summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-09-06usb: gadget: dummy_hcd: fixup error probe pathSebastian Andrzej Siewior
If USB2 host controller probes fine but USB3 does not then we don't remove the USB controller properly and lock up the system while the HUB code will try to enumerate the USB2 controller and access memory which is no longer available in case the dummy_hcd was compiled as a module. This is a problem since 448b6eb1 ("USB: Make sure to fetch the BOS desc for roothubs.) if used in USB3 mode because dummy does not provide this descriptor and explodes later. Cc: stable@vger.kernel.org # v3.5 Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: gadget: s3c-hsotg.c: fix error return codeJulia Lawall
Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: dwc3: ep0: correct cache sync issue in case of ep0_bouncedPratyush Anand
In case of ep0 out, if length is not aligned to maxpacket size then we use dwc->ep_bounce_addr for dma transfer and not request->dma. Since, we have alreday done memcpy from dwc->ep0_bounce to request->buf, so we do not need to issue cache sync function. In fact, cache sync function will bring wrong data in request->buf from request->dma in this scenario. So, cache sync function must not be executed in case of ep0 bounced. Cc: <stable@vger.kernel.org> # v3.4 v3.5 Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: gadget: add multiple definition guardsAndrzej Pietrasiewicz
If f_fs.c and u_serial.c are combined together using #include, which has been a common practice so far, the pr_vdebug macro is defined multiple times. Define it only once. Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06tty: uartclk value from serial_core exposed to sysfsTomas Hlavacek
Added file /sys/devices/.../tty/ttySX/uartclk to allow reading uartclk value in struct uart_port in serial_core via sysfs. tty_register_device() has been generalized and refactored in order to add support for setting drvdata and attribute_group to the device. Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: serial_core.h needs console.h included firstStephen Rothwell
Fixes these build errors: In file included from drivers/tty/serial/sccnxp.c:20:0: include/linux/serial_core.h: In function 'uart_handle_break': include/linux/serial_core.h:543:30: error: dereferencing pointer to incomplete type Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: mxs-auart: put the device in mxs_auart_probe()Huang Shijie
We call the get_device() in the mxs_auart_probe(). For the balance of the reference count, we should put the device in the mxs_auart_remove(). Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: mxs-auart: fix the wrong setting orderHuang Shijie
After set the AUART_CTRL0_CLKGATE, the UART will gate all the clocks off. So the following line will not take effect. ................................................................ writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN, u->membase + AUART_INTR_CLR); ................................................................ To fix this issue, the patch moves this gate-off line to the end of setting registers. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial_core: fix sizeof(pointer)Fengguang Wu
sizeof when applied to a pointer typed expression gives the size of the pointer. Generated by: scripts/coccinelle/misc/noderef.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: enable RX and TX FIFO usageFelipe Balbi
enable RX FIFO for 16 characters and TX FIFO for 16 spaces. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: move uart_omap_port definition to C fileFelipe Balbi
nobody needs to access the uart_omap_port structure other than omap-serial.c file. Let's move that structure definition to the C source file in order to prevent anyone from accessing our structure. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: remove unnecessary header and add a missing oneFelipe Balbi
this driver doesn't use any from <plat/dmtimer.h>, so we can remove it without any problems. This will, however cause a problem because omap-serial.c was relying on indirect inclusion of <linux/platform_device.h>, let's fix the issue by including <linux/platform_device.h> on omap-serial.c as it should be. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: fix software flow controlVikram Pandita
Software flow control register bits were not defined correctly. Also clarify the IXON and IXOFF logic to reflect what userspace wants. Cc: stable@vger.kernel.org Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: make sure to put() on poll_get_charFelipe Balbi
if we would reach serial_omap_get_char() while Data Ready bit isn't set, we would return from it without kicking our pm timer. This would mean we would, eventually, have an unbalanced pm_runtime_get on our device which would prevent it from ever sleeping again. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: implement set_wakeFelipe Balbi
This has been missing from OMAP UART driver for quite a while and it's simple enough to implement it. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: unlock the port lockRuchika Kharwar
This patch unlocks the port lock before calling a serial_core API and re-acquires the port lock after calling it. This patch fixes a system freeze issue seen when the serial_core API uart_write_wakeup() eventually attempts to acquire the port lock already acquired by omap serial interrupt handler. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Ruchika Kharwar <ruchika@ti.com> Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Vijay Badawadagi <bvijay@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: drop "inline" from IRQ handler prototypeFelipe Balbi
it makes no sense to mark our IRQ handler inline since it's passed as a function pointer when enabling the IRQ line. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: optimization with section annotationsFelipe Balbi
Two functions: omap_serial_fill_features_erratas() and of_get_uart_port_info() are only called from probe(). Marking them as __devinit gives us another oportunity to free some code after .init.text is done. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Ruchika Kharwar <ruchika@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: fix sequence of pm_runtime_* calls.Ruchika Kharwar
pm_runtime_enable() needs to be invoked before pm_runtime_use_autosuspend(), and pm_runtime_set_autosuspend_delay() functions. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ruchika Kharwar <ruchika@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: don't save IRQ flags on hardirqFelipe Balbi
When we're running our hardirq handler, there's not need to disable IRQs with spin_lock_irqsave() because IRQs are already disabled. It also makes no difference if we save or not IRQ flags. Switch over to simple spin_lock/spin_unlock and drop the "flags" variable. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: make sure to suspend device before removeFelipe Balbi
before removing the driver, let's make sure to force device into a suspended state in order to conserve power. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: drop unnecessary check from removeFelipe Balbi
if platform_get_drvdata() returns NULL, that's quite a nasty bug on the driver which we want to catch ASAP. Otherwise, that check is hugely unneeded. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: set dev->drvdata before enabling pm_runtimeFelipe Balbi
by the time we call our first pm_runtme_get_sync() after enable pm_runtime, our resume method might be called. To avoid problems, we must make sure that our dev->drvdata is set correctly before our resume method gets called. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: stick to put_autosuspendFelipe Balbi
Everytime we're done using our TTY, we want the pm timer to be reinitilized. By sticking to pm_runtime_pm_autosuspend() we make sure that this will always be the case. The idea behind this patch is to make sure we will always reinitialize the pm timer so that we don't fall into a situation where pm_runtime_put() expires right away (if timer was already about to expire when we made the call to pm_runtime_put()). While suspending right away wouldn't cause any issues, reinitializing the pm timer can help us avoiding unnecessary context save & restore operations (which are somewhat expensive) if there's another read/write/set_termios request coming right after. IOW, we are trying to make sure UART is still powered up while it's still under heavy usage. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: move THRE check to transmit_chars()Felipe Balbi
since all other IRQ types now do all necessary checks inside their handlers, transmit_chars() was the only one left expecting serial_omap_irq() to check THRE for it. We can move THRE check to transmit_chars() in order to make serial_omap_irq() more uniform. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: refactor receive_chars() into rdi/rlsi handlersFelipe Balbi
receive_chars() was getting too big and too difficult to follow. By splitting it into separate RDI and RSLI handlers, we have smaller functions which are easy to understand and only touch the pieces which they need to touch. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: simplify IRQ handlingFelipe Balbi
quite a few changes here, though they are pretty obvious. In summary we're making sure to detect which interrupt type we need to handle before calling the underlying interrupt handling procedure. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: drop DMA supportFelipe Balbi
The current support is known to be broken and a later patch will come re-adding it using dma engine API. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: don't access the platform_deviceFelipe Balbi
The driver doesn't need to know about its platform_device. Everything the driver needs can be done through the struct device pointer. In case we need to use the OMAP-specific PM function pointers, those can make sure to find the device's platform_device pointer so they can find the struct omap_device through pdev->archdata field. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06xen/pciback: Fix proper FLR steps.Konrad Rzeszutek Wilk
When we do FLR and save PCI config we did it in the wrong order. The end result was that if a PCI device was unbind from its driver, then binded to xen-pciback, and then back to its driver we would get: > lspci -s 04:00.0 04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection 13:42:12 # 4 :~/ > echo "0000:04:00.0" > /sys/bus/pci/drivers/pciback/unbind > modprobe e1000e e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k e1000e: Copyright(c) 1999 - 2012 Intel Corporation. e1000e 0000:04:00.0: Disabling ASPM L0s L1 e1000e 0000:04:00.0: enabling device (0000 -> 0002) xen: registering gsi 48 triggering 0 polarity 1 Already setup the GSI :48 e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode e1000e: probe of 0000:04:00.0 failed with error -2 This fixes it by first saving the PCI configuration space, then doing the FLR. Reported-by: Ren, Yongjie <yongjie.ren@intel.com> Reported-and-Tested-by: Tobias Geiger <tobias.geiger@vido.info> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: stable@vger.kernel.org
2012-09-05Merge tag 'mmc-fixes-for-3.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC fixes from Chris Ball: - a firmware bug on several Samsung MoviNAND eMMC models causes permanent corruption on the device when secure erase and secure trim requests are made, so we disable those requests on these eMMC devices. - atmel-mci: fix a hang with some SD cards by waiting for not-busy flag. - dw_mmc: low-power mode breaks SDIO interrupts; fix PIO error handling; fix handling of error interrupts. - mxs-mmc: fix deadlocks; fix compile error due to dma.h arch change. - omap: fix broken PIO mode causing memory corruption. - sdhci-esdhc: fix card detection. * tag 'mmc-fixes-for-3.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: omap: fix broken PIO mode mmc: card: Skip secure erase on MoviNAND; causes unrecoverable corruption. mmc: dw_mmc: Disable low power mode if SDIO interrupts are used mmc: dw_mmc: fix error handling in PIO mode mmc: dw_mmc: correct mishandling error interrupt mmc: dw_mmc: amend using error interrupt status mmc: atmel-mci: not busy flag has also to be used for read operations mmc: sdhci-esdhc: break out early if clock is 0 mmc: mxs-mmc: fix deadlock caused by recursion loop mmc: mxs-mmc: fix deadlock in SDIO IRQ case mmc: bfin_sdh: fix dma_desc_array build error
2012-09-05dj: memory scribble in logi_djAlan Cox
Allocate a structure not a pointer to it ! Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-05Merge tag 'gpio-fixes-for-v3.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "These are some GPIO regression fixes for v3.6: - Erroneous debug message from of_get_named_gpio_flags() - Make sure the MC9S08DZ60 GPIO driver depend on I2C being compiled in (not module) or allmodconfig breaks. - Check return value from irq_alloc_descs() in the Emma Mobile GPIO driver. - Assign the owner field for the rdc321x driver so the module won't be removed if it has active GPIOs." * tag 'gpio-fixes-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: rdc321x: Prevent removal of modules exporting active GPIOs gpio: em: Fix checking return value of irq_alloc_descs gpio: mc9s08dz60: Fix build error if I2C=m gpio: Fix debug message in of_get_named_gpio_flags()
2012-09-05Merge tag 'fbdev-fixes-for-3.6-1' of git://github.com/schandinat/linux-2.6Linus Torvalds
Pull fbdev fixes from Florian Tobias Schandinat: - a fix by Paul Cercueil to prevent a possible buffer overflow - a fix by Bruno Prémont to prevent a rare sleep in invalid context - a fix by Julia Lawall for a double free in auo_k190x - a fix by Dan Carpenter to prevent a division by zero in mb862xxfb - a regression fix by Tomi Valkeinen for the SDI output in OMAP - a fix by Grazvydas Ignotas to fix the console colors in OMAP * tag 'fbdev-fixes-for-3.6-1' of git://github.com/schandinat/linux-2.6: OMAPFB: fix framebuffer console colors OMAPDSS: Fix SDI PLL locking video: mb862xxfb: prevent divide by zero bug drivers/video/auo_k190x.c: drop kfree of devm_kzalloc's data fbcon: Fix bit_putcs() call to kmalloc(s, GFP_KERNEL) fbcon: prevent possible buffer overflow.
2012-09-05Merge tag 'upstream-3.6-rc5' of git://git.infradead.org/linux-ubiLinus Torvalds
Pull ubi fix from Artem Bityutskiy: "A single small fix for memory deallocation: we allocated memory using 'kmem_cache_alloc()' but were freeing it using 'kfree()' in some cases. Now we fix this by using 'kmem_cache_free()' instead." * tag 'upstream-3.6-rc5' of git://git.infradead.org/linux-ubi: UBI: fix a horrible memory deallocation bug
2012-09-05Merge tag 'for-usb-linus-2012-09-05' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus xHCI 3.6 bug fixes. Hi Greg, Here's seven bugfixes for 3.6. All of them are marked for stable, and most are vendor-specific fixes. Details: -------- - Commits 052c7f9 and 2963657 fix a couple stupid mistakes I made in a Intel xHCI bug fix patch I pushed just before I left for vacation. - Commits 29d2145 and a96874a fix issues with the Intel Panther Point EHCI to xHCI port switchover. - Commit 71c731a adds the work-around for the TI redriver "dead port" issue. - Commit 319acdf adds a fix for non-PCI xHCI platform drivers. - Commit e955a1c works around the UEFI issue with the xHCI host sometimes returning 0xff's in the MMIO on boot. Sarah Sharp
2012-09-05target: fix use-after-free with PSCSI sense dataPaolo Bonzini
The pointer to the sense buffer is fetched by transport_get_sense_data, but this is called by target_complete_ok_work long after pscsi_req_done has freed the struct that contains it. Pass instead the fabric's sense buffer to transport_complete, and copy the data to it directly in transport_complete. Setting SCF_TRANSPORT_TASK_SENSE also becomes a duty of transport_complete. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-05target: simplify code around transport_get_sense_dataPaolo Bonzini
The error conditions in transport_get_sense_data are superfluous and complicate the code unnecessarily: * SCF_TRANSPORT_TASK_SENSE is checked in the caller; * it's simply part of the invariants of dev->transport->get_sense_buffer that it must be there if transport_complete ever returns 1, and that it must not return NULL. Besides, the entire callback will disappear with the next patch. * similarly in the caller we can expect that sense data is only sent for non-zero cmd->scsi_status. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-05target: move transport_get_sense_dataPaolo Bonzini
We will be calling it from transport_complete_cmd, avoid forward declarations. No semantic change. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-05USB: add device quirk for Joss Optical touchboardAlan Stern
This patch (as1604) adds a CONFIG_INTF_STRINGS quirk for the Joss infrared touchboard device. The device doesn't like to be asked for its interface strings. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: adam ? <adam3337@wp.pl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05USB: ohci-at91: fix PIO handling in relation with number of portsNicolas Ferre
If the number of ports present on the SoC/board is not the maximum and that the platform data is not filled with all data, there is an easy way to mess the PIO setup for this interface. This quick fix addresses mis-configuration in USB host platform data that is common in at91 boards since commit 0ee6d1e (USB: ohci-at91: change maximum number of ports) that did not modified the associatd board files. Reported-by: Klaus Falkner <klaus.falkner@solectrix.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Stable <stable@vger.kernel.org> [3.4+] Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05USB: ftdi_sio: PID for NZR SEM 16+ USBHorst Schirmeier
This adds the USB PID for the NZR SEM 16+ USB energy monitor device <http://www.nzr.de>. It works perfectly with the GPL software on <http://schou.dk/linux/sparometer/>. Signed-off-by: Horst Schirmeier <horst@schirmeier.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05USB: ftdi-sio: add support for more Physik Instrumente devicesÉric Piel
Commit b69cc672052540 added support for the E-861. After acquiring a C-867, I realised that every Physik Instrumente's device has a different PID. They are listed in the Windows device driver's .inf file. So here are all PIDs for the current (and probably future) USB devices from Physik Instrumente. Compiled, but only actually tested on the E-861 and C-867. Signed-off-by: Éric Piel <piel@delmic.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-058250_pci: Add additional WCH CHC353 devicesAlan Cox
These were reported in bugzilla long ago with a hack patch. Now we have a proper patch for one we can do the rest. Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=25102 Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05parport: fix possible memory leak in parport_gsc_probe_port()Wei Yongjun
ops has been allocated in this function and should be freed before leaving from the error handling cases. spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05ibmveth: Fix alignment of rx queue bugSantiago Leon
This patch fixes a bug found by Nish Aravamudan (https://lkml.org/lkml/2012/5/15/220) where the driver is not following the spec (it is not aligning the rx buffer on a 16-byte boundary) and the hypervisor aborts the registration, making the device unusable. The fix follows BenH's recommendation (https://lkml.org/lkml/2012/7/20/461) to replace the kmalloc+map for a single call to dma_alloc_coherent() because that function always aligns to a 16-byte boundary. The stable trees will run into this bug whenever the rx buffer kmalloc call returns something not aligned on a 16-byte boundary. Cc: <stable@vger.kernel.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-06drm: use drm_compat_ioctl for 32-bit appsKeith Packard
Most of the DRM drivers appear to be missing the .compat_ioctl file operation entry necessary for 32-bit application compatibility. This patch uses drm_compat_ioctl for all drivers which don't have their own, and which are using drm_ioctl for .unlocked_ioctl. This leaves drivers/gpu/drm/psb/psb_drv.c unchanged; it has a custom .unlocked_ioctl and will presumably need a custom .compat_ioctl as well. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2012-09-05serial: add a new helper functionHuang Shijie
In most of the time, the driver needs to check if the cts flow control is enabled. But now, the driver checks the ASYNC_CTS_FLOW flag manually, which is not a grace way. So add a new wraper function to make the code tidy and clean. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05serial: omap: define helpers for pdata function pointersFelipe Balbi
this patch is in preparation to a few other changes which will align on the prototype for function pointers passed through pdata. It also helps cleaning up the driver a little by agregating checks for pdata in a single location. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05serial: omap: define and use to_uart_omap_port()Felipe Balbi
current code only works because struct uart_port is the first member on the uart_omap_port structure. If, for whatever reason, someone puts another member as the first of the structure, that cast won't work anymore. In order to be safe, let's use a container_of() which, for now, gets optimized into a cast anyway. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 17:18:42 +0000