| Age | Commit message (Collapse) | Author |
|---|
|
btrfs_lookup_ordered_extent() is supposed to query the offset in a file
instead of the logical address. Pass the file offset from
submit_extent_page() to calc_bio_boundaries().
Also, calc_bio_boundaries() relies on the bio's operation flag, so move
the call site after setting it.
Fixes: 390ed29b817e ("btrfs: refactor submit_extent_page() to make bio and its flag tracing easier")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add support for fsverity in btrfs. To support the generic interface in
fs/verity, we add two new item types in the fs tree for inodes with
verity enabled. One stores the per-file verity descriptor and btrfs
verity item and the other stores the Merkle tree data itself.
Verity checking is done in end_page_read just before a page is marked
uptodate. This naturally handles a variety of edge cases like holes,
preallocated extents, and inline extents. Some care needs to be taken to
not try to verity pages past the end of the file, which are accessed by
the generic buffered file reading code under some circumstances like
reading to the end of the last page and trying to read again. Direct IO
on a verity file falls back to buffered reads.
Verity relies on PageChecked for the Merkle tree data itself to avoid
re-walking up shared paths in the tree. For this reason, we need to
cache the Merkle tree data. Since the file is immutable after verity is
turned on, we can cache it at an index past EOF.
Use the new inode ro_flags to store verity on the inode item, so that we
can enable verity on a file, then rollback to an older kernel and still
mount the file system and read the file. Since we can't safely write the
file anymore without ruining the invariants of the Merkle tree, we mark
a ro_compat flag on the file system when a file has verity enabled.
Acked-by: Eric Biggers <ebiggers@google.com>
Co-developed-by: Chris Mason <clm@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When btrfs_run_delalloc_range() failed, we will error out.
But there is a strange comment mentioning that
btrfs_run_delalloc_range() could have returned value >0 to indicate the
IO has already started.
Commit 40f765805f08 ("Btrfs: split up __extent_writepage to lower stack
usage") introduced the comment, but unfortunately at that time, we were
already using @page_started to indicate that case, and still return 0.
Furthermore, even if that comment was right (which is not), we would
return -EIO if the IO had already started.
By all means the comment is incorrect, just remove the comment along
with the dead check.
Just to be extra safe, add an ASSERT() in btrfs_run_delalloc_range() to
make sure we either return 0 or error, no positive return value.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The offset and can never be negative use unsigned int instead of int
type for them.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
When running btrfs/160 in a loop for subpage with experimental
compression support, it has a high chance to crash (~20%):
BTRFS critical (device dm-7): panic in __btrfs_add_ordered_extent:238: inconsistency in ordered tree at offset 0 (errno=-17 Object already exists)
------------[ cut here ]------------
kernel BUG at fs/btrfs/ordered-data.c:238!
Internal error: Oops - BUG: 0 [#1] SMP
pc : __btrfs_add_ordered_extent+0x550/0x670 [btrfs]
lr : __btrfs_add_ordered_extent+0x550/0x670 [btrfs]
Call trace:
__btrfs_add_ordered_extent+0x550/0x670 [btrfs]
btrfs_add_ordered_extent+0x2c/0x50 [btrfs]
run_delalloc_nocow+0x81c/0x8fc [btrfs]
btrfs_run_delalloc_range+0xa4/0x390 [btrfs]
writepage_delalloc+0xc0/0x1ac [btrfs]
__extent_writepage+0xf4/0x370 [btrfs]
extent_write_cache_pages+0x288/0x4f4 [btrfs]
extent_writepages+0x58/0xe0 [btrfs]
btrfs_writepages+0x1c/0x30 [btrfs]
do_writepages+0x60/0x110
__filemap_fdatawrite_range+0x108/0x170
filemap_fdatawrite_range+0x20/0x30
btrfs_fdatawrite_range+0x34/0x4dc [btrfs]
__btrfs_write_out_cache+0x34c/0x480 [btrfs]
btrfs_write_out_cache+0x144/0x220 [btrfs]
btrfs_start_dirty_block_groups+0x3ac/0x6b0 [btrfs]
btrfs_commit_transaction+0xd0/0xbb4 [btrfs]
btrfs_sync_fs+0x64/0x1cc [btrfs]
sync_fs_one_sb+0x3c/0x50
iterate_supers+0xcc/0x1d4
ksys_sync+0x6c/0xd0
__arm64_sys_sync+0x1c/0x30
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0x4c/0xd4
do_el0_svc+0x30/0x9c
el0_svc+0x2c/0x54
el0_sync_handler+0x1a8/0x1b0
el0_sync+0x198/0x1c0
---[ end trace 336f67369ae6e0af ]---
[CAUSE]
For subpage case, we can have multiple sectors inside a page, this makes
it possible for __extent_writepage() to have part of its page submitted
before returning.
In btrfs/160, we are using dm-dust to emulate write error, this means
for certain pages, we could have everything running fine, but at the end
of __extent_writepage(), one of the submitted bios fails due to dm-dust.
Then the page is marked Error, and we change @ret from 0 to -EIO.
This makes the caller extent_write_cache_pages() to error out, without
submitting the remaining pages.
Furthermore, since we're erroring out for free space cache, it doesn't
really care about the error and will update the inode and retry the
writeback.
Then we re-run the delalloc range, and will try to insert the same
delalloc range while previous delalloc range is still hanging there,
triggering the above error.
[FIX]
The proper fix is to handle errors from __extent_writepage() properly,
by ending the remaining ordered extent.
But that fix needs the following changes:
- Know at exactly which sector the error happened
Currently __extent_writepage_io() works for the full page, can't
return at which sector we hit the error.
- Grab the ordered extent covering the failed sector
As a hotfix for subpage case, here we unify the error paths in
__extent_writepage().
In fact, the "if (PageError(page))" branch never get executed if @ret is
still 0 for non-subpage cases.
As for non-subpage case, we never submit current page in
__extent_writepage(), but only add current page into bio.
The bio can only get submitted in next page.
Thus we never get PageError() set due to IO failure, thus when we hit
the branch, @ret is never 0.
By simply removing that @ret assignment, we let subpage case ignore the
IO failure, thus only error out for fatal errors just like regular
sectorsize.
So that IO error won't be treated as fatal error not trigger the hanging
OE problem.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Current submit_extent_page() just checks if the current page range can
be fitted into current bio, and if not, submit then re-add.
But this behavior can't handle subpage case at all.
For subpage case, the problem is in the page size, 64K, which is also
the same size as stripe size.
This means, if we can't fit a full 64K into a bio, due to stripe limit,
then it won't fit into next bio without crossing stripe either.
The proper way to handle it is:
- Check how many bytes we can be put into current bio
- Put as many bytes as possible into current bio first
- Submit current bio
- Create a new bio
- Add the remaining bytes into the new bio
Refactor submit_extent_page() so that it does the above iteration.
The main loop inside submit_extent_page() will look like this:
cur = pg_offset;
while (cur < pg_offset + size) {
u32 offset = cur - pg_offset;
int added;
if (!bio_ctrl->bio) {
/* Allocate new bio if needed */
}
/* Add as many bytes into the bio */
added = btrfs_bio_add_page();
if (added < size - offset) {
/* The current bio is full, submit it */
}
cur += added;
}
Also, since we're doing new bio allocation deep inside the main loop,
extract that code into a new helper, alloc_new_bio().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
When running fsstress with subpage RW support, there are random
BUG_ON()s triggered with the following trace:
kernel BUG at fs/btrfs/file-item.c:667!
Internal error: Oops - BUG: 0 [#1] SMP
CPU: 1 PID: 3486 Comm: kworker/u13:2 5.11.0-rc4-custom+ #43
Hardware name: Radxa ROCK Pi 4B (DT)
Workqueue: btrfs-worker-high btrfs_work_helper [btrfs]
pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
pc : btrfs_csum_one_bio+0x420/0x4e0 [btrfs]
lr : btrfs_csum_one_bio+0x400/0x4e0 [btrfs]
Call trace:
btrfs_csum_one_bio+0x420/0x4e0 [btrfs]
btrfs_submit_bio_start+0x20/0x30 [btrfs]
run_one_async_start+0x28/0x44 [btrfs]
btrfs_work_helper+0x128/0x1b4 [btrfs]
process_one_work+0x22c/0x430
worker_thread+0x70/0x3a0
kthread+0x13c/0x140
ret_from_fork+0x10/0x30
[CAUSE]
Above BUG_ON() means there is some bio range which doesn't have ordered
extent, which indeed is worth a BUG_ON().
Unlike regular sectorsize == PAGE_SIZE case, in subpage we have extra
subpage dirty bitmap to record which range is dirty and should be
written back.
This means, if we submit bio for a subpage range, we do not only need to
clear page dirty, but also need to clear subpage dirty bits.
In __extent_writepage_io(), we will call btrfs_page_clear_dirty() for
any range we submit a bio.
But there is loophole, if we hit a range which is beyond i_size, we just
call btrfs_writepage_endio_finish_ordered() to finish the ordered io,
then break out, without clearing the subpage dirty.
This means, if we hit above branch, the subpage dirty bits are still
there, if other range of the page get dirtied and we need to writeback
that page again, we will submit bio for the old range, leaving a wild
bio range which doesn't have ordered extent.
[FIX]
Fix it by always calling btrfs_page_clear_dirty() in
__extent_writepage_io().
Also to avoid such problem from happening again, add a new assert,
btrfs_page_assert_not_dirty(), to make sure both page dirty and subpage
dirty bits are cleared before exiting __extent_writepage_io().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In btrfs_do_readpage(), we never reset @this_bio_flag after we hit a
compressed extent.
This is fine, as for PAGE_SIZE == sectorsize case, we can only have one
sector for one page, thus @this_bio_flag will only be set at most once.
But for subpage case, after hitting a compressed extent, @this_bio_flag
will always have EXTENT_BIO_COMPRESSED bit, even we're reading a regular
extent.
This will lead to various read errors, and causing new ASSERT() in
incoming subpage patches, which adds more strict check in
btrfs_submit_compressed_read().
Fix it by declaring @this_bio_flag inside the main loop and reset its
value for each iteration.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The uptodate parameter should be bool, change the type.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since commit d75855b4518b ("btrfs: Remove
extent_io_ops::writepage_start_hook") removes the writepage_start_hook()
and adds btrfs_writepage_cow_fixup() function, there is no need to
follow the old hook parameters.
Remove the @start and @end hook, since currently the fixup check is full
page check, it doesn't need @start and @end hook.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There used to be a patch in the original series for zoned support which
limited the extent size to max_zone_append_size, but this patch has been
dropped somewhere around v9.
We've decided to go the opposite direction, instead of limiting extents
in the first place we split them before submission to comply with the
device's limits.
Remove the related code, btrfs_fs_info::max_zone_append_size and
btrfs_zoned_device_info::max_zone_append_size.
This also removes the workaround for dm-crypt introduced in
1d68128c107a ("btrfs: zoned: fail mount if the device does not support
zone append") because the fix has been merged as f34ee1dce642 ("dm
crypt: Fix zoned block device support").
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
There is a very rare ASSERT() triggering during full fstests run for
subpage rw support.
No other reproducer so far.
The ASSERT() gets triggered for metadata read in
btrfs_page_set_uptodate() inside end_page_read().
[CAUSE]
There is still a small race window for metadata only, the race could
happen like this:
T1 | T2
------------------------------------+-----------------------------
end_bio_extent_readpage() |
|- btrfs_validate_metadata_buffer() |
| |- free_extent_buffer() |
| Still have 2 refs |
|- end_page_read() |
|- if (unlikely(PagePrivate()) |
| The page still has Private |
| | free_extent_buffer()
| | | Only one ref 1, will be
| | | released
| | |- detach_extent_buffer_page()
| | |- btrfs_detach_subpage()
|- btrfs_set_page_uptodate() |
The page no longer has Private|
>>> ASSERT() triggered <<< |
This race window is super small, thus pretty hard to hit, even with so
many runs of fstests.
But the race window is still there, we have to go another way to solve
it other than relying on random PagePrivate() check.
Data path is not affected, as it will lock the page before reading,
while unlocking the page after the last read has finished, thus no race
window.
[FIX]
This patch will fix the bug by repurposing btrfs_subpage::readers.
Now btrfs_subpage::readers will be a member shared by both metadata and
data.
For metadata path, we don't do the page unlock as metadata only relies
on extent locking.
At the same time, teach page_range_has_eb() to take
btrfs_subpage::readers into consideration.
So that even if the last eb of a page gets freed, page::private won't be
detached as long as there still are pending end_page_read() calls.
By this we eliminate the race window, this will slight increase the
metadata memory usage, as the page may not be released as frequently as
usual. But it should not be a big deal.
The code got introduced in ("btrfs: submit read time repair only for
each corrupted sector"), but the fix is in a separate patch to keep the
problem description and the crash is rare so it should not hurt
bisectability.
Signed-off-by: Qu Wegruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
__extent_writepage_io() function originally just iterates through all
the extent maps of a page, and submits any regular extents.
This is fine for sectorsize == PAGE_SIZE case, as if a page is dirty, we
need to submit the only sector contained in the page.
But for subpage case, one dirty page can contain several clean sectors
with at least one dirty sector.
If __extent_writepage_io() still submit all regular extent maps, it can
submit data which is already written to disk.
And since such already written data won't have corresponding ordered
extents, it will trigger a BUG_ON() in btrfs_csum_one_bio().
Change the behavior of __extent_writepage_io() by finding the first
dirty byte in the page, and only submit the dirty range other than the
full extent.
Since we're also here, also modify the following calls to be subpage
compatible:
- SetPageError()
- end_page_writeback()
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Function btrfs_set_range_writeback() currently just sets the page
writeback unconditionally.
Change it to call the subpage helper so that we can handle both cases
well.
Since the subpage helpers needs btrfs_fs_info, also change the parameter
to accept btrfs_inode.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When __process_pages_contig() gets called for
extent_clear_unlock_delalloc(), if we hit the locked page, only Private2
bit is updated, but dirty/writeback/error bits are all skipped.
There are several call sites that call extent_clear_unlock_delalloc()
with locked_page and PAGE_CLEAR_DIRTY/PAGE_SET_WRITEBACK/PAGE_END_WRITEBACK
- cow_file_range()
- run_delalloc_nocow()
- cow_file_range_async()
All for their error handling branches.
For those call sites, since we skip the locked page for
dirty/error/writeback bit update, the locked page will still have its
subpage dirty bit remaining.
Normally it's the call sites which locked the page to handle the locked
page, but it won't hurt if we also do the update.
Especially there are already other call sites doing the same thing by
manually passing NULL as locked_page.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This involves the following modification:
- Ordered extent creation
This is done in process_one_page(), now PAGE_SET_ORDERED will call
subpage helper to do the work.
- endio functions
This is done in btrfs_mark_ordered_io_finished().
- btrfs_invalidatepage()
- btrfs_cleanup_ordered_extents()
Use the subpage page helper, and add an extra branch to exit if the
locked page have covered the full range.
Now the usage of page Ordered flag for ordered extent accounting is fully
subpage compatible.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Introduce a new data inodes specific subpage member, writers, to record
how many sectors are under page lock for delalloc writing.
This member acts pretty much the same as readers, except it's only for
delalloc writes.
This is important for delalloc code to trace which page can really be
freed, as we have cases like run_delalloc_nocow() where we may exit
processing nocow range inside a page, but need to exit to do cow half
way.
In that case, we need a way to determine if we can really unlock a full
page.
With the new btrfs_subpage::writers, there is a new requirement:
- Page locked by process_one_page() must be unlocked by
process_one_page()
There are still tons of call sites manually lock and unlock a page,
without updating btrfs_subpage::writers.
So if we lock a page through process_one_page() then it must be
unlocked by process_one_page() to keep btrfs_subpage::writers
consistent.
This will be handled in next patch.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now in end_bio_extent_writepage(), the only subpage incompatible code is
the end_page_writeback().
Just call the subpage helpers.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
status
For __process_pages_contig() and process_one_page(), to handle subpage
we only need to pass bytenr in and call subpage helpers to handle
dirty/error/writeback status.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Just like read page, for subpage support we only require sector size
alignment.
So change the error message condition to only require sector alignment.
This should not affect existing code, as for regular sectorsize ==
PAGE_SIZE case, we are still requiring page alignment.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In __process_pages_contig() we update page status according to page_ops.
That update process is a bunch of 'if' branches, which lie inside
two loops, this makes it pretty hard to expand for later subpage
operations.
So this patch will extract these operations into its own function,
process_one_pages().
Also since we're refactoring __process_pages_contig(), also move the new
helper and __process_pages_contig() before the first caller of them, to
remove the forward declaration.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
As a preparation for incoming subpage support, we need bytenr passed to
__process_pages_contig() directly, not the current page index.
So change the parameter and all callers to pass bytenr in.
With the modification, here we need to replace the old @index_ret with
@processed_end for __process_pages_contig(), but this brings a small
problem.
Normally we follow the inclusive return value, meaning @processed_end
should be the last byte we processed.
If parameter @start is 0, and we failed to lock any page, then we would
return @processed_end as -1, causing more problems for
__unlock_for_delalloc().
So here for @processed_end, we use two different return value patterns.
If we have locked any page, @processed_end will be the last byte of
locked page.
Or it will be @start otherwise.
This change will impact lock_delalloc_pages(), so it needs to check
@processed_end to only unlock the range if we have locked any.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Inside btrfs we use Private2 page status to indicate we have an ordered
extent with pending IO for the sector.
But the page status name, Private2, tells us nothing about the bit
itself, so this patch will rename it to Ordered.
And with extra comment about the bit added, so reader who is still
uncertain about the page Ordered status, will find the comment pretty
easily.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is a pretty bad abuse of btrfs_writepage_endio_finish_ordered() in
end_compressed_bio_write().
It passes compressed pages to btrfs_writepage_endio_finish_ordered(),
which is only supposed to accept inode pages.
Thankfully the important info here is the inode, so let's pass
btrfs_inode directly into btrfs_writepage_endio_finish_ordered(), and
make @page parameter optional.
By this, end_compressed_bio_write() can happily pass page=NULL while
still getting everything done properly.
Also, to cooperate with such modification, replace @page parameter for
trace_btrfs_writepage_end_io_hook() with btrfs_inode.
Although this removes page_index info, the existing start/len should be
enough for most usage.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
For subpage metadata, we're reusing two functions for subpage metadata
write:
- end_bio_extent_buffer_writepage()
- write_one_eb()
But the truth is, for subpage we just call
end_bio_subpage_eb_writepage() without using any bit in
end_bio_extent_buffer_writepage().
For write_one_eb(), it's pretty similar, but with a small part of code
reused.
There is really no need to pollute the existing code path if we're not
really using most of them.
So this patch will do the following change to separate the subpage
metadata write path from regular write path by:
- Use end_bio_subpage_eb_writepage() directly as endio in
write_one_subpage_eb()
- Directly call write_one_subpage_eb() in submit_eb_subpage()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is a lot of code inside extent_io.c needs both "struct bio
**bio_ret" and "unsigned long prev_bio_flags", along with some
parameters like "unsigned long bio_flags".
Such strange parameters are here for bio assembly.
For example, we have such inode page layout:
0 4K 8K 12K
|<-- Extent A-->|<- EB->|
Then what we do is:
- Page [0, 4K)
*bio_ret = NULL
So we allocate a new bio to bio_ret,
Add page [0, 4K) to *bio_ret.
- Page [4K, 8K)
*bio_ret != NULL
We found this page is continuous to *bio_ret,
and if we're not at stripe boundary, we
add page [4K, 8K) to *bio_ret.
- Page [8K, 12K)
*bio_ret != NULL
But we found this page is not continuous, so
we submit *bio_ret, then allocate a new bio,
and add page [8K, 12K) to the new bio.
This means we need to record both the bio and its bio_flag, but we
record them manually using those strange parameter list, other than
encapsulating them into their own structure.
So this patch will introduce a new structure, btrfs_bio_ctrl, to record
both the bio, and its bio_flags.
Also, in above case, for all pages added to the bio, we need to check if
the new page crosses stripe boundary. This check itself can be time
consuming, and we don't really need to do that for each page.
This patch also integrates the stripe boundary check into btrfs_bio_ctrl.
When a new bio is allocated, the stripe and ordered extent boundary is
also calculated, so no matter how large the bio will be, we only
calculate the boundaries once, to save some CPU time.
The following functions/structures are affected:
- struct extent_page_data
Replace its bio pointer with structure btrfs_bio_ctrl (embedded
structure, not pointer)
- end_write_bio()
- flush_write_bio()
Just change how bio is fetched
- btrfs_bio_add_page()
Use pre-calculated boundaries instead of re-calculating them.
And use @bio_ctrl to replace @bio and @prev_bio_flags.
- calc_bio_boundaries()
New function
- submit_extent_page() callers
- btrfs_do_readpage() callers
- contiguous_readpages() callers
To Use @bio_ctrl to replace @bio and @prev_bio_flags, and how to grab
bio.
- btrfs_bio_fits_in_ordered_extent()
Removed, as now the ordered extent size limit is done at bio
allocation time, no need to check for each page range.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Move header offsetof() to the expression that calculates the address so
it's part of get_eb_offset_in_page where the 2nd parameter is the member
offset.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
To be able to construct a zone append bio we need to look up the
btrfs_device. The code doing the chunk map lookup to get the device is
present in btrfs_submit_compressed_write and submit_extent_page.
Factor out the lookup calls into a helper and use it in the submission
paths.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The io_failure_record::in_validation was introduced to handle failed bio
which cross several sectors. In such case, we still need to verify
which sectors are corrupted.
But since we've changed the way how we handle corrupted sectors, by only
submitting repair for each corrupted sector, there is no need for extra
validation any more.
This patch will cleanup all io_failure_record::in_validation related
code.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently btrfs_submit_read_repair() has some extra check on whether the
failed bio needs extra validation for repair. But we can avoid all
these extra mechanisms if we submit the repair for each sector.
By this, each read repair can be easily handled without the need to
verify which sector is corrupted.
This will also benefit subpage, as one subpage bvec can contain several
sectors, making the extra verification more complex.
So this patch will:
- Introduce repair_one_sector()
The main code submitting repair, which is more or less the same as old
btrfs_submit_read_repair().
But this time, it only repairs one sector.
- Make btrfs_submit_read_repair() to handle sectors differently
There are 3 different cases:
* Good sector
We need to release the page and extent, set the range uptodate.
* Bad sector and failed to submit repair bio
We need to release the page and extent, but not set the range
uptodate.
* Bad sector but repair bio submitted
The page and extent release will be handled by the submitted repair
bio. Nothing needs to be done.
Since btrfs_submit_read_repair() will handle the page and extent
release now, we need to skip to next bvec even we hit some error.
- Change the lifespan of @uptodate in end_bio_extent_readpage()
Since now btrfs_submit_read_repair() will handle the full bvec
which contains any corruption, we don't need to bother updating
@uptodate bit anymore.
Just let @uptodate to be local variable inside the main loop,
so that any error from one bvec won't affect later bvec.
- Only export btrfs_repair_one_sector(), unexport
btrfs_submit_read_repair()
The only outside caller for read repair is DIO, which already submits
its repair for just one sector.
Only export btrfs_repair_one_sector() for DIO.
This patch will focus on the change on the repair path, the extra
validation code is still kept as is, and will be cleaned up later.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
try_lock_extent() returns 1 on success or 0 for failure and not an error
code. If try_lock_extent() fails, read_extent_buffer_subpage() returns
zero indicating subpage extent read success.
Return EAGAIN/EWOULDBLOCK if try_lock_extent() fails in locking the
extent.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes:
- fix unaligned compressed writes in zoned mode
- fix false positive lockdep warning when cloning inline extent
- remove wrong BUG_ON in tree-log error handling"
* tag 'for-5.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: fix parallel compressed writes
btrfs: zoned: pass start block to btrfs_use_zone_append
btrfs: do not BUG_ON in link_to_fixup_dir
btrfs: release path before starting transaction when cloning inline extent
|
|
btrfs_use_zone_append only needs the passed in extent_map's block_start
member, so there's no need to pass in the full extent map.
This also enables the use of btrfs_use_zone_append in places where we only
have a start byte but no extent_map.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes:
- fix fiemap to print extents that could get misreported due to
internal extent splitting and logical merging for fiemap output
- fix RCU stalls during delayed iputs
- fix removed dentries still existing after log is synced"
* tag 'for-5.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix removed dentries still existing after log is synced
btrfs: return whole extents in fiemap
btrfs: avoid RCU stalls while running delayed iputs
btrfs: return 0 for dev_extent_hole_check_zoned hole_start in case of error
|
|
`xfs_io -c 'fiemap <off> <len>' <file>`
can give surprising results on btrfs that differ from xfs.
btrfs prints out extents trimmed to fit the user input. If the user's
fiemap request has an offset, then rather than returning each whole
extent which intersects that range, we also trim the start extent to not
have start < off.
Documentation in filesystems/fiemap.txt and the xfs_io man page suggests
that returning the whole extent is expected.
Some cases which all yield the same fiemap in xfs, but not btrfs:
dd if=/dev/zero of=$f bs=4k count=1
sudo xfs_io -c 'fiemap 0 1024' $f
0: [0..7]: 26624..26631
sudo xfs_io -c 'fiemap 2048 1024' $f
0: [4..7]: 26628..26631
sudo xfs_io -c 'fiemap 2048 4096' $f
0: [4..7]: 26628..26631
sudo xfs_io -c 'fiemap 3584 512' $f
0: [7..7]: 26631..26631
sudo xfs_io -c 'fiemap 4091 5' $f
0: [7..6]: 26631..26630
I believe this is a consequence of the logic for merging contiguous
extents represented by separate extent items. That logic needs to track
the last offset as it loops through the extent items, which happens to
pick up the start offset on the first iteration, and trim off the
beginning of the full extent. To fix it, start `off` at 0 rather than
`start` so that we keep the iteration/merging intact without cutting off
the start of the extent.
after the fix, all the above commands give:
0: [0..7]: 26624..26631
The merging logic is exercised by fstest generic/483, and I have written
a new fstest for checking we don't have backwards or zero-length fiemaps
for cases like those above.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are many places where kmap/memset/kunmap patterns occur.
Use the newly lifted memzero_page() to eliminate direct uses of kmap and
leverage the new core functions use of kmap_local_page().
The development of this patch was aided by the following coccinelle
script:
// <smpl>
// SPDX-License-Identifier: GPL-2.0-only
// Find kmap/memset/kunmap pattern and replace with memset*page calls
//
// NOTE: Offsets and other expressions may be more complex than what the script
// will automatically generate. Therefore a catchall rule is provided to find
// the pattern which then must be evaluated by hand.
//
// Confidence: Low
// Copyright: (C) 2021 Intel Corporation
// URL: http://coccinelle.lip6.fr/
// Comments:
// Options:
//
// Then the memset pattern
//
@ memset_rule1 @
expression page, V, L, Off;
identifier ptr;
type VP;
@@
(
-VP ptr = kmap(page);
|
-ptr = kmap(page);
|
-VP ptr = kmap_atomic(page);
|
-ptr = kmap_atomic(page);
)
<+...
(
-memset(ptr, 0, L);
+memzero_page(page, 0, L);
|
-memset(ptr + Off, 0, L);
+memzero_page(page, Off, L);
|
-memset(ptr, V, L);
+memset_page(page, V, 0, L);
|
-memset(ptr + Off, V, L);
+memset_page(page, V, Off, L);
)
...+>
(
-kunmap(page);
|
-kunmap_atomic(ptr);
)
// Remove any pointers left unused
@
depends on memset_rule1
@
identifier memset_rule1.ptr;
type VP, VP1;
@@
-VP ptr;
... when != ptr;
? VP1 ptr;
//
// Catch all
//
@ memset_rule2 @
expression page;
identifier ptr;
expression GenTo, GenSize, GenValue;
type VP;
@@
(
-VP ptr = kmap(page);
|
-ptr = kmap(page);
|
-VP ptr = kmap_atomic(page);
|
-ptr = kmap_atomic(page);
)
<+...
(
//
// Some call sites have complex expressions within the memset/memcpy
// The follow are catch alls which need to be evaluated by hand.
//
-memset(GenTo, 0, GenSize);
+memzero_pageExtra(page, GenTo, GenSize);
|
-memset(GenTo, GenValue, GenSize);
+memset_pageExtra(page, GenValue, GenTo, GenSize);
)
...+>
(
-kunmap(page);
|
-kunmap_atomic(ptr);
)
// Remove any pointers left unused
@
depends on memset_rule2
@
identifier memset_rule2.ptr;
type VP, VP1;
@@
-VP ptr;
... when != ptr;
? VP1 ptr;
// </smpl>
Link: https://lkml.kernel.org/r/20210309212137.2610186-4-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Btrfs uses internally mapped u64 address space for all its metadata.
Due to the page cache limit on 32bit systems, btrfs can't access
metadata at or beyond (ULONG_MAX + 1) << PAGE_SHIFT. See
how MAX_LFS_FILESIZE and page::index are defined. This is 16T for 4K
page size while 256T for 64K page size.
Users can have a filesystem which doesn't have metadata beyond the
boundary at mount time, but later balance can cause it to create
metadata beyond the boundary.
And modification to MM layer is unrealistic just for such minor use
case. We can't do more than to prevent mounting such filesystem or warn
early when the numbers are still within the limits.
To address such problem, this patch will introduce the following checks:
- Mount time rejection
This will reject any fs which has metadata chunk at or beyond the
boundary.
- Mount time early warning
If there is any metadata chunk beyond 5/8th of the boundary, we do an
early warning and hope the end user will see it.
- Runtime extent buffer rejection
If we're going to allocate an extent buffer at or beyond the boundary,
reject such request with EOVERFLOW.
This is definitely going to cause problems like transaction abort, but
we have no better ways.
- Runtime extent buffer early warning
If an extent buffer beyond 5/8th of the max file size is allocated, do
an early warning.
Above error/warning message will only be printed once for each fs to
reduce dmesg flood.
If the mount is rejected, the filesystem will be mountable only on a
64bit host.
Link: https://lore.kernel.org/linux-btrfs/1783f16d-7a28-80e6-4c32-fdf19b705ed0@gmx.com/
Reported-by: Erik Jensen <erikjensen@rkjnsn.net>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The new function, submit_eb_subpage(), will submit all the dirty extent
buffers in the page.
The major difference between submit_eb_page() and submit_eb_subpage()
is:
- How to grab extent buffer
Now we use find_extent_buffer_nospinlock() other than using
page::private.
All other different handling is already done in functions like
lock_extent_buffer_for_io() and write_one_eb().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
For subpage metadata, we don't use page locking at all. So just skip
the page locking part for subpage. The rest of the function can be
reused.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The new function, write_one_subpage_eb(), as a subroutine for subpage
metadata write, will handle the extent buffer bio submission.
The major differences between the new write_one_subpage_eb() and
write_one_eb() is:
- No page locking
When entering write_one_subpage_eb() the page is no longer locked.
We only lock the page for its status update, and unlock immediately.
Now we completely rely on extent io tree locking.
- Extra bitmap update along with page status update
Now page dirty and writeback is controlled by
btrfs_subpage::dirty_bitmap and btrfs_subpage::writeback_bitmap.
They both follow the schema that any sector is dirty/writeback, then
the full page gets dirty/writeback.
- When to update the nr_written number
Now we take a shortcut, if we have cleared the last dirty bit of the
page, we update nr_written.
This is not completely perfect, but should emulate the old behavior
well enough.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The new function, end_bio_subpage_eb_writepage(), will handle the
metadata writeback endio.
The major differences involved are:
- How to grab extent buffer
Now page::private is a pointer to btrfs_subpage, we can no longer grab
extent buffer directly.
Thus we need to use the bv_offset to locate the extent buffer manually
and iterate through the whole range.
- Use btrfs_subpage_end_writeback() caller
This helper will handle the subpage writeback for us.
Since this function is executed under endio context, when grabbing
extent buffers it can't grab eb->refs_lock as that lock is not designed
to be grabbed under hardirq context.
So here introduce a helper, find_extent_buffer_nolock(), for such
situation, and convert find_extent_buffer() to use that helper.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Implement readahead_batch_length() to determine the number of bytes in
the current batch of readahead pages and use it in btrfs. Also use the
readahead_pos to get the offset.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Current set_btree_ioerr() only accepts @page parameter and grabs extent
buffer from page::private. This works fine for sector size == PAGE_SIZE
case, but not for subpage case.
Add an extra parameter, @eb, for callers to pass extent buffer to this
function, so that subpage code can reuse this function.
And also add subpage special handling to update
btrfs_subpage::error_bitmap.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
For set_extent_buffer_dirty() to support subpage sized metadata, just
call btrfs_page_set_dirty() to handle both cases.
For clear_extent_buffer_dirty(), it needs to clear the page dirty if and
only if all extent buffers in the page range are no longer dirty.
Also do the same for page error.
This is pretty different from the existing clear_extent_buffer_dirty()
routine, so add a new helper function,
clear_subpage_extent_buffer_dirty() to do this for subpage metadata.
Also since the main part of clearing page dirty code is still the same,
extract that into btree_clear_page_dirty() so that it can be utilized
for both cases.
But there is a special race between set_extent_buffer_dirty() and
clear_extent_buffer_dirty(), where we can clear the page dirty.
[POSSIBLE RACE WINDOW]
For the race window between clear_subpage_extent_buffer_dirty() and
set_extent_buffer_dirty(), due to the fact that we can't call
clear_page_dirty_for_io() under subpage spin lock, we can race like
below:
T1 (eb1 in the same page) | T2 (eb2 in the same page)
-------------------------------+------------------------------
set_extent_buffer_dirty() | clear_extent_buffer_dirty()
|- was_dirty = false; | |- clear_subpagE_extent_buffer_dirty()
| | |- btrfs_clear_and_test_dirty()
| | | Since eb2 is the last dirty page
| | | we got:
| | | last == true;
| | |
|- btrfs_page_set_dirty() | |
| We set the page dirty and | |
| subpage dirty bitmap | |
| | |- if (last)
| | | Since we don't have subpage lock
| | | held, now @last is no longer
| | | correct
| | |- btree_clear_page_dirty()
| | Now PageDirty == false, even if
| | we have dirty_bitmap not zero.
|- ASSERT(PageDirty()); |
^^^^ CRASH
The solution here is to also lock the eb->pages[0] for subpage case of
set_extent_buffer_dirty(), to prevent racing with
clear_extent_buffer_dirty().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are quite some assert checks on page uptodate in extent buffer
write accessors. They ensure the destination page is already uptodate.
This is fine for regular sector size case, but not for subpage case, as
for subpage we only mark the page uptodate if the page contains no hole
and all its extent buffers are uptodate.
So instead of checking PageUptodate(), for subpage case we check the
uptodate bitmap of btrfs_subpage structure.
To make the check more elegant, introduce a helper,
assert_eb_page_uptodate() to do the check for both subpage and regular
sector size cases.
The following functions are involved:
- write_extent_buffer_chunk_tree_uuid()
- write_extent_buffer_fsid()
- write_extent_buffer()
- memzero_extent_buffer()
- copy_extent_buffer()
- extent_buffer_test_bit()
- extent_buffer_bitmap_set()
- extent_buffer_bitmap_clear()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In alloc_extent_buffer(), we make sure that the newly allocated page is
never dirty.
This is fine for sector size == PAGE_SIZE case, but for subpage it's
possible that one extent buffer in the page is dirty, thus the whole
page is marked dirty, and could cause false alert.
To support subpage, call btrfs_page_test_dirty() to handle both cases.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The in_range() macro is defined twice in btrfs' source, once in ctree.h
and once in misc.h.
Remove the definition in ctree.h and include misc.h in the files depending
on it.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The parameter mirror is not used and does not make sense for checksum
verification of the given bio.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"There are still regressions being found and fixed in the zoned mode
and subpage code, the rest are fixes for bugs reported by users.
Regressions:
- subpage block support:
- readahead works on the proper block size
- fix last page zeroing
- zoned mode:
- linked list corruption for tree log
Fixes:
- qgroup leak after falloc failure
- tree mod log and backref resolving:
- extent buffer cloning race when resolving backrefs
- pin deleted leaves with active tree mod log users
- drop debugging flag from slab cache"
* tag 'for-5.12-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: always pin deleted leaves when there are active tree mod log users
btrfs: fix race when cloning extent buffer during rewind of an old root
btrfs: fix slab cache flags for free space tree bitmap
btrfs: subpage: make readahead work properly
btrfs: subpage: fix wild pointer access during metadata read failure
btrfs: zoned: fix linked list corruption after log root tree allocation failure
btrfs: fix qgroup data rsv leak caused by falloc failure
btrfs: track qgroup released data in own variable in insert_prealloc_file_extent
btrfs: fix wrong offset to zero out range beyond i_size
|
|
[BUG]
When running fstests for btrfs subpage read-write test, it has a very
high chance to crash at generic/475 with the following stack:
BTRFS warning (device dm-8): direct IO failed ino 510 rw 1,34817 sector 0xcdf0 len 94208 err no 10
Unable to handle kernel paging request at virtual address ffff80001157e7c0
CPU: 2 PID: 687125 Comm: kworker/u12:4 Tainted: G WC 5.12.0-rc2-custom+ #5
Hardware name: Khadas VIM3 (DT)
Workqueue: btrfs-endio-meta btrfs_work_helper [btrfs]
pc : queued_spin_lock_slowpath+0x1a0/0x390
lr : do_raw_spin_lock+0xc4/0x11c
Call trace:
queued_spin_lock_slowpath+0x1a0/0x390
_raw_spin_lock+0x68/0x84
btree_readahead_hook+0x38/0xc0 [btrfs]
end_bio_extent_readpage+0x504/0x5f4 [btrfs]
bio_endio+0x170/0x1a4
end_workqueue_fn+0x3c/0x60 [btrfs]
btrfs_work_helper+0x1b0/0x1b4 [btrfs]
process_one_work+0x22c/0x430
worker_thread+0x70/0x3a0
kthread+0x13c/0x140
ret_from_fork+0x10/0x30
Code: 910020e0 8b0200c2 f861d884 aa0203e1 (f8246827)
[CAUSE]
In end_bio_extent_readpage(), if we hit an error during read, we will
handle the error differently for data and metadata.
For data we queue a repair, while for metadata, we record the error and
let the caller choose what to do.
But the code is still using page->private to grab extent buffer, which
no longer points to extent buffer for subpage metadata pages.
Thus this wild pointer access leads to above crash.
[FIX]
Introduce a helper, find_extent_buffer_readpage(), to grab extent
buffer.
The difference against find_extent_buffer_nospinlock() is:
- Also handles regular sectorsize == PAGE_SIZE case
- No extent buffer refs increase/decrease
As extent buffer under IO must have non-zero refs, so this is safe
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
