| Age | Commit message (Collapse) | Author |
|---|
|
Replace opencoded masking and shifting, with BIT(), GENMASK(),
FIELD_GET() and FIELD_PREP() macros.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The patch moves the bitfields of the PCR register near the macro that
defines its offset, just like for all the other registers.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The previous setting did not take into account the CSTN mode.
For the H_WAIT_2 bitfield (bits 0-7) of the LCDC Horizontal Configuration
Register (LCDCR), the IMX25RM manual states that:
In TFT mode, it specifies the number of SCLK periods between the end of
HSYNC and the beginning of OE signal, and the total delay time equals
(H_WAIT_2 + 3) of SCLK periods.
In CSTN mode, it specifies the number of SCLK periods between the end of
HSYNC and the first display data in each line, and the total delay time
equals (H_WAIT_2 + 2) of SCLK periods.
The patch handles both cases.
Fixes: 4e47382fbca9 ("fbdev: imxfb: warn about invalid left/right margin")
Fixes: 7e8549bcee00 ("imxfb: Fix margin settings")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Add machine variable capacity information to /proc/sysinfo.
- Limit the waste of page tables and always align vmalloc area size and
base address on segment boundary.
- Fix a memory leak when an attempt to register interruption sub class
(ISC) for the adjunct-processor (AP) guest failed.
- Reset response code AP_RESPONSE_INVALID_GISA to understandable by
guest AP_RESPONSE_INVALID_ADDRESS in response to a failed
interruption sub class (ISC) registration attempt.
- Improve reaction to adjunct-processor (AP)
AP_RESPONSE_OTHERWISE_CHANGED response code when enabling interrupts
on behalf of a guest.
- Fix incorrect sysfs 'status' attribute of adjunct-processor (AP)
queue device bound to the vfio_ap device driver when the mediated
device is attached to a guest, but the queue device is not passed
through.
- Rework struct ap_card to hold the whole adjunct-processor (AP) card
hardware information. As result, all the ugly bit checks are replaced
by simple evaluations of the required bit fields.
- Improve handling of some weird scenarios between service element (SE)
host and SE guest with adjunct-processor (AP) pass-through support.
- Change local_ctl_set_bit() and local_ctl_clear_bit() so they return
the previous value of the to be changed control register. This is
useful if a bit is only changed temporarily and the previous content
needs to be restored.
- The kernel starts with machine checks disabled and is expected to
enable it once trap_init() is called. However the implementation
allows machine checks early. Consistently enable it in trap_init()
only.
- local_mcck_disable() and local_mcck_enable() assume that machine
checks are always enabled. Instead implement and use
local_mcck_save() and local_mcck_restore() to disable machine checks
and restore the previous state.
- Modification of floating point control (FPC) register of a traced
process using ptrace interface may lead to corruption of the FPC
register of the tracing process. Fix this.
- kvm_arch_vcpu_ioctl_set_fpu() allows to set the floating point
control (FPC) register in vCPU, but may lead to corruption of the FPC
register of the host process. Fix this.
- Use READ_ONCE() to read a vCPU floating point register value from the
memory mapped area. This avoids that, depending on code generation, a
different value is tested for validity than the one that is used.
- Get rid of test_fp_ctl(), since it is quite subtle to use it
correctly. Instead copy a new floating point control register value
into its save area and test the validity of the new value when
loading it.
- Remove superfluous save_fpu_regs() call.
- Remove s390 support for ARCH_WANTS_DYNAMIC_TASK_STRUCT. All machines
provide the vector facility since many years and the need to make the
task structure size dependent on the vector facility does not exist.
- Remove the "novx" kernel command line option, as the vector code runs
without any problems since many years.
- Add the vector facility to the z13 architecture level set (ALS). All
hypervisors support the vector facility since many years. This allows
compile time optimizations of the kernel.
- Get rid of MACHINE_HAS_VX and replace it with cpu_has_vx(). As
result, the compiled code will have less runtime checks and less
code.
- Convert pgste_get_lock() and pgste_set_unlock() ASM inlines to C.
- Convert the struct subchannel spinlock from pointer to member.
* tag 's390-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (24 commits)
Revert "s390: update defconfigs"
s390/cio: make sch->lock spinlock pointer a member
s390: update defconfigs
s390/mm: convert pgste locking functions to C
s390/fpu: get rid of MACHINE_HAS_VX
s390/als: add vector facility to z13 architecture level set
s390/fpu: remove "novx" option
s390/fpu: remove ARCH_WANTS_DYNAMIC_TASK_STRUCT support
KVM: s390: remove superfluous save_fpu_regs() call
s390/fpu: get rid of test_fp_ctl()
KVM: s390: use READ_ONCE() to read fpc register value
KVM: s390: fix setting of fpc register
s390/ptrace: handle setting of fpc register correctly
s390/nmi: implement and use local_mcck_save() / local_mcck_restore()
s390/nmi: consistently enable machine checks in trap_init()
s390/ctlreg: return old register contents when changing bits
s390/ap: handle outband SE bind state change
s390/ap: store TAPQ hwinfo in struct ap_card
s390/vfio-ap: fix sysfs status attribute for AP queue devices
s390/vfio-ap: improve reaction to response code 07 from PQAP(AQIC) command
...
|
|
Pull header cleanups from Kent Overstreet:
"The goal is to get sched.h down to a type only header, so the main
thing happening in this patchset is splitting out various _types.h
headers and dependency fixups, as well as moving some things out of
sched.h to better locations.
This is prep work for the memory allocation profiling patchset which
adds new sched.h interdepencencies"
* tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (51 commits)
Kill sched.h dependency on rcupdate.h
kill unnecessary thread_info.h include
Kill unnecessary kernel.h include
preempt.h: Kill dependency on list.h
rseq: Split out rseq.h from sched.h
LoongArch: signal.c: add header file to fix build error
restart_block: Trim includes
lockdep: move held_lock to lockdep_types.h
sem: Split out sem_types.h
uidgid: Split out uidgid_types.h
seccomp: Split out seccomp_types.h
refcount: Split out refcount_types.h
uapi/linux/resource.h: fix include
x86/signal: kill dependency on time.h
syscall_user_dispatch.h: split out *_types.h
mm_types_task.h: Trim dependencies
Split out irqflags_types.h
ipc: Kill bogus dependency on spinlock.h
shm: Slim down dependencies
workqueue: Split out workqueue_types.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add incremental lskcipher/skcipher processing
Algorithms:
- Remove SHA1 from drbg
- Remove CFB and OFB
Drivers:
- Add comp high perf mode configuration in hisilicon/zip
- Add support for 420xx devices in qat
- Add IAA Compression Accelerator driver"
* tag 'v6.8-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (172 commits)
crypto: iaa - Account for cpu-less numa nodes
crypto: scomp - fix req->dst buffer overflow
crypto: sahara - add support for crypto_engine
crypto: sahara - remove error message for bad aes request size
crypto: sahara - remove unnecessary NULL assignments
crypto: sahara - remove 'active' flag from sahara_aes_reqctx struct
crypto: sahara - use dev_err_probe()
crypto: sahara - use devm_clk_get_enabled()
crypto: sahara - use BIT() macro
crypto: sahara - clean up macro indentation
crypto: sahara - do not resize req->src when doing hash operations
crypto: sahara - fix processing hash requests with req->nbytes < sg->length
crypto: sahara - improve error handling in sahara_sha_process()
crypto: sahara - fix wait_for_completion_timeout() error handling
crypto: sahara - fix ahash reqsize
crypto: sahara - handle zero-length aes requests
crypto: skcipher - remove excess kerneldoc members
crypto: shash - remove excess kerneldoc members
crypto: qat - generate dynamically arbiter mappings
crypto: qat - add support for ring pair level telemetry
...
|
|
Before commit 7839d0078e0d ("PM: sleep: Fix possible deadlocks in core
system-wide PM code"), the resume of devices that were allowed to resume
asynchronously was scheduled before starting the resume of the other
devices, so the former did not have to wait for the latter unless
functional dependencies were present.
Commit 7839d0078e0d removed that optimization in order to address a
correctness issue, but it can be restored with the help of a new device
power management flag, so do that now.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Just a couple fixes and no new features"
* tag 'tpmdd-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: cr50: fix kernel-doc warning and spelling
tpm: nuvoton: Use i2c_get_match_data()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Introduce the param_unknown_fn type and other clean ups (Andy
Shevchenko)
- Various __counted_by annotations (Christophe JAILLET, Gustavo A. R.
Silva, Kees Cook)
- Add KFENCE test to LKDTM (Stephen Boyd)
- Various strncpy() refactorings (Justin Stitt)
- Fix qnx4 to avoid writing into the smaller of two overlapping buffers
- Various strlcpy() refactorings
* tag 'hardening-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
qnx4: Use get_directory_fname() in qnx4_match()
qnx4: Extract dir entry filename processing into helper
atags_proc: Add __counted_by for struct buffer and use struct_size()
tracing/uprobe: Replace strlcpy() with strscpy()
params: Fix multi-line comment style
params: Sort headers
params: Use size_add() for kmalloc()
params: Do not go over the limit when getting the string length
params: Introduce the param_unknown_fn type
lkdtm: Add kfence read after free crash type
nvme-fc: replace deprecated strncpy with strscpy
nvdimm/btt: replace deprecated strncpy with strscpy
nvme-fabrics: replace deprecated strncpy with strscpy
drm/modes: replace deprecated strncpy with strscpy_pad
afs: Add __counted_by for struct afs_acl and use struct_size()
VMCI: Annotate struct vmci_handle_arr with __counted_by
i40e: Annotate struct i40e_qvlist_info with __counted_by
HID: uhid: replace deprecated strncpy with strscpy
samples: Replace strlcpy() with strscpy()
SUNRPC: Replace strlcpy() with strscpy()
|
|
Pull xfs updates from Chandan Babu:
"New features/functionality:
- Online repair:
- Reserve disk space for online repairs
- Fix misinteraction between the AIL and btree bulkloader because
of which the bulk load fails to queue a buffer for writeback if
it happens to be on the AIL list
- Prevent transaction reservation overflows when reaping blocks
during online repair
- Whenever possible, bulkloader now copies multiple records into
a block
- Support repairing of
1. Per-AG free space, inode and refcount btrees
2. Ondisk inodes
3. File data and attribute fork mappings
- Verify the contents of
1. Inode and data fork of realtime bitmap file
2. Quota files
- Introduce MF_MEM_PRE_REMOVE. This will be used to notify tasks
about a pmem device being removed
Bug fixes:
- Fix memory leak of recovered attri intent items
- Fix UAF during log intent recovery
- Fix realtime geometry integer overflows
- Prevent scrub from live locking in xchk_iget
- Prevent fs shutdown when removing files during low free disk space
- Prevent transaction reservation overflow when extending an RT
device
- Prevent incorrect warning from being printed when extending a
filesystem
- Fix an off-by-one error in xreap_agextent_binval
- Serialize access to perag radix tree during deletion operation
- Fix perag memory leak during growfs
- Allow allocation of minlen realtime extent when the maximum sized
realtime free extent is minlen in size
Cleanups:
- Remove duplicate boilerplate code spread across functionality
associated with different log items
- Cleanup resblks interfaces
- Pass defer ops pointer to defer helpers instead of an enum
- Initialize di_crc in xfs_log_dinode to prevent KMSAN warnings
- Use static_assert() instead of BUILD_BUG_ON_MSG() to validate size
of structures and structure member offsets. This is done in order
to be able to share the code with userspace
- Move XFS documentation under a new directory specific to XFS
- Do not invoke deferred ops' ->create_done callback if the deferred
operation does not have an intent item associated with it
- Remove duplicate inclusion of header files from scrub/health.c
- Refactor Realtime code
- Cleanup attr code"
* tag 'xfs-6.8-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (123 commits)
xfs: use the op name in trace_xlog_intent_recovery_failed
xfs: fix a use after free in xfs_defer_finish_recovery
xfs: turn the XFS_DA_OP_REPLACE checks in xfs_attr_shortform_addname into asserts
xfs: remove xfs_attr_sf_hdr_t
xfs: remove struct xfs_attr_shortform
xfs: use xfs_attr_sf_findname in xfs_attr_shortform_getvalue
xfs: remove xfs_attr_shortform_lookup
xfs: simplify xfs_attr_sf_findname
xfs: move the xfs_attr_sf_lookup tracepoint
xfs: return if_data from xfs_idata_realloc
xfs: make if_data a void pointer
xfs: fold xfs_rtallocate_extent into xfs_bmap_rtalloc
xfs: simplify and optimize the RT allocation fallback cascade
xfs: reorder the minlen and prod calculations in xfs_bmap_rtalloc
xfs: remove XFS_RTMIN/XFS_RTMAX
xfs: remove rt-wrappers from xfs_format.h
xfs: factor out a xfs_rtalloc_sumlevel helper
xfs: tidy up xfs_rtallocate_extent_exact
xfs: merge the calls to xfs_rtallocate_range in xfs_rtallocate_block
xfs: reflow the tail end of xfs_rtallocate_extent_block
...
|
|
On some Meteor Lake platforms, maximum one core turbo frequency is not
observed. During hybrid performance to frequency conversion, the maximum
frequency is 100 MHz less. This results in requesting maximum frequency
100 MHz less.
For example when the max one core turbo is 4.9 GHz:
MSR HWP_CAPABILITIES shows highest performance ratio for P-core is 0x3E.
With the current scaling factor of 78741 (1.27x for converting frequency
to performance) results in max frequency of 4.8 GHz. This results in
capping the max scaling frequency as 4.8 GHz, which is 100 MHz less than
the desired.
Add capability to define per CPU model specific scaling factor and define
scaling factor of 80000 (1.25x for converting frequency to performance for
P-cores) for Meteor Lake.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Debug message adjustment, subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The ti_am335x_tscadc is specific to some TI SoCs, update
the dependencies for those SoCs and compile testing.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20231220155643.445849-1-pbrobinson@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The sysctrl driver was looking for an instance of the PM2301
charger but this has been deleted from the kernel and is not
used with the U8500 systems any more. Drop the string.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231214-ab8500-sysctrl-oneliner-v1-1-fd78a15c0b2f@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Document nested struct members with full names as described in
Documentation/doc-guide/kernel-doc.rst.
i915_perf_types.h:341: warning: Excess struct member 'ptr_lock' description in 'i915_perf_stream'
i915_perf_types.h:341: warning: Excess struct member 'head' description in 'i915_perf_stream'
i915_perf_types.h:341: warning: Excess struct member 'tail' description in 'i915_perf_stream'
3 warnings as Errors
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231226195432.10891-4-rdunlap@infradead.org
(cherry picked from commit aa253baca534357e033bd29b074ce1eade2a9362)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Document nested struct members with full names as described in
Documentation/doc-guide/kernel-doc.rst.
intel_guc.h:305: warning: Excess struct member 'lock' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_ids' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'num_guc_ids' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_ids_bitmap' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_id_list' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_ids_in_use' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'destroyed_contexts' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'destroyed_worker' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'reset_fail_worker' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'reset_fail_mask' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'sched_disable_delay_ms' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'sched_disable_gucid_threshold' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'lock' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'gt_stamp' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'ping_delay' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'work' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'shift' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'last_stat_jiffies' description in 'intel_guc'
18 warnings as Errors
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231226195432.10891-3-rdunlap@infradead.org
(cherry picked from commit e4cf1a70fad3e2107503e99cfe9cc0c9cba19dad)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Document nested struct members with full names as described in
Documentation/doc-guide/kernel-doc.rst.
intel_gsc.h:34: warning: Excess struct member 'gem_obj' description in 'intel_gsc'
Also add missing field member descriptions.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231228234946.12405-1-rdunlap@infradead.org
(cherry picked from commit cd1d91115ff1929ec346d85f512ef260ddf8131e)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Document nested struct members with full names as described in
Documentation/doc-guide/kernel-doc.rst.
i915_gem_context_types.h:420: warning: Excess struct member 'lock' description in 'i915_gem_context'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231226195432.10891-1-rdunlap@infradead.org
(cherry picked from commit 7353c3d7c15017140a8b984e41f94be0bf535e73)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
layout of configuration ROM
As the last part of support for legacy layout of configuration ROM, this
commit traverses vendor directory as well as root directory when
constructing modalias for unit device. The change brings loss of backward
compatibility since it can fill model field ('mo') which is 0 at current
implementation in the case. However, we can be optimistic against
regression for unit drivers in kernel, due to some points:
1. ALSA drivers for audio and music units use the model fields to match
device, however all of supported devices does not have such legacy
layout.
2. the other unit drivers (e.g. sbp2) does not use the model field to
match device.
The rest of concern is user space application. The most of applications
just take care of node device and does not use the modalias of unit
device, thus the change does not affect to them. But systemd project is
known to get affects from the change since it includes hwdb to take udev
to configure fw character device conveniently. I have a plan to work for
systemd so that the access permission of character device could be kept
across the change.
Suggested-by: Adam Goldman <adamg@pobox.com>
Link: https://lore.kernel.org/r/20231221134849.603857-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
Use correct helper for getting max DSC bpc supported by the source.
Fixes: 1c56e9a39833 ("drm/i915/dp: Get optimal link config to have best compressed bpp")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213091632.431557-3-ankit.k.nautiyal@intel.com
(cherry picked from commit cd7b0b2dd3d9fecc6057c07b40e8087db2f9f71a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
intel_wakeref_t is supposed to be a mostly opaque cookie to its
users. It should only be checked for being non-zero and set to
zero. Debug logging its actual value is meaningless. Switch to just
debug logging whether the async_put_wakeref is non-zero.
The issue dates back to much earlier than
commit b49e894c3fd8 ("drm/i915: Replace custom intel runtime_pm tracker
with ref_tracker library"), but this is the one that brought about a
build failure due to the printf format.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20240102111222.2db11208@canb.auug.org.au
Fixes: b49e894c3fd8 ("drm/i915: Replace custom intel runtime_pm tracker with ref_tracker library")
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104164600.783371-1-jani.nikula@intel.com
(cherry picked from commit de06b42edc5bf05aefbb7e2f59475d6022ed57e1)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
MST connectors don't have a static attached encoder, as their encoder
can change depending on the pipe they use; so the encoder for an MST
connector can't be retrieved using intel_dp_attached_encoder() (which
may return NULL for MST). Most of the PSR debugfs entries depend on a
static connector -> encoder mapping which is only true for eDP and SST
DP connectors and not for MST. These debugfs entries were enabled for
MST connectors as well recently to provide PR information for them, but
handling MST connectors needs more changes.
Fix this by not adding for now the PSR entries on MST connectors. To
make things more uniform add the entries for SST connectors on all
platforms, not just on platforms supporting DP2.0.
v2:
- Keep adding the entries for SST connectors. (Jouni)
- Add a TODO: comment for MST support.
Fixes: ef75c25e8fed ("drm/i915/panelreplay: Debugfs support for panel replay")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9850
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240103152609.2434100-1-imre.deak@intel.com
(cherry picked from commit 9b0b61c5bc08e1aa55a0c1e7cda28f952b2d02cc)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Add pll selection check for C20 as well as
clock state verification0. We have been relying
on sw state to select A or B pll's. This is incorrect
as the hw might see this selection differently. This
patch fixes this shortcoming by reading pll selection
for both sw and hw states and compares if these two
selections match.
Fixes: 59be90248b42 ("drm/i915/mtl: C20 state verification")
v2: reword commit message and include fix to a
original commit (Imre)
Compare pll selection (Jani)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240102115741.118525-2-mika.kahola@intel.com
(cherry picked from commit f4304beadd88d074333b23fdc7f35d00ee763e14)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
DO NOT access the underlying struct page of an sg table exported
by DMA-buf in dmabuf_imp_to_refs(), this is not allowed.
Please see drivers/dma-buf/dma-buf.c:mangle_sg_table() for details.
Fortunately, here (for special Xen device) we can avoid using
pages and calculate gfns directly from dma addresses provided by
the sg table.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://lore.kernel.org/r/20240107103426.2038075-1-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Driver Changes:
- Eliminate use of kmap_atomic() in i915 (Zhao)
- Add Wa_14019877138 for DG2 (Haridhar)
- Static checker and spelling fixes (Colin, Karthik, Randy)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZXxCibZZQqlqhDN3@jlahtine-mobl.ger.corp.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- a new feature that adds APIs for managing devices introducing a set
of helper functions which allow devices (internally a struct
kunit_device) to be created and managed by KUnit.
These devices will be automatically unregistered on test exit. These
helpers can either use a user-provided struct device_driver, or have
one automatically created and managed by KUnit. In both cases, the
device lives on a new kunit_bus.
- changes to switch drm/tests to use kunit devices
- several fixes and enhancements to attribute feature
- changes to reorganize deferred action function introducing
KUNIT_DEFINE_ACTION_WRAPPER
- new feature adds ability to run tests after boot using debugfs
- fixes and enhancements to string-stream-test:
- parse ERR_PTR in string_stream_destroy()
- unchecked dereference in bug fix in debugfs_print_results()
- handling errors from alloc_string_stream()
- NULL-dereference bug fix in kunit_init_suite()
* tag 'linux_kselftest-kunit-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (27 commits)
kunit: Fix some comments which were mistakenly kerneldoc
kunit: Protect string comparisons against NULL
kunit: Add example of kunit_activate_static_stub() with pointer-to-function
kunit: Allow passing function pointer to kunit_activate_static_stub()
kunit: Fix NULL-dereference in kunit_init_suite() if suite->log is NULL
kunit: Reset test->priv after each param iteration
kunit: Add example for using test->priv
drm/tests: Switch to kunit devices
ASoC: topology: Replace fake root_device with kunit_device in tests
overflow: Replace fake root_device with kunit_device
fortify: test: Use kunit_device
kunit: Add APIs for managing devices
Documentation: Add debugfs docs with run after boot
kunit: add ability to run tests after boot using debugfs
kunit: add is_init test attribute
kunit: add example suite to test init suites
kunit: add KUNIT_INIT_TABLE to init linker section
kunit: move KUNIT_TABLE out of INIT_DATA
kunit: tool: add test for parsing attributes
kunit: tool: fix parsing of test attributes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Fix a syzbot reported issue in efivarfs where concurrent accesses to
the file system resulted in list corruption
- Add support for accessing EFI variables via the TEE subsystem (and a
trusted application in the secure world) instead of via EFI runtime
firmware running in the OS's execution context
- Avoid linker tricks to discover the image base on LoongArch
* tag 'efi-next-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: memmap: fix kernel-doc warnings
efi/loongarch: Directly position the loaded image file
efivarfs: automatically update super block flag
efi: Add tee-based EFI variable driver
efi: Add EFI_ACCESS_DENIED status code
efi: expose efivar generic ops register function
efivarfs: Move efivarfs list into superblock s_fs_info
efivarfs: Free s_fs_info on unmount
efivarfs: Move efivar availability check into FS context init
efivarfs: force RO when remounting if SetVariable is not supported
|
|
Pull IPMI updates from Corey Minyard:
"Some small fixes. Nothing big, just aligning things with some changes"
* tag 'for-linus-6.8-1' of https://github.com/cminyard/linux-ipmi:
ipmi: Remove usage of the deprecated ida_simple_xx() API
ipmi: Use regspacings passed as a module parameter
ipmi: si: Use device_get_match_data()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Intel PMC / PMT / TPMI / uncore-freq / vsec improvements and new
platform support
- AMD PMC / PMF improvements and new platform support
- AMD ACPI based Wifi band RFI mitigation feature (WBRF)
- WMI bus driver cleanups and improvements (Armin Wolf)
- acer-wmi Predator PHN16-71 support
- New Silicom network appliance EC LEDs / GPIOs driver
* tag 'platform-drivers-x86-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (96 commits)
platform/x86/amd/pmc: Modify SMU message port for latest AMD platform
platform/x86/amd/pmc: Add 1Ah family series to STB support list
platform/x86/amd/pmc: Add idlemask support for 1Ah family
platform/x86/amd/pmc: call amd_pmc_get_ip_info() during driver probe
platform/x86/amd/pmc: Add VPE information for AMDI000A platform
platform/x86/amd/pmc: Send OS_HINT command for AMDI000A platform
platform/x86/amd/pmf: Return a status code only as a constant in two functions
platform/x86/amd/pmf: Return directly after a failed apmf_if_call() in apmf_sbios_heartbeat_notify()
platform/x86: wmi: linux/wmi.h: fix Excess kernel-doc description warning
platform/x86/intel/pmc: Add missing extern
platform/x86/intel/pmc/lnl: Add GBE LTR ignore during suspend
platform/x86/intel/pmc/arl: Add GBE LTR ignore during suspend
platform/x86: intel-uncore-freq: Add additional client processors
platform/x86: Remove "X86 PLATFORM DRIVERS - ARCH" from MAINTAINERS
platform/x86: hp-bioscfg: Removed needless asm-generic
platform/x86/intel/pmc: Add Lunar Lake M support to intel_pmc_core driver
platform/x86/intel/pmc: Add Arrow Lake S support to intel_pmc_core driver
platform/x86/intel/pmc: Add ssram_init flag in PMC discovery in Meteor Lake
platform/x86/intel/pmc: Move common code to core.c
platform/x86/intel/pmc: Add PSON residency counter for Alder Lake
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform firmware updates from Tzung-Bi Shih:
- Fix an invalid address access.
- Use .remove_new() for converting the callback to return void
* tag 'tag-chrome-platform-firmware-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
firmware: coreboot: Convert to platform remove callback returning void
firmware: coreboot: framebuffer: Avoid invalid zero physical address
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
- Implement quickselect for median in cros-ec-sensorhub
- Fix an out of boundary array access in cros-ec-vbc
- Cleanups and fix typos
* tag 'tag-chrome-platform-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome/wilco_ec: Remove usage of the deprecated ida_simple_xx() API
platform/chrome: cros_ec_vbc: Fix -Warray-bounds warnings
platform/chrome: sensorhub: Implement quickselect for median calculation
platform/chrome: sensorhub: Fix typos
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add support for new processors (Sierra Forest, Grand Ridge and
Meteor Lake) to the intel_idle driver, make intel_pstate run on
Emerald Rapids without HWP support and adjust it to utilize EPP values
supplied by the platform firmware, fix issues, clean up code and
improve documentation.
The most significant fix addresses deadlocks in the core system-wide
resume code that occur if async_schedule_dev() attempts to run its
argument function synchronously (for example, due to a memory
allocation failure). It rearranges the code in question which may
increase the system resume time in some cases, but this basically is a
removal of a premature optimization. That optimization will be added
back later, but properly this time.
Specifics:
- Add support for the Sierra Forest, Grand Ridge and Meteorlake SoCs
to the intel_idle cpuidle driver (Artem Bityutskiy, Zhang Rui)
- Do not enable interrupts when entering idle in the haltpoll cpuidle
driver (Borislav Petkov)
- Add Emerald Rapids support in no-HWP mode to the intel_pstate
cpufreq driver (Zhenguo Yao)
- Use EPP values programmed by the platform firmware as balanced
performance ones by default in intel_pstate (Srinivas Pandruvada)
- Add a missing function return value check to the SCMI cpufreq
driver to avoid unexpected behavior (Alexandra Diupina)
- Fix parameter type warning in the armada-8k cpufreq driver (Gregory
CLEMENT)
- Rework trans_stat_show() in the devfreq core code to avoid buffer
overflows (Christian Marangi)
- Synchronize devfreq_monitor_[start/stop] so as to prevent a timer
list corruption from occurring when devfreq governors are switched
frequently (Mukesh Ojha)
- Fix possible deadlocks in the core system-wide PM code that occur
if device-handling functions cannot be executed asynchronously
during resume from system-wide suspend (Rafael J. Wysocki)
- Clean up unnecessary local variable initializations in multiple
places in the hibernation code (Wang chaodong, Li zeming)
- Adjust core hibernation code to avoid missing wakeup events that
occur after saving an image to persistent storage (Chris Feng)
- Update hibernation code to enforce correct ordering during image
compression and decompression (Hongchen Zhang)
- Use kmap_local_page() instead of kmap_atomic() in copy_data_page()
during hibernation and restore (Chen Haonan)
- Adjust documentation and code comments to reflect recent tasks
freezer changes (Kevin Hao)
- Repair excess function parameter description warning in the
hibernation image-saving code (Randy Dunlap)
- Fix _set_required_opps when opp is NULL (Bryan O'Donoghue)
- Use device_get_match_data() in the OPP code for TI (Rob Herring)
- Clean up OPP level and other parts and call dev_pm_opp_set_opp()
recursively for required OPPs (Viresh Kumar)"
* tag 'pm-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits)
OPP: Rename 'rate_clk_single'
OPP: Pass rounded rate to _set_opp()
OPP: Relocate dev_pm_opp_sync_regulators()
PM: sleep: Fix possible deadlocks in core system-wide PM code
OPP: Move dev_pm_opp_icc_bw to internal opp.h
async: Introduce async_schedule_dev_nocall()
async: Split async_schedule_node_domain()
cpuidle: haltpoll: Do not enable interrupts when entering idle
OPP: Fix _set_required_opps when opp is NULL
OPP: The level field is always of unsigned int type
PM: hibernate: Repair excess function parameter description warning
PM: sleep: Remove obsolete comment from unlock_system_sleep()
cpufreq: intel_pstate: Add Emerald Rapids support in no-HWP mode
Documentation: PM: Adjust freezing-of-tasks.rst to the freezer changes
PM: hibernate: Use kmap_local_page() in copy_data_page()
intel_idle: add Sierra Forest SoC support
intel_idle: add Grand Ridge SoC support
PM / devfreq: Synchronize devfreq_monitor_[start/stop]
cpufreq: armada-8k: Fix parameter type warning
PM: hibernate: Enforce ordering during image compression/decompression
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add support for the D1/T113s THS controller to the sun8i driver
and a DT-based mechanism for platforms to indicate a preference to
reboot (instead of shutting down) on crossing a critical trip point,
fix issues, make other improvements (in the IPA governor, the Intel
HFI driver, the exynos driver and the thermal netlink interface among
other places) and clean up code.
One long-standing issue addressed here is that trip point crossing
notifications sent to user space might be unreliable due to the
incorrect handling of trip point hysteresis in the thermal core:
multiple notifications might be sent for the same event or there might
be events without any notification at all.
Specifics:
- Add dynamic thresholds for trip point crossing detection to prevent
trip point crossing notifications from being sent at incorrect
times or not at all in some cases (Rafael J. Wysocki)
- Fix synchronization issues related to the resume of thermal zones
during a system-wide resume and allow thermal zones to be resumed
concurrently (Rafael J. Wysocki)
- Modify the thermal zone unregistration to wait for the given zone
to go away completely before returning to the caller and rework the
sysfs interface for trip points on top of that (Rafael J. Wysocki)
- Fix a possible NULL pointer dereference in thermal zone
registration error path (Rafael J. Wysocki)
- Clean up the IPA thermal governor and modify it (with the help of a
new governor callback) to avoid allocating and freeing memory every
time its throttling callback is invoked (Lukasz Luba)
- Make the IPA thermal governor handle thermal instance weight
changes via sysfs correctly (Lukasz Luba)
- Update the thermal netlink code to avoid sending messages if there
are no recipients (Stanislaw Gruszka)
- Convert Mediatek Thermal to the json-schema (Rafał Miłecki)
- Fix thermal DT bindings issue on Loongson (Binbin Zhou)
- Fix returning NULL instead of -ENODEV during thermal probe on
Loogsoon (Binbin Zhou)
- Add thermal DT binding for tsens on the SM8650 platform (Neil
Armstrong)
- Add reboot on the critical trip point crossing option feature
(Fabio Estevam)
- Use DEFINE_SIMPLE_DEV_PM_OPS do define PM functions for thermal
suspend/resume on AmLogic (Uwe Kleine-König)
- Add D1/T113s THS controller support to the Sun8i thermal control
driver (Maxim Kiselev)
- Fix example in the thermal DT binding for QCom SPMI (Johan Hovold)
- Fix compilation warning in the tmon utility (Florian Eckert)
- Add support for interrupt-based thermal configuration on Exynos
along with a set of related cleanups (Mateusz Majewski)
- Make the Intel HFI thermal driver enable an HFI instance (eg.
processor package) from its first online CPU and disable it when
the last CPU in it goes offline (Ricardo Neri)
- Fix a kernel-doc warning and a spello in the cpuidle_cooling
thermal driver (Randy Dunlap)
- Move the .get_temp() thermal zone callback presence check to the
thermal zone registration code (Daniel Lezcano)
- Use the for_each_trip() macro for trip points table walks in a few
places in the thermal core (Rafael J. Wysocki)
- Make all trip point updates (via sysfs as well as from the platform
firmware) trigger trip change notifications (Rafael J. Wysocki)
- Drop redundant code from the thermal core and make one function in
it take a const pointer argument (Rafael J. Wysocki)"
* tag 'thermal-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
thermal: trip: Constify thermal zone argument of thermal_zone_trip_id()
thermal: intel: hfi: Disable an HFI instance when all its CPUs go offline
thermal: intel: hfi: Enable an HFI instance from its first online CPU
thermal: intel: hfi: Refactor enabling code into helper functions
thermal/drivers/exynos: Use set_trips ops
thermal/drivers/exynos: Use BIT wherever possible
thermal/drivers/exynos: Split initialization of TMU and the thermal zone
thermal/drivers/exynos: Stop using the threshold mechanism on Exynos 4210
thermal/drivers/exynos: Simplify regulator (de)initialization
thermal/drivers/exynos: Handle devm_regulator_get_optional return value correctly
thermal/drivers/exynos: Wwitch from workqueue-driven interrupt handling to threaded interrupts
thermal/drivers/exynos: Drop id field
thermal/drivers/exynos: Remove an unnecessary field description
tools/thermal/tmon: Fix compilation warning for wrong format
dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Clean up examples
dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Fix example node names
thermal/drivers/sun8i: Add D1/T113s THS controller support
dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller
thermal: amlogic: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
thermal: amlogic: Make amlogic_thermal_disable() return void
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"From the new features standpoint, the most significant change here is
the addition of CSI-2 and MIPI DisCo for Imaging support to the ACPI
device enumeration code that will allow MIPI cameras to be enumerated
through the platform firmware on systems using ACPI.
Also significant is the switch-over to threaded interrupt handlers for
the ACPI SCI and the dedicated EC interrupt (on systems where the
former is not used) which essentially allows all ACPI code to run with
local interrupts enabled. That should improve responsiveness
significantly on systems where multiple GPEs are enabled and the
handling of one SCI involves many I/O address space accesses which
previously had to be carried out in one go with disabled interrupts on
the local CPU.
Apart from the above, the ACPI thermal zone driver will use the
Thermal fast Sampling Period (_TFP) object if available, which should
allow temperature changes to be followed more accurately on some
systems, the ACPI Notify () handlers can run on all CPUs (not just on
CPU0), which should generally speed up the processing of events
signaled through the ACPI SCI, and the ACPI power button driver will
trigger wakeup key events via the input subsystem (on systems where it
is a system wakeup device)
In addition to that, there are the usual bunch of fixes and cleanups.
Specifics:
- Add CSI-2 and DisCo for Imaging support to the ACPI device
enumeration code (Sakari Ailus, Rafael J. Wysocki)
- Adjust the cpufreq thermal reduction algorithm in the ACPI
processor driver for Tegra241 (Srikar Srimath Tirumala, Arnd
Bergmann)
- Make acpi_proc_quirk_mwait_check() x86-specific (Rafael J. Wysocki)
- Switch over ACPI to using a threaded interrupt handler for the SCI
(Rafael J. Wysocki)
- Allow ACPI Notify () handlers to run on all CPUs and clean up the
ACPI interface for deferred events processing (Rafael J. Wysocki)
- Switch over the ACPI EC driver to using a threaded handler for the
dedicated IRQ on systems without the EC GPE (Rafael J. Wysocki)
- Adjust code using ACPICA spinlocks and the ACPI EC driver spinlock
to keep local interrupts on (Rafael J. Wysocki)
- Adjust the USB4 _OSC handshake to correctly handle cases in which
certain types of OS control are denied by the platform (Mika
Westerberg)
- Correct and clean up the generic function for parsing ACPI
data-only tables with array structure (Yuntao Wang)
- Modify acpi_dev_uid_match() to support different types of its
second argument and adjust its users accordingly (Raag Jadav)
- Clean up code related to acpi_evaluate_reference() and ACPI device
lists (Rafael J. Wysocki)
- Use generic ACPI helpers for evaluating trip point temperature
objects in the ACPI thermal zone driver (Rafael J. Wysockii, Arnd
Bergmann)
- Add Thermal fast Sampling Period (_TFP) support to the ACPI thermal
zone driver (Jeff Brasen)
- Modify the ACPI LPIT table handling code to avoid u32
multiplication overflows in state residency computations (Nikita
Kiryushin)
- Drop an unused helper function from the ACPI backlight (video)
driver and add a clarifying comment to it (Hans de Goede)
- Update the ACPI backlight driver to avoid using uninitialized
memory in some cases (Nikita Kiryushin)
- Add ACPI backlight quirk for the Colorful X15 AT 23 laptop (Yuluo
Qiu)
- Add support for vendor-defined error types to the ACPI APEI error
injection code (Avadhut Naik)
- Adjust APEI to properly set MF_ACTION_REQUIRED on synchronous
memory failure events, so they are handled differently from the
asynchronous ones (Shuai Xue)
- Fix NULL pointer dereference check in the ACPI extlog driver
(Prarit Bhargava)
- Adjust the ACPI extlog driver to clear the Extended Error Log
status when RAS_CEC handled the error (Tony Luck)
- Add IRQ override quirks for some Infinity laptops and for TongFang
GMxXGxx (David McFarland, Hans de Goede)
- Clean up the ACPI NUMA code and fix it to ensure that fake_pxm is
not the same as one of the real pxm values (Yuntao Wang)
- Fix the fractional clock divider flags in the ACPI LPSS (Intel SoC)
driver so as to prevent miscalculation of the values in the clock
divider (Andy Shevchenko)
- Adjust comments in the ACPI watchdog driver to prevent kernel-doc
from complaining during documentation builds (Randy Dunlap)
- Make the ACPI button driver send wakeup key events to user space in
addition to power button events on systems that can be woken up by
the power button (Ken Xue)
- Adjust pnpacpi_parse_allocated_vendor() to use memcpy() on a full
structure field (Dmitry Antipov)"
* tag 'acpi-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (56 commits)
ACPI: resource: Add Infinity laptops to irq1_edge_low_force_override
ACPI: button: trigger wakeup key events
ACPI: resource: Add another DMI match for the TongFang GMxXGxx
ACPI: EC: Use a spin lock without disabing interrupts
ACPI: EC: Use a threaded handler for dedicated IRQ
ACPI: OSL: Use spin locks without disabling interrupts
ACPI: APEI: set memory failure flags as MF_ACTION_REQUIRED on synchronous events
ACPI: utils: Introduce helper for _DEP list lookup
ACPI: utils: Fix white space in struct acpi_handle_list definition
ACPI: utils: Refine acpi_handle_list_equal() slightly
ACPI: utils: Return bool from acpi_evaluate_reference()
ACPI: utils: Rearrange in acpi_evaluate_reference()
ACPI: arm64: export acpi_arch_thermal_cpufreq_pctg()
ACPI: extlog: Clear Extended Error Log status when RAS_CEC handled the error
ACPI: LPSS: Fix the fractional clock divider flags
ACPI: NUMA: Fix the logic of getting the fake_pxm value
ACPI: NUMA: Optimize the check for the availability of node values
ACPI: NUMA: Remove unnecessary check in acpi_parse_gi_affinity()
ACPI: watchdog: fix kernel-doc warnings
ACPI: extlog: fix NULL pointer dereference check
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"MTD:
- Apart from preventing the mtdblk to run on top of ftl or ubiblk
(which may cause security issues and has no meaning anyway), there
are a few misc fixes.
Raw NAND:
- Two meaningful changes this time. The conversion of the brcmnand
driver to the ->exec_op() API, this series brought additional
changes to the core in order to help controller drivers to handle
themselves the WP pin during destructive operations when relevant.
- There is also a series bringing important fixes to the sequential
read feature.
- As always, there is as well a whole bunch of miscellaneous W=1
fixes, together with a few runtime fixes (double free, timeout
value, OOB layout, missing register initialization) and the usual
load of remove callbacks turned into void (which led to switch the
txx9ndfmc driver to use module_platform_driver()).
SPI NOR:
- SPI NOR comes with die erase support for multi die flashes, with
new octal protocols (1-1-8 and 1-8-8) parsed from SFDP and with an
updated documentation about what the contributors shall consider
when proposing flash additions or updates.
- Michael Walle stepped out from the reviewer role to maintainer"
* tag 'mtd/for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (39 commits)
mtd: rawnand: Clarify conditions to enable continuous reads
mtd: rawnand: Prevent sequential reads with on-die ECC engines
mtd: rawnand: Fix core interference with sequential reads
mtd: rawnand: Prevent crossing LUN boundaries during sequential reads
mtd: Fix gluebi NULL pointer dereference caused by ftl notifier
dt-bindings: mtd: partitions: u-boot: Fix typo
mtd: rawnand: s3c2410: fix Excess struct member description kernel-doc warnings
MAINTAINERS: change my mail to the kernel.org one
mtd: spi-nor: sfdp: get the 1-1-8 and 1-8-8 protocol from SFDP
mtd: spi-nor: drop superfluous debug prints
mtd: spi-nor: sysfs: hide the flash name if not set
mtd: spi-nor: mark the flash name as obsolete
mtd: spi-nor: print flash ID instead of name
mtd: maps: vmu-flash: Fix the (mtd core) switch to ref counters
mtd: ssfdc: Remove an unused variable
mtd: rawnand: diskonchip: fix a potential double free in doc_probe
mtd: rawnand: rockchip: Add missing title to a kernel doc comment
mtd: rawnand: rockchip: Rename a structure
mtd: rawnand: pl353: Fix kernel doc
mtd: spi-nor: micron-st: Add support for mt25qu01g
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A moderately busy release for SPI, the main core update was the
merging of support for multiple chip selects, used in some flash
configurations. There were also big overhauls for the AXI SPI Engine
and PL022 drivers, plus some new device support for ST.
There's a few patches for other trees, API updates to allow the
multiple chip select support and one of the naming modernisations
touched a controller embedded in the USB code.
- Support for multiple chip selects.
- A big overhaul for the AXI SPI engine driver, modernising it and
adding a bunch of new features.
- Modernisation of the PL022 driver, fixing some issues with
submitting messages while in atomic context in the process.
- Many drivers were converted to use new APIs which avoid outdated
terminology for devices and controllers.
- Support for ST Microelectronics STM32F7 and STM32MP25, and Renesas
RZ/Five"
* tag 'spi-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (83 commits)
spi: stm32: add st,stm32mp25-spi compatible supporting STM32MP25 soc
dt-bindings: spi: stm32: add st,stm32mp25-spi compatible
spi: stm32: use dma_get_slave_caps prior to configuring dma channel
spi: axi-spi-engine: fix struct member doc warnings
spi: pl022: update description of internal_cs_control()
spi: pl022: delete description of cur_msg
spi: dw: Remove Intel Thunder Bay SOC support
spi: dw: Remove Intel Thunder Bay SOC support
spi: sh-msiof: Enforce fixed DTDL for R-Car H3
spi: ljca: switch to use devm_spi_alloc_host()
spi: cs42l43: switch to use devm_spi_alloc_host()
spi: zynqmp-gqspi: switch to use modern name
spi: zynq-qspi: switch to use modern name
spi: xtensa-xtfpga: switch to use modern name
spi: xlp: switch to use modern name
spi: xilinx: switch to use modern name
spi: xcomm: switch to use modern name
spi: uniphier: switch to use modern name
spi: topcliff-pch: switch to use modern name
spi: wpcm-fiu: switch to use devm_spi_alloc_host()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The main updates for this release are around monitoring of regulators,
largely for error handling purposes. We allow the stream of regulator
events to be seen by userspace as netlink events and allow system
integrators to describe individual regulators as system critical with
information on how long the system is expected to last on error. The
system level error handling is very much about best effort problem
mitigation rather than providing something fully robust, the initial
drive was to provide a mechanism for trying to avoid initiating any
new writes to flash once we notice the power going out.
Otherwise it's very quiet, mainly several new Qualcomm devices.
- Support for marking regulators as system critical and providing
information on how long the system might last with those regulators
in a failure state, hooked into the existing critical shutdown
error handling.
- Optional support for generating netlink events for events, there
are use cases for system monitoring UIs and error handling.
- A command line option to leave unused controllable regulators
enabled, useful for debugging. We already only disable regulators
we were explicitly given permission to control.
- Support for Quacomm MP5496, PM8010 and PM8937"
* tag 'regulator-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (31 commits)
regulator: event: Ensure atomicity for sequence number
uapi: regulator: Fix typo
regulator: Reuse LINEAR_RANGE() in REGULATOR_LINEAR_RANGE()
dt-bindings: regulator: qcom,usb-vbus-regulator: clean up example
regulator: qcom_smd: Add LDO5 MP5496 regulator
regulator: qcom-rpmh: add support for pm8010 regulators
regulator: dt-bindings: qcom,rpmh: add compatible for pm8010
regulator: qcom-rpmh: extend to support multiple linear voltage ranges
regulator: wm8350: Convert to platform remove callback returning void
regulator: virtual: Convert to platform remove callback returning void
regulator: userspace-consumer: Convert to platform remove callback returning void
regulator: uniphier: Convert to platform remove callback returning void
regulator: stm32-vrefbuf: Convert to platform remove callback returning void
regulator: db8500-prcmu: Convert to platform remove callback returning void
regulator: bd9571mwv: Convert to platform remove callback returning void
regulator: arizona-ldo1: Convert to platform remove callback returning void
regulator: event: Add regulator netlink event support
regulator: event: Add regulator netlink event support
regulator: stpmic1: Fix kernel-doc notation warnings
regulator: palmas: remove redundant initialization of pointer pdata
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This was a very quiet release for regmap, we added kunit test coverage
for a noinc fix that was merged during v6.7 and a couple of other
trivial cleanups"
* tag 'regmap-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: fix kcalloc() arguments order
regmap: fix regmap_noinc_write() description
regmap: kunit: add noinc write test
regmap: ram: support noinc semantics
|
|
* clk-rs9:
clk: rs9: Add support for 9FGV0841
clk: rs9: Replace model check with bitshift from chip data
clk: rs9: Limit check to vendor ID in VID register
dt-bindings: clk: rs9: Add 9FGV0841
|
|
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
* clk-zynq:
drivers: clk: zynqmp: update divider round rate logic
drivers: clk: zynqmp: calculate closest mux rate
* clk-xilinx:
clocking-wizard: Add support for versal clocking wizard
dt-bindings: clock: xilinx: add versal compatible
* clk-stm:
dt-bindings: stm32: add clocks and reset binding for stm32mp25 platform
clk: stm32mp1: use stm32mp13 reset driver
clk: stm32mp1: move stm32mp1 clock driver into stm32 directory
|
|
clk-next
* clk-imx:
clk: imx: pll14xx: change naming of fvco to fout
clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks
clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu()
dt-bindings: clock: support i.MX93 ANATOP clock module
* clk-qcom: (41 commits)
clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: dispcc-sm8550: Use the correct PLL configuration function
clk: qcom: dispcc-sm8550: Update disp PLL settings
clk: qcom: gpucc-sm8550: Update GPU PLL settings
clk: qcom: gcc-sm8550: Mark RCGs shared where applicable
clk: qcom: gcc-sm8550: use collapse-voting for PCIe GDSCs
clk: qcom: gcc-sm8550: Mark the PCIe GDSCs votable
clk: qcom: gcc-sm8550: Add the missing RETAIN_FF_ENABLE GDSC flag
clk: qcom: camcc-sc8280xp: Prevent error pointer dereference
clk: qcom: videocc-sm8150: Add runtime PM support
clk: qcom: videocc-sm8150: Add missing PLL config property
clk: qcom: videocc-sm8150: Update the videocc resets
dt-bindings: clock: Update the videocc resets for sm8150
clk: qcom: rpmh: Add support for X1E80100 rpmh clocks
clk: qcom: Add Global Clock controller (GCC) driver for X1E80100
dt-bindings: clock: qcom-rpmhcc: Add RPMHCC bindings for X1E80100
dt-bindings: clock: qcom: Add X1E80100 GCC clocks
clk: qcom: Add ECPRICC driver support for QDU1000 and QRU1000
clk: qcom: branch: Add mem ops support for branch2 clocks
...
* clk-amlogic:
clk: meson: g12a: add CSI & ISP gates clocks
clk: meson: g12a: add MIPI ISP clocks
dt-bindings: clock: g12a-clkc: add MIPI ISP & CSI PHY clock ids
clk: meson: g12a: add CTS_ENCL & CTS_ENCL_SEL clocks
dt-bindings: clk: g12a-clkc: add CTS_ENCL clock ids
* clk-mediatek:
clk: mediatek: add drivers for MT7988 SoC
clk: mediatek: add pcw_chg_bit control for PLLs of MT7988
dt-bindings: clock: mediatek: add clock controllers of MT7988
dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs
dt-bindings: clock: mediatek: add MT7988 clock IDs
clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: clk-mux: Support custom parent indices for muxes
dt-bindings: clock: brcm,kona-ccu: convert to YAML
dt-bindings: arm: mediatek: move ethsys controller & convert to DT schema
dt-bindings: Remove alt_ref from versal
|
|
'clk-sophgo' into clk-next
- Add glitch free PLL setting support to si5351 clk driver
* clk-versa:
clk: versaclock3: Drop ret variable
clk: versaclock3: Add missing space between ')' and '{'
clk: versaclock3: Use u8 return type for get_parent() callback
clk: versaclock3: Avoid unnecessary padding
clk: versaclock3: Update vc3_get_div() to avoid divide by zero
* clk-silabs:
clk: si5351: allow PLLs to be adjusted without reset
dt-bindings: clock: si5351: add PLL reset mode property
dt-bindings: clock: si5351: convert to yaml
* clk-samsung:
clk: samsung: Improve kernel-doc comments
clk: samsung: Fix kernel-doc comments
* clk-starfive:
clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx
clk: starfive: Add flags argument to JH71X0__MUX macro
* clk-sophgo:
dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC
|
|
'clk-cleanup' into clk-next
* clk-renesas:
clk: renesas: r9a08g045: Add clock and reset support for ETH0 and ETH1
clk: renesas: rzg2l: Check reset monitor registers
clk: renesas: r9a08g045: Add IA55 pclk and its reset
clk: renesas: rzg2l-cpg: Reuse code in rzg2l_cpg_reset()
clk: renesas: r8a779g0: Add PCIe clocks
clk: renesas: r8a779g0: Add EtherTSN clock
* clk-rockchip:
clk: rockchip: rk3568: Mark pclk_usb as critical
clk: rockchip: rk3568: Add PLL rate for 126.4MHz
clk: rockchip: rk3568: Add PLL rate for 115.2MHz
* clk-allwinner:
clk: sunxi-ng: nkm: remove redundant initialization of tmp_parent
* clk-cleanup:
clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw
clk: si5341: fix an error code problem in si5341_output_clk_set_rate
clk: microchip: mpfs-ccc: replace include of asm-generic/errno-base.h
clk: rs9: Fix DIF OEn bit placement on 9FGV0241
clk: mmp: pxa168: Fix memory leak in pxa168_clk_init()
clk: hi3620: Fix memory leak in hi3620_mmc_clk_init()
clk: sp7021: fix return value check in sp7021_clk_probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Quite a lot of kexec work this time around. Many singleton patches in
many places. The notable patch series are:
- nilfs2 folio conversion from Matthew Wilcox in 'nilfs2: Folio
conversions for file paths'.
- Additional nilfs2 folio conversion from Ryusuke Konishi in 'nilfs2:
Folio conversions for directory paths'.
- IA64 remnant removal in Heiko Carstens's 'Remove unused code after
IA-64 removal'.
- Arnd Bergmann has enabled the -Wmissing-prototypes warning
everywhere in 'Treewide: enable -Wmissing-prototypes'. This had
some followup fixes:
- Nathan Chancellor has cleaned up the hexagon build in the series
'hexagon: Fix up instances of -Wmissing-prototypes'.
- Nathan also addressed some s390 warnings in 's390: A couple of
fixes for -Wmissing-prototypes'.
- Arnd Bergmann addresses the same warnings for MIPS in his series
'mips: address -Wmissing-prototypes warnings'.
- Baoquan He has made kexec_file operate in a top-down-fitting manner
similar to kexec_load in the series 'kexec_file: Load kernel at top
of system RAM if required'
- Baoquan He has also added the self-explanatory 'kexec_file: print
out debugging message if required'.
- Some checkstack maintenance work from Tiezhu Yang in the series
'Modify some code about checkstack'.
- Douglas Anderson has disentangled the watchdog code's logging when
multiple reports are occurring simultaneously. The series is
'watchdog: Better handling of concurrent lockups'.
- Yuntao Wang has contributed some maintenance work on the crash code
in 'crash: Some cleanups and fixes'"
* tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (157 commits)
crash_core: fix and simplify the logic of crash_exclude_mem_range()
x86/crash: use SZ_1M macro instead of hardcoded value
x86/crash: remove the unused image parameter from prepare_elf_headers()
kdump: remove redundant DEFAULT_CRASH_KERNEL_LOW_SIZE
scripts/decode_stacktrace.sh: strip unexpected CR from lines
watchdog: if panicking and we dumped everything, don't re-enable dumping
watchdog/hardlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/softlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/hardlockup: adopt softlockup logic avoiding double-dumps
kexec_core: fix the assignment to kimage->control_page
x86/kexec: fix incorrect end address passed to kernel_ident_mapping_init()
lib/trace_readwrite.c:: replace asm-generic/io with linux/io
nilfs2: cpfile: fix some kernel-doc warnings
stacktrace: fix kernel-doc typo
scripts/checkstack.pl: fix no space expression between sp and offset
x86/kexec: fix incorrect argument passed to kexec_dprintk()
x86/kexec: use pr_err() instead of kexec_dprintk() when an error occurs
nilfs2: add missing set_freezable() for freezable kthread
kernel: relay: remove relay_file_splice_read dead code, doesn't work
docs: submit-checklist: remove all of "make namespacecheck"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
|
|
In of_parse_phandle_with_args_map() the inner loop that
iterates through the map entries calls of_node_put(new)
to free the reference acquired by the previous iteration
of the inner loop. This assumes that the value of "new" is
NULL on the first iteration of the inner loop.
Make sure that this is true in all iterations of the outer
loop by setting "new" to NULL after its value is assigned to "cur".
Extend the unittest to detect the double free and add an additional
test case that actually triggers this path.
Fixes: bd6f2fd5a1 ("of: Support parsing phandle argument lists through a nexus node")
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: "Christian A. Ehrhardt" <lk@c--e.de>
Link: https://lore.kernel.org/r/20231229105411.1603434-1-lk@c--e.de
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
RPi 4 uses V3D 4.2, which is currently not supported by the register
definition stated at `v3d_core_reg_defs`. We should be able to support
V3D 4.2, therefore, change the maximum version of the register
definition to 42, not 41.
Fixes: 0ad5bc1ce463 ("drm/v3d: fix up register addresses for V3D 7.x")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240109113126.929446-1-mcanal@igalia.com
|
|
property.c:1220 : Fixed excess struct member definition warning
property.c:444 : Fixed missing a blank line after declarations
Signed-off-by: Muzammil Ashraf <m.muzzammilashraf@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20231219062317.17650-1-muzammil@dreambigsemi.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Merge in late fixes to prepare for the 6.8 net-next PR
No conflicts.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Like the ASUS ExpertBook B1502CBA and various ASUS laptops, the
ASUS ExpertBook B1502CGA has an ACPI DSDT table that describes IRQ 1 as
ActiveLow while the kernel overrides it to Edge_High.
$ sudo dmesg | grep DMI
[ 0.000000] DMI: ASUSTeK COMPUTER INC. ASUS EXPERTBOOK B1502CGA_B1502CGA/B1502CGA, BIOS B1502CGA.303 06/05/2023
$ grep -A 40 PS2K dsdt.dsl | grep IRQ -A 1
IRQ (Level, ActiveLow, Exclusive, )
{1}
This prevents the keyboard from working. To fix this issue, add this laptop
to the skip_override_table so that the kernel does not override IRQ 1.
Signed-off-by: Michael Maltsev <mekosko@projectyo.network>
[ rjw: rebase, replace .ident field with a comment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Asus Vivobook E1504GA and E1504GAB notebooks are affected by bug #216158
(DSDT specifies the kbd IRQ as level active-low and using the override
changes this to rising edge, stopping the keyboard from working).
Users of these notebooks do not have a working keyboard unless they add
their DMI information to the struct irq1_level_low_skip_override array
and compile a custom kernel.
Add support for these computers to the Linux kernel without requiring
the end-user to recompile the kernel.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216158
Signed-off-by: Ben Mayo <benny1091@gmail.com>
[ rjw: Link tag, subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
