summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-12-12Merge tag 'linux-kselftest-next-6.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest updates from Shuah Khan: "Several fixes and enhancements to existing tests and a few new tests: - add new amd-pstate tests and fix and enhance existing ones - add new watchdog tests and enhance existing ones to improve coverage - fixes to ftrace, splice_read, rtc, and efivars tests - fixes to handle egrep obsolescence in the latest grep release - miscellaneous spelling and SPDX fixes" * tag 'linux-kselftest-next-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (24 commits) selftests/ftrace: Use long for synthetic event probe test selftests/tpm2: Split async tests call to separate shell script runner selftests: splice_read: Fix sysfs read cases selftests: ftrace: Use "grep -E" instead of "egrep" selftests: gpio: Use "grep -E" instead of "egrep" selftests: kselftest_deps: Use "grep -E" instead of "egrep" selftests/efivarfs: Add checking of the test return value cpufreq: amd-pstate: fix spdxcheck warnings for amd-pstate-ut.c selftests: rtc: skip when RTC is not present selftests/ftrace: event_triggers: wait longer for test_event_enable selftests/vDSO: Add riscv getcpu & gettimeofday test Documentation: amd-pstate: Add tbench and gitsource test introduction selftests: amd-pstate: Trigger gitsource benchmark and test cpus selftests: amd-pstate: Trigger tbench benchmark and test cpus selftests: amd-pstate: Split basic.sh into run.sh and basic.sh. selftests: amd-pstate: Rename amd-pstate-ut.sh to basic.sh. selftests/ftrace: Convert tracer tests to use 'requires' to specify program dependency selftests/ftrace: Add check for ping command for trigger tests selftests/watchdog: Fix spelling mistake "Temeprature" -> "Temperature" selftests/watchdog: add test for WDIOC_GETTEMP ...
2022-12-12Merge tag 'random-6.2-rc1-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull random number generator updates from Jason Donenfeld: - Replace prandom_u32_max() and various open-coded variants of it, there is now a new family of functions that uses fast rejection sampling to choose properly uniformly random numbers within an interval: get_random_u32_below(ceil) - [0, ceil) get_random_u32_above(floor) - (floor, U32_MAX] get_random_u32_inclusive(floor, ceil) - [floor, ceil] Coccinelle was used to convert all current users of prandom_u32_max(), as well as many open-coded patterns, resulting in improvements throughout the tree. I'll have a "late" 6.1-rc1 pull for you that removes the now unused prandom_u32_max() function, just in case any other trees add a new use case of it that needs to converted. According to linux-next, there may be two trivial cases of prandom_u32_max() reintroductions that are fixable with a 's/.../.../'. So I'll have for you a final conversion patch doing that alongside the removal patch during the second week. This is a treewide change that touches many files throughout. - More consistent use of get_random_canary(). - Updates to comments, documentation, tests, headers, and simplification in configuration. - The arch_get_random*_early() abstraction was only used by arm64 and wasn't entirely useful, so this has been replaced by code that works in all relevant contexts. - The kernel will use and manage random seeds in non-volatile EFI variables, refreshing a variable with a fresh seed when the RNG is initialized. The RNG GUID namespace is then hidden from efivarfs to prevent accidental leakage. These changes are split into random.c infrastructure code used in the EFI subsystem, in this pull request, and related support inside of EFISTUB, in Ard's EFI tree. These are co-dependent for full functionality, but the order of merging doesn't matter. - Part of the infrastructure added for the EFI support is also used for an improvement to the way vsprintf initializes its siphash key, replacing an sleep loop wart. - The hardware RNG framework now always calls its correct random.c input function, add_hwgenerator_randomness(), rather than sometimes going through helpers better suited for other cases. - The add_latent_entropy() function has long been called from the fork handler, but is a no-op when the latent entropy gcc plugin isn't used, which is fine for the purposes of latent entropy. But it was missing out on the cycle counter that was also being mixed in beside the latent entropy variable. So now, if the latent entropy gcc plugin isn't enabled, add_latent_entropy() will expand to a call to add_device_randomness(NULL, 0), which adds a cycle counter, without the absent latent entropy variable. - The RNG is now reseeded from a delayed worker, rather than on demand when used. Always running from a worker allows it to make use of the CPU RNG on platforms like S390x, whose instructions are too slow to do so from interrupts. It also has the effect of adding in new inputs more frequently with more regularity, amounting to a long term transcript of random values. Plus, it helps a bit with the upcoming vDSO implementation (which isn't yet ready for 6.2). - The jitter entropy algorithm now tries to execute on many different CPUs, round-robining, in hopes of hitting even more memory latencies and other unpredictable effects. It also will mix in a cycle counter when the entropy timer fires, in addition to being mixed in from the main loop, to account more explicitly for fluctuations in that timer firing. And the state it touches is now kept within the same cache line, so that it's assured that the different execution contexts will cause latencies. * tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits) random: include <linux/once.h> in the right header random: align entropy_timer_state to cache line random: mix in cycle counter when jitter timer fires random: spread out jitter callback to different CPUs random: remove extraneous period and add a missing one in comments efi: random: refresh non-volatile random seed when RNG is initialized vsprintf: initialize siphash key using notifier random: add back async readiness notifier random: reseed in delayed work rather than on-demand random: always mix cycle counter in add_latent_entropy() hw_random: use add_hwgenerator_randomness() for early entropy random: modernize documentation comment on get_random_bytes() random: adjust comment to account for removed function random: remove early archrandom abstraction random: use random.trust_{bootloader,cpu} command line option only stackprotector: actually use get_random_canary() stackprotector: move get_random_canary() into stackprotector.h treewide: use get_random_u32_inclusive() when possible treewide: use get_random_u32_{above,below}() instead of manual loop treewide: use get_random_u32_below() instead of deprecated function ...
2022-12-12net: ipa: add IPA v4.7 supportAlex Elder
Add the necessary register and data definitions needed for IPA v4.7, which is found on the SM6350 SoC. Co-developed-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-12bnxt: Use generic HBH removal helper in tx pathCoco Li
Eric Dumazet implemented Big TCP that allowed bigger TSO/GRO packet sizes for IPv6 traffic. See patch series: 'commit 89527be8d8d6 ("net: add IFLA_TSO_{MAX_SIZE|SEGS} attributes")' This reduces the number of packets traversing the networking stack and should usually improves performance. However, it also inserts a temporary Hop-by-hop IPv6 extension header. Using the HBH header removal method in the previous patch, the extra header be removed in bnxt drivers to allow it to send big TCP packets (bigger TSO packets) as well. Tested: Compiled locally To further test functional correctness, update the GSO/GRO limit on the physical NIC: ip link set eth0 gso_max_size 181000 ip link set eth0 gro_max_size 181000 Note that if there are bonding or ipvan devices on top of the physical NIC, their GSO sizes need to be updated as well. Then, IPv6/TCP packets with sizes larger than 64k can be observed. Signed-off-by: Coco Li <lixiaoyan@google.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Tested-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20221210041646.3587757-2-lixiaoyan@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-12qlcnic: Clean up some inconsistent indentingJiapeng Chong
No functional modification involved. drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c:714 qlcnic_validate_ring_count() warn: inconsistent indenting. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3419 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20221212055813.91154-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-12i40e: allow toggling loopback mode via ndo_set_features callbackTirthendu Sarkar
Add support for NETIF_F_LOOPBACK. This feature can be set via: $ ethtool -K eth0 loopback <on|off> This sets the MAC Tx->Rx loopback. This feature is used for the xsk selftests, and might have other uses too. Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20221209185553.2520088-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-12i40e: Fix the inability to attach XDP program on downed interfaceBartosz Staszewski
Whenever trying to load XDP prog on downed interface, function i40e_xdp was passing vsi->rx_buf_len field to i40e_xdp_setup() which was equal 0. i40e_open() calls i40e_vsi_configure_rx() which configures that field, but that only happens when interface is up. When it is down, i40e_open() is not being called, thus vsi->rx_buf_len is not set. Solution for this is calculate buffer length in newly created function - i40e_calculate_vsi_rx_buf_len() that return actual buffer length. Buffer length is being calculated based on the same rules applied previously in i40e_vsi_configure_rx() function. Fixes: 613142b0bb88 ("i40e: Log error for oversized MTU on device") Fixes: 0c8493d90b6b ("i40e: add XDP support for pass and drop actions") Signed-off-by: Bartosz Staszewski <bartoszx.staszewski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Shwetha Nagaraju <Shwetha.nagaraju@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Saeed Mahameed <saeed@kernel.com> Link: https://lore.kernel.org/r/20221209185411.2519898-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-12Merge tag 'perf-core-2022-12-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf events updates from Ingo Molnar: - Thoroughly rewrite the data structures that implement perf task context handling, with the goal of fixing various quirks and unfeatures both in already merged, and in upcoming proposed code. The old data structure is the per task and per cpu perf_event_contexts: task_struct::perf_events_ctxp[] <-> perf_event_context <-> perf_cpu_context ^ | ^ | ^ `---------------------------------' | `--> pmu ---' v ^ perf_event ------' In this new design this is replaced with a single task context and a single CPU context, plus intermediate data-structures: task_struct::perf_event_ctxp -> perf_event_context <- perf_cpu_context ^ | ^ ^ `---------------------------' | | | | perf_cpu_pmu_context <--. | `----. ^ | | | | | | v v | | ,--> perf_event_pmu_context | | | | | | | v v | perf_event ---> pmu ----------------' [ See commit bd2756811766 for more details. ] This rewrite was developed by Peter Zijlstra and Ravi Bangoria. - Optimize perf_tp_event() - Update the Intel uncore PMU driver, extending it with UPI topology discovery on various hardware models. - Misc fixes & cleanups * tag 'perf-core-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) perf/x86/intel/uncore: Fix reference count leak in __uncore_imc_init_box() perf/x86/intel/uncore: Fix reference count leak in snr_uncore_mmio_map() perf/x86/intel/uncore: Fix reference count leak in hswep_has_limit_sbox() perf/x86/intel/uncore: Fix reference count leak in sad_cfg_iio_topology() perf/x86/intel/uncore: Make set_mapping() procedure void perf/x86/intel/uncore: Update sysfs-devices-mapping file perf/x86/intel/uncore: Enable UPI topology discovery for Sapphire Rapids perf/x86/intel/uncore: Enable UPI topology discovery for Icelake Server perf/x86/intel/uncore: Get UPI NodeID and GroupID perf/x86/intel/uncore: Enable UPI topology discovery for Skylake Server perf/x86/intel/uncore: Generalize get_topology() for SKX PMUs perf/x86/intel/uncore: Disable I/O stacks to PMU mapping on ICX-D perf/x86/intel/uncore: Clear attr_update properly perf/x86/intel/uncore: Introduce UPI topology type perf/x86/intel/uncore: Generalize IIO topology support perf/core: Don't allow grouping events from different hw pmus perf/amd/ibs: Make IBS a core pmu perf: Fix function pointer case perf/x86/amd: Remove the repeated declaration perf: Fix possible memleak in pmu_dev_alloc() ...
2022-12-12net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconfXin Long
This patch is to use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf for Team port. This flag will be set in team_port_enter(), which is called before dev_open(), and cleared in team_port_leave(), called after dev_close() and the err path in team_port_add(). Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-12net: add IFF_NO_ADDRCONF and use it in bonding to prevent ipv6 addrconfXin Long
Currently, in bonding it reused the IFF_SLAVE flag and checked it in ipv6 addrconf to prevent ipv6 addrconf. However, it is not a proper flag to use for no ipv6 addrconf, for bonding it has to move IFF_SLAVE flag setting ahead of dev_open() in bond_enslave(). Also, IFF_MASTER/SLAVE are historical flags used in bonding and eql, as Jiri mentioned, the new devices like Team, Failover do not use this flag. So as Jiri suggested, this patch adds IFF_NO_ADDRCONF in priv_flags of the device to indicate no ipv6 addconf, and uses it in bonding and moves IFF_SLAVE flag setting back to its original place. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-12stmmac: fix potential division by 0Piergiorgio Beruto
When the MAC is connected to a 10 Mb/s PHY and the PTP clock is derived from the MAC reference clock (default), the clk_ptp_rate becomes too small and the calculated sub second increment becomes 0 when computed by the stmmac_config_sub_second_increment() function within stmmac_init_tstamp_counter(). Therefore, the subsequent div_u64 in stmmac_init_tstamp_counter() operation triggers a divide by 0 exception as shown below. [ 95.062067] socfpga-dwmac ff700000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 95.076440] socfpga-dwmac ff700000.ethernet eth0: PHY [stmmac-0:08] driver [NCN26000] (irq=49) [ 95.095964] dwmac1000: Master AXI performs any burst length [ 95.101588] socfpga-dwmac ff700000.ethernet eth0: No Safety Features support found [ 95.109428] Division by zero in kernel. [ 95.113447] CPU: 0 PID: 239 Comm: ifconfig Not tainted 6.1.0-rc7-centurion3-1.0.3.0-01574-gb624218205b7-dirty #77 [ 95.123686] Hardware name: Altera SOCFPGA [ 95.127695] unwind_backtrace from show_stack+0x10/0x14 [ 95.132938] show_stack from dump_stack_lvl+0x40/0x4c [ 95.137992] dump_stack_lvl from Ldiv0+0x8/0x10 [ 95.142527] Ldiv0 from __aeabi_uidivmod+0x8/0x18 [ 95.147232] __aeabi_uidivmod from div_u64_rem+0x1c/0x40 [ 95.152552] div_u64_rem from stmmac_init_tstamp_counter+0xd0/0x164 [ 95.158826] stmmac_init_tstamp_counter from stmmac_hw_setup+0x430/0xf00 [ 95.165533] stmmac_hw_setup from __stmmac_open+0x214/0x2d4 [ 95.171117] __stmmac_open from stmmac_open+0x30/0x44 [ 95.176182] stmmac_open from __dev_open+0x11c/0x134 [ 95.181172] __dev_open from __dev_change_flags+0x168/0x17c [ 95.186750] __dev_change_flags from dev_change_flags+0x14/0x50 [ 95.192662] dev_change_flags from devinet_ioctl+0x2b4/0x604 [ 95.198321] devinet_ioctl from inet_ioctl+0x1ec/0x214 [ 95.203462] inet_ioctl from sock_ioctl+0x14c/0x3c4 [ 95.208354] sock_ioctl from vfs_ioctl+0x20/0x38 [ 95.212984] vfs_ioctl from sys_ioctl+0x250/0x844 [ 95.217691] sys_ioctl from ret_fast_syscall+0x0/0x4c [ 95.222743] Exception stack(0xd0ee1fa8 to 0xd0ee1ff0) [ 95.227790] 1fa0: 00574c4f be9aeca4 00000003 00008914 be9aeca4 be9aec50 [ 95.235945] 1fc0: 00574c4f be9aeca4 0059f078 00000036 be9aee8c be9aef7a 00000015 00000000 [ 95.244096] 1fe0: 005a01f0 be9aec38 004d7484 b6e67d74 Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com> Fixes: 91a2559c1dc5 ("net: stmmac: Fix sub-second increment") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/de4c64ccac9084952c56a06a8171d738604c4770.1670678513.git.piergiorgio.beruto@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-12octeontx2-af: cn10k: mcs: Fix a resource leak in the probe and remove functionsChristophe JAILLET
In mcs_register_interrupts(), a call to request_irq() is not balanced by a corresponding free_irq(), neither in the error handling path, nor in the remove function. Add the missing calls. Fixes: 6c635f78c474 ("octeontx2-af: cn10k: mcs: Handle MCS block interrupts") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/69f153db5152a141069f990206e7389f961d41ec.1670693669.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-12net: dsa: mv88e6xxx: replace VTU violation prints with trace pointsVladimir Oltean
It is possible to trigger these VTU violation messages very easily, it's only necessary to send packets with an unknown VLAN ID to a port that belongs to a VLAN-aware bridge. Do a similar thing as for ATU violation messages, and hide them in the kernel's trace buffer. New usage model: $ trace-cmd list | grep mv88e6xxx mv88e6xxx mv88e6xxx:mv88e6xxx_vtu_miss_violation mv88e6xxx:mv88e6xxx_vtu_member_violation $ trace-cmd report Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Saeed Mahameed <saeed@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-12net: dsa: mv88e6xxx: replace ATU violation prints with trace pointsVladimir Oltean
In applications where the switch ports must perform 802.1X based authentication and are therefore locked, ATU violation interrupts are quite to be expected as part of normal operation. The problem is that they currently spam the kernel log, even if rate limited. Create a series of trace points, all derived from the same event class, which log these violations to the kernel's trace buffer, which is both much faster and much easier to ignore than printing to a serial console. New usage model: $ trace-cmd list | grep mv88e6xxx mv88e6xxx mv88e6xxx:mv88e6xxx_atu_full_violation mv88e6xxx:mv88e6xxx_atu_miss_violation mv88e6xxx:mv88e6xxx_atu_member_violation $ trace-cmd record -e mv88e6xxx sleep 10 Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Saeed Mahameed <saeed@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-12net: dsa: mv88e6xxx: read FID when handling ATU violationsHans J. Schultz
When an ATU violation occurs, the switch uses the ATU FID register to report the FID of the MAC address that incurred the violation. It would be good for the driver to know the FID value for purposes such as logging and CPU-based authentication. Up until now, the driver has been calling the mv88e6xxx_g1_atu_op() function to read ATU violations, but that doesn't do exactly what we want, namely it calls mv88e6xxx_g1_atu_fid_write() with FID 0. (side note, the documentation for the ATU Get/Clear Violation command says that writes to the ATU FID register have no effect before the operation starts, it's only that we disregard the value that this register provides once the operation completes) So mv88e6xxx_g1_atu_fid_write() is not what we want, but rather mv88e6xxx_g1_atu_fid_read(). However, the latter doesn't exist, we need to write it. The remainder of mv88e6xxx_g1_atu_op() except for mv88e6xxx_g1_atu_fid_write() is still needed, namely to send a GET_CLR_VIOLATION command to the ATU. In principle we could have still kept calling mv88e6xxx_g1_atu_op(), but the MDIO writes to the ATU FID register are pointless, but in the interest of doing less CPU work per interrupt, write a new function called mv88e6xxx_g1_read_atu_violation() and call it. The FID will be the port default FID as set by mv88e6xxx_port_set_fid() if the VID from the packet cannot be found in the VTU. Otherwise it is the FID derived from the VTU entry associated with that VID. Signed-off-by: Hans J. Schultz <netdev@kapio-technology.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-12net: dsa: mv88e6xxx: remove ATU age out violation printVladimir Oltean
Currently, the MV88E6XXX_PORT_ASSOC_VECTOR_INT_AGE_OUT bit (interrupt on age out) is not enabled by the driver, and as a result, the print for age out violations is dead code. Remove it until there is some way for this to be triggered. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-12Merge tag 'ras_core_for_v6.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 RAS updates from Borislav Petkov: - Fix confusing output from /sys/kernel/debug/ras/daemon_active - Add another MCE severity error case to the Intel error severity table to promote UC and AR errors to panic severity and remove the corresponding code condition doing that. - Make sure the thresholding and deferred error interrupts on AMD SMCA systems clear the all registers reporting an error so that there are no multiple errors logged for the same event * tag 'ras_core_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: RAS: Fix return value from show_trace() x86/mce: Use severity table to handle uncorrected errors in kernel x86/MCE/AMD: Clear DFR errors found in THR handler
2022-12-12Merge tag 'edac_updates_for_6.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC updates from Borislav Petkov: - Make ghes_edac a simple module like the rest of the EDAC drivers and drop the forced built-in only configuration by disentangling it from GHES (Jia He) - The usual small cleanups and improvements all over EDAC land * tag 'edac_updates_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper() EDAC/i5400: Fix typo in comment: vaious -> various EDAC/mc_sysfs: Increase legacy channel support to 12 MAINTAINERS: Make Mauro EDAC reviewer MAINTAINERS: Make Manivannan Sadhasivam the maintainer of qcom_edac EDAC/igen6: Return the correct error type when not the MC owner apei/ghes: Use xchg_release() for updating new cache slot instead of cmpxchg() EDAC: Check for GHES preference in the chipset-specific EDAC drivers EDAC/ghes: Make ghes_edac a proper module EDAC/ghes: Prepare to make ghes_edac a proper module EDAC/ghes: Add a notifier for reporting memory errors efi/cper: Export several helpers for ghes_edac to use EDAC/i5000: Mark as BROKEN
2022-12-12Merge tag 'x86_tdx_for_6.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 tdx updates from Dave Hansen: "This includes a single chunk of new functionality for TDX guests which allows them to talk to the trusted TDX module software and obtain an attestation report. This report can then be used to prove the trustworthiness of the guest to a third party and get access to things like storage encryption keys" * tag 'x86_tdx_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: selftests/tdx: Test TDX attestation GetReport support virt: Add TDX guest driver x86/tdx: Add a wrapper to get TDREPORT0 from the TDX Module
2022-12-12Bluetooth: hci_bcsp: don't call kfree_skb() under spin_lock_irqsave()Yang Yingliang
It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: hci_h5: don't call kfree_skb() under spin_lock_irqsave()Yang Yingliang
It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 43eb12d78960 ("Bluetooth: Fix/implement Three-wire reliable packet sending") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: hci_ll: don't call kfree_skb() under spin_lock_irqsave()Yang Yingliang
It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 166d2f6a4332 ("[Bluetooth] Add UART driver for Texas Instruments' BRF63xx chips") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: hci_qca: don't call kfree_skb() under spin_lock_irqsave()Yang Yingliang
It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 0ff252c1976d ("Bluetooth: hciuart: Add support QCA chipset for UART") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: btusb: don't call kfree_skb() under spin_lock_irqsave()Yang Yingliang
It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 803b58367ffb ("Bluetooth: btusb: Implement driver internal packet reassembly") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: btintel: Fix missing free skb in btintel_setup_combined()Wang ShaoBo
skb allocated by __hci_cmd_sync would not be used whether in checking for supported iBT hardware variants or after, we should free it in all error branches, this patch makes the case read version failed or default error case free skb before return. Fixes: c86c7285bb08 ("Bluetooth: btintel: Fix the legacy bootloader returns tlv based version") Fixes: 019a1caa7fd2 ("Bluetooth: btintel: Refactoring setup routine for bootloader devices") Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: btintel: Fix existing sparce warningsLuiz Augusto von Dentz
This fix the following warnings detect with make W=1 C=1: drivers/bluetooth/btintel.c:1041:38: warning: cast to restricted __le32 drivers/bluetooth/btintel.c:1786:25: warning: cast to restricted __le16 drivers/bluetooth/btintel.c:1795:25: warning: cast to restricted __le16 drivers/bluetooth/btintel.c:1796:25: warning: cast to restricted __le16 drivers/bluetooth/btintel.c:1797:25: warning: cast to restricted __le16 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: btusb: Fix existing sparce warningLuiz Augusto von Dentz
This fix the following warnings detect with make W=1 C=1: drivers/bluetooth/btusb.c:3426:28: warning: cast to restricted __le32 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: btusb: Fix new sparce warningsLuiz Augusto von Dentz
This fix the following warnings detect with make W=1 C=1: drivers/bluetooth/btusb.c:2212:9: warning: cast to restricted __le16 drivers/bluetooth/btusb.c:2212:9: warning: cast to restricted __le16 drivers/bluetooth/btusb.c:2245:18: warning: cast to restricted __le16 drivers/bluetooth/btusb.c:2249:18: warning: cast to restricted __le16 drivers/bluetooth/btusb.c:2253:18: warning: cast to restricted __le16 drivers/bluetooth/btusb.c:2257:18: warning: cast to restricted __le16 drivers/bluetooth/btusb.c:2261:18: warning: cast to restricted __le16 drivers/bluetooth/btusb.c:2267:18: warning: cast to restricted __le16 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: btusb: Add a new PID/VID 13d3/3549 for RTL8822CUGongwei Li
* /sys/kernel/debug/usb/devices T: Bus=03 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=b85b Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Gongwei Li <ligongwei@kylinos.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0cb8:0xc559Artem Lukyanov
Add the support ID(0x0cb8, 0xc559) to usb_device_id table for Realtek RTL8852BE. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cb8 ProdID=c559 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Artem Lukyanov <dukzcry@ya.ru> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: btusb: Add a new VID/PID 0489/e0f2 for MT7922Andy Chi
Add VID/PID 0489/e0f2 for MediaTek MT7922 Bluetooth chip. Found and tested with HP ProBook. From /sys/kernel/debug/usb/devices: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0f2 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Andy Chi <andy.chi@canonical.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: hci_bcm4377: Fix missing pci_disable_device() on error in ↵Yang Yingliang
bcm4377_probe() pci_disable_device() need be called while module exiting, switch to use pcim_enable(), pci_disable_device() will be called in pcim_release() after probe() failure. Fixes: ab80b2cec05f ("Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boards") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: btusb: Add Realtek 8761BUV support ID 0x2B89:0x8761Raman Varabets
Identifies as "Realtek Bluetooth Radio"; used in UGREEN CM390 (P/N 80889). Device description at /sys/kernel/debug/usb/devices: T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2b89 ProdID=8761 Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00E04C239987 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Raman Varabets <linux-bluetooth@cyborgize.sg> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boardsSven Peter
Broadcom BCM4377/4378/4387 are dual WiFi/Bluetooth boards found in Apple machines. This driver adds support for the Bluetooth function which exposes a shared memory IPC protocol over PCIe to tunnel HCI traffic. Signed-off-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: hci_bcm: Add CYW4373A0 supportMarek Vasut
CYW4373A0 is a Wi-Fi + Bluetooth combo device from Cypress. This chip is present e.g. on muRata 2AE module. This chip has additional quirk where the HCI command 0xfc45, used on older chips to switch UART clock from 24 MHz to 48 MHz, to support baudrates over 3 Mbdps, is no longer recognized by this newer chip. This newer chip can configure the 4 Mbdps baudrate without the need to issue HCI command 0xfc45, so add flag to indicate this and do not issue the command on this chip to avoid failure to set 4 Mbdps baud rate. It is not clear whether there is a way to determine which chip does and which chip does not support the HCI command 0xfc45, other than trial and error. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: btusb: Add more device IDs for WCN6855Shengyu Qu
Add IDs to usb_device_id table for WCN6855. IDs are extracted from Windows driver of Lenovo Thinkpad T14 Gen 2(Driver version 1.0.0.1205 Windows 10) Windows driver download address: https://pcsupport.lenovo.com/us/en/products/laptops-and-netbooks/ thinkpad-t-series-laptops/thinkpad-t14-gen-2-type-20xk-20xl/downloads /driver-list/ Signed-off-by: Shengyu Qu <wiagn233@outlook.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: btusb: Default CONFIG_BT_HCIBTUSB_POLL_SYNC=yLuiz Augusto von Dentz
poll_sync has been proven to fix races of USB data and event endpoints so this enables it by default. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com>
2022-12-12Bluetooth: btusb: Add CONFIG_BT_HCIBTUSB_POLL_SYNCLuiz Augusto von Dentz
This adds CONFIG_BT_HCIBTUSB_POLL_SYNC which can be used to set the default behavior of Bluetooth USB controller with respect to poll synchronization of its endpoits. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com>
2022-12-12virtio_bt: Fix alignment in configuration structIgor Skalkin
The current version of the configuration structure has unaligned 16-bit fields, but according to the specification [1], access to the configuration space must be aligned. Add a second, aligned version of the configuration structure and a new feature bit indicating that this version is being used. [1] https://docs.oasis-open.org/virtio/virtio/v1.1/virtio-v1.1.pdf Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: hci_qca: only assign wakeup with serial port supportZhengping Jiang
Only assign hdev->wakeup if the serial port supports wakeup. Otherwise it will fall back to the hci_uart_wakeup or the behavior that can be overridden before calling the hci_uart_register_device(). Signed-off-by: Zhengping Jiang <jiangzp@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: btusb: Ignore zero length of USB packets on ALT 6 for specific chipHilda Wu
For USB ALT 6 settings some Realtek chips need to transmit mSBC data continuously without the zero length of USB packets. In this commit, create BTUSB_ALT6_CONTINUOUS_TX to manage the behavior. Therefore, create REALTEK_ALT6_CONTINUOUS_TX_CHIP to manage the specific chip model for the behavior. Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: btrtl: Add btrealtek data structHilda Wu
This patch adds a data structure for btrealtek object, and the definition of vendor behavior flags. It also adds macros to set/test/get the flags. Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: virtio_bt: fix device removalMichael S. Tsirkin
Device removal is clearly out of virtio spec: it attempts to remove unused buffers from a VQ before invoking device reset. To fix, make open/close NOPs and do all cleanup/setup in probe/remove. NB: This is a hacky way to handle this - virtbt_{open,close} as NOP is not really what a driver is supposed to be doing. These are transport enable/disable callbacks from the BT core towards the driver. It maps to a device being enabled/disabled by something like bluetoothd for example. So if disabled, users expect that no resources/queues are in use. It does work with all other transports like USB, SDIO, UART etc. There should be no buffer used if the device is powered off. We also don’t have any USB URBs in-flight if the transport is not active. The way to implement a proper fix would be using vq reset if supported, or even using a full device reset. The cost of the hack is a single skb wasted on an unused bt device. NB2: with this fix in place driver still suffers from a race condition if an interrupt triggers while device is being reset. To fix, in the virtbt_close() callback we should deactivate all interrupts. To be fixed. squashed fixup: bluetooth: virtio_bt: fix an error code in probe() Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20220811080943.198245-1-mst@redhat.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
2022-12-12Bluetooth: Work around SCO over USB HCI design defectNicolas Cavallari
The USB interface between the host and the bluetooth adapter used for SCO packets uses an USB isochronous endpoint with a fragmentation scheme that does not tolerate errors. Except USB isochronous transfers do not provide a reliable stream with guaranteed delivery. (There is no retry on error, see USB spec v2.0 5.6 and 8.5.5.) To fragment a packet, the bluetooth HCI simply splits it in parts and transfer them as-is. The receiver is expected to reconstruct the packet by assuming the first fragment contains the header and parsing its size field. There is no error detection either. If a fragment is lost, the end result is that the kernel is no longer synchronized and will pass malformed data to the upper layers, since it has no way to tell if the first fragment is an actual first fragment or a continuation fragment. Resynchronization can only happen by luck and requires an unbounded amount of time. The typical symptom for a HSP/HFP bluetooth headset is that the microphone stops working and dmesg contains piles of rate-limited "Bluetooth: hci0: SCO packet for unknown connection handle XXXX" errors for an indeterminate amount of time, until the kernel accidentally resynchronize. A workaround is to ask the upper layer to prevalidate the first fragment header. This is not possible with user channels so this workaround is disabled in this case. This problem is the most severe when using an ath3k adapter on an i.MX 6 board, where packet loss occur regularly, possibly because it is an USB1 device connected on an USB2 hub and this is a special case requiring split transactions. Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: btusb: Introduce generic USB resetArchie Pusaka
On cmd_timeout with no reset_gpio, reset the USB port as a last resort. This patch changes the behavior of btusb_intel_cmd_timeout and btusb_rtl_cmd_timeout. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@google.com> Reviewed-by: Ying Hsu <yinghsu@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12btusb: Avoid reset of ISOC endpoint alt settings to zeroChethan Tumkur Narayan
In case of suspend/resume and HCI_RESET (BT On and Off), ISOC endpoint set to alt setting 0 when no SCO connection exists. This patch shall avoid resetting of ISOC endpoint to alt setting to 0. Signed-off-by: Chethan Tumkur Narayan <chethan.tumkur.narayan@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Merge tag 'cxl-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxlLinus Torvalds
Pull cxl updates from Dan Williams: "Compute Express Link (CXL) updates for 6.2. While it may seem backwards, the CXL update this time around includes some focus on CXL 1.x enabling where the work to date had been with CXL 2.0 (VH topologies) in mind. First generation CXL can mostly be supported via BIOS, similar to DDR, however it became clear there are use cases for OS native CXL error handling and some CXL 3.0 endpoint features can be deployed on CXL 1.x hosts (Restricted CXL Host (RCH) topologies). So, this update brings RCH topologies into the Linux CXL device model. In support of the ongoing CXL 2.0+ enabling two new core kernel facilities are added. One is the ability for the kernel to flag collisions between userspace access to PCI configuration registers and kernel accesses. This is brought on by the PCIe Data-Object-Exchange (DOE) facility, a hardware mailbox over config-cycles. The other is a cpu_cache_invalidate_memregion() API that maps to wbinvd_on_all_cpus() on x86. To prevent abuse it is disabled in guest VMs and architectures that do not support it yet. The CXL paths that need it, dynamic memory region creation and security commands (erase / unlock), are disabled when it is not present. As for the CXL 2.0+ this cycle the subsystem gains support Persistent Memory Security commands, error handling in response to PCIe AER notifications, and support for the "XOR" host bridge interleave algorithm. Summary: - Add the cpu_cache_invalidate_memregion() API for cache flushing in response to physical memory reconfiguration, or memory-side data invalidation from operations like secure erase or memory-device unlock. - Add a facility for the kernel to warn about collisions between kernel and userspace access to PCI configuration registers - Add support for Restricted CXL Host (RCH) topologies (formerly CXL 1.1) - Add handling and reporting of CXL errors reported via the PCIe AER mechanism - Add support for CXL Persistent Memory Security commands - Add support for the "XOR" algorithm for CXL host bridge interleave - Rework / simplify CXL to NVDIMM interactions - Miscellaneous cleanups and fixes" * tag 'cxl-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (71 commits) cxl/region: Fix memdev reuse check cxl/pci: Remove endian confusion cxl/pci: Add some type-safety to the AER trace points cxl/security: Drop security command ioctl uapi cxl/mbox: Add variable output size validation for internal commands cxl/mbox: Enable cxl_mbox_send_cmd() users to validate output size cxl/security: Fix Get Security State output payload endian handling cxl: update names for interleave ways conversion macros cxl: update names for interleave granularity conversion macros cxl/acpi: Warn about an invalid CHBCR in an existing CHBS entry tools/testing/cxl: Require cache invalidation bypass cxl/acpi: Fail decoder add if CXIMS for HBIG is missing cxl/region: Fix spelling mistake "memergion" -> "memregion" cxl/regs: Fix sparse warning cxl/acpi: Set ACPI's CXL _OSC to indicate RCD mode support tools/testing/cxl: Add an RCH topology cxl/port: Add RCD endpoint port enumeration cxl/mem: Move devm_cxl_add_endpoint() from cxl_core to cxl_mem tools/testing/cxl: Add XOR Math support to cxl_test cxl/acpi: Support CXL XOR Interleave Math (CXIMS) ...
2022-12-12Merge tag 'thermal-6.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "These include thermal core fixes to protect thermal device operations against thermal device removal, other thermal core fixes and updates of Intel thermal control drivers. Specifics: - Fix race conditions related to thermal device operations that are not protected against thermal device removal (Guenter Roeck) - Fix error code in __thermal_cooling_device_register() (Dan Carpenter) - Validate new cooling device state (coming from user space) in cur_state_store() and reuse the max_state value from cooling device structure in the sysfs interface (Viresh Kumar) - Fix some possible name leaks in error paths in the thermal control core code (Yang Yingliang) - Detect TCC lock bit set in the intel_tcc_cooling driver and make it refuse to update the TCC offset in that case (Zhang Rui) - Add TCC cooling support for RaptorLake-S (Zhang Rui) - Prevent accidental clearing of HFI status by one of the other drivers using the same status register (Srinivas Pandruvada) - Protect clearing of thermal status bits in Intel thermal control drivers (Srinivas Pandruvada) - Allow the HFI thermal control driver to ACK an HFI event for the previously observed timestamp (Srinivas Pandruvada) - Remove a pointless die_id check from the HFI thermal driver and adjust the definition a data structure used by it (Ricardo Neri)" * tag 'thermal-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: intel: hfi: Remove a pointless die_id check thermal: core: fix some possible name leaks in error paths thermal: intel: hfi: ACK HFI for the same timestamp thermal: intel: Protect clearing of thermal status bits thermal: intel: Prevent accidental clearing of HFI status thermal/core: Protect thermal device operations against thermal device removal thermal/core: Remove thermal_zone_set_trips() thermal/core: Protect sysfs accesses to thermal operations with thermal zone mutex thermal/core: Protect hwmon accesses to thermal operations with thermal zone mutex thermal/core: Introduce locked version of thermal_zone_device_update thermal/core: Move parameter validation from __thermal_zone_get_temp to thermal_zone_get_temp thermal/core: Ensure that thermal device is registered in thermal_zone_get_temp thermal/core: Delete device under thermal device zone lock thermal/core: Destroy thermal zone device mutex in release function thermal: intel: intel_tcc_cooling: Add TCC cooling support for RaptorLake-S thermal: intel: intel_tcc_cooling: Detect TCC lock bit thermal: intel: hfi: Improve the type of hfi_features::nr_table_pages thermal/core: fix error code in __thermal_cooling_device_register() thermal: sysfs: Reuse cdev->max_state thermal: Validate new state in cur_state_store()
2022-12-12Merge tag 'acpi-6.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and PNP updates from Rafael Wysocki: "These include new code (for instance, support for the FFH address space type and support for new firmware data structures in ACPICA), some new quirks (mostly related to backlight handling and I2C enumeration), a number of fixes and a fair amount of cleanups all over. Specifics: - Update the ACPICA code in the kernel to the 20221020 upstream version and fix a couple of issues in it: - Make acpi_ex_load_op() match upstream implementation (Rafael Wysocki) - Add support for loong_arch-specific APICs in MADT (Huacai Chen) - Add support for fixed PCIe wake event (Huacai Chen) - Add EBDA pointer sanity checks (Vit Kabele) - Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele) - Add CCEL table support to both compiler/disassembler (Kuppuswamy Sathyanarayanan) - Add a couple of new UUIDs to the known UUID list (Bob Moore) - Add support for FFH Opregion special context data (Sudeep Holla) - Improve warning message for "invalid ACPI name" (Bob Moore) - Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT table (Alison Schofield) - Prepare IORT support for revision E.e (Robin Murphy) - Finish support for the CDAT table (Bob Moore) - Fix error code path in acpi_ds_call_control_method() (Rafael Wysocki) - Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li Zetao) - Update the version of the ACPICA code in the kernel (Bob Moore) - Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device enumeration code (Giulio Benetti) - Change the return type of the ACPI driver remove callback to void and update its users accordingly (Dawei Li) - Add general support for FFH address space type and implement the low- level part of it for ARM64 (Sudeep Holla) - Fix stale comments in the ACPI tables parsing code and make it print more messages related to MADT (Hanjun Guo, Huacai Chen) - Replace invocations of generic library functions with more kernel- specific counterparts in the ACPI sysfs interface (Christophe JAILLET, Xu Panda) - Print full name paths of ACPI power resource objects during enumeration (Kane Chen) - Eliminate a compiler warning regarding a missing function prototype in the ACPI power management code (Sudeep Holla) - Fix and clean up the ACPI processor driver (Rafael Wysocki, Li Zhong, Colin Ian King, Sudeep Holla) - Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC driver (Mia Kanashi) - Add some mew ACPI backlight handling quirks and update some existing ones (Hans de Goede) - Make the ACPI backlight driver prefer the native backlight control over vendor backlight control when possible (Hans de Goede) - Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König) - Use xchg_release() instead of cmpxchg() for updating new GHES cache slots (Ard Biesheuvel) - Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay Lu) - Add new I2C device enumeration quirks for Medion Lifetab S10346 and Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede) - Make the ACPI battery driver notify user space about adding new battery hooks and removing the existing ones (Armin Wolf) - Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE() for freeing acpi_object structures to help diagnostics (Wang ShaoBo) - Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface code (ye xingchen) - Fix the _FIF package extraction failure handling in the ACPI fan driver (Hanjun Guo) - Fix the PCC mailbox handling error code path (Huisong Li) - Avoid using PCC Opregions if there is no platform interrupt allocated for this purpose (Huisong Li) - Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and CPPC library (ye xingchen) - Fix some kernel-doc issues in the ACPI GSI processing code (Xiongfeng Wang) - Fix name memory leak in pnp_alloc_dev() (Yang Yingliang) - Do not disable PNP devices on suspend when they cannot be re-enabled on resume (Hans de Goede) - Clean up the ACPI thermal driver a bit (Rafael Wysocki)" * tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (67 commits) ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346 ACPI: APEI: EINJ: Refactor available_error_type_show() ACPI: APEI: EINJ: Fix formatting errors ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value ACPI: processor: perflib: Rearrange acpi_processor_notify_smm() ACPI: processor: perflib: Rearrange unregistration routine ACPI: processor: perflib: Drop redundant parentheses ACPI: processor: perflib: Adjust white space ACPI: processor: idle: Drop unnecessary statements and parens ACPI: thermal: Adjust critical.flags.valid check ACPI: fan: Convert to use sysfs_emit_at() API ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() ACPI: battery: Call power_supply_changed() when adding hooks ACPI: use sysfs_emit() instead of scnprintf() ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F) ACPI: APEI: Remove a useless include PNP: Do not disable devices on suspend when they cannot be re-enabled on resume ACPI: processor: Silence missing prototype warnings ACPI: processor_idle: Silence missing prototype warnings ACPI: PM: Silence missing prototype warning ...
2022-12-12Merge tag 'pm-6.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These include two new drivers (cpufreq driver for Apple SoC CPU P-states and the SCMI Powercap based power capping driver), other new hardware support and driver extensions (Qualcomm cpufreq driver and its DT bindings, TI cpufreq driver, intel_pstate, intel-uncore-freq), a bunch of fixes and cleanups all over and a cpupower utility update including new features related to RAPL support. Specifics: - Fix nasty and hard to debug race condition introduced by mistake in the runtime PM core code and clean up that code somewhat on top of the fix (Rafael Wysocki) - Generalize of_perf_domain_get_sharing_cpumask phandle format (Hector Martin) - Add new cpufreq driver for Apple SoC CPU P-states (Hector Martin) - Update Qualcomm cpufreq driver (Manivannan Sadhasivam, Chen Hui): - CPU clock provider support - Generic cleanups or reorganization - Potential memleak fix - Fix of the return value of cpufreq_driver->get() - Update Qualcomm cpufreq driver's DT bindings (Manivannan Sadhasivam, Rob Herring, Melody Olvera): - Support for CPU clock provider - Missing cache-related properties fixes - Support for QDU1000/QRU1000 - Add support for ti,am625 SoC and enable build of ti-cpufreq for ARCH_K3 (Dave Gerlach, and Vibhore Vardhan) - Use flexible array to simplify memory allocation in the tegra186 cpufreq driver (Christophe JAILLET) - Convert cpufreq statistics code to use sysfs_emit_at() (ye xingchen) - Allow intel_pstate to use no-HWP mode on Sapphire Rapids (Giovanni Gherdovich) - Add missing pci_dev_put() to the amd_freq_sensitivity cpufreq driver (Xiongfeng Wang) - Initialize the kobj_unregister completion before calling kobject_init_and_add() in the cpufreq core code (Yongqiang Liu) - Defer setting boost MSRs in the ACPI cpufreq driver (Stuart Hayes, Nathan Chancellor) - Make intel_pstate accept initial EPP value of 0x80 (Srinivas Pandruvada) - Make read-only array sys_clk_src in the SPEAr cpufreq driver static (Colin Ian King) - Make array speeds in the longhaul cpufreq driver static (Colin Ian King) - Use str_enabled_disabled() helper in the ACPI cpufreq driver (Andy Shevchenko) - Drop a reference to CVS from cpufreq documentation (Conghui Wang) - Improve kernel messages printed by the PSCI cpuidle driver (Ulf Hansson) - Make the DT cpuidle driver return the correct number of parsed idle states, clean it up and clarify a comment in it (Ulf Hansson) - Modify the tasks freezing code to avoid using pr_cont() and refine an error message printed by it (Rafael Wysocki) - Make the hibernation core code complain about memory map mismatches during resume to help diagnostics (Xueqin Luo) - Fix mistake in a kerneldoc comment in the hibernation code (xiongxin) - Reverse the order of performance and enabling operations in the generic power domains code (Abel Vesa) - Power off[on] domains in hibernate .freeze[thaw]_noirq hook of in the generic power domains code (Abel Vesa) - Consolidate genpd_restore_noirq() and genpd_resume_noirq() (Shawn Guo) - Pass generic PM noirq hooks to genpd_finish_suspend() (Shawn Guo) - Drop generic power domain status manipulation during hibernate restore (Shawn Guo) - Fix compiler warnings with make W=1 in the idle_inject power capping driver (Srinivas Pandruvada) - Use kstrtobool() instead of strtobool() in the power capping sysfs interface (Christophe JAILLET) - Add SCMI Powercap based power capping driver (Cristian Marussi) - Add Emerald Rapids support to the intel-uncore-freq driver (Artem Bityutskiy) - Repair slips in kernel-doc comments in the generic notifier code (Lukas Bulwahn) - Fix several DT issues in the OPP library reorganize code around opp-microvolt-<named> DT property (Viresh Kumar) - Allow any of opp-microvolt, opp-microamp, or opp-microwatt properties to be present without the others present (James Calligeros) - Fix clock-latency-ns property in DT example (Serge Semin) - Add a private governor_data for devfreq governors (Kant Fan) - Reorganize devfreq code to use device_match_of_node() and devm_platform_get_and_ioremap_resource() instead of open coding them (ye xingchen, Minghao Chi) - Make cpupower choose base_cpu to display default cpupower details instead of picking CPU 0 (Saket Kumar Bhaskar) - Add Georgian translation to cpupower documentation (Zurab Kargareteli) - Introduce powercap intel-rapl library, powercap-info command, and RAPL monitor into cpupower (Thomas Renninger)" * tag 'pm-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits) PM: runtime: Adjust white space in the core code cpufreq: Remove CVS version control contents from documentation cpufreq: stats: Convert to use sysfs_emit_at() API cpufreq: ACPI: Only set boost MSRs on supported CPUs PM: sleep: Refine error message in try_to_freeze_tasks() PM: sleep: Avoid using pr_cont() in the tasks freezing code PM: runtime: Relocate rpm_callback() right after __rpm_callback() PM: runtime: Do not call __rpm_callback() from rpm_idle() PM / devfreq: event: use devm_platform_get_and_ioremap_resource() PM / devfreq: event: Use device_match_of_node() PM / devfreq: Use device_match_of_node() powercap: idle_inject: Fix warnings with make W=1 PM: hibernate: Complain about memory map mismatches during resume dt-bindings: cpufreq: cpufreq-qcom-hw: Add QDU1000/QRU1000 cpufreq cpufreq: tegra186: Use flexible array to simplify memory allocation cpupower: rapl monitor - shows the used power consumption in uj for each rapl domain cpupower: Introduce powercap intel-rapl library and powercap-info command cpupower: Add Georgian translation cpufreq: intel_pstate: Add Sapphire Rapids support in no-HWP mode cpufreq: amd_freq_sensitivity: Add missing pci_dev_put() ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 01:19:16 +0000