| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"For this kernel cycle I managed an immutable branch for the PEF2256
WAN framer that has some pin control portions. It already landed in
your tree through the net pull request but here it is mentioned again.
The most interesting is perhaps the Samsung Exynos subdrivers for the
Tensor SoC used in Google Pixel 6 and the ExynosAuto subdriver for
automotive. Along with the earlier merged Tesla FSD subdriver it shows
some of the versatile uses of the Samsung Exynos silicon. It is also
used in the latest version of Axis Communications ARTPEC chips so it
is a very widely deployed SoC family.
We also have the Intel Meteor Lake SoC which I think is for laptops.
It's a pretty interesting chip with Xe graphics and integrated PCH.
Core changes:
- A new PINCTRL_GROUP_DESC() infrastructure macro is added and used
in different drivers, generic group description struct group_desc
is now used all over the place.
New drivers:
- New driver for the Texas Instruments TPS6494 Power Management IC.
- New driver for the Lantic PEF2256 framer pin multiplexer. This IC
has some pins that can be reconfigured in different ways. The
actual driver comes on an immutable branch with the net WAN parts,
the IC is some latest-and-greatest serial line funnel for e.g.
wireless access points.
- New subdriver for the Samsung Exynos Auto V920 pin controller, used
for automotive applications.
- New subdriver for the Samsung "GS101" SoC pin controller, this is
the Google "Tensor" SoC used in the Google Pixel 6.
- New subdriver for the Intel Meteor Point SoC pin controller.
- New subdriver for the Qualcomm SM8650 top level (TLMM) and LPASS
pin controllers.
- New subdriver for the Qualcomm X1E80100 top level (TLMM) pin
controller.
- New subdriver for the Qualcomm SM4450 top level (TLMM) pin
controller.
- The "single" pin controller now supports the Texas Instruments
J7200 SoC.
Improvements:
- Intel has created a new (Intel-)generic pin controller driver that
is now used by all contemporary Intel platforms.
- Intel is now also making use of some cleanup helpers.
- Enble 910 Ohm bias in the Intel Tangier driver.
- The Samsung driver now suppors irq_set_affinity() in it's IRQ chip
giving support for non wake up external gpio interrupts"
* tag 'pinctrl-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (112 commits)
pinctrl: samsung: constify iomem pointers
pinctrl: cy8c95x0: Cache muxed registers
dt-bindings: pinctrl: xilinx: Rename *gpio to *gpio-grp
pinctrl: qcom: lpass-lpi: remove duplicated include
dt-bindings: pinctrl: qcom: drop common properties and allow wakeup-parent
dt-bindings: pinctrl: qcom: drop common properties
dt-bindings: pinctrl: qcom,ipq5018-tlmm: use common TLMM bindings
dt-bindings: pinctrl: qcom,x1e80100-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,sm8650-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,sm8550-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,sdx75-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,sa8775p-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,qdu1000-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom: create common LPASS LPI schema
pinctrl: qcom: sm4450: dd SM4450 pinctrl driver
dt-bindings: pinctrl: qcom: Add SM4450 pinctrl
dt-bindings: pinctrl: qcom,pmic-mpp: clean up example
pinctrl: intel: Add Intel Meteor Point pin controller and GPIO support
pinctrl: renesas: rzg2l: Add input enable to the Ethernet pins
pinctrl: renesas: rzg2l: Add output enable support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Pull HSI update from Sebastian Reichel:
- modernize IDA API
* tag 'hsi-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: omap_ssi: Remove usage of the deprecated ida_simple_xx() API
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- add CMDQ support for mediatek mt8188
- mhuv2: fix channel window status
- qcom: document X1E80100 IPC controller and misc cleanup
- add Versal bindings to xlnx
- Convert to platform remove callback returning void
* tag 'mailbox-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (23 commits)
mailbox: mtk-cmdq: Add CMDQ driver support for mt8188
mailbox: mtk-cmdq: Sort cmdq platform data by compatible name
mailbox: mtk-cmdq: Rename gce_plat variable with SoC name postfix
dt-bindings: mailbox: qcom-ipcc: document the X1E80100 Inter-Processor Communication Controller
mailbox: zynqmp-ipi: Convert to platform remove callback returning void
mailbox: tegra-hsp: Convert to platform remove callback returning void
mailbox: sun6i-msgbox: Convert to platform remove callback returning void
mailbox: stm32-ipcc: Convert to platform remove callback returning void
mailbox: qcom-ipcc: Convert to platform remove callback returning void
mailbox: qcom-apcs-ipc: Convert to platform remove callback returning void
mailbox: omap: Convert to platform remove callback returning void
mailbox: mtk-cmdq: Convert to platform remove callback returning void
mailbox: mailbox-test: Convert to platform remove callback returning void
mailbox: imx: Convert to platform remove callback returning void
mailbox: bcm-pdc: Convert to platform remove callback returning void
mailbox: bcm-flexrm: Convert to platform remove callback returning void
mailbox: zynqmp-ipi: fix an Excess struct member kernel-doc warning
dt-bindings: mailbox: add Versal IPI bindings
dt-bindings: mailbox: zynqmp: extend required list
mailbox: arm_mhuv2: Fix a bug for mhuv2_sender_interrupt
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Drivers:
- Add support for Allwinner A100 RGB LED controller
- Add support for Maxim 5970 Dual Hot-swap controller
New Device Support:
- Add support for AW20108 to Awinic LED driver
New Functionality:
- Extend support for Net speeds to include; 2.5G, 5G and 10G
- Allow tx/rx and cts/dsr/dcd/rng TTY LEDS to be turned on and off
via sysfs if required
- Add support for hardware control in AW200xx
Fix-ups:
- Use safer methods for string handling
- Improve error handling; return proper error values, simplify,
avoid duplicates, etc
- Replace Mutex use with the Completion mechanism
- Fix include lists; alphabetise, remove unused, explicitly add used
- Use generic platform device properties
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
- Device Tree binding adaptions/conversions/creation
- Continue work to remove superfluous platform .remove() call-backs
- Remove superfluous/defunct code
- Trivial; whitespace, unused variables, spelling, clean-ups, etc
- Avoid unnecessary duplicate locks
Bug Fixes:
- Repair Kconfig based dependency lists
- Ensure unused dynamically allocated data is freed after use
- Fix support for brightness control
- Add missing sufficient delays during reset to ensure correct
operation
- Avoid division-by-zero issues"
* tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (45 commits)
leds: trigger: netdev: Add core support for hw not supporting fallback to LED sw control
leds: trigger: panic: Don't register panic notifier if creating the trigger failed
leds: sun50i-a100: Convert to be agnostic to property provider
leds: max5970: Add missing headers
leds: max5970: Make use of dev_err_probe()
leds: max5970: Make use of device properties
leds: max5970: Remove unused variable
leds: rgb: Drop obsolete dependency on COMPILE_TEST
leds: sun50i-a100: Avoid division-by-zero warning
leds: trigger: Remove unused function led_trigger_rename_static()
leds: qcom-lpg: Introduce a wrapper for getting driver data from a pwm chip
leds: gpio: Add kernel log if devm_fwnode_gpiod_get() fails
dt-bindings: leds: qcom,spmi-flash-led: Fix example node name
dt-bindings: leds: aw200xx: Fix led pattern and add reg constraints
dt-bindings: leds: awinic,aw200xx: Add AW20108 device
leds: aw200xx: Add support for aw20108 device
leds: aw200xx: Improve autodim calculation method
leds: aw200xx: Enable disable_locking flag in regmap config
leds: aw200xx: Add delay after software reset
dt-bindings: leds: aw200xx: Remove property "awinic,display-rows"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd updates from Lee Jones:
"New Device Support:
- Add support for Qualcomm PM8937 PMIC to QCOM SPMI PMIC
Fix-ups:
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
- Device Tree binding adaptions/conversions/creation
- Improve error handling; return proper error values, simplify,
avoid duplicates, etc
- Continue work to remove superfluous platform .remove() call-backs
- Move some exported symbols into private namespaces
- Clean-up and staticify PM related operations
- Trivial; spelling, whitespace, clean-ups, etc
- Fix include lists; alphabetise, remove unused, explicitly add used
Bug Fixes:
- Use PLATFORM_DEVID_AUTO to ensure multiple duplicate devices can
co-exist
- Ensure debugfs register view is correctly presented
- Fix ordering and value issues in current use of
clk_register_fractional_divider()
- Repair Kconfig based dependency lists"
* tag 'mfd-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (50 commits)
mfd: ti_am335x_tscadc: Fix TI SoC dependencies
dt-bindings: mfd: sprd: Add support for UMS9620
mfd: ab8500-sysctrl: Drop ancient charger
mfd: intel-lpss: Fix the fractional clock divider flags
mfd: tps6594: Add null pointer check to tps6594_device_init()
dt-bindings: mfd: pm8008: Clean up example node names
dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Clean up example
dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Fix regulator binding
dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Fix up binding reference
mfd: da9062: Simplify obtaining I2C match data
mfd: syscon: Fix null pointer dereference in of_syscon_register()
mfd: intel-lpss: Don't fail probe on success of pci_alloc_irq_vectors()
mfd: twl6030-irq: Revert to use of_match_device()
mfd: cs42l43: Correct order of include files to be alphabetical
mfd: cs42l43: Correct SoundWire port list
mfd: Fix a few spelling mistakes in PMIC header file comments
mfd: intel-lpss: Provide Intel LPSS PM ops structure
mfd: intel-lpss: Move exported symbols to INTEL_LPSS namespace
mfd: intel-lpss: Adjust header inclusions
mfd: intel-lpss: Use device_get_match_data()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull hwspinlock updates from Bjorn Andersson:
- Correct kernel-doc through the hwspinlock core, to address build
warnings (and improve the documentation)
- Drop unused compatible in the Qualcomm TCSR mutex driver
* tag 'hwlock-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
hwspinlock/core: fix kernel-doc warnings
hwspinlock: qcom: Remove IPQ6018 SOC specific compatible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- The i.MX DSP remoteproc driver adds support for providing a resource
table, in order to enable IPC with the core
- The TI K3 DSP driver is transitioned to remove_new, error messages
are changed to use symbolic error codes, and dev_err_probe() is used
where applicable
- Support for the Qualcomm SC7280 audio, compute and WiFi co-processors
are added to the Qualcomm TrustZone based remoteproc driver
* tag 'rproc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: qcom_q6v5_pas: Add SC7280 ADSP, CDSP & WPSS
dt-bindings: remoteproc: qcom: sc7180-pas: Add SC7280 compatibles
dt-bindings: remoteproc: qcom: sc7180-pas: Fix SC7280 MPSS PD-names
remoteproc: k3-dsp: Convert to platform remove callback returning void
remoteproc: k3-dsp: Use symbolic error codes in error messages
remoteproc: k3-dsp: Suppress duplicate error message in .remove()
arm64: dts: imx8mp: Add reserve-memory nodes for DSP
remoteproc: imx_dsp_rproc: Add mandatory find_loaded_rsc_table op
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
"This make virtio free driver_override upon removal. It also updates
the rpmsg documentation after earlier API updates"
* tag 'rpmsg-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: virtio: Free driver_override when rpmsg_remove()
doc: rmpsg: Update with rpmsg_endpoint
|
|
Pull drm fixes from Dave Airlie:
"This is just a wrap up of fixes from the last few days. It has the
proper fix to the i915/xe collision, we can clean up what you did
later once rc1 lands.
Otherwise it's a few other i915, a v3d, rockchip and a nouveau fix to
make GSP load on some original Turing GPUs.
i915:
- Fixes for kernel-doc warnings enforced in linux-next
- Another build warning fix for string formatting of intel_wakeref_t
- Display fixes for DP DSC BPC and C20 PLL state verification
v3d:
- register readout fix
rockchip:
- two build warning fixes
nouveau:
- fix GSP loading on Turing with different nvdec configuration"
* tag 'drm-next-2024-01-15-1' of git://anongit.freedesktop.org/drm/drm:
nouveau/gsp: handle engines in runl without nonstall interrupts.
drm/i915/perf: reconcile Excess struct member kernel-doc warnings
drm/i915/guc: reconcile Excess struct member kernel-doc warnings
drm/i915/gt: reconcile Excess struct member kernel-doc warnings
drm/i915/gem: reconcile Excess struct member kernel-doc warnings
drm/i915/dp: Fix the max DSC bpc supported by source
drm/i915: don't make assumptions about intel_wakeref_t type
drm/i915/dp: Fix the PSR debugfs entries wrt. MST connectors
drm/i915/display: Fix C20 pll selection for state verification
drm/v3d: Fix support for register debugging on the RPi 4
drm/rockchip: vop2: Drop unused if_dclk_rate variable
drm/rockchip: vop2: Drop superfluous include
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These add support for debugfs-based diagnostics to the thermal core,
simplify the thermal netlink API, fix system-wide PM support in the
Intel HFI driver and clean up some code.
Specifics:
- Add debugfs-based diagnostics support to the thermal core (Daniel
Lezcano, Dan Carpenter)
- Fix a power allocator thermal governor issue preventing it from
resetting cooling devices sometimes (Di Shen)
- Simplify the thermal netlink API and clean up related code (Rafael
J. Wysocki)
- Make the Intel HFI driver support hibernation and deep suspend
properly (Ricardo Neri)"
* tag 'thermal-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/debugfs: Unlock on error path in thermal_debug_tz_trip_up()
thermal: intel: hfi: Add syscore callbacks for system-wide PM
thermal: gov_power_allocator: avoid inability to reset a cdev
thermal: helpers: Rearrange thermal_cdev_set_cur_state()
thermal: netlink: Rework notify API for cooling devices
thermal: core: Use kstrdup_const() during cooling device registration
thermal/debugfs: Add thermal debugfs information for mitigation episodes
thermal/debugfs: Add thermal cooling device debugfs information
thermal: netlink: Pass thermal zone pointer to notify routines
thermal: netlink: Drop thermal_notify_tz_trip_add/delete()
thermal: netlink: Pass pointers to thermal_notify_tz_trip_up/down()
thermal: netlink: Pass pointers to thermal_notify_tz_trip_change()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These add support for new MADT flags to ACPICA, constify the PNP bus
type structure and add new ACPI IRQ management quirks.
Specifics:
- Make pnp_bus_type const (Greg Kroah-Hartman)
- Add ACPI IRQ management quirks for ASUS ExpertBook B1502CGA and
ASUS Vivobook E1504GA and E1504GAB (Ben Mayo, Michael Maltsev)
- Add new MADT GICC/GICR/ITS non-coherent flags and GICC online
capable bit handling to ACPICA (Lorenzo Pieralisi)"
* tag 'acpi-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: MADT: Add new MADT GICC/GICR/ITS non-coherent flags handling
ACPICA: MADT: Add GICC online capable bit handling
ACPI: resource: Skip IRQ override on ASUS ExpertBook B1502CGA
ACPI: resource: Add DMI quirks for ASUS Vivobook E1504GA and E1504GAB
PNP: make pnp_bus_type const
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These restore the asynchronous device resume optimization removed by
the previous PM merge, make the intel_pstate driver work better on
Meteor Lake systems, optimize the PM QoS core code slightly and fix up
typos in admin-guide.
Specifics:
- Restore the system-wide asynchronous device resume optimization
removed by a recent concurrency fix (Rafael J. Wysocki)
- Make the intel_pstate cpufreq driver allow Meteor Lake systems to
run at somewhat higher frequencies (Srinivas Pandruvada)
- Make the PM QoS core code use kcalloc() for array allocation (Erick
Archer)
- Fix two PM-related typos in admin-guide (Erwan Velu)"
* tag 'pm-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Restore asynchronous device resume optimization
Documentation: admin-guide: PM: Fix two typos
cpufreq: intel_pstate: Update hybrid scaling factor for Meteor Lake
PM: QoS: Use kcalloc() instead of kzalloc()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- update some Xen PV interface related headers
- fix some kernel-doc comments in the xenbus driver
- fix the Xen gntdev driver to not access the struct page of pages
imported from a DMA-buf
* tag 'for-linus-6.8-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/gntdev: Fix the abuse of underlying struct page in DMA-buf import
xen/xenbus: client: fix kernel-doc comments
xen: update PV-device interface headers
|
|
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"Two small fixes for the parisc architecture:
- Fix PDC address calculation with narrow firmware (64-bit kernel on
32-bit firmware)
- Fix kthread which checks power button get started on qemu too"
* tag 'parisc-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/power: Fix power soft-off button emulation on qemu
parisc/firmware: Fix F-extend for PDC addresses
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
"UBI:
- Use in-tree fault injection framework and add new injection types
- Fix for a memory leak in the block driver
UBIFS:
- kernel-doc fixes
- Various minor fixes"
* tag 'ubifs-for-linus-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: block: fix memleak in ubiblock_create()
ubifs: fix kernel-doc warnings
mtd: Add several functions to the fail_function list
ubi: Reserve sufficient buffer length for the input mask
ubi: Add six fault injection type for testing
ubi: Split io_failures into write_failure and erase_failure
ubi: Use the fault injection framework to enhance the fault injection capability
ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path
ubifs: Check @c->dirty_[n|p]n_cnt and @c->nroot state under @c->lp_mutex
ubifs: describe function parameters
ubifs: auth.c: fix kernel-doc function prototype warning
ubifs: use crypto_shash_tfm_digest() in ubifs_hmac_wkm()
|
|
Merge a PNP change, new ACPI IRQ management quirks and a small ACPICA
code update for 6.8-rc1:
- Make pnp_bus_type const (Greg Kroah-Hartman).
- Add ACPI IRQ management quirks for ASUS ExpertBook B1502CGA and ASUS
Vivobook E1504GA and E1504GAB (Ben Mayo, Michael Maltsev).
- Add new MADT GICC/GICR/ITS non-coherent flags and GICC online capable
bit handling to ACPICA (Lorenzo Pieralisi).
* pnp:
PNP: make pnp_bus_type const
* acpi-resource:
ACPI: resource: Skip IRQ override on ASUS ExpertBook B1502CGA
ACPI: resource: Add DMI quirks for ASUS Vivobook E1504GA and E1504GAB
* acpica:
ACPICA: MADT: Add new MADT GICC/GICR/ITS non-coherent flags handling
ACPICA: MADT: Add GICC online capable bit handling
|
|
Merge additional updates for 6.8-rc1 in the thermal core and in the
Intel HFI thermal driver:
- Add debugfs-based diagnostics support to the thermal core (Daniel
Lezcano, Dan Carpenter).
- Fix a power allocator thermal governor issue preventing it from
resetting cooling devices sometimes (Di Shen).
- Simplify the thermal netlink API and clean up related code (Rafael J.
Wysocki).
- Make the Intel HFI driver support hibernation and deep suspend
properly (Ricardo Neri).
* thermal-core:
thermal/debugfs: Unlock on error path in thermal_debug_tz_trip_up()
thermal: gov_power_allocator: avoid inability to reset a cdev
thermal: helpers: Rearrange thermal_cdev_set_cur_state()
thermal: netlink: Rework notify API for cooling devices
thermal: core: Use kstrdup_const() during cooling device registration
thermal/debugfs: Add thermal debugfs information for mitigation episodes
thermal/debugfs: Add thermal cooling device debugfs information
thermal: netlink: Pass thermal zone pointer to notify routines
thermal: netlink: Drop thermal_notify_tz_trip_add/delete()
thermal: netlink: Pass pointers to thermal_notify_tz_trip_up/down()
thermal: netlink: Pass pointers to thermal_notify_tz_trip_change()
* thermal-intel:
thermal: intel: hfi: Add syscore callbacks for system-wide PM
|
|
* pm-sleep:
PM: sleep: Restore asynchronous device resume optimization
* pm-cpufreq:
Documentation: admin-guide: PM: Fix two typos
cpufreq: intel_pstate: Update hybrid scaling factor for Meteor Lake
* pm-qos:
PM: QoS: Use kcalloc() instead of kzalloc()
|
|
It appears on TU106 GPUs (2070), that some of the nvdec engines
are in the runlist but have no valid nonstall interrupt, nouveau
didn't handle that too well.
This should let nouveau/gsp work on those.
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/all/20240110011826.3996289-1-airlied@gmail.com/
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
A fix for the v3d register readout, and two compilation fixes for
rockchip.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/warlsyhbwarbezejzokxvrpnmvoaajonj6khjobvnfrhttrsks@fqoeqrjrct6l
|
|
Add CMDQ driver support for mt8188 by adding its compatible and
driver data in CMDQ driver.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Sort cmdq platform data according to the number sequence of
compatible names.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Rename gce_plat variable postfix from 'v1~v7' to SoC names.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
kernel test robot reports 2 Excess struct member warnings:
zynqmp-ipi-mailbox.c:92: warning: Excess struct member 'irq' description in 'zynqmp_ipi_mbox'
zynqmp-ipi-mailbox.c:112: warning: Excess struct member 'ipi_mboxes' description in 'zynqmp_ipi_pdata'
The second one is a false positive that is caused by the
__counted_by() attribute. Kees has posted a patch for that, so just
fix the first one.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312150705.glrQ4ypv-lkp@intel.com/
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Message Handling Unit version is v2.1.
When arm_mhuv2 working with the data protocol transfer mode.
We have split one mhu into two channels, and every channel
include four channel windows, the two channels share
one gic spi interrupt.
There is a problem with the sending scenario.
The first channel will take up 0-3 channel windows, and the second
channel take up 4-7 channel windows. When the first channel send the
data, and the receiver will clear all the four channels status.
Although we only enabled the interrupt on the last channel window with
register CH_INT_EN,the register CHCOMB_INT_ST0 will be 0xf, not be 0x8.
Currently we just clear the last channel windows int status with the
data proctol mode.So after that,the CHCOMB_INT_ST0 status will be 0x7,
not be the 0x0.
Then the second channel send the data, the receiver read the
data, clear all the four channel windows status, trigger the sender
interrupt. But currently the CHCOMB_INT_ST0 register will be 0xf7,
get_irq_chan_comb function will always return the first channel.
So this patch clear all channel windows int status to avoid this interrupt
confusion.
Signed-off-by: Xiaowu.ding <xiaowu.ding@jaguarmicro.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Similarly to previous commit e17225887005 ("mailbox: qcom-apcs-ipc: do
not grow the of_device_id"), move compatibles with fallbacks in the
of_device_id table, to indicate these are not necessary. This only
shuffles the code. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Convert FPGA bridge, all TPMs (finally), and Rockchip HDMI bindings
to schemas
- Improvements in Samsung GPU schemas
- A few more cases of dropping unneeded quotes in schemas
- Merge QCom idle-states txt binding into common idle-states schema
- Add X1E80100, SM8650, SM8650, and SDX75 SoCs to QCom Power Domain
Controller
- Add NXP i.mx8dl to SCU PD
- Add synaptics r63353 panel controller
- Clarify the wording around the use of 'wakeup-source' property
- Add a DTS coding style doc
- Add smi vendor prefix
- Fix DT_SCHEMA_FILES incorrect matching of paths outside the kernel
tree
- Disable sysfb (e.g. EFI FB) when simple-framebuffer node is present
- Fix double free in of_parse_phandle_with_args_map()
- A couple of kerneldoc fixes
* tag 'devicetree-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (37 commits)
of: unittest: Fix of_count_phandle_with_args() expected value message
dt-bindings: fpga: altera: Convert bridge bindings to yaml
dt-bindings: fpga: Convert bridge binding to yaml
dt-bindings: vendor-prefixes: Add smi
dt-bindings: power: Clarify wording for wakeup-source property
of: Fix double free in of_parse_phandle_with_args_map
dt-bindings: ignore paths outside kernel for DT_SCHEMA_FILES
drivers: of: Fixed kernel doc warning
dt-bindings: tpm: Document Microsoft fTPM bindings
dt-bindings: tpm: Convert IBM vTPM bindings to DT schema
dt-bindings: tpm: Convert Google Cr50 bindings to DT schema
dt-bindings: tpm: Consolidate TCG TIS bindings
dt-bindings: display: rockchip,inno-hdmi: Document RK3128 compatible
dt-bindings: arm: Add remote etm dt-binding
dt-bindings: mmc: sdhci-pxa: Fix 'regs' typo
media: dt-bindings: samsung,s5p-mfc: Fix iommu properties schemas
dt-bindings: display: panel: Add synaptics r63353 panel controller
dt-bindings: arm: merge qcom,idle-state with idle-state
dt-bindings: drm: rockchip: convert inno_hdmi-rockchip.txt to yaml
dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This contains a bunch of cleanups and simplifications across the
board, as well as a number of small fixes.
Perhaps the most notable change here is the addition of an API that
allows PWMs to be used in atomic contexts, which is useful when time-
critical operations are involved, such as using a PWM to generate IR
signals.
Finally, I have decided to step down as PWM subsystem maintainer. Due
to other responsibilities I have lately not been able to find the time
that the subsystem deserves and Uwe, who has been helping out a lot
for the past few years and has many things planned for the future, has
kindly volunteered to take over. I have no doubt that he will be a
suitable replacement"
* tag 'pwm/for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits)
MAINTAINERS: pwm: Thierry steps down, Uwe takes over
pwm: linux/pwm.h: fix Excess kernel-doc description warning
pwm: Add pwm_apply_state() compatibility stub
pwm: cros-ec: Drop documentation for dropped struct member
pwm: Drop two unused API functions
pwm: lpc18xx-sct: Don't modify the cached period of other PWM outputs
pwm: meson: Simplify using dev_err_probe()
pwm: stmpe: Silence duplicate error messages
pwm: Reduce number of pointer dereferences in pwm_device_request()
pwm: crc: Use consistent variable naming for driver data
pwm: omap-dmtimer: Drop locking
dt-bindings: pwm: ti,pwm-omap-dmtimer: Update binding for yaml
media: pwm-ir-tx: Trigger edges from hrtimer interrupt context
pwm: bcm2835: Allow PWM driver to be used in atomic context
pwm: Make it possible to apply PWM changes in atomic context
pwm: renesas: Remove unused include
pwm: Replace ENOTSUPP with EOPNOTSUPP
pwm: Rename pwm_apply_state() to pwm_apply_might_sleep()
pwm: Stop referencing pwm->chip
pwm: Update kernel doc for struct pwm_chip
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- assorted functional fixes for hid-steam ported from SteamOS betas
(Vicki Pfau)
- fix for custom sensor-hub sensors (hinge angle sensor and LISS
sensors) not working (Yauhen Kharuzhy)
- functional fix for handling Confidence in Wacom driver (Jason
Gerecke)
- support for Ilitek ili2901 touchscreen (Zhengqiao Xia)
- power management fix for Wacom userspace battery exporting
(Tatsunosuke Tobita)
- rework of wait-for-reset in order to reduce the need for
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET qurk; the success rate is now 50%
better, but there are still further improvements to be made (Hans de
Goede)
- greatly improved coverage of Tablets in hid-selftests (Benjamin
Tissoires)
- support for Nintendo NSO controllers -- SNES, Genesis and N64 (Ryan
McClelland)
- support for controlling mcp2200 GPIOs (Johannes Roith)
- power management improvement for EHL OOB wakeup in intel-ish
(Kai-Heng Feng)
- other assorted device-specific fixes and code cleanups
* tag 'hid-for-linus-2024010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (53 commits)
HID: amd_sfh: Add a new interface for exporting ALS data
HID: amd_sfh: Add a new interface for exporting HPD data
HID: amd_sfh: rename float_to_int() to amd_sfh_float_to_int()
HID: i2c-hid: elan: Add ili2901 timing
dt-bindings: HID: i2c-hid: elan: Introduce Ilitek ili2901
HID: bpf: make bus_type const in struct hid_bpf_ops
HID: make ishtp_cl_bus_type const
HID: make hid_bus_type const
HID: hid-steam: Add gamepad-only mode switched to by holding options
HID: hid-steam: Better handling of serial number length
HID: hid-steam: Update list of identifiers from SDL
HID: hid-steam: Make client_opened a counter
HID: hid-steam: Clean up locking
HID: hid-steam: Disable watchdog instead of using a heartbeat
HID: hid-steam: Avoid overwriting smoothing parameter
HID: magicmouse: fix kerneldoc for struct magicmouse_sc
HID: sensor-hub: Enable hid core report processing for all devices
HID: wacom: Add additional tests of confidence behavior
HID: wacom: Correct behavior when processing some confidence == false touches
HID: nintendo: add support for nso controllers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Three fbdev drivers (~8500 lines of code) removed. The Carillo Ranch
fbdev driver is for an Intel product which was never shipped, and for
the intelfb and the amba-clcd drivers the drm drivers can be used
instead.
The other code changes are minor: some fb_deferred_io flushing fixes,
imxfb margin fixes and stifb cleanups.
Summary:
- Remove intelfb fbdev driver (Thomas Zimmermann)
- Remove amba-clcd fbdev driver (Linus Walleij)
- Remove vmlfb Carillo Ranch fbdev driver (Matthew Wilcox)
- fb_deferred_io flushing fixes (Nam Cao)
- imxfb code fixes and cleanups (Dario Binacchi)
- stifb primary screen detection cleanups (Thomas Zimmermann)"
* tag 'fbdev-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (28 commits)
fbdev/intelfb: Remove driver
fbdev/hyperv_fb: Do not clear global screen_info
firmware/sysfb: Clear screen_info state after consuming it
fbdev/hyperv_fb: Remove firmware framebuffers with aperture helpers
drm/hyperv: Remove firmware framebuffers with aperture helper
fbdev/sis: Remove dependency on screen_info
video/logo: use %u format specifier for unsigned int values
video/sticore: Remove info field from STI struct
arch/parisc: Detect primary video device from device instance
fbdev/stifb: Allocate fb_info instance with framebuffer_alloc()
video/sticore: Store ROM device in STI struct
fbdev: flush deferred IO before closing
fbdev: flush deferred work in fb_deferred_io_fsync()
fbdev: amba-clcd: Delete the old CLCD driver
fbdev: Remove support for Carillo Ranch driver
fbdev: hgafb: fix kernel-doc comments
fbdev: mmp: Fix typo and wording in code comment
fbdev: fsl-diu-fb: Fix sparse warning due to virt_to_phys() prototype change
fbdev: imxfb: add '*/' on a separate line in block comment
fbdev: imxfb: use __func__ for function name
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l core: subdev frame interval now supports which field
- v4l kapi: moves and renames the init_cfg pad op to init_state as an
internal op.
- new sensor drivers: gc0308, gc2145, Avnet Alvium, ov64a40, tw9900
- new camera driver: STM32 DCMIPP
- s5p-mfc has gained MFC v12 support
- new ISP driver added to staging: Starfive
- new stateful encoder/decoded: Wave5 codec It is found on the J721S2
SoC, JH7100 SoC, ssd202d SoC. Etc.
- fwnode gained support for MIPI "DisCo for Imaging"
(https://www.mipi.org/specifications/mipi-disco-imaging)
- as usual, lots of cleanups, fixups and driver improvements.
* tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (309 commits)
media: i2c: thp7312: select CONFIG_FW_LOADER
media: i2c: mt9m114: use fsleep() in place of udelay()
media: videobuf2: core: Rename min_buffers_needed field in vb2_queue
media: i2c: thp7312: Store frame interval in subdev state
media: docs: uAPI: Fix documentation of 'which' field for routing ioctls
media: docs: uAPI: Expand error documentation for invalid 'which' value
media: docs: uAPI: Clarify error documentation for invalid 'which' value
media: v4l2-subdev: Store frame interval in subdev state
media: v4l2-subdev: Add which field to struct v4l2_subdev_frame_interval
media: v4l2-subdev: Turn .[gs]_frame_interval into pad operations
media: v4l: subdev: Move out subdev state lock macros outside CONFIG_MEDIA_CONTROLLER
media: s5p-mfc: DPB Count Independent of VIDIOC_REQBUF
media: s5p-mfc: Load firmware for each run in MFCv12.
media: s5p-mfc: Set context for valid case before calling try_run
media: s5p-mfc: Add support for DMABUF for encoder
media: s5p-mfc: Add support for UHD encoding.
media: s5p-mfc: Add support for rate controls in MFCv12
media: s5p-mfc: Add YV12 and I420 multiplanar format support
media: s5p-mfc: Add initial support for MFCv12
media: s5p-mfc: Rename IS_MFCV10 macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Ira Weiny:
"A mix of bug fixes and updates to interfaces used by nvdimm:
- Updates to interfaces include:
Use the new scope based management
Remove deprecated ida interfaces
Update to sysfs_emit()
- Fixup kdoc comments"
* tag 'libnvdimm-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
acpi/nfit: Use sysfs_emit() for all attributes
nvdimm/namespace: fix kernel-doc for function params
nvdimm/dimm_devs: fix kernel-doc for function params
nvdimm/btt: fix btt_blk_cleanup() kernel-doc
nvdimm-btt: simplify code with the scope based resource management
nvdimm: Remove usage of the deprecated ida_simple_xx() API
ACPI: NFIT: Use cleanup.h helpers instead of devm_*()
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Don't force a retune before eMMC RPMB switch
- Add optional HS400 tuning in HS400es initialization
- Add a sysfs node to for write-protect-group-size
- Add re-tuning test to the mmc-test module
- Use mrq.sbc to support close-ended ioctl requests
MMC host:
- mmci: Add support for SDIO in-band irqs for the stm32 variant
- mmc_spi: Remove broken support custom DMA mapped buffers
- mtk-sd: Improve and extend the support for tunings
- renesas_sdhi: Document support for the RZ/Five variant
- sdhci_am654: Drop support for the ti,otap-del-sel DT property
- sdhci-brcmstb: Add support for the brcm 74165b0 variant
- sdhci-msm: Add compatibles for IPQ4019 and IPQ8074
- sdhci-of-dwcmshc: Add support for the T-Head TH1520 variant
- sdhci-xenon: Add support for the Marvell ac5 variant"
* tag 'mmc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (27 commits)
mmc: xenon: Add ac5 support via bounce buffer
dt-bindings: mmc: add Marvell ac5
mmc: sdhci-brcmstb: add new sdhci reset sequence for brcm 74165b0
dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 74165b0
mmc: core: Do not force a retune before RPMB switch
mmc: core: Add HS400 tuning in HS400es initialization
mmc: sdhci_omap: Fix TI SoC dependencies
mmc: sdhci_am654: Fix TI SoC dependencies
mmc: core: Add wp_grp_size sysfs node
mmc: mmc_test: Add re-tuning test
mmc: mmc_spi: remove custom DMA mapped buffers
dt-bindings: mmc: sdhci-msm: document dedicated IPQ4019 and IPQ8074
dt-bindings: mmc: synopsys-dw-mshc: add iommus for Intel SocFPGA
mmc: mtk-sd: Extend number of tuning steps
dt-bindings: mmc: mtk-sd: add tuning steps related property
mmc: sdhci-omap: don't misuse kernel-doc marker
mmc: mtk-sd: Increase the verbosity of msdc_track_cmd_data
mmc: core: Use mrq.sbc in close-ended ffu
mmc: sdhci_am654: Drop lookup for deprecated ti,otap-del-sel
mmc: sdhci-of-dwcmshc: Use logical OR instead of bitwise OR in dwcmshc_probe()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"Core:
- Move the generic PM domain and its governor to the pmdomain
subsystem
- Drop the unused pm_genpd_opp_to_performance_state()
Providers:
- Convert some providers to let the ->remove() callback return void
- amlogic: Add support for G12A ISP power domain
- arm: Move the SCPI power-domain driver to the pmdomain subsystem
- arm: Move Kconfig options to the pmdomain subsystem
- qcom: Update part number to X1E80100 for the rpmhpd"
* tag 'pmdomain-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
PM: domains: Move genpd and its governor to the pmdomain subsystem
PM: domains: Drop redundant header for genpd
PM: domains: Drop the unused pm_genpd_opp_to_performance_state()
PM: domains: fix domain_governor kernel-doc warnings
pmdomain: xilinx/zynqmp: Convert to platform remove callback returning void
pmdomain: qcom-cpr: Convert to platform remove callback returning void
pmdomain: imx93-pd: Convert to platform remove callback returning void
pmdomain: imx93-blk-ctrl: Convert to platform remove callback returning void
pmdomain: imx8mp-blk-ctrl: Convert to platform remove callback returning void
pmdomain: imx8m-blk-ctrl: Convert to platform remove callback returning void
pmdomain: imx-gpcv2: Convert to platform remove callback returning void
pmdomain: imx-gpc: Convert to platform remove callback returning void
pmdomain: imx-pgc: Convert to platform remove callback returning void
pmdomain: amlogic: meson-ee-pwrc: add support for G12A ISP power domain
dt-bindings: power: meson-g12a-power: document ISP power domain
firmware: arm_scpi: Move power-domain driver to the pmdomain dir
pmdomain: arm_scmi: Move Kconfig options to the pmdomain subsystem
pmdomain: qcom: rpmhpd: Update part number to X1E80100
dt-bindings: power: rpmpd: Update part number to X1E80100
|
|
Pull rdma updates from Jason Gunthorpe:
"Small cycle, with some typical driver updates:
- General code tidying in siw, hfi1, idrdma, usnic, hns rtrs and
bnxt_re
- Many small siw cleanups without an overeaching theme
- Debugfs stats for hns
- Fix a TX queue timeout in IPoIB and missed locking of the mcast
list
- Support more features of P7 devices in bnxt_re including a new work
submission protocol
- CQ interrupts for MANA
- netlink stats for erdma
- EFA multipath PCI support
- Fix Incorrect MR invalidation in iser"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (66 commits)
RDMA/bnxt_re: Fix error code in bnxt_re_create_cq()
RDMA/efa: Add EFA query MR support
IB/iser: Prevent invalidating wrong MR
RDMA/erdma: Add hardware statistics support
RDMA/erdma: Introduce dma pool for hardware responses of CMDQ requests
IB/iser: iscsi_iser.h: fix kernel-doc warning and spellos
RDMA/mana_ib: Add CQ interrupt support for RAW QP
RDMA/mana_ib: query device capabilities
RDMA/mana_ib: register RDMA device with GDMA
RDMA/bnxt_re: Fix the sparse warnings
RDMA/bnxt_re: Fix the offset for GenP7 adapters for user applications
RDMA/bnxt_re: Share a page to expose per CQ info with userspace
RDMA/bnxt_re: Add UAPI to share a page with user space
IB/ipoib: Fix mcast list locking
RDMA/mlx5: Expose register c0 for RDMA device
net/mlx5: E-Switch, expose eswitch manager vport
net/mlx5: Manage ICM type of SW encap
RDMA/mlx5: Support handling of SW encap ICM area
net/mlx5: Introduce indirect-sw-encap ICM properties
RDMA/bnxt_re: Adds MSN table capability for Gen P7 adapters
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"This includes the series of changes related to device attributes, as
well as slight code refactoring.
Some old devices are recognized to have legacy layout of configuration
ROM. They have an inconvenience that FireWire subsystem adds no
attributes for vendor information to corresponding devices. The main
purpose of this update is to rectify the inconvenience.
We have a slight concern about regression. The update changes the
value of modalias for the unit devices by populating its model field,
which was previously left as zero in the case. I've assessed the
potential impact of this change and anticipate it to have minimal
concern for both the kernel and user lands. The change is enough
acceptable"
* tag 'firewire-updates-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: fill model field in modalias of unit device for legacy layout of configuration ROM
firewire: core: detect model name for legacy layout of configuration ROM
firewire: core: detect numeric model identifier for legacy layout of configuration ROM
firewire: test: add test of device attributes for legacy AV/C device
firewire: test: add test of device attributes for simple AV/C device
firewire: test: add KUnit test for device attributes
firewire: core: replace magic number with macro
firewire: core: adds constant qualifier for local helper functions
firewire: make fw_bus_type const
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss
Pull GNSS updates from Johan Hovold:
- support for the reset pin found on some u-blox receivers
- use new regulator helper for the u-blox backup supply
* tag 'gnss-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss:
gnss: ubx: add support for the reset gpio
dt-bindings: gnss: u-blox: add "reset-gpios" binding
gnss: ubx: use new helper to remove open coded regulator handling
|
