| Age | Commit message (Collapse) | Author |
|---|
|
Remove braces from single statement if expression in hdcp1_execution.c
file
Signed-off-by: Marcelo Mendes Spessoto Junior <marcelomspessoto@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The hwmgr->backend, (i.e. data) allocated by kzalloc is not freed in
the error-handling paths of smu7_get_evv_voltages and
smu7_update_edc_leakage_table. However, it did be freed in the
error-handling of phm_initializa_dynamic_state_adjustment_rule_settings,
by smu7_hwmgr_backend_fini. So the lack of free in smu7_get_evv_voltages
and smu7_update_edc_leakage_table is considered a memleak in this patch.
Fixes: 599a7e9fe1b6 ("drm/amd/powerplay: implement smu7 hwmgr to manager asics with smu ip version 7.")
Fixes: 8f0804c6b7d0 ("drm/amd/pm: add edc leakage controller setting")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix the following about iterator use:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1456 kfd_add_peer_prop() warn: iterator used outside loop: 'iolink3'
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Return value of container_of(...) can't be null, so null check is not
required for 'fence'. Hence drop its NULL check.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_fence.c:93 to_amdgpu_amdkfd_fence() warn: can 'fence' even be NULL?
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
kfd_topology.c
Before using list_first_entry, make sure to check that list is not
empty, if list is empty return -ENODATA.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1347 kfd_create_indirect_link_prop() warn: can 'gpu_link' even be NULL?
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1428 kfd_add_peer_prop() warn: can 'iolink1' even be NULL?
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1433 kfd_add_peer_prop() warn: can 'iolink2' even be NULL?
Fixes: 0f28cca87e9a ("drm/amdkfd: Extend KFD device topology to surface peer-to-peer links")
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
'amdgpu_ucode_request()'
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c:1404 amdgpu_ucode_request() warn: '*fw' from request_firmware() not released on lines: 1404.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
'amdgpu_mca_smu_get_mca_entry()'
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c:377 amdgpu_mca_smu_get_mca_entry() warn: variable dereferenced before check 'mca_funcs' (see line 368)
357 int amdgpu_mca_smu_get_mca_entry(struct amdgpu_device *adev,
enum amdgpu_mca_error_type type,
358 int idx, struct mca_bank_entry *entry)
359 {
360 const struct amdgpu_mca_smu_funcs *mca_funcs =
adev->mca.mca_funcs;
361 int count;
362
363 switch (type) {
364 case AMDGPU_MCA_ERROR_TYPE_UE:
365 count = mca_funcs->max_ue_count;
mca_funcs is dereferenced here.
366 break;
367 case AMDGPU_MCA_ERROR_TYPE_CE:
368 count = mca_funcs->max_ce_count;
mca_funcs is dereferenced here.
369 break;
370 default:
371 return -EINVAL;
372 }
373
374 if (idx >= count)
375 return -EINVAL;
376
377 if (mca_funcs && mca_funcs->mca_get_mca_entry)
^^^^^^^^^
Checked too late!
Cc: Yang Wang <kevinyang.wang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This param can help isolating data path issues on new systems in early phase.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes the below:
drivers/gpu/drm/amd/amdgpu/atom.c:398 atom_skip_src_int() warn: ignoring unreachable code.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
mod_freesync header file has duplicated copyright boilerplate. Drop the
duplicate.
Signed-off-by: Marcelo Mendes Spessoto Junior <marcelomspessoto@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It's no longer required.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2318
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This was included in gpu_info firmware, move it into the
driver for consistency with other nv1x parts.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2318
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
without PSR
The check for sending the vsc infopacket to the display was gated behind
PSR (Panel Self Refresh) being enabled.
The vsc infopacket also contains the colorimetry (specifically the
container color gamut) information for the stream on modern DP.
PSR is typically only supported on mobile phone eDP displays, thus this
was not getting sent for typical desktop monitors or TV screens.
This functionality is needed for proper HDR10 functionality on DP as it
wants BT2020 RGB/YCbCr for the container color space.
Cc: stable@vger.kernel.org
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Xaver Hugl <xaver.hugl@gmail.com>
Cc: Melissa Wen <mwen@igalia.com>
Fixes: 15f9dfd545a1 ("drm/amd/display: Register Colorspace property for DP and HDMI")
Tested-by: Simon Berz <simon@berz.me>
Tested-by: Xaver Hugl <xaver.hugl@kde.org>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Not needed any more with firmware fixes
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Expose sysfs entry mem_busy_percent for GC version
9.4.3 APU system
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Commit 5a028e8f062f ("drm/rockchip: vop2: Add support for rk3588")
introduced a variable which ended up being unused:
rockchip_drm_vop2.c:1688:23: warning: variable ‘if_dclk_rate’ set but not used [-Wunused-but-set-variable]
This has been initially used as part of a formula to compute the clock
dividers, but eventually it has been replaced by static values.
Drop the variable declaration and move its assignment to the comment
block, to serve as documentation of how the constants have been
generated.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240105174007.98054-1-cristian.ciocaltea@collabora.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A single patch to suppress unexpected system reboot in AMD Ryzen
machines with PCIe card consisting of Asmedia ASM1083/1085 and
VT6306/6307/6308.
When the 1394 OHCI driver for the card accesses a specific register
in PCI memory space, the system reboot often occurs.
The issue affects all versions of Linux kernel as long as the 1394
OHCI driver is included. The mechanism of unexpected system reboot is
not clear, so the driver is changed to avoid the access itself when
detecting the combination of hardware"
* tag 'firewire-fixes-6.7-final' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: ohci: suppress unexpected system reboot in AMD Ryzen machines and ASM108x/VT630x PCIe cards
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix releasing the host by canceling the delayed work
- Fix pause retune on all RPMB partitions
MMC host:
- meson-mx-sdhc: Fix HW hang during card initialization
- sdhci-sprd: Fix eMMC init failure after HW reset"
* tag 'mmc-v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-sprd: Fix eMMC init failure after hw reset
mmc: core: Cancel delayed work before releasing host
mmc: rpmb: fixes pause retune on all RPMB partitions.
mmc: meson-mx-sdhc: Fix initialization frozen issue
|
|
Pull more drm fixes from Dave Airlie:
"The amdgpu ones are fairly normal, the one that is a bit large is a
fix for a newly introduced IP in 6.7 so unlikely to cause regressions.
The nouveau ones are mostly memory leaks and debugging cleanups from
the GSP (new nvidia firmware) enablement. There are some GSP changes
to the message passing code and a subsequent fix for eDP panel turn
on, that means my laptop can turn on the panel in GSP mode. These are
fairly low chance of disrupting things since GSP is new in 6.7. The
final not all in GSP fix is a deadlock seen with i915/nouveau when GSP
is used where the the fence and irq paths have locking inversions,
I've pushed some irq enablement out to a workqueue, and this has seen
some fairly decent testing.
amdgpu:
- DP MST fix
- SMU 13.0.6 fixes
- fix displays on macbooks using vega12
- fix VSC and colorimetry on DP/eDP
nouveau:
- fix deadlock between fence signalling and irq paths
- fix GSP memory leaks
- fix GSP leftover debug
- hide some GSP callback messages
- fix GSP display disable path
- fix GSP ACPI interaction
- handle errors in ctrl messages
- use errors info to fix DP link training"
* tag 'drm-fixes-2024-01-05' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/dp: Honor GSP link training retry timeouts
nouveau: push event block/allowing out of the fence context
nouveau/gsp: always free the alloc messages on r535
nouveau/gsp: don't free ctrl messages on errors
nouveau/gsp: convert gsp errors to generic errors
drm/nouveau/gsp: Fix ACPI MXDM/MXDS method invocations
nouveau/gsp: free userd allocation.
nouveau/gsp: free acpi object after use
nouveau: fix disp disabling with GSP
nouveau/gsp: drop some acpi related debug
nouveau/gsp: add three notifier callbacks that we see in normal operation (v2)
drm/amd/pm: Use gpu_metrics_v1_5 for SMUv13.0.6
drm/amd/pm: Add gpu_metrics_v1_5
drm/amd/pm: Add mem_busy_percent for GCv9.4.3 apu
drm/amd/display: Fix sending VSC (+ colorimetry) packets for DP/eDP displays without PSR
drm/amdgpu: skip gpu_info fw loading on navi12
drm/amd/display: add nv12 bounding box
drm/amd/pm: Update metric table for jpeg/vcn data
drm/amd/pm: Use separate metric table for APU
drm/amd/display: pbn_div need be updated for hotplug event
|
|
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to all the ATM modules and drivers.
Link: https://lore.kernel.org/r/20240104143737.1317945-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement ffo_get() pin op filling it up to MSEED.frequency_diff value.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://lore.kernel.org/r/20240103132838.1501801-4-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of passing separate args, introduce
struct mlx5_dpll_synce_status to hold the values obtained by
mlx5_dpll_synce_status_get().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://lore.kernel.org/r/20240103132838.1501801-3-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new netlink attribute to expose fractional frequency offset value
for a pin. Add an op to get the value from the driver.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://lore.kernel.org/r/20240103132838.1501801-2-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge changes in thermal control drivers for Intel platforms for
6.8-rc1:
- Make the Intel HFI thermal driver enable an HFI instance (eg. processor
package) from its first online CPU and disable it when the last CPU in
it goes offline (Ricardo Neri).
* thermal-intel:
thermal: intel: hfi: Disable an HFI instance when all its CPUs go offline
thermal: intel: hfi: Enable an HFI instance from its first online CPU
thermal: intel: hfi: Refactor enabling code into helper functions
|
|
ASM108x/VT630x PCIe cards
VIA VT6306/6307/6308 provides PCI interface compliant to 1394 OHCI. When
the hardware is combined with Asmedia ASM1083/1085 PCIe-to-PCI bus bridge,
it appears that accesses to its 'Isochronous Cycle Timer' register (offset
0xf0 on PCI memory space) often causes unexpected system reboot in any
type of AMD Ryzen machine (both 0x17 and 0x19 families). It does not
appears in the other type of machine (AMD pre-Ryzen machine, Intel
machine, at least), or in the other OHCI 1394 hardware (e.g. Texas
Instruments).
The issue explicitly appears at a commit dcadfd7f7c74 ("firewire: core:
use union for callback of transaction completion") added to v6.5 kernel.
It changed 1394 OHCI driver to access to the register every time to
dispatch local asynchronous transaction. However, the issue exists in
older version of kernel as long as it runs in AMD Ryzen machine, since
the access to the register is required to maintain bus time. It is not
hard to imagine that users experience the unexpected system reboot when
generating bus reset by plugging any devices in, or reading the register
by time-aware application programs; e.g. audio sample processing.
This commit suppresses the unexpected system reboot in the combination of
hardware. It avoids the access itself. As a result, the software stack can
not provide the hardware time anymore to unit drivers, userspace
applications, and nodes in the same IEEE 1394 bus. It brings apparent
disadvantage since time-aware application programs require it, while
time-unaware applications are available again; e.g. sbp2.
Cc: stable@vger.kernel.org
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1215436
Reported-by: Mario Limonciello <mario.limonciello@amd.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217994
Reported-by: Tobias Gruetzmacher <tobias-lists@23.gs>
Closes: https://sourceforge.net/p/linux1394/mailman/message/58711901/
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2240973
Closes: https://bugs.launchpad.net/linux/+bug/2043905
Link: https://lore.kernel.org/r/20240102110150.244475-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
There used to be a of_node_put(priv->master_mii_dn) call in
bcm_sf2_mdio_unregister(), which was accidentally deleted in commit
6ca80638b90c ("net: dsa: Use conduit and user terms").
But it's not needed - we don't need to hold a reference on the
"brcm,unimac-mdio" OF node for that long, since we don't do anything
with it. We can release it as soon as we finish bcm_sf2_mdio_register().
Also reduce "if (err && dn)" to just "if (err)". We know "dn", aka the
former priv->master_mii_dn, is non-NULL. Otherwise, of_mdio_find_bus(dn)
would not have been able to find the bus behind "brcm,unimac-mdio".
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The bcm_sf2 driver does something strange. Instead of calling
of_mdiobus_register() with an OF node argument, it manually assigns the
bus->dev->of_node and then calls the non-OF mdiobus_register(). This
circumvents some code from __of_mdiobus_register() from running, which
sets the auto-scan mask, parses some device tree properties, etc.
I'm going to go out on a limb and say that the OF node isn't, in fact,
needed at all, and can be removed. The MDIO diversion as initially
implemented in commit 461cd1b03e32 ("net: dsa: bcm_sf2: Register our
slave MDIO bus") looked quite different than it is now, after commit
771089c2a485 ("net: dsa: bcm_sf2: Ensure that MDIO diversion is used").
Initially, it made sense, as bcm_sf2 was registering another set of
driver ops for the "brcm,unimac-mdio" OF node. But now, it deletes all
phandles, which makes "phy-handle"s unable to find PHYs, which means
that it always goes through the OF-unaware dsa_user_phy_connect().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Accessed either through priv->dev or ds->dev, it is the same device
structure. Keep a single variable which holds a reference to it, and use
it consistently.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
__of_mdiobus_register() already calls __mdiobus_register() if the
OF node provided as argument is NULL. We can take advantage of that
and simplify the 2 code path, calling devm_of_mdiobus_register() only
once for both cases.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To simplify reasoning about why the DSA framework provides the
ds->user_mii_bus functionality, drivers should only use it if they
need to. The qca8k driver appears to also use it simply as storage
for a pointer, which is not a good enough reason to make the core
much more difficult to follow.
ds->user_mii_bus is useful for only 2 cases:
1. The driver probes on platform_data (no OF)
2. The driver probes on OF, but there is no OF node for the MDIO bus.
It is unclear if case (1) is supported with qca8k. It might not be:
the driver might crash when of_device_get_match_data() returns NULL
and then it dereferences priv->info without NULL checking.
Anyway, let us limit the ds->user_mii_bus usage only to the above cases,
and not assign it when an OF node is present.
The bus->phy_mask assignment follows along with the movement, because
__of_mdiobus_register() overwrites this bus field anyway. The value set
by the driver only matters for the non-OF code path.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the driver calls the non-OF devm_mdiobus_register() rather
than devm_of_mdiobus_register() for this case, but it seems to rather
be a confusing coincidence, and not a real use case that needs to be
supported.
If the device tree says status = "disabled" for the MDIO bus, we
shouldn't need an MDIO bus at all. Instead, just exit as early as
possible and do not call any MDIO API.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
of_get_child_by_name() gives us an OF node with an elevated refcount,
which should be dropped when we're done with it. This is so that,
if (of_node_check_flag(node, OF_DYNAMIC)) is true, the node's memory can
eventually be freed.
There are 2 distinct paths to be considered in qca8k_mdio_register():
- devm_of_mdiobus_register() succeeds: since commit 3b73a7b8ec38 ("net:
mdio_bus: add refcounting for fwnodes to mdiobus"), the MDIO core
treats this well.
- devm_of_mdiobus_register() or anything up to that point fails: it is
the duty of the qca8k driver to release the OF node.
This change addresses the second case by making sure that the OF node
reference is not leaked.
The "mdio" node may be NULL, but of_node_put(NULL) is safe.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the "lantiq,xrx200-mdio" child has status = "disabled", the MDIO bus
creation should be avoided. Use of_device_is_available() to check for
that, and take advantage of 2 facts:
- of_device_is_available(NULL) returns false
- of_node_put(NULL) is a no-op
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This driver does not need any of the functionalities that make
ds->user_mii_bus special. Those use cases are listed here:
https://lore.kernel.org/netdev/20231221174746.hylsmr3f7g5byrsi@skbuf/
It just makes use of ds->user_mii_bus only as storage for its own MDIO
bus, which otherwise has no connection to the framework. This is because:
- the gswip driver only probes on OF: it fails if of_device_get_match_data()
returns NULL
- when the child OF node of the MDIO bus is absent, no MDIO bus is
registered at all, not even by the DSA framework. In order for that to
have happened, the gswip driver would have needed to provide
->phy_read() and ->phy_write() in struct dsa_switch_ops, which it does
not.
We can break the connection between the gswip driver and the DSA
framework and still preserve the same functionality.
Since commit 3b73a7b8ec38 ("net: mdio_bus: add refcounting for fwnodes
to mdiobus"), MDIO buses take ownership of the OF node handled to them,
and release it on their own. The gswip driver no longer needs to do
this.
Combine that with devres, and we no longer need to keep track of
anything for teardown purposes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
__of_mdiobus_register(), called right next, overwrites the phy_mask
we just configured on the bus, so this is redundant and confusing.
Delete it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The field's name isn't clear enough. Rename it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The OPP core finds the eventual frequency to set with the help of
clk_round_rate() and the same was earlier getting passed to _set_opp()
and that's what would get configured.
The commit 1efae8d2e777 ("OPP: Make dev_pm_opp_set_opp() independent of
frequency") mistakenly changed that. Fix it.
Fixes: 1efae8d2e777 ("OPP: Make dev_pm_opp_set_opp() independent of frequency")
Cc: v5.18+ <stable@vger.kernel.org> # v6.0+
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Move this to a more relevant place in the file. No functional changes.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
AC5/X/IM SOCs has a variant of the Xenon eMMC controller,
in which only 31-bit of addressing pass from the controller
on the AXI bus.
Since we cannot guarantee that only buffers from the first 2GB
of memory will reach the driver, the driver is configured for
SDMA mode, without 64-bit mode, overriding the DMA mask to 34-bit
to support the DDR memory mapping, which starts at offset 8GB.
Signed-off-by: Elad Nachman <enachman@marvell.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240104173033.2836110-1-enachman@marvell.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
74165b0 shall use a new sdio controller core version which
requires a different reset sequence. For core reset we use
sdhci_reset. For CMD and/or DATA reset added a new function
to also enable SDHCI clocks SDHCI_CLOCK_CARD_EN
SDHCI_CLOCK_INT_EN along with the SDHCI_RESET_CMD and/or
SDHCI_RESET_DATA fields.
Signed-off-by: Kamal Dasu <kdasu@broadcom.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240103222338.31447-3-kamal.dasu@broadcom.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Turns out that one of the ways that Nvidia's driver handles the pre-LT
timeout for eDP panels is by providing a retry timeout in their link
training callbacks that we're expected to wait for. Up until now we didn't
pay any attention to this parameter.
So, start honoring the timeout if link training fails - and retry up to 3
times. The "3 times" bit comes from OpenRM's link training code.
[airlied: this fixes the panel on one of my laptops]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-12-airlied@gmail.com
|
|
There is a deadlock between the irq and fctx locks,
the irq handling takes irq then fctx lock
the fence signalling takes fctx then irq lock
This splits the fence signalling path so the code that hits
the irq lock is done in a separate work queue.
This seems to fix crashes/hangs when using nouveau gsp with
i915 primary GPU.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-11-airlied@gmail.com
|
|
Fixes a memory leak seen with kmemleak.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-10-airlied@gmail.com
|
|
It looks like for some messages the upper layers need to get access to the
results of the message so we can interpret it.
Rework the ctrl push interface to not free things and cleanup properly
whereever it errors out.
Requested-by: Lyude
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-9-airlied@gmail.com
|
|
This should let the upper layers retry as needed on EAGAIN.
There may be other values we will care about in the future, but
this covers our present needs.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-8-airlied@gmail.com
|
|
Currently we get an error from ACPI because both of these arguments expect
a single argument, and we don't provide one. I'm not totally clear on what
that argument does, but we're able to find the missing value from
_acpiCacheMethodData() in src/kernel/platform/acpi_common.c in nvidia's
driver. So, let's add that - which doesn't get eDP displays to power on
quite yet, but gets rid of the argument warning at least.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-7-airlied@gmail.com
|
|
This was being leaked.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-6-airlied@gmail.com
|
|
This fixes a memory leak for the acpi dod object.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-5-airlied@gmail.com
|
|
This func ptr here is normally static allocation, but gsp r535
uses a dynamic pointer, so we need to handle that better.
This fixes a crash with GSP when you use config=disp=0 to avoid
disp problems.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-4-airlied@gmail.com
|
|
These were leftover debug, if we need to bring them back do so
for debugging later.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-3-airlied@gmail.com
|
