| Age | Commit message (Collapse) | Author |
|---|
|
PageError is not used by the VFS/MM and deprecated because it uses up a
page bit and has no coherent rules. Instead read errors are usually
propagated by not setting or clearing the uptodate bit, and write errors
are propagated through the address_space. Btrfs now only sets the flag
and never clears it for data pages, so just remove all places setting it,
and the subpage error bit.
Note that the error propagation for superblock writes that work on the
block device mapping still uses PageError for now, but that will be
addressed in a separate series.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
__extent_writepage currenly sets PageError whenever any error happens,
and the also checks for PageError to decide if to call error handling.
This leads to very unclear responsibility for cleaning up on errors.
In the VM and generic writeback helpers the basic idea is that once
I/O is fired off all error handling responsibility is delegated to the
end I/O handler. But if that end I/O handler sets the PageError bit,
and the submitter checks it, the bit could in some cases leak into the
submission context for fast enough I/O.
Fix this by simply not checking PageError and just using the local
ret variable to check for submission errors. This also fundamentally
solves the long problem documented in a comment in __extent_writepage
by never leaking the error bit into the submission context.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_verify_page is called from the readpage completion handler, which
is only used to read pages, or parts of pages that aren't uptodate yet.
The only case where PageError could be set on a page in btrfs is if we
had a previous writeback error, but in that case we won't called readpage
on it, as it has previously been marked uptodate.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Also clear the uptodate bit to make sure the page isn't seen as uptodate
in the page cache if fsverity verification fails.
Fixes: 146054090b08 ("btrfs: initial fsverity support")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Split all the conditionals for the fsverity calls in end_page_read into
a btrfs_verify_page helper to keep the code readable and make additional
refactoring easier.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The range_end field in struct writeback_control is inclusive, just like
the end parameter passed to extent_write_locked_range. Not doing this
could cause extra writeout, which is harmless but suboptimal.
Fixes: 771ed689d2cd ("Btrfs: Optimize compressed writeback and reads")
CC: stable@vger.kernel.org # 5.9+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In function end_bio_extent_readpage() we call
endio_readpage_release_extent() to unlock the extent io tree.
However we pass PageUptodate(page) as @uptodate parameter for it, while
for previous end_page_read() call, we use a dedicated @uptodate local
variable.
This is not a big deal, as even for subpage cases, either the bio only
covers part of the page, then the @uptodate is always false, and the
subpage ranges can still be merged.
But for the sake of consistency, always use @uptodate variable when
possible.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
efficiently
Currently alloc_extent_buffer() would make the extent buffer uptodate if
the corresponding pages are also uptodate.
But this check is only checking PageUptodate, which is fine for regular
cases, but not for subpage cases, as we can have multiple extent buffers
in the same page.
So here we go btrfs_page_test_uptodate() instead.
The old code doesn't cause any problem, but is not efficient, as it
would cause extra metadata read even if the range is already uptodate.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is a bug report that assert_eb_page_uptodate() gets triggered for
free space tree metadata.
Without proper dump for the subpage bitmaps it's much harder to debug.
Thus this patch would dump all the subpage bitmaps (split them into
their own bitmaps) for a easier debugging.
The output would look like this:
(Dumped after a tree block got read from disk)
page:000000006e34bf49 refcount:4 mapcount:0 mapping:0000000067661ac4 index:0x1d1 pfn:0x110e9
memcg:ffff0000d7d62000
aops:btree_aops [btrfs] ino:1
flags: 0x8000000000002002(referenced|private|zone=2)
page_type: 0xffffffff()
raw: 8000000000002002 0000000000000000 dead000000000122 ffff00000188bed0
raw: 00000000000001d1 ffff0000c7992700 00000004ffffffff ffff0000d7d62000
page dumped because: btrfs subpage dump
BTRFS warning (device dm-1): start=30490624 len=16384 page=30474240 bitmaps: uptodate=4-7 error= dirty= writeback= ordered= checked=
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that all extent state bit helpers effectively take the GFP_NOFS mask
(and GFP_NOWAIT is encoded in the bits) we can remove the parameter.
This reduces stack consumption in many functions and simplifies a lot of
code.
Net effect on module on a release build:
text data bss dec hex filename
1250432 20985 16088 1287505 13a551 pre/btrfs.ko
1247074 20985 16088 1284147 139833 post/btrfs.ko
DELTA: -3358
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Most of the code in write_one_subpage_eb and write_one_eb is shared,
so merge the two functions into one.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of locking and unlocking every page or the extent, just add a
new EXTENT_BUFFER_READING bit that mirrors EXTENT_BUFFER_WRITEBACK
for synchronizing threads trying to read an extent_buffer and to wait
for I/O completion.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The only place that reads in pages and thus marks them uptodate for
the btree inode is read_extent_buffer_pages. Which means that either
pages are already uptodate from an old buffer when creating a new
one in alloc_extent_buffer, or they will be updated by ca call
to read_extent_buffer_pages. This means the checks for uptodate
pages in read_extent_buffer_pages and read_extent_buffer_subpage are
superfluous and can be removed.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
PageError is only used to limit the uptodate check in
assert_eb_page_uptodate. But we have a much more useful flag indicating
the exact condition we are about with the EXTENT_BUFFER_WRITE_ERR flag,
so use that instead and help the kernel toward eventually removing
PageError.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
No need to track the number of pages under I/O now that each
extent_buffer is read and written using a single bio. For the
read side we need to grab an extra reference for the duration of
the I/O to prevent eviction, though.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we always use a single bio to write an extent_buffer, the buffer
can be passed to the end_io handler as private data. This allows
to simplify the metadata write end I/O handler, and merge the subpage
end_io handler into the main one.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The btrfs_bio_ctrl machinery is overkill for writing extent_buffers
as we always operate on PAGE_SIZE chunks (or one smaller one for the
subpage case) that are contiguous and are guaranteed to fit into a
single bio. Replace it with open coded btrfs_bio_alloc, __bio_add_page
and btrfs_submit_bio calls.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Locking the pages in lock_extent_buffer_for_io only for the non-subpage
case is very confusing. Move it to write_one_eb to mirror the subpage
case and simplify the code. Now lock_extent_buffer_for_io does not leave
all the pages locked and each is individually locked/unlocked in
write_one_eb.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Stop trying to cluster writes of multiple extent_buffers into a single
bio. There is no need for that as the blk_plug mechanism used all the
way up in writeback_inodes_wb gives us the same I/O pattern even with
multiple bios. Removing the clustering simplifies
lock_extent_buffer_for_io a lot and will also allow passing the eb
as private data to the end I/O handler.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
lock_extent_buffer_for_io never returns a negative error value, so switch
the return value to a simple bool.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ keep noinline_for_stack ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Only subpage metadata reads lock the extent. Don't try to unlock it and
waste cycles in the extent tree lookup for PAGE_SIZE or larger metadata.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we always use a single bio to read an extent_buffer, the buffer
can be passed to the end_io handler as private data. This allows
implementing a much simplified dedicated end I/O handler for metadata
reads.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Given that read recovery for data I/O is handled in the storage layer,
the mirror_num argument to btrfs_submit_compressed_read is always 0,
so remove it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The btrfs_bio_ctrl machinery is overkill for reading extent_buffers
as we always operate on PAGE_SIZE chunks (or one smaller one for the
subpage case) that are contiguous and are guaranteed to fit into a
single bio. Replace it with open coded btrfs_bio_alloc, __bio_add_page
and btrfs_submit_bio calls in a helper function shared between
the subpage and node size >= PAGE_SIZE cases.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently read_extent_buffer_pages skips pages that are already uptodate
when reading in an extent_buffer. While this reduces the amount of data
read, it increases the number of I/O operations as we now need to do
multiple I/Os when reading an extent buffer with one or more uptodate
pages in the middle of it. On any modern storage device, be that hard
drives or SSDs this actually decreases I/O performance. Fortunately
this case is pretty rare as the pages are always initially read together
and then aged the same way. Besides simplifying the code a bit as-is
this will allow for major simplifications to the I/O completion handler
later on.
Note that the case where all pages are uptodate is still handled by an
optimized fast path that does not read any data from disk.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Call btrfs_page_clear_uptodate instead of ClearPageUptodate to properly
manage the uptodate bit for the subpage case.
Reported-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
extent_buffer_under_io is only used in extent_io.c, so mark it static.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When btrfs_redirty_list_add redirties a buffer, it also acquires
an extra reference that is released on transaction commit. But
this is not required as buffers that are dirty or under writeback
are never freed (look for calls to extent_buffer_under_io())).
Remove the extra reference and the infrastructure used to drop it
again.
History behind redirty logic:
In the first place, it used releasing_list to hold all the
to-be-released extent buffers, and decided which buffers to re-dirty at
the commit time. Then, in a later version, the behaviour got changed to
re-dirty a necessary buffer and add re-dirtied one to the list in
btrfs_free_tree_block(). In short, the list was there mostly for the
patch series' historical reason.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[ add Naohiro's comment regarding history ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
dirty_metadata_bytes is decremented in both places that clear the dirty
bit in a buffer, but only incremented in btrfs_mark_buffer_dirty, which
means that a buffer that is redirtied using btrfs_redirty_list_add won't
be added to dirty_metadata_bytes, but it will be subtracted when written
out, leading an inconsistency in the counter.
Move the dirty_metadata_bytes from btrfs_mark_buffer_dirty into
set_extent_buffer_dirty to also account for the redirty case, and remove
the now unused set_extent_buffer_dirty return value.
Fixes: d3575156f662 ("btrfs: zoned: redirty released extent buffers")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we're doing a lot of work for btrfs_bio:
- Checksum verification for data read bios
- Bio splits if it crosses stripe boundary
- Read repair for data read bios
However for the incoming scrub patches, we don't want this extra
functionality at all, just plain logical + mirror -> physical mapping
ability.
Thus here we do the following changes:
- Introduce btrfs_bio::fs_info
This is for the new scrub specific btrfs_bio, which would not populate
btrfs_bio::inode.
Thus we need such new member to grab a fs_info
This new member will always be populated.
- Replace @inode argument with @fs_info for btrfs_bio_init() and its
caller
Since @inode is no longer a mandatory member, replace it with
@fs_info, and let involved users populate @inode.
- Skip checksum verification and generation if @bbio->inode is NULL
- Add extra ASSERT()s
To make sure:
* bbio->inode is properly set for involved read repair path
* if @file_offset is set, bbio->inode is also populated
- Grab @fs_info from @bbio directly
We can no longer go @bbio->inode->root->fs_info, as bbio->inode can be
NULL. This involves:
* btrfs_simple_end_io()
* should_async_write()
* btrfs_wq_submit_bio()
* btrfs_use_zone_append()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
REQ_CGROUP_PUNT is a bit annoying as it is hard to follow and adds
a branch to the bio submission hot path. To fix this, export
blkcg_punt_bio_submit and let btrfs call it directly. Add a new
REQ_FS_PRIVATE flag for btrfs to indicate to it's own low-level
bio submission code that a punt to the cgroup submission helper
is required.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
punt_to_cgroup is only used by extent_write_locked_range, but that
function also directly controls the bio flags for the actual submission.
Remove th punt_to_cgroup field, and just set REQ_CGROUP_PUNT directly
in extent_write_locked_range.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Return the containing struct btrfs_bio instead of the less type safe
struct bio from btrfs_bio_alloc.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The bio in struct btrfs_bio_ctrl must be a btrfs_bio, so store a pointer
to the btrfs_bio for better type checking.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
struct btrfs_bio now has an always valid inode pointer that can be used
to find the inode in submit_one_bio, so use that and initialize all
variables for which it is possible at declaration time.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_submit_compressed_read expects the bio passed to it to be embedded
into a btrfs_bio structure. Pass the btrfs_bio directly to increase type
safety and make the code self-documenting.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_submit_bio expects the bio passed to it to be embedded into a
btrfs_bio structure. Pass the btrfs_bio directly to increase type
safety and make the code self-documenting.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Nowadays calc_bio_boundaries() is a relatively simple function that only
guarantees the one bio equals to one ordered extent rule for uncompressed
Zone Append bios.
Sink it into it's only caller alloc_new_bio().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
bio_add_page always adds either the entire range passed to it or nothing.
Based on that btrfs_bio_add_page can only return a length smaller than
the passed in one when hitting the ordered extent limit, which can only
happen for writes. Given that compressed writes never even use this code
path, this means that all the special cases for compressed extent offset
handling are dead code.
Reflow submit_extent_page to take advantage of this by inlining
btrfs_bio_add_page and handling the ordered extent limit by decrementing
it for each added range and thus significantly simplifying the loop.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Different loop iterations in btrfs_bio_add_page not only have the same
contiguity parameters, but also any non-initial operation operates on a
fresh bio anyway.
Factor out the contiguity check into a new btrfs_bio_is_contig and only
call it once in submit_extent_page before descending into the
bio_add_page loop.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Remove the has_error and saved_ret variables, and just jump to a goto
label for error handling from the only place returning an error from the
main loop.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
submit_extent_page always returns 0 since commit d5e4377d5051 ("btrfs:
split zone append bios in btrfs_submit_bio"). Change it to a void return
type and remove all the unreachable error handling code in the callers.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Update the compress_type in the btrfs_bio_ctrl after forcing out the
previous bio in btrfs_do_readpage, so that alloc_new_bio can just use
the compress_type member in struct btrfs_bio_ctrl instead of passing the
same information redundantly as a function argument.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Rename this_bio_flag to compress_type to match the surrounding code
and better document the intent. Also use the proper enum type instead
of unsigned long.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The compress_type can only change on a per-extent basis. So instead of
checking it for every page in btrfs_bio_add_page, do the check once in
btrfs_do_readpage, which is the only caller of btrfs_bio_add_page and
submit_extent_page that deals with compressed extents.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of passing down the wbc pointer the deep call chain, just
add it to the btrfs_bio_ctrl structure.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The sync_io flag is equivalent to wbc->sync_mode == WB_SYNC_ALL, so
just check for that and remove the separate flag.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The bio op and flags never change over the life time of a bio_ctrl,
so move it in there instead of passing it down the deep call chain
all the way down to alloc_new_bio.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If force_bio_submit, submit_extent_page simply calls submit_one_bio as
the first thing. This can just be moved to the only caller that sets
force_bio_submit to true.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When read_extent_buffer_subpage calls submit_extent_page, it does
so on a freshly initialized btrfs_bio_ctrl structure that can't have
a valid bio to submit. Clear the force_bio_submit parameter to false
as there is nothing to submit.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
