summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-07-09PCI: dwc: Fix index 0 incorrectly being interpreted as a free ATU slotFrank Li
When PERST# assert and deassert happens on the PERST# supported platforms, both iATU0 and iATU6 will map inbound window to BAR0. DMA will access the area that was previously allocated (iATU0) for BAR0, instead of the new area (iATU6) for BAR0. Right now, this isn't an issue because both iATU0 and iATU6 should translate inbound accesses to BAR0 to the same allocated memory area. However, having two separate inbound mappings for the same BAR is a disaster waiting to happen. The mappings between PCI BAR and iATU inbound window are maintained in the dw_pcie_ep::bar_to_atu[] array. While allocating a new inbound iATU map for a BAR, dw_pcie_ep_inbound_atu() API checks for the availability of the existing mapping in the array and if it is not found (i.e., value in the array indexed by the BAR is found to be 0), it allocates a new map value using find_first_zero_bit(). The issue is the existing logic failed to consider the fact that the map value '0' is a valid value for BAR0, so find_first_zero_bit() will return '0' as the map value for BAR0 (note that it returns the first zero bit position). Due to this, when PERST# assert + deassert happens on the PERST# supported platforms, the inbound window allocation restarts from BAR0 and the existing logic to find the BAR mapping will return '6' for BAR0 instead of '0' due to the fact that it considers '0' as an invalid map value. Fix this issue by always incrementing the map value before assigning to bar_to_atu[] array and then decrementing it while fetching. This will make sure that the map value '0' always represents the invalid mapping." Fixes: 4284c88fff0e ("PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address") Closes: https://lore.kernel.org/linux-pci/ZXsRp+Lzg3x%2Fnhk3@x1-carbon/ Link: https://lore.kernel.org/linux-pci/20240412160841.925927-1-Frank.Li@nxp.com Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com> Tested-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
2024-07-09PCI: dwc: Use msleep() in dw_pcie_wait_for_link()Konrad Dybcio
According to [1], msleep should be used for large sleeps, such as the 100-ish ms one in this function. Comply with the guide and use it. [1] https://docs.kernel.org/timers/timers-howto.html [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240215-topic-pci_sleep-v2-1-79334884546b@linaro.org Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09misc: pci_endpoint_test: Remove unused pci_endpoint_test_bar_{readl,writel} ↵Jiapeng Chong
functions These two functions are defined in the pci_endpoint_test.c file, but not called elsewhere, so delete these unused functions. This fixes the following warning: drivers/misc/pci_endpoint_test.c:144:19: warning: unused function 'pci_endpoint_test_bar_readl'. drivers/misc/pci_endpoint_test.c:150:20: warning: unused function 'pci_endpoint_test_bar_writel'. No functional changes intended. [kwilczynski: commit log] Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9064 Link: https://lore.kernel.org/linux-pci/20240704023227.87039-1-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-07-09misc: pci_endpoint_test: Document policy about adding pci_device_idYoshihiro Shimoda
Add a comment suggesting that if the endpoint controller Vendor and Device ID are programmable, an existing entry might be usable for testing without having to add an entry to pci_endpoint_test_tbl[]. Link: https://lore.kernel.org/linux-pci/20240611125057.1232873-6-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com>
2024-07-09misc: pci_endpoint_test: Refactor dma_set_mask_and_coherent() logicFrank Li
dma_set_mask_and_coherent() should never fail when the mask is >= 32bit, unless the architecture has no DMA support. So no need to check for the error and also no need to set dma_set_mask_and_coherent(32) as a fallback. Even if dma_set_mask_and_coherent(48) fails due to the lack of DMA support (theoretically), then dma_set_mask_and_coherent(32) will also fail for the same reason. So the fallback doesn't make sense. Simplify the code by setting the streaming and coherent DMA mask to 48 bits. Link: https://lore.kernel.org/linux-pci/20240502195903.3191049-1-Frank.Li@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-07-09misc: pci_endpoint_test: Use memcpy_toio()/memcpy_fromio() for BAR testsNiklas Cassel
The current code uses writel()/readl(), which has an implicit memory barrier for every single readl()/writel(). Additionally, reading 4 bytes at a time over the PCI bus is not really optimal, considering that this code is running in an ioctl handler. Use memcpy_toio()/memcpy_fromio() for BAR tests. Before patch with a 4MB BAR: $ time /usr/bin/pcitest -b 1 BAR1: OKAY real 0m 1.56s After patch with a 4MB BAR: $ time /usr/bin/pcitest -b 1 BAR1: OKAY real 0m 0.54s Link: https://lore.kernel.org/linux-pci/20240322164139.678228-1-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2024-07-09misc: pci_endpoint_test: Add support for Rockchip rk3588Niklas Cassel
Rockchip rk3588 requires 64KB alignment for BARs. While there is an existing device_id:vendor_id in the driver with 64KB alignment, that device_id:vendor_id is am654, which uses BAR2 instead of BAR0 as the test_reg_bar, and also has special is_am654_pci_dev() checks in the driver to disallow BAR0. In order to allow testing all BARs, add a new rk3588 entry in the driver. We intentionally do not add the vendor id to pci_ids.h, since the policy for that file is that the vendor id has to be used by multiple drivers. Hopefully, this new entry will be short-lived, as there is a series on the mailing list which intends to move the address alignment restrictions from this driver to the endpoint side. Add a new entry for rk3588 in order to allow us to test all BARs. Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-11-0a042d6b0049@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-04PCI: endpoint: Fix error handling in epf_ntb_epc_cleanup()Dan Carpenter
There are two issues related to epf_ntb_epc_cleanup(): 1) It should call epf_ntb_config_sspad_bar_clear() 2) The epf_ntb_bind() function should call epf_ntb_epc_cleanup() to cleanup. I also changed the ordering a bit. Unwinding should be done in the mirror order from how they are allocated. Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP") Link: https://lore.kernel.org/linux-pci/aaffbe8d-7094-4083-8146-185f4a84e8a1@moroto.mountain Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-07-04PCI: endpoint: Clean up error handling in vpci_scan_bus()Dan Carpenter
Smatch complains about inconsistent NULL checking in vpci_scan_bus(): drivers/pci/endpoint/functions/pci-epf-vntb.c:1024 vpci_scan_bus() error: we previously assumed 'vpci_bus' could be null (see line 1021) Instead of printing an error message and then crashing we should return an error code and clean up. Also the NULL check is reversed so it prints an error for success instead of failure. Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP") Link: https://lore.kernel.org/linux-pci/68e0f6a4-fd57-45d0-945b-0876f2c8cb86@moroto.mountain Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-07-04PCI: endpoint: Make pci_epc_class struct constantGreg Kroah-Hartman
Now that the driver core allows for struct class to be in read-only memory, we should make all 'class' structures declared at build time placing them into read-only memory, instead of having to be dynamically allocated at runtime. Link: https://lore.kernel.org/linux-pci/2024061011-citable-herbicide-1095@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2024-07-04PCI: endpoint: Introduce 'epc_deinit' event and notify the EPF driversManivannan Sadhasivam
As like the 'epc_init' event, that is used to signal the EPF drivers about the EPC initialization, let's introduce 'epc_deinit' event that is used to signal EPC deinitialization. The EPC deinitialization applies only when any sort of fundamental reset is supported by the endpoint controller as per the PCIe spec. Reference: PCIe r6.0, sec 4.2.5.9.1 and 6.6.1. Currently, some EPC drivers like pcie-qcom-ep and pcie-tegra194 support PERST# as the fundamental reset. So the 'deinit' event will be notified to the EPF drivers when PERST# assert happens in the above mentioned EPC drivers. The EPF drivers, on receiving the event through the epc_deinit() callback should reset the EPF state machine and also cleanup any configuration that got affected by the fundamental reset like BAR, DMA etc... This change also warrants skipping the cleanups in unbind() if already done in epc_deinit(). Link: https://lore.kernel.org/r/20240606-pci-deinit-v1-2-4395534520dc@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Frank Li <Frank.Li@nxp.com>
2024-05-28PCI: endpoint: pci-epf-test: Handle Link Down eventManivannan Sadhasivam
Per PCIe r6.0, sec 5.2, a Link Down event can happen under any of the following circumstances: 1. Fundamental/Hot reset 2. Link disable transmission by upstream component 3. Moving from L2/L3 to L0 When the event happens, the EPC driver capable of detecting it may pass the notification to the EPF driver through link_down() callback in 'struct pci_epc_event_ops'. While the PCIe spec has not defined the actual behavior of the endpoint when the Link Down event happens, we may assume that at least the ongoing transactions need to be stopped as the link won't be active, so cancel the command handler work in the callback implementation pci_epf_test_link_down(). The work will be started again in pci_epf_test_link_up() once the link comes back again. Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-10-22832d0d456f@linaro.org Tested-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: update spec citation] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-05-28PCI: endpoint: pci-epf-{mhi/test}: Move DMA initialization to EPC init callbackManivannan Sadhasivam
To maintain uniformity across EPF drivers, move DMA initialization to EPC init callback. This will also allow us to deinit DMA during PERST# assert in the further commits. For EPC drivers without PERST#, DMA deinit will only happen during driver unbind. Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-6-22832d0d456f@linaro.org Tested-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-05-28PCI: endpoint: pci-epf-test: Refactor pci_epf_test_unbind() functionManivannan Sadhasivam
Move the pci_epc_clear_bar() and pci_epf_free_space() code to respective helper functions. This allows reusing the helpers in future commits. This also requires moving the pci_epf_test_unbind() definition below pci_epf_test_bind() to avoid forward declaration of the above helpers. No functional change. Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-5-22832d0d456f@linaro.org Tested-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-05-28PCI: endpoint: Rename BME to Bus Master EnableManivannan Sadhasivam
BME which stands for 'Bus Master Enable' is not defined in the PCIe base spec even though it is commonly referred in many places (vendor docs). To align with the spec, rename it to its expansion 'Bus Master Enable'. Suggested-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-3-22832d0d456f@linaro.org Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-4-22832d0d456f@linaro.org Tested-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: squash removal of irrelevant 'Link is enabled'] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-05-28PCI: endpoint: Rename core_init() callback in 'struct pci_epc_event_ops' to ↵Manivannan Sadhasivam
epc_init() core_init() callback is used to notify the EPC initialization event to the EPF drivers. The 'core' prefix was used indicate that the controller IP core has completed initialization. But it serves no purpose as the EPF driver will only care about the EPC initialization as a whole and there is no real benefit to distinguish the IP core part. Rename the core_init() callback in 'struct pci_epc_event_ops' to epc_init() to make it more clear. Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-2-22832d0d456f@linaro.org Tested-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-05-28PCI: endpoint: pci-epf-test: Use 'msix_capable' flag directly in ↵Manivannan Sadhasivam
pci_epf_test_alloc_space() Instead of using a local variable to cache the 'msix_capable' flag, use it directly to simplify the code. Suggested-by: Niklas Cassel <cassel@kernel.org> Link: https://lore.kernel.org/linux-pci/20240418-pci-epf-test-fix-v2-2-eacd54831444@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-05-28PCI: endpoint: pci-epf-test: Make use of cached 'epc_features' in ↵Manivannan Sadhasivam
pci_epf_test_core_init() Instead of getting the epc_features from pci_epc_get_features() API, use the cached pci_epf_test::epc_features value to avoid the NULL check. Since the NULL check is already performed in pci_epf_test_bind(), having one more check in pci_epf_test_core_init() is redundant and it is not possible to hit the NULL pointer dereference. Also with commit a01e7214bef9 ("PCI: endpoint: Remove "core_init_notifier" flag"), 'epc_features' got dereferenced without the NULL check, leading to the following false positive Smatch warning: drivers/pci/endpoint/functions/pci-epf-test.c:784 pci_epf_test_core_init() error: we previously assumed 'epc_features' could be null (see line 747) Thus, remove the redundant NULL check and also use the epc_features:: {msix_capable/msi_capable} flags directly to avoid local variables. [kwilczynski: commit log] Fixes: 5e50ee27d4a5 ("PCI: pci-epf-test: Add support to defer core initialization") Closes: https://lore.kernel.org/linux-pci/024b5826-7180-4076-ae08-57d2584cca3f@moroto.mountain Link: https://lore.kernel.org/linux-pci/20240418-pci-epf-test-fix-v2-1-eacd54831444@linaro.org Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-05-28PCI: endpoint: Remove unused field in struct pci_epf_groupChristophe JAILLET
In "struct pci_epf_group", the 'type_group' field is unused. This was added, but already unused, by commit 70b3740f2c19 ("PCI: endpoint: Automatically create a function specific attributes group"). Thus, remove it. Found with cppcheck, unusedStructMember. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/6507d44b6c60a19af35a605e2d58050be8872ab6.1712341008.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-05-25Merge tag 'for-linus-6.10-1' of https://github.com/cminyard/linux-ipmiLinus Torvalds
Pull ipmi updates from Corey Minyard: "Mostly updates for deprecated interfaces, platform.remove and converting from a tasklet to a BH workqueue. Also use HAS_IOPORT for disabling inb()/outb()" * tag 'for-linus-6.10-1' of https://github.com/cminyard/linux-ipmi: ipmi: kcs_bmc_npcm7xx: Convert to platform remove callback returning void ipmi: kcs_bmc_aspeed: Convert to platform remove callback returning void ipmi: ipmi_ssif: Convert to platform remove callback returning void ipmi: ipmi_si_platform: Convert to platform remove callback returning void ipmi: ipmi_powernv: Convert to platform remove callback returning void ipmi: bt-bmc: Convert to platform remove callback returning void char: ipmi: handle HAS_IOPORT dependencies ipmi: Convert from tasklet to BH workqueue
2024-05-25Merge tag 'rtc-6.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "There is one new driver and then most of the changes are the device tree bindings conversions to yaml. New driver: - Epson RX8111 Drivers: - Many Device Tree bindings conversions to dtschema - pcf8563: wakeup-source support" * tag 'rtc-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: pcf8563: add wakeup-source support rtc: rx8111: handle VLOW flag rtc: rx8111: demote warnings to debug level rtc: rx6110: Constify struct regmap_config dt-bindings: rtc: convert trivial devices into dtschema dt-bindings: rtc: stmp3xxx-rtc: convert to dtschema dt-bindings: rtc: pxa-rtc: convert to dtschema rtc: Add driver for Epson RX8111 dt-bindings: rtc: Add Epson RX8111 rtc: mcp795: drop unneeded MODULE_ALIAS rtc: nuvoton: Modify part number value rtc: test: Split rtc unit test into slow and normal speed test dt-bindings: rtc: nxp,lpc1788-rtc: convert to dtschema dt-bindings: rtc: digicolor-rtc: move to trivial-rtc dt-bindings: rtc: alphascale,asm9260-rtc: convert to dtschema dt-bindings: rtc: armada-380-rtc: convert to dtschema rtc: cros-ec: provide ID table for avoiding fallback match
2024-05-25Merge tag 'i3c/for-6.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3c updates from Alexandre Belloni: "Runtime PM (power management) is improved and hot-join support has been added to the dw controller driver. Core: - Allow device driver to trigger controller runtime PM Drivers: - dw: hot-join support - svc: better IBI handling" * tag 'i3c/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: dw: Add hot-join support. i3c: master: Enable runtime PM for master controller i3c: master: svc: fix invalidate IBI type and miss call client IBI handler i3c: master: svc: change ENXIO to EAGAIN when IBI occurs during start frame i3c: Add comment for -EAGAIN in i3c_device_do_priv_xfers()
2024-05-24Merge tag 'drm-next-2024-05-25' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Some fixes for the end of the merge window, mostly amdgpu and panthor, with one nouveau uAPI change that fixes a bad decision we made a few months back. nouveau: - fix bo metadata uAPI for vm bind panthor: - Fixes for panthor's heap logical block. - Reset on unrecoverable fault - Fix VM references. - Reset fix. xlnx: - xlnx compile and doc fixes. amdgpu: - Handle vbios table integrated info v2.3 amdkfd: - Handle duplicate BOs in reserve_bo_and_cond_vms - Handle memory limitations on small APUs dp/mst: - MST null deref fix. bridge: - Don't let next bridge create connector in adv7511 to make probe work" * tag 'drm-next-2024-05-25' of https://gitlab.freedesktop.org/drm/kernel: drm/amdgpu/atomfirmware: add intergrated info v2.3 table drm/mst: Fix NULL pointer dereference at drm_dp_add_payload_part2 drm/amdkfd: Let VRAM allocations go to GTT domain on small APUs drm/amdkfd: handle duplicate BOs in reserve_bo_and_cond_vms drm/bridge: adv7511: Attach next bridge without creating connector drm/buddy: Fix the warn on's during force merge drm/nouveau: use tile_mode and pte_kind for VM_BIND bo allocations drm/panthor: Call panthor_sched_post_reset() even if the reset failed drm/panthor: Reset the FW VM to NULL on unplug drm/panthor: Keep a ref to the VM at the panthor_kernel_bo level drm/panthor: Force an immediate reset on unrecoverable faults drm/panthor: Document drm_panthor_tiler_heap_destroy::handle validity constraints drm/panthor: Fix an off-by-one in the heap context retrieval logic drm/panthor: Relax the constraints on the tiler chunk size drm/panthor: Make sure the tiler initial/max chunks are consistent drm/panthor: Fix tiler OOM handling to allow incremental rendering drm: xlnx: zynqmp_dpsub: Fix compilation error drm: xlnx: zynqmp_dpsub: Fix few function comments
2024-05-24Merge tag 'riscv-for-linus-6.10-mw2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - The compression format used for boot images is now configurable at build time, and these formats are shown in `make help` - access_ok() has been optimized - A pair of performance bugs have been fixed in the uaccess handlers - Various fixes and cleanups, including one for the IMSIC build failure and one for the early-boot ftrace illegal NOPs bug * tag 'riscv-for-linus-6.10-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fix early ftrace nop patching irqchip: riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict riscv: selftests: Add signal handling vector tests riscv: mm: accelerate pagefault when badaccess riscv: uaccess: Relax the threshold for fast path riscv: uaccess: Allow the last potential unrolled copy riscv: typo in comment for get_f64_reg Use bool value in set_cpu_online() riscv: selftests: Add hwprobe binaries to .gitignore riscv: stacktrace: fixed walk_stackframe() ftrace: riscv: move from REGS to ARGS riscv: do not select MODULE_SECTIONS by default riscv: show help string for riscv-specific targets riscv: make image compression configurable riscv: cpufeature: Fix extension subset checking riscv: cpufeature: Fix thead vector hwcap removal riscv: rewrite __kernel_map_pages() to fix sleeping in invalid context riscv: force PAGE_SIZE linear mapping if debug_pagealloc is enabled riscv: Define TASK_SIZE_MAX for __access_ok() riscv: Remove PGDIR_SIZE_L3 and TASK_SIZE_MIN
2024-05-24Merge tag 'for-linus-6.10a-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - a small cleanup in the drivers/xen/xenbus Makefile - a fix of the Xen xenstore driver to improve connecting to a late started Xenstore - an enhancement for better support of ballooning in PVH guests - a cleanup using try_cmpxchg() instead of open coding it * tag 'for-linus-6.10a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: drivers/xen: Improve the late XenStore init protocol xen/xenbus: Use *-y instead of *-objs in Makefile xen/x86: add extra pages to unpopulated-alloc if available locking/x86/xen: Use try_cmpxchg() in xen_alloc_p2m_entry()
2024-05-24Merge tag 'input-for-v6.10-rc0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a change to input core to trim amount of keys data in modalias string in case when a device declares too many keys and they do not fit in uevent buffer instead of reporting an error which results in uevent not being generated at all - support for Machenike G5 Pro Controller added to xpad driver - support for FocalTech FT5452 and FT8719 added to edt-ft5x06 - support for new SPMI vibrator added to pm8xxx-vibrator driver - missing locking added to cyapa touchpad driver - removal of unused fields in various driver structures - explicit initialization of i2c_device_id::driver_data to 0 dropped from input drivers - other assorted fixes and cleanups. * tag 'input-for-v6.10-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits) Input: edt-ft5x06 - add support for FocalTech FT5452 and FT8719 dt-bindings: input: touchscreen: edt-ft5x06: Document FT5452 and FT8719 support Input: xpad - add support for Machenike G5 Pro Controller Input: try trimming too long modalias strings Input: drop explicit initialization of struct i2c_device_id::driver_data to 0 Input: zet6223 - remove an unused field in struct zet6223_ts Input: chipone_icn8505 - remove an unused field in struct icn8505_data Input: cros_ec_keyb - remove an unused field in struct cros_ec_keyb Input: lpc32xx-keys - remove an unused field in struct lpc32xx_kscan_drv Input: matrix_keypad - remove an unused field in struct matrix_keypad Input: tca6416-keypad - remove unused struct tca6416_drv_data Input: tca6416-keypad - remove an unused field in struct tca6416_keypad_chip Input: da7280 - remove an unused field in struct da7280_haptic Input: ff-core - prefer struct_size over open coded arithmetic Input: cyapa - add missing input core locking to suspend/resume functions input: pm8xxx-vibrator: add new SPMI vibrator support dt-bindings: input: qcom,pm8xxx-vib: add new SPMI vibrator module input: pm8xxx-vibrator: refactor to support new SPMI vibrator Input: pm8xxx-vibrator - correct VIB_MAX_LEVELS calculation Input: sur40 - convert le16 to cpu before use ...
2024-05-24Merge tag 'char-misc-6.10-rc1-fix' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fix from Greg KH: "Here is one remaining bugfix for 6.10-rc1 that missed the 6.9-final merge window, and has been sitting in my tree and linux-next for quite a while now, but wasn't sent to you (my fault, travels...) It is a bugfix to resolve an error in the speakup code that could overflow a buffer. It has been in linux-next for a while with no reported problems" * tag 'char-misc-6.10-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: speakup: Fix sizeof() vs ARRAY_SIZE() bug
2024-05-24Merge tag 'tty-6.10-rc1-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small TTY and Serial driver fixes that missed the 6.9-final merge window, but have been in my tree for weeks (my fault, travel caused me to miss this) These fixes include: - more n_gsm fixes for reported problems - 8520_mtk driver fix - 8250_bcm7271 driver fix - sc16is7xx driver fix All of these have been in linux-next for weeks without any reported problems" * tag 'tty-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: sc16is7xx: fix bug in sc16is7xx_set_baud() when using prescaler serial: 8250_bcm7271: use default_mux_rate if possible serial: 8520_mtk: Set RTS on shutdown for Rx in-band wakeup tty: n_gsm: fix missing receive state reset after mode switch tty: n_gsm: fix possible out-of-bounds in gsm0_receive()
2024-05-23Merge tag 'block-6.10-20240523' of git://git.kernel.dk/linuxLinus Torvalds
Pull more block updates from Jens Axboe: "Followup block updates, mostly due to NVMe being a bit late to the party. But nothing major in there, so not a big deal. In detail, this contains: - NVMe pull request via Keith: - Fabrics connection retries (Daniel, Hannes) - Fabrics logging enhancements (Tokunori) - RDMA delete optimization (Sagi) - ublk DMA alignment fix (me) - null_blk sparse warning fixes (Bart) - Discard support for brd (Keith) - blk-cgroup list corruption fixes (Ming) - blk-cgroup stat propagation fix (Waiman) - Regression fix for plugging stall with md (Yu) - Misc fixes or cleanups (David, Jeff, Justin)" * tag 'block-6.10-20240523' of git://git.kernel.dk/linux: (24 commits) null_blk: fix null-ptr-dereference while configuring 'power' and 'submit_queues' blk-throttle: remove unused struct 'avg_latency_bucket' block: fix lost bio for plug enabled bio based device block: t10-pi: add MODULE_DESCRIPTION() blk-mq: add helper for checking if one CPU is mapped to specified hctx blk-cgroup: Properly propagate the iostat update up the hierarchy blk-cgroup: fix list corruption from reorder of WRITE ->lqueued blk-cgroup: fix list corruption from resetting io stat cdrom: rearrange last_media_change check to avoid unintentional overflow nbd: Fix signal handling nbd: Remove a local variable from nbd_send_cmd() nbd: Improve the documentation of the locking assumptions nbd: Remove superfluous casts nbd: Use NULL to represent a pointer brd: implement discard support null_blk: Fix two sparse warnings ublk_drv: set DMA alignment mask to 3 nvme-rdma, nvme-tcp: include max reconnects for reconnect logging nvmet-rdma: Avoid o(n^2) loop in delete_ctrl nvme: do not retry authentication failures ...
2024-05-23Merge tag 'regulator-fix-v6.10-merge-window' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A bunch of fixes that came in during the merge window. Matti found several issues with some of the more complexly configured Rohm regulators and the helpers they use and there were some errors in the specification of tps6594 when regulators are grouped together" * tag 'regulator-fix-v6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: tps6594-regulator: Correct multi-phase configuration regulator: tps6287x: Force writing VSEL bit regulator: pickable ranges: don't always cache vsel regulator: rohm-regulator: warn if unsupported voltage is set regulator: bd71828: Don't overwrite runtime voltages
2024-05-23Merge tag 'regmap-fix-v6.10-merge-window' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fix from Mark Brown: "Guenter ran with memory sanitisers and found an issue in the new KUnit tests that Richard added where an assumption in older test code was exposed, this was fixed quickly by Richard" * tag 'regmap-fix-v6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: kunit: Fix array overflow in stride() test
2024-05-23Merge tag 'net-6.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Quite smaller than usual. Notably it includes the fix for the unix regression from the past weeks. The TCP window fix will require some follow-up, already queued. Current release - regressions: - af_unix: fix garbage collection of embryos Previous releases - regressions: - af_unix: fix race between GC and receive path - ipv6: sr: fix missing sk_buff release in seg6_input_core - tcp: remove 64 KByte limit for initial tp->rcv_wnd value - eth: r8169: fix rx hangup - eth: lan966x: remove ptp traps in case the ptp is not enabled - eth: ixgbe: fix link breakage vs cisco switches - eth: ice: prevent ethtool from corrupting the channels Previous releases - always broken: - openvswitch: set the skbuff pkt_type for proper pmtud support - tcp: Fix shift-out-of-bounds in dctcp_update_alpha() Misc: - a bunch of selftests stabilization patches" * tag 'net-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (25 commits) r8169: Fix possible ring buffer corruption on fragmented Tx packets. idpf: Interpret .set_channels() input differently ice: Interpret .set_channels() input differently nfc: nci: Fix handling of zero-length payload packets in nci_rx_work() net: relax socket state check at accept time. tcp: remove 64 KByte limit for initial tp->rcv_wnd value net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe() tls: fix missing memory barrier in tls_init net: fec: avoid lock evasion when reading pps_enable Revert "ixgbe: Manual AN-37 for troublesome link partners for X550 SFI" testing: net-drv: use stats64 for testing net: mana: Fix the extra HZ in mana_hwc_send_request net: lan966x: Remove ptp traps in case the ptp is not enabled. openvswitch: Set the skbuff pkt_type for proper pmtud support. selftest: af_unix: Make SCM_RIGHTS into OOB data. af_unix: Fix garbage collection of embryos carrying OOB with SCM_RIGHTS tcp: Fix shift-out-of-bounds in dctcp_update_alpha(). selftests/net: use tc rule to filter the na packet ipv6: sr: fix memleak in seg6_hmac_init_algo af_unix: Update unix_sk(sk)->oob_skb under sk_receive_queue lock. ...
2024-05-23Merge tag 'trace-assign-str-v6.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing cleanup from Steven Rostedt: "Remove second argument of __assign_str() The __assign_str() macro logic of the TRACE_EVENT() macro was optimized so that it no longer needs the second argument. The __assign_str() is always matched with __string() field that takes a field name and the source for that field: __string(field, source) The TRACE_EVENT() macro logic will save off the source value and then use that value to copy into the ring buffer via the __assign_str(). Before commit c1fa617caeb0 ("tracing: Rework __assign_str() and __string() to not duplicate getting the string"), the __assign_str() needed the second argument which would perform the same logic as the __string() source parameter did. Not only would this add overhead, but it was error prone as if the __assign_str() source produced something different, it may not have allocated enough for the string in the ring buffer (as the __string() source was used to determine how much to allocate) Now that the __assign_str() just uses the same string that was used in __string() it no longer needs the source parameter. It can now be removed" * tag 'trace-assign-str-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/treewide: Remove second parameter of __assign_str()
2024-05-23Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "The major fix here is for a filesystem corruption issue reported on Apple M1 as a result of buggy management of the floating point register state introduced in 6.8. I initially reverted one of the offending patches, but in the end Ard cooked a proper fix so there's a revert+reapply in the series. Aside from that, we've got some CPU errata workarounds and misc other fixes. - Fix broken FP register state tracking which resulted in filesystem corruption when dm-crypt is used - Workarounds for Arm CPU errata affecting the SSBS Spectre mitigation - Fix lockdep assertion in DMC620 memory controller PMU driver - Fix alignment of BUG table when CONFIG_DEBUG_BUGVERBOSE is disabled" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/fpsimd: Avoid erroneous elide of user state reload Reapply "arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD" arm64: asm-bug: Add .align 2 to the end of __BUG_ENTRY perf/arm-dmc620: Fix lockdep assert in ->event_init() Revert "arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD" arm64: errata: Add workaround for Arm errata 3194386 and 3312417 arm64: cputype: Add Neoverse-V3 definitions arm64: cputype: Add Cortex-X4 definitions arm64: barrier: Restore spec_bar() macro
2024-05-23Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: "Several new features here: - virtio-net is finally supported in vduse - virtio (balloon and mem) interaction with suspend is improved - vhost-scsi now handles signals better/faster And fixes, cleanups all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits) virtio-pci: Check if is_avq is NULL virtio: delete vq in vp_find_vqs_msix() when request_irq() fails MAINTAINERS: add Eugenio Pérez as reviewer vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API vp_vdpa: don't allocate unused msix vectors sound: virtio: drop owner assignment fuse: virtio: drop owner assignment scsi: virtio: drop owner assignment rpmsg: virtio: drop owner assignment nvdimm: virtio_pmem: drop owner assignment wifi: mac80211_hwsim: drop owner assignment vsock/virtio: drop owner assignment net: 9p: virtio: drop owner assignment net: virtio: drop owner assignment net: caif: virtio: drop owner assignment misc: nsm: drop owner assignment iommu: virtio: drop owner assignment drm/virtio: drop owner assignment gpio: virtio: drop owner assignment firmware: arm_scmi: virtio: drop owner assignment ...
2024-05-23r8169: Fix possible ring buffer corruption on fragmented Tx packets.Ken Milmore
An issue was found on the RTL8125b when transmitting small fragmented packets, whereby invalid entries were inserted into the transmit ring buffer, subsequently leading to calls to dma_unmap_single() with a null address. This was caused by rtl8169_start_xmit() not noticing changes to nr_frags which may occur when small packets are padded (to work around hardware quirks) in rtl8169_tso_csum_v2(). To fix this, postpone inspecting nr_frags until after any padding has been applied. Fixes: 9020845fb5d6 ("r8169: improve rtl8169_start_xmit") Cc: stable@vger.kernel.org Signed-off-by: Ken Milmore <ken.milmore@gmail.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/27ead18b-c23d-4f49-a020-1fc482c5ac95@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-23null_blk: fix null-ptr-dereference while configuring 'power' and 'submit_queues'Yu Kuai
Writing 'power' and 'submit_queues' concurrently will trigger kernel panic: Test script: modprobe null_blk nr_devices=0 mkdir -p /sys/kernel/config/nullb/nullb0 while true; do echo 1 > submit_queues; echo 4 > submit_queues; done & while true; do echo 1 > power; echo 0 > power; done Test result: BUG: kernel NULL pointer dereference, address: 0000000000000148 Oops: 0000 [#1] PREEMPT SMP RIP: 0010:__lock_acquire+0x41d/0x28f0 Call Trace: <TASK> lock_acquire+0x121/0x450 down_write+0x5f/0x1d0 simple_recursive_removal+0x12f/0x5c0 blk_mq_debugfs_unregister_hctxs+0x7c/0x100 blk_mq_update_nr_hw_queues+0x4a3/0x720 nullb_update_nr_hw_queues+0x71/0xf0 [null_blk] nullb_device_submit_queues_store+0x79/0xf0 [null_blk] configfs_write_iter+0x119/0x1e0 vfs_write+0x326/0x730 ksys_write+0x74/0x150 This is because del_gendisk() can concurrent with blk_mq_update_nr_hw_queues(): nullb_device_power_store nullb_apply_submit_queues null_del_dev del_gendisk nullb_update_nr_hw_queues if (!dev->nullb) // still set while gendisk is deleted return 0 blk_mq_update_nr_hw_queues dev->nullb = NULL Fix this problem by resuing the global mutex to protect nullb_device_power_store() and nullb_update_nr_hw_queues() from configfs. Fixes: 45919fbfe1c4 ("null_blk: Enable modifying 'submit_queues' after an instance has been configured") Reported-and-tested-by: Yi Zhang <yi.zhang@redhat.com> Closes: https://lore.kernel.org/all/CAHj4cs9LgsHLnjg8z06LQ3Pr5cax-+Ps+xT7AP7TPnEjStuwZA@mail.gmail.com/ Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Link: https://lore.kernel.org/r/20240523153934.1937851-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-23irqchip: riscv-imsic: Fixup riscv_ipi_set_virq_range() conflictPalmer Dabbelt
There was a semantic conflict between 21a8f8a0eb35 ("irqchip: Add RISC-V incoming MSI controller early driver") and dc892fb44322 ("riscv: Use IPIs for remote cache/TLB flushes by default") due to an API change. This manifests as a build failure post-merge. Reported-by: Tomasz Jeznach <tjeznach@rivosinc.com> Link: https://lore.kernel.org/all/mhng-10b71228-cf3e-42ca-9abf-5464b15093f1@palmer-ri-x1c9/ Fixes: 0bfbc914d943 ("Merge tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux") Reviewed-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/r/20240522184953.28531-3-palmer@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-05-23idpf: Interpret .set_channels() input differentlyLarysa Zaremba
Unlike ice, idpf does not check, if user has requested at least 1 combined channel. Instead, it relies on a check in the core code. Unfortunately, the check does not trigger for us because of the hacky .set_channels() interpretation logic that is not consistent with the core code. This naturally leads to user being able to trigger a crash with an invalid input. This is how: 1. ethtool -l <IFNAME> -> combined: 40 2. ethtool -L <IFNAME> rx 0 tx 0 combined number is not specified, so command becomes {rx_count = 0, tx_count = 0, combined_count = 40}. 3. ethnl_set_channels checks, if there is at least 1 RX and 1 TX channel, comparing (combined_count + rx_count) and (combined_count + tx_count) to zero. Obviously, (40 + 0) is greater than zero, so the core code deems the input OK. 4. idpf interprets `rx 0 tx 0` as 0 channels and tries to proceed with such configuration. The issue has to be solved fundamentally, as current logic is also known to cause AF_XDP problems in ice [0]. Interpret the command in a way that is more consistent with ethtool manual [1] (--show-channels and --set-channels) and new ice logic. Considering that in the idpf driver only the difference between RX and TX queues forms dedicated channels, change the correct way to set number of channels to: ethtool -L <IFNAME> combined 10 /* For symmetric queues */ ethtool -L <IFNAME> combined 8 tx 2 rx 0 /* For asymmetric queues */ [0] https://lore.kernel.org/netdev/20240418095857.2827-1-larysa.zaremba@intel.com/ [1] https://man7.org/linux/man-pages/man8/ethtool.8.html Fixes: 02cbfba1add5 ("idpf: add ethtool callbacks") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-23ice: Interpret .set_channels() input differentlyLarysa Zaremba
A bug occurs because a safety check guarding AF_XDP-related queues in ethnl_set_channels(), does not trigger. This happens, because kernel and ice driver interpret the ethtool command differently. How the bug occurs: 1. ethtool -l <IFNAME> -> combined: 40 2. Attach AF_XDP to queue 30 3. ethtool -L <IFNAME> rx 15 tx 15 combined number is not specified, so command becomes {rx_count = 15, tx_count = 15, combined_count = 40}. 4. ethnl_set_channels checks, if there are any AF_XDP of queues from the new (combined_count + rx_count) to the old one, so from 55 to 40, check does not trigger. 5. ice interprets `rx 15 tx 15` as 15 combined channels and deletes the queue that AF_XDP is attached to. Interpret the command in a way that is more consistent with ethtool manual [0] (--show-channels and --set-channels). Considering that in the ice driver only the difference between RX and TX queues forms dedicated channels, change the correct way to set number of channels to: ethtool -L <IFNAME> combined 10 /* For symmetric queues */ ethtool -L <IFNAME> combined 8 tx 2 rx 0 /* For asymmetric queues */ [0] https://man7.org/linux/man-pages/man8/ethtool.8.html Fixes: 87324e747fde ("ice: Implement ethtool ops for channels") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-23drivers/xen: Improve the late XenStore init protocolHenry Wang
Currently, the late XenStore init protocol is only triggered properly for the case that HVM_PARAM_STORE_PFN is ~0ULL (invalid). For the case that XenStore interface is allocated but not ready (the connection status is not XENSTORE_CONNECTED), Linux should also wait until the XenStore is set up properly. Introduce a macro to describe the XenStore interface is ready, use it in xenbus_probe_initcall() to select the code path of doing the late XenStore init protocol or not. Since now we have more than one condition for XenStore late init, rework the check in xenbus_probe() for the free_irq(). Take the opportunity to enhance the check of the allocated XenStore interface can be properly mapped, and return error early if the memremap() fails. Fixes: 5b3353949e89 ("xen: add support for initializing xenstore later as HVM domain") Signed-off-by: Henry Wang <xin.wang2@amd.com> Signed-off-by: Michal Orzel <michal.orzel@amd.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20240517011516.1451087-1-xin.wang2@amd.com Signed-off-by: Juergen Gross <jgross@suse.com>
2024-05-23net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe()Romain Gantois
In the prueth_probe() function, if one of the calls to emac_phy_connect() fails due to of_phy_connect() returning NULL, then the subsequent call to phy_attached_info() will dereference a NULL pointer. Check the return code of emac_phy_connect and fail cleanly if there is an error. Fixes: 128d5874c082 ("net: ti: icssg-prueth: Add ICSSG ethernet driver") Cc: stable@vger.kernel.org Signed-off-by: Romain Gantois <romain.gantois@bootlin.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: MD Danish Anwar <danishanwar@ti.com> Link: https://lore.kernel.org/r/20240521-icssg-prueth-fix-v1-1-b4b17b1433e9@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-23net: fec: avoid lock evasion when reading pps_enableWei Fang
The assignment of pps_enable is protected by tmreg_lock, but the read operation of pps_enable is not. So the Coverity tool reports a lock evasion warning which may cause data race to occur when running in a multithread environment. Although this issue is almost impossible to occur, we'd better fix it, at least it seems more logically reasonable, and it also prevents Coverity from continuing to issue warnings. Fixes: 278d24047891 ("net: fec: ptp: Enable PPS output based on ptp clock") Signed-off-by: Wei Fang <wei.fang@nxp.com> Link: https://lore.kernel.org/r/20240521023800.17102-1-wei.fang@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-23Revert "ixgbe: Manual AN-37 for troublesome link partners for X550 SFI"Jacob Keller
This reverts commit 565736048bd5f9888990569993c6b6bfdf6dcb6d. According to the commit, it implements a manual AN-37 for some "troublesome" Juniper MX5 switches. This appears to be a workaround for a particular switch. It has been reported that this causes a severe breakage for other switches, including a Cisco 3560CX-12PD-S. The code appears to be a workaround for a specific switch which fails to link in SFI mode. It expects to see AN-37 auto negotiation in order to link. The Cisco switch is not expecting AN-37 auto negotiation. When the device starts the manual AN-37, the Cisco switch decides that the port is confused and stops attempting to link with it. This persists until a power cycle. A simple driver unload and reload does not resolve the issue, even if loading with a version of the driver which lacks this workaround. The authors of the workaround commit have not responded with clarifications, and the result of the workaround is complete failure to connect with other switches. This appears to be a case where the driver can either "correctly" link with the Juniper MX5 switch, at the cost of bricking the link with the Cisco switch, or it can behave properly for the Cisco switch, but fail to link with the Junipir MX5 switch. I do not know enough about the standards involved to clearly determine whether either switch is at fault or behaving incorrectly. Nor do I know whether there exists some alternative fix which corrects behavior with both switches. Revert the workaround for the Juniper switch. Fixes: 565736048bd5 ("ixgbe: Manual AN-37 for troublesome link partners for X550 SFI") Link: https://lore.kernel.org/netdev/cbe874db-9ac9-42b8-afa0-88ea910e1e99@intel.com/T/ Link: https://forum.proxmox.com/threads/intel-x553-sfp-ixgbe-no-go-on-pve8.135129/#post-612291 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Jeff Daly <jeffd@silicom-usa.com> Cc: kernel.org-fo5k2w@ycharbi.fr Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240520-net-2024-05-20-revert-silicom-switch-workaround-v1-1-50f80f261c94@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-23Merge tag 'drm-misc-next-fixes-2024-05-23' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next-fixes for v6.10-rc1: - MST null deref fix. - Don't let next bridge create connector in adv7511 to make probe work. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f171b14a-ed6b-4124-893b-802a336dbe2b@linux.intel.com
2024-05-23Merge tag 'amd-drm-fixes-6.10-2024-05-22' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-fixes-6.10-2024-05-22: amdgpu: - Handle vbios table integrated info v2.3 amdkfd: - Handle duplicate BOs in reserve_bo_and_cond_vms - Handle memory limitations on small APUs Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240522185346.16716-1-alexander.deucher@amd.com
2024-05-22Merge tag 'mm-nonmm-stable-2024-05-22-17-30' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull more non-mm updates from Andrew Morton: - A series ("kbuild: enable more warnings by default") from Arnd Bergmann which enables a number of additional build-time warnings. We fixed all the fallout which we could find, there may still be a few stragglers. - Samuel Holland has developed the series "Unified cross-architecture kernel-mode FPU API". This does a lot of consolidation of per-architecture kernel-mode FPU usage and enables the use of newer AMD GPUs on RISC-V. - Tao Su has fixed some selftests build warnings in the series "Selftests: Fix compilation warnings due to missing _GNU_SOURCE definition". - This pull also includes a nilfs2 fixup from Ryusuke Konishi. * tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits) nilfs2: make block erasure safe in nilfs_finish_roll_forward() selftests/harness: use 1024 in place of LINE_MAX Revert "selftests/harness: remove use of LINE_MAX" selftests/fpu: allow building on other architectures selftests/fpu: move FP code to a separate translation unit drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORT drm/amd/display: only use hard-float, not altivec on powerpc riscv: add support for kernel-mode FPU x86: implement ARCH_HAS_KERNEL_FPU_SUPPORT powerpc: implement ARCH_HAS_KERNEL_FPU_SUPPORT LoongArch: implement ARCH_HAS_KERNEL_FPU_SUPPORT lib/raid6: use CC_FLAGS_FPU for NEON CFLAGS arm64: crypto: use CC_FLAGS_FPU for NEON CFLAGS arm64: implement ARCH_HAS_KERNEL_FPU_SUPPORT ARM: crypto: use CC_FLAGS_FPU for NEON CFLAGS ARM: implement ARCH_HAS_KERNEL_FPU_SUPPORT arch: add ARCH_HAS_KERNEL_FPU_SUPPORT x86/fpu: fix asm/fpu/types.h include guard kbuild: enable -Wcast-function-type-strict unconditionally kbuild: enable -Wformat-truncation on clang ...
2024-05-22Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 6.10 merge window.
2024-05-22tracing/treewide: Remove second parameter of __assign_str()Steven Rostedt (Google)
With the rework of how the __string() handles dynamic strings where it saves off the source string in field in the helper structure[1], the assignment of that value to the trace event field is stored in the helper value and does not need to be passed in again. This means that with: __string(field, mystring) Which use to be assigned with __assign_str(field, mystring), no longer needs the second parameter and it is unused. With this, __assign_str() will now only get a single parameter. There's over 700 users of __assign_str() and because coccinelle does not handle the TRACE_EVENT() macro I ended up using the following sed script: git grep -l __assign_str | while read a ; do sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file; mv /tmp/test-file $a; done I then searched for __assign_str() that did not end with ';' as those were multi line assignments that the sed script above would fail to catch. Note, the same updates will need to be done for: __assign_str_len() __assign_rel_str() __assign_rel_str_len() I tested this with both an allmodconfig and an allyesconfig (build only for both). [1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/ Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts. Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs Tested-by: Guenter Roeck <linux@roeck-us.net>
2024-05-23i3c: dw: Add hot-join support.Billy Tsai
Add hot-join support for dw i3c master controller. By default, the hot-join acknowledgment is disabled, and the hardware will automatically send the DISEC CCC when it receives the hot-join request. Users can use the sys entry to enable it. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20240429073624.256830-1-billy_tsai@aspeedtech.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 05:34:27 +0000