| Age | Commit message (Collapse) | Author |
|---|
|
- __bch2_bkey_drop_ptr() -> bch2_bkey_drop_ptr_noerror(), now available
outside extents.
- Split bch2_bkey_has_device() and bch2_bkey_has_device_c(), const and
non const versions
- bch2_extent_has_ptr() now returns the pointer it found
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
There's no reason to erasure code cached pointers: we'll always have
another copy, and it'll be cheaper to read the other copy than do a
reconstruct read. And erasure coded cached pointers would add
complications that we'd rather not have to deal with, so let's make sure
to disallow them.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds support for nocow mode, where we do writes in-place when
possible. Patch components:
- New boolean filesystem and inode option, nocow: note that when nocow
is enabled, data checksumming and compression are implicitly disabled
- To prevent in-place writes from racing with data moves
(data_update.c) or bucket reuse (i.e. a bucket being reused and
re-allocated while a nocow write is in flight, we have a new locking
mechanism.
Buckets can be locked for either data update or data move, using a
fixed size hash table of two_state_shared locks. We don't have any
chaining, meaning updates and moves to different buckets that hash to
the same lock will wait unnecessarily - we'll want to watch for this
becoming an issue.
- The allocator path also needs to check for in-place writes in flight
to a given bucket before giving it out: thus we add another counter
to bucket_alloc_state so we can track this.
- Fsync now may need to issue cache flushes to block devices instead of
flushing the journal. We add a device bitmask to bch_inode_info,
ei_devs_need_flush, which tracks devices that need to have flushes
issued - note that this will lead to unnecessary flushes when other
codepaths have already issued flushes, we may want to replace this with
a sequence number.
- New nocow write path: look up extents, and if they're writable write
to them - otherwise fall back to the normal COW write path.
XXX: switch to sequence numbers instead of bitmask for devs needing
journal flush
XXX: ei_quota_lock being a mutex means bch2_nocow_write_done() needs to
run in process context - see if we can improve this
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
- bch2_extent_merge checks unwritten bit
- read path returns 0s for unwritten extents without actually reading
- reflink path skips over unwritten extents
- bch2_bkey_ptrs_invalid() checks for extents with both written and
unwritten extents, and non-normal extents (stripes, btree ptrs) with
unwritten ptrs
- fiemap checks for unwritten extents and returns
FIEMAP_EXTENT_UNWRITTEN
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Provide inline versions of some allocation functions
- bch2_alloc_sectors_done_inlined()
- bch2_alloc_sectors_append_ptrs_inlined()
and use them in the core IO path.
Also, inline bch2_extent_update_i_size_sectors() and
bch2_bkey_append_ptr().
In the core write path, function call overhead matters - every function
call is a jump to a new location and a potential cache miss.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We shouldn't be overloading standard error codes now that we have
provisions for bcachefs-specific errorcodes: this patch converts super.c
and super-io.c to per error site errcodes, with a bit of cleanup.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This patch introduces
- bpos_eq()
- bpos_lt()
- bpos_le()
- bpos_gt()
- bpos_ge()
and equivalent replacements for bkey_cmp().
Looking at the generated assembly these could probably be improved
further, but we already see a significant code size improvement with
this patch.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
checkpatch.pl gives lots of warnings that we don't want - suggested
ignore list:
ASSIGN_IN_IF
UNSPECIFIED_INT - bcachefs coding style prefers single token type names
NEW_TYPEDEFS - typedefs are occasionally good
FUNCTION_ARGUMENTS - we prefer to look at functions in .c files
(hopefully with docbook documentation), not .h
file prototypes
MULTISTATEMENT_MACRO_USE_DO_WHILE
- we have _many_ x-macros and other macros where
we can't do this
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This patch significantly cleans up and simplifies the data_update
interface. Instead of only being able to specify a single pointer by
device to rewrite, we're now able to specify any or all of the pointers
in the original extent to be rewrited, as a bitmask.
data_cmd is no more: the various pred functions now just return true if
the extent should be moved/updated. All the data_update path does is
rewrite existing replicas, or add new ones.
This fixes a bug where with background compression on replicated
filesystems, where rebalance -> data_update would incorrectly drop the
wrong old replica, and keep trying to recompress an extent pointer and
each time failing to drop the right replica. Oops.
Now, the data update path doesn't look at the io options to decide which
pointers to keep and which to drop - it only goes off of the
data_update_options passed to it.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
We have a hardcoded maximum on number of pointers in an extent that's
used by some other data structures - notably bch_devs_list - but we
weren't actually checking for it. Oops.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This converts bcachefs to the modern printbuf interface/implementation,
synced with the version to be submitted upstream.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When merging extents, we have to check that we won't overflow size
fields in any CRC entries - but the check for this was wrong, because in
the loop it was in we weren't keeping a pointer to the (packed, encoded)
CRC field.
Fix this by moving it to its own loop.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This adds a new parameter to .key_invalid() methods for whether the key
is being read or written; the idea being that methods can do more
aggressive checks when a key is newly created and being written, when we
wouldn't want to delete the key because of those checks.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
Print bucket:offset when the filesystem is online; this makes debugging
easier when correlating with alloc updates.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This patch improves the superblock .to_text() methods and adds methods
for all types that were missing them. It also improves printbufs by
allowing them to specfiy what units we want to be printing in, and adds
new wrapper methods for unifying our kernel and userspace environments.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
It'll now be handled at format time and in sysfs like other options - it
still can only be set at format time, though.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This adds flags for options that must be a power of two (block size and
btree node size), and options that are stored in the superblock as a
power of two (encoded extent max).
Also: options are now stored in memory in the same units they're
displayed in (bytes): we now convert when getting and setting from the
superblock.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This patch converts more enums in the on disk format to our standard
x-macro-with-strings deal - to enable better pretty-printing.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
When force-removing a device, we were silently dropping extents that we
no longer had pointers for - we should have been switching them to
KEY_TYPE_error, so that reads for data that was lost return errors.
This patch adds the logic for switching a key to KEY_TYPE_error to
bch2_bkey_drop_ptr(), and improves the logic somewhat.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
To implement snapshots, we need every filesystem btree operation (every
btree operation without a subvolume) to start by looking up the
subvolume and getting the current snapshot ID, with
bch2_subvolume_get_snapshot() - then, that snapshot ID is used for doing
btree lookups in BTREE_ITER_FILTER_SNAPSHOTS mode.
This patch adds those bch2_subvolume_get_snapshot() calls, and also
switches to passing around a subvol_inum instead of just an inode
number.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This splits btree_iter into two components: btree_iter is now the
externally visible componont, and it points to a btree_path which is now
reference counted.
This means we no longer have to clone iterators up front if they might
be mutated - btree_path can be shared by multiple iterators, and cloned
if an iterator would mutate a shared btree_path. This will help us use
iterators more efficiently, as well as slimming down the main long lived
state in btree_trans, and significantly cleans up the logic for iterator
lifetimes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We should always print out the full btree node ptr.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
Previously, checksummed extents could only be merged when the checksum
covered only the currently live data.
xfstest generic/064 creates a test file, then uses finsert calls to
split the extent, then collapse calls to see if they get merged. But
without any reads to trigger the narrow_crcs path, each of the split
extents will still have a checksum for the entire original extent.
This patch improves the extent merge path so that if either of the
extents we're attempting to merge has a checksum that covers the entire
merged extent, we just use that checksum.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This patch simplifies the key merging code by getting rid of partial
merges - it's simpler and saner if we just don't merge extents when
they'd overflow k->size.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This patch starts treating the bpos.snapshot field like part of the key
in the btree code:
* bpos_successor() and bpos_predecessor() now include the snapshot field
* Keys in btrees that will be using snapshots (extents, inodes, dirents
and xattrs) now always have their snapshot field set to U32_MAX
The btree iterator code gets a new flag, BTREE_ITER_ALL_SNAPSHOTS, that
determines whether we're iterating over keys in all snapshots or not -
internally, this controlls whether bkey_(successor|predecessor)
increment/decrement the snapshot field, or only the higher bits of the
key.
We add a new member to struct btree_iter, iter->snapshot: when
BTREE_ITER_ALL_SNAPSHOTS is not set, iter->pos.snapshot should always
equal iter->snapshot, which will be 0 for btrees that don't use
snapshots, and alsways U32_MAX for btrees that will use snapshots
(until we enable snapshot creation).
This patch also introduces a new metadata version number, and compat
code for reading from/writing to older versions - this isn't a forced
upgrade (yet).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It was using the method for btree_ptr_v1, but that wasn't checking all
the fields.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This code used to be used for running some assertions on alloc info at
runtime, but it long predates fsck and hasn't been good for much in
ages - we can delete it now.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We keep running into occasional bugs with btree transaction iterators
overflowing - this will make those bugs more visible.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This patch standardizes all the enums that have associated string tables
(probably more enums should have string tables).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
KEY_TYPE_discard used to be used for extent whiteouts, but when handling
over overlapping extents was lifted above the core btree code it became
unused. This patch updates various code to reflect that.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
These are only complained about when building in userspace, for some
reason.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
More repair code, now that we can repair extents during initial gc.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This introduces a new version of KEY_TYPE_alloc, which uses the new
varint encoding introduced for inodes. This means we'll eventually be
able to support much larger bucket sizes (for SMR devices), and the
read/write time fields are expanded to 64 bits - which will be used in
the next patch to get rid of the periodic rescaling of those fields.
Also, for buckets that are members of erasure coded stripes, this adds
persistent fields for the index of the stripe they're members of and the
stripe redundancy. This is part of work to get rid of having to scan and
read into memory the alloc and stripes btrees at mount time.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This is so that when we discover btree topology issues, we can just
update the pointer to a btree node and signal btree read path that the
min/max keys in the node header should be updated from the node pointer.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Originally, we'd check for -ENOSPC when getting a disk reservation
whenever the new extent took up more space on disk than the old extent.
Erasure coding screwed this up, because with erasure coding writes are
initially replicated, and then in the background the extra replicas are
dropped when the stripe is created. This means that with erasure coding
enabled, writes will always take up more space on disk than the data
they're overwriting - but, according to posix, overwrites aren't
supposed to return ENOSPC.
So, in this patch we fudge things: if the new extent has more replicas
than the _effective_ replicas of the old extent, or if the old extent is
compressed and the new one isn't, we check for ENOSPC when getting the
disk reservation - otherwise, we don't.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This is something we clearly should be checking for, but weren't -
oops.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It's not used much anymore, the module paramter interface is better.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When inline data extents were added, reflink was forgotten about - we
need indirect inline data extents for reflink + inline data to work
correctly.
This patch adds them, and a new feature bit that's flipped when they're
used.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Awhile back the mechanism for garbage collecting unused replicas entries
was significantly improved, but some cleanup was missed - this patch
does that now.
This is also prep work for a patch to account for erasure coded parity
blocks separately - we need to consolidate the logic for
checking/marking the various replicas entries from one bkey into a
single function.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This also consolidates the various checks in bch2_mark_pointer() and
bch2_trans_mark_pointer().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
