c:2823
handle_softirqs+0x2d4/0x9b0 kernel/softirq.c:554
run_ksoftirqd+0xca/0x130 kernel/softirq.c:943
smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Last potentially related work creation:
kasan_save_stack+0x3f/0x60 mm/kasan/common.c:47
__kasan_record_aux_stack+0xac/0xc0 mm/kasan/generic.c:544
__call_rcu_common kernel/rcu/tree.c:3086 [inline]
call_rcu+0x167/0xa70 kernel/rcu/tree.c:3190
context_switch kernel/sched/core.c:5372 [inline]
__schedule+0x1803/0x4be0 kernel/sched/core.c:6756
__schedule_loop kernel/sched/core.c:6833 [inline]
schedule+0x14b/0x320 kernel/sched/core.c:6848
schedule_timeout+0xb0/0x290 kernel/time/sleep_timeout.c:75
do_wait_for_common kernel/sched/completion.c:95 [inline]
__wait_for_common kernel/sched/completion.c:116 [inline]
wait_for_common kernel/sched/completion.c:127 [inline]
wait_for_completion+0x355/0x620 kernel/sched/completion.c:148
kthread_stop+0x19e/0x640 kernel/kthread.c:712
close_ctree+0x524/0xd60 fs/btrfs/disk-io.c:4328
generic_shutdown_super+0x139/0x2d0 fs/super.c:642
kill_anon_super+0x3b/0x70 fs/super.c:1237
btrfs_kill_super+0x41/0x50 fs/btrfs/super.c:2112
deactivate_locked_super+0xc4/0x130 fs/super.c:473
cleanup_mnt+0x41f/0x4b0 fs/namespace.c:1373
task_work_run+0x24f/0x310 kernel/task_work.c:239
ptrace_notify+0x2d2/0x380 kernel/signal.c:2503
ptrace_report_syscall include/linux/ptrace.h:415 [inline]
ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline]
syscall_exit_work+0xc7/0x1d0 kernel/entry/common.c:173
syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline]
syscall_exit_to_user_mode+0x24a/0x340 kernel/entry/common.c:218
do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ffff8880259d1e00
which belongs to the cache task_struct of size 7424
The buggy address is located 2584 bytes inside of
freed 7424-byte region [ffff8880259d1e00, ffff8880259d3b00)
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x259d0
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
memcg:ffff88802f4b56c1
flags: 0xfff00000000040(head|node=0|zone=1|lastcpupid=0x7ff)
page_type: f5(slab)
raw: 00fff00000000040 ffff88801bafe500 dead000000000100 dead000000000122
raw: 0000000000000000 0000000000040004 00000001f5000000 ffff88802f4b56c1
head: 00fff00000000040 ffff88801bafe500 dead000000000100 dead000000000122
head: 0000000000000000 0000000000040004 00000001f5000000 ffff88802f4b56c1
head: 00fff00000000003 ffffea0000967401 ffffffffffffffff 0000000000000000
head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 12, tgid 12 (kworker/u8:1), ts 7328037942, free_ts 0
set_page_owner include/linux/page_owner.h:32 [inline]
post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1556
prep_new_page mm/page_alloc.c:1564 [inline]
get_page_from_freelist+0x3651/0x37a0 mm/page_alloc.c:3474
__alloc_pages_noprof+0x292/0x710 mm/page_alloc.c:4751
alloc_pages_mpol_noprof+0x3e8/0x680 mm/mempolicy.c:2265
alloc_slab_page+0x6a/0x140 mm/slub.c:2408
allocate_slab+0x5a/0x2f0 mm/slub.c:2574
new_slab mm/slub.c:2627 [inline]
___slab_alloc+0xcd1/0x14b0 mm/slub.c:3815
__slab_alloc+0x58/0xa0 mm/slub.c:3905
__slab_alloc_node mm/slub.c:3980 [inline]
slab_alloc_node mm/slub.c:4141 [inline]
kmem_cache_alloc_node_noprof+0x269/0x380 mm/slub.c:4205
alloc_task_struct_node kernel/fork.c:180 [inline]
dup_task_struct+0x57/0x8c0 kernel/fork.c:1113
copy_process+0x5d1/0x3d50 kernel/fork.c:2225
kernel_clone+0x223/0x870 kernel/fork.c:2807
user_mode_thread+0x132/0x1a0 kernel/fork.c:2885
call_usermodehelper_exec_work+0x5c/0x230 kernel/umh.c:171
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
page_owner free stack trace missing
Memory state around the buggy address:
ffff8880259d2700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880259d2780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8880259d2800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8880259d2880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880259d2900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Fix this by flushing the delalloc workers queue before stopping the
cleaner kthread.
Reported-by: syzbot+b7cf50a0c173770dcb14@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/674ed7e8.050a0220.48a03.0031.GAE@google.com/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 05b36b04d74a517d6675bf2f90829ff1ac7e28dc upstream.
Shinichiro reported the following use-after free that sometimes is
happening in our CI system when running fstests' btrfs/284 on a TCMU
runner device:
BUG: KASAN: slab-use-after-free in lock_release+0x708/0x780
Read of size 8 at addr ffff888106a83f18 by task kworker/u80:6/219
CPU: 8 UID: 0 PID: 219 Comm: kworker/u80:6 Not tainted 6.12.0-rc6-kts+ #15
Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020
Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0xa0
? lock_release+0x708/0x780
print_report+0x174/0x505
? lock_release+0x708/0x780
? __virt_addr_valid+0x224/0x410
? lock_release+0x708/0x780
kasan_report+0xda/0x1b0
? lock_release+0x708/0x780
? __wake_up+0x44/0x60
lock_release+0x708/0x780
? __pfx_lock_release+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? lock_is_held_type+0x9a/0x110
_raw_spin_unlock_irqrestore+0x1f/0x60
__wake_up+0x44/0x60
btrfs_encoded_read_endio+0x14b/0x190 [btrfs]
btrfs_check_read_bio+0x8d9/0x1360 [btrfs]
? lock_release+0x1b0/0x780
? trace_lock_acquire+0x12f/0x1a0
? __pfx_btrfs_check_read_bio+0x10/0x10 [btrfs]
? process_one_work+0x7e3/0x1460
? lock_acquire+0x31/0xc0
? process_one_work+0x7e3/0x1460
process_one_work+0x85c/0x1460
? __pfx_process_one_work+0x10/0x10
? assign_work+0x16c/0x240
worker_thread+0x5e6/0xfc0
? __pfx_worker_thread+0x10/0x10
kthread+0x2c3/0x3a0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 3661:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
btrfs_encoded_read_regular_fill_pages+0x16c/0x6d0 [btrfs]
send_extent_data+0xf0f/0x24a0 [btrfs]
process_extent+0x48a/0x1830 [btrfs]
changed_cb+0x178b/0x2ea0 [btrfs]
btrfs_ioctl_send+0x3bf9/0x5c20 [btrfs]
_btrfs_ioctl_send+0x117/0x330 [btrfs]
btrfs_ioctl+0x184a/0x60a0 [btrfs]
__x64_sys_ioctl+0x12e/0x1a0
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 3661:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x70
__kasan_slab_free+0x4f/0x70
kfree+0x143/0x490
btrfs_encoded_read_regular_fill_pages+0x531/0x6d0 [btrfs]
send_extent_data+0xf0f/0x24a0 [btrfs]
process_extent+0x48a/0x1830 [btrfs]
changed_cb+0x178b/0x2ea0 [btrfs]
btrfs_ioctl_send+0x3bf9/0x5c20 [btrfs]
_btrfs_ioctl_send+0x117/0x330 [btrfs]
btrfs_ioctl+0x184a/0x60a0 [btrfs]
__x64_sys_ioctl+0x12e/0x1a0
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The buggy address belongs to the object at ffff888106a83f00
which belongs to the cache kmalloc-rnd-07-96 of size 96
The buggy address is located 24 bytes inside of
freed 96-byte region [ffff888106a83f00, ffff888106a83f60)
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888106a83800 pfn:0x106a83
flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
page_type: f5(slab)
raw: 0017ffffc0000000 ffff888100053680 ffffea0004917200 0000000000000004
raw: ffff888106a83800 0000000080200019 00000001f5000000 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888106a83e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff888106a83e80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
>ffff888106a83f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888106a83f80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff888106a84000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Further analyzing the trace and the crash dump's vmcore file shows that
the wake_up() call in btrfs_encoded_read_endio() is calling wake_up() on
the wait_queue that is in the private data passed to the end_io handler.
Commit 4ff47df40447 ("btrfs: move priv off stack in
btrfs_encoded_read_regular_fill_pages()") moved 'struct
btrfs_encoded_read_private' off the stack.
Before that commit one can see a corruption of the private data when
analyzing the vmcore after a crash:
*(struct btrfs_encoded_read_private *)0xffff88815626eec8 = {
.wait = (wait_queue_head_t){
.lock = (spinlock_t){
.rlock = (struct raw_spinlock){
.raw_lock = (arch_spinlock_t){
.val = (atomic_t){
.counter = (int)-2005885696,
},
.locked = (u8)0,
.pending = (u8)157,
.locked_pending = (u16)40192,
.tail = (u16)34928,
},
.magic = (unsigned int)536325682,
.owner_cpu = (unsigned int)29,
.owner = (void *)__SCT__tp_func_btrfs_transaction_commit+0x0 = 0x0,
.dep_map = (struct lockdep_map){
.key = (struct lock_class_key *)0xffff8881575a3b6c,
.class_cache = (struct lock_class *[2]){ 0xffff8882a71985c0, 0xffffea00066f5d40 },
.name = (const char *)0xffff88815626f100 = "",
.wait_type_outer = (u8)37,
.wait_type_inner = (u8)178,
.lock_type = (u8)154,
},
},
.__padding = (u8 [24]){ 0, 157, 112, 136, 50, 174, 247, 31, 29 },
.dep_map = (struct lockdep_map){
.key = (struct lock_class_key *)0xffff8881575a3b6c,
.class_cache = (struct lock_class *[2]){ 0xffff8882a71985c0, 0xffffea00066f5d40 },
.name = (const char *)0xffff88815626f100 = "",
.wait_type_outer = (u8)37,
.wait_type_inner = (u8)178,
.lock_type = (u8)154,
},
},
.head = (struct list_head){
.next = (struct list_head *)0x112cca,
.prev = (struct list_head *)0x47,
},
},
.pending = (atomic_t){
.counter = (int)-1491499288,
},
.status = (blk_status_t)130,
}
Here we can see several indicators of in-memory data corruption, e.g. the
large negative atomic values of ->pending or
->wait->lock->rlock->raw_lock->val, as well as the bogus spinlock magic
0x1ff7ae32 (decimal 536325682 above) instead of 0xdead4ead or the bogus
pointer values for ->wait->head.
To fix this, change atomic_dec_return() to atomic_dec_and_test() to fix the
corruption, as atomic_dec_return() is defined as two instructions on
x86_64, whereas atomic_dec_and_test() is defined as a single atomic
operation. This can lead to a situation where counter value is already
decremented but the if statement in btrfs_encoded_read_endio() is not
completely processed, i.e. the 0 test has not completed. If another thread
continues executing btrfs_encoded_read_regular_fill_pages() the
atomic_dec_return() there can see an already updated ->pending counter and
continues by freeing the private data. Continuing in the endio handler the
test for 0 succeeds and the wait_queue is woken up, resulting in a
use-after-free.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Suggested-by: Damien Le Moal <Damien.LeMoal@wdc.com>
Fixes: 1881fba89bd5 ("btrfs: add BTRFS_IOC_ENCODED_READ ioctl")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alva Lan <alvalan9@foxmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 44f52bbe96dfdbe4aca3818a2534520082a07040 ]
When a COWing a tree block, at btrfs_cow_block(), and we have the
tracepoint trace_btrfs_cow_block() enabled and preemption is also enabled
(CONFIG_PREEMPT=y), we can trigger a use-after-free in the COWed extent
buffer while inside the tracepoint code. This is because in some paths
that call btrfs_cow_block(), such as btrfs_search_slot(), we are holding
the last reference on the extent buffer @buf so btrfs_force_cow_block()
drops the last reference on the @buf extent buffer when it calls
free_extent_buffer_stale(buf), which schedules the release of the extent
buffer with RCU. This means that if we are on a kernel with preemption,
the current task may be preempted before calling trace_btrfs_cow_block()
and the extent buffer already released by the time trace_btrfs_cow_block()
is called, resulting in a use-after-free.
Fix this by moving the trace_btrfs_cow_block() from btrfs_cow_block() to
btrfs_force_cow_block() before the COWed extent buffer is freed.
This also has a side effect of invoking the tracepoint in the tree defrag
code, at defrag.c:btrfs_realloc_node(), since btrfs_force_cow_block() is
called there, but this is fine and it was actually missing there.
Reported-by: syzbot+8517da8635307182c8a5@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/6759a9b9.050a0220.1ac542.000d.GAE@google.com/
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 95f93bc4cbcac6121a5ee85cd5019ee8e7447e0b ]
Rename and export __btrfs_cow_block() as btrfs_force_cow_block(). This is
to allow to move defrag specific code out of ctree.c and into defrag.c in
one of the next patches.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 44f52bbe96df ("btrfs: fix use-after-free when COWing tree bock and tracing is enabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit fca432e73db2bec0fdbfbf6d98d3ebcd5388a977 upstream.
The following sysfs entries are reading super block member directly,
which can have a different endian and cause wrong values:
- sys/fs/btrfs/<uuid>/nodesize
- sys/fs/btrfs/<uuid>/sectorsize
- sys/fs/btrfs/<uuid>/clone_alignment
Thankfully those values (nodesize and sectorsize) are always aligned
inside the btrfs_super_block, so it won't trigger unaligned read errors,
just endian problems.
Fix them by using the native cached members instead.
Fixes: df93589a1737 ("btrfs: export more from FS_INFO to sysfs")
CC: stable@vger.kernel.org
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2c8507c63f5498d4ee4af404a8e44ceae4345056 upstream.
During swap activation we iterate over the extents of a file and we can
have many thousands of them, so we can end up in a busy loop monopolizing
a core. Avoid this by doing a voluntary reschedule after processing each
extent.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dfb92681a19e1d5172420baa242806414b3eff6f upstream.
[BUG]
There is a bug report in the mailing list where btrfs_run_delayed_refs()
failed to drop the ref count for logical 25870311358464 num_bytes
2113536.
The involved leaf dump looks like this:
item 166 key (25870311358464 168 2113536) itemoff 10091 itemsize 50
extent refs 1 gen 84178 flags 1
ref#0: shared data backref parent 32399126528000 count 0 <<<
ref#1: shared data backref parent 31808973717504 count 1
Notice the count number is 0.
[CAUSE]
There is no concrete evidence yet, but considering 0 -> 1 is also a
single bit flipped, it's possible that hardware memory bitflip is
involved, causing the on-disk extent tree to be corrupted.
[FIX]
To prevent us reading such corrupted extent item, or writing such
damaged extent item back to disk, enhance the handling of
BTRFS_EXTENT_DATA_REF_KEY and BTRFS_SHARED_DATA_REF_KEY keys for both
inlined and key items, to detect such 0 ref count and reject them.
CC: stable@vger.kernel.org # 5.4+
Link: https://lore.kernel.org/linux-btrfs/7c69dd49-c346-4806-86e7-e6f863a66f48@app.fastmail.com/
Reported-by: Frankie Fisher <frankie@terrorise.me.uk>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 69313850dce33ce8c24b38576a279421f4c60996 upstream.
There are reports that system cannot suspend due to running trim because
the task responsible for trimming the device isn't able to finish in
time, especially since we have a free extent discarding phase, which can
trim a lot of unallocated space. There are no limits on the trim size
(unlike the block group part).
Since trime isn't a critical call it can be interrupted at any time,
in such cases we stop the trim, report the amount of discarded bytes and
return an error.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219180
Link: https://bugzilla.suse.com/show_bug.cgi?id=1229737
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Luca Stefani <luca.stefani.ge1@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9c803c474c6c002d8ade68ebe99026cc39c37f85 ]
When activating a swap file we acquire the root's snapshot drew lock and
then check if the root is dead, failing and returning with -EPERM if it's
dead but without unlocking the root's snapshot lock. Fix this by adding
the missing unlock.
Fixes: 60021bd754c6 ("btrfs: prevent subvol with swapfile from being deleted")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 70958a949d852cbecc3d46127bf0b24786df0130 ]
If you follow the seed/sprout wiki, it suggests the following workflow:
btrfstune -S 1 seed_dev
mount seed_dev mnt
btrfs device add sprout_dev
mount -o remount,rw mnt
The first mount mounts the FS readonly, which results in not setting
BTRFS_FS_OPEN, and setting the readonly bit on the sb. The device add
somewhat surprisingly clears the readonly bit on the sb (though the
mount is still practically readonly, from the users perspective...).
Finally, the remount checks the readonly bit on the sb against the flag
and sees no change, so it does not run the code intended to run on
ro->rw transitions, leaving BTRFS_FS_OPEN unset.
As a result, when the cleaner_kthread runs, it sees no BTRFS_FS_OPEN and
does no work. This results in leaking deleted snapshots until we run out
of space.
I propose fixing it at the first departure from what feels reasonable:
when we clear the readonly bit on the sb during device add.
A new fstest I have written reproduces the bug and confirms the fix.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2e8b6bc0ab41ce41e6dfcc204b6cc01d5abbc952 ]
[PROBLEM]
It is very common for udev to trigger device scan, and every time a
mounted btrfs device got re-scan from different soft links, we will get
some of unnecessary device path updates, this is especially common
for LVM based storage:
# lvs
scratch1 test -wi-ao---- 10.00g
scratch2 test -wi-a----- 10.00g
scratch3 test -wi-a----- 10.00g
scratch4 test -wi-a----- 10.00g
scratch5 test -wi-a----- 10.00g
test test -wi-a----- 10.00g
# mkfs.btrfs -f /dev/test/scratch1
# mount /dev/test/scratch1 /mnt/btrfs
# dmesg -c
[ 205.705234] BTRFS: device fsid 7be2602f-9e35-4ecf-a6ff-9e91d2c182c9 devid 1 transid 6 /dev/mapper/test-scratch1 (253:4) scanned by mount (1154)
[ 205.710864] BTRFS info (device dm-4): first mount of filesystem 7be2602f-9e35-4ecf-a6ff-9e91d2c182c9
[ 205.711923] BTRFS info (device dm-4): using crc32c (crc32c-intel) checksum algorithm
[ 205.713856] BTRFS info (device dm-4): using free-space-tree
[ 205.722324] BTRFS info (device dm-4): checking UUID tree
So far so good, but even if we just touched any soft link of
"dm-4", we will get quite some unnecessary device path updates.
# touch /dev/mapper/test-scratch1
# dmesg -c
[ 469.295796] BTRFS info: devid 1 device path /dev/mapper/test-scratch1 changed to /dev/dm-4 scanned by (udev-worker) (1221)
[ 469.300494] BTRFS info: devid 1 device path /dev/dm-4 changed to /dev/mapper/test-scratch1 scanned by (udev-worker) (1221)
Such device path rename is unnecessary and can lead to random path
change due to the udev race.
[CAUSE]
Inside device_list_add(), we are using a very primitive way checking if
the device has changed, strcmp().
Which can never handle links well, no matter if it's hard or soft links.
So every different link of the same device will be treated as a different
device, causing the unnecessary device path update.
[FIX]
Introduce a helper, is_same_device(), and use path_equal() to properly
detect the same block device.
So that the different soft links won't trigger the rename race.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1230641
Reported-by: Fabian Vogt <fvogt@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8cca35cb29f81eba3e96ec44dad8696c8a2f9138 ]
Running fstests btrfs/011 with MKFS_OPTIONS="-O rst" to force the usage of
the RAID stripe-tree, we get the following splat from lockdep:
BTRFS info (device sdd): dev_replace from /dev/sdd (devid 1) to /dev/sdb started
============================================
WARNING: possible recursive locking detected
6.11.0-rc3-btrfs-for-next #599 Not tainted
--------------------------------------------
btrfs/2326 is trying to acquire lock:
ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250
but task is already holding lock:
ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&fs_info->dev_replace.rwsem);
lock(&fs_info->dev_replace.rwsem);
*** DEADLOCK ***
May be due to missing lock nesting notation
1 lock held by btrfs/2326:
#0: ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250
stack backtrace:
CPU: 1 UID: 0 PID: 2326 Comm: btrfs Not tainted 6.11.0-rc3-btrfs-for-next #599
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x80
__lock_acquire+0x2798/0x69d0
? __pfx___lock_acquire+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
lock_acquire+0x19d/0x4a0
? btrfs_map_block+0x39f/0x2250
? __pfx_lock_acquire+0x10/0x10
? find_held_lock+0x2d/0x110
? lock_is_held_type+0x8f/0x100
down_read+0x8e/0x440
? btrfs_map_block+0x39f/0x2250
? __pfx_down_read+0x10/0x10
? do_raw_read_unlock+0x44/0x70
? _raw_read_unlock+0x23/0x40
btrfs_map_block+0x39f/0x2250
? btrfs_dev_replace_by_ioctl+0xd69/0x1d00
? btrfs_bio_counter_inc_blocked+0xd9/0x2e0
? __kasan_slab_alloc+0x6e/0x70
? __pfx_btrfs_map_block+0x10/0x10
? __pfx_btrfs_bio_counter_inc_blocked+0x10/0x10
? kmem_cache_alloc_noprof+0x1f2/0x300
? mempool_alloc_noprof+0xed/0x2b0
btrfs_submit_chunk+0x28d/0x17e0
? __pfx_btrfs_submit_chunk+0x10/0x10
? bvec_alloc+0xd7/0x1b0
? bio_add_folio+0x171/0x270
? __pfx_bio_add_folio+0x10/0x10
? __kasan_check_read+0x20/0x20
btrfs_submit_bio+0x37/0x80
read_extent_buffer_pages+0x3df/0x6c0
btrfs_read_extent_buffer+0x13e/0x5f0
read_tree_block+0x81/0xe0
read_block_for_search+0x4bd/0x7a0
? __pfx_read_block_for_search+0x10/0x10
btrfs_search_slot+0x78d/0x2720
? __pfx_btrfs_search_slot+0x10/0x10
? lock_is_held_type+0x8f/0x100
? kasan_save_track+0x14/0x30
? __kasan_slab_alloc+0x6e/0x70
? kmem_cache_alloc_noprof+0x1f2/0x300
btrfs_get_raid_extent_offset+0x181/0x820
? __pfx_lock_acquire+0x10/0x10
? __pfx_btrfs_get_raid_extent_offset+0x10/0x10
? down_read+0x194/0x440
? __pfx_down_read+0x10/0x10
? do_raw_read_unlock+0x44/0x70
? _raw_read_unlock+0x23/0x40
btrfs_map_block+0x5b5/0x2250
? __pfx_btrfs_map_block+0x10/0x10
scrub_submit_initial_read+0x8fe/0x11b0
? __pfx_scrub_submit_initial_read+0x10/0x10
submit_initial_group_read+0x161/0x3a0
? lock_release+0x20e/0x710
? __pfx_submit_initial_group_read+0x10/0x10
? __pfx_lock_release+0x10/0x10
scrub_simple_mirror.isra.0+0x3eb/0x580
scrub_stripe+0xe4d/0x1440
? lock_release+0x20e/0x710
? __pfx_scrub_stripe+0x10/0x10
? __pfx_lock_release+0x10/0x10
? do_raw_read_unlock+0x44/0x70
? _raw_read_unlock+0x23/0x40
scrub_chunk+0x257/0x4a0
scrub_enumerate_chunks+0x64c/0xf70
? __mutex_unlock_slowpath+0x147/0x5f0
? __pfx_scrub_enumerate_chunks+0x10/0x10
? bit_wait_timeout+0xb0/0x170
? __up_read+0x189/0x700
? scrub_workers_get+0x231/0x300
? up_write+0x490/0x4f0
btrfs_scrub_dev+0x52e/0xcd0
? create_pending_snapshots+0x230/0x250
? __pfx_btrfs_scrub_dev+0x10/0x10
btrfs_dev_replace_by_ioctl+0xd69/0x1d00
? lock_acquire+0x19d/0x4a0
? __pfx_btrfs_dev_replace_by_ioctl+0x10/0x10
? lock_release+0x20e/0x710
? btrfs_ioctl+0xa09/0x74f0
? __pfx_lock_release+0x10/0x10
? do_raw_spin_lock+0x11e/0x240
? __pfx_do_raw_spin_lock+0x10/0x10
btrfs_ioctl+0xa14/0x74f0
? lock_acquire+0x19d/0x4a0
? find_held_lock+0x2d/0x110
? __pfx_btrfs_ioctl+0x10/0x10
? lock_release+0x20e/0x710
? do_sigaction+0x3f0/0x860
? __pfx_do_vfs_ioctl+0x10/0x10
? do_raw_spin_lock+0x11e/0x240
? lockdep_hardirqs_on_prepare+0x270/0x3e0
? _raw_spin_unlock_irq+0x28/0x50
? do_sigaction+0x3f0/0x860
? __pfx_do_sigaction+0x10/0x10
? __x64_sys_rt_sigaction+0x18e/0x1e0
? __pfx___x64_sys_rt_sigaction+0x10/0x10
? __x64_sys_close+0x7c/0xd0
__x64_sys_ioctl+0x137/0x190
do_syscall_64+0x71/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f0bd1114f9b
Code: Unable to access opcode bytes at 0x7f0bd1114f71.
RSP: 002b:00007ffc8a8c3130 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f0bd1114f9b
RDX: 00007ffc8a8c35e0 RSI: 00000000ca289435 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000007
R10: 0000000000000008 R11: 0000000000000246 R12: 00007ffc8a8c6c85
R13: 00000000398e72a0 R14: 0000000000004361 R15: 0000000000000004
</TASK>
This happens because on RAID stripe-tree filesystems we recurse back into
btrfs_map_block() on scrub to perform the logical to device physical
mapping.
But as the device replace task is already holding the dev_replace::rwsem
we deadlock.
So don't take the dev_replace::rwsem in case our task is the task performing
the device replace.
Suggested-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
walk_down_proc()
commit a580fb2c3479d993556e1c31b237c9e5be4944a3 upstream.
We handle errors here properly, ENOMEM isn't fatal, return the error.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Keerthana K <keerthana.kalyanasundaram@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7c4e39f9d2af4abaf82ca0e315d1fd340456620f ]
At btrfs_ref_tree_mod() after we successfully inserted the new ref entry
(local variable 'ref') into the respective block entry's rbtree (local
variable 'be'), if we find an unexpected action of BTRFS_DROP_DELAYED_REF,
we error out and free the ref entry without removing it from the block
entry's rbtree. Then in the error path of btrfs_ref_tree_mod() we call
btrfs_free_ref_cache(), which iterates over all block entries and then
calls free_block_entry() for each one, and there we will trigger a
use-after-free when we are called against the block entry to which we
added the freed ref entry to its rbtree, since the rbtree still points
to the block entry, as we didn't remove it from the rbtree before freeing
it in the error path at btrfs_ref_tree_mod(). Fix this by removing the
new ref entry from the rbtree before freeing it.
Syzbot report this with the following stack traces:
BTRFS error (device loop0 state EA): Ref action 2, root 5, ref_root 0, parent 8564736, owner 0, offset 0, num_refs 18446744073709551615
__btrfs_mod_ref+0x7dd/0xac0 fs/btrfs/extent-tree.c:2523
update_ref_for_cow+0x9cd/0x11f0 fs/btrfs/ctree.c:512
btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594
btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754
btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116
btrfs_insert_empty_items+0x9c/0x1a0 fs/btrfs/ctree.c:4314
btrfs_insert_empty_item fs/btrfs/ctree.h:669 [inline]
btrfs_insert_orphan_item+0x1f1/0x320 fs/btrfs/orphan.c:23
btrfs_orphan_add+0x6d/0x1a0 fs/btrfs/inode.c:3482
btrfs_unlink+0x267/0x350 fs/btrfs/inode.c:4293
vfs_unlink+0x365/0x650 fs/namei.c:4469
do_unlinkat+0x4ae/0x830 fs/namei.c:4533
__do_sys_unlinkat fs/namei.c:4576 [inline]
__se_sys_unlinkat fs/namei.c:4569 [inline]
__x64_sys_unlinkat+0xcc/0xf0 fs/namei.c:4569
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
BTRFS error (device loop0 state EA): Ref action 1, root 5, ref_root 5, parent 0, owner 260, offset 0, num_refs 1
__btrfs_mod_ref+0x76b/0xac0 fs/btrfs/extent-tree.c:2521
update_ref_for_cow+0x96a/0x11f0
btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594
btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754
btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116
btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:411
__btrfs_update_delayed_inode+0x1e7/0xb90 fs/btrfs/delayed-inode.c:1030
btrfs_update_delayed_inode fs/btrfs/delayed-inode.c:1114 [inline]
__btrfs_commit_inode_delayed_items+0x2318/0x24a0 fs/btrfs/delayed-inode.c:1137
__btrfs_run_delayed_items+0x213/0x490 fs/btrfs/delayed-inode.c:1171
btrfs_commit_transaction+0x8a8/0x3740 fs/btrfs/transaction.c:2313
prepare_to_relocate+0x3c4/0x4c0 fs/btrfs/relocation.c:3586
relocate_block_group+0x16c/0xd40 fs/btrfs/relocation.c:3611
btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4081
btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3377
__btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4161
btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4538
BTRFS error (device loop0 state EA): Ref action 2, root 5, ref_root 0, parent 8564736, owner 0, offset 0, num_refs 18446744073709551615
__btrfs_mod_ref+0x7dd/0xac0 fs/btrfs/extent-tree.c:2523
update_ref_for_cow+0x9cd/0x11f0 fs/btrfs/ctree.c:512
btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594
btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754
btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116
btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:411
__btrfs_update_delayed_inode+0x1e7/0xb90 fs/btrfs/delayed-inode.c:1030
btrfs_update_delayed_inode fs/btrfs/delayed-inode.c:1114 [inline]
__btrfs_commit_inode_delayed_items+0x2318/0x24a0 fs/btrfs/delayed-inode.c:1137
__btrfs_run_delayed_items+0x213/0x490 fs/btrfs/delayed-inode.c:1171
btrfs_commit_transaction+0x8a8/0x3740 fs/btrfs/transaction.c:2313
prepare_to_relocate+0x3c4/0x4c0 fs/btrfs/relocation.c:3586
relocate_block_group+0x16c/0xd40 fs/btrfs/relocation.c:3611
btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4081
btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3377
__btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4161
btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4538
==================================================================
BUG: KASAN: slab-use-after-free in rb_first+0x69/0x70 lib/rbtree.c:473
Read of size 8 at addr ffff888042d1af38 by task syz.0.0/5329
CPU: 0 UID: 0 PID: 5329 Comm: syz.0.0 Not tainted 6.12.0-rc7-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
rb_first+0x69/0x70 lib/rbtree.c:473
free_block_entry+0x78/0x230 fs/btrfs/ref-verify.c:248
btrfs_free_ref_cache+0xa3/0x100 fs/btrfs/ref-verify.c:917
btrfs_ref_tree_mod+0x139f/0x15e0 fs/btrfs/ref-verify.c:898
btrfs_free_extent+0x33c/0x380 fs/btrfs/extent-tree.c:3544
__btrfs_mod_ref+0x7dd/0xac0 fs/btrfs/extent-tree.c:2523
update_ref_for_cow+0x9cd/0x11f0 fs/btrfs/ctree.c:512
btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594
btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754
btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116
btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:411
__btrfs_update_delayed_inode+0x1e7/0xb90 fs/btrfs/delayed-inode.c:1030
btrfs_update_delayed_inode fs/btrfs/delayed-inode.c:1114 [inline]
__btrfs_commit_inode_delayed_items+0x2318/0x24a0 fs/btrfs/delayed-inode.c:1137
__btrfs_run_delayed_items+0x213/0x490 fs/btrfs/delayed-inode.c:1171
btrfs_commit_transaction+0x8a8/0x3740 fs/btrfs/transaction.c:2313
prepare_to_relocate+0x3c4/0x4c0 fs/btrfs/relocation.c:3586
relocate_block_group+0x16c/0xd40 fs/btrfs/relocation.c:3611
btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4081
btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3377
__btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4161
btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4538
btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3673
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f996df7e719
RSP: 002b:00007f996ede7038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f996e135f80 RCX: 00007f996df7e719
RDX: 0000000020000180 RSI: 00000000c4009420 RDI: 0000000000000004
RBP: 00007f996dff139e R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007f996e135f80 R15: 00007fff79f32e68
</TASK>
Allocated by task 5329:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:257 [inline]
__kmalloc_cache_noprof+0x19c/0x2c0 mm/slub.c:4295
kmalloc_noprof include/linux/slab.h:878 [inline]
kzalloc_noprof include/linux/slab.h:1014 [inline]
btrfs_ref_tree_mod+0x264/0x15e0 fs/btrfs/ref-verify.c:701
btrfs_free_extent+0x33c/0x380 fs/btrfs/extent-tree.c:3544
__btrfs_mod_ref+0x7dd/0xac0 fs/btrfs/extent-tree.c:2523
update_ref_for_cow+0x9cd/0x11f0 fs/btrfs/ctree.c:512
btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594
btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754
btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116
btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:411
__btrfs_update_delayed_inode+0x1e7/0xb90 fs/btrfs/delayed-inode.c:1030
btrfs_update_delayed_inode fs/btrfs/delayed-inode.c:1114 [inline]
__btrfs_commit_inode_delayed_items+0x2318/0x24a0 fs/btrfs/delayed-inode.c:1137
__btrfs_run_delayed_items+0x213/0x490 fs/btrfs/delayed-inode.c:1171
btrfs_commit_transaction+0x8a8/0x3740 fs/btrfs/transaction.c:2313
prepare_to_relocate+0x3c4/0x4c0 fs/btrfs/relocation.c:3586
relocate_block_group+0x16c/0xd40 fs/btrfs/relocation.c:3611
btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4081
btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3377
__btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4161
btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4538
btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3673
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 5329:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x59/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:230 [inline]
slab_free_hook mm/slub.c:2342 [inline]
slab_free mm/slub.c:4579 [inline]
kfree+0x1a0/0x440 mm/slub.c:4727
btrfs_ref_tree_mod+0x136c/0x15e0
btrfs_free_extent+0x33c/0x380 fs/btrfs/extent-tree.c:3544
__btrfs_mod_ref+0x7dd/0xac0 fs/btrfs/extent-tree.c:2523
update_ref_for_cow+0x9cd/0x11f0 fs/btrfs/ctree.c:512
btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594
btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754
btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116
btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:411
__btrfs_update_delayed_inode+0x1e7/0xb90 fs/btrfs/delayed-inode.c:1030
btrfs_update_delayed_inode fs/btrfs/delayed-inode.c:1114 [inline]
__btrfs_commit_inode_delayed_items+0x2318/0x24a0 fs/btrfs/delayed-inode.c:1137
__btrfs_run_delayed_items+0x213/0x490 fs/btrfs/delayed-inode.c:1171
btrfs_commit_transaction+0x8a8/0x3740 fs/btrfs/transaction.c:2313
prepare_to_relocate+0x3c4/0x4c0 fs/btrfs/relocation.c:3586
relocate_block_group+0x16c/0xd40 fs/btrfs/relocation.c:3611
btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4081
btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3377
__btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4161
btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4538
btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3673
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ffff888042d1af00
which belongs to the cache kmalloc-64 of size 64
The buggy address is located 56 bytes inside of
freed 64-byte region [ffff888042d1af00, ffff888042d1af40)
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x42d1a
anon flags: 0x4fff00000000000(node=1|zone=1|lastcpupid=0x7ff)
page_type: f5(slab)
raw: 04fff00000000000 ffff88801ac418c0 0000000000000000 dead000000000001
raw: 0000000000000000 0000000000200020 00000001f5000000 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x52c40(GFP_NOFS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP), pid 5055, tgid 5055 (dhcpcd-run-hook), ts 40377240074, free_ts 40376848335
set_page_owner include/linux/page_owner.h:32 [inline]
post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1541
prep_new_page mm/page_alloc.c:1549 [inline]
get_page_from_freelist+0x3649/0x3790 mm/page_alloc.c:3459
__alloc_pages_noprof+0x292/0x710 mm/page_alloc.c:4735
alloc_pages_mpol_noprof+0x3e8/0x680 mm/mempolicy.c:2265
alloc_slab_page+0x6a/0x140 mm/slub.c:2412
allocate_slab+0x5a/0x2f0 mm/slub.c:2578
new_slab mm/slub.c:2631 [inline]
___slab_alloc+0xcd1/0x14b0 mm/slub.c:3818
__slab_alloc+0x58/0xa0 mm/slub.c:3908
__slab_alloc_node mm/slub.c:3961 [inline]
slab_alloc_node mm/slub.c:4122 [inline]
__do_kmalloc_node mm/slub.c:4263 [inline]
__kmalloc_noprof+0x25a/0x400 mm/slub.c:4276
kmalloc_noprof include/linux/slab.h:882 [inline]
kzalloc_noprof include/linux/slab.h:1014 [inline]
tomoyo_encode2 security/tomoyo/realpath.c:45 [inline]
tomoyo_encode+0x26f/0x540 security/tomoyo/realpath.c:80
tomoyo_realpath_from_path+0x59e/0x5e0 security/tomoyo/realpath.c:283
tomoyo_get_realpath security/tomoyo/file.c:151 [inline]
tomoyo_check_open_permission+0x255/0x500 security/tomoyo/file.c:771
security_file_open+0x777/0x990 security/security.c:3109
do_dentry_open+0x369/0x1460 fs/open.c:945
vfs_open+0x3e/0x330 fs/open.c:1088
do_open fs/namei.c:3774 [inline]
path_openat+0x2c84/0x3590 fs/namei.c:3933
page last free pid 5055 tgid 5055 stack trace:
reset_page_owner include/linux/page_owner.h:25 [inline]
free_pages_prepare mm/page_alloc.c:1112 [inline]
free_unref_page+0xcfb/0xf20 mm/page_alloc.c:2642
free_pipe_info+0x300/0x390 fs/pipe.c:860
put_pipe_info fs/pipe.c:719 [inline]
pipe_release+0x245/0x320 fs/pipe.c:742
__fput+0x23f/0x880 fs/file_table.c:431
__do_sys_close fs/open.c:1567 [inline]
__se_sys_close fs/open.c:1552 [inline]
__x64_sys_close+0x7f/0x110 fs/open.c:1552
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Memory state around the buggy address:
ffff888042d1ae00: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff888042d1ae80: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
>ffff888042d1af00: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
^
ffff888042d1af80: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
ffff888042d1b000: 00 00 00 00 00 fc fc 00 00 00 00 00 fc fc 00 00
Reported-by: syzbot+7325f164162e200000c1@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/673723eb.050a0220.1324f8.00a8.GAE@google.com/T/#u
Fixes: fd708b81d972 ("Btrfs: add a extent ref verify tool")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3ed51857a50f530ac7a1482e069dfbd1298558d4 ]
Syzbot reports a null-ptr-deref in btrfs_search_slot().
The reproducer is using rescue=ibadroots, and the extent tree root is
corrupted thus the extent tree is NULL.
When scrub tries to search the extent tree to gather the needed extent
info, btrfs_search_slot() doesn't check if the target root is NULL or
not, resulting the null-ptr-deref.
Add sanity check for btrfs root before using it in btrfs_search_slot().
Reported-by: syzbot+3030e17bd57a73d39bd7@syzkaller.appspotmail.com
Fixes: 42437a6386ff ("btrfs: introduce mount option rescue=ignorebadroots")
Link: https://syzkaller.appspot.com/bug?extid=3030e17bd57a73d39bd7
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Tested-by: syzbot+3030e17bd57a73d39bd7@syzkaller.appspotmail.com
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ed67f2a913a4f0fc505db29805c41dd07d3cb356 ]
When checking for delayed refs when verifying if there are cross
references for a data extent, we stop if the path has nowait set and we
can't try lock the delayed ref head's mutex, returning -EAGAIN with the
goal of making a write fallback to a blocking context. However we ignore
the -EAGAIN at btrfs_cross_ref_exist() when check_delayed_ref() returns
it, and keep looping instead of immediately returning the -EAGAIN to the
caller.
Fix this by not looping if we get -EAGAIN and we have a nowait path.
Fixes: 26ce91144631 ("btrfs: make can_nocow_extent nowait compatible")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit bb3868033a4cccff7be57e9145f2117cbdc91c11 upstream.
When freeing a tree block, at btrfs_free_tree_block(), if we fail to
create a delayed reference we don't deal with the error and just do a
BUG_ON(). The error most likely to happen is -ENOMEM, and we have a
comment mentioning that only -ENOMEM can happen, but that is not true,
because in case qgroups are enabled any error returned from
btrfs_qgroup_trace_extent_post() (can be -EUCLEAN or anything returned
from btrfs_search_slot() for example) can be propagated back to
btrfs_free_tree_block().
So stop doing a BUG_ON() and return the error to the callers and make
them abort the transaction to prevent leaking space. Syzbot was
triggering this, likely due to memory allocation failure injection.
Reported-by: syzbot+a306f914b4d01b3958fe@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/000000000000fcba1e05e998263c@google.com/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[ Resolve minor conflicts ]
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c9a75ec45f1111ef530ab186c2a7684d0a0c9245 upstream.
At insert_delayed_ref() if we need to update the action of an existing
ref to BTRFS_DROP_DELAYED_REF, we delete the ref from its ref head's
ref_add_list using list_del(), which leaves the ref's add_list member
not reinitialized, as list_del() sets the next and prev members of the
list to LIST_POISON1 and LIST_POISON2, respectively.
If later we end up calling drop_delayed_ref() against the ref, which can
happen during merging or when destroying delayed refs due to a transaction
abort, we can trigger a crash since at drop_delayed_ref() we call
list_empty() against the ref's add_list, which returns false since
the list was not reinitialized after the list_del() and as a consequence
we call list_del() again at drop_delayed_ref(). This results in an
invalid list access since the next and prev members are set to poison
pointers, resulting in a splat if CONFIG_LIST_HARDENED and
CONFIG_DEBUG_LIST are set or invalid poison pointer dereferences
otherwise.
So fix this by deleting from the list with list_del_init() instead.
Fixes: 1d57ee941692 ("btrfs: improve delayed refs iterations")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bf9821ba4792a0d9a2e72803ae7b4341faf3d532 upstream.
When btrfs reserves an extent and does not use it (e.g, by an error), it
calls btrfs_free_reserved_extent() to free the reserved extent. In the
process, it calls btrfs_add_free_space() and then it accounts the region
bytes as block_group->zone_unusable.
However, it leaves the space_info->bytes_zone_unusable side not updated. As
a result, ENOSPC can happen while a space_info reservation succeeded. The
reservation is fine because the freed region is not added in
space_info->bytes_zone_unusable, leaving that space as "free". OTOH,
corresponding block group counts it as zone_unusable and its allocation
pointer is not rewound, we cannot allocate an extent from that block group.
That will also negate space_info's async/sync reclaim process, and cause an
ENOSPC error from the extent allocation process.
Fix that by returning the space to space_info->bytes_zone_unusable.
Ideally, since a bio is not submitted for this reserved region, we should
return the space to free space and rewind the allocation pointer. But, it
needs rework on extent allocation handling, so let it work in this way for
now.
Fixes: 169e0da91a21 ("btrfs: zoned: track unusable bytes for zones")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 75f49c3dc7b7423d3734f2e4dabe3dac8d064338 upstream.
The ret may be zero in btrfs_search_dir_index_item() and should not
passed to ERR_PTR(). Now btrfs_unlink_subvol() is the only caller to
this, reconstructed it to check ERR_PTR(-ENOENT) while ret >= 0.
This fixes smatch warnings:
fs/btrfs/dir-item.c:353
btrfs_search_dir_index_item() warn: passing zero to 'ERR_PTR'
Fixes: 9dcbe16fccbb ("btrfs: use btrfs_for_each_slot in btrfs_search_dir_index_item")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2ab5e243c2266c841e0f6904fad1514b18eaf510 upstream.
The function read_alloc_one_name() does not initialize the name field of
the passed fscrypt_str struct if kmalloc fails to allocate the
corresponding buffer. Thus, it is not guaranteed that
fscrypt_str.name is initialized when freeing it.
This is a follow-up to the linked patch that fixes the remaining
instances of the bug introduced by commit e43eec81c516 ("btrfs: use
struct qstr instead of name and namelen pairs").
Link: https://lore.kernel.org/linux-btrfs/20241009080833.1355894-1-jroi.martin@gmail.com/
Fixes: e43eec81c516 ("btrfs: use struct qstr instead of name and namelen pairs")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Roi Martin <jroi.martin@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 66691c6e2f18d2aa4b22ffb624b9bdc97e9979e4 upstream.
The add_inode_ref() function does not initialize the "name" struct when
it is declared. If any of the following calls to "read_one_inode()
returns NULL,
dir = read_one_inode(root, parent_objectid);
if (!dir) {
ret = -ENOENT;
goto out;
}
inode = read_one_inode(root, inode_objectid);
if (!inode) {
ret = -EIO;
goto out;
}
then "name.name" would be freed on "out" before being initialized.
out:
...
kfree(name.name);
This issue was reported by Coverity with CID 1526744.
Fixes: e43eec81c516 ("btrfs: use struct qstr instead of name and namelen pairs")
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Roi Martin <jroi.martin@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a99fcb0158978ed332009449b484e5f3ca2d7df4 upstream.
Per Qu Wenruo in case we have a very large disk, e.g. 8TiB device,
mostly empty although we will do the split according to our super block
locations, the last super block ends at 256G, we can submit a huge
discard for the range [256G, 8T), causing a large delay.
Split the space left to discard based on BTRFS_MAX_DISCARD_CHUNK_SIZE in
preparation of introduction of cancellation points to trim. The value
of the chunk size is arbitrary, it can be higher or derived from actual
device capabilities but we can't easily read that using
bio_discard_limit().
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219180
Link: https://bugzilla.suse.com/show_bug.cgi?id=1229737
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Luca Stefani <luca.stefani.ge1@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fe4cd7ed128fe82ab9fe4f9fc8a73d4467699787 ]
At btrfs_load_zone_info() we have an error path that is dereferencing
the name of a device which is a RCU string but we are not holding a RCU
read lock, which is incorrect.
Fix this by using btrfs_err_in_rcu() instead of btrfs_err().
The problem is there since commit 08e11a3db098 ("btrfs: zoned: load zone's
allocation offset"), back then at btrfs_load_block_group_zone_info() but
then later on that code was factored out into the helper
btrfs_load_zone_info() by commit 09a46725cc84 ("btrfs: zoned: factor out
per-zone logic from btrfs_load_block_group_zone_info").
Fixes: 08e11a3db098 ("btrfs: zoned: load zone's allocation offset")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit db7e68b522c01eb666cfe1f31637775f18997811 ]
Since the inception of relocation we have maintained the backref cache
across transaction commits, updating the backref cache with the new
bytenr whenever we COWed blocks that were in the cache, and then
updating their bytenr once we detected a transaction id change.
This works as long as we're only ever modifying blocks, not changing the
structure of the tree.
However relocation does in fact change the structure of the tree. For
example, if we are relocating a data extent, we will look up all the
leaves that point to this data extent. We will then call
do_relocation() on each of these leaves, which will COW down to the leaf
and then update the file extent location.
But, a key feature of do_relocation() is the pending list. This is all
the pending nodes that we modified when we updated the file extent item.
We will then process all of these blocks via finish_pending_nodes, which
calls do_relocation() on all of the nodes that led up to that leaf.
The purpose of this is to make sure we don't break sharing unless we
absolutely have to. Consider the case that we have 3 snapshots that all
point to this leaf through the same nodes, the initial COW would have
created a whole new path. If we did this for all 3 snapshots we would
end up with 3x the number of nodes we had originally. To avoid this we
will cycle through each of the snapshots that point to each of these
nodes and update their pointers to point at the new nodes.
Once we update the pointer to the new node we will drop the node we
removed the link for and all of its children via btrfs_drop_subtree().
This is essentially just btrfs_drop_snapshot(), but for an arbitrary
point in the snapshot.
The problem with this is that we will never reflect this in the backref
cache. If we do this btrfs_drop_snapshot() for a node that is in the
backref tree, we will leave the node in the backref tree. This becomes
a problem when we change the transid, as now the backref cache has
entire subtrees that no longer exist, but exist as if they still are
pointed to by the same roots.
In the best case scenario you end up with "adding refs to an existing
tree ref" errors from insert_inline_extent_backref(), where we attempt
to link in nodes on roots that are no longer valid.
Worst case you will double free some random block and re-use it when
there's still references to the block.
This is extremely subtle, and the consequences are quite bad. There
isn't a way to make sure our backref cache is consistent between
transid's.
In order to fix this we need to simply evict the entire backref cache
anytime we cross transid's. This reduces performance in that we have to
rebuild this backref cache every time we change transid's, but fixes the
bug.
This has existed since relocation was added, and is a pretty critical
bug. There's a lot more cleanup that can be done now that this
functionality is going away, but this patch is as small as possible in
order to fix the problem and make it easy for us to backport it to all
the kernels it needs to be backported to.
Followup series will dismantle more of this code and simplify relocation
drastically to remove this functionality.
We have a reproducer that reproduced the corruption within a few minutes
of running. With this patch it survives several iterations/hours of
running the reproducer.
Fixes: 3fd0a5585eb9 ("Btrfs: Metadata ENOSPC handling for balance")
CC: stable@vger.kernel.org
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ab7c8bbf3a088730e58da224bcad512f1dd9ca74 ]
Lots of the functions in relocation.c don't change pointer parameters
but lack the annotations. Add them and reformat according to current
coding style if needed.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: db7e68b522c0 ("btrfs: drop the backref cache during relocation if we commit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 32f2abca380fedc60f7a8d3288e4c9586672e207 ]
btrfs_should_ignore_reloc_root() is a predicate so it should return
bool.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: db7e68b522c0 ("btrfs: drop the backref cache during relocation if we commit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 41fd1e94066a815a7ab0a7025359e9b40e4b3576 upstream.
During unmount, at close_ctree(), we have the following steps in this order:
1) Park the cleaner kthread - this doesn't destroy the kthread, it basically
halts its execution (wake ups against it work but do nothing);
2) We stop the cleaner kthread - this results in freeing the respective
struct task_struct;
3) We call btrfs_stop_all_workers() which waits for any jobs running in all
the work queues and then free the work queues.
Syzbot reported a case where a fixup worker resulted in a crash when doing
a delayed iput on its inode while attempting to wake up the cleaner at
btrfs_add_delayed_iput(), because the task_struct of the cleaner kthread
was already freed. This can happen during unmount because we don't wait
for any fixup workers still running before we call kthread_stop() against
the cleaner kthread, which stops and free all its resources.
Fix this by waiting for any fixup workers at close_ctree() before we call
kthread_stop() against the cleaner and run pending delayed iputs.
The stack traces reported by syzbot were the following:
BUG: KASAN: slab-use-after-free in __lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065
Read of size 8 at addr ffff8880272a8a18 by task kworker/u8:3/52
CPU: 1 UID: 0 PID: 52 Comm: kworker/u8:3 Not tainted 6.12.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: btrfs-fixup btrfs_work_helper
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
__lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162
class_raw_spinlock_irqsave_constructor include/linux/spinlock.h:551 [inline]
try_to_wake_up+0xb0/0x1480 kernel/sched/core.c:4154
btrfs_writepage_fixup_worker+0xc16/0xdf0 fs/btrfs/inode.c:2842
btrfs_work_helper+0x390/0xc50 fs/btrfs/async-thread.c:314
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Allocated by task 2:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
unpoison_slab_object mm/kasan/common.c:319 [inline]
__kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:345
kasan_slab_alloc include/linux/kasan.h:247 [inline]
slab_post_alloc_hook mm/slub.c:4086 [inline]
slab_alloc_node mm/slub.c:4135 [inline]
kmem_cache_alloc_node_noprof+0x16b/0x320 mm/slub.c:4187
alloc_task_struct_node kernel/fork.c:180 [inline]
dup_task_struct+0x57/0x8c0 kernel/fork.c:1107
copy_process+0x5d1/0x3d50 kernel/fork.c:2206
kernel_clone+0x223/0x880 kernel/fork.c:2787
kernel_thread+0x1bc/0x240 kernel/fork.c:2849
create_kthread kernel/kthread.c:412 [inline]
kthreadd+0x60d/0x810 kernel/kthread.c:765
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Freed by task 61:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x59/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:230 [inline]
slab_free_hook mm/slub.c:2343 [inline]
slab_free mm/slub.c:4580 [inline]
kmem_cache_free+0x1a2/0x420 mm/slub.c:4682
put_task_struct include/linux/sched/task.h:144 [inline]
delayed_put_task_struct+0x125/0x300 kernel/exit.c:228
rcu_do_batch kernel/rcu/tree.c:2567 [inline]
rcu_core+0xaaa/0x17a0 kernel/rcu/tree.c:2823
handle_softirqs+0x2c5/0x980 kernel/softirq.c:554
__do_softirq kernel/softirq.c:588 [inline]
invoke_softirq kernel/softirq.c:428 [inline]
__irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637
irq_exit_rcu+0x9/0x30 kernel/softirq.c:649
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1037 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1037
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
Last potentially related work creation:
kasan_save_stack+0x3f/0x60 mm/kasan/common.c:47
__kasan_record_aux_stack+0xac/0xc0 mm/kasan/generic.c:541
__call_rcu_common kernel/rcu/tree.c:3086 [inline]
call_rcu+0x167/0xa70 kernel/rcu/tree.c:3190
context_switch kernel/sched/core.c:5318 [inline]
__schedule+0x184b/0x4ae0 kernel/sched/core.c:6675
schedule_idle+0x56/0x90 kernel/sched/core.c:6793
do_idle+0x56a/0x5d0 kernel/sched/idle.c:354
cpu_startup_entry+0x42/0x60 kernel/sched/idle.c:424
start_secondary+0x102/0x110 arch/x86/kernel/smpboot.c:314
common_startup_64+0x13e/0x147
The buggy address belongs to the object at ffff8880272a8000
which belongs to the cache task_struct of size 7424
The buggy address is located 2584 bytes inside of
freed 7424-byte region [ffff8880272a8000, ffff8880272a9d00)
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x272a8
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0xfff00000000040(head|node=0|zone=1|lastcpupid=0x7ff)
page_type: f5(slab)
raw: 00fff00000000040 ffff88801bafa500 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080040004 00000001f5000000 0000000000000000
head: 00fff00000000040 ffff88801bafa500 dead000000000122 0000000000000000
head: 0000000000000000 0000000080040004 00000001f5000000 0000000000000000
head: 00fff00000000003 ffffea00009caa01 ffffffffffffffff 0000000000000000
head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 2, tgid 2 (kthreadd), ts 71247381401, free_ts 71214998153
set_page_owner include/linux/page_owner.h:32 [inline]
post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1537
prep_new_page mm/page_alloc.c:1545 [inline]
get_page_from_freelist+0x3039/0x3180 mm/page_alloc.c:3457
__alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4733
alloc_pages_mpol_noprof+0x3e8/0x680 mm/mempolicy.c:2265
alloc_slab_page+0x6a/0x120 mm/slub.c:2413
allocate_slab+0x5a/0x2f0 mm/slub.c:2579
new_slab mm/slub.c:2632 [inline]
___slab_alloc+0xcd1/0x14b0 mm/slub.c:3819
__slab_alloc+0x58/0xa0 mm/slub.c:3909
__slab_alloc_node mm/slub.c:3962 [inline]
slab_alloc_node mm/slub.c:4123 [inline]
kmem_cache_alloc_node_noprof+0x1fe/0x320 mm/slub.c:4187
alloc_task_struct_node kernel/fork.c:180 [inline]
dup_task_struct+0x57/0x8c0 kernel/fork.c:1107
copy_process+0x5d1/0x3d50 kernel/fork.c:2206
kernel_clone+0x223/0x880 kernel/fork.c:2787
kernel_thread+0x1bc/0x240 kernel/fork.c:2849
create_kthread kernel/kthread.c:412 [inline]
kthreadd+0x60d/0x810 kernel/kthread.c:765
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
page last free pid 5230 tgid 5230 stack trace:
reset_page_owner include/linux/page_owner.h:25 [inline]
free_pages_prepare mm/page_alloc.c:1108 [inline]
free_unref_page+0xcd0/0xf00 mm/page_alloc.c:2638
discard_slab mm/slub.c:2678 [inline]
__put_partials+0xeb/0x130 mm/slub.c:3146
put_cpu_partial+0x17c/0x250 mm/slub.c:3221
__slab_free+0x2ea/0x3d0 mm/slub.c:4450
qlink_free mm/kasan/quarantine.c:163 [inline]
qlist_free_all+0x9a/0x140 mm/kasan/quarantine.c:179
kasan_quarantine_reduce+0x14f/0x170 mm/kasan/quarantine.c:286
__kasan_slab_alloc+0x23/0x80 mm/kasan/common.c:329
kasan_slab_alloc include/linux/kasan.h:247 [inline]
slab_post_alloc_hook mm/slub.c:4086 [inline]
slab_alloc_node mm/slub.c:4135 [inline]
kmem_cache_alloc_noprof+0x135/0x2a0 mm/slub.c:4142
getname_flags+0xb7/0x540 fs/namei.c:139
do_sys_openat2+0xd2/0x1d0 fs/open.c:1409
do_sys_open fs/open.c:1430 [inline]
__do_sys_openat fs/open.c:1446 [inline]
__se_sys_openat fs/open.c:1441 [inline]
__x64_sys_openat+0x247/0x2a0 fs/open.c:1441
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Memory state around the buggy address:
ffff8880272a8900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880272a8980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8880272a8a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8880272a8a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880272a8b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Reported-by: syzbot+8aaf2df2ef0164ffe1fb@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/66fb36b1.050a0220.aab67.003b.GAE@google.com/
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fa630df665aa9ddce3a96ce7b54e10a38e4d2a2b upstream.
During an incremental send we may end up sending an invalid clone
operation, for the last extent of a file which ends at an unaligned offset
that matches the final i_size of the file in the send snapshot, in case
the file had its initial size (the size in the parent snapshot) decreased
in the send snapshot. In this case the destination will fail to apply the
clone operation because its end offset is not sector size aligned and it
ends before the current size of the file.
Sending the truncate operation always happens when we finish processing an
inode, after we process all its extents (and xattrs, names, etc). So fix
this by ensuring the file has a valid size before we send a clone
operation for an unaligned extent that ends at the final i_size of the
file. The size we truncate to matches the start offset of the clone range
but it could be any value between that start offset and the final size of
the file since the clone operation will expand the i_size if the current
size is smaller than the end offset. The start offset of the range was
chosen because it's always sector size aligned and avoids a truncation
into the middle of a page, which results in dirtying the page due to
filling part of it with zeroes and then making the clone operation at the
receiver trigger IO.
The following test reproduces the issue:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Create a file with a size of 256K + 5 bytes, having two extents, one
# with a size of 128K and another one with a size of 128K + 5 bytes.
last_ext_size=$((128 * 1024 + 5))
xfs_io -f -d -c "pwrite -S 0xab -b 128K 0 128K" \
-c "pwrite -S 0xcd -b $last_ext_size 128K $last_ext_size" \
$MNT/foo
# Another file which we will later clone foo into, but initially with
# a larger size than foo.
xfs_io -f -c "pwrite -S 0xef 0 1M" $MNT/bar
btrfs subvolume snapshot -r $MNT/ $MNT/snap1
# Now resize bar and clone foo into it.
xfs_io -c "truncate 0" \
-c "reflink $MNT/foo" $MNT/bar
btrfs subvolume snapshot -r $MNT/ $MNT/snap2
rm -f /tmp/send-full /tmp/send-inc
btrfs send -f /tmp/send-full $MNT/snap1
btrfs send -p $MNT/snap1 -f /tmp/send-inc $MNT/snap2
umount $MNT
mkfs.btrfs -f $DEV
mount $DEV $MNT
btrfs receive -f /tmp/send-full $MNT
btrfs receive -f /tmp/send-inc $MNT
umount $MNT
Running it before this patch:
$ ./test.sh
(...)
At subvol snap1
At snapshot snap2
ERROR: failed to clone extents to bar: Invalid argument
A test case for fstests will be sent soon.
Reported-by: Ben Millwood <thebenmachine@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAJhrHS2z+WViO2h=ojYvBPDLsATwLbg+7JaNCyYomv0fUxEpQQ@mail.gmail.com/
Fixes: 46a6e10a1ab1 ("btrfs: send: allow cloning non-aligned extent if it ends at i_size")
CC: stable@vger.kernel.org # 6.11
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c3b47f49e83197e8dffd023ec568403bcdbb774b upstream.
[BUG]
Syzbot reported a NULL pointer dereference with the following crash:
FAULT_INJECTION: forcing a failure.
start_transaction+0x830/0x1670 fs/btrfs/transaction.c:676
prepare_to_relocate+0x31f/0x4c0 fs/btrfs/relocation.c:3642
relocate_block_group+0x169/0xd20 fs/btrfs/relocation.c:3678
...
BTRFS info (device loop0): balance: ended with status: -12
Oops: general protection fault, probably for non-canonical address 0xdffffc00000000cc: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000660-0x0000000000000667]
RIP: 0010:btrfs_update_reloc_root+0x362/0xa80 fs/btrfs/relocation.c:926
Call Trace:
<TASK>
commit_fs_roots+0x2ee/0x720 fs/btrfs/transaction.c:1496
btrfs_commit_transaction+0xfaf/0x3740 fs/btrfs/transaction.c:2430
del_balance_item fs/btrfs/volumes.c:3678 [inline]
reset_balance_state+0x25e/0x3c0 fs/btrfs/volumes.c:3742
btrfs_balance+0xead/0x10c0 fs/btrfs/volumes.c:4574
btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3673
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[CAUSE]
The allocation failure happens at the start_transaction() inside
prepare_to_relocate(), and during the error handling we call
unset_reloc_control(), which makes fs_info->balance_ctl to be NULL.
Then we continue the error path cleanup in btrfs_balance() by calling
reset_balance_state() which will call del_balance_item() to fully delete
the balance item in the root tree.
However during the small window between set_reloc_contrl() and
unset_reloc_control(), we can have a subvolume tree update and created a
reloc_root for that subvolume.
Then we go into the final btrfs_commit_transaction() of
del_balance_item(), and into btrfs_update_reloc_root() inside
commit_fs_roots().
That function checks if fs_info->reloc_ctl is in the merge_reloc_tree
stage, but since fs_info->reloc_ctl is NULL, it results a NULL pointer
dereference.
[FIX]
Just add extra check on fs_info->reloc_ctl inside
btrfs_update_reloc_root(), before checking
fs_info->reloc_ctl->merge_reloc_tree.
That DEAD_RELOC_TREE handling is to prevent further modification to the
reloc tree during merge stage, but since there is no reloc_ctl at all,
we do not need to bother that.
Reported-by: syzbot+283673dbc38527ef9f3d@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/66f6bfa7.050a0220.38ace9.0019.GAE@google.com/
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7ee85f5515e86a4e2a2f51969795920733912bad ]
When doing concurrent lseek(2) system calls against the same file
descriptor, using multiple threads belonging to the same process, we have
a short time window where a race happens and can result in a memory leak.
The race happens like this:
1) A program opens a file descriptor for a file and then spawns two
threads (with the pthreads library for example), lets call them
task A and task B;
2) Task A calls lseek with SEEK_DATA or SEEK_HOLE and ends up at
file.c:find_desired_extent() while holding a read lock on the inode;
3) At the start of find_desired_extent(), it extracts the file's
private_data pointer into a local variable named 'private', which has
a value of NULL;
4) Task B also calls lseek with SEEK_DATA or SEEK_HOLE, locks the inode
in shared mode and enters file.c:find_desired_extent(), where it also
extracts file->private_data into its local variable 'private', which
has a NULL value;
5) Because it saw a NULL file private, task A allocates a private
structure and assigns to the file structure;
6) Task B also saw a NULL file private so it also allocates its own file
private and then assigns it to the same file structure, since both
tasks are using the same file descriptor.
At this point we leak the private structure allocated by task A.
Besides the memory leak, there's also the detail that both tasks end up
using the same cached state record in the private structure (struct
btrfs_file_private::llseek_cached_state), which can result in a
use-after-free problem since one task can free it while the other is
still using it (only one task took a reference count on it). Also, sharing
the cached state is not a good idea since it could result in incorrect
results in the future - right now it should not be a problem because it
end ups being used only in extent-io-tree.c:count_range_bits() where we do
range validation before using the cached state.
Fix this by protecting the private assignment and check of a file while
holding the inode's spinlock and keep track of the task that allocated
the private, so that it's used only by that task in order to prevent
user-after-free issues with the cached state record as well as potentially
using it incorrectly in the future.
Fixes: 3c32c7212f16 ("btrfs: use cached state when looking for delalloc ranges with lseek")
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 68539bd0e73b457f88a9d00cabb6533ec8582dc9 ]
Update the comment for the lock named "lock" in struct btrfs_inode because
it does not mention that the fields "delalloc_bytes", "defrag_bytes",
"csum_bytes", "outstanding_extents" and "disk_i_size" are also protected
by that lock.
Also add a comment on top of each field protected by this lock to mention
that the lock protects them.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 7ee85f5515e8 ("btrfs: fix race setting file private on concurrent lseek using same fd")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 398fb9131f31bd25aa187613c9942f4232e952b7 ]
Previous commit created a hole in struct btrfs_inode, we can move
outstanding_extents there. This reduces size by 8 bytes from 1120 to
1112 on a release config.
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 7ee85f5515e8 ("btrfs: fix race setting file private on concurrent lseek using same fd")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 77b0b98bb743f5d04d8f995ba1936e1143689d4a ]
In commit 75258f20fb70 ("btrfs: subpage: dump extra subpage bitmaps for
debug") an internal macro GET_SUBPAGE_BITMAP() is introduced to grab the
bitmap of each attribute.
But that commit is using bitmap_cut() which will do the left shift of
the larger bitmap, causing incorrect values.
Thankfully this bitmap_cut() is only called for debug usage, and so far
it's not yet causing problem.
Fix it to use bitmap_read() to only grab the desired sub-bitmap.
Fixes: 75258f20fb70 ("btrfs: subpage: dump extra subpage bitmaps for debug")
CC: stable@vger.kernel.org # 6.6+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 3368597206dc3c6c3c2247ee146beada14c67380 upstream.
Even in case of failure we could've discarded some data and userspace
should be made aware of it, so copy fstrim_range to userspace
regardless.
Also make sure to update the trimmed bytes amount even if
btrfs_trim_free_extents fails.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Luca Stefani <luca.stefani.ge1@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b0b595e61d97de61c15b379b754b2caa90e83e5c upstream.
[BUG]
There are some reports about invalid data backref objectids, the report
looks like this:
BTRFS critical (device sda): corrupt leaf: block=333654787489792 slot=110 extent bytenr=333413935558656 len=65536 invalid data ref objectid value 2543
The data ref objectid is the inode number inside the subvolume.
But in above case, the value is completely sane, not really showing the
problem.
[CAUSE]
The root cause of the problem is the deprecated feature, inode cache.
This feature results a special inode number, -12ULL, and it's no longer
recognized by tree-checker, triggering the error.
The direct problem here is the output of data ref objectid. The value
shown is in fact the dref_root (subvolume id), not the dref_objectid
(inode number).
[FIX]
Fix the output to use dref_objectid instead.
Reported-by: Neil Parton <njparton@gmail.com>
Reported-by: Archange <archange@archlinux.org>
Link: https://lore.kernel.org/linux-btrfs/CAAYHqBbrrgmh6UmW3ANbysJX9qG9Pbg3ZwnKsV=5mOpv_qix_Q@mail.gmail.com/
Link: https://lore.kernel.org/linux-btrfs/9541deea-9056-406e-be16-a996b549614d@archlinux.org/
Fixes: f333a3c7e832 ("btrfs: tree-checker: validate dref root and objectid")
CC: stable@vger.kernel.org # 6.11
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3bc2ac2f8f0b78a13140fc72022771efe0c9b778 ]
Unlink changes the link count on the target inode. POSIX mandates that
the ctime must also change when this occurs.
According to https://pubs.opengroup.org/onlinepubs/9699919799/functions/unlink.html:
"Upon successful completion, unlink() shall mark for update the last data
modification and last file status change timestamps of the parent
directory. Also, if the file's link count is not 0, the last file status
change timestamp of the file shall be marked for update."
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add link to the opengroup docs ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit cd9253c23aedd61eb5ff11f37a36247cd46faf86 upstream.
If we have 2 threads that are using the same file descriptor and one of
them is doing direct IO writes while the other is doing fsync, we have a
race where we can end up either:
1) Attempt a fsync without holding the inode's lock, triggering an
assertion failures when assertions are enabled;
2) Do an invalid memory access from the fsync task because the file private
points to memory allocated on stack by the direct IO task and it may be
used by the fsync task after the stack was destroyed.
The race happens like this:
1) A user space program opens a file descriptor with O_DIRECT;
2) The program spawns 2 threads using libpthread for example;
3) One of the threads uses the file descriptor to do direct IO writes,
while the other calls fsync using the same file descriptor.
4) Call task A the thread doing direct IO writes and task B the thread
doing fsyncs;
5) Task A does a direct IO write, and at btrfs_direct_write() sets the
file's private to an on stack allocated private with the member
'fsync_skip_inode_lock' set to true;
6) Task B enters btrfs_sync_file() and sees that there's a private
structure associated to the file which has 'fsync_skip_inode_lock' set
to true, so it skips locking the inode's VFS lock;
7) Task A completes the direct IO write, and resets the file's private to
NULL since it had no prior private and our private was stack allocated.
Then it unlocks the inode's VFS lock;
8) Task B enters btrfs_get_ordered_extents_for_logging(), then the
assertion that checks the inode's VFS lock is held fails, since task B
never locked it and task A has already unlocked it.
The stack trace produced is the following:
assertion failed: inode_is_locked(&inode->vfs_inode), in fs/btrfs/ordered-data.c:983
------------[ cut here ]------------
kernel BUG at fs/btrfs/ordered-data.c:983!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 9 PID: 5072 Comm: worker Tainted: G U OE 6.10.5-1-default #1 openSUSE Tumbleweed 69f48d427608e1c09e60ea24c6c55e2ca1b049e8
Hardware name: Acer Predator PH315-52/Covini_CFS, BIOS V1.12 07/28/2020
RIP: 0010:btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs]
Code: 50 d6 86 c0 e8 (...)
RSP: 0018:ffff9e4a03dcfc78 EFLAGS: 00010246
RAX: 0000000000000054 RBX: ffff9078a9868e98 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff907dce4a7800 RDI: ffff907dce4a7800
RBP: ffff907805518800 R08: 0000000000000000 R09: ffff9e4a03dcfb38
R10: ffff9e4a03dcfb30 R11: 0000000000000003 R12: ffff907684ae7800
R13: 0000000000000001 R14: ffff90774646b600 R15: 0000000000000000
FS: 00007f04b96006c0(0000) GS:ffff907dce480000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f32acbfc000 CR3: 00000001fd4fa005 CR4: 00000000003726f0
Call Trace:
<TASK>
? __die_body.cold+0x14/0x24
? die+0x2e/0x50
? do_trap+0xca/0x110
? do_error_trap+0x6a/0x90
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? exc_invalid_op+0x50/0x70
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? asm_exc_invalid_op+0x1a/0x20
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
btrfs_sync_file+0x21a/0x4d0 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? __seccomp_filter+0x31d/0x4f0
__x64_sys_fdatasync+0x4f/0x90
do_syscall_64+0x82/0x160
? do_futex+0xcb/0x190
? __x64_sys_futex+0x10e/0x1d0
? switch_fpu_return+0x4f/0xd0
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Another problem here is if task B grabs the private pointer and then uses
it after task A has finished, since the private was allocated in the stack
of task A, it results in some invalid memory access with a hard to predict
result.
This issue, triggering the assertion, was observed with QEMU workloads by
two users in the Link tags below.
Fix this by not relying on a file's private to pass information to fsync
that it should skip locking the inode and instead pass this information
through a special value stored in current->journal_info. This is safe
because in the relevant section of the direct IO write path we are not
holding a transaction handle, so current->journal_info is NULL.
The following C program triggers the issue:
$ cat repro.c
/* Get the O_DIRECT definition. */
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <stdint.h>
#include <fcntl.h>
#include <errno.h>
#include <string.h>
#include <pthread.h>
static int fd;
static ssize_t do_write(int fd, const void *buf, size_t count, off_t offset)
{
while (count > 0) {
ssize_t ret;
ret = pwrite(fd, buf, count, offset);
if (ret < 0) {
if (errno == EINTR)
continue;
return ret;
}
count -= ret;
buf += ret;
}
return 0;
}
static void *fsync_loop(void *arg)
{
while (1) {
int ret;
ret = fsync(fd);
if (ret != 0) {
perror("Fsync failed");
exit(6);
}
}
}
int main(int argc, char *argv[])
{
long pagesize;
void *write_buf;
pthread_t fsyncer;
int ret;
if (argc != 2) {
fprintf(stderr, "Use: %s <file path>\n", argv[0]);
return 1;
}
fd = open(argv[1], O_WRONLY | O_CREAT | O_TRUNC | O_DIRECT, 0666);
if (fd == -1) {
perror("Failed to open/create file");
return 1;
}
pagesize = sysconf(_SC_PAGE_SIZE);
if (pagesize == -1) {
perror("Failed to get page size");
return 2;
}
ret = posix_memalign(&write_buf, pagesize, pagesize);
if (ret) {
perror("Failed to allocate buffer");
return 3;
}
ret = pthread_create(&fsyncer, NULL, fsync_loop, NULL);
if (ret != 0) {
fprintf(stderr, "Failed to create writer thread: %d\n", ret);
return 4;
}
while (1) {
ret = do_write(fd, write_buf, pagesize, 0);
if (ret != 0) {
perror("Write failed");
exit(5);
}
}
return 0;
}
$ mkfs.btrfs -f /dev/sdi
$ mount /dev/sdi /mnt/sdi
$ timeout 10 ./repro /mnt/sdi/foo
Usually the race is triggered within less than 1 second. A test case for
fstests will follow soon.
Reported-by: Paulo Dias <paulo.miguel.dias@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219187
Reported-by: Andreas Jahn <jahn-andi@web.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219199
Reported-by: syzbot+4704b3cc972bd76024f1@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/00000000000044ff540620d7dee2@google.com/
Fixes: 939b656bc8ab ("btrfs: fix corruption after buffer fault in during direct IO append write")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b8e947e9f64cac9df85a07672b658df5b2bcff07 ]
Some arch + compiler combinations report a potentially unused variable
location in btrfs_lookup_dentry(). This is a false alert as the variable
is passed by value and always valid or there's an error. The compilers
cannot probably reason about that although btrfs_inode_by_name() is in
the same file.
> + /kisskb/src/fs/btrfs/inode.c: error: 'location.objectid' may be used
+uninitialized in this function [-Werror=maybe-uninitialized]: => 5603:9
> + /kisskb/src/fs/btrfs/inode.c: error: 'location.type' may be used
+uninitialized in this function [-Werror=maybe-uninitialized]: => 5674:5
m68k-gcc8/m68k-allmodconfig
mips-gcc8/mips-allmodconfig
powerpc-gcc5/powerpc-all{mod,yes}config
powerpc-gcc5/ppc64_defconfig
Initialize it to zero, this should fix the warnings and won't change the
behaviour as btrfs_inode_by_name() accepts only a root or inode item
types, otherwise returns an error.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/linux-btrfs/bd4e9928-17b3-9257-8ba7-6b7f9bbb639a@linux-m68k.org/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b56329a782314fde5b61058e2a25097af7ccb675 ]
Instead of a BUG_ON() just return an error, log an error message and
abort the transaction in case we find an extent buffer belonging to the
relocation tree that doesn't have the full backref flag set. This is
unexpected and should never happen (save for bugs or a potential bad
memory).
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b8ccef048354074a548f108e51d0557d6adfd3a3 ]
In reada we BUG_ON(refs == 0), which could be unkind since we aren't
holding a lock on the extent leaf and thus could get a transient
incorrect answer. In walk_down_proc we also BUG_ON(refs == 0), which
could happen if we have extent tree corruption. Change that to return
-EUCLEAN. In do_walk_down() we catch this case and handle it correctly,
however we return -EIO, which -EUCLEAN is a more appropriate error code.
Finally in walk_up_proc we have the same BUG_ON(refs == 0), so convert
that to proper error handling. Also adjust the error message so we can
actually do something with the information.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
